SAE 37 Flared Tube Fittings
|
|
|
- Hope Annis Stevenson
- 5 years ago
- Views:
Transcription
1 SAE 7 Flared Tube Fittings
2 7 Flared Tube SAE J5 MEETS SAE STANAR J5 If required, see SAE Standard J5 for a complete list of dimensions. NPT Tapered Pipe Treads meet te requirements of ASME/ANSIB.I.0.. All 7 Flared tube fittings piece tube assembly, can be used wit metric tube by using a metric 7 sleeve, instead of an inc sleeve. Eac dimension table sows wic metric sleeve sould be used for every size. ASSEMBY INSTRUCTIONS. Cut te tube to te proper lengt.. Slide te nut and sleeve onto te tube. (See Fig.).. Wit a special flaring tool, form te flare to 7 dimension according to SAE J5. (see page ).. Screw te nut onto te body until finger tigt. 5. From tis position, tigten te nut wit a wrenc /" turn in order to make a leakproof metal-to-metal connection. TUBING ATA FOR 7 FARE TREE-PIECE TUBE ASSEMBY In order to ensure maximum fitting reliability and performance,please take great care wen selecting te tube for eac application. Tubing sould be a fully annealed, seamless and drawn, suitable for bending and flaring, according to standard ASTM-9, AISI or 0. QUAITY engts of finised tubing sould be reasonably straigt and ave smoot ends, free from burrs. Tubing sould be free from scale and injurious defects, and it sould ave a workmanlike finis. Surface imperfections suc as andling marks, die marks, or sallow pits will not be considered injurious defects provided te imperfections are witin te tolerances specified for diameter and wall tickness. Te removal of suc imperfections is not required. (Quality SAE J5). TUBE ANING Scratces on te tube migt cause leaks. It is, terefore, important to andle te tube carefully to reduce te risk of leaks.. Tubes must not be dragged on te floor.. Tubes must not be dragged out of a tubing rack, especially in cases of large O tubes. TUBE CUTTING Two different metods can be used to cut tubes:. Tube cutter. acksaw TUBE CUTTER To attain a leakfree connection, te tubing must be cut squarely. A good quality tube cutter wit te appropriate blade for te tubing material is recommended. o not try to reduce te time of cutting by taking deep cuts wit eac turn of te cutter. Te end of te tube must be deburred to avoid damage to te fitting and to ensure tat te tube reaces te bottom of te fitting. ACKSAW CUTTING In order to cut te tube wit a acksaw and to attain square ends, te tube must be cut wit guide blocks. Tis metod of cutting requires deburring of te tube ends. WARNING o not old te tube in a vise in te place were it will be inserted into te fitting. Te vise will leave a mark on te tube tat may cause leaks and migt cause ovality.
3 7 Flared Tube SAE J5 ASSEMBY INSTRUCTIONS Perform flaring according to SAE J5. See Fig.. See Table below for dimensions. TABE : FARING A Nominal single flare diameter R S in mm in mm in mm Max Min Max Min Max Min / / 5/ / / EBURRING PRIOR TO FARING To ensure satisfactory flares are produced, it may be necessary to deburr te tube end prior to flaring. It is usually necessary to break te inside corner smootly before single flaring, and some non-ferrous tubing to eliminate is normally required to eliminate te cutoff burr wic migt oterwise create leakage pats across a substantial portion of te flare. It is acceptable to smootly break te outside corner prior to single flaring, or bot outside and inside corners prior to double flaring, on any tube material to minimize splitting. imensions are for reference only, and are subject to cange witout notice. TABE : AOWABE WORKING PRESSURE RATINGS (CAPABE OF TO MIN. BURST) Nom.SAE as Size NOTE Nom.Tube O. Inces / / 5/ / / 7 Flare Straigt Tread 5/ - - 7/ - 0 / - 0 9/ / - / - 5/ / - Nom.Pipe Size / / / SAE St. Treads Union and Bulkead (psi) Since many factors influence te pressure at wic a system will or will not perform satisfactorily, values sown in Table sould not be construed as guaranteed minimum. Fittings wit Pipe Treads (psi)
4 7 Flared Tube SAE J5 esign and Construction Te SAE 7 Flared Tube Fittings design is simple. It uses an easily produced flare at te tube end to seal and old fluid under ig pressure. Te fitting consists of tree pieces: te body,sleeve and nut. Te tube end is flared at a 7 angle (7 included angle) and eld between te fitting nose (seat) and te sleeve (support) wit te nut as sown in Fig., providing a very effective (single) seal between te fitting nose and te tube flare. Te design of SAE 7 Flared Tube Fittings is very efficient. Te fitting incorporates te smallest seal area of all fitting types.tis seal area, as seen in Fig., is only sligtly larger tan te fluid flow area. Te small seal area results in a compact design, low assembly torque, and a relatively ig-pressure capability. Tube esignator Fractional Tube O. Identify T / T / T 5/ 5T T / T 0T T T T 0T / T T Tread esignator Pipe tread TREA SIZE / / / NPT (ASME/ANSI B.0.) N N N N N N 0N N N ISO/BSP TAPER (ISO 7/,BSPT) R R R R R R 0R R R ISO/BSP PARAE (ISO /,BSPP) G G G G G G 0G G G Unified tread TREA SIZE 5/- - 7/-0 /-0 9/- - - /- /- 5/- - - /- UNIFIE TREA (ASME B.) U U U 5U U U 0U U U U 0U U U
5 7 Flared Tube SAE J5 INEX 7 Flared Tube Fitting Union JU P 5 Male Elbow P JME O-Ring Seal Male Swivel Connector JOMSC 0P Union Elbow JUE 7P Female Connector JFC 9P Female Swivel Connector JFSC P Union Tee JUT P Female Elbow JFE 0P Swivel Elbow JSE P Union Cross JUC 9P Female Run Tee JFRT P Swivel Run Tee JSRT P Bulkead Union JBU 0P Female Branc Tee JFBT P Swivel Branc Tee JSBT P Weld Bulkead Union JBUW P O-Ring Seal Male Connector(PF) JOMC-G P Plug JP 5P Female Bulkead Union JFBU P O-Ring Seal Male Connector.(UNF/UN) JOMC-U P Tube Cap JC 5P Bulkead Union Elbow JBUE P O-Ring Seal Male Elbow JOME 5P Reducer Adapter JRA P Male Connector JMC P O-Ring Seal 5 Male Elbow JOME P Blukead ock Nut JN P Male Elbow JME 5P O-Ring Seal Branc Tee JOBT 7P Nut JN 7P Male Run Tee JMRT P O-Ring Seal Run Tee JORT P Sleeve JS 7P Male Branc Tee JMBT 7P Male Swivel Connector JMSC 9P 5
6 7 Flared Tube SAE J5 JU SAE J5 Union JU-T 5/ JU-T / JU-T / 7/ JU-5T 5/ / JU-T 0 9/ JU-T / JU-0T JU-T / JU-T / JU-T 5 5/ JU-0T JU-T / JU-T /
7 7 Flared Tube SAE J5 JUE SAE J5 Union Elbow JUE-T 5/ JUE-T / JUE-T / 7/ JUE-5T 5/ / JUE-T 0 9/ -..9 JUE-T / JUE-0T JUE-T / JUE-T / JUE-T 5 5/ JUE-0T JUE-T / JUE-T /
8 7 Flared Tube SAE J5 JUT SAE J5 Union Tee JUT-T 5/ JUT-T / JUT-T / 7/ JUT-5T 5/ / JUT-T 0 9/ -..9 JUT-T / JUT-0T JUT-T / JUT-T / JUT-T 5 5/ JUT-0T JUT-T / JUT-T /
9 7 Flared Tube SAE J5 JUC SAE J5 Union Cross JUC-T 5/ JUC-T / JUC-T / 7/ JUC-5T 5/ / JUC-T 0 9/ -..9 JUC-T / JUC-0T JUC-T / JUC-T / JUC-T 5 5/ JUC-0T JUC-T / JUC-T /
10 7 Flared Tube SAE J5 JBU SAE J5 Bulkead Union JBU-T 5/ -... JBU-T / JBU-T / 7/ JBU-5T 5/ / JBU-T 0 9/ JBU-T / JBU-0T JBU-T / JBU-T / JBU-T 5 5/ JBU-0T JBU-T / JBU-T /
11 7 Flared Tube SAE J5 JBUW Weld Bulkead Union JBUW-T 5/ JBUW-T / JBUW-T / 7/ JBUW-5T 5/ / JBUW-T 0 9/ JBUW-T / JBUW-0T JBUW-T / JBUW-T / JBUW-T 5 5/ JBUW-0T JBUW-T / JBUW-T /
12 7 Flared Tube SAE J5 JFBU Female Bulkead Union t (NPT) JFBUT-0N 5/ JFBUT-0N / JFBUT-0N / 7/ JFBU5T-0N 5/ / JFBUT-0N 0 9/ - / JFBUT-0N / JFBU0T-0N - / JFBUT-0N / JFBUT-0N / JFBUT-0N 5 5/ JFBU0T-0N JFBUT-N / - / JFBUT-N /
13 7 Flared Tube SAE J5 JBUE SAE J5 Bulkead Union Elbow JBUE-T 5/ JBUE-T / JBUE-T / 7/ JBUE-5T 5/ / JBUE-T 0 9/ JBUE-T / JBUE-0T JBUE-T / JBUE-T / JBUE-T 5 5/ JBUE-0T JBUE-T / JBUE-T /
14 7 Flared Tube SAE J5 JMC SAE J5 Male Connector t (NPT) JMCT-0N 5/ JMCT-0N / JMCT-0N / 7/ JMC5T-0N 5/ / JMCT-0N 0 9/ - / JMCT-0N / JMC0T-0N - /....0 JMCT-0N / JMCT-0N / JMCT-0N 5 5/ JMC0T-0N JMCT-N / - / JMCT-N /
15 7 Flared Tube SAE J5 JME SAE J5 Male Elbow No. t (NPT) JMET-0N 5/ JMET-0N / JMET-0N / 7/ JME5T-0N 5/ / JMET-0N 0 9/ - / JMECT-0N / JME0T-0N - / JMET-0N / JMET-0N / JMET-0N 5 5/ JME0T-0N JMET-N / - / JMET-N /
16 7 Flared Tube SAE J5 JMRT SAE J5 Male Run Tee t (NPT) JMRTT-0N 5/ JMRTT-0N / JMRTT-0N / 7/ JMRT5T-0N 5/ / JMRTT-0N 0 9/ - / JMRTT-0N / JMRT0T-0N - / JMRTT-0N / JMRTT-0N / JMRTT-0N 5 5/ JMRT0T-0N JMRTT-N / - / JMRTT-N /
17 7 Flared Tube SAE J5 JMBT SAE J5 Male Branc Tee t (NPT) JMBTT-0N 5/ JMBTT-0N / JMBTT-0N / 7/ JMBT5T-0N 5/ / JMBTT-0N 0 9/ - / JMBTT-0N / JMBT0T-0N - / JMBTT-0N / JMBTT-0N / JMBTT-0N 5 5/ JMBT0T-0N JMBTT-N / - / JMBTT-N /
18 7 Flared Tube SAE J5 JME SAE J5 5 Male Elbow t (NPT) JMET-0N 5/ JMET-0N / JMET-0N / 7/ JME5T-0N 5/ / JMET-0N 0 9/ - / JMET-0N / JME0T-0N - / JMET-0N / JMET-0N / JMET-0N 5 5/ JME0T-0N JMET-N / - / JMET-N /
19 7 Flared Tube SAE J5 JFC SAE J5 Female Connector t (NPT) JFCT-0N 5/ -... JFCT-0N / JFCT-0N / 7/ JFC5T-0N 5/ / JFCT-0N 0 9/ - / JFCT-0N / JFC0T-0N - /....0 JFCT-0N / JFCT-0N / JFCT-0N 5 5/ JFC0T-0N JFCT-N / - / JFCT-N /
20 7 Flared Tube SAE J5 JFE SAE J5 FeMale Elbow t (NPT) JFET-0N 5/ JFET-0N / JFET-0N / 7/ JFE5T-0N 5/ / JFET-0N 0 9/ - / JFET-0N / JFE0T-0N - / JFET-0N / JFET-0N / JFET-0N 5 5/ JFE0T-0N JFET-N / - / JFET-N /
21 7 Flared Tube SAE J5 JFRT SAE J5 Female Run Tee t (NPT) JFRTT-0N 5/ JFRTT-0N / JFRTT-0N / 7/ JFRT5T-0N 5/ / JFRTT-0N 0 9/ - / JFRTT-0N / JFRT0T-0N - / JFRTT-0N / JFRTT-0N / JFRTT-0N 5 5/ JFRT0T-0N JFRTT-N / - / JFRTT-N /
22 7 Flared Tube SAE J5 JFBT SAE J5 Female Branc Tee t (NPT) JFBTT-0N 5/ JFBTT-0N / JFBTT-0N / 7/ JFBT5T-0N 5/ / JFBTT-0N 0 9/ - / JFBTT-0N / JFBT0T-0N - / JFBTT-0N / JFBTT-0N / JFBTT-0N 5 5/ JFBT0T-0N JFBTT-N / - / JFBTT-N /
23 7 Flared Tube SAE J5 JOMC-G O-Ring Seal Male Connector(PF) t (PF) JOMCT-0G 5/ JOMCT-0G / JOMCT-0G / 7/ JOMC5T-0G 5/ / JOMCT-0G 0 9/ - / JOMCT-0G / JOMC0T-0G - / JOMCT-0G / JOMCT-0G / JOMCT-0G 5 5/ JOMC0T-0G JOMCT-G / - / JOMCT-G /
24 7 Flared Tube SAE J5 JOMC-U SAE J5 O-Ring Seal Male Connector (UNF/UN) t (UNF/UN) JOMCT-0U 5/ - 5/ JOMCT-0U / JOMCT-0U / 7/ - 0 7/ JOMC5T-05U 5/ / - 0 / JOMCT-0U 0 9/ - 9/ JOMCT-0U / JOMC0T-0U JOMCT-U / - / JOMCT-U / - / JOMCT-U 5 5/ - 5/ JOMC0T-0U JOMCT-U / JOMCT-U / - /
25 7 Flared Tube SAE J5 JOME SAE J5 O-Ring Seal Male Elbow t (UNF/UN) JOMET-0U 5/ - 5/ JOMET-0U / JOMET-0U / 7/ - 0 7/ JOME5T-05U 5/ / - 0 / JOMET-0U 0 9/ - 9/ JOMET-0U / JOME0T-0U JOMET-U / - / JOMET-U / - / JOMET-U 5 5/ - 5/ JOME0T-0U JOMET-U / JOMET-U / - /
26 7 Flared Tube SAE J5 JOME SAE J5 O-Ring Seal 5 Male Elbow t (UNF/UN) JOMET-0U 5/ - 5/ JOMET-0U / JOMET-0U / 7/ - 0 7/ JOME5T-05U 5/ / - 0 / JOMET-0U 0 9/ - 9/ JOMET-0U / JOME0T-0U JOMET-U / - / JOMET-U / - / JOMET-U 5 5/ - 5/ JOME0T-0U JOMET-U / JOMET-U / - /
27 7 Flared Tube SAE J5 JOBT SAE J5 O-Ring Seal Branc Tee t (UNF/UN) I I JOBTT-0U 5/ - 5/ JOBTT-0U / JOBTT-0U / 7/ - 0 7/ JOBT5T-05U 5/ / - 0 / JOBTT-0U 0 9/ - 9/ JOBTT-0U / JOBT0T-0U JOBTT-U / - / JOBTT-U / - / JOBTT-U 5 5/ - 5/ JOBT0T-0U JOBTT-U / JOBTT-U / - /
28 7 Flared Tube SAE J5 JORT SAE J5 O-Ring Seal Run Tee t (UNF/UN) I I JORTT-0U 5/ - 5/ JORTT-0U / JORTT-0U / 7/ - 0 7/ JORT5T-05U 5/ / - 0 / JORTT-0U 0 9/ - 9/ JORTT-0U / JORT0T-0U JORTT-U / - / JORTT-U / - / JORTT-U 5 5/ - 5/ JORT0T-0U JORTT-U / JORTT-U / - /
29 7 Flared Tube SAE J5 JMSC Male Swivel Connector t (NPT) JMSCT-0N 5/ JMSCT-0N / JMSCT-0N / 7/ JMSC5T-0N 5/ / JMSCT-0N 0 9/ - / JMSCT-0N / JMSC0T-0N - / JMSCT-0N / JMSCT-0N / JMSCT-0N 5 5/ JMSC0T-0N JMSCT-N / - / JMSCT-N /
30 7 Flared Tube SAE J5 JOMSC O-Ring Seal Male Swivel Connector t (UNF/UN) JOMSCT-0U 5/ - 5/ JOMSCT-0U / JOMSCT-0U / 7/ - 0 7/ JOMSC5T-05U 5/ / - 0 / JOMSCT-0U 0 9/ - 9/ JOMSCT-0U / JOMSC0T-0U JOMSCT-U / - / JOMSCT-U / - / JOMSCT-U 5 5/ - 5/ JOMSC0T-0U JOMSCT-U / JOMSCT-U / - /
31 7 Flared Tube SAE J5 JFSC Female Swivel Connector t (NPT) JFSCT-0N 5/ -... JFSCT-0N / JFSCT-0N / 7/ JFSC5T-0N 5/ / JFSCT-0N 0 9/ - / JFSCT-0N / JFSC0T-0N - / JFSCT-0N / JFSCT-0N / JFSCT-0N 5 5/ JFSC0T-0N JFSCT-N / - / JFSCT-N /
32 7 Flared Tube SAE J5 JSE SAE J5 Swivel Elbow JSE-T 5/ JSE-T / JSE-T / 7/ JSE-5T 5/ / JSE-T 0 9/ JSE-T / JSE-0T JSE-T / JSE-T / JSE-T 5 5/ JSE-0T JSE-T / JSE-T /
33 7 Flared Tube SAE J5 JSRT SAE J5 Swivel Run Tee JSRT-T 5/ JSRT-T / JSRT-T / 7/ JSRT-5T 5/ / JSRT-T 0 9/ JSRT-T / JSRT-0T JSRT-T / JSRT-T / JSRT-T 5 5/ JSRT-0T JSRT-T / JSRT-T /
34 7 Flared Tube SAE J5 JSBT SAE J5 Swivel Branc Tee JSBT-T 5/ JSBT-T / JSBT-T / 7/ JSBT-5T 5/ / JSBT-T 0 9/ JSBT-T / JSBT-0T JSBT-T / JSBT-T / JSBT-T 5 5/ JSBT-0T JSBT-T / JSBT-T /
35 7 Flared Tube SAE J5 JP SAE J5 Plug JC SAE J5 Tube Cap JP-T 5/ - 7. JC-T 5/ -.7 JP-T / -.5 JC-T / - 5. JP-T / 7/ JC-T / 7/ JP-5T 5/ / JC-5T 5/ / JP-T 0 9/ JC-T 0 9/ -. JP-T / JC-T / -. JP-0T JC-0T -. JP-T / -..5 JC-T / JP-T / - JC-T / - 7. JP-T 5 5/ -. JC-T 5 5/ -.. JP-0T -.9. JC-0T -.0 JP-T / -.9 JC-T / JP-T / JC-T / -. 5
36 7 Flared Tube SAE J5 JRA SAE J5 Reducer Adapter JN SAE J5 Bulkead ock Nut Reducing JRAT-T / 7/ JN-T 5/ - 5. JRAT-T / / 7/ JN-T / JRAT-T / 9/ - 5. JN-T / 7/ JRA0T-T / 7/ JN-5T 5/ / JRA0T-T 9/ -. JN-T 0 9/ JRAT-T / 7/ JN-T / JRAT-T 9/ JN-0T JRAT-T / JN-T / - 0. JRAT-T / JN-T / JRA0T-T / JN-T 5 5/ JRA0T-T 5/ JN-0T JRAT-0T / -.9 JN-T / JN-T / - 0.
37 7 Flared Tube SAE J5 JN SAE J5 Nut JS SAE J5 Sleeve JN-T 5/ -.0 JS-T JS-MT -. - JN-T / JS-T JS-MT / -. - JN-T / 7/ JS-T JS-MT / JN-5T 5/ / JS-5T JS-5MT 5/.. JN-T 0 9/ -.5 JS-T JS-MT JN-T / -. JS-T JS-MT /.. JN-0T -.9 JS-0T JS-0MT.. JN-T / -. JS-T JS-MT JN-T / JS-T JS-MT JN-T 5 5/ -..7 JS-T JS-MT JN-0T -. JS-0T JS-0MT.. JN-T / JS-T JS-MT /.. JN-T / -.5 JS-T JS-MT Metric Sleeves are used wit standard nuts & bodies 7
38 7 Flared Tube SAE J5 TUBE FITTINGS (COMPRESSION TYPE) BITE TYPE TUBE FITTINGS (IN5) BITE TYPE TUBE FITTINGS (JIS B5) 7 FARE TUBE FITTINGS (SAE J5) FORGE FITTINGS INSTRUMENT TREA FITTINGS O-RING FACE SEA FITTINGS PUS-ON OSE FITTINGS YRAUIC FANGE (SAE J5 &ISO) KEY OPERATION BA VAVES KEY OPERATION NEEE VAVES BA VAVE SBV0 SERIES BA VAVE SBV0 SERIES BA VAVE SBV0 SERIES IG PRESSURE BA VAVES CRYOGENIC NEEE VAVES YRAUIC BA VAVES CECK VAVES
39 7 Flared Tube SAE J5 IG PRESSURE CECK VAVES REIFE VAVES INTEGRA BONNET NEEE VAVES UNION BONNET NEEE VAVES IG PRESSURE NEEE VAVES PUG VAVES MICRON IN-INE FITERS SWING-OUT BA VAVES TRUNNION BA VAVES TOGGE VAVES BEE & PURGE VAVES GAUGE ROOT VAVES MANIFO VAVES OUBE BOCK&BEE VAVES QUICK CONNECTORS WATER REGUATORS FEXIBE META OSES VACUUM CAMPS 9
40 Valve Series Key Operation Ball Valves Key Operation Needle Valves Ball Valves Integral Bonnet Needle Valves Union Bonnet Needle Valves Ceck Valves ig Pressure Ceck Valves ig Pressure Needle Valves Plug Valves Manifold Valves Vacuum Clamps Water Regulators Flexible oses ouble Block & Bleed Valves Swing-Out Ball Valves Toggle Valves Bleed & Purge Valves Quick Connectors ig Pressure Ball Valves ydraulic Ball Valves Trunnion Ball Valves Rising Plug Valves Relief Valves Cryogenic Needle Valves Cryogenic Ball Valves Micron in-ine Filters Gauge Root Valves ydraulic Flange and Components Fitting Series Tube Fittings (Compression Type) Instrument Tread Fittings Forged Fittings Bite Type Tube Fittings (IN5) Bite Type Tube Fittings (JIS B5) 7 Flared Tube Fittings (SAE J5) O-Ring Face Seal Fittings ose Connectors & Pus-On ose Fittings Electric MCP(Molded Case Power istributor) -, Bukjeong-dong Yangsan-si Gyeongsangnam-do Korea Tel Fax superlok@superlok.com 경상남도양산시북정동 - 전화 : 팩스 : superlok@superlok.com BMT CFT- (0.0.0)
3-PIECE TUBE ASSEMBLY
3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the
Instrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
Forged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
Instrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
M Tube Fitting Design Standards & Codes
25 M Tube Fitting esign Standards & Codes Make-up 1 1/4 turns advance NUT by 1.25 pitces from finger-tigt position. n 20 TPI, 1.25 pitces travel 1/16 in. (1.5875 mm) make-up distance for Gaugeability M
Quick Connectors DQ, DQM, and DF Series
Q, QM, and F Catalog No. QF-5 January 2012 No tools required to couple and uncouple. Bi-directional flow design. Versatile options of bot-end sutoff (V), single-end sutoff (SV), and bot end open (F ).
Acquired the Nippon Kaiji Kyokai Certificate for Approval Mechanical Joint.
Certification ASME (American Society of Mechanical Engineers) N Stamp ABS (American Bureau of Shipping) Lloyd (Lloyd s Register of Shipping) DNV (Det Norske Verita/Norwegian Assoc.)
Local solutions for individual customers worldwide STAUFF TWIN FERRULE TUBE CONNECTORS.
ocal solutions for iniviual customers worlwie SUFF WN FERRUE UE CONNECORS www.stauff.co.uk 1 well establise prouct in major inustries an applications e Stauff SUPEROK range alreay as many approvals an
INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.
INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
Profile & History. Certification 1988 ~ ~ ~ ~
Profile & History 1988 ~ 2003 2004 ~ 2006 2007 ~ 2008 2009 ~ Established GyeongPoong Machinery Co. Changed the Company name to BMT Co., Ltd Designated as a Clean Company by Ministry of Labor Introduced
NEW. BERMAD Irrigation 100 Series - High Performance Valves. Water Control Solutions
NE BERMAD Irrigation ig Performance Valves ater Control Solutions 100 Series Yflow ig Performance Plastic ydraulic Control Valves Features and Benefits Durable industrial grade valve design and construction
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
An Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
Introduction. Function of DIN TypeTube Fittings. Design and Construction. SUPERLOK DIN Type Tube Fitting. The SUPERLOK DIN Type Body :
Introduction UPEROK DIN ype Fitting e UPEROK DIN type fitting is a flareless metric fitting tat consists of a body, a compression ring (ferrule) and a nut, On assembly, two cutting edges of te compression
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Crossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
C-Lube Linear Roller Way Super MX Linear Roller Way Super X
-Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified
Z Tube O.D. Slze. Min
S Fittgs kok S Straigt Og Seal Fittgs are of positionable feature and provide connection tube to straigt tread boss. Furter tis as an advantage of elimatg weldg and brazg process wen used as bulkead fittg
BERMAD Irrigation. Technical Specifications. WW-700 & 800 Series Metric. 800 Metric
Tecnical Specifications -700 & 0 Series SI 700 Metric SI 0 Metric Available Sizes & Patterns DN - DN 0 - Y Pattern DN - DN 4 - Angle DN 600 - DN 0 - Globe Connection Standard Flanged: ISO 7005-2 (ISO,
Technical features. Types of combined bearings
OMBINE BEARINGS Tecnical features Types of combine bearings Naella combine neele bearings type RAX an erivatives are esigne to support simultaneously bot a raial an an axial loa. Tey comprise a neele trust
NSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
MANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
OVER 16,500 PRODUCTS.
OVER 16,500 PRODUCTS www.essentracomponents.com WELCOME TO ESSENTRA LOCATED IN 33 COUNTRIES We are global manufacturers and distributors of vital component parts for undreds of markets and tousands of
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
INSTRUMENTATION BALL VALVES VB3 Series
INSTRUMENTATION BALL VALVES VB3 Series www.korokusa.com Kor-Lok USA eatures Directiona ande Pressure rating wit standard PTE seats 3000psig (206bar) ony for te vaves wit orifice 4.8 2500psig (172bar) for
Axial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
THE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
SAMSUN MAKÝNA SANAYÝ. ISO 9001 Certification. Product Certification
Contents Samsun Makina Sanayi 4 SMS Resilient Seat Gate Valves Properties 5 Resilient Seat Gate Valves Dimensions 6 Resilient Seat Gate Valves Specifications 7 Resilient Seat Gate Valves Torque Values
Compression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications
PRODUCT SELECTION GUIDE Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications...Make the leak free connections with Sealexcel products at competitive
KFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
FFM04 Industrial grade high accuracy turbine flow meter
FFM0 Industrial grade ig accuracy turbine flow meter New Higly Sensitive Metal SUS Ceramics Core Bearings ow loss power & pressure Power Microflow amount Precision Measurement SUS ( VS / VH ) mm ow 0 bar
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
Floating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
C-Lube Linear Roller Way Super MX Linear Roller Way Super X
-ube inear Roller ay uper inear Roller ay uper X 14 Aquamarine endplate for identification of -ube inear ay Identifi cation number and specifi cation Te specification of -ube inear Roller ay uper is identified
product catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
THE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
KFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
COMPRESSION TUBE FITTINGS CONNECTORS
COMPRESSION UBE FIINGS CONNECORS 1/16 HROUGH 2 2 MM HROUGH 50 MM LE-LOK HO OES I ORK? LE-LOK UBE FIINGS ESCRIPION CONNECORS he LE-LOK tube fitting is a mechanism used both to seal and to grip tubing. he
High Temperature Masking
Hig Temperature Masking Silicone Caps an Plugs (+300ºC) 92-96 Flexible PVC Caps an Plugs (+220ºC) 97-98 Paper Caps an Plugs (+205ºC) 99 EPM an TPR Caps an Plugs (+180ºC) 100-105 Masking Tapes, Hooks an
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
Tool Reference Guide. Swagelok Minnesota North Dakota Appleton offers a complete line of tools and equipment to rent or purchase.
Tool Reference Guide Swagelok Minnesota North Dakota Appleton offers a complete line of tools and equipment to rent or purchase. This allows for ease and accessibility while in the work place. Whether
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
Pyxis & Corvus. Launch brochure
Pyxis & Corvus Launc brocure Roblon Pyxis and Roblon Corvus downligts acieve uncompromising ligt quality tat is based on exceptional LED ligting tecnology. Pyxis and Corvus downligts are ideal for use
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
Electric Pallet Truck with Lithium Battery
Electric Pallet Truck wit Litium Battery : CBD12W 48V large capacity maintenance-free litium battery, long working time around 6ours. Te carging time only needs 3 ours. 10 seconds replacement of te battery(two
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
Micro24 TM Hose & Tube System
Micro24 TM Hose & Tube System THE COMPACT HOSE & TUBE SYSTEM IDEAL FOR HOSING APPLICATIONS IN SMALLER AND PROGRESSIVE DIES WHERE SPACE IS LIMITED. METAL FORMING SOLUTIONS TM Micro24 System The Compact
A LH Series. LH Series. 2. Ball slide shape
Series -5-1.1 Series are also available in randam matcing. (Special ig-carbon steel products for 15 to 45) 2. all slide sape all slide Model Sape/installation metod ype (Upper row, Rating: ower row, all
Optimized Radius of Roller Large End Face in Tapered Roller Bearings
NTN TECHNICAL REVIEW No.77 29 Tecnical Paper Optimized Radius of Roller Large End Face in Tapered Roller Bearings Hiroki FUJIWARA Takasi TSUJIMOTO Kazuto YAMAUCHI Tapered roller bearings can support eavy
TUBE & PIPE SECTION D
TUBE & PIPE SECTION pirtekusa.com Page General Technical ata for Tube and Pipe... 2 Flow Rate & Temperature Recommendations... 3 Schedule 40, 80, 160 Pipe ata... 3 Tube ata Standard Sizes... 4 TUBE AN
STAUFF. Klemmringverschraubungen Twin Ferrule Compression Fittings. Local solutions for individual customers worldwide
STAUFF Klemmringverschraubungen Twin Ferrule Compression Fittings Local solutions for iniviual customers worlwie INDEX UNION SU Union SRU Reucing Union SBHRU Bulkhea Reucing Union SBHU Bulkhea Union CONNECTORS
supertorc Actuators and Controls
supertorc Actuators and Controls Contents supertorc Actuators 4 5 6 7 7 7 8 8 8 Basic actuator Module system Scotc-Yoke principle Manual actuator Electric actuator Cylinder actuator Sub-sea actuator Spring
product catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
Instrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
VFS 90 (ORFS) Flare tube fitting
according to SAE J1453 and ISO 8434-3 For various tube wall thicknesses in metric or inch dimensions Quick, easy and safe installation Radial installation of the tube Captive/soft seal High nominal pressures
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 HROUGH 2 -INCH, 2 MM HROUGH 50 MM-MERIC LE-LOK UBE FIINGS ESCRIPION he HM-LE GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications since its establishment
STAUFF. Test. Local solutions for individual customers worldwide
STAUFF Test ocal solutions for individual customers worldwide Walter Stauffenberg mbh & Co. K P.O.Box 745 58777 Werdol ermany Im Erenfeld 4 5879 Werdol ermany Telepone: + 49 2392 96-0 Facsimile: + 49 2392
Shinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
DURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
Non-Valved Unisex Coupling
SM64019 October 2010 Aerospace Group Conveyance Systems Division Applicable additional manuals: None Carter Brand Ground Fueling Equipment Maintenance Manual Non-Valved Unisex Coupling Model 64019 Model
TURBOVAC i Turbomolecular pumps
TURBOVAC i Turbomolecular pumps A giant leap in vacuum performance! It as never been so easy to improve your processes until now. TURBOVAC (T) 350-450 i will allow you to optimize pump down times and consistently
INSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
MANN+HUMMEL Filters for Liquids
MANN+HUMML Filters for Liquids MANN+HUMML Industrial Filters Te MANN+HUMML Group is an international company wit its eadquarters in Ludwigsburg, Germany. Te group employs approx. 9500 people worldwide
4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
DOUBLE FERRULE FITTINGS FLUID CONTROLS PRIVATE LIMITED
DOUBLE FERRULE FITTINGS FLUID CONTROLS PRIVATE LIMITED INTRODUCTION Fluid Controls Double Ferrule Compression Tube Fittings provide leak proof torque free seals at all tubing connections. They eliminate
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
A VH Series. VH Series. AComparison with NSK standard products
133-5-1.2 1. eatures (1) ig-performance end seals ig-performance end seals wit a multi-lip structure prevent te entry of various foreign matters. (2) lubrication unit (standard) Outstanding lubrication
BALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
A SH Series. SH Series. 2. Ball slide shape
S Series -5-1.2 S Series 1. eatures (1) ower noise and gentler tone Incorporating a retaining piece and optimizing te circulation pat enables steel ball circulation stability and te prevention of ball
13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 XL200 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE CALIPER 13-8
XL200 13. HYDRAULIC BRAKE SERVICE INFORMATION 13-1 TROUBLESHOOTING 13-2 BRAKE FLUID REPLACEMENT/ BLEEDING 13-3 BRAKE PAD/DISC 13-4 MASTER CYLINDER 13-6 BRAKE 13-8 SERVICE INFORMATION GENERAL t A contaminated
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
Regenerative Shock Absorber in the Vehicle Suspension System
Regenerative Sock Absorber in te Veicle Suspension System Kireev A.V. 1,a, Kozemyaka N.M. 1,b, Burdugov A.S. 1,c and Klimov A.V. 2,d 1 Scientific and Tecnical Center PRIVOD-N, Novocerkassk City, Krivoslykova
Quicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
ISO 9001 Certified Fitting and Valve Manufacturer
ASM Accredited Nuclear & ISO900 Quality System ISO 900 Certified Fitting and Valve Manufacturer Catalog Number 0- January, 00 HYRAULIC SWAGING UNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over Certificates
Angle Type Needle Valves - Miniature Series
Angle Type Needle Valves - Miniature Series Mod. 020-021 - 022 Applications: Pressure instruments isolation (gauges, switches, transmitters, etc.) Connections: Threaded to ANSI-ASME B1.20.1, ISO 228 -
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
A LH Series. LH Series A162. (2) Ball slide shape
Series -5-1.3 Series (2) all slide sape all slide Model Sape/installation metod ig-load type ype Super-ig-load type 1 1 (1) eatures 1. ig self-aligning capability (rolling direction) Same as te D combination
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
Evaluation of Turnability of Tracked Vehicle
JARQ 3, 249-253 1996) Evaluation of Turnability of Tracked Veicle Nobutaka ITO Department of Bioproduction and Macinery, Faculty of Bioresources, Mie University Tsu, Mie, 514 Japan) Abstract Rice combine
March 30, 2017 H-1 2 & 3 HANDLE TUB & SHOWER FITTINGS. SSC No. Manuf No. Finish Price Each 20A 0230 M A Polished Chrome $ 13.
March 30, 2017-1 2 & 3 ANDLE TUB & SOWER FITTINGS COLONY SOFT TWO ANDLE BAT & SOWER FITTINGS LEVER ANDLE. CAST BRASS BODY ON 8" CENTERS. 1 /4 TURN WASERLESS CERAMIC DISC VALVE CARTRIDGES. 1 /2" NPT FEMALE
C-Lube Linear Way MH Linear Way H MH LWH
-Lube Linear ay M Linear ay ML -Lube Maintenance ree Series -Lube Linear ay M M long term maintenance free supported! Te aquamarine end plate is te symbol of maintenance free. Identification umber and
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends