VFS 90 (ORFS) Flare tube fitting
|
|
|
- Nancy Sherman
- 5 years ago
- Views:
Transcription
1 according to SAE J1453 and ISO For various tube wall thicknesses in metric or inch dimensions Quick, easy and safe installation Radial installation of the tube Captive/soft seal High nominal pressures VOSS zinc-nickel corrosion protection VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 1 FMV-Schawohl X
2 Fitting body according to SAE J1453 or ISO , respectively Stiffener sleeve, optionally also as soldering sleeve Components Flared tube end Nut according to SAE J1453 or ISO , respectively VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 2 FMV-Schawohl X
3 Fitting body Nut Stiffener sleeve System design Clamped captive soft seal Flared tube end VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 3 FMV-Schawohl X
4 Radial installation of the tube without having to loosen the opposite support Guided installation Suitable for pressures up to 9,100 PSI or 630 bar, respectively Suitable for tubes with metric and inch dimensions Allows virtually unlimited repeat installations (this only requires checking and, if necessary, replacing the captive soft seal) Best possible corrosion resistance thanks to VOSS zinc-nickel corrosion protection Technical specifications According to SAE J1453 and ISO VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 4 FMV-Schawohl X
5 Use of various tube wall thicknesses with only one type of fitting body Suitable for tubes with metric and inch dimensions Broad range of products available Wide choice of sealing types and threads Also suitable for directly connecting hoses Stiffener sleeve is also available as soldering sleeve Adaptable to other systems Flexibility VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 5 FMV-Schawohl X
6 VOSS zinc-nickel surface protection Development of red rust in salt spray test according to ASTM B117 and ISO 9227 only after more than 720 hours Extremely high corrosion resistance, even after handling and installation! Much higher corrosion resistance than a surface protection with a zinc base coat White rust is only observed in the form of a slight gray discoloration, no voluminous white corrosion decomposition products (zinc oxide): "efflorescence" Corrosion protection Verifiably better corrosion resistance than A3C Has been the base coat of choice (zinc-nickel) for many years, now is standard in the European automobile industry Chromium(VI) - free VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 6 FMV-Schawohl X
7 Short installation and removal times thanks to radial installation Long product life thanks to VOSS zinc-nickel corrosion protection Universally applicable for various tube dimensions Protection cap on the threads to protect them against damage More cost-efficient than soldered joints Economic efficiency VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 7 FMV-Schawohl X
8 Easy to install and remove Nominal pressures up to 9100 PSI and 630 bar respectively, with a safety factor of 4 O-ring fixation in the adaptor Protection cap on the threads to protect them against damage No "sweating thanks to captive soft seal Excess tightening is virtually impossible Best protection of components against corrosion thanks to VOSS zinc-nickel finish Safety VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 8 FMV-Schawohl X
9 Male stud unions Connecting unions Bulkhead unions Adjustable male studs with swivel nut Adjustable couplings with swivel nut Adapters Product range Adjustable male stud with lock nut Thread types: BSPP, UNF/UN, NPTF, metric Component parts Female stud and gauge connectors Reducing couplings Sealing types: UN/UNF, NPTF, Profile ring PEFLEX, O-ring, O-ring with retaining ring VOSS Fluid GmbH VFS90 (ORFS) Bördelverschraubungen Page 9 FMV-Schawohl X
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Cutting Ring Couplings
Cutting Ring Couplings The soft seal connection with 4-fold benefits 3 Experience plus ideas Oil Solutions PO Box 653 Castlemaine 3450 Phone 0421 336 009 Fax 03 9012 3332 sales@oilsolutions.com.au www.oilsolutions.com.au
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Technical Description Screw-to-connect type of coupling for difficult applications. construction in steel, working up to 450 bar.
Screw-toconnect 3/8" up to 1" Technical Description Screw-to-connect type of coupling for difficult applications. Rugged, modular construction in steel, working up to 450 bar. dvantages Self locking threads
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Assembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
CXL2 Injectors & Manifolds
CXL2 Injectors & Manifolds Premium Single Line Grease Systems General Designed for use in single line high pressure automatic grease systems, CXL2 Injectors deliver precise volumes of lubricant at predetermined
Test Point Plugs Section
Test Point Plugs S e c t i o n 11 Test Point Plugs (European Interchangeable) These Test Point Plugs are designed to be complementary to and interchangeable with similar equipment from other manufacturers
SKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
Hydraulic Valves. Experience plus ideas
Hydraulic Valves Experience plus ideas Contents Type/Page Product information Hydraulic valves Function description Non-return valves Pg. 271 Non-return valves Pg. 272-273 RHD RHDI RHV RHZ Function description
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
Hydraulic Flanges & Components & Dual Seal Flanges
Hydraulic Flanges & Components & Dual Seal Flanges L Hydraulic Flanges and Components Flange Clamps FCS Flange Clamps Split FCC Flange Clamp Captive FHS3 Code 61 Flange Clamps Metric FHS6 Code 62 Flange
Impact Sockets & Accessories
HEAVY BOLTING APPLICATIONS Impact Sockets & Accessories A complete solution for every tool application Ph: 1300 WALTAN (1300 925 826) 6 POINT SOCKETS 12 POINT SOCKETS IN-HEX DRIVERS ADAPTORS UNIVERSAL
Industrial Tube Fittings and Adapters
Industrial Tube Fittings and Catalog 4300-JD October 2010 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
2500 PSI STANDARD FEATURES 2500 PSI CYLINDERS
2500 PSI STANDARD FEATURES Intended Use: Double acting applications Rated Pressure: 2500 PSI Material: High Tensile SAE C1045, ground and polished hard chrome plated Barrel Material: High tensile SAE C1026/St52.3
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
CERTIFIED & TESTED TO ISO-22241
DEF HOSE TUBE Specially Formulated Polyurethane COVER Specially Formulated TPR APPLICATIONS DEF, AUS 32, oil, diesel FEATURES CERTIFIED & TESTED TO ISO-22241 Clean Certified DEF Assemblies Available. Lighter
Tube Connectors. Assembly Tools and Devices. Product Overview STAUFF Connect
Tube Connectors Assembly Tools and Devices Product Overview STAUFF Connect STAUFF Connect The STAUFF Connect product group is closely aligned with the market requirements and contains an extensive range
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
PYPLOK System It s the weldless, threadless way to join pipe/tube
The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and
KOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
WORM GEAR 421F... Information. Radio and control accessories. Operating systems. for Venetian blinds. Operating systems. for rolling shutters
Information WORM GEAR 421F... Gerhard Geiger GmbH & Co. KG 1W12 en 41 Subject to technical modifications System components Electric motors for the Information Electric motors Mechanical drives : and :
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
Messing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS PF2000 Series Fixed Displacement s Also refer to "Checkball Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
Build the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
PRODUCT OVERVIEW. Hydraulic Couplings and Valves
PRODUCT OVERVIEW Hydraulic Couplings and Valves www.holmbury.com www.holmbury.com HQ & H Series Flat face made to the ISO 16028 Standard H90 Series 90 Flat face made to the ISO 16028 Standard Body Sizes
SUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
ISO Interchange SERIES
ISO 18 Interchange SERIES Series ISO 18 Interchange Featuring Snap-tite quality with superior pressure and flow characteristics over the competition. Flush Face/Dry Break design facilitates easy cleaning
Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
GS-37 FLARE FLANGE SYSTEM
FLARING AND INSTALLATION INSTRUCTIONS GS-37 FLARE FLANGE SYSTEM REVISION FEBRUARY 2016 GS-37 GS-37 FLARE FLANGE SYSTEM Flaring and Installation Instructions Table of contents Introduction 3 GS-37 Connection
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
Komatsu Style Adapters J
Komatsu Style Adapters J PNMKA Plug FNMKA Cap MKA Union XMKA 37 Flare / XMKA6 37 Flare / 30 Swivel J2 Komatsu Style Adapters The 30 flare, metric thread interface, also known as the Komatsu style flare
PFM6 Digital Portable Hydraulic Tester
PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal
40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
CARBON STEEL PIPE FITTING SAE J1453 STAINLESS STEEL PIPE FITTING SAE J1453
CATALOGUE 1 CARBON STEEL PIPE FITTING This type of fitting has been used since many years in every kind of industrial application, to the full satisfaction of users through out the world. The casting
Parker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
QUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
Eye Wash Unit S0201 for Scrub Sinks
Eye Wash Kit S0201 for Scrub Sinks The Eye Wash Unit provides flushing fluid to both eyes simultaneously. The flushing streams rise to approximately equal heights on both sides. The two spray heads have
FLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
Copper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
TURIN. Mole Antonelliana, built in A monument and symbol of the modern city of Turin (Julia Augusta Taurinorum), founded by the Romans in 28 BC.
TURIN Mole Antonelliana, built in 1863 A monument and symbol of the modern city of Turin (Julia Augusta Taurinorum), founded by the Romans in 28 BC. 3 FOR A CONSTANT IMPROVEMENT The staff concerned full
74 Series ISO Interchange
Series ISO 8 Interchange Featuring Snap-tite quality with superior pressure and flow characteristics over the competition. Flush Face/Dry Break design facilitates easy cleaning prior to connection High
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
Komatsu Style Adapters
Komatsu tyle Adapters The Fitting Authority 4300 Catalog Komatsu tyle Adapters PNMKA Plug FNMKA Cap MKA Union XMKA 37 Flare / XMKA6 37 Flare / 30 wivel K2 4300 Catalog Komatsu tyle Adapters Introduction
MULTI-COUPLING PLATES
MULTI-COUPLING PLATES MP Series Hydraulic Multi-Coupling Plate Overview - Front end loaders - Harvesting equipment - Construction machinery - Refrigeration - Snow removal equipment - Energy sector - Any
B R E N N A N c a t a l o g
B R E N N A N c a t a l o g $ 15 00 Dear Valued Customer: We are pleased to present our hydraulic tube fitting and adapter catalog. Since 1953, Brennan Industries, Inc. has been supplying hydraulic tube
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
QUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
Quick Couplings. Pioneer offers the widest range of quick couplings on the market, and has a product for nearly every agricultural application.
Pioneer has been The Farmer s Choice for more than 60 years, and it is the world leader in quick coupling products for the agricultural industry. These products are manufactured in state-of-the-art manufacturing
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
SECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
Catalogue 7 STAUFF Test
est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Introduction Introduction 4-11 est Couplings 12-53 est daptors 54-59 B est Hoses and Connectors 60-71 C echnical ppendix 72-77 D
Push-in fittings NPQM
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
2SVA / ES-4VA Cutting Ring Couplings
/ Cutting Ring Couplings The entire VOSS programme in accordance with DIN EN ISO 8434-1 in stainless steel 1.4571 4 Experience plus ideas Oil Solutions PO Box 653 Castlemaine 3450 Phone 0421 336 009 Fax
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
Product Data Sheet. Part Number: Gen 3 Frame LH Fill. Product Technical Specifications
Part Number: 116883 Part Description: Fuel Storage Module (FSM) Gen 3 Frame LH Fill Product Technical Specifications General Specifications Designed Location... Frame Rail Mount (FRM) Gasoline Gallon Equivalancy