Build the future, prepare for LNG
|
|
|
- Abel Cameron George
- 5 years ago
- Views:
Transcription
1 LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner:
2 LNG Vent Connections Male Quick Disconnect Vent Bulkhead Tube conn. Part Number: Male Quick Disconnect Vent Bulkhead 3/8 Npt Tube conn. Ø.375 tube size ( Swagelok tube fitting equivalent) Male Quick Disconnect Vent End conn. Part Number: Male Quick Disconnect Vent Metric Part Number: Male Quick Disconnect Vent Metric in US, M20 x 1.5 Bulkhead Male Quick Disconnect Vent 3/8 NPT End conn. Male Socket Weld Male Quick Disconnect Vent Bulkhead Part Number: Male Quick Disconnect Vent Bulkhead 3/8 Npt End conn. Part Number: Male with 3/8 pipe socket weld Repair Kit Part Number: Repair Kit for 11170, 12680, Page 2 Page 3
3 Black plastic Cap cover Part Number: Black plastic Cap cover and chain assembly for Male QDV vent Male Fuelling Receptacle 37 Female Quick Disconnect Vent, 90 Part Number: Female Quick Disconnect Vent, 10 GPM/Vent, 90deg. 5/8 tube size, 45deg SAE fitting end (CGA 440 ref) Part Number: Male Fuelling Receptacle 37 SAE flare fitting with holding plate, posilock anti-rotation system and aluminum anodized clear cap cover Blue Aluminum Cover Cap Part Number: Aluminum anodized blue Cap cover and lanyard assembly for Male QDV vent Male Quick Disconnect Vent Poppets-leakdown Part Number: Male Quick Disconnect Vent Poppets-leakdown Female Quick Disconnect Vent Part Number: Female Quick Disconnect Vent, 10 GPM/Vent, Short Straight Handle (Cryogenic Swivel Part No required) 5/8 tube size, 45deg SAE fitting end (CGA 440 ref) Long Female Quick Disconnect Vent Part Number: Female Quick Disconnect Vent, 10 GPM/Vent, Long Straight Handle (Cryogenic Swivel Part No required) 5/8 tube size, 45deg SAE fitting end (CGA 440 ref) Vent Thread Ring Tool Part Number: T-1948 Vent Thread Ring Tool for Quick Disconnect Vent Female Page 4 Page 5
4 Repair Kit for Quick Disconnect Vent Female Part Number: LNG Fill Connections Repair Kit for Quick Disconnect Vent Female containing #14535 Poppet Assembly, #11173 Seal and Seal Assembly Seal Kit for Quick Disconnect Vent Female Part Number: Seal Kit for Quick Disconnect Vent Female Poppet Assembly for Quick Disconnect Vent Female Part Number: Poppet Assembly for Quick Disconnect Vent Female Body Seal for Quick Disconnect Vent Male/Female Part Number: Body Seal for Quick Disconnect Vent Male/Female Male Fuelling Receptacle Part Number: Male Fuelling Receptacle with inlet 3/4 OD tube with double-ferrule fitting like Swagelok and SSP Duolok Male Fuelling Receptacle Part Number: Male Fuelling Receptacle with inlet 3/4 OD tube with double-ferrule fitting like Swagelok and SSP Duolok Male Fuelling Receptacle with inlet 3/4 NPTF Part Number: Male Fuelling Receptacle with inlet 3/4 NPTF Page 6 Page 7
5 Male Fuelling Receptacle with 90 inlet Part Number: Male Fuelling Receptacle with 90 inlet for 3/4 OD tube with doubleferrule fitting like Swagelok and SSP Duolok Male Fuelling Receptacle 37 SAE flare fitting Part Number: Male Fuelling Receptacle 37 SAE flare fitting Male Fuelling Receptacle M30x1.5 Part Number: Male Fuelling Receptacle M30x1.5 thread metric tube fitting Male Fuelling Receptacle M30x2.0 THD Part Number: Male Fuelling Receptacle M30x2.0 THD thread metric tube fitting Aluminum Cap for Male Fuelling Receptacle Part Number: Aluminum Cap for Male Fuelling Receptacle Dock, Fuelling Nozzle Receptacle Part Number: Dock, Fuelling Nozzle Receptacle Dock, Fuelling Nozzle Receptacle closed-end Part Number: Dock, Fuelling Nozzle Receptacle Repair Kit for Male Fuelling Receptacle Part Number: T-3003 Part Number: Repair Kit for Male Fuelling Receptacle Seal for Male Fuelling Receptacle (Obsolete) Seal for Male Fuelling Receptacle Seal for Male Fuelling Receptacle (OBSOLETE - USE NEW P/N 14508) Part Number: Seal for Male Fuelling Receptacle Page 8 Page 9
6 LNG Vent / Fill Cryogenic Hoses 1/2 ID Bulk Hose - venting line 72 (1,80 m) Stainless Steel connections Part Number: CHS /2 ID Bulk Hose - venting line 72 (1,80m) Stainless Steel connections 5/8 45 SAE venting line 72 (1,80 m) Part Number: CHB /2 ID Bulk Hose - venting line 72 (1,80m) Brass connections 5/8 45 SAE venting line 96 (2,40 m) Part Number: CHS /2 ID Bulk Hose - venting line 96 (2,40m) Stainless Steel connections 5/8 45 SAE venting line 120 (3 m) Part Number: CHS /2 ID Bulk Hose - venting line 120 (3m) Stainless Steel connections 5/8 45 SAE venting line 144 (3,60 m) Part Number: CHS /2 ID Bulk Hose - venting line 144 (3,60m) Stainless Steel connections 5/8 45 SAE venting line 96 (2,40 m) venting line 120 (3 m) venting line 144 (3,60 m) 1 ID Bulk Hose liquid line 72 (1,80 m) Part Number: Part Number: CHB /2 ID Bulk Hose - venting line 96 (2,40m) Brass connections 5/8 45 SAE Part Number: CHB /2 ID Bulk Hose - venting line 120 (3m) Brass connections 5/8 45 SAE Part Number: CHB /2 ID Bulk Hose - venting line 144 (3,60m) Brass connections 5/8 45 SAE liquid line 72 (1,80m) Stainless Steel connections SAE J514, 37 Flare JIC venting line 156 (3,90 m) 1/2 ID Bulk Hose - venting line 180 (4,50m) liquid line 120 (3 m) liquid line 144 (3,60 m) liquid line 180 (4,50 m) Part Number: CHB Part Number: CHB Part Number: Part Number: Part Number: /2 ID Bulk Hose - venting line 156 (3,90m) Brass connections 5/8 45 SAE 1/2 ID Buk Hose - venting line 180 (4,50m) Brass connections 5/8 45 SAE liquid line 120 (3m) Stainless Steel connections SAE J514, 37 Flare JIC liquid line 144 (3,60m) Stainless Steel connections liquid line 180 (4,50m) Stainless Steel connections Page 10 Page 11
7 liquid line 120 (3 m) Stainless Steel Swivel 45 male SAE fitting for 5/8 OD Tube, 5/8 SAE 45 female Part Number: Part Number: WARNING liquid line 120 (3m) Stainless Steel connections WITH double armor (reinforced ends) SAE J514, 37 Flare JIC when using the swivel in an installation with any kind of side-loading there is a known risk of leakage Part Number: 9551-RK Repair kit for Swivel liquid line 144 (3,60 m) Stainless Steel liquid line 156 (3,90 m) Stainless Steel liquid line 180 (4,50 m) Stainless Steel Hose Adaptor 1 JIC Female x 5/8 SAE Male Hose Adapter 1 JIC Female x 5/8 SAE Male Part Number: Part Number: liquid line 144 (3,60m) Stainless Steel connections WITH double armor (reinforced ends) SAE J514, 37 Flare JIC Part Number: liquid line 156 (3,90m) Stainless Steel connections WITH double armor (reinforced ends) SAE J514, 37 Flare JIC Part Number: liquid line 180 (4,50m) Stainless Steel connections WITH double armor (reinforced ends) SAE J514, 37 Flare JIC (Flare tubing adapter 1 37 SAE FEMALE to 5/8 45 SAE MALE) Copper Cone Seal for Bulk Hose connections liquid line 240 (6 m) Stainless Steel Part Number: liquid line 240 (6m) Stainless Steel connections WITH double armor (reinforced ends) SAE J514, 37 Flare JIC Part Number: Copper Cone Seal for 1/2 Bulk Hose connections Brass Adapter Part Number: B-290 Brass Adapter, 1 male x 1/2 female (the use of 2 pcs, allow the installation of a 1 LNG liquide hose in the LNG venting line which commonly have 1/2 connections) Part Number: Copper Cone Seal for 1 Bulk Hose connections Page 12 Page 13
8 LNG Vent / Fill Breakaway Breakaway Flow, Fill side Breakaway Part Number: Fill Breakaway standard (10.50 length) Flow, 22.5 angled Dispenser Connection Fitting, Ø 1 Tube size M NPT Hose Connection Fitting, UN-2A Thread for Ø 1 Tube size, 37 SAE fitting end. Does NOT include 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Breakaway, Vent for 1/2 ID Hose Part Number: Vent Breakaway (6 length) for 1/2 ID Hose. Hose Connection Fitting UN-2A Thread for 5/8 SAE 45º Male Fitting End (JIC) Dispenser Connection Fitting MNPT RE. Includes 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Breakaway Flow, Fill side Breakaway Part Number: Fill Breakaway short (10.50 length) Flow, 22.5 angled. Dispenser Connection Fitting, Ø1 Tube size M NPT Hose Connection Fitting, M36 x 2 THD. Does NOT include 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Part Number: Fill Breakaway standard (10.50 length) Flow, 22.5 angled. Dispenser Connection Fitting, Ø 1 Tube size M NPT Hose Connection Fitting, UN-2A Thread for Ø 1 Tube size, 37 SAE fitting end. Includes 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Part Number: Fill Breakaway short (10.50 length) Flow, 22.5 angled. Dispenser Connection Fitting, Ø1 Tube size M NPT Hose Connection Fitting, M36 x 2 THD. Includes 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Part Number: Breakaway Flow, Fill side Breakaway Fill Breakaway short (7.25 length) Flow, 22.5 angled. Dispenser Connection Fitting, Ø 1 Tube size M NPT Hose Connection Fitting, UN-2A Thread for Ø 1 Tube size, 37 SAE fitting end Does NOT include 1/4 MNPT blankedoff air pressure fitting for pneumatic pressure switch Part Number: Fill Breakaway standard (10.50 length) Flow, Straight NOT angled. Dispenser Connection Fitting, Ø 1 Tube size M NPT Hose Connection Fitting, UN-2A Thread for Ø 1 Tube size, 37 SAE fitting end Does NOT include 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Part Number: Part Number: Part Number: Breakaway Flow, Fill side Breakaway Fill Breakaway short (7.25 length) Flow, 22.5 angled. Dispenser Connection Fitting, Ø1 Tube size M NPT Hose Connection Fitting, M36 x 2 THD. Does NOT include 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Fill Breakaway short (7.25 length) Flow. Dispenser Connection Fitting, Ø1 Tube size M NPT Hose Connection Fitting, UN-2A Thread for Ø 1 Tube size, 37 SAE fitting end Includes 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Fill Breakaway short (7.25 length) Flow. Dispenser Connection Fitting, Ø1 Tube size M NPT Hose Connection Fitting, M36 x 2 THD Includes 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Part Number: Fill Breakaway standard (10.50 length) Flow, Straight NOT angled. Dispenser Connection Fitting, Ø 1 Tube size M NPT Hose Connection Fitting, UN-2A Thread for Ø 1 Tube size, 37 SAE fitting end Includes 1/4 MNPT blanked-off air pressure fitting for pneumatic pressure switch Page 14 Page 15
9 Fuelling Nozzle Sleeve Assembly for CryoMac3 Part Number: Sleeve Assembly for CryoMac3 (sleeve, nose piece, 16 balls, 6 guide pins, and a rubber band) Seat & Seal Assembly for CryoMac3 SAFE REGO CryoMac3 nozzle SAFETY feature is patented, certified and recognized in the market as a major failsafe advantage for the operator SAFETY. Part Number: Seat & Seal Assembly for CryoMac3 Fuelling Nozzle CryoMac3-50M CryoMac3 Interface Seal replacement Part Number: CryoMac3 Interface Seal replacement (to ensure a correct seal replacement use tool kit p/n 14590) Part Number: CryoMac3 Interface Seal replacement OBSOLETE VERSION (please use latest release p/n 14591) CryoMac3 Seal Repair Tool Kit CERTIFIED according to ISO approved product as specified by ISO Natural gas fuelling stations LNG stations for fuelling vehicles Part Number: CryoMac3 Seal Repair Tool Kit Part Number: CryoMac3-50M JIC Male SAE 37 Flare Fitting for 1 tube Stand. Handle ISO Road Vehicles certified Flow Capacity Part Number: CryoMac3-50M-S JIC Male SAE 37 Flare Fitting for 1 tube - Short Handle ISO Road Vehicles certified Flow Capacity Page 16 Page 17
10 Poppet Assembly for CryoMac3 Part Number: Poppet Assembly for CryoMac3 Engineered Controls International, LLC Burlington, North Carolina United States of America Tool for poppet removal for CryoMac3 Part Number: T-2961 Tool for poppet removal for CryoMac3 Kiwa Nederland B.V. hereby declares that the CryoMac3 LNG nozzle, Complies with the requirements of ISO12617:2016 Road vehicles Liquefied natural gas (LNG) refuelling connector - 3,1 MPa connector Issued by: Paul Dijkhof, Unit Manager Automotive, Kiwa Nederland B.V. Kiwa Nederland B.V. Wilmersdorf 50 P.O. Box AC APELDOORN The Netherlands Phone Fax Number ISO-01 Ext.:00 Issued June 2nd, 2016 This declaration is issued on June 2nd, 2016 and is valid for the above mentioned product until the product is modified. All details of the modifications can be found in the report Page 1-1 Page 18 Page 19
11 Maximum safety for LNG fuel technology Your LNG partner: REGO GmbH is ISO 9001 certified REGO GmbH - Distribution Center Europe Industriestrasse 9, Gladenbach, Germany Phone +49 (0) , Fax info@rego-europe.de REGO Trademarks Macro Technologies Superior Products
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
High-Flow. Type TK16 H 2. WEH - We Engineer Hightech WEH H 2. Fuelling Nozzle with Data Interface DATA SHEET
D-2014/03/00016-0-3 Date: 05/2014 Type TK16 H 2 High-Flow WEH H 2 Fuelling Nozzle with Data Interface for buses and trucks at self-service fuelling stations WEH - We Engineer Hightech Type TK16 H 2 General
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
ENTIRE FUELING PROCESS IN & OUT IN 5 MINUTES*!
JC CARTER NOZZLES & ACCESSORIES FOR LNG nozzles product line_112502.indd 1 3/2/2011 8:43:24 AM ENTIRE FUELING PROCESS IN & OUT IN 5 MINUTES*! Using our patented Ice Breaker technology, the JC Carter LNG
2018 CNG Refueling High-Performance Components for Natural Gas Vehicles and Fueling Stations
2018 CNG Refueling High-Performance Components for Natural Gas Vehicles and Fueling Stations Fueling technology for natural gas Catalog 15 Date: 03/2018 WEH - We Engineer Hightech All rights reserved,
DatA sheet. D-2011/05/ Date: 02/2013. Type TK10 CNG. CNG Fuelling Nozzle. for cars FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type CNG Fuelling Nozzle for cars FUTURE. TECHNOLOGY. TODAY. Type Fuelling nozzle for cars General Description Ball valve Sliding sleeve 1 Hand grip TK4 CNG
Refuelling High-Performance Components for Hydrogen Vehicles and Fuelling Stations
Catalogue 50 H 2 Refuelling High-Performance Components for Hydrogen Vehicles and Fuelling Stations Fuelling technology for hydrogen Date: 05/2014 WEH - We Engineer Hightech All rights reserved, WEH GmbH
THE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-110R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
CryoMac 3 50 GPM LNG Nozzle Operation and Maintenance Manual
Macro Technologies A RegO Brand CryoMac 3 50 GPM LNG Nozzle Operation and Maintenance Manual Part Numbers: CryoMac3-50M and CryoMac3-50M-S SAFETY INSTRUCTIONS For your safety and improved service life
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Data sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
A World Class Tradition of Quality
Snap-tite offers a full line of NGV1 fueling products. A World Class Tradition of Quality 2 Snap-tite Quality, Safety, Ingenuity F ounded over 65 years ago, Snap-tite has grown into a corporation producing
Product Catalog: Fluid Transfer Systems
Product Catalog: Fluid Transfer Systems Table Of Contents Product Page Fuel Nozzles 1 1/2.... 1 & 2 Fuel Nozzles 2....3 Fuel Receivers....4 Non-Pressure Fuel System....5 Internal Line Non-Pressure Fueling
Data sheet. D-2011/05/ Date: 02/2013. Type TN1 CNG. Receptacle. for refuelling of cars with CNG FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TN1 CNG Receptacle for refuelling of cars with CNG FUTURE. TECHNOLOGY. TODAY. General Description Features Compatible with fuelling nozzles acc. to NGV1
Data sheet. D-2011/05/ Date: 02/2013. Type TSA5 CNG. Breakaway Coupling. for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type Breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Receptacle insert Eccentric actuator coupling body Features Re-usable
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
THE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitively discontinued
DATA SHEET. D-2011/05/ Date: 05/11. Type TSA6 CNG. Inline breakaway coupling. for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
DATA SHEET D-2011/05/00160-0-3 Date: 05/11 Type TSA6 CNG Inline breakaway coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. DatA SHEET General Description Breakaway receptacle Eccentric
Eclipse Encapsulated Air Compressor Service Parts List (Models ECL-100 and ECL-300)
Eclipse Encapsulated Air Compressor Service Parts List (Models ECL-100 and ECL-300) Document Number Issue Date 03/13/14 Rev. Date 11/8/18 Compressor Air Circuit Tubing Oil Cooler and Oil Filter Electrical
82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
Data sheet. D-2011/05/ Date: 07/2013. Type TK4 CNG. CNG Fuelling Nozzle. for cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK4 CNG CNG Fuelling Nozzle for cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with receptacles acc.
Data sheet. D-2011/05/ Date: 02/2013. Type TSA6 CNG. Inline breakaway Coupling. for bus and truck fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA6 CNG Inline breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Receptacle insert Eccentric actuator
u Rubber Dust Cap Standard protective dust caps are supplied with all receptacles.
L SERIES OPW L Series NGV-certified fueling receptacles are designed for use on medium storage natural gas vehicles, including automobiles, light trucks, shuttle buses and vans. Features u High-Flow Capacity
Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
THE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitively discontinued
Certificate of Type Approval (RQS)
Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube
Data sheet. D-2011/05/ Date: 07/2013. Type TK1 CNG. CNG Fuelling Nozzle. for time filling of cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK1 CNG CNG Fuelling Nozzle for time filling of cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with
Schroeder Check Test Point System
Section 1: Introduction Schroeder Check test points provide a fast easy and safe way to test pressures up to 10,000 psi (680 bar) in hydraulic systems under operation. They are available in both 1620 (M16x20)
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
70 MPa. Type TK17 H 2. WEH - We Engineer Hightech WEH H 2. Fuelling Nozzle with exchangeable data interface (ENR) DATA SHEET
D-2014/10/00022-0-3 Date: 07/2015 Type TK17 H 2 70 MPa WEH H 2 Fuelling Nozzle with exchangeable data interface (ENR) for cars at self-service fuelling stations WEH - We Engineer Hightech General DESCRIPTION
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
SRG LPG Liquid Service/Offtake Valve Type /
SRG LPG Liquid Service/Offtake Valve Type 480-426 / 480-427 Inlet Connection Outlet Connection Width across flats ¾ NPT 1 ¼ NPT M26x1,814 36 mm 46 mm Product Description: The SRG type 480 liquid service
CNG Frame Mount FSM Parts Manual
CNG Frame Mount FSM Parts Manual Printed December 16, 2016 Rev C Preface Proper installation, service, and repair are important to the safety of the service technician and the safe, reliable operation
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
DATA SHEET. D-2011/05/ Date: 05/11. Type TSA1 CNG. Breakaway coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DATA SHEET D-2011/05/00160-0-3 Date: 05/11 Type Breakaway coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. Type Breakaway coupling for car fuelling stations DatA SHEET General Breakaway receptacle
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400)
Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400) Document Number Index: Issue Date 02/19/14 See Page Rev. Date 1/24/18 Clutch Compressor Air Circuit Tubing Component
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
Instrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
NGV refuelling connections Refuelling
NGV refuelling connections Refuelling Stäubli NGV refuelling connections Comprehensive range of NGV 1 compatible products for the refuelling of all kinds of Compressed Natural Gas vehicles in a safe environment
PRODUCT OVERVIEW. Hydraulic Couplings and Valves
PRODUCT OVERVIEW Hydraulic Couplings and Valves www.holmbury.com www.holmbury.com HQ & H Series Flat face made to the ISO 16028 Standard H90 Series 90 Flat face made to the ISO 16028 Standard Body Sizes
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
Locked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
EAGLE TUGS. Transit Pro Option. Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models
EAGLE TUGS Transit Pro Option Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models QA018 REV00 10.20.09 QA018 REV03 02.11.12 A-2 QA018 REV03 02.11.12
Instrumentation Products. KM Series I Metal Seated Ball Valve
Instrumentation Products KM Series I Metal Seated Ball Valve KM Series I Metal Seated Ball Valve Ball Valve meets toughest requirements Extreme operating conditions with temperatures up to 450 C and pressures
DatA sheet. D-2011/05/ Date: 02/2013. Type TSA2 CNG. Inline breakaway Coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA2 CNG Inline breakaway Coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. DATA sheet General Description Receptacle insert Eccentric actuator
SPARE PARTS CATALOG TC LD AP TD S LP IA SERIES BREWERS
SPARE PARTS CATALOG TC LD AP TD S LP IA SERIES BREWERS TABLE OF CONTENT Base Assemblies Pages 3-5 Cover Assemblies Pages 6-7 Tank Assemblies Pages 8-12 Micro Switch & Bracket Assemblies Page 13 Valve &
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K7 Revision No: 1 This is to certify: That the Safety Valve with type designation(s) Safety valves with bellow seal, Types: 06800, 06801, 06805, 06806
Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
BRASS HOSE BARBS G21B
BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
Control Valves/Meters Grease
Grease 740 WARNING Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726, 81795 Install as shown. Swivels Volume High-Pressure Swivels Model Description Thread Size 81728 Straight 1 /2" NPT(m) x
FC-S3 FC-5 FC-3 FC-TD FC-AP FC-LD FC-S
SPARE PARTS CATALOG FC-S3 FC-5 FC-3 FC-TD FC-AP FC-LD FC-S FC SERIES BREWERS FC-TS TABLE OF CONTENT Base Assemblies Pages 3-5 Cover Assemblies Pages 6-7 Tank Assemblies Pages 8-13 Fill Tube Assembly Page
Hand Beading Tool.12 Hand Tube Bender.13 EZ-Beading Tool.14 PTFE Tape & Paste...15 Pressure Test Kit.15 Aluminium Wrenches.16 Aluminium Vice Jaws.
Table of Contents Fabrication Parts Male Weld-on Adapters 2 Female Weld-on Adapters...2 Aluminium Weld Bends 3 Alloy Bends.... 3 Wiggins Weld-on Adapters..4 Wiggins Connectors.5 Cores..6 Radiator Necks..7
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Instrumentation Products. Mini Valves and Rupture Disc Holders
Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental
TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
Connection solutions for industrial applications Date: 07/2014
Catalogue 35 WEH Connectors Pressure-tight connections in seconds to threads, beads, tubes, etc. Connection solutions for industrial applications Date: 07/2014 WEH - We Engineer Hightech ll rights reserved,
Specialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
Virtual Pipeline FSM Parts Manual
Virtual Pipeline FSM Parts Manual Printed February 9, 2018 Rev A Preface Proper installation, service, and repair are important to the safety of the service technician and the safe, reliable operation
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K3 Revision No: 1 This is to certify: That the Check Valve with type designation(s) 05414, 05417, 05419, 05714, 05717, 05719 Issued to Herose GmbH Armaturen
JSG Industrial Systems
FLOMAX CATALOGUE JSG Industrial Systems quality industry solutions Lubrication Management Systems Material Dispensing Management Systems Hose & Cable Management Systems Diesel & Fluid Management Systems
HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1
HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated
M REV. D APRIL 2010 BMR-44 PARTS MANUAL
M-94-09 REV. D APRIL 00 BMR-44 PARTS MANUAL 9 Slauson Avenue. Santa Fe Springs, CA. 90670 (800) 7-46 MAXON Lift Corp. 009 LIFT CORP. CUSTOMER SERVICE: (56) 464-0099 (800) 7-46 FAX: (888) 77-77 9 Slauson
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION
Dynaswivel Air Connectors Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM Aluminum and Stainless Steel Construction Single Pivot Right angle single-pivot swivels 360 at one location.
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
Compressed Natural Gas Vehicle Fueling Products AGA/CGA NGV1 CERTIFIED. ISO-9001 Certi fied
Compressed Natural Gas Vehicle Fueling Products AGA/CGA NGV1 CERTIFIED ISO-9001 Certi fied Snap-tite offers a full line of NGV1 fueling products. A World Class Tradition of Quality 2 Snap-tite Quality,
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
PK-8270-X/PK-8370-X. Lines and Fittings Kit. Instructions. Introduction. How to Contact Fluke Calibration
Lines and Fittings Kit Introduction The Fluke PK-8270-NPT/BSP/SAE and PK-8370-100M Lines and Fittings Kits (the Product) are accessories that enable pressure controllers to be connected to pressure supplies
SECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)
Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection
Rhino SD/XD Depressurization Modules for Electric Changeover Controls
Instruction Sheet 1041-04 Rhino SD/XD Depressurization Modules for Electric Changeover Controls Description Rhino SD/XD depressurization modules relieve material pressure by flowing material under the
SKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
LOC-LINE the original modular coolant hose system
endless solutions, flexibility & performance COOLANT CONTROL LOC-LINE the original modular coolant hose system 8 1 9 8 6 13 4 The combinations and flexibility offered by Loc-Line shows that whatever your
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16924 First edition 2016-12-01 Natural gas fuelling stations LNG stations for fuelling vehicles Stations-service de gaz naturel Stations GNL pour le ravitaillement de véhicules
DATA SHEET. D-2014/03/ Date: 05/2014. Type TSA2 H 2. WEH Inline Breakaway Coupling. for car fuelling stations. WEH - We Engineer Hightech
D-2014/03/00016-0-3 Date: 05/2014 Type TSA2 H 2 WEH Inline Breakaway Coupling for car fuelling stations WEH - We Engineer Hightech General DESCRIPTION Receptacle insert Eccentric actuator coupling body
Automatic SingleLine Greasing System
Parts Manual Automatic SingleLine Greasing System D000144R04 YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying,
WATER CLEANING & BLASTING
WATER CLEANING & BLASTING PRODUCT CATALOGUE 2016/2017 WE KEEP IT RUNNING HOSES SUMMARY WATER CLEANING & BLASTING HOSE RANGE The water cleaning hose range is dedicated to hobby and professional water cleaning
AMAT 9500 Series & xr
Illustrated Parts Guide for AMAT 900 Series & xr Top View Top View A 9 0 900 Retainer, Front Plate, Molybdenum 000-990 900G Front Plate Half, Graphite 000-9 900 Liner, Side Plate, Tungsten 000-900 Filament
PRODUCT OVERVIEW. Hydraulic Couplers and Valves
PRODUCT OVERVIEW Hydraulic Couplers and Valves www.holmbury.com www.holmbury.com HQ Series Flat face made to the ISO 16028 H90 Series 90 Flat face made to the ISO 16028 Thread Sizes - 1/4-1 BSP, NPT, SAE,