Tool Reference Guide. Swagelok Minnesota North Dakota Appleton offers a complete line of tools and equipment to rent or purchase.
|
|
- Loraine Baldwin
- 5 years ago
- Views:
Transcription
1 Tool Reference Guide Swagelok Minnesota North Dakota Appleton offers a complete line of tools and equipment to rent or purchase. This allows for ease and accessibility while in the work place. Whether you need tube bending, cutting or swaging, consider what Swagelok has to offer. Equipment to Support Your Welding Needs power supply purge kits weld heads weld side plates Available for Rent or Purchase electric tube bender hydraulic and pneumatic swaging units tube facing tools orbital welding system & weld heads
2 Equipment for Rent Renting gives you the convenience of having precision tools readily available without having to purchase capital equipment. Whether your next job requires tube fitting installation, tube bending and cutting, or orbital welding, Swagelok has the equipment you need to get the job done right and on time. Manual Benchtop Bender Provides high-quality bends on fractional and metric tubing made from materials that can be used with Swagelok tube fittings. This easy-to-use tube bender reduces installation time and effort as well as the potential for wrinkling or other damage to the tubing during bending. To be used with 1/4-1 & 1/4 in. ( in. wall thickness) and 6-30 mm O.D. tubing ( mm wall thickness) Ordering Number: MS-BTB-M-E-FKIT Electric Tube Bender Provides high-quality bends on fractional and metric tubing made from materials that can be used with Swagelok tube fittings. This easy-to-use tube bender reduces installation time and effort as well as the potential for wrinkling or other damage to the tubing during bending. To be used with 1-2 in. O.D. tubing ( in. wall thickness) and mm O.D. tubing ( mm wall thickness) Ordering Number: MS-TBE-1-1-E-FKIT 2
3 Multihead Hydraulic Swaging Unit (MHSU) Preswages Swagelok ferrules onto tubing prior to assembly and provides Swagelok tube fitting connections that are 100 % gaugeable upon initial installation. Multihead hydraulic and air-actuated hydraulic swaging units place no initial strain on nut or fitting body threads or on body seal surfaces; in addition, it reduces assembly and installation time and operator error. To be used with 1/2-2 in. Swagelok fittings. Available in sizes 1/2-1 in. Ordering Number: MS-MHSU-U-E-FKIT-M Available in sizes 1-2 in. Ordering Number: MS-MHSU-O-E-FKIT-M Orbital Welder Power supply for reliable, consistent orbital gas tungsten arc welding; Up to 200 A peak output capability; Easy-to-use color touch screen in multiple languages; Integrated mass flow controller automatically controls OD shield gas flow; Weighs less than 50 lb; Compatible with Swagelok welding system weld heads. Weld heads and fixture blocks included. Should be rented with a purge panel. Ordering Number: Contact Customer Service Available for rent with Purge Panel & Bottle Regulator Options Equipment can be rented for daily, weekly and monthly usage, and are available for rent-to-own programs. Slightly-used equipment is also available for sale. For a full list of rental equipment and to learn more, info@minnesota.swagelok.com or call
4 Tools & Accessories for Purchase Swagelok offers a full range of tube fitting tools and accessories to help support your installation efforts. Tube Sawing Guide The tube sawing guide holds tubing to enable fast, accurate cutting with a hacksaw. The guide helps reduce tubing preparation time, thereby speeding system assembly. Ordering Number: MS-TSG-16 Tube Cutter The Swagelok tube cutter cuts stainless steel, soft copper and aluminum tubing from 3/16 to 1 in. and 4 to 25 mm outside diameter. Ordering Number: MS-TC-308 Replacement Wheel: MS-TCW-308 Cutting Tool for Hose and Soft Tubing Use to cut nylon, polyethylene, or rubber hose, as well as vinyl or PFA tubing to the desired length for field assembly. Ordering Number: MS-HC-SC-1A Replacement Blade: MS-HC-SC-1A-BLD Tube Deburring Tool After use of the tube cutter or tube sawing guide, Swagelok deburring tools deburr stainless steel, steel and hard alloy tube ends. Available in size 3/16-1-1/2 in. Ordering Number: MS-TDT-24 Hand Tube Bender Swagelok hand tube benders provide consistent, high-quality bends in tubing made from materials that can be used with Swagelok tube fittings. Available in Sizes 1/8-1/2 in. Ordering Number: MS-HTB- Cannot be used for SAF 2507 tubing over 1/4 in. or for mediumpressure tubing. Depth Marking Tool Swagelok depth marking tools help ensure that tubing is bottomed on the shoulder inside the Swagelok tube fitting body. Available in sizes 1/4-1 in. Ordering Number: MS-DMT- 4
5 Tools & Accessories for Purchase Preswaging Tool For Swagelok tube fitting installations in close quarters, the Swagelok preswaging tool is a convenient accessory. Available in female nut sizes 1/16-1 in. Available in male nut sizes 1/16-1/2 in. Ordering Number: MS-ST- PFA Groove Cutter PFA tubing MUST be grooved for use with PFA tube fittings. Use the Swagelok groove cutter tool. It is not necessary to groove tubing for use with metal fittings. Available in sizes 1/8-1/2 in. Ordering Number MS-GC- Tee Wrench The tee wrench provides positive backup support when installing Swagelok union tees and crosses. Available in sizes 1/4-1/2 in. Ordering Number: MS-TW- Ratchet Wrench The ratchet wrench is designed for use on Swagelok nuts for fitting installation. Available in sizes 1/8-1/2 in. Ordering Number MS-RW- Gap Inspection Gauge Swagelok gap inspection gauges provide assurance to the installer or inspector that the fitting has been sufficiently pulled up on initial installation, whether you are using a Swagelok multihead hydraulic swaging unit (MHSU), air-actuated hydraulic swaging unit (AHSU), or wrench tightening. All metal Swagelok tube fittings are gaugeable, with the exception of a few forged bodies in aluminum. Available in female nut sizes 1/16-1 in. Available in male nut sizes 1/16-1/2 in. Ordering Number MS-IG- Combination Seat and Pitch Gauge Seat and pitch gauges are conveniently combined into one tool. The seat gauge is used to determine end connection seat angles of 45, 37 and 30. The pitch gauge is used to identify the thread pitch. Note that a pitch gauge may be Unified (threads per inch), Whitworth (threads per inch) or Metric (millimeters per thread) as marked on the back of each gauge form. Ordering Number: MS-TIK-PG 5
6 Tools & Accessories for Purchase Vise Grip Our vise grip is especially designed with a knock-out feature for locking onto a hex-nut during assembly. Ordering Number: MS SWAK Thread sealant used to lubricate pipe threads to prevent damage due to galling and seizure during assembly Available in sizes.2 fl oz, 1.69 fl oz, 8.45 fl oz Ordering Number: MS-PTS- Snoop Liquid Leak Detector Non-toxic formula Composition: Deionized water and a surfactant Temperature rating: Can be used over a temperature range of 27 to 200 F ( 2 to 93 C). Available in sizes 2 fl oz, 8 fl oz and 1 gal Ordering Number: MS-SNOOP- Real Cool Snoop Liquid Leak Detector Composition: Deionized water, a surfactant and ethylene glycol to prevent freezing at low temperatures. Temperature rating: Can be used over a temperature range of 65 to 200 F ( 54 to 93 C). Available in sizes 8 fl oz and 1 gal Ordering Number: MS-RC-SNOOP- PTFE Tape Pipe Thread Sealant Material conforms to Commercial Item Description A-A Temperatures up to 450 F (232 C) Available in sizes 1/8 and up Ordering Number: MS-STR- 6
7 Tools & Accessories for Purchase Swagelok offers an expanding portfolio of products, assemblies and services to help you meet your fluid system needs. Fittings Tube Fittings & Tube Adapters Pipe Fittings Flange to Swagelok Adapters Vacuum Fittings Face Seal O-ring Fittings VCR Face Seal Fittings Weld Fittings Fine Thread Flare Tubing & Tube Accessories Stainless Steel Tubing Insulated Tubing Jacketed Tubing Special Alloys Support Systems Tools & Accessories Tube Benders Swaging Units Tube Cutting Deburring Facing Wrenches Welding Systems Leak Detectors Lubricants Sealants Measurement Devices Pressure Gauges Transducers Flowmeters & Sensors Thermometers Thermowells Regulators & Sensors Back Pressure Pressure Reducing Filters Coalescing / Particle High-Purity Particulate Valves Actuated Ball Bellows-Sealed Bleed and Purge Butterfly Check Diaphragm Manifolds Metering Needle Plug Relief Sample Stream Quick-Connects Full-Flow Instrumentation Miniature Hoses & Flexible Tubing Flexible Metal / PTFE Lined Hose Push-on Thermoplastic Hose Vacuum Tubing Vinyl Tubing Modular Solutions Welding Systems Plastic Products Sample Cylinders Services Training Audits Energy Managed Inventory CAD Drawing Engineered Solutions Assembly / Kitting 7
8 For more information, contact Swagelok: or Swagelok Minnesota 321 Lake Hazeltine Drive Chaska, MN PHONE TOLL FREE PHONE FAX Swagelok North Dakota 2000 University Drive, Unit #2 Bismarck, ND PHONE TOLL FREE PHONE FAX Swagelok Appleton 3240 East Pershing Street Appleton, WI PHONE TOLL FREE PHONE FAX Swagelok Minnesota, Swagelok North Dakota and Swagelok Appleton are authorized Swagelok sales and service centers. Warranty Information Swagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative. Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. All service marks and trademarks shown are owned and registered by Swagelok Company unless otherwise noted Swagelok Minnesota North Dakota Appleton, 2018 Swagelok Company. MN-TRG
Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
More informationTubing Tools and Accessories
www.swagelok.com Tubing Tools and Accessories Products Electric, bench top, and hand tube benders preparation tools support systems 2 Tubing Tools and Accessories Contents Benders Electric.... 2 Benders
More informationAn Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
More informationTubing Tools and Accessories
Tubing Tools and Accessories 1 www.swagelok.com Tubing Tools and Accessories Products Electric, bench top, and hand tube benders preparation tools 2 Tubing, Tubing Tools, and Welding System Contents ers
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More informationA Quick Look at Fluid System Solutions. swagelok.com
A Quick Look at Fluid System Solutions swagelok.com Who We Are Swagelok Company is a major developer and provider of fluid system solutions, including products, assemblies, and services for the research,
More informationTubing Cutter for 1/16" Stainless Steel Tubing
Delivery Tubing and ccessories 311 P000257 Tubing Cutter for 1/16" Stainless Steel Tubing 58692-U Low-cost tool cuts 1/16" stainless steel tubing without obstructing the bore. Easily cut 1/16" OD stainless
More informationMultihead Hydraulic Swaging Unit (MHSU) Setup and Operating Instructions
Multihead Hydraulic Swaging Unit (MHSU) Setup and Operating Instructions Up to 1 in./25 mm MHSU with base 1 in./25 mm and over MHSU with base (also for use with 5/8 and 3/4 in. SAF 2507 TM super duplex
More informationPFA Needle Valves. 4RP Series
PFA Needle Valves 4RP Series High-purity PFA material Pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C) 1/4, 3/8, and 1/2 in. Swagelok PFA tube fitting end connections www.swagelok.com
More informationTube Fitting Installation Instruction
Tube Fitting Installation Instruction TABLE OF CONTENTS I. Tubing Preparation 1. Tube pg 2-3 II. Tube Fitting Installation Instruction 1. Hy-Lok Tube Fitting Installation 2. Gap Inspection 3. Re-Assembly
More informationSpringless Diaphragm Valves (1.125 in.)
Springless Diaphragm Valves ( in.) DE Series 1 www.swagelok.com Springless Diaphragm Valves ( in.) For Modular Gas Systems DE Series in. C-seal and W-seal designs Available in two- and three-port configurations
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
Medium- and High- Fittings, Tubing, Valves, and ccessories 1 www.swagelok.com www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, CTB, and Sno-Trik Series Products
More informationEngineered for control from tap to transmitter
Engineered for control from tap to transmitter When it comes to Process Instrumentation, one company stands behind you to minimize risks and maximize productivity CONTINUE Going from tap to transmitter
More informationGaugeable Alloy 2507 Super Duplex Tube Fittings
Gaugeable lloy 2507 Super uplex Fittings 1 www.swagelok.com SUPR UPLX Gaugeable lloy 2507 Super uplex Fittings xcellent corrosion resistance in chloride-containing environments dvanced-geometry back ferrule
More informationCalibration and Switching Module. User s Manual. A Swagelok Pre-Engineered. Subsystem. Pre-engineered subsystems available in weeks, not months.
Calibration and Switching Module User s Manual A Swagelok Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Contents
More informationStream Selector System For Process Analyzer Applications
www.swagelok.com Selector System For Process Analyzer Applications SSV Series Provides double-block-and-bleed (DBB) operation in a single compact module Conventional NPT and ANSI/ISA 76.00.02 compatible
More informationSpecial Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
More informationBellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
More informationRecoverXLT Refrigerant Recovery Machine
RecoverXLT Refrigerant Recovery Machine Liquid and Vapor Recovery Set Up Liquid recovery is the fastest method, but not all equipment can handle the process Vapor recovery is slower than liquid recovery,
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, and Sno-Trik Series Products Rated up to 60 000 psig (4134 bar) nd connections up to 1 1/2 and 12 mm NC MR0175/ISO15156
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
More informationINSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
More informationWeir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s GSI Series Available in sizes 1/2 to 4 Available with a variety of end connections, including Kwik-Clamp and TS series sanitary clamp and tube butt weld 2 Weir-Style
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationProduct Selection Guide Myers & Co., Inc...a company committed to quality and integrity
Product Selection Guide Myers & Co., Inc....a company committed to quality and integrity SERVICING PENNSYLVANIA, OHIO, WEST VIRGINIA, MARYLAND Myers & Co., Inc. is a specialty distributor of instrumentation,
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
More informationSample Probe Module. Application Guide
Sample Probe Module Application Guide A Swagelok Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Wide range of
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationSpringless Diaphragm Valves
www.swagelok.com Springless Diaphragm Valves for igh Performance DP Series Suitable for ultrahigh-purity applications 316L VIM-VAR stainless steel body Low-pressure and high-pressure models VCR, tube butt
More informationUltrahigh-Purity Fluoropolymer Diaphragm Valves
www.swagelok.com Ultrahigh-Purity Fluoropolymer Diaphragm s DRP Series DuPont Teflon modified PTFE wetted parts and polypropylene actuator Meet SEMI Standard F57-0301 for ultrahigh-purity system components
More informationM Installation Guide. PRECISION Manifold Series. Introduction. A. Assemble Manifold Components
Page 1 Introduction The M-8200 Precision Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options with
More informationMedium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range
More informationBleed Valves and Purge Valves
Bleed Valves and Purge Valves 1 www.swagelok.com Bleed Valves and Purge Valves Bleed Valves Working pressures up to 10 000 psig (689 bar) Temperatures up to 850 F (454 C) 316 stainless steel, carbon steel,
More informationCheck Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass
More informationPFA Needle Valves. 4RP Series. High-purity PFA material. Working pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C)
Needle Valves 4RP Series 1 www.swagelok.com Needle Valves 4RP Series High-purity material Working pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C) 1/4, 3/8, and 1/2 in. Swagelok tube
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationINSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
More informationInstrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
More informationStream Selector System
www.swagelok.com Selector System For Process Analyzer Applications SSV Series Provides double-block-and-bleed (DBB) operation in a single compact module Conventional NPT and ANSI/ISA 76.00.02 compatible
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s BN Series Packless valves with all-metal seal to atmosphere Working pressures up to 500 psig (34.4 bar) Temperatures up to 200 F (93 C) 1/4 to 1/2 in. and 6 to
More informationDA Series Diaphragm Valve
DA Series Diaphragm Valve Service Instructions Pneumatically Actuated Valve Toggle Valve Valve Valve Valves are shown with tube butt weld ends. These instructions also apply to DA series valves with any
More informationMedium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationSSV Series. Assembly and Service Instructions. Contents. Tool Requirements
SSV Series Assembly and Service Instructions Contents Tool Requirements................. 1 Components and Hardware.......... 2 Port and Mounting Dimensions....... 3 General SSV Assembly.............. 4
More informationPlug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections
Plug Valves P4T and P6T Series 1 www.swagelok.com Plug Valves P4T and P6T Series Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections 1/8 through
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationHIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
More informationDL/DS Series Diaphragm Valve
DL/DS Series Diaphragm Valve Service Instructions DL Series (Lever Handle) Valve DS Series (Round Handle) Valve Valves are shown with tube butt weld ends. These instructions also apply to DL or DS series
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationMedium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range Bottom-loaded stem
More informationFluid Distribution Header
Fluid Distribution Header Application Guide A Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Versatile manifold
More informationVISUAL INDEX Equipment
U R Hand Tube Benders Ratchet Hand Tube Bender 1 Hand Tube Bender BAV06/12 Combined Tube Bending & Cutting Tool BV06/18, BV20/25 Tube Bending Tools Benders R4-R5 R4 R5 R6 R6 Bender Capacity Guides Exactol
More informationWeir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s DW Series Standard valve sizes 1/2 to 4 in. and minivalve sizes 1/4, 3/8, and Manual and pneumatic actuation Kwik-Clamp, TS series sanitary clamp, and tube butt
More informationHIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
More informationM-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components
Introduction The Pro Manifolds with Integrated adaptor are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options
More informationToggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationCheck Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationRising Plug Valves. 4P and 5P Series. Roddable, straight-through orifice for maximum flow. Working pressures up to 6000 psig (413 bar)
Rising Plug Valves4P and 5P Series 1 www.swagelok.com Rising Plug Valves 4P and 5P Series Roddable, straight-through orifice for maximum flow Working pressures up to 6000 psig (413 bar) Packing below the
More informationFilters. FW, F, and TF Series. Remove system particulate contaminants. Gas and liquid service. 1/8 to 1/2 in. and 3 to 12 mm end connections
s FW, F, and TF Series 1 www.swagelok.com s FW, F, and TF Series Remove system particulate contaminants Gas and liquid service 1/8 to 1/2 in. and 3 to 12 mm end connections Stainless steel and brass materials
More informationManifold Isolation Valves
300 N. Opdyke Rd. Introduction The Stainless Manifolds are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationHVAC/R. Australia New Zealand Edition
HVAC/R Australia New Zealand Edition 2011 2012 MANIFOLDS 481CKPC 400 Series Deluxe 2 Valve Brass Manifold 580CKPSC 680CKPSC 513CC Dual O ring Valve seals and Soft Seat Valves Precision engineered with
More informationSwagelok Alternative Fuel Service (AFS) Ball Valves
Swagelok Alternative Fuel Service () Ball Valves 461 Swagelok Alternative Fuel Service () Ball Valves For High-Pressure, High-Flow Applications Swagelok Ball Valves Working pressures up to 6000 psig (413
More informationInstrumentation. Visit Us Online WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS For Panel Fabricators
WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS. Moody Price LLC moodyprice@moodyprice.com 225-767-7755 225-763-6005 18320 Petroleum Drive, Baton Rouge, LA 70809 Visit Us Online 800-272-9832 Instrumentation
More informationVersion 2, November 2005
Version 2, November 2005 Table of Contents EPS-2000 EXEL Blue Power Supply 1 RDR-05 Rotor Driver 6 RTU-008 Rotor Unit for 1/8-1/5 Diameter 10 RTU-032 Rotor Unit for 1/2-2 Diameter 15 Slim Line Rotor Unit
More informationInstrumentation. Visit Us Online WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS For Electrical Supply
WE DO MORE THAN INDUSTRIAL. WE DELIVER TOTAL SOLUTIONS. Moody Price LLC moodyprice@moodyprice.com 225-767-7755 225-763-6005 18320 Petroleum Drive, Baton Rouge, LA 70809 Visit Us Online 800-272-9832 Instrumentation
More informationALL IN ONE. Imperial Tools now exclusively * offered by ATP. Five in One. Gültig bis zum 31. Januar 2007.
ALL IN ONE Imperial Tools now exclusively * offered by ATP Five in One Gültig bis zum 31. Januar 2007. IMPERIAL NOW EXCLUSIVE BY ATP * From now on, your Imperial Eastman tools and spare parts, with unique
More informationINSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
More informationStainless Steel Tubular Fittings Ultrahigh-Purity and Chemically Cleaned and Passivated
www.swagelok.com Stainless Steel ubular Fittings Ultrahigh-Purity and Chemically Cleaned and Passivated Sizes from 1/4 through 4 outside diameter Metric sizes available upon request 316L stainless steel
More informationCheck Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series 1 www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end
More informationToggle Valves. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
Toggle Valves OG,, and 92 1 www.swagelok.com Toggle Valves OG,, and 92 Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials 2 Needle and Metering
More informationGeneral Utility Service Needle Valves
General Utility Service Needle ValvesGU Series 1 www.swagelok.com General Utility Service Needle Valves GU Series Straight and angle patterns Stainless steel and carbon steel body material Pressures up
More informationSwagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
More informationTHE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
More informationStainless Steel Valves
www.swagelok.com Stainless Steel Valves For the Sanitar y Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationStream Selector System
Selector System Series 1 www.swagelok.com Selector System For Process Analyzer Applications Series Provides double-block-and-bleed (DBB) operation in a single compact module Conventional NPT and ANSI/ISA
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationIntegrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationIY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant
www.ihsungtech.co.kr IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant Lead the Innovation, Since 1993 Always Together, Always Success Company Profile
More informationTube Remover and Installer. and Installer Used for servicing Ford systems produced after Screen Extractor. Ford Aerostar Expansion
gauges A/C FLUSH KIT Easy-to-use system removes refrigerant oil, moisture contaminants from system components lines during retrofitting compressor replacement. Kit includes rubber-tipped flush gun, canister
More informationD iaphragm Valve s. for Atomic L aye r D e position. Atomic Layer Deposition (ALD) Diaphragm Valves.
www.swagelok.com D iaphragm Valve s for tomic L aye r D e position tomic Layer Deposition (LD) Diaphragm Valves Ultrahigh cycle life with high-speed actuation C v range from 0.27 to 0.62 Up to 392 F (200
More informationModular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
More informationGermany USA. China UAE FITOK Group.
USA Germany UAE China FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc. 13843 North Promenade Blvd.,
More informationShinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
More informationImperial Tools Distributor s Catalogue
PRODUCT GUIDE Imperial Tools Distributor s Catalogue Contents TUBE CUTTERS 1-4 TUBE BENDERS 5-8 FLARING & SWAGING 9-13 ACCESSORIES & WRENCHES 14-15 MANIFOLD 16-17 COUPLIERS 18 CHARGING & RECOVERY 19 INDEX
More informationSwing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
More informationGeneral Hand Tools (1 of 6)
General Hand Tools (1 of 6) Screwdrivers Straight-slot screwdrivers turn screws with straight slots. Phillips head screwdrivers turn screws with slots resembling a cross. General Hand Tools (2 of 6) Wrenches
More informationDixon Sanitary General Products. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationBall Valves. General Purpose and Special Application. 60 Series. 1/8 to 2 in. and 6 to 25 mm sizes
Ball s, General Purpose and Special Application60 1 www.swagelok.com Ball s General Purpose and Special Application 60 1/8 to 2 in. and 6 to 25 mm sizes Stainless steel, carbon steel, brass, and special
More informationPARTIAL PRODUCT LIST. Carbon Steel Tubes for Boiler & Heat Exchanger: Carbon Steel Pipe for Ordinary Piping: Carbon Steel Pipes for Pressure service:
Carbon Steel Pipe for Ordinary Piping: Carbon Steel Tubes for Boiler & Heat Exchanger: Carbon Steel Pipes for Pressure service: Carbon Steel Pipes for Stucture purposes: Arc welded carbon steel pipes for
More informationTHE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationDISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More information