FFM04 Industrial grade high accuracy turbine flow meter
|
|
- Gregory McCoy
- 5 years ago
- Views:
Transcription
1 FFM0 Industrial grade ig accuracy turbine flow meter New Higly Sensitive Metal SUS Ceramics Core Bearings ow loss power & pressure Power Microflow amount Precision Measurement SUS ( VS / VH ) mm ow 0 bar viscosity Anti-pollution ( RS / RH ) liquid & corrosion 0 mm 0/6 Sensor Witstand iameter Measuring Material Pressure Medium Introduction Fluid flowing troug FFM0 causes te rotor to revolve. As te rotor blade pass te pickoffs, electrical pulses are produced in wic frequency is proportional to te flow rate. Te revolutions per minute and te K-factor (number of pulses/gallon) make it possible to obtain te flow volume passing troug te unit. FFM0 series are used to measure medium or lower viscosity media, suc as water, ligt fuel, solvent, ydraulic oil, lubricating oil etc. Feature Bearable ig-pressure, ig-temperature and low-temperature ow pressure loss, low power consumption Fast response time Hig repeatability and accuracy Resistant to contamination and anti-corrosion Compact design and easy maintenance ow flow measurement Applications Petrocemical / Hydraulic / ubrication system Water treatment / Gas industry / aboratory equipment / Industrial boiler Test benc / Semiconductor integrated circuit Parmaceutical, Vacuum equipment efense science and tecnology Coal gas / Natural gas pipeline EYC FFM0 P/5
2 Specification Specifications Nominal iameter N...N0 Applicable Medium Medium or lower viscosity liquids Accuracy Better tan ±% of reading ±0.5% / ±0.% selectable Repeatability ±0.% of reading Pressure Rating MAX. 0bar Ambient C Medium C, C ( ig temperature type ) Materials Body / Rotor Support Turbine Saft Bearing Process Connection 0 stainless steel ( 6 stainless steel optional ) Stainless steel Tungsten carbide / ceramic Stainless steel ball bearing, Tungsten carbide/ceramic journal bearing BSPP female tread, NPT female tread Parameter Table Type Measuring Range / Min Max. Pressure N Process Connection Rating( bar ) ( mm ) (BSPP/NPT) Magnetic Pickoff Carrier frequency Pickoff FFM G/ or /"NPT FFM G/ or /" NPT FFM G/8 or /8" NPT FFM G/ or /" NPT FFM G/ or /" NPT FFM G/ or /" NPT FFM G or " NPT FFM G-/ or -/"NPT FFM G-/ or -/"NPT Filtration (micron) Journal Bearing Ball Bearing VS / VH : Magnetic pickoffs can sense a ferrous rotor and is ideal for use in all types of turbine flow meters. Options include cryogenic, ig temperature and explosion proof. Option : extremely low and ig temperature. RS / RH : Carrier frequency pickoffs offer low speed response, no drag, large sensing distance and can sense non-ferrous metals like aluminum or nonmagnetic stainless steel in addition to ferrous metal. Unlike magnetic pickoff, an carrier frequency pick off is not a passive device and requires coupling wit a signal conditioners/preamplifier. Tese devices produce a square wave output versus te analog sine wave of te magnetic pickoff. Bearings Tungsten carbide journal bearing - Applicable to low or non-lubricating media, narrow turndown ratio of te flow meter relative wit ball bearing. Stainless steel ball bearing - Applicable to lubricating media, wit low friction, lower limit for flow meter and wider turndown ratio. Ceramic journal bearing - Self-lubricating, applicable to non-lubricating media suc as liquid nitrogen, narrow turndown ratio of te flow meter relative wit ball bearing EYC FFM0 P/5
3 Product Accessories (optional) VS : Magnetic pickoffs wit pulse output amplifier RS : Carrier frequency pickoffs wit pulse Power Supply Current Consumption Reverse Polarity Proof Sort-circuit Proof Operating 0VC 8mA NPN OC output; NPN OC output+pull-up resistor -0 0 VH : Hig temperature magnetic pickoffs wit pulse RH : Hig temperature carrier frequency pickoffs wit pulse Operating Ambient VH C RH C C Ambient Electrical Connection Protection Class M x Plug IN650-A Plug(solenoid plug) M x Plug:IP67 Option : extremely low and ig temperature. Oter parameters please refer to te above Wiring - Pusle Output IN650-A Plus:IP65 Wiring PNP output NPN output 5 Cable Brown M x plug Black Blue Solenoid plug VA Magnetic pickoffs wit analog RA Carrier frequency pickoffs wit analog Power Supply Current Consumption 0VC Voltage analog output : 7 ma Current analog output : < ma VAH : Hig temperature magnetic pickoffs wit analog RAH : Hig temperature carrier frequency pickoffs wit analog Reverse Polarity Proof Sort-circuit Proof Operating Ambient Electrical Connection 0 0 V -wire ( 0 ) 0 ma M x Plug IN650-A Plug(solenoid plug) Operating VAH C RAH C Ambient C Option : extremely low and ig temperature. Oter parameters please refer to te above Protection Class MX Plug:IP67 IN650-A Plus:IP65 Wiring - Analog Output : -wiring /... 0mA Wiring...0mA ( -wire ) 5 Cable Brown M x plug Wite Blue Solenoid plug EYC FFM0 P/5
4 imension output Analog output M*.6 M* H H N Comparison table Nominal iameter (BSPP/NPT) Process Connection (BSPP/NPT) H for pulse output inc ( mm ) H foour tapnuatlog inc ( mm ) N G/ or /"NPT. (6).06 (7). ().5(85) 5.6 () N6 G/ or /" NPT. (6).06 (7). ().9 (86) 5. () N0 G/8 or /8" NPT.8 (6).8 (0). (6).6 (88) 5.8 () N N5 G/ or /" NPT G/ or /" NPT. (09). (09).6 ().6 ().85 (7).85 (7).5 (90).5 (90) 5.5 (6) 5.5 (6) N0 G/ or /" NPT 5.0 (7).8 (6).05 (5).66 (9) 5.7 (9) N5 N G or " NPT G-/ or -/"NPT 6.6 (6) 6.85 (7).97 (50).6 (60). (66).6 (66).7 (95).9 (99) 5.55 () 5.7(5) N0 G-/ or -/"NPT 7.76 (97).76 (70).0 (76).06 (0) 5.87 (9) EYC FFM0 P/5
5 Ordering Guide Item FFM0 GF Type BSPP female tread ( G tread ) NPT female tread NF Nominal diameter N 0 N6 06 N0 0 N N5 5 N0 0 N5 5 N N0 0 Bearings SUS ball bearing ( unavailable for N / N6 / N0 ) BB Tungsten carbide journal bearing TC Ceramic journal bearing CC Accuracy 0.% of reading A 0.5% of reading B % of reading C Measuring Range.5 / MIN.5 0 / MIN 0 0 / MIN 0 6 / MIN 6 00 / MIN 00 0 / MIN 0 70 / MIN / MIN 50 0 / MIN 0 Turndown ratio 0: ( Meter wit wide turndown ratio ( 0 : or 50 : ) 0: sould be uesed wit carrier 0: frequency pickoffs and stainless steel ball bearing. ) 0: Pickoffs type Output GF 0 TC C 0 VS H 50: 5 Magnetic pickoffs wit pulse Hig Temp. magnetic pickoffs wit pulse Magnetic pickoffs wit analog Hig Temp. magnetic pickoffs wit analog Carrier frequency pickoffs wit pulse Hig Temp. carrier frequency pickoffs wit pulse Carrier frequency pickoffs wit analog Hig Temp. carrier frequency pickoffs wit analog 0-0mA -0mA 0-5V V005-5V V05 0-0V V00 Electrical connection IN650-A H M x plug wit cable S Option Housing material SS6 SS6 VS VH VA VAH RS RH RA RAH A00 A0 EYC FFM0 P5/5 V808
NEXON FLOW F-1. Specifications. Applications. Parameter Table. Max. Pressure Rating(bar) TURBINE FLOW METERS WITH MALE THREADS
TURBINE ETERS WIT AE TREAS igh Accuracy Turbine Flow eter with ale Thread FTB200-EO etric ale Threads with Ermeto 24 Cone Fittings FTB200-O etric ale Threads with O-ring Face Seal Ends (ISO8434-3) 3) FTB200-N
More informationPSF50 Paddle flow switch
Paddle Flow Switch Paddle Flow Switch PSF50 Paddle flow switch Paddle flap flow / no flow switch Economically priced flow/no flow paddle operated flow switch. Simple and reliable design for liquids up
More informationFlow Sensors & Instruments
STAINESS STEE TURBINE FOWMETERS Serie X IG PRESSURE AND IG TEMPERATURE Principle of Operation The x range of Turbine Flowmeters meet the demand of most liquid measurement applications. They basically consist
More informationFT Series. Turbine Flowmeters. Description. Features. Applications. Operation. FT Series Turbine Flowmeters
FT Series Turbine Flowmeters Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because of their
More informationVHS... Screw Flow Meter
Member of the Group VHS... Screw Flow Meter The normal transmitter with block plug already has a push pull output to serve all NPN or PNP Inputs. It supplies a square wave signal. Those transducers are
More informationG2 SERIES INDUSTRIAL GRADE METERS
Industrial Grade Meters INDUSTRIAL GRADE METERS The unique modular approach of the Industrial Grade Meter line allows you to design a meter to match your specific application. Turbine choice depends on
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More informationA1 Commercial Grade Meters
A1 Commercial Grade Meters Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon only. A1 Meters are not field serviceable like
More informationIP800-Series FLOW SENSOR INSTRUCTIONS IP810 IP :2008 ISO CERTIFIED COMPANY IP80-SERIES FLOW SENSOR INSTRUCTIONS
IP80-SERIES FLOW SENSOR INSTRUCTIONS IP800-Series FLOW SENSOR INSTRUCTIONS IP810 IP820 9001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Features, Specifications...Page 3 Installation
More informationIP80-Series FLOW SENSOR INSTRUCTIONS IP81 IP :2008 ISO CERTIFIED COMPANY IP80-SERIES FLOW SENSOR INSTRUCTIONS
IP80-SERIES FLOW SENSOR INSTRUCTIONS IP80-Series FLOW SENSOR INSTRUCTIONS IP81 IP82 9 001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Features, Specifications...Page 3 Installation
More informationTX80-Series FLOW SENSOR INSTRUCTIONS TX81 TX :2008 ISO CERTIFIED COMPANY TX80-SERIES FLOW SENSOR INSTRUCTIONS
TX80-SERIES FLOW SENSOR INSTRUCTIONS TX80-Series FLOW SENSOR INSTRUCTIONS TX81 TX82 9 001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Specifications, Features...Page 1 Installation
More informationA1 SERIES COMMERCIAL GRADE METERS A1 SERIES COMMERCIAL GRADE METERS
COMMERCIAL GRADE METERS Look for the silver label! Look for the silver label! COMMERCIAL GRADE METERS Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters
More informationA1 Commercial Grade Meters
A1 Commercial Grade Meters Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon only. A1 Meters are not field serviceable like
More informationIP800-Series FLOW SENSOR INSTRUCTIONS IP810 IP :2008 ISO CERTIFIED COMPANY IP800-SERIES FLOW SENSOR INSTRUCTIONS
-SERIES FLOW SENSOR INSTRUCTIONS -Series FLOW SENSOR INSTRUCTIONS IP810 IP820 9001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Features, Specifications...Page 3 Installation Insertion
More informationTURBOVAC i Turbomolecular pumps
TURBOVAC i Turbomolecular pumps A giant leap in vacuum performance! It as never been so easy to improve your processes until now. TURBOVAC (T) 350-450 i will allow you to optimize pump down times and consistently
More informationPrinciple of Operation
Turbine Flow Meters Flow Technology Turbine Flow meters are commonly used in mission critical applications demanding superior accuracy, quality and reliability. Ideal for clean liquids and gases, such
More informationAxial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
More informationDOR. Insertion Paddle Wheel Flow Meter / Monitor. for Low Viscosity Liquids
Insertion Paddle Wheel Flow Meter / Monitor for Low Viscosity Liquids measuring monitoring analyzing DOR Flow Range: 5.5 180 GPM to 25,000 800,000 GPM Flow Velocity Range: 1.0...33.0 ft/s p max : 1160
More informationDTK. OEM Pelton Wheel Flow Sensor
OEM Pelton Wheel Flow Sensor measuring monitoring analyzing DTK Measuring Range: 0.8...9.5 to 6...90 GPH Water Measures Clear or Opaque Liquids Stainless Steel Body Pelton Wheel Design Requires No Inlet
More informationPaddle-wheel flow controller with optical principle for On/Off control
Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor
More informationBARTON 7400 Precision Gas Turbine Flow Meters
TECHNICAL SPECIFICATIONS BARTON 7400 Precision Gas Turbine Flow Meters BARTON Model 7400 Precision Turbine Flow Meters are designed for gas service in a wide range of industrial, commercial, pipeline and
More information...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
More informationOMP Positive Displacement Flowmeters
Flow Ranges From 0.53 to 26 GPH Through 4 to 132 GPH Handles Viscosities to 1,000,000 cps Handles Viscosities to 1,000,000 cps Low Head Loss Oval Gear Design OMP Series Medium & High Flow Meters OMP-1
More informationRUN ACCUM. TOTAL STOP BAT LOW HIGH
TURBOPULSE TURBINE FLOWMETER INSTRUCTION MANUAL gal RUN ACCUM. TOTAL STOP BAT LOW HIGH RESET > PROGRAM ENTER ACCUM TOTAL ^ RATE TOTAL TP050 TABLE OF CONTENTS 1. INTRODUCTION Overview 1 1.1 Model number
More informationSES. Stainless Single-Jet Meter Instructions PROUDLY MADE IN THE USA
SES Stainless Single-Jet Meter Instructions PROUDLY MADE IN THE USA ISO 9001:2008 Certified Company TABLE OF CONTENTS General Information General Information...Page 3 Features...Page 3 Specifications...Page
More informationTX800-Series FLOW SENSOR INSTRUCTIONS. TX81x TX82x 9 001:2008 ISO CERTIFIED COMPANY TX800-SERIES FLOW SENSOR INSTRUCTIONS
TX800-SERIES FLOW SENSOR INSTRUCTIONS TX800-Series FLOW SENSOR INSTRUCTIONS TX81x TX82x 9 001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Generial Information, Features...Page 3 Specifications...Page
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
More informationPA - Turbine Flowmeter Range
PA - Turbine Flowmeter Range PA - Turbine Flow Meter Range Our PA - Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore
More informationHigh Performance Turbine Technology
The Brooks Parity Turbine Meter Sizes 3" - 16" High Performance Turbine Technology Design Specifications DS2215-10 July, 1999 DESCRIPTION The Parity Turbine Flowmeter utilizes advanced turbine meter technology
More informationHTM Series Helical Turbine Meters
HTM Series Helical Turbine Meters The HTM series of turbine meters is designed for high accuracy volume measurement of crude oils and other liquid hydrocarbons. M&T helical turbine meters are preferred
More informationDOR Insertion Paddle Wheel Flowmeter
Benefits and Features Flow Range: 5.5 180 GPM to 25,000 800,000 GPM Flow Velocity Range: 1.0...33.0 ft/s pmax: 1160 PSI tmax: 300 F Connection: 1½" NPT, 2" NPT Male, R 1½, & R 2 Male for Pipe Sizes: 1½"...100"
More informationDOR. Insertion Paddle Wheel Flowmeter/Monitor. for low viscous liquids. Flow range: ,300 l/s to ,000 l/s. Flow velocity range: 0.
Insertion Paddle Wheel Flowmeter/Monitor for low viscous liquids measuring monitoring analysing DOR Flow range: 0.25 6,300 l/s to 0.4 49,000 l/s Flow velocity range: 0.3-10 m/s Viscosity range: low viscous
More informationTurbine Flow Meter Range
Turbine Flow Meter Range Our Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore provides continuous lubrication. This prolongs
More informationSAE J1939 CAN compatible sensors for hydraulic system monitoring of flow, pressure and temperature on pumps, valves and hydrostatic transmissions
SAE J99 CAN compatible sensors for hydraulic system monitoring of flow, pressure and temperature on pumps, valves and hydrostatic transmissions Milwaukee, WI, USA Tel: + () 769-600 sales-us@webtec.com
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationRCM - Direct Reading Flowmeters
Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More informationTEMPERATURE SENSOR ASSEMBLIES (PROBE)
Discription: TEMPERATURE SENSORS A temperature sensor is an element that sensed the temperature changes, then translate the measured temperature into an electrical signal which then providing the data
More informationIndustrial OG meter series IOG Inline and flanged oval gear meter
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Industrial OG meter series IOG Inline and flanged oval
More informationTHERMAL DISPERSION / PADDLE TYPE LEVEL SWITCH
THERMAL DISPERSION / PADDLE TYPE LEVEL SWITCH http: //www.fine-tek.com e-mail: info@fine-tek.com Tel: 886-2-22696789 Fax: 886-2-22686682 OPERATING PRINCIPLE Thermal dispersion flow switch is a precise
More informationCatalog 080-/USA Notes Vacuum Control Valves
Vacuum Control Valves Section Catalog 080-/USA Notes Vacuum Control Valves Catalog 080-/USA Index Vacuum Control Valves VA0 Vacuum Control Valves for Centralized Vacuum Systems VA0PSV & VA0PSP, -Port,
More informationLiquid Turbine Flowmeters
NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement In 1957, this flowmeter was developed with a tungsten-carbide shaft and bearing to withstand the rugged conditions of the oil field. Over the years,
More informationPubl. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
More informationVAS VAS VACUUM SWITCH SPECIFICATIONS. DIMENSIONS (mm)
VACUUM SWITCHES VAS VACUUM SWITCH Diaphragm vacuum switch Compact size Lightweight Inch port sizes 5/32, 1/4 & 5/16 Metric port sizes 4, 6 & 8mm Fully adjustable VAS 10 06 Series Body Size 10 Vacuum Port
More informationsupertorc Actuators and Controls
supertorc Actuators and Controls Contents supertorc Actuators 4 5 6 7 7 7 8 8 8 Basic actuator Module system Scotc-Yoke principle Manual actuator Electric actuator Cylinder actuator Sub-sea actuator Spring
More informationAxial Turbine Flow Sensor Series Turbotron VTH 25 / VTI 25 / VTM 25
Installation Instruction Axial Turbine Flow Sensor Series Turbotron VTH 25 / VTI 25 / VTM 25 Table of contents Page 1 Function of Turbotron 1 2 Safety instructions 2 3 Important notes and requirements
More information7000 Series Liquid Turbine Meters
BARTON 7000 Series Liquid Turbine Meters Models 71, 7, & 73 Barton 7000 series turbines are designed for a broad range of precise liquid measurement applications. Based on 35 years of turbine manufacturing,
More informationMANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
More informationOMP POSITIVE DISPLACEMENT FLOWMETERS
OMP POSITIVE DISPLACEMENT FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Flow Ranges from 0.53 to 26 GPH to 4 to 92 GPM Handles Viscosities to 1,000,000 cps Pressure Ratings
More informationG Rotary Unions For coolant, water, oil, and air service
Rotary Unions or coolant, water, oil, and air service Precision rotary unions for more effective cooling and lubrication. High speed rotating unions for transferring fluids and air. Contents Rotary Union
More informationCertified according to DIN EN ISO Technical Datasheet. HM Series. Turbine Flow Meters
Certified according to DIN EN ISO 9001 Technical Datasheet HM Series Turbine Flow Meters Description... 3 Principle... 3 Technical Data... 5 Measuring Ranges... 7 Pressure Drop... 9 Index Index Description
More informationHM...TC-R. Turbine Flow Meters for Solvents and Di-Water. Technical Datasheet
www.kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet HM...TC-R Turbine Flow Meters for Solvents and Di-Water HMTC-R_D_E_150128_E003 Application Turbine flow meters serve to accurate
More informationFLOWX3 F3.20 High Pressure Paddlewheel Flow Sensor MAIN FEATURES APPLICATIONS OPERATING PRINCIPLE
FLOWX3 F3.20 High Pressure Paddlewheel Flow Sensor FlowX3 F3.20 is a paddlewheel flow sensor suitable for system at high pressure and at critical temperature. F3.20 is designed for use with every kind
More informationS-Series. Low Flow Meter Instructions SPX SPT. Precision Flow Measurement An ONICON Brand PROUDLY MADE IN THE USA
S-Series Low Flow Meter Instructions Precision Flow Measurement An ONICON Brand PROUDLY MADE IN THE USA ISO 9001:2008 Certified Company TABLE OF CONTENTS General Information General Information...Page
More informationProduct Data Sheet. Turbine Flow Meter. QuikSert DESCRIPTION INSTALLATION FEATURES REPAIR KITS
DESCRIPTION Turbine Flow Meter QuikSert The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert s stainless steel body incorporates
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationSECTION 6 VACUSTAT, PRESSURE SENSORS, VACUUM SENSORS, & FILTERS
SYSTEM ACCESSORIES SECTI 6 VACUSTAT, PRESSURE SENSORS, VACUUM SENSORS, & FILTERS 6 2012 EDCO USA. www.edcousa.net 6:1 6 SYSTEM ACCESSORIES CTENTS VACUSTAT MECHANICAL PRESSURE SWITCH INLINE VACUUM FILTER
More informationSeaMetrics Flow Meters and Flow Computers
Distributed Products Fact Sheet and Flow Computers WTP-PVC body turbine flow meter WT-S Stainless steel body turbine flow meter TX115/215 Hottap insertion turbine flow meter FT420 Looppowered flow computer
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationGear Type Flow Meter VC
Gear Type Flow eter VC 2 RACHT COR. 6552 Weatherfield Court aumee, OH 43537 USA +1 419 874 F +1 419 874 6 flowmeters@krachtcorp.com www.krachtcorp.com Construction and Function 3 4 5 6 2 1 7 Construction
More informationTUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water)
Turbine Wheel Flowmeter Plastic Model for Liquids measuring monitoring analyzing TUR TUR with Transmitter TUR with ADI-1 Measuring Ranges: 5.3...88 GPM or 11...440 GPM (Water) Measuring Accuracy: ± 1%
More informationTest Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationTECHNICAL SPECIFICATIONS. Measuring Accuracy ±2% of full scale. Repeatability ±0.5% of full scale
TECHNICAL SPECIFICATIONS Measuring Accuracy ±2% of full scale Repeatability ±0.5% of full scale Flow Measuring Range 1/2 porting: 0.5 15 GPM (2 60 LPM) 3/4 1 porting: 1.5 50 GPM (60 200 LPM) Turn Down
More informationBARTON 7000 Series Liquid Turbine Meters
TECHNICAL SPECIFICATIONS BARTON 7000 Series Liquid Turbine Meters Cameron s BARTON 7000 series turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than
More informationMANN+HUMMEL Filters for Liquids
MANN+HUMML Filters for Liquids MANN+HUMML Industrial Filters Te MANN+HUMML Group is an international company wit its eadquarters in Ludwigsburg, Germany. Te group employs approx. 9500 people worldwide
More informationLiquid Turbine Flowmeters
NuFlo Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and bearing to withstand
More information2100 Turbine Flow Sensor
200 Turbine Flow Sensor Description Engineered specifically for small pipe diameter applications, the Signet 200 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3
More informationTHERMAL DISPERSION / PADDLE TYPE LEVEL SWITCH
THERMAL DISPERSION / PADDLE TYPE LEVEL SWITCH http: //www.fine-tek.com e-mail: info@fine-tek.com Tel: 886-2-22696789 Fax: 886-2-22686682 OPERATING PRINCIPLE Thermal dispersion flow switch is a precise
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationSP/SF Series Flow Switches
ISO-9001:2000 certified SP/SF Series Flow Switches More than just another level measurement company. Aplus Finetek Sensor, Inc. PRODUCT INTRODUCTION SP SERIES OPERATING PRINCIPLE SP SERIES The SP Series
More informationWATER & IRRIGATION METERS QUALITY FLOW METERS FOR THE AGRICULTURE AND AQUIFER MANAGEMENT. Quality Engineered Systems
WATER & IRRIGATION METERS QUALITY FLOW METERS FOR THE AGRICULTURE AND AQUIFER MANAGEMENT Quality Engineered Systems QMAG (MAGNETIC) FLOW METER The QSE (Magnetic) Flow Meter The QMag flow meter has been
More informationKDM ARMORED FLOW METER & SWITCH
KDM ARMORED FLOW METER & SWITCH Flow Pressure Level Temperature measurement monitoring control S2 Short Installation Length SS, PTFE or Hastelloy Wetted Parts Analog Output Available 110 F to + 390 F Temperature
More informationSERIES TBS INSERTION TURBINE TBS-0XX TBS-1XX
F- SERIES INSERTION TURBINE instructions -0XX -1XX Table of Contents GENERAL INFORMATION General Information Features, Specifications... Page 1 Installation Piping, Immersion, Positioning the Meter...
More informationHydraulic Diagnostic Products. Fixed Position and Portable Equipment. Catalog
Hydraulic Diagnostic Products Fixed Position and Portable Equipment Catalog Table of Contents Portable Hydraulic Testers General Design Features Page 3 Flo-Check USB Hydraulic System Analyzer Page 4-5
More informationTRANSMISSION SPECIFICS VALVE BODY COMPONENTS
TRANSMISSION SPECIFICS VALVE BODY COMPONENTS Valve body electrical components consist of: Pressure Regulator solenoids (EDS). Controlled by a Pulse Width Modulated (PWM) control signal from the TCM provides
More informationINDUSTRIAL METER CATALOG version seven
INDUSTRIAL METER CATALOG version seven TABLE OF CONTENTS G Series Precision Meters... Build-Your-Own... 4 G Series Meter Number Reference... 5 Stainless Steel GBT, GIT & GNT... 6 Stainless Steel GBP, GIP
More informationIndustrial Meter Catalog
Industrial Meter Catalog SEE INSIDE FOR THESE NEW PRODUCTS: GBM Series Mini Batcher... page 66 LM50M Mechanical Lube Meter... page 52 TM Digital Pulse Meter... page 53 VERSION 6 2008 888-996-3837 www.gpi.net
More informationDigital Vortex Flowmeter. digitalyewflo. Digital Vortex Flowmeter. Series
Digital Vortex meter digitalyewflo Digital Vortex meter Series Unrivaled Performance, Functionality and Ease of Use Series Standard Type / Multi-variable Type High Temperature / Cryogenic Type Reduced
More informationOM SERIES OVAL GEAR METERS. OM SERIES Oval Gear Meters
Oval Gear Meters OVAL GEAR METERS OM Series Oval Gear Meters are designed for low flow and high accuracy. OM Series Meters are great for viscous fluids. Units are available with from either a Reed Switch
More informationFlow meter Type Recordall (RCDL)
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Flow meter Type Recordall (RCDL) Bronze model Features
More informationRPFS. ROTA PULSE FLOW SENSOR (Slip Insertion Paddlewheel) DATASHEET FEATURES
FEATURES ROTA PULSE FLOW SENSOR (Slip Insertion Paddlewheel) DATASHEET ± 2.5% accuracy @ velocity range 0.5 to 8.5 m/sec. ± 1 % accuracy over linear range 0.7 to 7.0 m/sec. Repeatability of ±0.6%. NPN
More informationTX101/201 Insertion Turbine Instructions
TX101/201 Insertion Turbine Instructions General Information Sapphire bearings and a non-drag pick-off give these adjustable insertion turbine flow sensors a wide flow and long life. A Hall-effect device
More informationInnovation in level sensing Level measurement for tanks using guided wave radar technology
Innovation in level sensing Level measurement for tanks using guided wave radar technology Level sensing technology Now oil and aqueous media capable efector gwr level sensors for industrial applications
More informationZDM Positive Displacement Flow Meter User Instructions
ZDM Positive Displacement Flow Meter User Instructions USA 1801 Parkway View Drive Pittsburgh, PA 15205 PH 412-788-2830 Canada 9A Aviation Point Claire, QC H9R 4Z2 PH 514-428-8090 www.koboldusa.com ZDM_manual_05/17
More informationGas Turbine Flowmeters Robust performance and maximized availability across a range of applications
Gas Turbine Flowmeters Robust performance and maximized availability across a range of applications Content Gas Turbine Flowmeters Introduction................................................................................3
More informationTechnical Datasheet HM Series Turbine Flow Meters Certified according to DIN EN ISO 9001
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet HM Series Turbine Flow Meters Certified according to DIN EN ISO 9001 2 HM Series - Turbine Flow Meters Description Turbine flow meters (hereinafter
More informationSSI Technologies Application Note PS-AN7 MediaGauge (Model MG-MD) Digital Pressure Gauge Product Overview
Product Description The MediaGauge MG-MD is a multi-functional digital pressure gauge consisting of a media isolated piezoresistive pressure sensing element, signal conditioning circuitry for temperature
More informationTURBINE FLOW METER SELECTION GUIDE
TURBINE FLOW METER SELECTION GUIDE I. MODEL NUMBERING SYSTEM Format: F(B)-XX YY SERIES F-11 Single Turbine, Insertion Type (1¼" and larger pipes) F-12 Dual Turbine Insertion Type (2½" and larger pipes)
More informationModel: TUR with transmitter. Output: pulses, 0-20 ma, 4-20 ma or 0-10 V, LED display, pointer indication, switching output
Turbine Wheel Flow Meter plastic version for liquids measuring monitoring analysing Model: TUR with transmitter TUR Model: TUR with pointer indication Measuring ranges: 0.2-5.0... 2.5-100,0 m 3 /h water
More informationSM-00. Features. Impeller Flowmeter for Small Volumes of Fluid. Description: Application:
SM-00 Impeller meter for Small Volumes of Fluid Description: Features / Arnite, Ryton or PVDF / Up to 100 C / Up to 20 bar / Wide choice of operating range / Excellent media resistance The SM-00 is a universally
More informationDY-LWGY Liquid turbine flow meter
Typical Application: liquid with no impurities and no corrosion, such as water, diesel, methanol. DY-LWGY Liquid turbine flow meter One. Overview DY-LWGY series Turbine Flow has its simple structure, light
More informationCTR Series. Turbine low meters with conditioned output and built-in loading valve. Up to. Output Options. Features. Hydraulic measurement and control
CTR Series Turbine low meters with conditioned output and built-in loading valve Milwaukee, WI 323, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400
More informationE22 Proportional Technology
E22 Proportional www.numatics.com Pressure Control: E22 Proportional E22 Series Unlike SENTRONIC valves, E-Series valves operate with pulsed pilot valves which change the pressure in a control chamber.
More informationTX 115/215 Hot-tap Insertion Turbine Instructions
TX 115/215 Hot-tap Insertion Turbine Instructions General Information These hot tap versions of the proven TX insertion flow sensors are designed to install or be serviced without depressurizing the pipe.
More informationDIFFERENTIAL PRESSURE BATTERY CHARGERS
DIFFERENTIAL PRESSURE BATTERY CHARGERS CONVERTING PIPELINE ENERGY TO BATTERY POWER Free Uninterruptible Power 24/7 ISO 9001:2008 Certified Quality System 10-20 Watt Units Available POWER SYSTEMS 12 or
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationProduct Data Sheet. Exact Dual Rotor. Turbine Flow Meters DESCRIPTION CALIBRATIONS APPLICATIONS
Exact Dual Rotor Turbine Flow Meters DESRIPTION The ox Exact Dual Rotor Turbine Flow Meter is the pinnacle of turbine meter technology that delivers results not attainable with single rotor designs. The
More informationCrossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
More informationOEM relative pressure transmitter type 506
OEM relative pressure transmitter type 506 Pressure range -0.5... bar / 0... 10 60 bar Type 506 pressure transmitters are suitable for different applications in the field of industrial refrigeration due
More information