NEXON FLOW F-1. Specifications. Applications. Parameter Table. Max. Pressure Rating(bar) TURBINE FLOW METERS WITH MALE THREADS
|
|
- Ami Wilkinson
- 5 years ago
- Views:
Transcription
1 TURBINE ETERS WIT AE TREAS igh Accuracy Turbine Flow eter with ale Thread FTB200-EO etric ale Threads with Ermeto 24 Cone Fittings FTB200-O etric ale Threads with O-ring Face Seal Ends (ISO8434-3) 3) FTB200-N NPT ale Threads igh pressure resistance ow pressure loss Fast response time igh repeatability and accuracy Resistant to contamination Pulse / analog output selectable Fluid flowing through FTB200 causes the rotor to revolve. As the rotor blade pass the pickoffs, electrical pulses are produced in which frequency is proportional to the flow rate. The revolutions per minute and the K-factor (number of pulses/gallon) make it possible to obtain the flow volume passing through the unit. FTB200 series are used to measure medium or lower viscosity media, such as water, light fuel, solvent, hydraulic oil, lubricating oil etc. Specifications Applications FTB200-EO metric male threads with Ermeto 24 Petrochemical/energy industry cone fittings N4...N32N32 ydraulic/lubrication system Nominal iameter FTB200-O metric male threads with O-ring Water treatment face seal ends (ISO8434-3) 3) N4...N40N40 Oil / gas industry FTB200-N NPT male thread N10...N40 Test systems Applicable edium edium or lower viscosity i liquidsid Accuracy Better than ±1% of reading,±0.5% /±0.2% selectable Repeatability Pressure Rating edium Temperature aterials Body / Rotor Support Turbine Shaft Bearing Process Connection ±0.1% of reading AX. 420bar , ( high temprature type) 304 stainless steel (316 stainless steel optional) Stainless steel Tungsten carbide/ceramic Stainless steel ball bearing, Tungsten carbide/ceramic a c journal bearing...eo, O, N Parameter Table easuring Range (/in) Types agnetic Carrier frequency pickoff pickoff FTB FTB FTB FTB FTB FTB FTB FTB N (mm)...eo metric male threads with Ermeto 24 ax. Pressure Rating(bar) O metric male threads with O-ring N NPT male thread Filtration (micron) Journal bearing Ball bearing ( (18 1.5) 400 (1/4") (16 1.5) ) 400 (22 1.5) 300 (3/8") (24 1.5) 400 (27 1.5) 250 (1/2") (36 2) 300 (36 2) 250 (3/4") (42 2) 250 (42 2) 250 (1") (52 2) 160 (52 2) 250 (45 2) 160 (60 2) 250 (1-1/4") 160 (1-1/2") (64 2) 160 (2") F-1
2 TURBINE ETERS WIT AE TREAS Pickoffs & Amplifiers FTB200 can be integrated with several different pickoffs, preamplifiers and signal conditioners, such as magnetic pickoffs, carrier frequency pickoffs, linear correction preamplifiers, smart control units, to meet specific measurement needs. Pickoffs agnetic pickoffs can sense a ferrous rotor and is ideal for use in all types of Nexon turbine flow meters. Options include cryogenic, high temperature and explosion proof. Carrier frequency pickoffs offer low speed response, no drag, large sensing distance and can sense non-ferrous metals like aluminum or nonmagnetic stainless steel in addition to ferrous metal. Unlike magnetic pickoff, an carrier frequency pickoff is not a passive device and requires coupling with a signal conditioners/preamplifier. These devices produce a square wave output versus the analog sine wave of the magnetic pickoff. Amplifiers Nexon has developed d a line of preamplifiers and signal conditioners i for installation i with our pickoffs. Our offerings include preamplifiers in several different configurations. Pulse output amplifier - Output with square signal, proportional to the flow rate. Amplifier with linearized pulse output - Extending the measuring range and with multi-point linearization, with square wave output, frequency proportional to the flow rate. Amplifier with analog output - Current analog output or voltage analog output, such as 0-10V, 0-5V, 0-20mA, 4-20mA. Amplifier with linearized analog output - Extended measuring range and with multi-point linearization, analog output. Intelligent flow computer - igital display, analog output / communication RS485/ switch output optional. Bearings Bearings are available in three styles, stainless steel ball, tungsten carbide journal sleeve and ceramic journal sleeve. Ceramic bearing eliminate adhesive wear and perform well in low or non-lubricating liquids found in cryogenic fluids and water. Ball bearings have the least amount of drag, thus provide the widest capable flow range. Journal bearings create more drag, therefore reducing the turndown capability of the flow meter. Tungsten carbide journal bearing - Applicable cabeto low or non-lubricating media, eda, narrow turndown ratio of the flow meter relative with ball bearing. Stainless steel ball bearing - Applicable to lubricating media, with low friction, lower limit for flow meter and wider turndown ratio. Ceramic journal bearing - Self-lubricating, applicable to non-lubricating media such as liquid nitrogen, narrow turndown ratio of the flow meter relative with ball bearing. F-2
3 TURBINE ETERS WIT AE TREAS Electronics FTB200 series assembled with below pickoffs: VS - agnetic pickoffs with pulse output amplifier RS - Carrier frequency pickoffs with pulse output amplifier Power Supply Current Consumption 8mA Outputs Reverse Polarity Proof Short-circuit Proof Electrical Connection Protection Class 12 30VC NPN OC output; NPN OC output+pull-up resistor Yes Yes x1plug IN43650-A plug (solenoid plug) 12X1plug: IP67 IN43650-A plug: IP65 V - igh temperature magnetic pickoffs with pulse output amplifier R - igh temperature carrier frequency pickoffs with pulse output amplifier V R Other parameters please refer to the above Wiring - Pusle Output Wiring PNP output NPN output x1plug Signal Plug U+ 1 Pulse 4 U- 3 Cable Brown Black Blue Solenoid plug Signal Plug U+ 1 Pulse 3 U- 2 F-3
4 TURBINE ETERS WIT AE TREAS VA - agnetic pickoffs with analog output amplifier RA - Carrier frequency pickoffs with analog output amplifier Power Supply Current Consumption 12 30VC Voltage analog output: 7mA Current analog output: <12mA Outputs ts 0 10V 3-wire (0) 4 20mA Reverse Polarity Proof Yes Short-circuit Proof Yes Electrical Connection 12x1plug IN43650-A plug (solenoid plug) Protection Class 12X1plug: IP67 IN43650-A plug: IP65 VA - igh temperature magnetic pickoffs with analog output amplifier RA - igh temperature carrier frequency pickoffs with analog output amplifier VA RA Other parameters please refer to the above Wiring - Analog Output : 3-wiring mA Wiring mA ( 3-wire) Signal Plug U+ 1 Cable Brown 3 4 output 2 White U- 3 Blue 12x1plug Solenoid plug Signal Plug U+ 1 output 3 U- 2 F-4
5 TURBINE ETERS WIT AE TREAS WEVS - Smart control unit with magnetic pickoffs WERS - Smart control unit with carrier frequency pickoffs Power Supply (Us) Current Consumption Switching Output Vdc <20mA Output t Push-pull (compatible with PNP / NPN) Current Current Analog Output Output 500mA(power supply 24Vdc) 3/2-wire mA programable oad RA(Ω) RA (Us-10) /0.02 inearity Voltage Analog Output Output oad RA(Ω) inearity Accuracy Temperature Ambient/Storage isplay aterial isplay ead ousing Protection Class Electrical Connection ±0.5% of reading 3-wire 0...5V/1...5V programable RA 5KΩ ±0.5% of reading ±0.5% of reading mm height, red 4-digit E 304 stainless steel (316 customized) + PP 304 stainless steel (316 customized) IP plug WEV - Smart control unit with high temperature magnetic pickoffs WER - Smart control unit with high h temperature carrier frequency pickoffs Other parameters please refer to the above Wiring PNP output NPN output 2x PNP + analog output 2x NPN + analog output F-5
6 TURBINE ETERS WIT AE TREAS imensions of FTB200-EO metric male threads with ermeto 24 cone fittings 12X1plug for pulse output X1plug for analog output Smart control unit F-6
7 TURBINE ETERS WIT AE TREAS imensions of FTB200-O metric male threads with O-ring face seal ends (ISO8434-3) 12X1plug for pulse output X1plug for analog output Smart control unit F-7
8 TURBINE ETERS WIT AE TREAS imensions of FTB200-N NPT male threads 12X1plug for pulse output 12X1plug for analog output Smart control unit G G NEXON G F-8
9 TURBINE ETERS WIT AE TREAS imensions...eo (Nominal iameter) for pulse output for analog for smart control output unit 1/4" (N4) 1.97 (50) 1.3 (33) 3.35(85) 5.16 (131) 5.31 (135) 1/4" (N6) (50) (33) (86) 5.2 (132) 5.35 (136) 3/8" (N10) 2.01 (51) 1.42 (36) 3.46 (88) 5.28 (134) 5.43 (138) 1/2" (N15) 3.98 (101) 185(47) (90) 5.35 (136) (140) 3/4" (N20) 4.76 (121) 2.05 (52) 3.66 (93) 5.47 (139) 1-1/4" (N32) 6.38 (162) 2.6 (66) 3.9 (99) 5.71(145) 5.63 (143) 1" (N25) 5.12 (130) 2.2 (56) 3.74 (95) 5.55 (141) 5.71 (145) 5.87 (149) O / N for pulse output (Nominal iameter) for analog output 1/4" (N6) 1.73 (44) 1.3 (33) 3.39 (86) 5.2 (132) for smart control unit 1/4" (N4) 1.73 (44) 1.3 (33) 3.35(85) 5.16 (131) 5.31 (135) 1/2" (N15) 3.54 (90) 1.85 (47) 3.54(90) 5.35 (136) 5.35 (136) 3/8" (N10) 1.77 (45) 1.42 (36) 3.46 (88) 5.28 (134) 5.43 (138) 1" (N25) 4.45 (113) 2.2 (56) 3.74 (95) 5.55 (141) 5.51 (140) 3/4" (N20) 4.21 (107) 2.05 (52) 3.66 (93) 5.47 (139) 5.63 (143) 1-1/2" (N40) 6.5 (165) 30(76) (103) 5.87 (149) 5.71 (145) 1-1/4" (N32) 5.6 (142) 2.6 (66) 3.9 (99) 5.71(145) 5.87 (149) 6.02 (153) F-9
10 TURBINE ETERS WIT AE TREAS Order Code FTB200 : Thread type EO: O: N: Turbine flow meter etric male threads with Ermeto 24 cone fittings etric male threads with O-ring face seal ends (ISO8434-3) NPT male thread Nominal diameter (see parameter table for details) 04 : N4 thread size 06 : N6 thread size 10 : N10 thread size 15 : N15 thread size 20 : N20 thread size 25 : N25 thread size 32 : N32 thread size 40 : N40 thread size Bearing BB : TC : CC : Stainless steel ball bearing (unavailable for N4 and N6) Tungsten carbide journal bearing Ceramic journal bearing FTB200 EO 15 BB B VS - F-10 Accuracy A: 0.2% of reading C: 1% of reading B : 0.5% of reading S : Customized easuring range (see parameter table for details) 4.5 : Upper flow limit 4.5/min 130 : Upper flow limit 130/min 10 : Upper flow limit 10/min 170 : Upper flow limit 170/min 20 : Upper flow limit 20/min 250 : Upper flow limit 250/min 100 : Upper flow limit 100/min 320 : Upper flow limit 320/min Turndown ratio (Upper flow limit : lower flow limit) 1 : 10:1 3 : 30:1 5 : 50:1 2 : 20:1 4 : 40:1 Note: eter with wide turndown ratio (40:1 or 50:1) should be used with carrier frequency pickoffs and stainless steel ball bearing. Pickoffs type (see electronics for details) VS : magnetic pickoffs with pulse output amplifier V : VA : VA : RS: R: RA: RA: igh temperature magnetic pickoffs with pulse output amplifier magnetic pickoffs with analog output amplifier igh temperature magnetic pickoffs with analog output amplifier Carrier frequency pickoffs with pulse output amplifier igh temperature carrier frequency pickoffs with pulse output amplifier Carrier frequency pickoffs with analog output amplifier igh temperature carrier frequency pickoffs with analog output amplifier WEVS : Smart control unit with magnetic pickoffs WEV : Smart control unit with high temperature magnetic pickoffs WERS : WER : Smart control unit with carrier frequency pickoffs Smart control unit with high temperature carrier frequency pickoffs Outputs - : Pulse A420 : 4 20mA V005 : 0 5V A020 : 0 20mA V010 : 0 10V V105 : 1 5V Electrical connection : S : IN43650-A plug (unavailable for WE series) 12X1 plug
11 NEXON TURBINE ETERS WIT AE TREAS Electronic Evaluation Units ST200 - Ratemeter, batcher, totalizer Flow meter/totalizer Flow rate/total flow dispay 1 pulse input 1 relay (or OC) output Power supply output 24V C RS-485 / odbus RTU Protection class IP67 Flow rate/total flow dispay 1 pulse counting input + 3 control inputs 0/2 or 4 RE / OC outputs Analog output optional Power supply output 24V C RS 485 / odbus RTU RS-485 ax. ax 72 inputs with the flow/temperaturee Optional outputs with 24 analog outputs /72 SSR outputs ata recording and display Case dimensions 144X144X100 C i i iinterfaces: f RS 485/ db RTU Communication RS-485/odbus RTU, USB USB, Analog output optional Earthnet 10B enhanced AC version Power supply output 24V C 0/2 or 4 RE / OC outputs Flow meter/totalizer/batcher Flow rate/total flow dispay /pressure/level Flow meter/totalizer/batcher 1 pulse counting input + 3 control inputs 6-digit E display Controller, Recorder CN100 - Controller Case dimensions 110 x 80 x 67mm 6-digit E display Case dimensions 96 x 48 x 100 mm 5.7'', TFT color graphic display with Touch-panel, ST100 - Ratemeter, Ratemeter batcher, batcher totalizer 6-digit E display Case dimensions 72 x 36 x 97 mm ST300 - Ratemeter, totalizer Recording speed: from 0.1s upto 24h, resolution 0.1s RS-485 / odbus RTU 320X240 pixels emory capacity: 1.5 GB Free configuration software F-11
FFM04 Industrial grade high accuracy turbine flow meter
FFM0 Industrial grade ig accuracy turbine flow meter New Higly Sensitive Metal SUS Ceramics Core Bearings ow loss power & pressure Power Microflow amount Precision Measurement SUS ( VS / VH ) mm ow 0 bar
More informationGear Type Flow Meter VC
Gear Type Flow eter VC 2 RACHT COR. 6552 Weatherfield Court aumee, OH 43537 USA +1 419 874 F +1 419 874 6 flowmeters@krachtcorp.com www.krachtcorp.com Construction and Function 3 4 5 6 2 1 7 Construction
More informationPSF50 Paddle flow switch
Paddle Flow Switch Paddle Flow Switch PSF50 Paddle flow switch Paddle flap flow / no flow switch Economically priced flow/no flow paddle operated flow switch. Simple and reliable design for liquids up
More informationFT Series. Turbine Flowmeters. Description. Features. Applications. Operation. FT Series Turbine Flowmeters
FT Series Turbine Flowmeters Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because of their
More informationFlow Sensors & Instruments
STAINESS STEE TURBINE FOWMETERS Serie X IG PRESSURE AND IG TEMPERATURE Principle of Operation The x range of Turbine Flowmeters meet the demand of most liquid measurement applications. They basically consist
More informationA1 Commercial Grade Meters
A1 Commercial Grade Meters Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon only. A1 Meters are not field serviceable like
More informationPaddle-wheel flow controller with optical principle for On/Off control
Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More informationA1 Commercial Grade Meters
A1 Commercial Grade Meters Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon only. A1 Meters are not field serviceable like
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More informationA1 SERIES COMMERCIAL GRADE METERS A1 SERIES COMMERCIAL GRADE METERS
COMMERCIAL GRADE METERS Look for the silver label! Look for the silver label! COMMERCIAL GRADE METERS Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationDOR Insertion Paddle Wheel Flowmeter
Benefits and Features Flow Range: 5.5 180 GPM to 25,000 800,000 GPM Flow Velocity Range: 1.0...33.0 ft/s pmax: 1160 PSI tmax: 300 F Connection: 1½" NPT, 2" NPT Male, R 1½, & R 2 Male for Pipe Sizes: 1½"...100"
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS LC pressure and temperature compensated flowmeter easy and cost effective installation of the senor no pressure loss caused by the sensor no moving parts, i.e.
More informationIndustrial Meter Catalog
Industrial Meter Catalog SEE INSIDE FOR THESE NEW PRODUCTS: GBM Series Mini Batcher... page 66 LM50M Mechanical Lube Meter... page 52 TM Digital Pulse Meter... page 53 VERSION 6 2008 888-996-3837 www.gpi.net
More information2100 Turbine Flow Sensor
200 Turbine Flow Sensor Description Engineered specifically for small pipe diameter applications, the Signet 200 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3
More informationElectromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids Flow rate measurement is independent of density, temperature, viscosity and pressure Pulsed coil excitation to
More informationIndustrial OG meter series IOG Inline and flanged oval gear meter
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Industrial OG meter series IOG Inline and flanged oval
More informationRUN ACCUM. TOTAL STOP BAT LOW HIGH
TURBOPULSE TURBINE FLOWMETER INSTRUCTION MANUAL gal RUN ACCUM. TOTAL STOP BAT LOW HIGH RESET > PROGRAM ENTER ACCUM TOTAL ^ RATE TOTAL TP050 TABLE OF CONTENTS 1. INTRODUCTION Overview 1 1.1 Model number
More informationHydro-Flow 2200 Fixed Insertion Vortex Flow Meter
A trademark of Spirax Sarco, Inc. Hydro-Flow 2200 Fixed Insertion Vortex Flow Meter Description The Hydro-Flow Model 2200 fixed insertion vortex flow meter was designed specifically for water flow measurement,
More informationDOR. Insertion Paddle Wheel Flow Meter / Monitor. for Low Viscosity Liquids
Insertion Paddle Wheel Flow Meter / Monitor for Low Viscosity Liquids measuring monitoring analyzing DOR Flow Range: 5.5 180 GPM to 25,000 800,000 GPM Flow Velocity Range: 1.0...33.0 ft/s p max : 1160
More informationINDUSTRIAL METER CATALOG version seven
INDUSTRIAL METER CATALOG version seven TABLE OF CONTENTS G Series Precision Meters... Build-Your-Own... 4 G Series Meter Number Reference... 5 Stainless Steel GBT, GIT & GNT... 6 Stainless Steel GBP, GIP
More informationHydro-Flow 2300 Fixed Insertion Vortex Flow Meter
Hydro-Flow 2300 Fixed Insertion Vortex Flow Meter Description The Hydro-Flow Model 2300 insertion vortex flow meter was designed specifically for water flow measurement, containing no moving parts like
More informationIP800-Series FLOW SENSOR INSTRUCTIONS IP810 IP :2008 ISO CERTIFIED COMPANY IP800-SERIES FLOW SENSOR INSTRUCTIONS
-SERIES FLOW SENSOR INSTRUCTIONS -Series FLOW SENSOR INSTRUCTIONS IP810 IP820 9001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Features, Specifications...Page 3 Installation Insertion
More informationHTM Series Helical Turbine Meters
HTM Series Helical Turbine Meters The HTM series of turbine meters is designed for high accuracy volume measurement of crude oils and other liquid hydrocarbons. M&T helical turbine meters are preferred
More informationG2 SERIES INDUSTRIAL GRADE METERS
Industrial Grade Meters INDUSTRIAL GRADE METERS The unique modular approach of the Industrial Grade Meter line allows you to design a meter to match your specific application. Turbine choice depends on
More informationIP800-Series FLOW SENSOR INSTRUCTIONS IP810 IP :2008 ISO CERTIFIED COMPANY IP80-SERIES FLOW SENSOR INSTRUCTIONS
IP80-SERIES FLOW SENSOR INSTRUCTIONS IP800-Series FLOW SENSOR INSTRUCTIONS IP810 IP820 9001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Features, Specifications...Page 3 Installation
More informationCertified according to DIN EN ISO Technical Datasheet. HM Series. Turbine Flow Meters
Certified according to DIN EN ISO 9001 Technical Datasheet HM Series Turbine Flow Meters Description... 3 Principle... 3 Technical Data... 5 Measuring Ranges... 7 Pressure Drop... 9 Index Index Description
More informationFlow Transmitter / Switch OMNI-RR..32
Flow Transmitter / Switch OMNI-RR..32 OPTION C: Preset Counter with external reset option, complementary switching outputs and actual value display. OPTION C1: Instantaneous value display with analogue
More informationPA - Turbine Flowmeter Range
PA - Turbine Flowmeter Range PA - Turbine Flow Meter Range Our PA - Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore
More informationTX80-Series FLOW SENSOR INSTRUCTIONS TX81 TX :2008 ISO CERTIFIED COMPANY TX80-SERIES FLOW SENSOR INSTRUCTIONS
TX80-SERIES FLOW SENSOR INSTRUCTIONS TX80-Series FLOW SENSOR INSTRUCTIONS TX81 TX82 9 001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Specifications, Features...Page 1 Installation
More informationSRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback
with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical
More informationPrinciple of Operation
Turbine Flow Meters Flow Technology Turbine Flow meters are commonly used in mission critical applications demanding superior accuracy, quality and reliability. Ideal for clean liquids and gases, such
More informationOM SERIES OVAL GEAR METERS. OM SERIES Oval Gear Meters
Oval Gear Meters OVAL GEAR METERS OM Series Oval Gear Meters are designed for low flow and high accuracy. OM Series Meters are great for viscous fluids. Units are available with from either a Reed Switch
More informationSES. Stainless Single-Jet Meter Instructions PROUDLY MADE IN THE USA
SES Stainless Single-Jet Meter Instructions PROUDLY MADE IN THE USA ISO 9001:2008 Certified Company TABLE OF CONTENTS General Information General Information...Page 3 Features...Page 3 Specifications...Page
More informationFlow Transmitter / Switch OMNI-RR..32
Flow Transmitter / Switch OMNI-RR..32 OPTION C: Preset Counter with external reset option, complementary switching outputs and actual value display. OPTION C: Instantaneous value display with analogue
More informationHoffer Engineering Guide for Liquids
Hoffer Engineering Guide for Liquids Accurate, Versatile, Economical... www.hofferflow.com Principle of Operation: Hoffer inline turbine flowmeters are velocity measuring devices, which is to say they
More informationIP80-Series FLOW SENSOR INSTRUCTIONS IP81 IP :2008 ISO CERTIFIED COMPANY IP80-SERIES FLOW SENSOR INSTRUCTIONS
IP80-SERIES FLOW SENSOR INSTRUCTIONS IP80-Series FLOW SENSOR INSTRUCTIONS IP81 IP82 9 001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Features, Specifications...Page 3 Installation
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up
More informationInformation. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS
Information SC Corporation Akihabara UDX 1F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 1-21, JAPAN http://www.smcworld.com 12 SC Corporation All Rights Reserved Electric Actuator/Rod Type Series EY AC Servo
More informationAxial Turbine Flow Sensor Series Turbotron VTH 25 / VTI 25 / VTM 25
Installation Instruction Axial Turbine Flow Sensor Series Turbotron VTH 25 / VTI 25 / VTM 25 Table of contents Page 1 Function of Turbotron 1 2 Safety instructions 2 3 Important notes and requirements
More informationHM...TC-R. Turbine Flow Meters for Solvents and Di-Water. Technical Datasheet
www.kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet HM...TC-R Turbine Flow Meters for Solvents and Di-Water HMTC-R_D_E_150128_E003 Application Turbine flow meters serve to accurate
More informationZDM Positive Displacement Flow Meter User Instructions
ZDM Positive Displacement Flow Meter User Instructions USA 1801 Parkway View Drive Pittsburgh, PA 15205 PH 412-788-2830 Canada 9A Aviation Point Claire, QC H9R 4Z2 PH 514-428-8090 www.koboldusa.com ZDM_manual_05/17
More informationVHS... Screw Flow Meter
Member of the Group VHS... Screw Flow Meter The normal transmitter with block plug already has a push pull output to serve all NPN or PNP Inputs. It supplies a square wave signal. Those transducers are
More informationPROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control
PROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control 3 ports Series 608 609 FEATURES Sentronic D is a highly dynamical 3-way
More informationF111.X Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description.
F111.X Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL EN 08-05 Table of Contents 1. Introduction 2 1.1. Safety Instructions 2 1.2. Unpacking 2 2. Description. 2 2.1. Main Features.. 3 2.2. Technical
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection
More informationOM004, OM006 & OM008 Oval Gear Meter
OM SERIES OM004, OM006 & OM008 Oval Gear Meter OM004 (1/8"), OM006 (1/4") and OM008 (3/8") Oval Gear Meters ACCURACY: ±1.0% OF READING Select Your Body Material: Aluminum or Stainless Steel The OM Small
More informationFlow meter Type Recordall (RCDL)
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Flow meter Type Recordall (RCDL) Bronze model Features
More informationFLOWX3 F3.20 High Pressure Paddlewheel Flow Sensor MAIN FEATURES APPLICATIONS OPERATING PRINCIPLE
FLOWX3 F3.20 High Pressure Paddlewheel Flow Sensor FlowX3 F3.20 is a paddlewheel flow sensor suitable for system at high pressure and at critical temperature. F3.20 is designed for use with every kind
More informationBARTON 7400 Precision Gas Turbine Flow Meters
TECHNICAL SPECIFICATIONS BARTON 7400 Precision Gas Turbine Flow Meters BARTON Model 7400 Precision Turbine Flow Meters are designed for gas service in a wide range of industrial, commercial, pipeline and
More informationTechnical Datasheet HM Series Turbine Flow Meters Certified according to DIN EN ISO 9001
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet HM Series Turbine Flow Meters Certified according to DIN EN ISO 9001 2 HM Series - Turbine Flow Meters Description Turbine flow meters (hereinafter
More informationHydraulic Diagnostic Products. Fixed Position and Portable Equipment. Catalog
Hydraulic Diagnostic Products Fixed Position and Portable Equipment Catalog Table of Contents Portable Hydraulic Testers General Design Features Page 3 Flo-Check USB Hydraulic System Analyzer Page 4-5
More informationDaniel Liquid Turbine Flow Meter Technical Guide
Liquid Turbine Flow Meters Daniel Liquid Turbine Flow Meter Technical Guide www.daniel.com TABLE OF CONTENTS Turbine Meter Parameters...1 The Daniel Series 1200 and 1500 Liquid Turbine Flow Meter Systems...
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationData Sheet. I/P and E/P converters. RS stock numbers ,
Data Pack G Issued March 997 3-4998 Data Sheet I/P and E/P converters RS stock numbers 79-47, 79-48 Standard (electro-mechanical) Construction Housing Zinc diecastings, passivated and black epoxy paint,
More informationHigh Performance Turbine Technology
The Brooks Parity Turbine Meter Sizes 3" - 16" High Performance Turbine Technology Design Specifications DS2215-10 July, 1999 DESCRIPTION The Parity Turbine Flowmeter utilizes advanced turbine meter technology
More informationFlow Transmitter / Switch OMNI-RR..32
Flow Transmitter / Switch OMNI-RR..32 By turning the ring to right or left, it is simple to modify the parameters (e.g. switching point, hysteresis...). To protect from unintended programming, it can be
More informationTURBINE METERS - WP Series
TURBINE METERS - WP Series Operating Pressure 150 psi Maximum Operating Temperature Cold Water 105 F (40 ) 3 Layers Epoxy Coating SIZE 2" 3" 4" 6" 8" Max. Flow Rate GPM 400 850 1100 2600 4400 Transition
More informationLiquid Turbine Flow Meter OwnerÊs Manual
Liquid Turbine Flow Meter OwnerÊs Manual Manual LWGY-G Rev.1.0 Content 1.0 GENERAL INFORMATION... 1 2.0 SPECIFICATIONS... 2 3.0 OPERATION CONDITIONS... 3 4.0 CAUTIONS FOR INSTALLATION... 4 5.0 DIMENSION...
More informationDTK. OEM Pelton Wheel Flow Sensor
OEM Pelton Wheel Flow Sensor measuring monitoring analyzing DTK Measuring Range: 0.8...9.5 to 6...90 GPH Water Measures Clear or Opaque Liquids Stainless Steel Body Pelton Wheel Design Requires No Inlet
More information7000 Series Liquid Turbine Meters
BARTON 7000 Series Liquid Turbine Meters Models 71, 7, & 73 Barton 7000 series turbines are designed for a broad range of precise liquid measurement applications. Based on 35 years of turbine manufacturing,
More informationINTELLIGENT FLANGE STRÖTER. Magnetic pulse generator
INTELLIGENT FLANGE STRÖTER agnetic pulse generator Incremental magnetic pulse generator addons to drive systems is now possible in an easy and economical way both in new and existing installations. The
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationS-Series. Low Flow Meter Instructions SPX SPT. Precision Flow Measurement An ONICON Brand PROUDLY MADE IN THE USA
S-Series Low Flow Meter Instructions Precision Flow Measurement An ONICON Brand PROUDLY MADE IN THE USA ISO 9001:2008 Certified Company TABLE OF CONTENTS General Information General Information...Page
More informationDemanding Applications. Essential Fluids. For Your Challenging Automotive Applications...
Visit us on the web at: www.ftimeters.com Demanding Applications. Essential Fluids. For Your Challenging Automotive Applications... A U T O M O T I V E In the automotive industry, measuring the flow of
More informationType 2REX-A. Oil & Gas / Heavy Industry
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
More informationTurbine Flow Meter Range
Turbine Flow Meter Range Our Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore provides continuous lubrication. This prolongs
More informationMODEL 106F TEFLON LIQUID FLOW SENSOR
TEFLON LIQUID FLOW SENSOR [ Advanced microturbine design for repeatable results - with no particle shedding & no zero drift [ Compatible with solvents, deionized water, acids, CMP slurries, etc. [ Extremely
More informationDOR. Insertion Paddle Wheel Flowmeter/Monitor. for low viscous liquids. Flow range: ,300 l/s to ,000 l/s. Flow velocity range: 0.
Insertion Paddle Wheel Flowmeter/Monitor for low viscous liquids measuring monitoring analysing DOR Flow range: 0.25 6,300 l/s to 0.4 49,000 l/s Flow velocity range: 0.3-10 m/s Viscosity range: low viscous
More informationTX800-Series FLOW SENSOR INSTRUCTIONS. TX81x TX82x 9 001:2008 ISO CERTIFIED COMPANY TX800-SERIES FLOW SENSOR INSTRUCTIONS
TX800-SERIES FLOW SENSOR INSTRUCTIONS TX800-Series FLOW SENSOR INSTRUCTIONS TX81x TX82x 9 001:2008 ISO CERTIFIED COMPANY TABLE OF CONTENTS General Information Generial Information, Features...Page 3 Specifications...Page
More informationBARTON 7000 Series Liquid Turbine Meters
TECHNICAL SPECIFICATIONS BARTON 7000 Series Liquid Turbine Meters Cameron s BARTON 7000 series turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than
More informationKEL. Heavy Duty Differential Pressure Flowmeters
Heavy Duty Differential Pressure Flowmeters measuring monitoring analyzing KEL Rugged Metal Construction Flow Rates up to 2000 GPM Linear Scales For Horizontal or Vertical s Threaded or Wafer Style s Able
More informationWATER & IRRIGATION METERS QUALITY FLOW METERS FOR THE AGRICULTURE AND AQUIFER MANAGEMENT. Quality Engineered Systems
WATER & IRRIGATION METERS QUALITY FLOW METERS FOR THE AGRICULTURE AND AQUIFER MANAGEMENT Quality Engineered Systems QMAG (MAGNETIC) FLOW METER The QSE (Magnetic) Flow Meter The QMag flow meter has been
More informationElectromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement
More informationSECTION 6 VACUSTAT, PRESSURE SENSORS, VACUUM SENSORS, & FILTERS
SYSTEM ACCESSORIES SECTI 6 VACUSTAT, PRESSURE SENSORS, VACUUM SENSORS, & FILTERS 6 2012 EDCO USA. www.edcousa.net 6:1 6 SYSTEM ACCESSORIES CTENTS VACUSTAT MECHANICAL PRESSURE SWITCH INLINE VACUUM FILTER
More informationTURBINE FLOW METER SELECTION GUIDE
TURBINE FLOW METER SELECTION GUIDE I. MODEL NUMBERING SYSTEM Format: F(B)-XX YY SERIES F-11 Single Turbine, Insertion Type (1¼" and larger pipes) F-12 Dual Turbine Insertion Type (2½" and larger pipes)
More informationProduct Data Sheet. Turbine Flow Meter. QuikSert DESCRIPTION INSTALLATION FEATURES REPAIR KITS
DESCRIPTION Turbine Flow Meter QuikSert The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert s stainless steel body incorporates
More informationFlow Meters & Instruments. Insertion Paddle Wheel & Magnetic Flow Meters Flow & Anaytical Instruments. Technical Catalogue
Flow Meters & Instruments Insertion Paddle Wheel & Magnetic Flow Meters Flow & Anaytical Instruments Technical Catalogue PDF Published October 19, 2017 flow sensors Type F3.01 Direct Mount Flow Sensors
More informationSM-00. Features. Impeller Flowmeter for Small Volumes of Fluid. Description: Application:
SM-00 Impeller meter for Small Volumes of Fluid Description: Features / Arnite, Ryton or PVDF / Up to 100 C / Up to 20 bar / Wide choice of operating range / Excellent media resistance The SM-00 is a universally
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationVALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology
VALVE CONTROLLERS Controllers for Dust Extraction 2010 Technology / 2011 Valve controllers for all cases HESCH has the skills and technology to tackle any control task for dedusting of filter and dust
More informationSentronic PLUS 614 Series
Sentronic PLUS 64 Series Proportional Technology www.asco.com PRESSURE CONTROL: 64 SERIES SENTRONIC PLUS Sentronic PLUS Sentronic PLUS is a digitally operated pressure regulator valve. This valve accurately
More informationMaterial: Weight: Shaft Loads: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
More informationElectromagnetic Flowmeters. Product Overview.
Electromagnetic Flowmeters Product Overview www.lcmeter.com Premier products, premier performance Liquid Controls offers a broad selection of electromagnetic (Mag) flow meters for industrial and water
More informationPubl. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
More informationITVX Series. Stepless control of air pressure proportional to an electrical signal. Supply pressure: 5.0 MPa
5.0 MPa Maximum Supply Pressure High Pressure Electro-Pneumatic Regulator X Series This product is only for blowing gas. This product does not have sufficient pressure control for other applications (driving,
More informationRCM - Direct Reading Flowmeters
Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale
More informationflow x3 flow monitoring
flow x3 flow monitoring The FlowX3 System includes a complete range of paddle wheel flow sensors, instruments and sensor installation fittings. Also included are insertion type electromagnetic flow transmitters.
More informationOMP Positive Displacement Flowmeters
Flow Ranges From 0.53 to 26 GPH Through 4 to 132 GPH Handles Viscosities to 1,000,000 cps Handles Viscosities to 1,000,000 cps Low Head Loss Oval Gear Design OMP Series Medium & High Flow Meters OMP-1
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationLinear Drive-Accessories (Mountings and Magnetic Switches) Series OSP-P
- (Mountings and Magnetic Switches) Series OSP-P Contents Description Page Overview 65-66 Clevis Mounting 67-68 End Cap Mountings 69 End Cap Mountings (for s with guides) 71, 72, 74, 75 Mid-Section Support
More informationSolid State Electronic Pressure Switch with Integral LED Display Model PSD-10
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control
More informationH 58 H 59. Custom Made. Custom Made
58 Custom ade Custom ade 59 ff Custom ade 60 Custom ade 61 ff ff ff ff ff Custom ade 62 Custom ade 63 m ff ff ff ff 64 Custom ade Custom ade 65 FF Port diameter 1/8 1/4 3/8 1/2 3/4 1 DE 17.2 21.5 25.5
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationThe company 4. CM Series Engine Control Panel 6 CM 40 Series CM 20/30 Series CM 2A/3A Series CM 02 Series CM 60 Series
ISO 9001:2008 V05EN Index The company 4 CM Series Engine Control Panel 6 CM 40 Series CM 20/30 Series CM 2A/3A Series CM 02 Series CM 60 Series RA Series DIgital Instruments 19 RA10 Thermocouples reader
More informationTECHNICAL SPECIFICATIONS. Measuring Accuracy ±2% of full scale. Repeatability ±0.5% of full scale
TECHNICAL SPECIFICATIONS Measuring Accuracy ±2% of full scale Repeatability ±0.5% of full scale Flow Measuring Range 1/2 porting: 0.5 15 GPM (2 60 LPM) 3/4 1 porting: 1.5 50 GPM (60 200 LPM) Turn Down
More informationMAGNET FLOAT LEVEL TRANSMITTER
MAGNET FOAT EVE TANSMITTE http: //www.fine-tek.com e-mail: info@fine-tek.com Tel: 886--696789 Fax: 886--68668 PINCIPE The "Magnet Float evel Transmitter" is composed of the float and sensing rod (shown
More informationGas Turbine Flowmeters Robust performance and maximized availability across a range of applications
Gas Turbine Flowmeters Robust performance and maximized availability across a range of applications Content Gas Turbine Flowmeters Introduction................................................................................3
More information