The company 4. CM Series Engine Control Panel 6 CM 40 Series CM 20/30 Series CM 2A/3A Series CM 02 Series CM 60 Series
|
|
- Willis Thomas
- 5 years ago
- Views:
Transcription
1
2 ISO 9001:2008 V05EN
3 Index The company 4 CM Series Engine Control Panel 6 CM 40 Series CM 20/30 Series CM 2A/3A Series CM 02 Series CM 60 Series RA Series DIgital Instruments 19 RA10 Thermocouples reader RA20 RPM Counter/working hours counter RA40 Pressure and temperature reader Wiper Control Units 30 Single wiper CT2NX Wiper Controller Units 32 CT10 Series CT20 Series Intelligent Wiper Switch 36 Single wiper CT41 Series Single wiper CT41P Series Two wiperct42 Series Two wiper CT42P Series Three wiper CT43P Series Modular Wipers Control System 46 CTMOD Series Accessories 48
4 the company
5 The company Pine s.r.l. PINE S.r.l. was founded in 1993 introducing the first microprocessor control integrated system for marine diesel engine. Our primary target is to supply products designed for nautical (military, professional and leisure) and industrial applications able to satisfy reliability and quality requirements expected. Technologically advanced solutions, wide experience and sector know-how, allow to design marine application systems, and on request, in accordance with Marine Register specifications. Such prerogatives give the possibility to get over a deeprooted wariness about electronics diffused everywhere (from engine manufactures to final customers), entering in a market ruled only by analogic instrumentation. Thanks to a high level service, reliability, quality and customer service, PINE sells products in the world wide market. An assistance service based on local Companies permits to help customer on the first installation and in the after market. 5
6 CM Series Engine Control Panels
7 Engine Control Panels General features Bright led display visualization Variable luminous intensity High precision readings Alarms management Inputs adaptable to any kind of transducer Two or more panels can be connected together in a Master- Slave configuration Polarity inversion and wrong cabling protections. Complete Supplied with starting switch, fuse, buzzer and engine push-stop button. Microprocessor based A wide technology puts apart common analog panels. Reliable Collision and vibration resistant, insensible to humidity or sudden change of temperature, panel is protected by a polyester mounted on an aluminium support. Precise Greater precision compared with the analog instrumentation. Flexible Customizable configuration to fit the panel for any kind of engine, always giving an effective protection. 7
8 O OW 98 O N DOWN 185 8
9 Engine Control Panel CM 40 Series Description Digital control panel based on microprocessor, fit for low power engine where at least main readings have to be monitored. Ideal where space is one of the most important needs. Power supply 12 Vcc (CM41) 24 Vcc (CM42) 12 Vcc (CM41) 24 Vcc (CM42) Visualization 4 led displayed measurements in a single row: RPM Working hours Battery voltage Water temperature 5 warning lamps for signaling and alarms. Variable luminous intensity. Size 185 x 98mm, 100 mm depth On request Automatic Stop enabled/disabled by a panel front switch Pre-heating management Oil pressure or Fuel level instead of Water temperature Remote silencing input Smart painted metal box, fixed by four anti-vibrants. 12V version (CM41) 24V version (CM42) Power supply 12 Vcc min 6 V, max 15 V 24Vcc min 10 V, max 35 V Power Consumption Less than 4 W Protections Polarity inversion, Battery disconnecting extravoltage (not repetitive) Working temperature -10 C/+60 C Storage temperature -30 C/+70 C Visualization One-row bright led display High Water Temperature Low Oil Pressure Warning lamps Alternator Preheating Low Battery Acoustic indication Buzzer Inputs 2 analogs and 6 digitals RPM measurement Alternator W contact Water temp. measurement Veglia 40/120 C CUTTING EDGE DEPTH: 100mm 9
10 P N P OP N N W N O U DOWN UP CUTTING EDGE DEPTH : 100mm 10
11 Engine Control Panel CM 20/30 Series Description Digital panel based on microprocessor, it is the best seller of the whole CM series family It replaces the classical analog panel reducing space trouble to the minimum Inputs compatible with the most common commercial transducers Acoustic alarms silenced by a panel front key. Power supply 12 Vcc (CM20) Universal 12 / 24 Vcc (CM30) Visualization 6 measurements led displayed in three rows: RPM Working hours Water temperature Fuel level and reserve lamp Engine Oil pressure Battery voltage 7 warning lamps for signaling and alarms Variable luminous intensity Size 246 x 138 mm, 100 mm depth. On request Automatic stop enabled/disable by a panel front switch Acoustic alarm remote repeating Remote silencing input Pre-heating management related to the engine water temperature Two or more panels connected together for a Multi-Station control Electronic control unit can be supplied with or without aluminium front panel Smart painted metal box, fixed by four anti-vibrants. Applications Fit for mid-power engine It represents the ideal solution when all engine basic readings have to be monitored Panels can be placed on the ship pilot bridge, on flying-bridge or engine room. Power supply CM20 12 Vcc (min 6 V, max 15 V) CM30 12/24 Vcc (min 10 V, max 30 V) Power Consumption Less than 6 W Protections Polarity inversion, Battery disconnecting extravoltage (not repetitive) Working temperature -10 C/+60 C Storage temperature -30 C/+70 C Visualization 3 rows bright led display and variable luminous intensity High Water Temperature (ATA) Low Oil Pressure (BPO) Alternator (D+) Warning lamp Preheating Low Battery Alarm1 (AL1) Alarm2 (AL2 CM30 only) Acoustic indication Buzzer 0 C 15 seconds 20 C 10 seconds 40 C 7 seconds Preheating time > 50 C 0 seconds (ref. to engine water temperature) seconds without transducer or negative temperature Transdoucer type Engine revolution Water (oil) temperature Oil pressure Level Alternator W contact Pick-up on crown wheel (by Pine adaptor) Proximity switch (on request) VDO C Veglia C Jaeger C (on request) 0 20 ma or 4-20 ma (on request) VDO 0 10 bar VDO 0 25 bar (on request) Veglia 0 8 bar Jaeger 0 10 bar (on request) Jaeger 0 25 bar (on request) 0-20 ma or 4-20 ma (on request) Resistor type 11
12 Electronic unit only 12
13 Engine Control Panel CM 2A/3A Series Description Microprocessor based programmable digital control panel It replaces the classical analog panel reducing space trouble to the minimum. User adjustable pre-alarm an alarm thresholds for each reading. Automatic stop also available. Power supply 12 Vcc (CM2A). Universal 12 / 24 Vcc (CM3A) Visualization 6 led displayed measurements in three rows: RPM Working hours Maintenance / Oil change timer Management Water temperature Fuel Level and reserve lamp Engine Oil pressure Battery voltage 7 warning lamps for signaling and alarms Variable luminous intensity. Size 246 x 138 mm, 100mm depth On request Acoustic alarm remote repeating Remote silencing input Pre-heating management related to the engine water temperature Two or more panels connected together for a Multi-Station control Electronic control unit can be supplied with or without aluminium front panel Smart painted metal box, fixed by four anti-vibrants. Applications Fit for mid-power engine It represents the ideal solution when all engine basic readings have to be monitored. Panels can be placed on the ship pilot bridge, on flying bridge or engine room. Power supply CM2A 12 Vcc (min 6 V, max 15 V) CM3A 12/24 Vcc (min 10 V, max 30 V) Power Consumption Less than 6 W Protections Polarity inversion, Battery disconnecting extravoltage (not repetitive) Working temperature -10 C/+60 C Storage temperature -30 C/+70 C Visualization 3 rows bright led display and variable luminous intensity High Water Temperature (ATA) Low Oil Pressure (BPO) Warning lamp Alternator (D+) Preheating Low Battery Alarm1 (AL1 CM3A only) Acoustic indication Buzzer 0 C 15 seconds 20 C 10 seconds 40 C 7 seconds Preheating time > 50 C 0 seconds (ref. to engine water temperature) seconds without transducer or negative temperature Transdoucer type Engine revolution Water (oil) temperature Oil pressure Level Alternator W contact Pick-up on crown wheel Proximity switch (on request) VDO C Veglia C Jaeger C (on request) Caterpillar (on request) 0 20 ma or 4-20 ma (on request) VDO 0 2 bar VDO 0 5 bar VDO 0 10 bar VDO 0 25 bar Veglia 0 8 bar Jaeger 0 10 bar (on request) Jaeger 0 25 bar (on request) 0-20 ma or 4-20 ma (on request) Resistor type 13
14 14 DOWN DOWN OW O N O O N O O W O O DEPTH : 100mm CUTTING EDGE
15 Engine Control Panel CM 02 Series Description Totally programmable digital control panel based on microprocessor User adjustable pre-alarm and alarm thresholds for each input Automatic Stop enabled/disabled by a panel front switch. Power supply Universal 12 / 24 Vcc. Visualization 14 measurements led displayed in six rows: RPM Working hours 8 analog readings Maintenance / Oil change timer management One or two exhaust gas temperatures 10 warning lamps for signalling and alarms Variable luminous intensity Size 388 x 136 mm, 100 mm depth On request Acoustic alarm remote repeating Remote silencing input Smart painted metal box, fixed by four anti-vibrants. Power supply Universal 12/24 Vcc (min 10 V, max 30 V) Power Consumption Protections Working temperature Storage temperature Visualization Warning lamp Acoustic indication Thermocouple Preheating time Less than 10 W Against polarity inversion and battery disconnecting extravoltage (not repetitive) -10 C/+60 C -30 C/+80 C 6 rows bright led display and variable luminous intensity Left panels 3 alarms Al1 Al2 Al3 Right panel 7 alarms High Water Temperature (ATA) Low Oil Pressure (BPO) Alternator (D+) Maintenance/Oil change Preheating Low Battery Al Buzzer K Type (Chrome Aluminium) J Type (Iron Constantan) 0 C 15 seconds 20 C 10 seconds 40 C 7 seconds > 50 C 0 seconds seconds without transducer or negative temperature Engine revolution Alternator W contact Pick-up on crown wheel Proximity switch (on request) Transdoucer type Water (oil) temperature Oil pressure Level VDO C Veglia C Jaeger C (on request) Caterpillar (on request) 0 20 ma or 4-20 ma (on request) VDO 0 2 bar VDO 0 5 bar VDO 0 10 bar VDO 0 25 bar Veglia 0 8 bar Jaeger 0 10 bar (on request) Jaeger 0 25 bar (on request) Murphy 0 25 bar (on request) 0-20 ma or 4-20 ma (on request) Resistor type Current output type 15
16 16
17 Engine Control Panel CM 60 Series Features CAN BUS SAE J1939 compliance Modular system Alarm repeater Reader and alarm annunciator Made in Italy CM 61 Small and compact Save dash board space CM 62 Low cost engine control panel CM 63 All the features to better control the engine Technical features Power Supply Nominal voltage: from 12 / 24 VDC Range: min 10 VDC max 35 VDC Power Consumption (no load) Less than 5 W / 10 W Protections Polarity inversion, Battery disconnecting extravoltage (not repetitive). Temperature WORKING TEMPERATURE C STORAGE TEMPERATURE C Relative Humidity Max 95 % Visualization TRANSFLECTIVE LCD display 128 x 64 dots back light, sun light readable Can Bus Interface RS485 Interface Data Recording Signallings Engine Revolutions Input Analogue Inputs Messages SAE J1939 compatible Connection to other panels - repeaters All the engine events / alarms download on a PC WARNING LAMP ACOUSTIC SIGNALING 1 input from RPM sender 1 input from CAN BUS 10 analogue measures System ready warning lamp Up to 16 warning lamps Internal buzzer SENDERS: Alternator W Or - Pnp proximity sensor Or - Pick-up on crown wheel 5 ANALOGUE INPUTS 1 10 Input from CAN BUS 4 alarm set points Alarm Inputs 16 alarm inputs 8 from external connections - N.C. or N.O. contacts 1-16 from CAN BUS / Serial interface RS485 SYSTEM READY Contact closed if READY OUTPUTS ALTERNATOR EXCITATION 5 OUTPUTS RELAY SIGNAL FOR EXTERNAL TACH Excitation current about 200 ma PROTECTED by internal self-resettable fuse (PTC). Settable for any RPM gauge / tachometer 17
18 RA Series D i g i t a l Instruments
19 RA Series Digital Instrument Microprocessor based Designed to represent the ideal solution in marine applications. Compact Many readings in a single row led display, visualized by automatic or manual swapping. Versatile Instruments are compatible with either marine applications transducers or the industrial ones. General features Readings visualization in a single row bright led display Variable luminous intensity High precision readings User adjustable thresholds alarm Relay output pin for each alarm External siren output Universal power supply 12 / 24 Vcc. Polarity inversion and wrong cabling protections Size 48 x 96 mm (DIN 43700) 120 mm depth. 19
20 RAseries A1 A2 TYPE SET 48 B1 B2 MODE SEL AB RPM C AB HOUR C 96 20
21 RA Series RA 10 Thermocouples Reader Applications Fit for systems where high temperatures have to be monitored, such as the exhaust gas ones. Alarms The User adjustable alarm thresholds indicate anomalies or over-temperature situations for fast maintenance intervention. Precise Provided with a 12 bit A/D converter, with adjustable offset and slope (gain) for high precision readings. Visualization Single row bright led display with variable luminous intensity. One temperature (RA11) or two temperature with automatic or manual swapping (RA12). Temperature processing Instruments can be set up to work as thermostats. Insensible to Wiring electrical dispersion caused by humidity or condensate. Power supply 12/24 V d.c. (from 10 to 30 Volt d.c.) Working temperature From -5 up to 60 C Thermocouple K Type (Chrome - Aluminium) J Type (Iron - Constantan) Range of measure (K) From 0 to 990 C Range of measure (J) From 0 to 750 C Accuracy +/-2 C for both thermocouple types Resolution 1 C Available alarms Adjustable A1, A2 and B1, B2 thresholds, led signaling, buzzer, external buzzer repeating External siren output SPOT type, Imax = 2 A res. / Vmax = 50 V Plastic box DIN x 96.0 mm - total depth: mm Cutting edge 45.0 x 91.0 mm 91 CUTTING EDGE 45 DEPTH : 120mm 21
22 48 RA series A1 A2 TYPE B1 B2 MODE AB RPM HOUR SET SEL
23 RA Series RA 20 RPM Counter/Working Hours Counter Applications Fit for systems where high precision engine revolutions reading is required. Input signal is provided by alternator W contact or comes from the most common transducers such as magnetic pick-up on crowned wheel or PNP and NPN proximity switches. Set-up RPM calibration procedure is as simple as intuitive. The same is for the programmation of all working parameters. Visualization Single row bright led display with variable luminous intensity: RPM, working hours. User adjustable alarm thresholds, maintenance or oil change timer management. Low RPM Instrument can be set to read very low RPM, displayed with a decimal digit also. Power supply 12/24 V d.c. (from 10 to 30 Volt d.c.) Working temperature From -5 up to 60 C Range of measure From 1 up to 50,000 RPM on 4 digits Accuracy <1 at 6,000 RPM ( ra parameter set to 1) Resolution 1 or 10 RPM, depending on ris parameter in SEt1 Max input frequency 5 KHz for PNP an NPN switch 10 KHz for W 20 KHz for magnetic pick-up Available alarms User adjustable A1 and A2 thresholds, led signaling, buzzer, A1 alarm, or buzzer repeating (A2 disabled) Relay output Spot type Imax = 2 A res. / Vmax = 50 V Plastic box DIN x 96.0 mm total depth: mm Cutting edge 45.0 x 91.0 mm 91 CUTTING EDGE 45 DEPTH : 120mm 23
24 RAseries A1 A2 TYPE SET 48 B1 B2 MODE SEL AB C BAR 96 24
25 RA Series RA 40 Pressure and Temperature Reader Applications Fit for systems where high precision readings have to be monitored, such as temperatures or engine pressure. Input signals can come from any kind of marine transducer. RA40 is also compatible with 4-20 ma standard. Alarm thresholds Two adjustable alarm thresholds can be set for every reading. Alarms remote repeating is also available. Visualization Two pressures or two temperatures, or one temperatures, or one temperatures and one pressure. Temperature and pressure processing Instrument can be set up to work as thermostat and pressure switch. Power supply 12/24 V d.c. (from 10 to 30 Volt d.c.) Working temperature From -5 up to 60 C Available alarms for each reading User adjustable A1 and A2 thresholds, led signaling, buzzer, A1 alarm, or buzzer repeating (A2 disabled) External siren output Spot type Imax = 2 A res. / Vmax = 50 V Scale proportional regulation Adjustable by set-up programmation for both readings up to +/ -25% of default value Plastic box DIN x 96.0 mm total depth: mm Cutting edge 45.0 x 91.0 mm 91 CUTTING EDGE 45 DEPTH : 120mm 25
26 Wiper Control Units ,
27 Descriptions CT62 is a very low-cost control system fit for two wipers. It includes all functions necessary for windscreen cleaning. It can be installed in few minutes and it is provided with user-friendly commands. Wiper Control Unit CT2 NX Series M1 M2 M3 M4 M5 applications Fit for single or double speed motors provided with parking switch. Functions 4 intermittent levels one or two speeds syncronized brushes at any mode automatic washing program leds signalling working functions CT621 Easy to use All functions performed through ON-OFF-ON push button. Easy to install Plug-in connector or fast-on connections In-circuit fuse Supplied with mounting screws Power supply 12 V 24 V Motor power Up to 200 W Up to 200 Less Wthan 70 ma at 10 V STAND BY CURRENT Power consumption Less than 6 W Less than Less 6 Wthan 40 ma at 30V Protection Polarity inversion PROTECTION Polarity inversion POWER SUPPLY Polarity inversion From 10 to 30 V dc 1 command button 1 command button Inputs 2 parking switch MOTOR 2 POWERFrom 2 to parking switch Up 5 parking to 150 W at switches 12 V Up to 250 INPUTS (open in park 2 Slow-speed brush 2 Slow-speed brush Less position) than 70 ma at 10 V STAND BY CURRENT 2 High-speed brush 2 High-speed brush Less than 40 ma at 30V Outputs 1 Signalling led PROTECTION 1 Signalling led Polarity inversion 1 Washing pump 1 Washing I max pump = 12 A OUTPUTS From 2 to 5 parking switches Size 125 x 104 x 30 mm INPUTS125 x 104 washing x 30 mmpump (open in park position) OUTPUTS M1 M2 M3 M4 M5 POWER SUPPLY From 10 to 30 V dc CT622 MOTOR POWER Up to 150 W at 12 V Up to 250 W at 2 INDICATIONS CONTROL PANEL SIZE RELAY BOX SIZE INDICATIONS CONTROL PANEL SIZE RELAY BOX SIZE From 2 to 5 motors - slow/high speed I max = 1 A 98 x 100 mm From 2 to 5 motors - slow/high I max = 12 A washing pump I max = 1 A active functions and timing regulation parking switches damaged 191 x 109 X 40 mm active functions and timing regu parking switches damaged 98 x 100 mm 191 x 109 X 40 mm WIPER CONTROLLER WIPER CONTROLLER ON OFF WASH ON OFF WASH CUTTING EDGE CUTTING EDGE CT series CT series DEPTH: 75mmDEPTH: 75mm 27
28 M1 28 M2 M3 M4 M5
29 Wiper Controller Unit CT10 Series Coordinate The wiper movements synchronizing brushes, having the same harmonious effect you get in cars. Visualize Selected intermittent level, motors state, low washing liquid level, parking switches damaged. salve Your windscreen problems in a very easy way. Drive Wipers all together (general ON/OFF) or one by one (single ON/OFF for each wiper) Automatic washing program Versions From 1 up to 5 wipers in a single electronic unit, 12 or 24 Vcc power supply. Fit for Any kind of motors. Motors are driven by a relay-box connected to the electronic unit by a simple multipole cable. Strong A polyester frontal mounted on a 3 mm aluminium protects the unit against water sprinkle or dust. Power supply Driver Power consumption Protection Inputs Outputs Indications Size 12 V cc, 24 V cc 12 V motor, 16 A 24 V motor, 8 A Less than 4 W Polarity inversion Low windscreen liquid level Automatic parking switches Wiper motor (from 1 up to 5) Washing pump Active functions and timing regulation Low windscreen liquid level Parking switches damaged 98 x 100 mm WIPER CONTROLLER CUTTING EDGE ON OFF WASH CTseries DEPTH: 75mm 29
30 M1 M2 M3 M4 M5 30
31 Wiper Controller Unit CT20 Series Coordinate The wiper movements synchronizing brushes, having the same harmonious effect you get in cars. Visualize Selected intermittent level, motors state, low washing liquid level, parking switches damage. salve Your windscreen problems in a very easy way. 3 intermittent levels two speeds synchronized brushes at any mode patented automatic washing program indicator leds for active function Drive Wipers all together (general ON/OFF) or one by one (single ON/OFF for each wiper) Automatic washing program. Versions From 1 up to 5 wipers in a single electronic unit, 12 or 24 Vcc power supply. Fit for Any kind of motors. Motors are driven by a relay-box connected to the electronic unit by a simple multipole cable. Strong A polyester frontal mounted on a 3 mm aluminium protects the unit against water sprinkle or dust. Power supply Driver Power consumption Protection Inputs Outputs Indications Size 12 V cc, 24 V cc 12 V motor, 16 A 24 V motor, 8 A Less than 4 W Polarity inversion Automatic parking switches Wiper motor (from 1 up to 5) Washing pump Active functions and timing regulation Low windscreen liquid level Parking switches damaged 98 x 100 mm WIPER CONTROLLER CUTTING EDGE ON OFF WASH CTseries DEPTH: 75mm 31
32 Intelligent Wiper Switch
33 Single Wiper Switch CT41 Series Applications CT41 replace up to two standard switches. Suited for low cost single or double speed motors provided with parking switch. Easy to use Buttons to increase / decrease speed and intermittent time ON/OFF button Each function is displayed by a led bar. Description CT41 is a very low-cost control switch for one wiper. It includes all functions needed for windscreen cleaning. It is user friendly and it can be installed in few minutes. Functions Single wiper selection 3 intermittent levels one or two speed motor brake automatic washing program indicator leds for active function Easy to install No need of mounting screws Plug-in connector. CT41 Power supply V DC Motor power Up to 50 W at Up to 70 W at Power consumption Less than 2 W Protection Polarity inversion Inputs Parking switch Outputs Slow speed High speed 1 Washing pump Size 49 x 24,5 x 91 mm without female connector ,5 24,5 33
34 ,5 24,5 34
35 Single Wiper Switch Hight Current CT41P Series Applications CT41P replace up to two standard switches. Suited for single or double speed motors provided with parking switch. Easy to use Buttons to increase / decrease speed and intermittent time ON/OFF button Each function is displayed by a led bar. Description CT41P is a high-power low-cost control switch for one wiper. It includes all functions needed for windscreen cleaning. It is user friendly and it can be installed in few minutes. Functions Single wiper selection 3 intermittent levels one or two speed motor brake automatic washing program indicator leds for active function dimmer input Easy to install Plug-in connector Fast-on contacts for motor connections. CT41P Power supply V DC Motor power Up to 250 W at 12 V Up to 350 W at 24 V Power consumption Less than 2 W Protection Polarity inversion Inputs Parking switch Dimmer Outputs Slow speed High speed Washing pump Size 49 x 24,5 x 91 mm without female connector Relay box size 150 x 90 x 40 mm 35
36 ,5 24,5 36
37 Two Wiper Control Switch CT42 Series Applications CT42 replace up to three standard switches. Suited for low cost single or double speed motors provided with parking switch. Easy to use Buttons to increase / decrease speed and intermittent time ON/OFF button for single or both wipers Each function is displayed by a led bar Description CT42 is a very low-cost control switch for two wipers. It includes all functions needed for windscreen cleaning. It is user friendly and it can be installed in few minutes. Functions single wiper selection synchronized brushes at any mode-patented 3 intermittent levels one or two speed motor brake automatic washing program indicator leds for active function Easy to install No need of mounting screws Plug-in connector. CT42 Power supply V DC Motor power Up to 50 W at 12 V Up to 70 W at 24 V Power consumption Less than 2 W Protection Polarity inversion Inputs 2 parking switch Outputs Size Slow speed right motor Slow speed left motor 1 Washing pump 49 x 24,5 x 91 mm without female connector High speed right motor High speed left motor 37
38 38
39 Two Wiper Control Switch Hight Current CT42P Series Applications CT42P replace up to three standard switches. Suited for single or double speed motors provided with parking switch. Easy to use Buttons to increase / decrease speed and intermittent time ON/OFF button for single or both wipers Each function is displayed by a led bar Description CT42P is high-power low-cost control switch for two wipers. It includes all functions needed for windscreen cleaning. It is user friendly and it can be installed in few minutes. Functions Single wiper selection synchronized brushes at any mode - patented 3 intermittent levels one or two speed motor brake automatic washing program indicator leds for active function dimmer input Easy to install Plug-in connector Fast-on contacts for motor connections. CT42P Power supply V DC Motor power Up to 250 W at 12 V Up to 350 W at 24 V Power consumption Less than 2 W Protection Polarity inversion Inputs 2 parking switch Dimmer Outputs Size Relay box size Slow speed right motor Slow speed left motor Washing pump 49 x 24,5 x 91 mm without female connector 150 x 90 x 40 mm High speed right motor High speed left motor ,5 24,5 39
40 40
41 Three Wiper Control Switch Hight Current CT43P Series Applications CT43P replace up to four standard switches. Suited for single or double speed motors provided with parking switch. Easy to use Buttons to increase / decrease speed and intermittent time General ON/OFF button Single wiper ON/OFF button Each function is displayed by a led bar Description CT43P is high-power low-cost control switch for three wipers. It includes all functions needed for windscreen cleaning. It is user friendly and it can be installed in few minutes. Functions single wiper ON/OFF pushbotton synchronized brushes at any mode - patented 3 intermittent levels one or two speed motor brake automatic washing program indicator leds for active function dimmer input Easy to install Plug-in connector Fast-on contacts for motor connections. CT43P Power supply V DC Motor power Up to 250 W at 12 V Up to 350 W at 24 V Power consumption Less than 2 W Protection Polarity inversion Inputs 3 parking switches Dimmer input Outputs Slow speed and high speed each motor Washing pump Switch size 49 x 24,5 x 91 mm without female connector Relay box size 191 x 110 x 40 mm ,5 24,5 41
42 Modular wipers 21 36,5 Control System 49 24,5
43 Modular Wiper Control System CTMOD Series Applications CTMOD replace the standard switches. Suited for single or double speed motors provided with parking switch. Easy to use Buttons to increase / decrease speed and intermittent time General ON/OFF button Single wiper ON/OFF button Group ON/OFF pushbutton on request Each function is displayed by a led bar Description CTMOD is a high-power low-cost control system for any number of wipers. It includes all functions needed for windscreen cleaning. It is user friendly and it can be installed in few minutes. Functions single wiper ON/OFF pushbutton group ON/OFF pushbutton on request synchronized brushes at any mode-patented 3 (or more) intermittent levels one or two speed motor brake automatic washing program indicator leds for active function dimmer input Easy to install Plug-in connector for network connection Fast-on contacts for motor connections Can bus based Power supply V DC Motor power Up to 250 W at 12 V Up to 350 W at 24 V Power consumption Less than 2 W Protection Polarity inversion Inputs 3 parking switches Dimmer input Outputs Slow speed and high speed each motor Washing pump Switch size 49 x 24,5 x 91 mm without female connector Relay box size 191 x 110 x 40 mm 43
44 Accessories
45 Accessories 1_Panel starting switches Starting switch with starting lock Starting switch without starting lock Starting switch with starting lock and pre-heating 2_Front panel accessories Covered switches Stop push-buttons Fuses and fuse blocks SR12 relay board Relay mini-board to drive external siren 5_Cabling and extension wire connectors ILME 16 / 24 poles AMP17 / AMP23 16 poles DEUTSCH 21 poles 3_Acoustic signaling Front panel 24 V buzzer 24 V siren 6_Thermal transducers K type thermocouple 18MA, 12MA and ¼ GAS connections 4_Adapter and relay miniboard Magnetic pick-up adapter 7_Engine revolution reader Transducers Magnetic pick-up d. 16x1.5 Amplified proximity switch C 8_Industrial transducer INT42VD012 kit 0-10 bar INT42VD025 kit bar 9_Extension wires on request One to one connection Y connection for Master-Slave configuration 10_Engine Box Supplied with any kind of connector Supplied with anti-vibrant
SPREADER SYSTEM. Proportional three function. 1. Features and Specifications. User Manual 12 INPUTS 12 OUTPUTS CONNECTIVITY MAIN FEATURES
User Manual SPREADER SYSTEM Proportional three function 12 INPUTS 3 interrupt digital inputs. 3 digital inputs for engine control (alternator, accelerator, oil alarm). 1 digital input for tachometer (squared,
More informationContinental Hydraulics Installation Manual CEM-AA-A
Continental Hydraulics Installation Manual CEM-AA-A Description: This power amplifier drives either single or dual solenoid proportional valve coils up to 2.6A. It is suitable to control current to proportional
More informationHGM1750 Genset Security Module USER MANUAL Smartgen Technology
HGM1750 Genset Security Module USER MANUAL Smartgen Technology CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 5 3. SPECIFICATION... 7 4. OPERATION... 8 5. PROTECTION... 9 6. PARAMETER RANGE
More informationcontrol systems Made in Italy Integrated systems for the web tension regulation
control systems Integrated systems for the web tension regulation We know that producing quality laminates require very high web tension control. For this reason we provide a very wide range of integrated
More informationTTT802 Gearshift Controller, Part # R1N-S (Standard), -P (Paddleshift)
First, Sign and Date Bln 2009-03-9 Updated, Sign and Date Bln 200-04-29 (0) User Manual TTT802 Gearshift Controller Firmware for R--N-2- TTT802 Gearshift Controller, Part # 2-620-9-RN-S (Standard), -P
More informationWhad 0.8, 1, 1.5 kva. Manuel d installation Installation manual. Part. LE05733AA-07/12-01 GF
Manuel d installation Installation manual Part. LE05733AA-07/12-01 GF Index 1 Introduction 18 2 Conditions for use 19 3 Installation 20 4 Visual and acoustic warning signals 22 5 ups diagnostic software
More informationRVS-DN Digital Reduced Voltage Motor Starter
RVS-DN Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
More informationTE2010-GE Instructions manual
TE2010-GE Instructions manual Hardware: 3.1-4.0 Software: 3.7 PREFACE Thanking you for preference, TECNOELETTRA SRL hopes that the use of this equipment could be a reason of satisfaction. This manual is
More informationHGM1780. Automatic Genset Controller USER MANUAL. Smartgen Technology
HGM1780 Automatic Genset Controller USER MANUAL Smartgen Technology Smartgen Technology Co., Ltd No. 28 Jinsuo Road Zhengzhou Henan Province P. R. China Tel: 0086-371-67988888/67981888 0086-371-67991553/67992951
More informationDKG-109 AUTOMATIC MAINS FAILURE UNIT
Tel: +90-216-466 84 60 Fax: +90-216 364 65 65 datakom@datakom.com.tr http://www.datakom.com.tr DKG-109 AUTOMATIC MAINS FAILURE UNIT FEATURES Automatic mains failure Engine control Generator protection
More informationICON 2 1. FEATURES AND CHARACTEIRICS
ICON 2 1. FEATURES AND CHARACTEIRICS High end Micro-controller(DSP) technology Wide range of auxiliary supply: 7V to 45Vdc. Low power Consumption : 200 ma @ 12 V DC. Alphanumeric 16X4 or 16X2 LCD display
More informationECONOMISER SERIES E2T USER MANUAL
TURBO S.R.L. Electronic Control Systems for Dust Collectors e-mail: info@turbocontrols.it web: www.turbocontrols.it TEL. ++39 (0)362 574024 FAX ++39 (0)362 574092 ECONOMISER SERIES E2T USER MANUAL 24/06/2014
More informationEM DC Multi-Function DC Energy Meter
Analogue Meters With Moving - Iron Movement EM DC Compact DC Energy Meter Ziegler EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor
More informationHGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic
HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 4 3. SPECIFICATIONS... 5 4. OPERATION... 6 5. PROTECTION...
More informationObserve all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.
Introduction OPERATING INSTRUCTIONS: MCD REMOTE OPERATOR Order Codes: 175G94 (for MCD 2) 175G361 + 175G9 (for MCD 5) 175G361 (for MCD 3) 1. Introduction 1.1. Important User Information Observe all necessary
More informationFire Fighting Diesel Pump Control Panel in Compliance with EN Standard User Manual
Fire Fighting Diesel Pump Control Panel in Compliance with EN 12845 Standard User Manual Electronic Control Panel Display Panel door-lock Control Buttons Siren Figure 1. Diesel Control Panel - External
More informationLow voltage AC drives
General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for
More informationTechnical Specifications. Sentinel PRO 700 VA up to 3000 VA 1000 VA ER-2200 VA ER-3300 VA ER
Technical Specifications Sentinel PRO 700 VA up to 3000 VA 1000 VA ER-2200 VA ER-3300 VA ER Sentinel PRO CONTENTS 1. GENERAL DESCRIPTION... 2 1.1. Main features of the UPS unit... 3 1.2. Standard Versions...
More informationPowerView PV380-R2 Mechanical Configuration
PowerView PV380-R2 Mechanical Configuration Operations Manual *Products covered in this document comply with European Council electromagnetic compatibility directive 2004/108/EC and electrical safety directive
More informationHGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION...
CONTENT 1. SUMMARY...4 2. PERFORMANCE AND CHARACTERISTICS...4 3. SPECIFICATION...5 4. OPERATION...6 4.1. DISPLAY PANEL...6 4.2. LCD ICON INSTRUCTION...7 4.3. DISPLAY INSTRUCTIONS...7 4.4. DISPLAY DESCRIPTION...8
More informationMaxPak Plus Analog DC V S Drive
Three-Phase 3-600 HP non-regenerative and 5-150 HP regenerative drives Designed to accommodate a wide range of industrial requirements, the DC V S Drive has been widely applied worldwide. Selected ratings
More informationTechnical Datasheet. Compact DC Energy Meter. Multi-Function DC Energy Meter
Preliminary Datasheet Technical Datasheet Compact DC Energy Meter RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control
More informationDKG-215 MANUAL AND REMOTE START UNIT
DKG-215 MANUAL AND REMOTE START UNIT FEATURES Manual and remote starting and stopping Zero power consumption at rest Engine control mode available Generator protection Built in alarms and warnings 1 phase
More information2100 Turbine Flow Sensor
200 Turbine Flow Sensor Description Engineered specifically for small pipe diameter applications, the Signet 200 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3
More informationFP-100 Fuel Pressure and Ammeter Indicator Page 1 of 16. All specification subject to change Aerospace Logic Inc.
Page 1 of 16 All specification subject to change 2002-2003 FP-100 Operations and Installation Manual This manual is certified for use with instrument serial number ASL000000 Use of this manual with any
More information2D-1. Double Driver Wiper System. Presenting the latest in single-motor, double-driver wiper technology. ,Ff- PANTOGRAPH
2D-1 Double Driver Wiper System PANTOGRAPH Presenting the latest in single-motor, double-driver wiper technology AM Equipment's 2D Wiper System is built for superior durability. SAE tested to over 2.1
More informationCruzPro. RPM, Engine Hours, Elapsed Time Gauge RH110. Other CruzPro Products
Other CruzPro Products l Depthsounders/w Keel Offset, Deep/Shallow/Anchor Drag Alarms l PC Based DSP Fishfinder for Windows98, NT, SE,XP, 2000 l Speed/Temperature/Logs l Digital DC Volts Gauge/w Alarms
More informationSSI Technologies - Application Note AT-AN2 Acu-Trac NEMA 4 Liquid Level Sensor Product Overview
Product Description The Acu-Trac NEMA4 liquid level sensor is a noncontact sensor that is a direct replacement for level senders on tanks with depths up to 1.5 meters (59 inches). The NEMA4 liquid level
More informationDKG-317 MANUAL AND REMOTE START UNIT
Tel: +54-11-4629-600 Fax:+54-11-4627-3500 http://www.cramelectro.com DKG-317 MANUAL AND REMOTE START UNIT FEATURES Manual starting and stopping Engine control Generator protection Built in alarms and warnings
More informationExalto Wipercontrol. For 2 to 5 wipers. Cat.no.: Quality Marine Equipment
Exalto Wipercontrol For 2 to 5 wipers Cat.no.: 21021224 21031224 21041224 21051224 Quality arine Equipment Contents 1 General... 3 1.1 Features... 3 1.2 Scope of supply... 3 2 Push button functions...
More informationMB A 12V/24V DC PROGRAMMABLE DUAL BATTERY ISOLATOR
MB-3688 120A 12V/24V DC PROGRAMMABLE DUAL BATTERY ISOLATOR User Manual Warning and Precautions MB-3688 is built with corrosion resistant material and the main electronic assembly is well sealed inside
More informationTECHNICAL DESCRIPTION
Electrical Energy Storage Tester EEST-511-S Semi-Automatic Charge-Discharge Battery Bench 1 channel 50 V / 100A (Ni-CD, Pb, Ni-Mh, Li-ion...) TECHNICAL DESCRIPTION To buy, sell, rent or trade-in this product
More informationCONTROL, PROTECTION AND VISUALIZATION ELECTRONIC MANUAL CEN- TRALITE FOR GENERATING SETS CMD2.0
CONTROL, PROTECTION AND VISUALIZATION ELECTRONIC MANUAL CEN- TRALITE FOR GENERATING SETS CMD2.0 25/10/a Revision 2 Hoja 1 de 30 0. - CONTENTS. 1. DESCRIPTION AND GENERAL CHARACTERISTICS... Page 3 2. INSTALLATION
More informationPKS-FD Servo System
PKS-FD123-01 Servo System FEATURES 24-70VDC of 0.32 Nm Power Ratings up to 100 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6500 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available Position,
More informationAQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2
AQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2 INTRODUCTION The Aquavar Intelligent Pump Controller from utilizes an all new Aquavar platform, and combines it with over 20 years of
More informationAlpha EM DC Multi-Function DC Energy Meter. Technical Datasheet. Compact DC Energy Meter
Alpha EM DC Technical Datasheet Compact DC Energy Meter ALPHA EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target
More informationWiper Switch. For one Exalto H.D. wiper. Cat. no Quality Marine Equipment
Wiper Switch For one Exalto H.D. wiper Cat. no. 210341 Quality Marine Equipment Contents 1 General... 4 1.1 Functions... 5 1.2 General description... 5 1.3 Power supply.....................................................
More informationMains. Great performances. Attractive coloured display. PLC functions inbuilt. Several I/O with possibility of expansion modules
Mains Powerful dual processor-based controller designed to manage production or emergency power plants composed by gensets working in parallel among them and/or with the mains. Available in two versions:
More informationGENERALITIES TECHNICAL FEATURES
GENERALITIES This device is a traditional three-phases battery charger, with a power supply of 230Vac or 400Vac. The battery charger is a WA charge cycle type, which ensures a decrease of the current and
More informationKNC-SRV-FD123-EA-000 Series Servo Driver
FEATURES DESCRIPTION Input Voltage Range From DC24VDC to 70VDC Rated Current is (RMS) 10A 50-200 Watt Power Range Position, Speed, and Torque Control RS232 and Natural Air Cooling MODBUS and CANopen Standard
More informationTechnical Datasheet. Multi-channel support RTC with Data Storage RS485 Output Alarming & Protection Onsite Programmable Load Profile Analysis
Preliminary Datasheet Technical Datasheet Compact DC Energy Meter RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control
More informationProduct Manual. Part Number: MVP-193 Mefi-6 ECU Revision: 1.0
Product Manual Part Number: MVP-193 Mefi-6 ECU Revision: 1.0 Copyright Controls, Inc. P.O. Box 368 Sharon Center, OH 44274 Phone 330.239.4345 Fax 330.239.2845 www.controlsinc.com TABLE OF CONTENTS PRIOR
More informationSSI Technologies Application Note PS-AN7 MediaGauge (Model MG-MD) Digital Pressure Gauge Product Overview
Product Description The MediaGauge MG-MD is a multi-functional digital pressure gauge consisting of a media isolated piezoresistive pressure sensing element, signal conditioning circuitry for temperature
More informationKNC-PKS-FD S-AAK-DKH
KNC-PKS-FD123-02 - Servo System FEATURES 24-70VDC of 90 oz-in Power Ratings up to 200 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6000 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available
More informationDKG-509 AUTOMATIC MAINS FAILURE UNIT
DKG-509 AUTOMATIC MAINS FAILURE UNIT CANBUS AND MPU VERSIONS DESCRIPTION The controller is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. The unit is available
More informationDMT PERFORMING UNDER PRESSURE DMT. Pressure Scanner Features. Applications. Description 1/7
Features User Accessible Memory for Test Configuration Management ±0.05% FS System Accuracy EU Throughput Rates of 500 Hz Auto-Negotiating 10/100 BaseT Ethernet with TCP & UDP Protocol Pressure Ranges
More informationTimeless Instruments MARINE INSTRUMENTS. Premium Marine Instruments. AcquaLink. OceanLink. 1 Marine Instruments AMI Marine Catalogue
Premium Marine Instruments Timeless Instruments With over 50 years of experience, VDO stands as one of the oldest marine suppliers in the industry. This sustained level of success is the product of our
More informationInstallation and Maintenance Instructions. World Leader in Modular Torque Limiters. PTM-4 Load Monitor
World Leader in Modular Torque Limiters Installation and Maintenance Instructions PTM-4 Load Monitor 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail: sales@brunelcorp.com
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationSERIES PR90H PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS REFERENCE PR90H - C C - C. External diameter 58 mm
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationThe measurements module provides the following engine features information:
1. INTRODUCTION The CEM6 control board is a monitoring network signal and monitoring and control generator feeding device. The device consists of 2 different modules: - Visualization module. The visualization
More informationTechnical Specification SENTINEL PRO
Technical Specification SENTINEL PRO Contents 1 GENERAL DESCRIPTION... 3 1.1 Main features of the UPS unit... 4 1.2 Standard Versions... 4 1.3 ER Versions for extended autonomy... 4 2 SENTINEL PRO SERIES
More informationDKG-707 MULTI GENSET PARALLELLING UNIT WITH J1939 INTERFACE
DKG-707 MULTI GENSET PARALLELLING UNIT WITH J1939 INTERFACE STANDARD FEATURES Automatic and manual start Multi genset synchronization (up to 8 gensets) Multi genset load sharing (up to 8 gensets) Both
More informationELECTRICAL PANELS. Chap.
ELECTRICAL PANELS 360 Panel System Electrical Panels 360 Panel System Modular Panels DC Electric Panels AC Electric Panels AC/DC Electric Panels Aber Marine Panels IP 67 Watertight Panels Rotary Switch
More informationElectronic Wiper Control
Exalto B.V. P.O. Box 40 3370 AA Hardinxveld-Giessendam The Netherlands T +31 (0)184 615 800 F +31 (0)184 618 200 E wipers@exalto.com I www.exaltowipers.com Exalto B.V. April 2009 Electronic Wiper Control
More informationRVS-DX Digital Reduced Voltage Motor Starter
RVS-DX Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
More informationAutoControl Pressure Governor
AutoControl Governor OPERATION and INSTALLATION MANUAL MODEL WSD-100: Cummins Electronics Engines-ISB, ISC, ISL, ISM WSD-200: DDEC electronics engines-series 50 and Series 60 WSD-240: DDEC Series 40 engines
More informationLinear-Transducer LMP48 - A
Linear-Transducer LMP48 - A Ref.: K-LMP48-A-1 01020102000306 Advantages _ Compact construction _ Further interfaces availabl _ Measures linear movemen _ housing _ Wear-free detection General Data Supply
More informationWeatherproof Tubular Slip Ring Assembly
Weatherproof Tubular Slip Ring Assembly Model B8-4.3W 8 circuit weatherproof slip ring Compact design Mounts on shafts up to 4.3 [109.2 mm] in diameter Permanently lubricated bearings Rugged stainless
More informationPaddle-wheel flow controller with optical principle for On/Off control
Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor
More informationSINUS PENTA 2T/4T SINUS PENTA 2T/4T
SINUS PENTA 2T/4T SINUS PENTA 2T/4T Technical Highlights One product, 5 integrated functions - IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/F pattern).
More informationUSERS MANUAL MCD REMOTE OPERATOR
USERS MANUAL MCD REMOTE OPERATOR Order Code: 175G9004, 175G3061 Contents Contents Introduction...2 Important User Information...2 General Description...2 Symbols Used in this Manual...2 Installation...3
More informationKNC-SRV-FD123-CA-000 Series Servo Driver
FEATURES DESCRIPTION Input Voltage Range From DC24VDC to 70VDC Rated Current is (RMS) 10A 50-200 Watt Power Range Position, Speed, and Torque Control RS232 and CAN BUS Natural Air Cooling MODBUS and CANopen
More informationINTECH Micro 2300-RTD6
INTECH Micro 2300-RTD6 6 Channel RTD Input Station Overview. The Intech Micro 2300 Series is a system of modular I/O Remote Stations, that add an even lower cost option to Intech s already extensive intelligent
More informationInductive conductivity meter
Inductive conductivity meter Type 8228 can be combined with... Configurable outputs: up to 2 transistor and up to 2 analog 4... 20 ma outputs Removable backlighted display Simulation of process values
More informationPowerful Solutions DHP - Introduction
Powerful Solutions DHP - ntroduction DHP - DC High Power Programmable Supply he DHP Family contains over 140 Tmodels ranging in output power from 2 kw to 30 kw in a single chassis. The 2 kw and 3 kw models
More informationDKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START UNIT WITH PARALLEL TO MAINS AND DUAL GENSET PARALLEL FEATURES
Genset Automation Control Pte Ltd DKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START UNIT WITH PARALLEL TO MAINS AND DUAL GENSET PARALLEL FEATURES FEATURES Automatic mains failure, Remote start operation,
More informationDKG-207 AUTOMATIC MAINS FAILURE AND REMOTE START UNIT
DKG-207 AUTOMATIC MAINS FAILURE AND REMOTE START UNIT FEATURES Automatic mains failure, Engine control, Gas engine support, Generator protection, Built in alarms and warnings, 3 phase mains voltage inputs
More informationSECTION INDEX. Whether the need is for a simple voltmeter or a complex monitoring system, look to Blue Sea Systems for a solution.
88 Metering Solution-Oriented Metering Keeping track of onboard systems is critical to safety and peace of mind. Running low on fuel or not knowing about a failing battery can lead to dangerous situations.
More informationData Sheet Type FF420. Series 420 Specification Flange / Flange. Series 420 Non-Contact Rotary Torque Transducer
Datum Electronics has further extended its standard range of torque transducers to cater for higher rotary speeds and an increased number of torque ranges. The 420 Series torque transducers operate with
More informationDKG-109J AUTOMATIC MAINS FAILURE UNIT
DKG-109J AUTOMATIC MAINS FAILURE UNIT CANBUS VERSION FEATURES True RMS measurements Automatic mains failure ECU control and monitoring through J1939 CAN J1939 ECU warnings displayed as text Various engine
More informationSR8-Plus 2 Phase Step Motor Drive
2 Phase Step Motor Drive User Manual Rev. 1.1 AMP & MOONS Automation Contents 1 Introduction... 3 1.1 Overview...3 1.2 Features...3 1.3 Block diagram...4 2 Mounting the Drive... 4 3 Connections... 5 3.1
More informationGS Series. with new controller SM30
GS Series Sensorpress Booster Systems with new controller SM30 GS Series The GS range of fixed speed booster setsincludes models with 2 to 3 electric service pumps, and an additional jockey pump able to
More informationTimer Relays - Fixed & Adjustable
Solid State Solid State relays are suitable across all applications where reliability is paramount. Unlike conventional relays, Solid State relays use electronics in place of traditional contacts, allowing
More informationFL-100-R (109) Operations and Installation Manual
Page 1 of 23 All specification subject to change 2002-2005 FL-100-R (109) Operations and Installation Manual This manual is certified for use with instrument serial number ASL000000 Use of this manual
More informationSuperstatic 440. Static Heat Meter, Static Cooling Meter. Application
Superstatic 440 Static Heat Meter, Static Cooling Meter Application Design The Superstatic 440 is a static heat or cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,
More informationELIOS 25 DIGITAL CONTROL UNIT WITH LCD DISPLAY FOR THERMAL SOLAR SYSTEMS TDS 006 M00 0SE A
ELIOS 25 DIGITAL CONTROL UNIT WITH LCD DISPLAY FOR THERMAL SOLAR SYSTEMS TDS 006 M00 0SE 012945A0 040906 1 MAIN FEATURES Power supply 230V~ ±10% 50Hz Backlit alphanumeric LCD display Management of 5 output
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More informationCAN Instruments CANcockpit* Ocean Link Accessories. * Only for trained partners
CAN Instruments * Only for trained partners 1.3.1 CANcockpit* 1.3.2 Ocean Link 1.3.3 Accessories CANcockpit* Handle complex requirements with ease. The VDO brand is synonymous with customised solutions
More informationThe Intelligent Valve Sensor. DeviceNet
Product Line * Valve Sensors The Intelligent Valve Sensor Advanced Continuous Sensing Technology Automatic Self-Calibration Valve Position Electronic Sensed Extra Bright LEDs for Valve Position Indicator
More informationMANUAL AUTO START DEEP SEA 7410 CONTROLLER CONTROL PANEL TYPE CM1 ELECTRIC DIAGRAM
MANUAL AUTO START DEEP SEA 7410 CONTROLLER CONTROL PANEL TYPE CM1 MODEL DIMENSIONS (MAX) (mm) CUBICAL (m)3 VOLTAGE CM2 HEIGHT WIDTH DEEP 0.027 THREE PHASE 1 6 AMPERAGE 934 260 191..5 WEIGHT KG KVA ENCLOSURE
More informationDescription 1/8-7.5HP
Description 1/8-7.5HP J1000 In our pursuit to create drives optimized for variable speed needs in compact applications, the J1000 is the solution. This micro-drive is simple and reliable with Yaskawa quality.
More informationABB Component Drives ACS150, 0.5 to 5 Hp
ABB Component Drives ACS150, 0.5 to 5 Hp Technical Catalog BUSINESS PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents Choice 1: Simply contact your local ABB drives sales office
More informationDISTRIBUTORS. n o p q. hdm + multi-pole connection TECHNICAL DATA COMPONENTS
+ multi-pole connection HDMs are the ideal solution for those requiring the unbeatable performance, flexibility and modularity of Multimach valves combined with sturdy mechanics and a high degree of protection
More informationInnovative Controls Inc. SL Series Tank Level Monitor
WATR OAM Innovative Controls Inc. SL Series Tank Level Monitor The decorative mounting bezel is chrome plated to the most stringent SA standards. Both 14 LD and 10 LD master and slave display modules feature
More informationL300P Inverter Specifications
L300P Inverter Specifications Tables for 200V class inverters Note that General Specifications on page 1 9 covers all L300P inverters, followed by footnotes for all specifications tables. Seven 200V models
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationSuperstatic 440. Static Heat- and Cooling Meter. Application
Superstatic 440 Static Heat- and Cooling Meter Application Design The Superstatic 440 is a static heat- and cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,
More informationINSTRUMENTATION & CONTROL
Irrigation Controller.................... 172 Window Controller.................... 174 Water Meter Controller.................. 176 Digital Level Switch.................... 177 Filtration Controller Set..................
More informationINSTRUCTION AND USE MANUAL
CONTROL UNITS FOR ENGINE CONTROL AND PROTECTION TYPE CEP-090 INSTRUCTION AND USE MANUAL It is equipped with display to show the INSTRUMENTS: - hour-meter - fuel level indicator - tachometer - battery voltmeter
More informationTimer Relays - Fixed & Adjustable
Solid State Solid State relays are suitable across all applications where reliability is paramount. Unlike conventional relays, Solid State relays use electronics in place of traditional contacts, allowing
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationTimer Relays - Fixed & Adjustable
Solid State Solid State relays are suitable across all applications where reliability is paramount. Unlike conventional relays, Solid State relays use electronics in place of traditional contacts, allowing
More informationSmartPak Welding Controller WK-MPS-16 Constant Current
SmartPak Welding Controller WK-MPS-16 Constant Current Features Latest state of the art ATMEL 8 bit microprocessor technology Synchronous digital welding control allows absolute precision Up to16 programmers
More informationProducts Tde Macno. User s Manual BRAKING UNIT. Cod. MP00401E00 V_1.0
Products Tde Macno User s Manual BRAKING UNIT Cod. MP00401E00 V_1.0 SUMMARY 1 GENERAL DESCRIPTION... 2 2 USE LIMITATIONS... 2 2.1 Climatic Class... 2 2.2 Resistance To Chemically Active Substances...
More informationsinamics SINAMICS G110 Variable Speed Drives 0.12 kw to 3 kw SINAMICS G110 Short Form 2004
Variable Speed Drives 0.12 kw to 3 kw Short Form 2004 sinamics SINAMICS Variable Speed Drives 0.12kW to 3kW Product Information Pricing The is a Variable Speed Drive with basic functions for a variety
More informationCombined Ventilation Controller RVWS-T-224HA
Combined Ventilation Controller RVWS-T-224HA 8-stage Control for Power/Natural Applications 2 variable speed stages, 2 curtain winch stages, 2 fixed speed ventilation stages, 1 thermo/mister cycle stage
More informationSINUS K 13. ACCESSORIES Braking resistors APPLICATION TABLES 78/160 INSTALLATION INSTRUCTIONS
INSTALLATION 13. ACCESSORIES 13.1. Braking resistors 13.1.1. APPLICATION TABLES From size S05 to size S30, inverters are supplied with a built-in braking unit. The braking resistor is to be incorporated
More informationBAC2000ind.
DESCRIPTION ASI is a leader in the supply of industrial grade motor controllers with roots in electric vehicle technology dating back over 20 years. The is a high power density electric vehicle controller
More informationINTELLIGENT FLANGE STRÖTER. Magnetic pulse generator
INTELLIGENT FLANGE STRÖTER agnetic pulse generator Incremental magnetic pulse generator addons to drive systems is now possible in an easy and economical way both in new and existing installations. The
More information