Timer Relays - Fixed & Adjustable

Size: px

Start display at page:

Download "Timer Relays - Fixed & Adjustable"

Solomon Watts
5 years ago
Views:

Solid State Solid State relays are suitable across all

Unlike conventional relays, Solid State relays use electronics

multi-voltage and eliminating failures associated with

This guarantees extremely quick switching times and

Manufactured with standard housing and terminal configurations

Standard Coil Relay Weatherproof Relays Weatherproof relays

This protection rating is achieved by utilising a shrouded

Offered individually or in kit form in normally-open or

r Relays - Fixed & r relays are microprocessor controlled

1 Solid State Solid State relays are suitable across all applications where reliability is paramount. Unlike conventional relays, Solid State relays use electronics in place of traditional contacts, allowing them to be multi-voltage and eliminating failures associated with mechanical components. This guarantees extremely quick switching times and outstanding service life. Manufactured with standard housing and terminal configurations ensures compatibility with standard mini relay accessories. Standard Coil Relay Weatherproof Relays Weatherproof relays seal to IP67. This protection rating is achieved by utilising a shrouded relay housing with an accompanying sealed connector. Offered individually or in kit form in normally-open or changeover configuration. r Relays - Fixed & r relays are microprocessor controlled change-over relay units incorporating a time delay. Depending on the model, the time delay can trigger in either a delay on or delay off configuration. User adjustable models are available ex-stock. Made to order factory preset units available by special order. (Minimum order quantities apply.)

2 Solid State 98 Mini & Micro 99 r 102 r - Factory Preset 104 High Current 106 Specials 107 Voltage Sensor 108 Keys On Lights On 109 Smart Battery Isolator 110 Solenoids 111 Turbo rs 112

Solid State Solid state reliability. 9-30V operation.

Polymer Ingress Protection : IP5K4 Supply Current : OFF State <0.

no moving parts, eliminating failures normally associated with

Rated up to 25amps IONNIC Solid State relays provide faster

15 Positively Triggered Negatively Triggered Solid State Part No.

3 Solid State Solid state reliability. 9-30V operation. Fast switching speed. Silent operation. No moving parts. Replacement to mechanical relays. Voltage : 12/24V Operational (9-30V) Contact : Brass Body : Polymer Ingress Protection : IP5K4 Supply Current : OFF State <0.5mA ON State 5mA Solid State Relay IONNIC Solid state relays have no moving parts, eliminating failures normally associated with conventional mechanical switching relays. Rated up to 25amps IONNIC Solid State relays provide faster switching time, improved reliability and the convenience of 12/24V operation. 40mm 30mm 30mm No Moving Parts - No Contacts Positively Triggered Negatively Triggered Solid State Part No. Voltage Switching Amps Continuous Max Switching PE14-10P 12/24 Positive PE14-25P 12/24 Positive PE14-10N 12/24 Negative PE14-25N 12/24 Negative For accessories see page

Weatherproof Mini relays available - rated to IP67. Most models resistor protected. Full range of accessories available. Models available with mounting bracket.

23mm 4.8mm 85 30 85 30 PM2512R Fig 1 Fig 2 4 Terminal - Normally Open (N/O) 5 Terminal - Change Over (C/O) Micro Part No.

4 Weatherproof Mini relays available - rated to IP67. Most models resistor protected. Full range of accessories available. Models available with mounting bracket. Contacts : Silver Alloy Body : Polymer Ingress Protection : Micro, Mini IP54 Mini - Weatherproof IP67 Operating Temp : -40 C to C P2512R P1524R P1424R PM2512R P1512RWP Mini & Micro 25mm 15mm a 23mm 4.8mm PM2512R Fig 1 Fig 2 4 Terminal - Normally Open (N/O) 5 Terminal - Change Over (C/O) Micro Part No. Voltage Amps Contact Type Terminals Fig PM1412R N/O 4 1 PM1424R N/O 4 1 PM2512R 12 10/20 C/O 5 2 PM2524R 24 5/10 C/O / / Accessories - Micro Part No. Description 47002/10 Micro relay base kit - 10 pack. Interlocking base with mounting bracket Contents: 10 x Bases (47002), 20 x AMP Terminals ( ), 30 x AMP Terminals ( ) Micro relay base. Interlocking base with mounting bracket 47003/10 Micro relay base kit - 10 pack Contents: 10 x Bases (47003), 20 x AMP Terminals ( ), 30 x AMP Terminals ( ) Micro relay base AMP Terminal -. Suits 1-2.5mm 2 cable size. 100 pack AMP Terminal - 4.8mm. Suits 1-2.5mm 2 cable size. 100 pack 99

P1512RWP P1512RWP-KIT 69mm 35mm a 35mm 85 30 85 30 Ø6mm Fig 1 5 Terminal - Normally Open (N/O) Fig 2 5 Terminal - Change Over (C/O) Mini - Weatherproof Part No.

P1512RWP-KIT 12V N/O Weatherproof Relay Kit Kits contain: 1 x Mini Weatherproof Relay P1524RWP-KIT 24V N/O Weatherproof Relay Kit 1 x Base Connector (12065685) 1 x Sealing Blank (114017) P2512RWP-KIT

5 P1512RWP P1512RWP-KIT 69mm 35mm a 35mm Ø6mm Fig 1 5 Terminal - Normally Open (N/O) Fig 2 5 Terminal - Change Over (C/O) Mini - Weatherproof Part No. Voltage Amps Contact Type Terminals Mounting Bracket Fig P1512RWP N/O 5 Removable 1 P1524RWP N/O 5 Removable 1 P2512RWP 12 20/30 C/O 5 Removable 2 P2524RWP 24 10/20 C/O 5 Removable 2 P1512RWP-KIT 12V N/O Weatherproof Relay Kit Kits contain: 1 x Mini Weatherproof Relay P1524RWP-KIT 24V N/O Weatherproof Relay Kit 1 x Base Connector ( ) 1 x Sealing Blank (114017) P2512RWP-KIT 12V C/O Weatherproof Relay Kit 2 x Terminals 1-2mm 2 ( L) 3 x Terminals 2-3mm 2 ( L) P2524RWP-KIT 24V C/O Weatherproof Relay Kit L L Accessories - Mini Weatherproof Part No. Description Relay base connector L Packard Terminal - with pull to seat locking tab. Suits 2-3mm 2 cable size. 100 pack L Packard Terminal - with pull to seat locking tab. Suits 1-2mm 2 cable size. 100 pack 100

6 P1524R P1424R P2512R 41mm 26mm a 26mm Fig 1 Fig 2 Fig 3 6mm 4 Terminal - Normally Open (N/O) 5 Terminal - Normally Open (N/O) 5 Terminal - Change Over (C/O) Mini Part No. Voltage Amps Contact Type Terminals Mounting Bracket Fig P1424R N/O 4 Removable 1 P1512R N/O 5 Removable 2 P1524R N/O 5 Fixed 2 P2512R 12 20/30 C/O 5 Removable 3 P2524R 24 10/20 C/O 5 Removable 3 For bulk packs of 200, add -B to end of part number (eg P2524R-B). PRBC 47000/ / Accessories - Solid State, Mini & r Part No. PRBC Description Mini relay base kit. Interlocking base with mounting bracket Contents: 1 x Packard Base, 5 x Packard Terminals 47000/10 Mini relay base kit - 10 pack. Interlocking base with mounting bracket Contents: 10 x Bases (47000), 50 x AMP Terminals ( ) Mini relay base. Interlocking base with mounting bracket 47001/10 Mini relay base kit - 10 pack Contents: 10 x Bases (47001), 50 x AMP Terminals ( ) Mini relay base Mini relay base. For mounting to PC boards AMP Terminal -. Suits 1-2.5mm 2 cable size. 100 pack 101

TIM01 TIM05 Programmable time periods. Compact units. 10A switching current on most units. Clean contacts.

5 secs - 10 secs 1: OFF - 5 secs - 60 secs 2: OFF - 30 secs - 10 mins 3: OFF - 5 mins - 60 mins 4: OFF - 30 mins - 6 hrs 5: ON - 30 mins

5 secs - 10 secs r - Delay Type Increase Decrease Delay ON Delay OFF + 15 a 41mm 30mm 30mm 31 30 30 - r Positive Supply (B+) 31 - r

7 TIM01 TIM05 Programmable time periods. Compact units. 10A switching current on most units. Clean contacts. r PT Protection : Body : Resistor Polymer Delay Type 0: OFF secs - 10 secs 1: OFF - 5 secs - 60 secs 2: OFF - 30 secs - 10 mins 3: OFF - 5 mins - 60 mins 4: OFF - 30 mins - 6 hrs 5: ON - 30 mins - 6 hrs 6: ON - 5 mins - 60 mins 7: ON - 30 secs - 10 mins 8: ON - 5 secs - 60 secs 9: ON secs - 10 secs r - Delay Type Increase Decrease Delay ON Delay OFF + 15 a 41mm 30mm 30mm r Positive Supply (B+) 31 - r Negative (B-) 15 - r Switch/Control (B+) 5 Terminal - Change Over (C/O) Part No. Function Voltage Amps Delay PT Delayed turn OFF or Delayed turn ON sec to 6 hrs pt Delayed turn OFF or Delayed turn ON sec to 6 hrs For accessories see page

Multi Function TIM01 Delay On/Off Red LED indicates when relay is energised.

Decrease Decrease Switch 2: ON: Minutes OFF: Seconds Switch 1: OFF = Delay ON ON =

= Minutes 4: OFF = 1-30 ON = 2-60 5: OFF = 24V ON = 12V ON 1 2 Temporary activation at

4 5 Delayed at Turn On ON 1 2 Delayed at Turn On TIM06 ON 1 2 3 4 5 Cycle activation at

COM 6 Terminal - Change Over (C/O) + a 85 30 5 Terminal - Change Over (C/O) 43mm 30mm

Function Voltage Max Amps @ 12V Delay TIM01 Multi 12-24 3 1 sec to 60 mins TIM05

8 Multi Function TIM01 Delay On/Off Red LED indicates when relay is energised. Increase Increase Switch 1: Specifies when timer activates. Decrease Decrease Switch 2: ON: Minutes OFF: Seconds Switch 1: OFF = Delay ON ON = Instant ON - Delay OFF 2: OFF = Once only ON = Cycle ON-OFF-ON-etc 3: OFF = Seconds ON = Minutes 4: OFF = 1-30 ON = : OFF = 24V ON = 12V ON 1 2 Temporary activation at Turn ON TIM05 ON Temporary activation at Turn ON ON 1 2 Delayed Off ON Delayed at Turn On ON 1 2 Delayed at Turn On TIM06 ON Cycle activation at Turn ON ON 1 2 Temporary activation at Turn OFF 72mm 15mm 72mm 15mm 42mm + NC NO INH+ COM 6 Terminal - Change Over (C/O) + a Terminal - Change Over (C/O) 43mm 30mm 30mm TIM01 TIM05, TIM06 Multi Function Part No. Function Voltage Max 12V Delay TIM01 Multi sec to 60 mins TIM05 Delayed turn OFF sec to 60 mins TIM06 Delayed turn ON sec to 60 mins Protected microprocessor timer control circuit. TIM01: Incorporates timer reset terminal. 103

C r - Factory Preset User defined factory preset time. Flexible time periods. Compact unit. Clean contacts. Removable mounting bracket. Non-stocked item - lead times & MOQs apply.

6 Ingress Protection : IP5K4 Operating Temp : -40 C to + 80 C Approvals : CE, RoHS 15 a 56mm 28mm 28mm 31 30 30 - r Positive Input (B+) 31 - r Negative (B-) 15 - r Switch/Control (B+) 6mm 5 Terminal

9 C r - Factory Preset User defined factory preset time. Flexible time periods. Compact unit. Clean contacts. Removable mounting bracket. Non-stocked item - lead times & MOQs apply. Protection : Resistor Current Rating : 12V 20 Amps 24V 10 Amps Contact : Copper-Zinc Alloy Body : Nylon PA6.6 Ingress Protection : IP5K4 Operating Temp : -40 C to + 80 C Approvals : CE, RoHS 15 a 56mm 28mm 28mm r Positive Input (B+) 31 - r Negative (B-) 15 - r Switch/Control (B+) 6mm 5 Terminal - Change Over (C/O) Ordering System The fixed range of r Relays are programmed at the point of manufacture hence are a non-stocked item - lead times & MOQs apply. When ordering specify: - Type, - Voltage, -, - Seconds or Minutes. Minimum order quantity of 50 pieces. T20 T30 T31 T Volt Volt Part Number T S (01-60) S - Seconds M - Minutes T20 T30 Delay ON With constant positive feed to terminal 15 Preset Delay OFF With constant positive feed to terminal 15 Preset T31 T35 Delay OFF With positive trigger to terminal 15 Preset Delay OFF With loss of positive to terminal 15 Preset 104

10 atalogu Catalogues Lighting WL 2011 WL2011 Heavy Duty LED Heavy Duty HID Heavy Duty Halogen Marine General Purpose HID Driving Lights Interior Lighting Worklamps To get your copy visit ionnic.com EL 2011 EL2011 Available 2nd Qtr 2011 LED & Halogen Beacons Strobes Lightbars Minebars ROPS Bar Directional Arrows LED Lighting Bus Warning Light Kits Flasher Units Emergency Lighting To get your copy visit ionnic.com Available 2nd Qtr 2011 Lighting Safety Electrical

High Current P141270 PR12V200 P141275HD High current power relays. Models available up to 200A. Various mounting styles.

Terminal - Normally Open (N/O) PR12V200, PR24V100 P141275HD, P142450HD Power Part No.

11 High Current P PR12V200 P141275HD High current power relays. Models available up to 200A. Various mounting styles. Contacts : Silver Alloy Body : Polymer Operating Temp : -40 C to C Ø6mm 46mm 62mm 45mm 76mm Ø6mm Ø6mm 28mm 46mm Terminal - Normally Open (N/O) 75mm 34mm Terminal - Normally Open (N/O) PR12V200, PR24V100 P141275HD, P142450HD Power Part No. Mounting Bracket Voltage Amps Contact Type Terminals PR12V200 Fixed N/O 4 PR24V100 Fixed N/O 4 P141275HD Fixed N/O 4 P142450HD Fixed N/O 4 41mm 28mm 26mm Ø6mm 9.4mm Terminal - Normally Open (N/O) Mini - Power Part No. Mounting Bracket Voltage Amps Contact Type Terminals P Removable N/O 4 106

Flag indicator shows relay status in manual or powered condition. Bipolar LED status lamp allows for reverse polarity applications - ideal in low light conditions.

Protection : Resistor Contacts : Silver Alloy Body : Polymer Ingress Protection : IP40 Operating Temp : -40 C to + 55 C Approvals : CSA, CE, RoHS Specials 40mm 21mm 13 1 5 2 6 3 7 4 8 28mm 14(-) 9 10

12 Flag indicator shows relay status in manual or powered condition. Bipolar LED status lamp allows for reverse polarity applications - ideal in low light conditions. Colour-coded push button with lock-up door - allows for manual operation of relay without the need for coil power. White polymer ID tag for labelling in multirelay circuits. Protection : Resistor Contacts : Silver Alloy Body : Polymer Ingress Protection : IP40 Operating Temp : -40 C to + 55 C Approvals : CSA, CE, RoHS Specials 40mm 21mm mm 14(-) mm 14 Terminal - Change Over (C/O) 4 Pole Change Over Part No. Coil Voltage Amps per Contact Contact Type Terminals P C/O 14 P C/O 14 With P4512 mounted Accessories - Specials Part No. Description Amps Terminal No. of Poles Receptacle Relay base 7 M3 Screw 4 14 Blade 107

Voltage Sensor Internal change-over relay activates when the voltage falls below or rises above the preset level.

- Triggering an alert when a battery discharges to a preset level. - Automatic activation of a battery charger.

30mm 24mm Voltage 11 Voltage 11 On a Rising System Voltage* Energises 12 12.7 11.5 12.

13 13 Used to switch a circuit relative to system voltage. The user only sets the minimum voltage level (User Set Point).

13 Voltage Sensor Internal change-over relay activates when the voltage falls below or rises above the preset level. sensing range: VS V operation. VS V operation. Example uses: - Helps prevent the over-discharging of a battery. - Triggering an alert when a battery discharges to a preset level. - Automatic activation of a battery charger. Body : ABS Wire Length : 300mm Operating Temp : -0 C to + 50 C + NC NO IC - COM Voltage adjusting screw 5 Terminal - Change Over (C/O) 50mm 70mm 30mm 24mm Voltage 11 Voltage 11 On a Rising System Voltage* Energises User Set Point On a Falling System Voltage* De-Energises User Set Point *VS12 operation illustrated with default User Set Point Used to switch a circuit relative to system voltage. The user only sets the minimum voltage level (User Set Point). The VS12 maximum voltage level is approximately +0.7 volts higher than the User Set Point. The VS24 maximum voltage level is approximately +1.5 volts higher than the User Set Point. When the system voltage reaches the maximum voltage level the internal change-over relay energises switching the COM from NC to NO. When the system voltage falls below the minimum voltage level the internal relay de-energises switching the COM back to NC. Voltage Sensor Part No. Voltage Amps Sensing Range (volts) Factory Trigger Setting Minimum Voltage Maximum Voltage VS ± VS ±

Input available to disable control unit, eg. handbrake switch, door switch.

Compact easy installation. MS-LOR-12V features diagnostic LEDs.

Body : ABS Wire Length : 300mm MS-LOR-12V 200mm Operating Temp : -0 C to + 50 C MS-LOR-12V -0 C to +

Easy Installation MS-LOR-12V-KIT Keys On Lights On Controller is exceptionally easy to install.

Ø5mm 40mm 88mm 32mm Plugs directly into headlight harness 107mm Kits suiting other vehicles under

14 Allows normal operation of headlights. Designed to operate park & low beam lights any time vehicle ignition is on. Input available to disable control unit, eg. handbrake switch, door switch. All three internal 30 amp relays turn on 10 seconds after ignition is activated. Compact easy installation. MS-LOR-12V features diagnostic LEDs. MS-LOR-12V-KIT supplied with harness to plug into Toyota Hi-Lux headlight system. 2 year warranty. Body : ABS Wire Length : 300mm MS-LOR-12V 200mm Operating Temp : -0 C to + 50 C MS-LOR-12V -0 C to + 85 C MS-LOR-12V KOLO12DU Keys On Lights On mm 48mm MS-LOR-12V 95mm 24mm 94mm 68mm MS-LOR-12V-KIT - Easy Installation MS-LOR-12V-KIT Keys On Lights On Controller is exceptionally easy to install. Kit is supplied with plug-in harness to suit Toyota Hi-Lux. Ø5mm 40mm 88mm 32mm Plugs directly into headlight harness 107mm Kits suiting other vehicles under development. KOLO12DU, KOLO24DU Keys On Lights On Controller Part No. Voltage Description MS-LOR-12V 12 Suits any negativeley switched headlight MS-LOR-12V-Kit 12 Suits Toyota Hi-Lux only. Supplied complete with plug-in harness KOLO12DU 12 Suits any negatively earthed vehicle KOLO24DU 24 Suits any negatively earthed vehicle 109

Smart Battery Isolator SBI-12 1315-200 Microprocessor-controlled battery isolator

Cost-effective protection against a flat battery. Cooler operating temperature.

to + 60 C Ø7mm 83mm Ø8mm 102mm 7mm 83mm 103mm 74mm 54mm Ø8mm 51mm 55mm 1315-200 SBI-12,

15 Smart Battery Isolator SBI Microprocessor-controlled battery isolator designed for use in multi-battery applications. Cost-effective protection against a flat battery. Cooler operating temperature. Silver alloy contacts for longer life. Power saving technology. Fault indication. Surge-protected. 2 Year warranty. Body : Polymer Contact : Silver Alloy Operating Temp : SBI -0 C to + 50 C C to + 60 C Ø7mm 83mm Ø8mm 102mm 7mm 83mm 103mm 74mm 54mm Ø8mm 51mm 55mm SBI-12, SBI-24 Smart Battery Isolator Part No. Voltage Amps Inrush Continuous Off Volts On Volts Current Draw (Amps) SBI SBI

55mm Ø7mm Ø8mm Ø5mm 7mm 55mm Ø8mm Ø5mm Ø8mm 60mm 89mm Ø8mm Ø5mm 55mm 70mm 89mm 83mm 70mm Fig 1 Fig 2 Fig 3 Solenoids Part No.

16 Range of normally open & change over style contacts. Integrated mounting brackets. 12 & 24 volt models available Fig 1 4 Terminal - Normally Open (N/O) Fig 2 6 Terminal - Change Over (C/O) ST85 Solenoids Fig 3 4 Terminal - Normally Open Includes Auxiliary Output (N/O) 15-3F 55mm Ø7mm 59mm 55mm Ø7mm Ø8mm Ø5mm 7mm 55mm Ø8mm Ø5mm Ø8mm 60mm 89mm Ø8mm Ø5mm 55mm 70mm 89mm 83mm 70mm Fig 1 Fig 2 Fig 3 Solenoids Part No. Voltage Amps Duty Contact Type Fig ST Continuous N/O 1 ST Continuous N/O Continuous N/O Continuous N/O Continuous N/O Continuous N/O /100 Continuous C/O /100 Continuous C/O F Intermittent N/O 3 111

Turbo rs BES-124/ST-4 CST-515 Multiple mounting options. Energise to run or stop models. Models with remote face.

BES-925/ST-1 Voltage : 12-24V Current Rating : 10 Amps max BES-925/ST1 91mm 24mm 25mm 29mm 50mm 130mm Remote Face - Part

5, 1, 2, 3, 4, 5 yes Non-electronic engine management BES-925/ST-4 1 Run yes 0.

17 Turbo rs BES-124/ST-4 CST-515 Multiple mounting options. Energise to run or stop models. Models with remote face. 5 Minute Fixed models feature 30A switching capacity via serviceable external relay V operation. BES-925/ST-1 Voltage : 12-24V Current Rating : 10 Amps max BES-925/ST1 91mm 24mm 25mm 29mm 50mm 130mm Remote Face - Part No. Outputs Energise to Remote Face Intervals (mins) Park Brake Override Description BES-925/ST-1 1 Run yes 0.5, 1, 2, 3, 4, 5 yes Non-electronic engine management BES-925/ST-4 1 Run yes 0.5, 1, 2, 3, 4, 5 yes Electronic engine management BES-925/ST-5 2 Run yes 0.5, 1, 2, 3, 4, 5 yes Electronic engine management CTR-M 1 Stop yes 0.5, 1, 2, 3, 4, 5 no Electronic engine management 112

18 33mm 25mm 54mm 75mm BES-124/ST4 Part No. Outputs Energise to Remote Face Intervals (mins) Park Brake Override Description BES-124/ST-1 1 Run no 1, 3, 5 no Non-electronic engine management BES-124/ST-2 2 Run no 1, 3, 5 no Non-electronic engine management BES-124/ST-4 1 Run no 1, 3, 5 no Electronic engine management 112mm 52mm 58mm CST-515 Gauge Mount - Fixed Part No. Outputs Energise to Remote Face Intervals (mins) Park Brake Override Description CST Run no 5 no Relay driven output CST Stop no 5 no Relay driven output 113

Timer Relays - Fixed & Adjustable

Timer Relays - Fixed & Adjustable Solid State Solid State relays are suitable across all applications where reliability is paramount. Unlike conventional relays, Solid State relays use electronics in place of traditional contacts, allowing