MAGNET FLOAT LEVEL TRANSMITTER

Transcription

1 MAGNET FOAT EVE TANSMITTE http: // Tel: Fax: PINCIPE The "Magnet Float evel Transmitter" is composed of the float and sensing rod (shown as below). As the float raised or lowered by liquid level, the sensing rod will have a resistance output, which is directly proportional to the liquid level. Also, the float level indicator can be equipped with the TAB-100 (please see page 3) to produce a 0/4~0mA signal. In addition, we can use with PB series bargraphic display scaling panel meter for level control and display. Anyway, "Magnet Float evel Indicator" is a great benefit to all kinds of industries with its easy working principle and reliability. FEATUES 1 Every sensing element is protected by a plastic Package, safety in use and transport. (as fig. 1) 1 High performance and reliability of electric circuit Modular designed (as fig.). 1 ower installation costs, less maintenance, reduced personnel training, and decreased plant shock down time. Magnetic Float evel Transmitter PB Series AICATIONS Applied for waste water treatment turn-key facility, Electric power plant, shipping vessel, hydraulic facility, chemical industrial equipment, petrochemical industry and hot coal boiler. e.g. diesel engine generator, motor oil meter, oil storage tank. SCHEMATIC IAGAM OF THE PINCIPES 1. Sensing od 1 3 o i. Float Io 3. Transmitter 4. isplay Unit o: esistance output Io: 4~0mA output 4 6 Sensing Element Size CONSTUCTION eed Switch 4 Connection cable esistor COM EXC IN Sensing Element Fig. eed switch module Magnet Float Float Fig.1 Sensing Element Sensing od 1

2 HOUSING IMENSION B Material : Aluminum Enclosure : IP65 Max.Temp.: -0BC ~00BC 18 f118 Explosion-proof f113 1/" NPT 108 G PG 16 85x80 55 C 1/"PF Material : P.P.+Fiber Enclosure : IP65 Max.Temp.: -0BC ~80BC 107 Material : Aluminum Enclosure : NEPSI Ex d IIC T3~T6 ATEX II G EEx d IIBT3~T6 ATEX II IP65 T3~T6 Max.Temp.: -0BC ~00BC Material : PC Enclosure : IP65 Max.Temp.: -0BC ~80BC K Explosion-proof 100 f90 N Explosion-proof f70 X f70 3/4"NPT 100 1/"NPT 80 1/"PF 80 3/4"NPT Material : Aluminum Enclosure : CESI 03 ATEX 108 ATEX II G EEx d IIC T6 Max.Temp.: -0BC ~100BC Material : 316 Enclosure : NEPSI Ex d IIC T3~T6 ATEX II G EEx d IIB T3~T6 ATEX II IP65 T3~T6 Max.Temp.: -0BC ~00BC Material : Aluminum Enclosure : IP65 Max.Temp.: -0BC ~100BC 1 FOAT SPECIFICATION imension Type AxBxC(mm) S.G. Max. Pressure (kg/cm ) Material Max. Temp. (BC) Approx. Weight (g) A S3 45x55x BC 37.6 B C S6 75x108x BC 165 A S4 5x5x BC 33.4 B S5 S8 75x73x19 100x100x BC 00BC C S9 150x150x BC 534 A B P3 48x45x BC 35.5 C A B F4 48x60x BC 65.3 C

3 TANSUCE MOE: TAB-100 Transducer Voltage Supply : oop power 1~3VC Output Current : 4~0mA oad esistance : (Max)=50(Vs-8) Ambient Temperature : 0 BC~70BC Ambient Humidity : 0~80% H Accuracy : A0.1%(5BC) Temperature Effect : 0.5%FS Adjustment ange : Span Ajustment 0% FS Zero Ajustment 5% FS EXC IN COM ZEO SPAN -Wire (TAB-100) +4V EXC IN COM O/P ZEO SPAN EXC+4V O/P A Input EXC+4V EXC4V Current Input PB Series Panel Meter 3

4 ECONOMICA Connection cable Float 1 SPECIFICATION Connection Cable: Silicon cable 3CH1M Output: 3-wire resistance output Operating Temp.: tube -10 BC ~ 80 BC tube -0 BC ~ 10 BC tube -0 BC ~ 10 BC Order No. Connecting Tube size & Material () Float type & Material Suitable S.G. Measuring ange FG9-A4 3/8"PF f14 S3: f45x55 S4: f5x5 FGA...Max.6M FGB...Max.6M FG9-A7 3/8"PF f17. S5: f75x73 S6: f75x108 FGA...Max.6M FGB...Max.6M FGB-C5P3 3/4"PF f17. P3: f48x45 >0.6 FGB...Max.6M FGB-C6F4 3/4"PF F4: f48x60 FGB...Max.6M MOE : FG 9w ength (unit: mm) Float Type (see page ) Tube Type (see page 9) Connecting Type (see page 9) esolution (see page 9) A: 6.35mm (3 wire) B: 1.7mm (3 wire) 4

5 STANA 0 B type housing, dimension see page. 1/"PF 1/"PF 1 SPECIFICATION Terminal Housing: Aluminum, IP65 Output:4~0mA, -wire resistance output Operating Temp.: -0 BC ~ 10 BC Ambient Temp.: 0~70 BC Order No. Connecting Tube size & Material () Float type & Material Suitable S.G. Measuring ange FG9BFQ4 "NPT f14 S3: f45x55 S4: f5x5 FGC/...Max.6M FG9BGN4-1/"x10kg/cm f14 S3: f45x55 S4: f5x5 FGC/...Max.6M FGBHN7 3"x10kg/cm f17. S5: f75x73 S6: f75x108 >0.45 FG...Max.6M FGBIQ7 4"NPT f17. S8: f100x100 FG...Max.6M FGBKN8 FGBKN9 6"x10kg/cm f1.7 f7. S9: f150x150 >0.45 FG...Max.1M MOE : FG9 B ength (unit: mm) Float Type (see page ) Tube Type (see page 9) Connecting Type (see page 9) Housing Type (see page ) esolution (see page 9) C: 6.35mm ( wire) : 1.7mm ( wire) 5

6 ANTI-ACI / AKAINE 0 C type housing, dimension see page. 1/"PF 1/"PF 1/"PF Flange -1/"x10kg/cm "NPT pipe pipe pipe Wetted parts: Wetted parts: Wetted parts: 1 SPECIFICATION Terminal Housing: +Fiber, IP65 Output: 4~0mA, -wire resistance output Ambient Temp.: 0~70 BC Operating Temp.: jacket tube -10 BC ~ 80 BC jacket tube -0 BC ~ 10 BC Order No. Connecting Tube size & Material () Float type & Material Suitable S.G. Measuring ange FGCFQ5P3 "NPT f17. P3: f48x45 FG...Max.6M FGCFQ6F4 "NPT F4: f48x60 FG...Max.6M FGCGN5P3-1/"x10kg/cm f17. P3: f48x45 >0.6 FG...Max.6M FGCGN6F4-1/"x10kg/cm F4: f48x60 FG...Max.6M Every unit is protected by or jacket to prevent the sensing rod from chemical corrosion. MOE : FG C ength (unit: mm) Float Type (see page ) Tube Type (see page 9) Connecting Type (see page 9) Housing Type (see page ) esolution (see page 9) : 1.7mm ( wire) 6

7 0K type ATEX Explosion proof Enclosure can be selected, dimension see page. K type K type housing 3/4"NPT 3/4"NPT Flange -1/"x10kg/cm Wetted parts: 1 SPECIFICATION Terminal Housing: K type --- Aluminum, ATEX EEx d IIC T6 Output: 4~0mA, -wire resistance output Ambient Temp.: 0~70 BC Operating Temp.: tube -10BC ~ 80BC tube -0BC ~ 10BC tube -0BC ~ 10BC Order No. Connecting Tube size & Material () Float type & Material Suitable S.G. Measuring ange FG9KFQ4 FG9KGN4 "NPT -1/"x10kg/cm f14 f14 S4: f5x5 S4: f5x5 FGA/B...Max.6M FGC/...Max.6M FGA/B...Max.6M FGC/...Max.6M FGKHN7 3"x10kg/cm f17. S6: f75x108 >0.45 FG...Max.6M FGKIQ4 4"NPT f17. S8: f100x100 FG...Max.6M FGKFQ5P3 "NPT f17. P3: f48x45 >0.6 FG...Max.6M FGKFQ6F4 "NPT F4: f48x60 FG...Max.6M FGKGN5P3-1/"x10kg/cm f17. P3: f48x45 >0.6 FG...Max.6M FGKGN6F4-1/"x10kg/cm F4: f48x60 FG...Max.6M MOE : FG ength (unit: mm) Float Type (see page ) Tube Type (see page 9) Connecting Type (see page 9) Housing Type (see page ) esolution (see page 9) C: 6.35mm ( wire) : 1.7mm ( wire)

8 MUTI-FUNCTION The" Multi-Function Magnetic Float evel Transmitter" is composed of the float and sensing rod (Shown as below). As the float raised or lowered by liquid level, the sensing rod will have a resistance output, which is directly proportional to the liquid level. Also, the Multi-Function Magnetic Float evel Transmitter can be quipped with a transducer to produce a 0/4~0mA signal. In addition, it can be compatible with Panel Meters for remote control. It has great benefit to all kinds of industries with its easy principle and reliability. 1 SPECIFICATION Terminal Housing: Aluminum/+Fiber (IP65) Measured Total esistance: 1K~MW Output: Wire 4-0mA Output Ambient Temp.: -40~70BC Operation Temp.: Stainless Steel: -40BC~10BC P.P.: -10BC~80BC : -0BC~10BC Power Supply: oop Power 1~36Vdc Output Current: 4~0mA Output inear ange: 3.8~1.5mA Output atch: Upper Output: ma ower. Output: 3.5mA C isplay: 1999~9999 oad esistance: = (Vs-1)*50W Environment Humidity: 0~80% H Accuracy: 0.1%F.S. (5BC) Temperature Coefficient: 100ppmF.S./ BC Alarm Output: Mode: Photocoupler x Contact Capacity: 8~30Vdc (15mA) Operation Model: Alarm: Process High Alarm/ Process ow Alarm FG F Series Standard Model FG F Series Anti-Acid/Alkaline Model f84 f84 f84 f84 f /"PF 105 1/"PF 105 1/"PF 105 1/"PF 105 1/"PF -1/"x10kg/cm Material Pipe Material Pipe "NPT Material Pipe Wetted Parts Wetted Parts Wetted Parts 8

9 OE INFOMATION ESOUTION A: 6.35mm (3-wire) B : 1.7mm (3-wire) C : 6.35mm (-wire) : 1.7mm (-wire) TEMINA HOUSING (see page ) B : Aluminum (IP65) C : P.P (IP65) : Aluminum (Ex d IIC T3~T6) E : A. (Small space) IP65 G: PC (IP65) K: Aluminum (EEx d IIC T6) N: (Ex d IIC T3~T6) F : Aluminum FG C F Q 6 E: 6.35mm (MUTI-FUNCTION) F: 1.7mm (MUTI-FUNCTION) - : None S : Others F (P) CONNECTING TYPE A: 3/8" (10A) B: 1/" (15A) C: 3/4" (0A) : 1" (5A) E: 11/" (40A) F: " (50A) G: 1/" (65A) imension H: 3" (80A) I : 4" (100A) J : 5" (15A) K: 6" (150A) 4 : 7" (175A) 5 : 8" (00A) Tri-Clamp 1-1/"=ES; "=FS TUBE TYPE & MATEIA 0: f1.7 (304) Only available for resolution 1.7mm. 4: f14 (304) 5: f17. (P.P.) 6: () 7: f17. (304) 8: f1.7 (304) 9: f7. (304) Specification M: 5 Kg/cm N :10 Kg/cm O: 150 bs P : 300 bs Q : PT : PF(G) T : BSP U : NPT V : GAS S : Others C: f1.7 (316) Only available for resolution 1.7mm. B: f14 (316) : f17. (316) E: f1.7 (316) F: f7. (316) FOAT TYPE (see page ) Material Plastic Type P3 F4 S3 S4 S5 S6 S8 S9 ENGTH (UNIT : mm) 0500: 500mm up 1000: 501~1000mm 1500: 1001~1500mm 500mm per Unit Use English letter as first code for probe length over 10m. A150 represents 15m, A00 represents 0m PIPE SHIE 0 Tolerance of the total product length is A5mm. 0 Characteristics, specifications and dimensions are subject to change without notice. 0 Please contact us for further informations. 9

10 ENCOSUE EXPOSION POOF (PASTIC JACKET) 0 or N type housing can be selected, dimension see page. NEPSI POOF No.GYJ0631 Ex d IIC T3~T6 PTB POOF No. 05 ATEX 108 II G EEx d IIB T3~T6 II IP65 T3~T6 f113 type f113 type f70 N type f70 N type 1/"NPT 108 1/"NPT 108 1/"NPT 80 1/"NPT 80 pipe "NPT pipe pipe pipe Wetted parts: Wetted parts: 1 SPECIFICATION Terminal Housing: type --- Aluminum, Ex d IIB T3~T6 N type ---, Ex d IIC T3~T6 Output: 4~0mA, -wire resistance output Ambient Temp.: 0~70 BC Wetted parts: Wetted parts: Operating Temp.: tube -10 BC ~ 80 BC tube -0 BC ~ 10 BC tube -0 BC ~ 10 BC OE NO. FG7 MOE NO. 7 Connecting Tube size & Material () Float type & Material Suitable S.G. Measuring ange 79FQ4 "NPT f14 S3: f45x Max.3M 79GN4-1/"x10kg/cm f14 S3: f45x Max.3M 7HN7 3"x10kg/cm f17. S5: f75x73 > Max.6M 7IQ4 4"NPT f17. S8: f100x Max.6M 7KN8 7KN9 7KN8 7KN9 6"x10kg/cm f1.7 f7. S9: f150x150 > Max.6M 7FQ5P3 "NPT f17. P3: f48x45 > Max.6M 7FQ6F4 "NPT F4: f48x Max.6M 7GN5P3-1/"x10kg/cm f17. P3: f48x45 > Max.6M 7GN6F4-1/"x10kg/cm F4: f48x60 OE NO.:FG MOE NO.: ength (unit: mm) Float Type (see page ) Tube Type (see page 11) 7...Max.6M Connecting Type (see page 11) Housing Type (see page ) esolution (see page 11) C: 6.35mm ( wire) : 1.7mm ( wire)

11 COE NAME INFOMATION Order No. FG7 F Q 6 Model No. 7 F Q 6 F () F () ESOUTION A : 6.35mm (3-wire) B : 1.7mm (3-wire) C : 6.35mm (-wire) : 1.7mm (-wire) TEMINA HOUSING (see page ) : A (Ex d IIC T3~T6) N: (Ex d IIC T3~T6) CONNECTING TYPE imension A : 3/8" (10A) B : 1/" (15A) C : 3/4" (0A) : 1" (5A) E : 11/" (40A) F : " (50A) G : 1/" (65A) H: 3" (80A) I : 4" (100A) J : 5" (15A) K : 6" (150A) 4 : 7" (175A) 5 : 8" (00A) Specification M: 5 Kg/cm N:10 Kg/cm O:150 bs P : 300 bs Q: PT : PF(G) T : BSP U: NPT V: GAS S: Others TUBE TYPE & MATEIA 0: f1.7 () Only available for resolution 1.7mm. 4: f14 () 7: f17. () 5: f17. (P.P.) 8: f1.7 () 6: () 9: f7. () FOAT TYPE (see page ) Material Plastic Type P3 F4 S3 S4 S5 S6 S8 S9 ENGTH (UNIT : mm) TAG 0500: 500mm up 1000: 501~1000mm 1500: 1001~1500mm 500mm per Unit Use English letter as first code for probe length over 10m. A150 represents 15m, A00 represents 0m 0 Tolerance of the total product length is A5mm. 0 Characteristics, specifications and dimensions are subject to change without notice. 0 Please contact us for further informations. 11

12 INSTAATION The float level indicator should be mounted far away from liquid inlet, any strong liquid Fluctuation will produce error output signals. It is requested a pipe shield or equivalent evice to normalize the indicator actuation if the indicator is used with any agitator Application. It had better require an type supporter, when the level indicator is mounted in concrete wall tank as figure below. It is recommended to select the standpipe with diameter(d) larger than the float ball for Installation process. 1