Flow switches Series AD/VH

Transcription

1 Flow switches Series AD/VH Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight, no contact between process fluid and switching, indicator or transmitter systems Suitable for installation in horizontal or vertical pipes Robust construction Scales available for H 2O, air, oil, etc. (series AD) Flow rate (for liquids): - Series AD: l/min - Series VH: m 3 /h Accuracy for series AD: ±5% f.s. Connections: - Series AD: ¼... 2 ½ BSP / NPT - Series VH: G1 / 1 NPT, to be inserted on a DN32... DN500 pipe Materials: - Series AD: EN (AISI 316L), aluminium, brass - Series VH: EN (AISI 316L), PTFE Flow switching: - 1 reed switch (series AD & VH) - 2 reed switches (only series AD) - 1 or 2 inductive switches (only series AD) All switches for series AD are ATEX Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da certified Options for model ADI15: - Local flow indication - Electronic transmitter with 4-20 ma output for safe or hazardous area (Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da protection, ATEX certified). HART protocol available on request

2 Series AD Working principle A spring M keeps a disk B in zero flow rate position. When the fluid flows through the disk at a specific speed, a force is made on the disk B, moving it to an equilibrium position. The distance covered by B depends on: - The force of the fluid flow F. - The relationship between areas A & B. - The force in opposition of the spring C. The equilibrium between forces F and the one generated by C defines the position of the disk B, equivalent to flow rate. The disk B, which contains a magnet M, acts over the switches and/or the local indicator. Technical data Accuracy: ±5% full scale Scale range: according to flow rate chart on page 4 Scales in l/h, l/min, l/s, m 3 /h, %, etc. Connections: ¼... 2 ½ BSP / NPT Materials: - Brass from ¼ to 2 - Aluminium from 1 ¼ to 2 ½ - EN (AISI 316L) on request Fluid temperature: -20ºC ºC (max. allowable 120ºC) Working pressure: PN16 (others on request) Vertical or horizontal mounting, as per customer s request Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da ATEX certificate Operation Vertical upwards flow (BD) Vertical downwards flow (DAB) Horizontal flow from left to right (ED) Horizontal flow from right to left (DES) Applications Machine or processes cooling Hydraulic and lubrication circuits Thermal oil circuits Gas flow control Mechanical fasteners cooling control Limit switches and transmitters Reed switches: SPDT potential free. Polyamide housing and IP65 connector /1A = 1 reed switch /2A = 2 reed switches Reed switch technical data: - ADR01: for sizes ¼ & ½ : 0,25 A 175 VDC 5 W - ADR11: for sizes ¾ to 2½ : 1 A 250 V 60 VA M1-AMD1... 2: adjustable inductive switches (+ relays on request) TH6... TH6H: 4-20 ma 2-wire transmitter HART protocol for model TH6H All switches and transmitters are ATEX available Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da version AD15 ADI15 with one or two reed switches local flow indication optionally with: - one or two reed switches - one or two inductive switches ma transmitter TH6 transmitter 2

3 Flow switches Series AD/VH Materials ¼ ¼... 2 ½ Nº Description Materials ¼ ¼... 2 ½ 1 Body Brass / AISI 316L / Anodized aluminium * 2 Disk 3 Magnet Ferrite ** 4 Switch Polycarbonate - PVC - NBR 5 Washer AISI 316L 6 Spring AISI Housing Polycarbonate - Coated aluminium 8 Screw AISI Gasket NBR *** * Materials available for each size: ¼... 1 : brass, AISI 316L 1 ¼ 2 : brass, AISI 316L, anodized aluminium 2 ½ : AISI 316L, anodized aluminium ** magnet with plastic coating for applications with corrosive liquids on request *** other materials on request 3

4 Dimensions Flow ranges AD15 ADI15 R (BSP / NPT) ¼ ½ Flow scales l/min water ¾ " ¼" ½ " ½" * Equivalent flow ranges for air at 1 bar abs 20ºC in Nl/min: l/min H 2 O x 8 (approx.) Mounting Vertical upwards AD15/BD ADI15/BD ADI15+TH6 Vertical downwards AD15/DAB ADI15/DAB R (BSP / NPT) A B C F L Weight (kg) ¼ ½ ¾ " ¼" ½ " Ø ½" Ø All dimensions in mm Horizontal / Left to right Horizontal / Right to left AD15/ED ADI15/ED AD15/DES ADI15/DES 4

5 Flow switches Series AD/VH Model AD15 Flow switch with min-max flow rate reed switches. Vertical or horizontal mounting, as per customer s request. Adjustable reed switch for the full flow scale, mounted in a polyamide housing, IP65 ingress protection. Flow scale in l/h, l/min, l/s, m 3 /h, %, etc. Model ADI15 Local flow indicator, with optional min-max flow rate reed switches, adjustable for the full flow scale and mounted in an IP65 polyamide housing; and/or adjustable inductive switches, mounted in the indicator housing. Vertical or horizontal mounting, as per customer s request. Aluminium indicator housing with polycarbonate cover, IP65 ingress protection, graduated scale in flow rate units, reading by means of indicating needle. Flow and reed switch scale in l/h, l/min, l/s, m 3 /h, %, etc. Model ADI15 + TH6 Same characteristics as model ADI15, including electronic transmitter with 2-wire 4-20 ma output. Limit switches and transmitters Adjustable limit switch M1-AMD Optional for model ADI15. NAMUR (EN ) 3.5 mm slot type inductive detector activated by vane, mounted in the indicator housing. M1-AMD1 2: 1 2 adjustable limit switches Power supply: 8 VDC Ambient temperature: -25 C C ATEX certification Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da Control relay (on request) NAMUR (EN ) for 1 or 2 inductive detectors. Power supply: VAC Hz VDC Input: NAMUR Ex ia IIC Output: 1 or 2 relay contacts Output rating: 2 A 250 VAC 100 VA / 1 A 24 VDC Ambient temperature: -20 C C Transmitter TH6 Power supply: 2-wire system, VDC Power consumption: max. 20 ma Analog output (4-20 ma): - Error: < 0,6% of the magnet position - Maximum load in 4-20 ma loop: 1.1 kω (with 36 VDC power supply) Ambient temperature: -5ºC ºC Transmitter connector: Packing gland M12x1.5 Optional: ATEX certification Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da, with model TH6 Ex Optional: HART protocol, with model TH6H 5

6 Series VH Working principle A liquid flows inside a pipe fast enough to move a paddle, which at the same time moves a permanent magnet that acts over the reed switch. The magnet-reed switch system is isolated from the liquid. The flow switching point is positioned between 30º and 45º from the zero position. Materials Applications Hydraulic and heating-cooling circuits Chemical, petrochemical and pulp & paper industry Water treatment, power plants Swimming pools & fire protection systems VH35 / SS... PTFE VH37 / SS BD VH39 / PTFE BD horizontal pipe vertical pipe with upwards flow, with spring vertical pipe with upwards flow, with magnetic spring Technical data Flow detection by means of oscillating paddle SPDT potential free reed switch, mounted in the body, not wetted by the liquid Connections: G1 (1 NPT on request) Materials: EN (AISI 316L), PTFE Others on request Fluid temperature: -40ºC ºC (max. allowable 150ºC) Working pressure: - AISI 316L body: PN25 (others on request) - PTFE body: PN10 Mounting: horizontal or vertical upwards pipe Nº Description VH / SS Materials VH / PTFE 6 Operation Vertical upwards flow (BD) Horizontal flow from left to right Horizontal flow from right to left Limit switches Reed switch: potential free switch Contact rating: Maximum switching power: 5W Maximum switching voltage: 175 VDC Maximum switching current: 0.25 A Electrical connection: connector IP65 DIN A Suitable for hazardous area, considered as Simple apparatus 1 Connector Polyamide 2 Screw AISI Gasket NBR 4 Connector base Polyamide 5 Gasket NBR 6 Spring AISI Body AISI 316L PTFE 8 Magnet holder PVDF PTFE 9 Reed switch Glass 10 Pin AISI 316 PTFE 11 Paddle AISI 316L PTFE

7 Flow switches Series AD/VH Dimensions Switching flow rates DN mm DN inch Switching flow rate (1) m³/h L mm 32 1 ¼ ½ ½ (1) Approximate flow rates Mounting Horizontal / left-right or right-left: model VH35 VH35 / SS VH35 / SS VH35 / PTFE Vertical upwards: model VH37 / 39 BD VH37 / SS BD VH35 / PTFE VH39 / PTFE BD 7

8 PRESENCE IN MORE THAN 50 COUNTRIES ALL OVER THE WORLD R-CT-ADVH Rev. 2 english version Tecfluid S.A. Narcís Monturiol Sant Just Desvern Barcelona Tel: Fax: tecfluid@tecfluid.com Quality Management System ISO 9001 certified by Pressure Equipment Directive 97/23/CE certified by ATEX European Directive 94/9/CE certified by HART is a registered trademark of HART Communication Foundation The technical data described in this specification sheet is subject to modification without notification if the technical innovations in the manufacturing processes so require.