General Specifications
|
|
|
- Job Rice
- 6 years ago
- Views:
Transcription
1 General Specifications Model RAGG Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float is mounted in a vertical pipeline with flow direction upwards. The flow is indicated by the top of the float and can be read on the standard scale of the metering tube or on a pin-on scale. When the process conditions are changed the scale needs to be replaced by a new one of which the values should be calculated. FEATURES - Large selection of measuring ranges - High accuracy by free rotating float even at low flow rates - Low pressure loss - Visual check of the medium - Non-powered local indication - Large selection of scales - High corrosion resistance - Exact scale calculation at changed process medium according to VDE/VDI guidelines 3513 with the use of the flow table (option /PT) STANDARD SPECIFICATIONS Measurable flow rates - Water (20 C) : 2.5 l/h to 10 m3/h - Air (20 C ; 1 bar abs.) : 40 l/h to 100 m3/h Measuring range : metering tube G: 10:1 Metering tubes : L6; L7; G0 to G4 Accuracy : according to VDI 3513 class 1,6 Max. pressure Metering tube G0; G1 G2 G4 Max. Temperature - Standard : 100 C Material process connection - Loose flange : Gasket : ; PTFE Housing material: : steel; plastic (gasket PTFE) Length Weight : approx. 500 mm : 6 to 14.5 kg (depending on design) Pmax (bar) Rota Yokogawa GmbH & Co. KG Rheinstr. 8 D Wehr Germany Copyright 2004
2 2 OPTIONS LIMIT SWITCH (OPTION CODE: /GM1 AND /GM2) (for float with magnet only and flow Q min > 2.5 l/h water or 100 l/h air) Type : reed contact with bistable switching Max. switching voltage : 230 V Max. switching current : 0.6 A Max. switching capacity : 12 VA or 12 W Temperature range : -10 C to +70 C Protection : IP 65 Internal capacity : 0 nf Internal inductivity : 0 mh Electrical connection : LIYY 2 x 0.34mm²; 1 m long Housing : Polystyrol Weight : 35 g Explosion proof : Intrinsic safe acc. EN50020 chapterl 5.4 Simple electrical instruments. Group : IIC Category : 2 Expl. atmosphere : G Temperature class : T6 Entity parameter : Ui = 15V ; Ii = 50mA ; Pi = 187mW Li 0mH ; Ci 0nF POWER SUPPLY FOR LIMIT SWITCH (OPTION /W ) Type : Transmitter relay acc. DIN EN (NAMUR) Power supply : 230V AC (/W2_) 115V AC (/W1_) 24V DC (/W4_) Switching capacity : max. 250 V AC; max. 4A or max. 500 VA Relay output : 1 or 2 potential free changeover contacts Explosion proof : Intrinsic safe [EEx ia] II C acc. PTB 00 ATEX 2081 (/W2_) acc. PTB 00 ATEX 2080 (/W4_)
3 3 MODEL SPECIFICATIONS Process connection Model Process Process Housing Design Metering connection connection material (valve) tube Flange Material length/dia. DIN flange with Code Code Code Code Code Code Loose flange DN 15 PN 40 RAGG01 D4 SS; PF ST NNN G0;G1 Loose flange DN 25 PN 10 RAGG02 D1 SS; PF ST NNN G2 Loose flange DN 40 PN 10 RAGG04 D1 SS; PF ST NNN G4 Process connection DIN flange PN 10 D1 DIN flange PN 40 D4 Process connection material SS (gasket) PTFE... PF Material Rotameter steel/plastic... ST Design without valve... NNN The suffix code of the metering tube - float combination can be read from the flow tables... -xxxx xxxx Options (see separate tables)... /xx
4 4 FLOW TABLE WITH METERING TUBE - FLOAT - COMBINATION FOR WATER / LIQUIDS Flow table Suffix code metering tube - float- combination Water / liquids 20 C Metering tube Float Recommended comb. Altemative comb. -x x xx x -xx x x x Row 1 Row 2 Max. Pressure Max. Pressure Length Diameter Metering Scale Material Diam. Flow Ins. Flow drop *) Flow drop *) tube cone mark. [l/h] [mbar] [l/h] [mbar] Code Code Code Code Code Code Code Code G G 0 47 G; G 0 51 A; G 0 52 N G 1 53 Row 1 Row G 1 54 SS G G 1 61 M 2) G N G 2 63 Row 2 Row G 4 64 PF G G 4 71 Description Length metering tube 300 mm... G Diam. metering tube 20 mm to 81 mm... x Cone metering tube see flow table... xx Metering tube-medium Scale on metering tube (mm division) 3)... G Scale Pin up scale with mm division (recommended)... A Metering tube with mm division only... N Float material SS PTFE... PF Float diameter 12 mm to 54 mm... x Flow mark Factor 1 (Water)... 3 Factor 0.63 (Water)... 2 Float insertion without magnet... N with magnet (for limit switch /GM 1 and /GM 2)... M 2) 2) For option limit switch /GM1 and /GM2 3) Option /MM is indicated in case no mm scale is desired. *) The indicated pressure drop may deviate depending on the flowmeter used. Other metering tube - float combinations with other float materials and a variety of measuring ranges are available on request.
5 5 FLOW TABLE WITH METERING TUBE - FLOAT - COMBINATION FOR AIR / GASES Flow table Suffix code metering tube - float- combination Air / Gases 20 C 1 bar absolute Metering tube Float Recommended comb. Altemative comb. -x x xx x -xx x x x Row 1 Row 2 Max. Pressure Max. Pressure Length Diameter Metering Scale Material Diam. Flow Ins. Flow drop *) Flow drop *) tube cone mark. [l/h] [mbar] [l/h] [mbar] Code Code Code Code Code Code Code Code G G 0 47 G; G 0 51 A; G 0 52 N G 1 53 Row 1 Row 1 Row G 1 54 AL ; PP 1 5 N G G G G 2 63 Row 2 Row2 Row G 4 64 PP 4 7 M 1) ;N G G 4 71 Description Length metering tube 300 mm... G Diam. metering tube 20 mm to 81 mm... x Cone metering tube see flow table... xx Metering tube-medium Scale on metering tube (mm division) 2)... G Scale Pin up scale with mm division (recommended)... A Metering tube with mm division only... N Float material Polypropylen... PP Aluminium... AL Float diameter 12 mm to 54 mm... x Flow mark Factor 10 (Air)... 3 Factor 25 (Air)... 2 Float insertion without magnet... N with magnet (for limit switch /GM 1 and /GM 2)... M 1) 1) For option limit switch /GM1 and /GM2 2) Option /MM is indicated in case no mm scale is desired. *) The indicated pressure drop may deviate depending on the flowmeter used. Other metering tube - float combinations with other float materials and a variety of measuring ranges are available on request.
6 6 OPTIONS Options Option code Description Marking /B1 /B4 /B8 /BG Limit switches /GM1 /GM2 Tag plate (SS) Neutral version Customer provided marking on label Customer specific notes on scale Magnetic contact MIN Magnetic contact MAX Restrictions Plate 12 x 40 mm; max. 45 digits Only with float with magnet Only with float with magnet Test and certificates Accessoires metering tube Power supply for limit switch(es) (transmitter relay) /H1 /P2 /P3 /PP /PT /MM /W1A /W1B /W2A /W2B /W4A /W4B Certificate of degrease Certificate of Compliance with the order acc. to EN 10204: As /P2 +Test report acc. to EN 10204: Pressure test report for measuring system With flow table for recalculation No mm- scale (without calculation table) KFA5-SR2-Ex1.W / 115 V AC, 1 channel KFA5-SR2-Ex2.W / 115 V AC, 2 channels KFA6-SR2-Ex1.W / 230 V AC, 1 channel KFA6-SR2-Ex2.W / 230 V AC, 2 channels KFD2-SR2-Ex1.W / 24 V DC, 1 channel KFD2-SR2-Ex2.W / 24 V DC, 2 channels Procedure to select the model code Please decide in the following order - Measuring range for water / liquids or air / gases - Limit switch desired or not Select the desired measuring range from the concerning flow table. Regard the float insertion (last column) necessary for limit switch. Then select the suffix code for the tube - float- combination. Then complete the code by tube length and tube diameter To size the Rotameter for other medium - process- conditions use sizing program Durep V.
7 7 DIMENSIONS g DN K D i m DN D K g l Ind. m i Weight kg kg kg
8 8
General Specifications
General Specifications Model RAGG Rotameter GS 01R01B06-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float
General Specifications
General Specifications Model RAGK Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float is mounted in
General Specifications
eneral Specifications Model RAH Rotameter S 01R01B05-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. The mounting
General Specifications
General Specifications Model RAGK Rotameter GS 01R01B07-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float
General Specifications
General Specifications Model RAGG Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float is mounted in
General Specifications
General Specifications Model RGL Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float is mounted in a
General Specifications
General Specifications Model RAKD Small Metal Rotameter GS 01R01B30-00E-E A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator.
General Specifications
General Specifications Model RAKD Small Metal Rotameter A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator. The shorttube Rotameter
GA 24 Heavy-duty variable area flowmeter
KROHNE 10/99 D 11 GA24 01 E GR Heavy-duty variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
General Specifications
General Specifications Model RAGK Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float is mounted in
General Specifications
General Specifications Model RAGL Rotameter GS 01R0108-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This metering
General Specifications
General Specifications Model RAKD Small Metal Rotameter GS 01R01B30-00E-E A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator.
General Specifications
General Specifications Model RAKD Small Metal Rotameter GS 01R01B30-00E-E A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator.
General Specifications
General Specifications Model RAGL Rotameter GS 01R01B08-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This metering
YOKOGAWA. General Specifications. Model RAKC Short-tube Rotameter. GS 1R1B3-E-H 4rd Edition
General Specifications Model RAKC Short-tube Rotameter A conical float is guided into a cylindrical metal tube provided with an orifice plate. The position of this float is magnetically transmitted to
General Specifications
General Specifications Model RAGL Rotameter GS 01R01B08-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This metering
General Specifications
General Specifications Model RAG Glass ROTAMETER GS 01R01B10-00E-E The Rotameter RAG is designed for continuous flow measurement of liquids and gases. The fluid passes through the metering tube from bottom
Flap-Type Flow Meter Prall
Suitable for H 2 O, acids, alkaline solutions and gases Spring-loaded flap Horizontal or vertical direction of flow Largely independent of viscosity Limit contacts, optional Analog output 4 20 ma, optional
General Specifications
General Specifications Model RAKD Small Metal ROTAMETER GS 01R01B30-00E-E The short-tube Rotameter is used for measurement of low flow rates of liquids and gases. Its special application is in troubled,
Metal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
General Specifications
General Specifications Model RAGK Laboratory Glass ROTAMETER GS 01R01B0700EE This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating
Metal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam
Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,
Ar-Mite TM Low Flow Armored Flowmeter
Data Sheet Brooks Ar-Mite TM MT 3750C Ar-Mite TM Low Flow Armored Flowmeter Ar-Mite TM Model MT 3750 Metal Tube Flowmeter Ar-Mite TM Model MT 3750 Metal Tube Flowmeter with Transmitter or Inductive Alarm
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
YOKOGAWA. General Specifications. Model RAMC-Series Metal Short-stroke Rotameter
General Specifications Model RAMC-Series Metal Short-stroke Rotameter Rotameters operate on the principle of generating a condition of dynamic balance within the flow meter in which a float is positioned
Differential Pressure and Flow meters Accessories for the Media Series
Differential Pressure and Flow meters Accessories for the Media Series 7 8 9 10 11 6 12 Media 5 Media 6 Media 05 1 5 2 4 Media 4 3 Selection and application These accessories upgrade the devices of the
INLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1
INLINE Flow sensor for hazardous area II G/D - II D - II GD - I M Type SE0 Ex can be combined with... Flow meter with NAMUR or NPN/PNP output signal Mounting, dismounting of electronics by a Quarter-Turn
Application The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam Metallic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in
BGN. All Metal Variable Area Flow Meter. Technical Data Sheet
All Metal Variable Area Flow Meter BGN Technical Data Sheet Extremely robust through star guiding system instead of guiding rod Flow metering of liquids, gases and steam Available up to nominal size of
K - Flow Meter with Float
K - Flow Meter with Float Doc. no.: 18, en_cat_k, 12/2014, rev. 1 Application All-metal flow meters with float type K are used for signaling and measuring of instant flow, flowed volume of liquid and fluent
Design and application
Design and application The function of the SGM is based on the variable area float principle. In all cases where a dependable device is required for indicating instantaneous values and monitoring the flow
Variable area flowmeter H 250
KROHNE 10/99 D 11 H250 01 E GR Variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring instruments
Volumeter TRZ 03-K PRODUCT INFORMATION. Reliable Measurements of Gas
Volumeter TRZ 0-K PRODUCT INFORMATION Reliable Measurements of Gas Method of operation, Construction Method of operation The TRZ 0-K Volumeter is a flow meter suitable for metering gases, where the rate
Model Connections Max. Flow Range (H 2 O) 10A A3220 Horizontal ¼ NPT 100 l/h. 10A3225/55 Vertical ¼ NPT 100 l/h. Vertical 1 NPT Vertical 1 G
Data Sheet Field IT Variable Area Flowmeters Armored Purgemeter 10A3200 n n n Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases.
Volumeter. RMG Meßtechnik GmbH. Publication No E
Volumeter TRZ 03-K RMG Meßtechnik GmbH Publication No. 3.171-E P.O.Box 80 D-3550 Butzbach (Germany) Phone: +49 (0)6033 897-0 Fax: +49 (0)6033 897-130 E-mail: messtechnik@rmg.de Web site: http://www.rmg.de
Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF)
Level measurement Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF) TC Fluid Control WIKA data sheet LM LM 3001 30.01 for further approvals see page 3 Applications
Level switches (two-term level controllers) ERH-xx-04,-06,-07,-16,-16.1 Description
edit. II 2015/ page 1 Level switches (two-term level controllers) ERH-xx-04,-06,-07,6,6.1 Description The limit level signalling or two-term liquid level control in the open or closed pressure tanks. The
Plastic tube variable area flowmeter for liquids and gases
Plastic tube variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding connections)
Variable V Area Flowmeter Rotameter The Original
Variable V Area Flowmeter Rotameter The Original precise measurement of liquids and gases robust and universal proven device with an installed base of more than 500,000 worldwide a wide product range many
Orifice plate flowmeters Series PR By-pass flowmeter for liquids, gases and steam
Orifice plate flowmeters Series PR By-pass flowmeter for liquids, gases and steam By-pass flowmeter with orifice plate (compact system PRC and separate system PR) for big flow ranges Flow indication by
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
RMG Meßtechnik GmbH. Publication No E
Turbine meter TRZ 03 RMG Meßtechnik GmbH Publication No. 3.161-E P.O.Box 80 D-3550 Butzbach (Germany) Phone: +49 (0)6033 897-0 Fax: +49 (0)6033 897-130 E-mail: messtechnik@rmg.de Web site: http://www.rmg.de
BFS-10-O G1/4: BFS-10-O G1/2: BFS-10-O G1: Contact rating: BFS-10-O G1/4
Flow Switches Index: B / 923-1838 BFS-10-N / BFS-10-O for monitoring liquids, with or without optical display Features set point continuously adjustable rugged, low hysteresis, any mounting position, high
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
Absolute pressure gauge with diaphragm
Absolute pressure gauge with diaphragm and switch function,type series BF2 Features Absolute pressure gauge with diaphragm and switch function Nominal ranges 0 60 mbar abs to 0 2500 mbar abs With integrated
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
SITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
Flowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
Magnetic Level Gauges
Magnetic Level Gauges Instrumentation Division > Immediate and accurate response to level changes, giving clear and sharp legibility. > Continuous indication of liquid level. The well proven TC Klinger
FS10. Vertically-Mounted Magnetic Float Level Sensor. Level Measurement and Monitoring. reliable and robust, heavy-duty technology
Level Measurement and Monitoring FS10 Vertically-Mounted Magnetic Float Level Sensor reliable and robust, heavy-duty technology mounting thread, tank fitting or flange installation at top or bottom of
Variable Area Flowmeters Armored Purgemeter
Data Sheet (US) Variable Area Flowmeters Armored Purgemeter 10A3200 Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases. The instrument
Flow switches Series AD/VH
Flow switches Series AD/VH Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling,
KM-165, KM-185, KM-200 OVERVIEW. Flow Monitor & Flow Indicator. Features. Operation
Flow Monitor & Flow Indicator KM-165, KM-185, KM-200 OVERVIEW Operation Float measuring principle Application Cooling systems and cooling circuits Mechanical engineering Pharmaceutical industry Chemical
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
THE EXPERT IN LEVEL AND FLOW
LEVEL GAUGING SYSTEM Type: Maglink Series: 5300 and 5400 Technical Information 04/2016 LEVEL THE EXPERT IN LEVEL AND FLOW Maglink Level Gauging System Technical Information Intra-Automation - 1 - Intra-Automation
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
Flowmeters with Float. Flow Measurement of Gases & Clear Liquids with Float Series 6001 & Series 6001/ Measurement Principle.
Flowmeters with Float Series 6001/ 6002 Flow Measurement of Gases & Clear Liquids with Float Series 6001 & 6002. Measurement Principle Variable area obtained by the displacement of a float in a conical,
Variable Area Flow Meters
JJ Series VS1 JJ Series VS3 JJ Limit switches Variable Area Flow Meters DS_Variable_Area_Flow_Meters 01/2017 185 Variable area flow meters Principle of operation Variable area flow meters are used in pipelines
Material pressure (bar) (Cv (US) kv x 1,2 Seat. N/en
00 / poppet valves electromagnetic actuated, directly controlled, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 8, DIN V Valves for safety systems up to SIL Solenoid valve also suitable
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Brooks GT1000 Series. Industrial Glass Tube Variable Area Flowmeters. GT1000 Series. Data Sheet DS-VA-GT1000-eng January, 2008
Data Sheet GT1000 Series Brooks GT1000 Series Industrial Glass Tube Variable Area Flowmeters Model GT1020 Model GT1024 DESIGN FEATURES Brass or 316L SS (1.4404) end fittings Flanged or threaded connections
SATRON VT Pressure Transmitter
SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring
Solenoid Valves Type 3963
Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate
Quantometer MZ. Description
Quantometer MZ < High accuracy budget meter < Flow rate up to 10000 m 3 /h < Pressure range up to 100 bar < Equipped as standard with the cyble target. < Various options available: Low and high frequency
HG5 Series. Metal Tube Rotameter CATALOG MAIN FEATURES TECHNICAL PARAMETERS
H5 Series Metal Tube Rotameter H5 series metal tube rotameter (also called variable area flow meter) is a kind of measuring meter which the flow rate is changing along with the area and is widely used
Differential pressure gauge with diaphragm
Differential pressure gauge with diaphragm and switch function,type series BG2 Features Differential pressure gauge with diaphragm and switch function Nominal range -40...0 mbar to -1...24 bar, 0 40 mbar
For single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
Magnetic Level Gauges
Magnetic Level Gauges Instrumentation Division > Immediate and accurate response to level changes, giving clear and sharp legibility. > Continuous indication of liquid level. The well proven TC Fluid Control
Fluxi 2000/TZ Turbine Gas Meter
Fluxi 2000/TZ Turbine Gas Meter Turbine gas meters are flow meters. The flow of gas turns a turbine wheel, and thus, the rotating speed of the turbine is proportional to the linear speed of the gas. The
ORIMAS Mass Flowmeter
Typical Applications ORIMAS Mass Flowmeter The ORIMAS mass flow meters measure the mass flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical
NAMUR FLANGE: With integrated exhaust air recirculation Ordering information
00 TÜV-approval based on IEC 6 08, DIN V 9 Approvals: DIN EN 6/9 DVGW, group Rm and EN 6 Valves for safety systems to SIL or AK 7 / Directional control valves Actuation: electromagnetic Directly controlled
Our policy is one of continued research and development. We therefore reserve the right
970 Namur /-, /- and /-Directional control valves Electromagnetic indirectly controlled soft seal spool valves G /4, /4 NPT NAMUR-interface For single and double operated actuators Exhaust air recirculation
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic
Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*
Magnetic Float Switches horizontal 1003-h
Magnetic Float Switches horizontal 1003-h Table of contents Index Table of contents 82 Description and function 83 Certificates / Approvals 84-85 Magnetic Float Switch horizontally mounted 1003-h Stainless
Variable-Area Flowmeter for Horizontal and Vertical Installation BGF. Device Description
Variable-Area Flowmeter for Horizontal and Vertical Installation BGF Device Description Contents 1 Identification...4 1.1 Supplier/manufacturer...4 1.2 Product type...4 1.3 Product name...4 1.4 Issue date...4
M-60X. Explosion Proof Flowswitch with In-line Flow. Description. Key Features. Operating Principle. Applications. Custom Version Available
Explosion Proof Flowswitch with In-line Flow Key Features Well suitable for corrosive and noncorrosive liquids or gases UL recognized for hazardous location ATEX certified for intrinsic safety and encapsulation
Material pressure (bar) (Cv (US) kv x 1,2 Seat
00 / way poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V 9 Valves for safety systems up to SIL Solenoid valve
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
Flowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media
Turbine flowmeters Series TM
Turbine flowmeters Series TM Suitable for liquids Possibility of installation in all flow directions Special design for high pressure available Excellent relationship flow range / flowmeter size Low pressure
Special valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
Variable-Area Flowmeter BGN. Device Description
Variable-Area Flowmeter BGN Device Description Contents 1 IDENTIFICATION... 4 1.1 Supplier/manufacturer... 4 1.2 Product type... 4 1.3 Product name... 4 1.4 Issue date... 4 1.5 Version no... 4 2 APPLICATIONS...
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
SATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
Level instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram
Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
M-200X. Explosion Proof Adjustable Flow Switch with Right Angle Flow. Key Features. Description. Operating Principle. Applications
Explosion Proof Adjustable Flow Switch with Right Angle Flow Key Features Field adjustable Infinite flow range Extremely accurate and sensitive Low pressure drop UL recognized for hazardous location ATEX
The EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric.
Typical Applications EPSILON Flowmeter The EPSILON flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and the power
VFM4070C SWIRLMAX. Vortex Flowmeter OUTLINE FEATURES OPERATING PRINCIPLE STANDARED SPECIFICATION. General Specification. Sensor Specification
SWIRMAX VFM4070C Vortex Flowmeter OUTINE SWIRMAX is 2-wire, all-in-one type vortex flowmeter with both temperature and pressure sensors integrally mounted into the housing. It allows temperature and pressure
97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
Magnetic float switch For vertical installation Model FLS
Level measurement Magnetic float switch For vertical installation Model FLS KSR data sheet FLS for further approvals see page 3 Applications Level measurement for almost all liquid media Pump and level
Direct-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
WBS 3000 Water Bottom Sensor for fuel oil and chemical storage tanks Installation and Operating Instructions
Labkotec Oy Myllyhaantie 6 FI-33960 PIRKKALA FINLAND Tel: +358 29 006 260 Fax: +358 29 006 1260 12.3.2013 Internet: www.labkotec.com 1/12 WBS 3000 Water Bottom Sensor for fuel oil and chemical storage
L21 Magnetic Level Indicator
L21 Magnetic Level Indicator Float magnetic level meter for continuous level measurement of liquids - Remote data transmission - Use in potentially explosive atmospheres - Robust and versatile design -