SATRON VTe pressure transmitter

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SATRON VTe pressure transmitter"

Transcription

1 SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa MPa ranges. The transmitter communicates in a -wire system. In pressure measuring applications SATRON VTe -transmitters are used for measuring the pressure of clean gases, steam, sedimenting, crystallizing and sticking liquids.the transmitter's sensor is piezoresistive. The rangeability is 00: for types VTe 6 - VTe 8. The transmitter communicates digitally using the HART protocol. TECHNICAL SPECIFICATIONS Measuring range and span See Selection Chart. Zero and Span adjustment Zero elevation: Calibrated span is freely selectable on the specified range made by using HART 75/375 communicator. Damping Time constant is continuously adjustable 0,0 to 60 s. Response time max. 00 ms Temperature limits Ambient: -30 to +80 C Process: -30 to +5 C Shipping and storage: -40 to +80 C. Pressure limits Min. and max. process pressure: See the appended tables. Volumetric displacement < 0.5 mm 3 /max. span Output -wire (W), 4-0 ma, user selectable for linear, square root, inverted signal or the transfer function (6 points)specified by the user Supply voltage and permissible load See the load capacity diagram; 4-0 ma output: 0-35 VDC. Humidity limits 0-00 % RH; freezing of condensed water not allowed in reference pressure channels. PERFORMANCE SPECIFICATIONS Tested in accordance with IEC770: Reference conditions, specified span, no range elevation, horizontal mounting; AISI36L diaphragm, silicone oil fill. Accuracy ±0. % of calibrated span (span :- 7.5: /max.range). On the measuring ranges 7.5: - 00:: max.span ±[ x ( ]% of calibrated span ) calibrated span (incl. nonlinearity, hysteresis and repeatability) Long-term stability ±0. %/max. span/ months Temperature effect on compensated temperature ranges C Zero and span shift, types VTe 5 - VTe 8: ±0.5 % of max. span Zero and span shift, type VTe 4: ±0,5 % of max. span Mounting position effect (VTe 4... VTAe 7) Zero error < 0.5 kpa, which can be calibrated out. VTe 8: mounting position has no effect Vibration effect (IEC 68--6: FC): ±0. % of measuring range/ g/0 to 000 Hz 4g/0 to 00 Hz Power supply effect < ±0.0 of calibrated span per volt European Directive Information European Pressure Equipment Directive (PED) (97/3/EY) Model VTe 8 : - Module A Conformity Assessment All other models : - Sound Engineering Practice Electro Magnetic Compatibility (EMC) (89/336/ETY) Insulation test voltage 500 V rms 50 Hz CONSTRUCTION Wetted materials: AISI36L, Titanium (VTe 8). Other materials: AISI36, AISI303 Pressure limits Maximum process pressure, MPa Transmitter type VTe 4 VTe 5 VTe 6 VTAe 7 VTe 8 Max. overload. pressure, MPa Pressure class PN40 PN40 PN00 PN50 PN000 Housing with PLUG connector, housing type codes H and P Housing: AISI36, Seals: Viton and NBR TEST jacks: MS358Sn/PVDF, protected with TPE rubber shield. PLUG connector: PA6-GF30 jacket, Silicone rubber seal, AISI36 retaining screw. Housing with junction box/terminal strip, housing type code M Housing: AISI303/36, Seals: Nitrile and Viton ; Nameplates: Polyester Filling fluid: Silicone oil or inert oil (VTe 4... VTAe7) Enclosure class IP Load / Ω = 0.5mA Operating region R max = Supply voltage - 0V Supply voltage / V = 0.5mA using HART -communication I min = 3.7mA = 3mA (when the alarm current.5ma is on) Minimum process pressure (VTe 8 : no min. pressure limitations) T proc. C Minimimum pressure for different fill fluid (kpa, abs.) DC00 00 cst Inert oil Satron Instruments Inc., P.O.Box, FIN-3390 Tampere, Finland Tel , Telefax ,

2 Electrical connections Housing with PLUG-connector, code H, connector type DIN model AF; Pg9 gland for cable; wire gross-section 0,5 to,5 mm. Housing with junction box/terminal strip, M: M6x.5 inlet; screw terminals for 0.5 to.5 mm wires Weight Transmitter - with housing types H : 0,3 kg - with housing type P : 0,35 kg - with housing type M : 0,5 kg Dimensions (mm) 58 (VTe 4-6) 43 (VTAe 7) DIN688 - A DIN688 - A, code (VTe 8) 5 DIN688-A DIN688 - A, code 53 (VTe 4-6) 38 (VTAe 7) 54 (VTe 8), code 5 (VTe 4-6) 0 (VTAe 7) 4 DIN385-E- Ø6.8 DIN385-E-A, flash mounted, code 3 48 (VTe 4-6) 33 (VTAe 7) 54 (VTe 8) DIN688 - G¼A DIN688 - G¼A, code 4

3 Dimensions (mm) 3 (VTe 4-6) 7 (VTAe 7) 0,5 A Ø6.8 A, flash mounted, with o-ring, code 5 46 (VTe 4-6) 3 (VTAe 7) 4 (female), code 6 34 (VTe 4-6) 9 (VTAe 7) 3 Ø6.3 PMC " (Ø6,3), code 7 66 Ø44,5 L Std. M6x,5 Housing with junction box, code M, VTe 4-6, dimension L = 50, VTAe 7, dimension L = 35, VTe 8, dimension L = 0, VTe 4-6, dimension L = 45, VTAe 7, dimension L = 30, VTe 8, dimension L = 45 3, VTe 4-6, dimension L = 5 3, VTAe 7, dimension L = 00 4, VTe 4-6, dimension L = 40 4, VTAe 7, dimension L = 5 4, VTe 8, dimension L = 45 5, VTe 4-6, dimension L = 0 5, VTAe 7, dimension L = 0 6, VTe 4-6, dimension L = 35 6, VTAe 7, dimension L = 0 7, VTe 4-6, dimension L = 5 7, VTAe 7, dimension L = 0

4 Mitat (mm) L Housing with plug connection and display, code P, VTe 4-6, dimension L = 5, VTAe 7, dimension L = 00, VTe 8, dimension L = 80, VTe 4-6, dimension L = 0, VTAe 7, dimension L = 95, VTe 8, dimension L = 0 3, VTe 4-6, dimension L = 80 3, VTAe 7, dimension L = 65 4, VTe 4-6, dimension L = 05 4, VTAe 7, dimension L = 90 4, VTe 8, dimension L = 0 5, VTe 4-6, dimension L = 90 5, VTAe 7, dimension L = 75 6, VTe 4-6, dimension L = 00 6, VTAe 7, dimension L = 85 7, VTe 4-6, dimension L = 90 7, VTAe 7, dimension L = 75 ma ma Hart Test Test Load 3 Power Load Power Wiring housing codes H and P Wiring housing code M 47 Hex 7 Hex 7 5 DIN M8 Hex 7 Thread DIN688 - A Order code : T Thread DIN688 - G¼A Order code : T309 DIN688 G¼A A Thread ½ - 4 NPT, male Order code : T3093 The process connection of the flush mounted transmitters can be changed using modification 6k-AV 7 35 Ø6,3 PMC " (Ø6,3), for process connection code 5 Order code : T3030 Thread ½ - 4 NPT, female Order code : M05047

5 Selection Chart Adjustability Span, min Span, max Measuring range VTe 4 4 kpa (40 mbar) 00 kpa (000 mbar) kpa ( mbar) VTe 5 0 kpa (00 mbar) 500 kpa (5000 mbar) kpa ( mbar) VTe MPa (0.3 bar) 3 MPa (30bar) -0,...+3 MPa ( bar) VTAe MPa (0.3 bar) 3 MPa (30 bar) MPa ( bar), abs. VTAe MPa (.5 bar) 5 MPa (50 bar) MPa ( bar), abs. VTe 8 MPa (0 bar) 00 MPa (000 bar) MPa ( bar) Output S 4-0mA DC/HART DIN688-A (male) (male) 3 DIN 385-E-A (male), (flash mounted), not VTe 8 4 DIN688 - G¼A (male) 5 A (male),(flash mounted), with o-ring, not VTe 8 6 (female) 7 PMC " (outside diameter 6.3 mm), not VTe 8 Wetted materials Body Diaphragm Code Material Code Material AISI36L AISI36 (no VTe 8) 6 Titanium ( only VTe 8) Fill fluid (specify for types VTe 4... VTAe 7) S Silicone oill G Inert oil (*) Housing type H Housing with plug connector, DIN43650, no display, inlet PG9 P Housing with plug connector, DIN43650, display, inlet PG9 M Housing with junction box / terminal strip, no display, inlet M6x,5 Explosion proof 0 No explosion proof classification Special size of electrical inlet N / NPT G Pg3.5 Documentation Installation and operating insructions I E English I F Finnish Material certificates O No material certificate MC Raw material certificate without appendixes, in accordance with SFS-EN (DIN ) standard MC Raw material certificate for wetted parts, in accordance with SFS-EN (DIN ) standard MC3 Raw material certificate for wetted parts, in accordance with SFS-EN B (DIN B) standard Calibration Transmitter is calibrated for maximum range with 0.5 sec. damping Calibration for customer-specified range and item positioning must be mentioned in the order. (*) = Oxygen cleaning must be ordered separately! Satron SI-Toole Order code : M33000 Connection with Satron SI-Toole

6 Process couplings ØD out Ø B A.5 Ø Ø30 Ød C Order code: M E Process coupling DIN 385-X- Pipe size ød out A B C Ø d E Order code DN M DN M DN M Other sizes, please contact Satron Instruments Inc. T-coupling DIN 385-X-, sizes DN Ø8 Ø8 Order code: M Process coupling DIN Order code: M Coupling 3 Process coupling 5 6 Ø7 3,5 Ø8,3 Ø30 Welding assistant M050370MS 4 Welding Sequence Order code: M05055 Coupling (for process connection code 5) Welding the coupling M Satron Instruments Inc., P.O.Box, FIN-3390 Tampere, Finland Tel , Telefax We reserve the right for technical modifications without prior notice. HART is a registered trademark of HART Communication Foundation. Viton is the registered trademark of DuPont Down Elastomers. MEETS THE COUNCIL OF THE EUROPEAN UNION DIRECTIVE 89/336/EEC FOR ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS.

SATRON VT Pressure Transmitter

SATRON VT Pressure Transmitter SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring

More information

SATRON VDt Differential Pressure Transmitter

SATRON VDt Differential Pressure Transmitter SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire

More information

SATRON VVFe Pressure Transmitter

SATRON VVFe Pressure Transmitter SATRON VVFe pressure transmitter belongs to Vtransmitter family. SATRON VVFe is used for 0 4 kpa...0500 kpa ranges. It is a 2wire transmitter with HART standard communication. SATRON VVFe pressure transmitter

More information

Page SATRON VT Pressure transmitter 7 SATRON VB Pressure transmitter 15

Page SATRON VT Pressure transmitter 7 SATRON VB Pressure transmitter 15 2 3 28.11.2017 Pressure measurement Page SATRON VT Pressure transmitter 7 SATRON VB Pressure transmitter 15 Differential pressure and flow measurement SATRON VDt Differential pressure transmitter 23 SATRON

More information

Pressure transmitter for industrial applications Type MBS 4510

Pressure transmitter for industrial applications Type MBS 4510 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,

More information

Pressure transmitters for industrial applications Type MBS 4510

Pressure transmitters for industrial applications Type MBS 4510 Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel

More information

JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram

JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It

More information

Rosemount 1810 Flush Mount Pressure Transmitter ROSEMOUNT 1810 FEATURES:

Rosemount 1810 Flush Mount Pressure Transmitter ROSEMOUNT 1810 FEATURES: Rosemount 1810 Rosemount 1810 Flush Mount Pressure Transmitter ROSEMOUNT 1810 FEATURES: A cleanable and compact stainless steel design An innovative patented venting configuration that prevents gauge reference

More information

JUMO MIDAS S05 Pressure transmitter Type

JUMO MIDAS S05 Pressure transmitter Type Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement

More information

PRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER

PRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER PRESSURE PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE The PYRP-28 pressure transmitter is suitable for the measurement of pressure, vacuum and absolute pressure of gases, vapours and liquids for industrial

More information

XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.

XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO. Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others

More information

Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar

Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter

More information

Pressure transmitter for industrial applications Type MBS 4500

Pressure transmitter for industrial applications Type MBS 4500 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,

More information

TEK-B AR 3110A. Differential Pressure Transmitter. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys PRESSURE

TEK-B AR 3110A. Differential Pressure Transmitter.   Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys PRESSURE Technology Solutions TEK-B AR 3110A Differential Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Bar 3110A Differential

More information

ABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet

ABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive

More information

JUMO dtrans p02. Pressure transmitter. General application. Approvals/marks of conformity. Data Sheet Page 1/6. II 1/2G Ex ia IIC T6 Ga/Gb

JUMO dtrans p02. Pressure transmitter. General application. Approvals/marks of conformity. Data Sheet Page 1/6. II 1/2G Ex ia IIC T6 Ga/Gb sales@jumo.co.uk info@jumo.us Data Sheet 404385 Page 1/6 JUMO dtrans p02 Pressure transmitter II 1/2G Ex ia IIC T6 Ga/Gb General application The pressure transmitter Type JUMO dtrans p02 is used to measure

More information

Pressure Transmitter JUMO dtrans p30 Type

Pressure Transmitter JUMO dtrans p30 Type Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The

More information

Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050

Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS

More information

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)

More information

DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial

More information

DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP

More information

INTERPLANT STANDARD - STEEL INDUSTRY. Specification for Smart Pressure & Differential Pressure Transmitter

INTERPLANT STANDARD - STEEL INDUSTRY. Specification for Smart Pressure & Differential Pressure Transmitter INTERPLANT STANDARD - STEEL INDUSTRY IPSS Specification for Smart Pressure & Differential Pressure Transmitter Corresponding IS does not exist IPSS: 2-07-104-15 1. Scope 1.1 This Interplant Standard covers

More information

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87 SMART VALVE POSITIONER to ma + HART Digital Communication B87 DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces

More information

Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050

Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers

More information

Pressure transmitter for marine applications MBS 3100 and MBS 3150

Pressure transmitter for marine applications MBS 3100 and MBS 3150 Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.

More information

JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features.

JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features. Data sheet 405052 Page 1/10 JUMO DELOS SI Precision pressure transmitter with switching contacts and display Application Food & pharma CIP/SIP systems Machine and system construction Air conditioning and

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with

More information

Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050

Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all

More information

DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up

More information

Pressure transmitters for heavy duty applications MBS 3200 and 3250

Pressure transmitters for heavy duty applications MBS 3200 and 3250 Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,

More information

Pressure transmitters for heavy duty applications Type MBS 3250

Pressure transmitters for heavy duty applications Type MBS 3250 Pressure transmitters for heavy duty applications Type MBS 3250 Features Designed for use in harsh industrial environments For medium and ambient temperatures up to 125 C With integrated pulse-snubber.

More information

Smart Pressure Transmitter

Smart Pressure Transmitter DOC. NO.: C3500L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3500L 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,

More information

Pressure transmitter for general purpose Type MBS 1700 and MBS 1750

Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose

More information

DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm

DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals

More information

JUMO dtrans p20 DELTA

JUMO dtrans p20 DELTA Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision

More information

Differential pressure transmitter PASCAL Ci4 Delta P

Differential pressure transmitter PASCAL Ci4 Delta P Differential pressure transmitter PASCAL Ci4 Delta P for high static working pressure, PN 160, Type series CI4340 Features Simultaneous display of differential pressure and static pressure Long-term stability

More information

Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure

Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable

More information

High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250

High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe

More information

Installation and Setting-Up Instructions Spare Parts List

Installation and Setting-Up Instructions Spare Parts List Man.rev.2 Installation and Setting-Up Instructions Spare Parts List Contents : TECHNICAL DATA 2 CONSTRUCTION AND OPERATION 3 INSTALLATION 4 SETTING-UP 5 MAINTENANCE DOCUMENTS Technical Specifications :

More information

BGN. All Metal Variable Area Flow Meter. Technical Data Sheet

BGN. All Metal Variable Area Flow Meter. Technical Data Sheet All Metal Variable Area Flow Meter BGN Technical Data Sheet Extremely robust through star guiding system instead of guiding rod Flow metering of liquids, gases and steam Available up to nominal size of

More information

Differential Pressure Sensors

Differential Pressure Sensors 1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output

More information

Pressure transmitter for marine applications MBS 33M

Pressure transmitter for marine applications MBS 33M Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,

More information

Special Purpose Transmitters

Special Purpose Transmitters Special Purpose Transmitters Type UT-10/UT-11 UNITRANS Universal Pressure Transmitter User Adjustable Turndown of up to 1:20 Large, Easy-to-Read LCD includes Bar Graph and Trend Display The UniTrans pressure

More information

Installation and Setting-Up Instructions

Installation and Setting-Up Instructions Man.rev.1 Installation and Setting-Up Instructions Contents : 1 TECHNICAL DATA 2 CONSTRUCTION AND OPERATION 3 INSTALLATION 4 SETTING-UP 5 MAINTENANCE DOCUMENTS Technical Specifications : G345 Installation

More information

Smart Pressure Transmitter

Smart Pressure Transmitter DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200

More information

Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases

Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,

More information

2600T Series Pressure Transmitter

2600T Series Pressure Transmitter Data Sheet 2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute standard overload Base accuracy: ±0.15 % Span limits 0.3 to 60000kPa; 1.2inH 2 O to 8700psi 0.3 to 3000kPa abs; 2.25mmHg

More information

Metal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam

Metal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,

More information

DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.

DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0. DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals

More information

Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250

Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known

More information

Pressure transmitter PASCAL CV4

Pressure transmitter PASCAL CV4 Pressure transmitter PASCAL CV4 with threaded connection, Type series CV4100 Features Application area Pharmaceutical industry Food industry Biotechnology General process technology Compact case of stainless

More information

SATRON VDt differential pressure transmitter. Installation and Setting-Up Instructions Spare Parts List

SATRON VDt differential pressure transmitter. Installation and Setting-Up Instructions Spare Parts List M, revision 4 Installation and Setting-Up Instructions Spare Parts List Contents: INSTALLATION. Mechanical installation. Electrical connections SETTING UP. Using the Hart 75 user interface. Setting up

More information

Safir-M digital. Features. LCD indicator and controls. Industries. Applications

Safir-M digital. Features. LCD indicator and controls. Industries. Applications Features Reference accuracy, % FS 0.1 0.15 0.25 0.5 (draft pressure) Turndown 1:25 Output 4 20 ma, 0 5 ma Linear (increasing or decreasing) Square root (differential pressure) Damping (optional), s 0.5

More information

Differential pressure transmitter PASCAL Ci4 Delta P

Differential pressure transmitter PASCAL Ci4 Delta P Differential pressure transmitter PASCAL Ci4 Delta P for diaphragm seal operation, Type series CI4330 Features Application area General process engineering Chemical and petrochemical industry General process

More information

DCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor

DCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor DCT 5 Industrial Pressure Transmitter with IO-Link Interface Stainless Steel Sensor accuracy according to IEC 60770: standart: ± 0.5 % FSO sption: ± 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0...

More information

OEM Pressure Transmitters

OEM Pressure Transmitters OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma

More information

Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids

Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement

More information

Beck. The differential pressure transmitter for air with IP65

Beck. The differential pressure transmitter for air with IP65 Beck. The differential pressure transmitter for air with IP65 Differential pressure transmitter 985 with IP65 General description The differential pressure transmitters of the 985 series are used to measure

More information

Pressure transmitter for marine applications Type MBS 5100 and MBS 5150

Pressure transmitter for marine applications Type MBS 5100 and MBS 5150 Data sheet Pressure transmitter for marine applications Type MBS 5100 and MBS 5150 The ship approved high accuracy block pressure transmitter is designed for use in almost all marine applications. MBS

More information

Differential pressure transmitter PASCAL Ci4 Delta P

Differential pressure transmitter PASCAL Ci4 Delta P Differential pressure transmitter PASCAL Ci4 Delta P for general application, Type Series CI4300 Features Differential pressure transmitter with metallic diaphragm High-resolution graphic display with

More information

Smart Pressure Transmitter

Smart Pressure Transmitter DOC. O.: C3700-L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3700-L 298-29, GODA-RO, GUPO-SI, GYEOGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,

More information

Pressure transducer DMU 01K Compact version

Pressure transducer DMU 01K Compact version Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,

More information

Smart Pressure Transmitter

Smart Pressure Transmitter DOC. NO.: C3200L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3200L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200

More information

JUMO MIDAS S07 MA. OEM Pressure Transmitter - Maritime Approved. Applications. Brief description. Special features.

JUMO MIDAS S07 MA. OEM Pressure Transmitter - Maritime Approved. Applications. Brief description. Special features. Page /0 JUMO MIDAS S07 MA OEM Pressure Transmitter - Maritime Approved Applications In the shipping and offshore sector: HVAC (heating, ventilating, and air conditioning) Refrigeration engineering Compressors

More information

Differential Pressure Sensors

Differential Pressure Sensors 1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output

More information

Metal tube variable area flowmeter for gases, liquids and steam

Metal tube variable area flowmeter for gases, liquids and steam Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,

More information

CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media

CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media FEATURES mbar to 35 bar, 15 to 500 psi gage 1 or absolute 10 pressure 05, 010, 0545, 16 or 420 ma output Field interchangeable All welded stainless steel diaphragm construction EMC according to EN 61326-1

More information

ETP80. Electronic Transmitter for Pressure, Differential Pressure and Level

ETP80. Electronic Transmitter for Pressure, Differential Pressure and Level ETP80 Electronic Transmitter for Pressure, Differential Pressure and Level The ETP80 is a series of pressure transmitters with a wide range of s to suit most applications. The transmitters can measure

More information

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø

More information

DMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.

DMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter. TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet

More information

ORIMAS Mass Flowmeter

ORIMAS Mass Flowmeter Typical Applications ORIMAS Mass Flowmeter The ORIMAS mass flow meters measure the mass flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical

More information

Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids

Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Suitable for all kind of liquids Viscosity up to 120000 mpa s Excellent performance with changing process conditions

More information

JUMO MIDAS C18 SW. OEM pressure transmitter - seawater. Applications

JUMO MIDAS C18 SW. OEM pressure transmitter - seawater. Applications Delivery address: Mackenrodtstraße 4 Phone: +49 66 600-0 Fax: +49 66 600-607 Phone: +44 79 655 Fax: +44 79 656 Data Sheet 400 Page /6 JUMO MIDAS C8 SW OEM pressure transmitter - seawater Applications Water

More information

The EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric.

The EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric. Typical Applications EPSILON Flowmeter The EPSILON flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and the power

More information

OEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250

OEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250 Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme

More information

DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor

DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600

More information

Pressure Transmitter JUMO dtrans p30 Type

Pressure Transmitter JUMO dtrans p30 Type JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 e-mail: mail@jumo.net Internet: www.jumo.net JUMO

More information

Differential Pressure and Flow meters Accessories for the Media Series

Differential Pressure and Flow meters Accessories for the Media Series Differential Pressure and Flow meters Accessories for the Media Series 7 8 9 10 11 6 12 Media 5 Media 6 Media 05 1 5 2 4 Media 4 3 Selection and application These accessories upgrade the devices of the

More information

Industrial Pressure Transmitters

Industrial Pressure Transmitters Industrial Pressure Transmitters Type S-10, S-11 Applications Hydraulics and pneumatics Test equipment Pump and compressor control Liquid level measurement Special Features Standard ranges available from

More information

JUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see "Technical data")

JUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see Technical data) Page 1/15 JUMO dtrans p20 Process pressure transmitter Brief description The device with the HART interface combines maximum precision with simple operation. It is used to measure the system pressure of

More information

DPT 200. Differential Pressure Transmitter for Process Industry with HART -Communication. accuracy according to IEC 60770: 0.

DPT 200. Differential Pressure Transmitter for Process Industry with HART -Communication. accuracy according to IEC 60770: 0. Differential Pressure Transmitter for Process Industry with HART Communication accuracy according to IEC 60770: 0.075 % FSO Differential pressure from mbar up to 0 bar Static pressure max. Output signal

More information