BFS-10-O G1/4: BFS-10-O G1/2: BFS-10-O G1: Contact rating: BFS-10-O G1/4
|
|
- Aldous Bryan
- 6 years ago
- Views:
Transcription
1 Flow Switches Index: B / BFS-10-N / BFS-10-O for monitoring liquids, with or without optical display Features set point continuously adjustable rugged, low hysteresis, any mounting position, high accuracy and functional safety Measuring ranges 0, ,06 l/min to l/min for water Applications Measuring and monitoring of liquids, e. g. in cooling systems, test beds, pumps etc. BFS-10-N (without indication) Measuring principle: Var. aera flow meter: Housing: Magnets: BFS-10-N G1/4: BFS-10-N G1/2: BFS-10-N G1: version, nickel-plated, nickel-plated PN 300 bar PN 300 bar PN 250 bar Accuracy: ±10% f. s. SS 350 bar 350 bar 300 bar 100 C (standard), 160 C (option HT) Pressure drop 0,02...0,2 bar 0,02...0,3 bar 0,02...0,4 bar Electrical connection: plug acc. to DIN EN (DIN BFS-10-N G1/4 BFS-10-N G1/2 BFS-10-N G1 (water in l/min) 200 V / 1 A / 20 VA 200 V / 1 A / 20 VA 230 V / 3 A / 60 VA IP65 (plug acc. to DIN EN formaly DIN e.g. ATEX, see BFS-10-N G1/4: BFS-10-N G1/2: BFS-10-N G1: 0, ,06 0,02...0, ,04...0,13 0,2...0, ,1...0,6 0,4...1, ,2...1,2 0,8...3, ,4...2,0 2,0...7, ,5...3,0 3, ,0...5,0 4, , BFS-10-O (with optical indication) Measuring principle: Var. aera flow meter: Display Housing: Glass: Magnets: BFS-10-O G1/4: BFS-10-O G1/2: BFS-10-O G1: version, nickel-plated alumin., anodized Duran 50 PN 16 bar PN 16 bar PN 10 bar Accuracy: ±10% f. s. Electrical connection: BFS-10-O G1/4 BFS-10-O G1/2 BFS-10-O G1 (water in l/min) alumin., anodized Duran 50 SS 16 bar 16 bar 10 bar 100 C (standard), 160 C (option HT) Pressure drop 0,02...0,2 bar 0,02...0,3 bar 0,02...0,4 bar plug acc. to DIN EN (formaly DIN 200 V / 1 A / 20 VA 200 V / 1 A / 20 VA 230 V / 3 A / 60 VA IP65 (plug acc. to DIN EN formaly DIN e.g. ATEX, see BFS-10-O G1/4: BFS-10-O G1/2: BFS-10-O G1: 0, ,06 0,2...0,5 8,0 20 8, , ,13 0,3...1,0 9, ,1...0,6 0,7 2, ,2...1,2 1,6...4, ,4...2,0 3,0...8,0 0,5...3,0 4, ,0...5,0 6,0 15 Barksdale Subject to technical changes. 1
2 Flow Switches Flow BFS-10-N / BFS-10-O Dimensions (mm / inch) Order Numbers BFS-10-N BFS-10-O Brass Brass BFS-10-N-G1/4-MS-NO-ST BFS-10-O-G1/4-MS-NO-ST BFS-10-N-G1/4-MS-WE-ST BFS-10-O-G1/4-MS-WE-ST BFS-10-N-G1/2-MS-NO-ST BFS-10-O-G1/2-MS-NO-ST BFS-10-N-G1/2-MS-WE-ST BFS-10-O-G1/2-MS-WE-ST BFS-10-N-G1-MS-NO-ST BFS-10-O-G1-MS-NO-ST BFS-10-N-G1-MS-WE-ST BFS-10-O-G1-MS-WE-ST Stainless Steel Stainless Steel BFS-10-N-G1/4-SS-NO-ST BFS-10-O-G1/4-SS-NO-ST BFS-10-N-G1/4-SS-WE-ST BFS-10-O-G1/4-SS-WE-ST BFS-10-N-G1/2-SS-NO-ST BFS-10-O-G1/2-SS-NO-ST BFS-10-N-G1/2-SS-WE-ST BFS-10-O-G1/2-SS-WE-ST BFS-10-N-G1-SS-NO-ST BFS-10-O-G1-SS-NO-ST BFS-10-N-G1-SS-WE-ST BFS-10-O-G1-SS-WE-ST Order number example: Order number + switching range = , 2,0...7,0 l/min Description NO = normally open O = with indication MS = WE = change-over N = without indication SS = stainless steel Please specify switching range (see table on page previous) additional to order number. 2 Subject to technical changes. Barksdale
3 Index: A / Flow Switches BFS-20-O / BFS-20-OL for liquids from 30 up to 600 cst with optical display Features viscosity compensated from 30 to 600 cst, set point continuously adjustable, rugged, low hysteresis, any mounting position, high accuracy and functional safety, with 1/2" connection also available as low cost version Measuring ranges 0,1... 0,8 l/min to l/min for liquids up from 30 to 600 cst. Applications Measuring and monitoring of liquids, e. g. in cooling or hydraulic systems, test beds, pumps etc. BFS-20-O BFS-20-OL Measuring principle: Measuring principle: Flow meter: Display Housing: Glass: Magnets: version, nickel-plated alumin, anodized Duran 50 alumin, anodized Duran 50 Flow meter: Display Housing: Glass: Magnets: version, nickel-plated, nickel-plated alumin, anodized Duran 50 alumin, anodized Duran 50 BFS-20-O: PN 10 bar VA 10 bar BFS-20-OL: PN 16 bar VA 16 bar 120 C (standard), 160 C (option HT) 120 C (standard), 160 C (option HT) Accuracy: ±10% f. s. Accuracy: ±10% f. s. Electrical connection: plug acc. to DIN EN C (Ex DIN Electrical connection: plug acc. to DIN EN C (Ex DIN BFS-20-O G1 Pressure drop 0,02...0,4 bar BFS-20-OL G1 Pressure drop 0,2...0,4 bar IP65 (plug acc. to DIN EN C - Ex DIN IP65 (plug acc. to DIN EN C - Ex DIN e.g. ATEX, see e.g. ATEX, see (air in Nl/min) BFS-20-O G1/4: in l/min BFS-20-O G1/2: BFS-20-O G3/4: BFS-20-O G1: 0,5 1,5 BFS-20-OL G1/2: 0,5 1,7 1,0 4,0 1,3 4,0 2,0 8 2,5 8,0 3,0 10 5,0 15 8, Barksdale Subject to technical changes. 1
4 Flow Flow Switches BFS-20-O / BFS-20-OL Dimensions (mm / inch) Order Code BFS-20-O BFS-20-OL Brass Brass BFS-20-O-G1-MS-NO-ST BFS-20-OL-G1/2-MS-NO-ST BFS-20-O-G1-MS-WE-ST BFS-20-OL-G1/2-MS-WE-ST Stainless Steel Stainless Steel BFS-20-O-G1-SS-NO-ST BFS-20-OL-G1/2-SS-NO-ST BFS-20-O-G1-SS-WE-ST BFS-20-OL-G1/2-SS-WE-ST The version BFS-20-O is also available with process connections, please see table on side before. To place an order please add the process connection to the order number. Order number example: Order number + switching range = , 3 10 l/min Description NO = normally open O = with indication MS = WE = change-over N = without indication SS = stainless steel 2 Subject to technical changes. Please specify switching range (see table on page previous) additional to order number. Barksdale
5 Index: C / Flow Switches BFS-40-N / BFS-40-O or water monitoring,with or without optical display Features large switching range, set point continuously adjustable, rugged, low hysteresis, any mounting position, high accuracy and functional safety, optional with pointer-indicating instrument, ship approvals available for N-versions Measuring ranges 0,2...4,0 l/min to l/min for water Applications Measuring and monitoring of liquids, e. g. in cooling or hydraulic systems, test beds, pumps etc. BFS-40-N (without optical indication) BFS-40-O (with optical indication) Measuring principle: Measuring principle: Var. aera flow meter: Housing: version, nickel-plated, nickel-plated Var. aera flow meter: Housing: Display Housing: version, nickel-plated, nickel-plated makrolon makrolon BFS-40-N 200 bar VA 300 bar BFS-40-O: 200 bar VA 300 bar 100 C (standard), 160 C (option HT) 100 C (standard), 160 C (option HT) Accuracy: ±5% f. s. Accuracy: ±5% f. s. Electrical connection: plug acc. to DIN EN C (Ex DIN Electrical connection: plug acc. to DIN EN C (Ex DIN BFS-40-N GL 100 bar Pressure drop 0,02...0,8 bar BFS-40-O IP65 (plug acc. to DIN EN C - Ex DIN e.g. ATEX, GL, BV,...see IP65 (plug acc. to DIN EN C - Ex DIN see in l/min in l/min BFS-40N G1/4: Pressure drop 0,02...0,8 bar BFS-40N G1/2: BFS-40N G3/4: BFS-40N G1: BFS-40- BFS-40N G1 1/4: N G1 1/2: BFS-40O G1/4: BFS-40O G1/2: 0,2 4,0 0,2 4,0 0,5 8,0 0,5 8,0 0,6 5,0 0,6 5,0 1,0 14 1,0 14 1,0 28 1,0 28 BFS-40O G1: BFS-40- BFS-40O G1 1/4: O G1 1/2: 2,0 40 2,0 40 4,0 55 4,0 55 1,0 70 1,0 70 8,0 90 8,0 90 5, , Barksdale BFS-40O G3/4: Subject to technical changes
6 Flow Flow Switches BFS-40-N / BFS-40-O Dimensions (mm / inch) Pressure Drop Diagram Wiring Diagrams Order Numbers Order numbers on request 2 Subject to technical changes. Barksdale
7 Flow Switches Index: C / BFS-30-N / BFS-30-O or liquids from 30 up to 600 cst, with or without optical display Features viscosity compensated from 30 up to 600 cst, set point continuously adjustable, rugged, low hysteresis, any mounting position, high accuracy and functional safety, optional with pointer-indicating instrument, ship approvals available for N-versions Measuring ranges l/min to l/min for liquids from 30 up to 600 cst. Applications Measuring and monitoring of liquids, e. g. in cooling or hydraulic systems, test beds, pumps etc. BFS-30-N (without indication) Measuring principle: Flow meter: Housing: BFS-30-N, N E: BFS-30-L: version, nickel-plated, nickel-plated 250 bar 300 bar Accuracy: ±10% f. s. Electrical connection: BFS-30-L BFS-30-N, N E GL 100 bar 100 bar VA 300 bar 350 bar 120 C (standard), 160 C (option HT) Press.drop 0,02...0,4 bar 0,02...0,2 bar plug acc. to DIN EN (Ex DIN 230 V / 3 A / 60 VA IP65 (plug acc. to DIN EN Ex DIN e.g. ATEX, GL, BV,...see versions water in l/min Process connections BFS-30-L: BFS-30-N: BFS-30-N E: 0,5 1,6 0,8 3,0 / 2,0 7,0 0,5...1,5 / 1,0...4,0 2,0...8,0 / 3, , / 8, / / , / 4, , / 8, / G1/2 G1 BFS-30-O (with optical indication) Measuring principle: Flow meter: Housing: Display Housing: BFS-30-O, O E: version, nickel-plated, nickel-plated Makrolon 250 bar Accuracy: ±10% f. s. Electrical connection: BFS-30-O, O E Makrolon VA 300 bar 120 C (standard), 160 C (option HT) Press. drop 0,02...0,4 bar plug acc. to DIN EN (Ex DIN IP65 (plug acc. to DIN EN Ex DIN see versions water in l/min Process connection BFS-30-O: BFS-30-O E: 0,5...1,5 / 1,0...4,0 2,0...8,0 / 3, , / 8, / / , / 4, , / 8, / G1 G1 Barksdale Subject to technical changes. 1
8 Flow Flow Switches BFS-30-N / BFS-30-O Dimensions (mm / inch) Order Code Brass Description Stainless Steel Description BFS-30-L-G1/2-MS-NO-ST BFS-30-L-G1/2-SS-NO-ST BFS-30-N-G1-MS-NO-ST BFS-30-N-G1-SS-NO-ST BFS-30-NE-G1-MS-NO-ST BFS-30-NE-G1-SS-NO-ST BFS-30-O-G1-MS-NO-ST BFS-30-O-G1-SS-NO-ST BFS-30-OE-G1-MS-NO-ST BFS-30-OE-G1-SS-NO-ST BFS-30-L-G1/2-MS-WE-ST BFS-30-L-G1/2-SS-WE-ST BFS-30-N-G1-MS-WE-ST BFS-30-N-G1-SS-WE-ST BFS-30-NE-G1-MS-WE-ST BFS-30-NE-G1-SS-WE-ST BFS-30-O-G1-MS-WE-ST BFS-30-O-G1-SS-WE-ST BFS-30-OE-G1-MS-WE-ST BFS-30-OE-G1-SS-WE-ST Brass Process connection Stainless Steel Process connection / / / / / /4 Adapter Order number example: Order number + switching range = , 0,8...3,0 l/min Description NO = normally open NE = without indication, enlarged meas. range WE = change-over OE = with indication enlarged meas. range Please specify switching range (see table on page previous) additional SS = stainless steel to order number. MS = L = without indication, low cost O = with indication N = without indication 2 Subject to technical changes. Barksdale
9 Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight, no contact between process fluid and switching, indicator or transmitter systems Suitable for installation in horizontal or vertical pipes Robust construction Scales available for H 2 O, air, oil, etc. (series AD) Flow rate (for liquids): - Series AD: l/min - Series VH: m 3 /h Accuracy for series AD: ±5% f.s. Connections: - Series AD: ¼... 2½ BSP / NPT - Series VH: G1 / 1 NPT, to be inserted on a DN32... DN500 pipe - Series AD: EN (SS 316L), aluminium, - Series VH: EN (SS 316L), PTFE Flow switching: - 1 reed switch (series AD & VH) - 2 reed switches (only series AD) - 1 or 2 inductive switches (only series AD) All switches for series AD are ATEX Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da certified Options for model ADI15: - Local flow indication - Electronic transmitter with 4-20 ma output for safe or hazardous area (Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da protection, ATEX certified). HART TM protocol available on request
10 Series AD Working principle A spring M keeps a disk B in zero flow rate position. When the fluid flows through the disk at a specific speed, a force is made on the disk B, moving it to an equilibrium position. The distance covered by B depends on: - The force of the fluid flow F. - The relationship between areas A & B. - The force in opposition of the spring C. The equilibrium between forces F and the one generated by C defines the position of the disk B, equivalent to flow rate. The disk B, which contains a magnet M, acts over the switches and/or the local indicator. Applications Machine or processes cooling Hydraulic and lubrication circuits Thermal oil circuits Gas flow control Mechanical fasteners cooling control Technical data Accuracy: ±5% full scale Scale range: according to flow rate chart on page 4 Scales in l/h, l/min, l/s, m 3 /h, %, etc. Vertical or horizontal mounting, as per customer s request Connection: ¼... 2½ BSP / NPT Brass from ¼ to 2 Aluminium from 1 ¼ to 2 ½ EN (SS 316L) on request Fluid temperature: continuous 100ºC (max. allowable 120ºC) Working pressure: PN16 (others on request) Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da ATEX certificate Operation - Vertical flow: upwards (BD) downwards (DAB) - Horizontal flow: left to right (ED) right to left (DES) Limit switches and transmitters Reed switches: SPDT potential free. Polyamide housing and IP65 connector /1A = 1 reed switch /2A = 2 reed switches Reed switch technical data: - ADR01: for sizes ¼ & ½ : 0,25 A 175 VDC 5 W - ADR11: for sizes ¾ to 2½ : 1 A 250 V 60 VA M1-AMD1... 2: adjustable inductive switches (+ relays on request) TH6... TH6H: 4-20 ma 2-wire transmitter HART TM protocol for model TH6H All switches and transmitters are ATEX available Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da version Models AD15: with one or two reed switches ADI15: local flow indication optionally with: - one or two reed switches - one or two inductive switches ma transmitter Transmitter TH6 2
11 Materials ¼ ¼... 2½ Nº Description ¼ ¼... 2 ½ 1 Body Brass / SS 316L / Anodized aluminium * 2 Disk 3 Magnet Ferrite ** 4 Switch Polycarbonate - PVC - NBR 5 Washer SS 316L 6 Spring SS Housing Polycarbonate - Coated aluminium 8 Screw SS Gasket NBR *** * Materials available for each size: ¼... 1 :, SS 316L 1 ¼ 2 :, SS 316L, anodized aluminium 2 ½ : SS 316L, anodized aluminium ** magnet with plastic coating for applications with corrosive liquids on request *** other materials on request 3
12 Dimensions Flow ranges R (BSP / NPT) Flow scales l/min water AD15 ADI15 ¼ ½ ¾ " ¼" ½ " ½" *Equivalent flow ranges for air at 1 bar abs 20ºC in Nl/min: l/min H 2 O x 8 (approx.) Mounting Vertical upwards Models AD15/BD ADI15/BD ADI15+TH6 Vertical downwards Models AD15/DAB ADI15/DAB R (BSP / NPT) A B C F L Weight kg mm ¼ ½ ¾ " ¼" ½ " Ø ½" Ø Horizontal / Left to right Models Horizontal / Right to left Models AD15/ED ADI15/ED AD15/DES ADI15/DES 4
13 Model AD15 Flow switch with min-max flow rate reed switches. Vertical or horizontal mounting, as per customer s request. Adjustable reed switch for the full flow scale, mounted in a polyamide housing, IP65 ingress protection. Flow scale in l/h, l/min, l/s, m 3 /h, %, etc. Model ADI15 Local flow indicator, with optional min-max flow rate reed switches, adjustable for the full flow scale and mounted in an IP65 polyamide housing; and/or adjustable inductive switches, mounted in the indicator housing. Vertical or horizontal mounting, as per customer s request. Aluminium indicator housing with polycarbonate cover, IP65 ingress protection, graduated scale in flow rate units, reading by means of indicating needle. Flow and reed switch scale in l/h, l/min, l/s, m 3 /h, %, etc. Model ADI15 + TH6 Same characteristics as model ADI15, including electronic transmitter with 2-wire 4-20 ma output. Limit switches and transmitters Adjustable limit switch M1-AMD Optional for model ADI15. NAMUR (EN ) 3.5 mm slot type inductive detector activated by vane, mounted in the indicator housing. M1-AMD1 2: 1 2 adjustable limit switches Power supply: 8 VDC Ambient temperature: -25 C C ATEX certification Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da Control relay (on request) NAMUR (EN ) for 1 or 2 inductive detectors. Power supply: VAC Hz VDC Input: NAMUR Ex ia IIC Output: 1 or 2 relay contacts Output rating: 2 A 250 VAC 100 VA / 1 A 24 VDC Ambient temperature: -20 C C Transmitter TH ma Power supply: 2-wire system, VDC Power consumption: max. 20 ma Analog output (4-20 ma): - Error: < 0,6% of the magnet position - Maximum load in 4-20 ma loop: 1.1 kω (with 36 VDC power supply) Ambient temperature: -5ºC ºC Transmitter connector: Packing gland M12x1.5 Optional: ATEX certification Ex ia IIC T4...T6 Ga / Ex ia IIIC T85ºC Da, with model TH6 Ex Optional: HART TM protocol, with model TH6H 5
14 Series VH Working principle A liquid flows inside a pipe fast enough to move a paddle, which at the same time moves a permanent magnet that acts over the reed switch. The magnet-reed switch system is isolated from the liquid. The flow switching point is positioned between 30º and 45º from the zero position. Materials Applications Flow rate control in hydraulic and heating-cooling circuits Chemical and petrochemical industry Water treatment, power plants and pulp & paper industry Swimming pools & fire protection systems Technical data Flow detection by means of oscillating paddle SPDT potential free reed switch, mounted in the body, not wetted by the liquid Mounting: horizontal or vertical upwards pipe Connection: G1 (1 NPT on request) EN (SS 316L), PTFE others on request Fluid temperature: continuous -40ºC ºC (max. allowable 150ºC) Working pressure: - SS 316L body: PN25 (others on request) - PTFE body: PN10 Operation - Vertical upwards flow (BD) - Horizontal flow: left to right right to left Models VH35 / SS... PTFE: for horizontal pipe VH37 / SS BD: for vertical pipe with upwards flow, with spring VH39 / PTFE BD: for vertical pipe with upwards flow, with magnetic spring Limit switch Reed switch: potential free switch Maximum switching power: 5W Maximum switching voltage: 175 VDC Maximum switching current: 0.25 A Electrical connection: connector IP65 DIN A Simple apparatus according to EN standard. Intrinsically safe i protection for ATEX hazardous areas Nº Description VH / SS VH / PTFE 1 Connector Polyamide 2 Screw SS Gasket NBR 4 Connector base Polyamide 5 Gasket NBR 6 Spring SS Body SS 316L PTFE 8 Magnet holder PVDF PTFE 9 Reed switch Glass 10 Pin SS 316 PTFE 11 Paddle SS 316L PTFE 6
15 Dimensions Switching flow rates DN mm DN inch Switching flow rate (1) m³/h L mm 32 1 ¼ ½ ½ (1) Approximate flow rates Mounting Horizontal / left to right or right to left: model VH35 VH35 / SS VH35 / SS VH35 / PTFE Vertical upwards: model VH37 / 39 BD VH37 / SS BD VH35 / PTFE VH39 / PTFE BD 7
16 ...presence in more than 50 countries around the world Quality Assurance System ISO 9001 certified by Pressure Equipment Directive 97/23/CE certified by ATEX Directive 94/9/CE certified by R-CT-ADVH Rev. 0 english version
17 Flow Switches Index: A / Type BFS-10-N-AIR / BFS-10- O-AIR for monitoring volume flow of gaseous media, with or without optical display Features set point continuously adjustable, rugged, low hysteresis, any mounting position, high accuracy and functional safety Measuring ranges 0,2...1,3 Nl/min to Nl/min for air Applications Measuring and monitoring of gaseous media, e. g. in cooling systems, test beds, pumps etc. BFS-10-N-AIR (without indication) Measuring principle: Var. aera flow meter: Housing: Magnets: BFS-10-N G1/4: BFS-10-N G1/2: BFS-10-N G1: version, nickel-plated, nickel-plated PN 300 bar PN 300 bar PN 250 bar Accuracy: ±10% f. s. Electrical connection: BFS-10-N-AIR G1/4 BFS-10-N-AIR G1/2 BFS-10-N-AIR G1 (air in Nl/min) VA 350 bar 350 bar 300 bar 100 C (standard), 160 C (option HT) Pressure drop 0,02...0,2 bar 0,02...0,3 bar 0,02...0,4 bar plug acc. to DIN EN C (Ex DIN 200 V / 1 A / 20 VA 200 V / 1 A / 20 VA 230 V / 3 A / 60 VA IP65 (plug acc. to DIN EN C - Ex DIN e.g. ATEX, see BFS-10-N-AIR G1/4: BFS-10-N-AIR G1/2: BFS-10-N-AIR G1: 0,6 2,2 2, ,7 6,0 5, ,5 8,0 8, , , , BFS-10-O-AIR (with optical indication) Measuring principle: Var. aera flow meter: Display Housing: Glass: Magnets: BFS-10-O G1/4: BFS-10-O G1/2: BFS-10-O G1: version, nickel-plated alumin., anodized Duran 50 PN 16 bar PN 16 bar PN 10 bar Accuracy: ±10% f. s. Electrical connection: BFS-10-O-AIR G1/4 BFS-10-O-AIR G1/2 BFS-10-O-AIR G1 (air in NL/min) for: alumin., anodized Duran 50 VA 16 bar 16 bar 10 bar 100 C (standard), 160 C (option HT) Pressure drop 0,02...0,2 bar 0,02...0,3 bar 0,02...0,4 bar plug acc. to DIN EN C (Ex DIN 200 V / 1 A / 20 VA 200 V / 1 A / 20 VA 230 V / 3 A / 60 VA IP65 (plug acc. to DIN EN C - Ex DIN e.g. ATEX, see BFS-10-O-AIR G1/4: BFS-10-O-AIR G1/2: BFS-10-O-AIR G1: 0,2 1,3 5,5 20 3, ,5 80 0,5 2,0 7,0 24 7, ,8 3, ,5 5, ,0 8, , , Barksdale Subject to technical changes. 1
18 Flow Switches Flow Type BFS-10-N-AIR / BFS-10- O-AIR Dimensions (mm / inch) Order Code BFS-10-N-AIR Brass BFS-10-O-AIR Brass BFS-10-N-G1/4-MS-NO-ST BFS-10-O-G1/4-MS-NO-ST BFS-10-N-G1/4-MS-WE-ST BFS-10-O-G1/4-MS-WE-ST BFS-10-N-G1/2-MS-NO-ST BFS-10-O-G1/2-MS-NO-ST BFS-10-N-G1/2-MS-WE-ST BFS-10-O-G1/2-MS-WE-ST BFS-10-N-G1-MS-NO-ST BFS-10-O-G1-MS-NO-ST BFS-10-N-G1-MS-WE-ST BFS-10-O-G1-MS-WE-ST Stainless Steel Stainless Steel BFS-10-N-G1/4-SS-NO-ST BFS-10-O-G1/4-SS-NO-ST BFS-10-N-G1/4-SS-WE-ST BFS-10-O-G1/4-SS-WE-ST BFS-10-N-G1/2-SS-NO-ST BFS-10-O-G1/2-SS-NO-ST BFS-10-N-G1/2-SS-WE-ST BFS-10-O-G1/2-SS-WE-ST BFS-10-N-G1-SS-NO-ST BFS-10-O-G1-SS-NO-ST BFS-10-N-G1-SS-WE-ST BFS-10-O-G1-SS-WE-ST Order number example: Order number + switching range = , l/min Description NO = normally open O = with indication MS = Please specify switching range (see table on page WE = change-over N = without indication SS = stainless steel previous) additional to order number. 2 Subject to technical changes. Barksdale
Flow switches Series AD/VH
Flow switches Series AD/VH Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling,
More informationMetal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam Metallic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in
More informationMetal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
More informationGlass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
More informationMetal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam
Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,
More informationOrifice plate flowmeters Series PR By-pass flowmeter for liquids, gases and steam
Orifice plate flowmeters Series PR By-pass flowmeter for liquids, gases and steam By-pass flowmeter with orifice plate (compact system PRC and separate system PR) for big flow ranges Flow indication by
More informationLevel switches Series LC40 Float level switch for liquids
Level switches Series LC40 Float level switch for liquids Simple and robust construction Versatile and easily adaptable to the different control positions of the industrial processes Side or top of the
More informationFLOW. control. switch measure. Flow Switches
FLOW Flow Switches control switch measure Introduction Operation, areas of application...3 Switching range and switch point adjustment...4 Switch hysteresis, features...4 Maintenance instructions...4 08
More informationOscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids
Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Suitable for all kind of liquids Viscosity up to 120000 mpa s Excellent performance with changing process conditions
More informationPlastic tube variable area flowmeter for liquids and gases
Plastic tube variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding connections)
More informationFlowmeters with Float. Flow Measurement of Gases & Clear Liquids with Float Series 6001 & Series 6001/ Measurement Principle.
Flowmeters with Float Series 6001/ 6002 Flow Measurement of Gases & Clear Liquids with Float Series 6001 & 6002. Measurement Principle Variable area obtained by the displacement of a float in a conical,
More informationTurbine flowmeters Series TM
Turbine flowmeters Series TM Suitable for liquids Possibility of installation in all flow directions Special design for high pressure available Excellent relationship flow range / flowmeter size Low pressure
More informationElectromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement
More informationInstructions Manual. Target Disk Flow meter DP-65 / DP-500. Series DP-65 DP-500. instrumentation for fluids
instrumentation for fluids Target Disk Flow meter Series DP-65 / DP-500 Instructions Manual DP-65 DP-500 The following instruction manuals are enclosed: AMM Limit Switch Instruction manual AMD Limit Switch
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationFlap-Type Flow Meter Prall
Suitable for H 2 O, acids, alkaline solutions and gases Spring-loaded flap Horizontal or vertical direction of flow Largely independent of viscosity Limit contacts, optional Analog output 4 20 ma, optional
More informationDesign and application
Design and application The function of the SGM is based on the variable area float principle. In all cases where a dependable device is required for indicating instantaneous values and monitoring the flow
More informationINLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1
INLINE Flow sensor for hazardous area II G/D - II D - II GD - I M Type SE0 Ex can be combined with... Flow meter with NAMUR or NPN/PNP output signal Mounting, dismounting of electronics by a Quarter-Turn
More informationMagnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF)
Level measurement Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF) TC Fluid Control WIKA data sheet LM LM 3001 30.01 for further approvals see page 3 Applications
More informationBGN. All Metal Variable Area Flow Meter. Technical Data Sheet
All Metal Variable Area Flow Meter BGN Technical Data Sheet Extremely robust through star guiding system instead of guiding rod Flow metering of liquids, gases and steam Available up to nominal size of
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
More informationElectromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids Flow rate measurement is independent of density, temperature, viscosity and pressure Pulsed coil excitation to
More informationShipbuilding solutions
Shipbuilding solutions Level Flow Pressure Worldwide solutions Hundreds of thousands of Trimod Besta level switches ensure the safe voyage of vessels on our oceans Since 1967 the Shipbuilding industry
More informationDMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationIntrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
More informationAbsolute pressure gauge with diaphragm
Absolute pressure gauge with diaphragm and switch function,type series BF2 Features Absolute pressure gauge with diaphragm and switch function Nominal ranges 0 60 mbar abs to 0 2500 mbar abs With integrated
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationOPTISWITCH 4000/5000. Vibration level switches for liquids
OPTISWITCH 4000/5000 Technical Datasheet Vibration level switches for liquids Operates up to 250 C / 480 F and 64 bar / 925 psi Pump dry-run detection High reliability due to permanent fault monitoring
More informationFor industrial applications For marine applications With proximity switch. Piston type flow switches
JJ For industrial applications JJ For marine applications JJ With proximity switch Piston type flow switches DB_Piston_type_flow_switches 01/2016 199 Piston type flow switches Piston type flow switches
More informationMagnetic-inductive flow meter for hazardous areas
Magnetic-inductive flow meter for hazardous areas Technical Datasheet EPX / UMF3 high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials
More informationDMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
More informationModel Connections Max. Flow Range (H 2 O) 10A A3220 Horizontal ¼ NPT 100 l/h. 10A3225/55 Vertical ¼ NPT 100 l/h. Vertical 1 NPT Vertical 1 G
Data Sheet Field IT Variable Area Flowmeters Armored Purgemeter 10A3200 n n n Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases.
More informationSATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More informationElectropneumatic positioner APIS
Electropneumatic positioner APIS HART protocol ATEX certificate II 2G Exia IIC T6/T5 Gb II 2G Exia IIC T6/T5/T4 Gb version with Hart Simple in installation and programming Possibility of remote assembling
More informationFluid Power Fluid Power
Fluid Power Fluid Power Control Control every move Barksdale State-of-the-Art Solutions Barksdale State-of-the-Art Solutions Today s markets demand flexible and dynamic suppliers of innovative products,
More informationDifferential-Pressure Flow Meter
Design and application The metering orifice measures and monitors the flow rate of liquids. The user mounts the orifice between flanges or with Rp screwed connections into the conduit. The unimpeded, straight
More informationSATRON VT Pressure Transmitter
SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring
More informationPlastic Flow Meters for gases & liquids, using TROGAMID* & POLYSULFONE Technology
Plastic Flow Meters for gases & liquids, using TROGAMID* & POYSUFONE Technology Applications Monitoring & Control of processes for: Water & Waste Water Treatment Chemical, Petrochemical & Paper Pharmaceutical,
More informationflow switches J with pipe tees (inline) J Direct installation (insertion) J for hvac applications J with interchangeable paddles J For air flow
J with pipe tees (inline) J Direct installation (insertion) J for hvac applications J with interchangeable paddles J For air flow Including products with: UL 508 UL 353 CSA C22.2#14-10 flow switches J
More informationDG01. Flow indicator with or without rotor, with wiper for cleaning of sight glass. Flow Metering and Monitoring Systems
Flow Metering and Monitoring Systems DG01 Flow indicator with or without rotor, with wiper for cleaning of sight glass May be used for liquids and gases Compact design Available in brass and stainless
More informationLMK 387. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO
LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... mho up to 0... 00 mho Output signal -wire: 4... 0 ma Special
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationDifferential pressure gauge with diaphragm
Differential pressure gauge with diaphragm and switch function,type series BG2 Features Differential pressure gauge with diaphragm and switch function Nominal range -40...0 mbar to -1...24 bar, 0 40 mbar
More informationTORRIX Magnetostrictive level sensor
TORRIX Magnetostrictive level sensor Precision Versatility Security Sensors & Systems Worldwide: www.fafnir.com FAFNIR Quality and Satisfaction Company: Based in Hamburg, Germany, FAFNIR GmbH has over
More informationMagnetic Float Switches horizontal 1003-h
Magnetic Float Switches horizontal 1003-h Table of contents Index Table of contents 82 Description and function 83 Certificates / Approvals 84-85 Magnetic Float Switch horizontally mounted 1003-h Stainless
More informationPressure Transmitter
FCO318 Differential Pressure Transmitter Accuracy 0.25% of reading Ultra low pressure measurement Wide span adjustment 2-wire ma, 3-wire or 4-wire voltage output Two configurable relays and bi-colour LED
More informationHigh temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250
Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More informationDMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationDifferential Pressure and Flow meters Accessories for the Media Series
Differential Pressure and Flow meters Accessories for the Media Series 7 8 9 10 11 6 12 Media 5 Media 6 Media 05 1 5 2 4 Media 4 3 Selection and application These accessories upgrade the devices of the
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationApplication The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
More informationReliable - Safe - Proven!
SIKA Flow Switches SIKA Flow Switches Reliable - Safe - Proven! Our tried-and-tested flow monitoring switches are used for two basic purposes: To ensure a minimum flow rate, e.g. of cooling water or lubricating
More informationDPT 200. Differential Pressure Transmitter for Process Industry with HART -Communication. accuracy according to IEC 60770: 0.
Differential Pressure Transmitter for Process Industry with HART Communication accuracy according to IEC 60770: 0.075 % FSO Differential pressure from mbar up to 0 bar Static pressure max. Output signal
More informationPSF50 Paddle flow switch
Paddle Flow Switch Paddle Flow Switch PSF50 Paddle flow switch Paddle flap flow / no flow switch Economically priced flow/no flow paddle operated flow switch. Simple and reliable design for liquids up
More informationFLOW SWITCHES. With pipe tees (inline) Direct installation (insertion) For OEM applications Flow monitors. Including products with:
JJ With pipe tees (inline) JJ Direct installation (insertion) JJ For OEM applications JJ Flow monitors Including products with: UL 508 UL 353 CSA C22.2#14-10 FLOW SWITCHES DS_Flow_switches 05/2014 7 Reliable
More informationBM 26 BASIC/ADVANCED Technical Datasheet
BM 26 BASIC/ADVANCED Technical Datasheet Magnetic bypass Level Indicator (MLI) for generalpurpose applications Best price / performance ratio Full stainless steel construction IP68 local indicator with
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationHERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationJUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram
Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It
More informationSystem 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
More information,
Meters and Indicators 1 l/min = 0.06m3/h 1 l/min = 0.21997 UK gal/min 1 l/min = 0.26420 US gal/min 1m3/h = 16.6667 l/min 1 UK gal/min = 4.546 l/min 1 US gal/min = 3.785 l/min Meters and Indicators Meters
More informationVariable Area Flowmeters Armored Purgemeter
Data Sheet (US) Variable Area Flowmeters Armored Purgemeter 10A3200 Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases. The instrument
More informationSIKA Flow Switches -1-
SIKA Flow Switches -1- SIKA Flow Switches Reliable Safe Proven! Our tried-and-tested flow monitoring switches are used for two basic purposes: To ensure a minimum flow rate, e.g. of cooling water or lubricating
More informationGeneral Specifications
General Specifications Model RAGG Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float is mounted in
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More informationPressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
More informationV82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationGA 24 Heavy-duty variable area flowmeter
KROHNE 10/99 D 11 GA24 01 E GR Heavy-duty variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
More informationPressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
More information2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
More informationPRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER
PRESSURE PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE The PYRP-28 pressure transmitter is suitable for the measurement of pressure, vacuum and absolute pressure of gases, vapours and liquids for industrial
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationMagnetic float switch For vertical installation Model FLS
Level measurement Magnetic float switch For vertical installation Model FLS KSR data sheet FLS for further approvals see page 3 Applications Level measurement for almost all liquid media Pump and level
More informationJUMO dtrans p20 DELTA
Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision
More informationVFM4070C SWIRLMAX. Vortex Flowmeter OUTLINE FEATURES OPERATING PRINCIPLE STANDARED SPECIFICATION. General Specification. Sensor Specification
SWIRMAX VFM4070C Vortex Flowmeter OUTINE SWIRMAX is 2-wire, all-in-one type vortex flowmeter with both temperature and pressure sensors integrally mounted into the housing. It allows temperature and pressure
More informationTemperature sensor TE2
EN/2016-08-09 Design and specifications subject to change without notice Temperature sensor TE2 Temperature sensor type TE2 is a compact temperature sensor, based on RTD technology, which is designed and
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More informationData Sheet SCHISCHEK EXCOS-P. Pressure sensor 20 Pa Pa. Supplied by. .com. Call us on +44 (0)
Data Sheet SCHISCHEK EXCOS-P Pressure sensor 20 Pa... 7.500 Pa Supplied by.com Call us on +44 (0)118 916 9420 Email info@247able.com ExCos-P Pressure sensor 20 Pa... 7.500 Pa Electrical, explosion-proof
More informationExBin-P Pressure switches 5 Pa Pa
ExBin-P Pressure switches 5 Pa... 5.000 Pa Electrical, explosion-proof binary pressure / differential pressure switches 5 Pa...100 Pa with adjustable switch activation delay 24 VAC/DC supply voltage, potential
More informationSATRON VVFe Pressure Transmitter
SATRON VVFe pressure transmitter belongs to Vtransmitter family. SATRON VVFe is used for 0 4 kpa...0500 kpa ranges. It is a 2wire transmitter with HART standard communication. SATRON VVFe pressure transmitter
More informationSP/SF Series Flow Switches
ISO-9001:2000 certified SP/SF Series Flow Switches More than just another level measurement company. Aplus Finetek Sensor, Inc. PRODUCT INTRODUCTION SP SERIES OPERATING PRINCIPLE SP SERIES The SP Series
More informationDesign and applications
Design and applications The DDM-DS11 measuring system measures and monitors the flow rate of liquids and gases. The device works according to the principle of differential pressure. The differential pressure
More informationOEM Pressure transmitter for industrial applications Type MBS Technical brochure
OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat. N/en
00 / poppet valves electromagnetic actuated, directly controlled, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 8, DIN V Valves for safety systems up to SIL Solenoid valve also suitable
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More informationBM 26 BASIC/ADVANCED Technical Datasheet
BM 26 BASIC/ADVANCED Technical Datasheet Magnetic bypass Level Indicator (MLI) for generalpurpose applications Best price / performance ratio Full stainless steel construction IP 68 local indicator with
More informationKINAX SR 709 Transmitter for Position Feedback
Position transmitter with NAMUR valve fitting Application The position feedback transmitter KINAX SR 709 (Fig. 1 and 2) is used to measure and transmit linear displacement (stroke) on various types of
More information* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
More informationVersions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve
Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE
More information