Model 7A00 7A00 - TB TECHNICAL BULLETIN. Detonation Flame Arrestor
|
|
- Jesse Parks
- 5 years ago
- Views:
Transcription
1 TECHNICAL BULLETIN 7A00 - TB 0-7 ISO Registered Company Model 7A00 Detonation Flame Arrestor OBJECTIVE The Model 7A00 detonation flame arrestor is a device that can be fitted to the opening of an enclosure or to the connecting pipe work of a system of enclosures. Its primary function is to allow the flow of gases or vapor of flammable liquids through the enclosure, but prevent the transmission of a flame. The element inside the housing provides an extinguishing barrier to the ignited vapor mixture by absorbing heat from the flame. The Model 7A00 is used as an independent safety system to ensure explosion protection. TECHNIQUE 7A00 flame arrestors are designed on the principle of "quenching gap". The crimped SST metal element allows vapor to pass through in order to allow a vessel to breath, yet prevents the propagation of a flame from the exposed side to the protected side. CONSTRUCTION Housing Material: Carbon Steel, Stainless Steel. SPECIAL FEATURES The Model 7A00 is designed, manufactured, and tested according to Directive 204/34/EU (ATEX4) and ISO The element design is bidirectional and available for horizontal or vertical installations. Easy Maintenance: The Model 7A00 detonation flame arrestor is a passive device with no moving parts. The flame cell element can be easily removed for inspection and cleaning in appropriate solvent solution. Sizes: Units are available in DN20, 25, 32, 40, 50, 65, 80, 00, 25, 50, 200, 250, 300 (3/4", ", -/4", -/2", 2", 2-/2", 3", 4", 5", 6", 8", 0", 2") line sizes; thread connections according to ISO7/, BS2 or ASME B.20.. Standard for flange connections to EN092- PN0, ASME B6.5 50#RF or JIS B K. Trim Material: Stainless Steel (.457) element. Standard element is suitable for explosion group IIA, IIB3 and IIC flammable gases and vapors. Elements for other gas groups are available upon request.
2 0 0, Series 7A00 Flow Curves IIA and 60 C (40 F) operating condition: ¾" 4" p = 30 kpa / 8.9 psi (absolute) 6" 8" p = 20 kpa / 7.4 psi (absolute) 0" 2" p = 0 kpa / 6.0 psi (absolute) Flow Rate; Nominal Meters Cubed per 20 C, (Nm^3/h) Pressure Drop Across Unit; (kilopascals, kpa) 2 7A00-TB
3 0 0, Series 7A00 Flow Curves IIB3 and 60 C (40 F) operating condition: ¾" ¼" p= 0 kpa / 6.0 psi (absolute) ½" 8" p = 20 kpa / 7.4 psi (absolute) 0" 2" p = 0 kpa / 6.0 psi (absolute) Flow Rate; Nominal Meters Cubed per 20 C, (Nm^3/h) Pressure Drop Across Unit; (kilopascals, kpa) 7A00-TB 3
4 0 0, Series 7A00 Flow Curves IIC and 60 C (40 F) operating condition: ¾" 4" p = 20 kpa / 7.4 psi (absolute) 5" 8" p = 0 kpa / 6.0 psi (absolute) 0, Flow Rate; Nominal Meters Cubed per 20 C, (Nm^3/h) Pressure Drop Across Unit; (kilopascals, kpa) 4 7A00-TB
5 DIMENSIONS C B A Metric Units - mm SIZE A Rp, BSP, Ø B C IIA IIB3 IIC NPTF 3/4" " /4" /2" " DIN, JIS, ASME (*) IIA IIB3 IIC Ø B C DN DN DN65 (**) DN DN DN25 (**) DN DN DN DN (*) DIN (PN0) Flange, JIS 0K Flange, ASME 50RF Flange (**) NOT available with ASME 50RF Flange English Units - in SIZE A Rp, BSP, Ø B C IIA IIB3 IIC NPTF 3/4" " /4" /2" " DIN, JIS, ASME (*) IIA IIB3 IIC Ø B C " " /2" (**) " " " (**) " " " " (*) DIN (PN0) Flange, JIS 0K Flange, ASME 50RF Flange (**) NOT available with ASME 50RF Flange The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such product at any time without notice. Cashco, Inc. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Cashco, Inc. product remains solely with the purchaser. 7A00-TB 5
6 7A00 Series PRODUCT R 0/25/7 3 & 4 7 A 5 7 & & 2 B 3 4 & ITION 3 & 4 SIZE / EXPLOSION GROUP Size IIA IIB3 IIC metric (in) DN20 (3/4") 3Y ES MZ DN25 (") 3Z ET N0 DN32 (-/4") 46 F0 N7 DN40 (-/2") 4E F8 NF DN50 (2") 4F F9 NG DN65 (2-/2") 4P FH NR DN80 (3") 4Y FS NZ DN00 (4") 56 G0 P7 DN25 (5") 5D G7 PE DN50 (6") 5E G8 PF DN200 (8") 5N GG PP DN250 (0") 5X GR - DN300 (2") 64 GY - Explosion Group IIA IIB3 ITION 5 OPERATING CONDITION Size p max. absolute in kpa (psi) T max in 0 C ( 0 F) DN (9) 60 (40) 3 DN50 50 (2) 60 (40) 5 DN (7) 60 (40) 2 DN (6) 60 (40) DN (6) 60 (40) DN (7) 60 (40) 2 DN (6) 60 (40) DN (7) 60 (40) 2 IIC DN (6) 60 (40) Consult factory for additional operating conditions. ITION 7 & 8 CASING / ELEMENT / RIM MATERIALS Material Stainless Steel (.457) 0C Sizes up to DN50 (2") Stainless Steel (.457) 0D Sizes DN (2-/2" - 2") ITION 9 GASKET MATERIALS Material NBR FKM 2 EPDM 3 FKM/FEP seamless covered 4 ITION 0 & HOUSING MATERIALS / CONNECTION (Threaded) Sizes Rp BSPP NPT DN20-50 (3/4" - 2") CS (zinc plated) 23 CS (.069 zinc plated) 4 42 Stainless Steel (.458) 9 92 (Flanged) Sizes DN (" - 2") CS Sizes DN250 & 300 (0" & 2") CS (zinc plated) Sizes DN25 (") CS (.069) Sizes DN (-/4" - 8")* Stainless Steel (.457) Sizes DN250 & 300 (0" & 2") Stainless Steel (.458) * Sizes DN (" - 8" sizes) (*) Not Available in Sizes 2-/2" and 5". DIN (PN0) ASME(50#RF) * JIS (0K) 7 9 C C C C C ITION 2 PORTS Number / Location Without ports For NPT - Sizes DN20-50 ( 3/4" - 2") For ASME Flange - Sizes DN25 (") One port G/2" on each side 2 Std. for all explosion groups and sizes Two ports G/2" on each side 4 ITION 3 MOUNTING KIT MAT'L FOR HOUSING Material Standard 8.8 Zinc Plated Standard A2 Stainless Steel 2 A4 Stainless Steel 3 ITION 4 & 5 TEMPERATURE SENSOR (PT00) Ex ib 3-wire Ex ib 3-wire Quantity plus transmitter None One 0 02 Cashco, Inc. P.O. Box 6 Ellsworth, KS PH (785) Fax. # (785) sales@cashco.com Printed in U.S.A. 7A00-TB Cashco GmbH Handwerkerstrasse Hoppegarten, Germany PH Fax. No germany@cashco.com Cashco do Brasil, Ltda. Al.Venus, 340 Indaiatuba - Sao Paulo, Brazil PH Fax. No. brazil@cashco.com ITION 6 NAME PLATE Material / Language Alum / German 7 Alum / English 8 ITION 8 PAINT Color No Paint (CS-Zinc or SST) 0 Blue Epoxy
Model 6A00 TECHNICAL BULLETIN 6A00 - TB Inline Deflagration Flame Arrestor
TECHNICAL BULLETIN 6A00 - TB 0-7 ISO Registered Company Model 6A00 Inline Deflagration Flame Arrestor OBJECTIVE The Model 6A00 inline deflagration flame arrestor is a device that can be fitted to the opening
More informationModel TB TECHNICAL BULLETIN. Pressure / Vacuum Vent with Pipe-Away
TECHNICAL BULLETIN 3200 - TB 04-16 Pallet Diaphragm Material: FEP TFE - Standard. Also available in FKM, EPDM and Buna-N. ISO Registered Company Model 3200 Pressure / Vacuum Vent with Pipe-Away OBJECTIVE
More informationINSTALLATION, OPERATION AND MAINTENANCE MANUAL (IOM) Model 6A00. Inline Deflagration Flame Arrestor SECTION I
INSTALLATION, OPERATION AND MAINTENANCE MANUAL (IOM) IOM-6A00 IIA1/IIA 03-16 ISO Registered Company Model 6A00 Inline Deflagration Flame Arrestor SECTION I I. DESCRIPTION AND APPLICATION As autonomous
More informationMAINTENANCE & ASSEMBLY INSTRUCTIONS FUSIBLE LINK. Inline Thermal Check Valve
MAINTENANCE & ASSEMBLY INSTRUCTIONS 02-16 ISO Registered Company FUSIBLE LINK Inline Thermal Check Valve MODEL FL-200 REFERENCE DATA: FL-200 Series Assembly Drawing No. A88-60200-00. INSTALLATION: 1. Clean
More informationMODELS BA1/BL1 BIO-SANITARY
TECHNICAL BULLETIN 5-17 ISO Registered Company MODELS BA1/BL1 BIO-SANITARY BACK PRESSURE REGULATORS The Models BA1 and BL1 are stainless steel back pressure relief regu la tors designed to handle small
More informationSTANDARD / GENERAL SPECIFICATIONS
TECHNICAL BULLETIN 123-S-DIFF-TB 02-16 ISO Registered Company MODEL 123-1+6+S HIGH PRESSURE VERSION DIFFERENTIAL BACK PRESSURE RELIEF REGULATOR Model 123-1+6+S is a high pressure variation of the basic
More informationMODELS PA1/PL1 BIO-SANITARY
TECHNICAL BULLETIN 5-17 ISO Registered Company MODELS PA1/PL1 BIO-SANITARY PRESSURE REDUCING REGULATORS The Models PA1 and PL1 are stainless steel pressure reducing regu la tors designed to handle small
More informationMODEL 5381 PRESSURE REDUCING REGULATOR 5381-TB TECHNICAL BULLETIN FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 5381-TB 03-16 ISO Registered Company MODEL 5381 REDUCING REGULATOR The Model 5381 is a stainless steel pressure reducing regu la tor designed to handle small to mid-capacity flow rates
More informationMODEL 345 HIGH PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN 345-TB FEATURES High inlet and outlet pressures; high pressure drops.
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 345 HIGH PRESSURE REDUCING REGULATOR The Model 345 is a piston style, heavy duty, high pres sure reducing regulator that can include bal anced trim
More informationMODEL C-CS CLEAN STEAM PRESSURE REDUCING REGULATOR C-CS-TB TECHNICAL BULLETIN FEATURES APPLICATIONS. ISO Registered Company MODEL C-CS
TECHNICAL BULLETIN 05-17 ISO Registered Company MODEL C-CS CLEAN STEAM PRESSURE REDUCING REGULATOR The Model C-CS* is a 316L SST self-contained pressure re ducing regulator designed primarily for steam
More informationMODELS CA-1 & CA-2 MODEL CA-1 CA-TB TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS CAUTION
ISO Registered Company MODELS CA-1 & CA-2 TECHNICAL BULLETIN CA-TB 02-16 MODEL CA-1 BACK PRESSURE / RELIEF REGULATOR The Model CA-1 is a compact, forged Bronze body or SST barstock body back pressure regulator
More informationMODEL 988-MB. Metallic Bellows Stem Seal for Model 988 Control Valve in Chemical Ser vice FEATURES APPLICATIONS ISO Registered Company
TECHNICAL BULLETIN 988-MB-TB 02-16 ISO Registered Company MODEL 988-MB Metallic Bellows Stem Seal for Model 988 Control Valve in Chemical Ser vice Bellows-Stem Sub-Assembly The Cashco Model 988-MB is a
More informationMODEL 1000HP-5 and MODEL 1000HP-36
TECHNICAL BULLETIN 1000HP-CRYO-TB 02-16 ISO Registered Company MODEL 1000HP-5 and MODEL 1000HP-36 CRYOGENIC PRESSURE REDUCING REGULATORS Model 1000HP-5 and 1000HP-36 are cryogenic re duc ing regulators
More informationPREMIER EZO TECHNICAL BULLETIN. Premier-TB BUTTERFLY ROTARY CONTROL VALVE FEATURES PREMIER EZO LINED BUTTERFLY CONTROL VALVE APPLICATIONS
ISO Registered Company TECHNICAL BULLETIN PREMIER EZO Premier-TB 02-16 BUTTERFLY ROTARY CONTROL VALVE The Premier EZO is an elastomer lined concentric butterfly control valve with a pneumatic spring-diaphragm
More informationFlame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 300. Product Description. (Vertical, in-line, deflagration)
ATEX approved Flame Arrester (Vertical, in-line, deflagration) Model Number 300 Product Description EGIL Storagetech Model Number 300 Flame Arrester is a safety device that has a flame barrier with a large
More informationMODEL 964. PNEUMATIC CONTROL VALVE 2" & 3" Size w/110 Actuator TECHNICAL BULLETIN 964-2"& 3" TB No Rev E, due to the C110 Actuator Series
TECHNICAL BULLETIN 964-2"& 3" TB 02-16 ISO Registered Company No Rev E, due to the C Actuator Series MODEL 964 PNEUMATIC CONTROL VALVE 2" & 3" Size w/ Actuator The Model 964 is a globe-style, pneumatic
More informationMODEL DA0 DO-ALL SERIES IVP PRESSURE REDUCING REGULATORS SMALL PISTON, PILOT-OPERATED DA0-TB TECHNICAL BULLETIN FEATURES APPLICATIONS
TECHNICAL BULLETIN DA0-TB 09-12 MODEL DA0 DO- SERIES IVP PRESSURE REDUCING REGULATORS SM PISTON, PILOT-OPERATED Model DA0 is a pilot-operated steam reducing regulator with a piston design. The internal
More informationMODEL 964. PNEUMATIC CONTROL VALVE 1/2" - 2" Size w/c27 or C53 Actuator TECHNICAL BULLETIN 964-TB FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 964 PNEUMATIC CONTROL VALVE 1/2" - 2" Size w/ or Actuator The Model 964 is a globe-style, pneumatic control valve for general plant utility services.
More informationMODEL 2296 / 2296HF TECHNICAL BULLETIN 2296-TB 07-16
TECHNICAL BULLETIN 2296-TB 07-16 ISO Registered Company MODEL 2296 / 2296HF ("HF" Formerly 1-1/ & Model 2266) SST and Bronze Pneumatic or Electric Actuated Control Valve The Model 2296 / 2296HF is an inexpensive
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationIn-Line Detonation Flame Arrester PROTEGO DA-SB. for stable detonations and deflagrations in a straight through design with shock tube, bidirectional
for stable detonations and deflagrations in a straight through design with shock tube, bidirectional ROTEGO DA-SB Ø a DN Design with one or two temperature sensors DN NG c dismantling dimension for servicing
More informationMODEL DL PRESSURE REDUCING REGULATOR BODY SIZES 1-1/2" & 2"(DN40 & 50) TECHNICAL BUL LE TIN DL-TB FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BUL LE TIN DL-TB 04-16 ISO Registered Company MODEL DL PRESSURE REDUCING REGULATOR BODY SIZES 1-1/2" & 2"(DN40 & 50) Model DL is a redesignation of the former Model D prod uct, limited to 1-1/2"
More informationIn-Line Detonation Flame Arrester PROTEGO DA-CG
for unstable and stable detonations and deflagrations in a straight through design with shock absorber, bidirectional NG DN Design with one or two temperature sensors Connection to the protected side (only
More informationMODEL 123 BACK PRESSURE / RELIEF REG U LA TOR CAUTION TECHNICAL BULLETIN 123-TB FEATURES MODEL 123 APPLICATIONS
TECHNICAL BULLETIN 123-TB 02-16 ISO Registered Company MODEL 123 BACK PRESSURE / RELIEF REG U LA TOR The Model 123 is a relief regulator suitable as a back pressure regulator or bypass valve for controlling
More informationFlame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 320. Product Description. (Vertical, in-line, detonation )
ATEX approved Flame Arrester (Vertical, in-line, detonation ) Model Number Product Description EGIL Storagetech Model In-line Detonation Flame Arrester is designed for installation in gas pipelines. Detonation
More informationLevel Measurement Point level measurement - RF Capacitance switches
Overview Configuration Installation is an inverse frequency shift capacitance level and material detection switch ideal for detecting interfaces, solids, liquids, toxic, and aggressive chemicals in critical
More informationMODEL 31 B LOW BACK PRESSURE/RELIEF SERVICE REGULATOR TECHNICAL BULLETIN FEATURES CAUTION
TECHNICAL BULLETIN 31-B-TB 02-16 ISO Registered Company MODEL 31 B LOW BACK PRESSURE/RELIEF SERVICE REGULATOR The Model 31-B is a compact relief regulator designed expressly for use as a back pressure
More informationMODEL 31 N LOW PRESSURE REDUCING SERVICE REGULATOR TECHNICAL BULLETIN FEATURES CAUTION
TECHNICAL BULLETIN 31-N-TB 02-16 ISO Registered Company MODEL 31 N LOW PRESSURE REDUCING SERVICE REGULATOR The Model 31-N is a compact service regulator designed expressly for use in the process in dus
More informationMODEL 1000HP-1+6 and MODEL 1000HP-1+8
TECHNICAL BULLETIN 1000HP-DIFF-TB 02-16 ISO Registered Company MODEL 1000HP-1+6 and MODEL 1000HP-1+8 DIFFERENTIAL PRESSURE REDUCING REGULATORS Models 1000HP-1+6 or 1000HP-1+8 are differential re duc ing
More informationIn-Line Detonation Flame Arrester PROTEGO DA-SB. for stable detonations and deflagrations in a straight through design with shock tube, bidirectional
for stable detonations and deflagrations in a straight through design with shock tube, bidirectional Ø a 1 Design with one temperature sensor 2 3 Connection to the protected side (only for type DA-SB-T-...)
More informationPASSIVE OPERATION Completely self-contained with no reliance on power supplies, sensors, actuators or any external components.
GAS CONTROL VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER The 9 Series In-Line Detonation Flame Arreresters are designed for installation in piping systems to provide explosion protection. Introduction
More informationMODEL 4381 PRESSURE REDUCING REGULATOR 1/4, 3/8, or 1/2 (DN8, DN10, or DN15) Sizes
TECHNICAL BULLETIN 4381-TB 03-16 ISO Registered Company MODEL 4381 PRESSURE REDUCING REGULATOR 1/4, 3/8, or 1/2 (DN8, DN10, or DN15) Sizes The Model 4381 is a stainless steel pressure reducing regu la
More informationLevel Measurement Point level measurement - RF Capacitance switches
Pointek CLS200 - Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level and material detection switch with optional rod/cable
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 4/18 Siemens FI Overview.
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. icenta Controls Ltd
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationOperating Instructions Inline Detonation Flame Arrester and
Operating Instructions Inline Detonation Flame Arrester 1002-0008 and 1002-0009 0102 PTB 04 ATEX 4003 X IIG IIB3 Issue : 27.11.2007 Page 1 of 7 1. Preface These operating instructions apply to inline detonation
More informationLevel Measurement Continuous level measurement - Capacitance transmitters
Overview Probe Applications Rod version Rod version with stilling well Cable version PFA coated cable version Extended cable with rod version Conductive liquids, slurries or solids Conductive liquids or
More informationMODEL 2171 CAUTION TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 2172mo 02-16 ISO Registered Company MODEL 2171 BACK PRESSURE / RELIEF REGULATOR The Model 2171 is a stainless steel back pres sure/re lief reg u la tor designed to handle small to mid-ca
More informationEN-DFA Series Detonation Flame Arrestor (ATEX Approved)
Instruction Manual D103585X012 September 2017 EN-DFA Series EN-DFA Series Detonation Flame Arrestor (ATEX Approved) Table of Contents Introduction...1 Product Description...1 Specifications...2 Principle
More informationMODEL PRESSURE REDUCING REGULATOR BODY SIZES 1/4" OR 3/8" (DN8 or DN10) TECHNICAL BULLETIN 3381-TB FEATURES APPLICATIONS
TECHNICAL BULLETIN 3381-TB 05-12 MODEL 3381 PRESSURE REDUCING REGULATOR BODY SIZES 1/4" OR 3/8" (DN8 or DN10) The Model 3381 is an inexpensive, bronze pressure reducing regulator designed to handle small
More information94407 Horizontal Inline Deflagration Flame Arrester
94407 The Shand & Jurs 94407 Horizontal Inline Deflagration Flame Arrester is designed to provide a positive flame stop in horizontal gas piping systems containing flammable vapors having a low flash point.
More information94406 Vertical Inline Deflagration Flame Arrester. Features
94406 The Shand & Jurs 94406 Vertical Inline Deflagration Flame Arresters are designed to provide a positive flame stop on low pressure tanks or piping systems containing flammable liquids or solvents
More informationLevel Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC500. 5/282 Siemens FI Overview.
SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse frequency shift capacitance level
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL (IOM) MODEL B7 BACK PRESSURE REGULATOR. SECTION l
INSTALLATION, OPERATION & MAINTENANCE MANUAL (IOM) IOM-B7 03/16 ISO Registered Company MODEL B7 BACK PRESSURE REGULATOR I. DESCRIPTION AND SCOPE The Model B7 is a back pressure regulator used to control
More informationPoint level measurement Capacitance switches
Pointek CLS300 Standard Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
More informationFlame arresters 4301A/4319A ATEX Approved
Flame arresters 4301A/4319A ATEX Approved The Whessoe Vapour Control range of flame arresters are designed and certified for use in conjunction with Whessoe pressure and vacuum valves, as well as for use
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationSERIES 670E End-of-Line Deflagration Flame Arrester
SERIES 670E PROTECTOSEAL CAUTION: If any questions arise concerning the proper installation or maintenance of our products, please contact Protectoseal or one of our Authorized Representatives. When installing
More informationMODELS C27 - C53 SPRING/DIAPHRAGM LINEAR PNEUMATIC ACTUATORS SECTION I I. DESCRIPTION AND SCOPE SECTION II II. REFERENCES IOM-C27-C
INSTALLATION, OPERATION & MAINTENANCE MANUAL (IOM) IOM-C27-C53 02-16 ISO Registered Company MODELS C27 - C53 SPRING/DIAPHRAGM LINEAR PNEUMATIC ACTUATORS SECTION I I. DESCRIPTION AND SCOPE Actuator models
More informationOperating Instruction Inline Detonation Flame Arrester
Operating Instruction Inline Detonation Flame Arrester 1002-0008 IBExU 11 ATEX 2071 X 0102 G IIB3 Issue : 05.04.2012 Page 1 of 7 1. Preface These operating instructions apply to inline detonation flame
More informationContinuous level measurement Capacitance transmitters
Siemens AG 2011 Level Measurement SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationHigh Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
More informationMagnetic-inductive flow meter for hazardous areas
Magnetic-inductive flow meter for hazardous areas Technical Datasheet EPX / UMF3 high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS300 Standard. 5/42 Siemens FI Overview.
Level Measurement Pointek CLS300 Standard Siemens AG 20 Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable
More informationModel 5000 Level Controller
Features Multiple Configurations The 5000 level controller is easily configured for either reverse or direct actions for both pneumatic and electric pilot options. The pneumatic pilot is available in snap
More informationPROTEGO Detonation Flame Arresters. Volume 4. for safety and environment
PROTEGO Detonation Flame Arresters Volume 4 for safety and environment 2 PROTEGO - at a glance More than 50 years ago, PROTEGO started developing special devices for protecting systems against explosions
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationPROTEGO Detonation Flame Arresters. Volume 4. Volume 4. for safety and environment
PROTEGO Detonation Flame Arresters Volume 4 Volume 4 Detonation Flame Arrester Function and description The function of fl ame arresters in the various combustion processes and applications is discussed
More informationFlame Arrestor Design and Application Data
Flame Arrestor Design and Application Data Please print it, fill it out and fax it to 1-352-493-2111 or scan & email to info@paradoxintellectual.com Items marked with an asterisk (*) are required fields.
More informationOscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids
Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Suitable for all kind of liquids Viscosity up to 120000 mpa s Excellent performance with changing process conditions
More informationGlass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
More information* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
More informationMODEL 987 TECHNICAL BULLETIN 987-TB Globe-Pattern Control Valve for General and Chemical Serv ice FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 987-TB 02-16 ISO Registered Company MODEL 987 Globe-Pattern Control Valve for General and Chemical Serv ice The Model 987 is a compact, economical, sliding stem, globe-style control
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationBaumann NV Electric Actuator with Control Valves
Product ulletin D103326X012 NV Electric Actuator aumann NV Electric Actuator with 24000 Control Valves The aumann NV electric control valve series (figures 1 and 2) is specifically designed for aumann
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationAccord DS/DM Series UltraSwitch Switch box
Accord DS/DM Series UltraSwitch Switch box Features DS/DM Series Ultraswitch Description The DS/DM Series UltraSwich from Flowserve Accord provides cost efficient, accurate and reliable position signaling
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationType D2 FloPro Control Valve
Product Bulletin Type D2 FloPro Control Valve D2 FloPro Valve The Type D2 FloPro control valve (figure 1) is a compact, rugged valve designed for on-off control. This valve is ideal for use as a dump valve
More informationAutomax DS/DM Series UltraSwitch Switch box
Automax DS/DM Series UltraSwitch Switch box Features DS/DM Series Ultraswitch Description The DS/DM Series UltraSwich from Flowserve Automax provides cost efficient, accurate and reliable position signaling
More informationBGN. All Metal Variable Area Flow Meter. Technical Data Sheet
All Metal Variable Area Flow Meter BGN Technical Data Sheet Extremely robust through star guiding system instead of guiding rod Flow metering of liquids, gases and steam Available up to nominal size of
More informationMODELS CA-1 & CA-2 MODEL CA-1 CA-TB TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS CAUTION
MODELS CA-1 & CA-2 TECHNICAL BULLETIN CA-TB 03-11 MODEL CA-1 BACK PRESSURE / RELIEF REGULATOR The Model CA-1 is a compact, forged bronze body back pressure regulator used to control inlet pressure level
More informationBaumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
More informationZirconia Oxygen Probe
Data Sheet SS/ZFG Issue Zirconia Oxygen Probe ZFG Series Environmental Certification MCERTS SIRA Certificate MC99000 Combustion monitoring control true wet measurement of net excess oxygen in situ measurement
More informationLevel Probe multicap DC 16
Technical Information TI 096F/00/en Operating Instructions 017186-1000 Level Probe multicap DC 16 Partially insulated rod probes Applications The Multicap DC 16 probe is primarily designed for limit detection
More informationPlastic tube variable area flowmeter for liquids and gases
Plastic tube variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding connections)
More informationT205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
More informationControl Valve GS 3 series 1/2 up to 10. material
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationFlame arresters/vents
Flame arresters/vents Product information serving the gas industry worldwide Introduction RMG-GASELAN Regel- und Messtechnik GmbH is a company based in Germany. We produce devices and safety systems recommended
More informationPREMIER EZO ELASTOMER LINED
INSTALLATION, OPERATION & MAINTENANCE MANUAL (IOM) ISO Registered Company PREMIER EZO AND PREMIER BODY AS SEM BLIES 12-16 INDEX SECTION DESCRIPTION AND SCOPE... I INSTALLATION... II General...II-A Flow
More informationFeatures. Product Bulletin 51.6:8590 August Valve D104017X012
8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and
More informationSKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationFisher CL600 Control-Disk Valve
CL600 Control-Disk Valve Product Bulletin Fisher CL600 Control-Disk Valve The Fisher CL600 Control-Disk valve provides outstanding performance in a wide range of pressure and temperature conditions. The
More informationMicro Motion F-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00603, Rev. F December 2007 Micro Motion F-Series Coriolis Flow and Density Meters Micro Motion F-Series Coriolis meters offer highly accurate mass flow, volume flow, and density
More informationDesign V250 Rotary Control Valve
Product Bulletin Design V250 Rotary Control Valve V250 Valve The Design V250 Hi-Ball rotary control valve (figure 1) is designed for heavy-duty throttling and on-off applications. Depending on size, this
More informationMV Series. We put you first. And keep you ahead. SMITH METER TURBINE METERS FEATURES OPERATING SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 1.
SPECIFICATIONS MEASUREMENT SOLUTIONS MV Series Bulletin SS02016 Issue/Rev. 1.7 (9/14) We put you first. And keep you ahead. SMITH METER TURBINE METERS The Smith Meter MV Series Turbine Meter is intended
More informationUNIK 5800/5900. Flameproof/Explosion-Proof Pressure Sensing Platform. GE Measurement & Control. High Quality. Features. Bespoke as Standard.
GE Measurement & Control UNIK 5800/5900 Flameproof/Explosion-Proof Pressure Sensing Platform The 5800 and 5900 are compact and rugged versions of the high performance UNIK 5000 pressure sensing platform
More informationDETONATION FLAME ARRESTER MODEL 7658A
DETONATION FLAME ARRESTER MODEL 7658A Actual Video Frame USCG Approved Successfully Tested to Procedures Approved by USCG, IMO & CSA Multiple Flow Selections per Pipe Size In-line Maintenance Available
More informationFAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications
f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers
More informationFisher CV500 Rotary Control Valve
Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More information8 Series High Pressure Deflagration Flame Arrestor
Instruction Manual 8 Series March 2015 8 Series High Pressure Deflagration Flame Arrestor Table of Contents Introduction...1 Specifications...2 Principle of Operation...3 Factors Affecting Flame Arrestor
More informationMODEL D PRESSURE REDUCING REGU LA TOR TECHNICAL BUL LE TIN D-TB FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BUL LE TIN D-TB 08-16 ISO Registered Company MODEL D PRESSURE REDUCING REGU LA TOR The Model D is Cashco s primary general serv ice, selfcontained, pressure reducing regulator. Unit handles inlet
More information