PREMIER EZO TECHNICAL BULLETIN. Premier-TB BUTTERFLY ROTARY CONTROL VALVE FEATURES PREMIER EZO LINED BUTTERFLY CONTROL VALVE APPLICATIONS
|
|
- Solomon Cook
- 6 years ago
- Views:
Transcription
1 ISO Registered Company TECHNICAL BULLETIN PREMIER EZO Premier-TB BUTTERFLY ROTARY CONTROL VALVE The Premier EZO is an elastomer lined concentric butterfly control valve with a pneumatic spring-diaphragm actuator. The unique design feature of the Premier EZO is the geometrically formed elastomer liner that reduces seating and unseating torque levels, allowing E Z-er Opening, reducing annoying pop-off at opening. An alternate design Premier Unlined is a seatless design that allows the disc 360 degree rotation, that has no elastomer liner and can be applied in higher temperature services where shutoff is not critical. Both designs are for low-to-moderate pressure drop throttling applications. Installation is between piping flanges as a flangeless wafer. (NOTE: Premier EZO must be installed between RF weldneck flanges.) FEATURES PREMIER EZO LINED BUTTERFLY CONTROL VALVE Five sizes; 3-10 (DN80-250) Flangeless wafer body Three body materials Two elastomer liner materials Integral extended bonnet Heavy stem guides Low pressure actuator package designed for throttling APPLICATIONS Primarily applied in non-critical utility applications such as compressed air or gas, cooling water, chilled water, hot water, or some HC services for Premier EZO. Premier Unlined is primarily applied in steam and hot gas, including HC services.
2 STANDARD/GENERAL SPECIFICATIONS Body Design Type: Concentric butterfly-type; 90 rotation. Flangeless wafer-type for mounting between pipe flanges. Premier EZO - includes elastomer liner. Premier Unlined - no elastomer liner. Body Sizes: 3, 4, 6, 8 and 10. (DN80, 100,, 200 and 250.) Body Materials: Elastomer Liner Materials: CI - Cast Iron CS - Cast Steel SST - Cast 316 SST See Table 1 for material specifications. Premier EZO ONLY. Backup ring - hard synthetic rubber. Seat and flange face - Buna-N (Nitrile), EPDM (Ethylene propylene). Maximum Body Temperature: Minimum Body Temperature: Flow Direction: Function of body material and liner material. Premier EZO - Buna-N liner: CI, CS, SST: +180 F (83 C) Premier EZO - EPDM liner: CI, CS, SST: +250 F (122 C) Premier Unlined: CI F (232 C) CS & SST F (260 C) Function of liner material. Premier EZO - Buna-N liner: CI, CS, SST: +10 F (-12 C) Premier EZO - EPDM liner: CI, CS, SST: -20 F (-29 C) Premier Unlined: -20 F (-29 C) Bi-directional; 0-90 rotation. Body Pressure/ See Table 1. Dependent on body Temperature material - Rating: CI - ANSI 125 #. CS & SST - ANSI # / #. Body Face-to Face Per MSS- SP67. See Figures 4 and 5 Dimensions: for dimensions Maximum Body Pressure: CI - per ANSI B16.1. CS & SST - per ANSI B See Table 1. Inherent Characteristic: Seat Leakage Class: Rangeability: 100:1 Equal Percentage. Per ANSI/FCI P min 50 psid (3.45 Bard). Premier EZO - Class VI. Premier Unlined - Class I; i.e. 1% Max C v. Maximum Shutoff Pressure Drop: CI psig (13.8 Barg). CS psig (51.0 Barg). SST psig (49.6 Barg). Premier EZO - psid (10.3 Bard). Premier Unlined - Function of body size. Up to psid (20.7 Bard). See Table 2. Maximum Dynamic Function of degrees rotation, actuator Pressure Drop: size, shaft material, body size, and internal velocity. See Tables 3A & 3B for limitations expressed as a pressure drop. Minimum Body Pressure: Premier EZO - Partial vacuum down to 0.5 psia (0.035 BarA). Premier Unlined - Full vacuum 0.0 psia (0.0 BarA). Maximum C v Capacity: Clamping Companion Flanges: In Body Size (DN) (80) (100) () (200) (250) C v Capacity Premier EZO Premier Unlined NOTE: Metric Capacity Factor - K v K v = C v /1.16 Premier EZO - CS or SST weldneck flanges ONLY, RF or FF, pressure classes # or #; NO CI 125 # or 250 # pipe flanges. Premier Unlined - CS or SST flanges, RF or FF, pressure classes # or #; CI 125 # FF or 250 # RF flanges. 2 Premier-TB
3 Stem Diameter: Body Size Stem Diameter In. (DN) In. (mm) 3 & (80 & 100) (-250) (15.9) (25.4) Painting: Standard: non-corrosion resistant portions to be painted with corrosion resistant epoxy paint per Cashco Spec #S Alternate: See Opt-95. Flange Surface Finish: Premier EZO - Not applicable. NO pipe flange gaskets to be utilized. Premier Unlined - 250/125 micro-inch R a (equivalent to 250/125 AARH). Suitable for use with spiral-wound metallic-filled gaskets. BODY SUB-ASSEMBLY MATERIAL SPECIFICATIONS Figure 1: Premier Body Cross Sections Body: Body Plug: Disc: Stem & Disc Pins: CI - ASTM A126, Class B CS - ASTM A216, Gr. WCB SST - ASTM A351, Gr. CF8M Similar to body material. ASTM A351, Gr. CF8M (Cast 316 SST). Standard: ASTM A564, Cond H1075 SST with BL1 Trim. See Table 4. Elastomer Liner & O-rings: Packing Follower: Alternate: ASTM A479, Gr.316 SST. with BL2 Trim. See Table 4. Premier EZO ONLY; Buna-N (Nitrile), EPDM (Ethylene Propylene). Premier Unlined ONLY; 303 SST with TFE tape-bushing. Premier-TB 3
4 Packing: Premier Unlined ONLY; Braided TFE, split-ring. Bearings: Premier EZO; TFE-lined fiberglass. Packing Flange: Upper Sleeve: Premier EZO; 304 SST. Premier Unlined; Body Sizes 3 & 4 (DN80 & 100), 304 SST. Body Sizes 6-10 (DN - 250), Ductile Iron. Premier Unlined ONLY; 316 SST. Cap Screws, Studs & Nuts: Premier Unlined; Stem - TFE-lined 316 SST, Thrust - TFE SST. Yoke: Body Sizes 3 & 4 (DN80 & 100), Carbon Steel structural tube. Body Sizes 6-10 (DN - 250), Ductile Iron. ACTUATOR TECHNICAL SPECIFICATIONS Basic Design: 0-90 Rotary. Spring-diaphragm. Rolling diaphragm with multiple springs. Enclosed linkage. Field-reversible for direct or reverse action (see Fig. 3). Standard with manual handwheel operator. Size, Stroke & Volume: Basic Model No. 48D 48R Nominal Diaphragm Area Lever Arm Length Nominal Stroke * Clearance Volumes Volumetric in 2 (cm2) in (mm) in (mm) in3 (cm3) in3 (cm3) 48 (310) (34.9) 1.94 (49.3) 27 (440) 87 (1425) Action Direct; ATC-FO (Increase in air LOAD rotates valve stem CW, closing valve) Reverse; ATO- FC (Increase in air LOAD rotates stem CCW, opening valve) Model No. 48D D D D-02 48R R R R-02 Body Size 3 & 4 * (DN80 & 100) 6 * (DN) 8 (DN200) * Premier Unlined ONLY 10 (DN250) Premier EZO ONLY 10 (DN250) 3 & 4 * (DN80 & 100) 6 * (DN) 8 (DN200) * Premier Unlined ONLY 10 (DN250) Premier EZO ONLY 10 (DN250) Bench Setting Range psig (Barg) 5-13 ( ) 5-13 ( ) ( ) ( ) 5-15 ( ) 5-13 ( ) ( ) ( ) * Both Premier EZO & Premier Unlined ATC-FO = Air-to-Close, Fail Open ATO-FC = Air-to-Open, Fail Close NOTE: No actuator bench setting range selection required; i.e., one actuator for each body size. 148D 148R 148 (955) (47.6) 2.65 (67.3) 90 (1475) 372 (6095) Maximum Operating Supply Pressure: * To generate 90 rotation 48 D/R = 20 psig (1.38 Barg). 148 D/R = 36 psig (2.48 Barg). Ambient -20 T amb 180 F Temperature (-29 T amb 83 C) Range: Mounting Positions: Open Close Rotation CCW-to-Open ATO-FC (Reverse) PUSHDOWN-to-OPEN May be rotated in two - 90 orientations for each direct or reverse arrangement. See Figures 4 and 5. Load Vent Close Open Rotation CCW-to-Open ATC-FO (Direct) PUSHDOWN-to-CLOSE NOTE: To switch action requires locating actuator stem to opposite side of valve stem. Load Vent Figure 2: Plug vs. Lever Arm vs. Actuator Orientation 4 Premier-TB
5 Travel Stop Standard - Limits travel to 0-90 Screw: rotational travel. Air Connection: Stroking Time: 1/4 female NPT. Reference STKSP-TB for stroke times with various accessories. ACTUATOR SUB-ASSEMBLY MATERIAL SPECIFICATIONS Casings & Cast aluminum; ASTM B108, Diaphragm UNS A Plate: Springs: Diaphragm: Arm Housing: Top-Case Plug: Epoxy coated steel. Rolling-type; Buna-N with polyester fabric. Cast iron. Naval brass. Position Indicator Plate - SST with high visibility red Assembly with indicating zone displaying degree 73 P/P of valve opening. Positioner: Housing - 48D/R - aluminum; 148D/R, - cast iron. Lens - plastic. Coverplate - SST. External screws - SST. Outboard stem bearing - steel ball bearing. NOTE: With Models ABB and PS2 the position indicator is integral with positioner, and housing is cast iron. Flange Bolting: Turnbuckle Assembly: Travel Stop Screw & Jamnut: Lever Arms: Cam/Spacer: Nameplate: 18-8 SST. Plated steel and SST. Plated Steel. SST with SST bolt and nut. SST. SST. Option-3: Handwheel: Cast aluminum. Handwheel Stem: 316 SST. Handwheel Gland: Naval brass. Locking Lever: Plated malleable iron. Threadseal: 18-8 SST with Buna-N insert. Figure 3: Model 148R actuator with 73 P/P Positioner with Opt.-3 Manual Handwheel Operator OPTION SPECIFICATIONS Option-3: MANUAL HANDWHEEL OPERATOR. A handwheel and locking lever are supplied to allow manually over-riding the standard pneumatic actuator in an emergency. Option-95: EPOXY PAINT. Special epoxy painting of all non-corrosion resistant surfaces per Cashco Spec #S Utilized in harsh atmospheric conditions. Premier-TB 5
6 6 Premier-TB
7 MOUNTED ACCESSORY SPECIFICATIONS Positioners: General. Mounted to arm housing. feedback linkage is enclosed and not exposed directly to elements. P/P Pneumatic. Model 73. Ad just able zero only. Analog signal only. Includes gauge port, with gauge. Not Available on 8" HF. Air Tubing: Model PS2-1 is general purpose. Model PS2-2 is Intrinsically safe, ATEX Ex ia IIC T6/T4, FM CLS 1 DIV 1, CSA CLS 1 DIV 1, SIL 2 Model PS2-3 EX d IIC T6/T4, SIL 2 Instrument air tubing SST with SST fittings. General: PMV Positioners. Alu mi num housing with cor ro sion resistant powder coated epoxy. Pneumatic output load as required by actuator bench range. Field re vers ible action. Mounting dimensions per IEC Standard. P/P Pneumatic. Model P5 features SST cam with a simple cam locking device, tapped exhaust port for venting media, external zero ad just ment. Input signal 3-15 psig, Includes gauge ports, no gauges. Analog only. I/P Electro-Pneumatic. Model D20 Digital and Hart compatible. Features single button self-calibration. input signal 4-20mA. Optional gauge block with gauges for Models D20 D and D20 I. Model D20 D is general purpose. Model D20 I is Intrinsically safe, ATEX Ex ia IIC T4, FM CLS 1 DIV 1, FM Nonincendive CLS 1 DIV 2. Model D20 E is ATEX EEX d IIB+H 2, T6 FM Approved. Gauge block is built in, no gauges. Not available with limit switch option. I/P Electro-Pneumatic. Model D3 Digital, Hart, Profibus, and Fieldbus compatible. Input signal 4-20mA. Features large graphic display. Optional gauge block for Models D3 X and D3 I, no gauges. Model D3 X is general purpose. Model D3 I is Intrinsically safe, ATEX EEX ia IIC T4. Model D3 E is ATEX EEX d IIB+H 2, T6 CSA CLS 1 DIV 1 FM CLS 1 DIV 1 Gauge block is built in, no gauges. Not available with limit switch option. Airset: Solenoid Valve: Transducers Other Accessories: Limit Switches: Model 5200P instrument air supply reg u la tor. Use with positioners. Brack et mount ed to actuator casing. Sup plied with gauge. See technical bul le tin 5200P-TB. Standard Brass: Available in stan dard weather-proof model. Brass body, 1/4" fe male NPT con nec tions. Nip ple mounted to ac tu a tor cas ing. 120 VAC, 60 Hz pow er sup ply, CSA Approved Class , NEMA 2,3,3S,4,4X. 8" HF utilizes a direct mount NAMUR mount style. X-Proof or SST construction: Consult Factory. Standard installation vents actuator and drives valve to fail-safe position upon loss of electrical power. Consult factory for 230/1/50, or 120 VDC power supplies, or in trin si cal ly safe (IS) service. FM, CSA approved NEMA 4X Cl 1, Div 1 and Cl 1, Div P/PD pressure controller. Lockup valve. Position transmitter. Model D20 and D3 positioners, switches are available, unit is enclosed in the positioner housing. Limit switch options not available on Explosion proof rated positioners. Model PS2 is Hart, Fieldbus and Profibus compatible. Input signal 4-20mA. Features a Makrolon housing, (Aluminum for Explosion Proof.) Mounting dimensions per IEC Standard. Premier-TB 7
8 TABLE 1 MATERIAL PRESSURE/TEMPERATURE RATINGS (Per ASME B16.5) Body/Bonnet Materials General Cast Iron (CI) Cast Carbon Steel (CS) Cast Stainless Steel (SST) ASTM Specifications A126, Class B A216, Grade WCB A351, Gr. CF8M Flangeless Wafer Design End Conn. fits between - 125#, #, 250# or # Flanged # Flanged (PN20) # Flanged (PN50) # Flanged (PN20) # Flanged (PN50) Pressure (psig) English Units Temperature ( F) Pressure (Barg) Metric Units Temperature ( C) to to to to to to to to to to TABLE 2 MAXIMUM SHUTOFF PRESSURE DROP Premier Body Size Max Pressure Drop Design In. (DN) psid (Bard) EZO ALL Unlined 3-8 (80-200) 10 (250) 200 (13.8) 8 Premier-TB
9 Premier-TB 9 TABLE 3A PREMIER EZO MAXIMUM DYNAMIC PRESSURE DROP Actuator Body Size In/(DN) Trim Design No. Maximum Dynamic Pressure Drop - psid (Bard) Action Model No. Travel - % 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Direct ATC-FO 48D-01 3 (80) 148 (10.2) 98 (6.8) 64 (4.4) 40 (2.8) 24 (1.7) (100) 100 (6.9) 66 (4.6) 43 (3.0) 28 (1.9) 17 (1.2) 10 (0.7) 6.5 (0.4) 6.0 (0.4) 6.0 (0.4) 148D-01 6 () 132 (9.1) 86 (5.9) 56 (3.9) 35 (2.4) (0.9) D-03 8 (200) 98 (6.8) 64 (4.4) 41 (2.8) 25 (1.7) D (250) 118 (8.1) 81 (5.6) 52 (3.6) 33 (2.3) (0.9) 7.6 (0.5) Reverse ATO-FC 48R-01 3 (80) 120 (8.3) 75 (5.2) 45 (3.1) 28 (1.9) 26 (1.8) 26 (1.8) 4 (100) 140 (9.7) 140 (9.7) 123 (8.5) 81 (5.6) 52 (3.6) 32 (2.2) 19 (1.3) R-01 6 () 133 (9.2) 86 (5.9) 54 (3.7) 32 (2.2) (1.2) 18 (1.2) 148R-03 8 (200) 98 (6.8) 64 (4.4) 41 (2.8) 25 (1.7) R (250) 118 (8.1) 81 (5.6) 52 (3.6) 33 (2.3) (0.9) 7.6 (0.5)
10 10 Premier-TB TABLE 3B PREMIER UNLINED MAXIMUM DYNAMIC PRESSURE DROP Actuator Body Size In/(DN) Trim Design No. Maximum Dynamic Pressure Drop - psid (Bard) Action Model No. Travel - % 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Direct ATC-FO 48D-01 3 (80) 231 (15.9) 142 (9.8) 86 (5.9) 50 (3.4) 29 (2.0) 22 (1.5) 22 (1.5) 4 (100) 161 (11.1) 103 (7.1) 62 (4.3) 37 (2.6) 22 (1.5) (0.7) 9.5 (0.7) 148D-01 6 () 227 (15.7) 146 (10.1) 89 (6.1) 53 (3.7) 31 (2.1) 17 (1.2) D-03 8 (200) 242 (16.7) 160 (11.0) 101 (7.0) 60 (4.1) 35 (2.4) (250) 200 (13.8) 198 (13.7) 132 (9.1) 86 (5.9) 53 (3.7) 32 (2.2) 18 (1.2) (0.4) Reverse ATO-FC 48R-01 3 (80) 214 (14.8) 129 (8.9) 76 (5.2) 43 (3.0) 34 (2.3) 34 (2.3) 4 (100) 258 (17.8) 238 (16.4) 156 (10.8) 94 (6.5) 56 (3.9) 32 (2.2) 18 (1.2) R-01 6 () 212 (14.6) 128 (8.8) 76 (5.2) 44 (3.0) 25 (1.7) R-03 8 (200) 242 (16.7) 160 (11.0) 101 (7.0) 60 (4.1) 35 (2.4) (250) 200 (13.8) 198 (13.7) 132 (9.1) 86 (5.9) 53 (3.7) 32 (2.2) 18 (1.2) (0.4)
11 TABLE 4 TRIM DESIGNATION NOS. VS. TRIM MATERIALS Premier Design EZO (LINED) Trim Designation Nos. Part Description BL1 BL2 Stem-Shaft 17-4PH 316 SST Disc CF8M CF8M Disc-to-Shaft Pins 17-4PH 316 SST Shaft Bearings TFE+Fbgls TFE+Fbgls Premier Design (UNLINED) Trim Designation Nos. Part Description BL1 BL2 Stem-Shaft 17-4PH 316 SST Disc CF8M CF8M Disc-to-Shaft Pins 17-4PH 316 SST Thrust Bearing TFE TFE Shaft Bearings TFE+316 SST TFE+316 SST Upper Sleeve 316 SST 316 SST TABLE 5 FLOW COEFFICIENTS - C V Premier Design EZO (Lined) Unlined Body Size Travel - % In. (DN) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 3 (80) (100) () (200) (250) (80) (100) () (200) (250) Premier-TB 11
12 Figure 4 ACTUATOR MOUNTING POSITIONS W/ 73 POSITIONER Position A is standard for fail closed action. Position B is standard for fail open action. Positions C and D covers vertical piping. Body Size DIMENSIONS - ENGLISH UNITS - In. & Lbs.. Dimensions in inches ± 0.06 ( ** WITH ACCESSORIES) Weight - Lbs. A B C D E F G H L M N F ** H ** L ** N ** DIMENSIONS - METRIC UNITS - mm & kg.. (DN) Dimensions in millimeters ± 1.6 mm ( ** WITH ACCESSORIES) Weight - A B C D E F G H L M N F ** H ** L ** N ** kg. (80) (100) () (200) (250) ** ACCESSORIES: SOLENOID VALVE / LIMIT SWITCH / TRANSDUCER or 764P / 5200P 12 Premier-TB
13 Figure 5 ACTUATOR MOUNTING POSITIONS W/ D3,D20, P5 or PS2 Position A is standard for fail closed action. Position B is standard for fail open action. Positions C and D covers vertical piping. Body Size DIMENSIONS - ENGLISH UNITS - In. & Lbs. Dimensions in inches ± ( ** WITH ACCESSORIES) Weight Lbs. A B C D E F G H L N F ** H ** L ** N ** P ** R ** DIMENSIONS - METRIC UNITS - mm & kg. (DN) Dimensions in millimeters ± 1.6 mm. ( ** WITH ACCESSORIES) Weight A B C D E F G H L N F ** H ** L ** N ** P ** R ** kg. (80) (100) () (200) (250) ** ACCESSORIES: SOLENOID VALVE / LIMIT SWITCH / TRANSDUCER or 764P / 5200P Premier-TB 13
14 NOTES The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifi cations of such product at any time without notice. Cashco, Inc. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Cashco, Inc. product remains solely with the purchaser. 14 Premier-TB
15 PREMIER PRODUCT R 02/25/16 P POS 3 S POSITION 3 - SIZE Size CI CS SST 3" 1 A J 4" 2 B K 6" 3 C L 8" 4 D M 10" 5 E N 0 POS 6 0 POSITION 6 - TRIM MATERIALS 0 No Packing Standard TFE LINER BL1 BL2 BL1 BL2 BUNA-N 1 3 EPDM 2 4 NONE A B POSITION P * (Bracket Mounted) - AIRSET* (Bracket Mounted) - Solenoid Valves Solenoid Valve *** Exhaust on Deenergization 764P Action None 120VAC 60 Hz 24 VDC None 0 6 C None W/ Airset 1 7 D Reverse 2 8 E Reverse W/ Airset 3 9 F Direct 4 A G Direct W/ Airset 5 B H For Special Construction Contact Cashco for Special Code X * Refer to 764-TB for Product Code of Controller.. ***Solenoid rated as 4/4X only. An X in POS 12 followed by a 5-digit control num ber over rides remaining selections. POS POS POS POS POS POS POS B Positioner Model Actuator Model 48 for 3 & for 6 size 148 for 8 * & 10 Unlined 148 for 10 Lined Body Assy Only ** POSITION 11 - ACTUATOR MOUNTING POSITION Mtg. HORIZ Mtg. Actuator Action Pos. Pos. VERT ATO/FC (5-15 Bench) A A C C ATC/FO (5-13 Bench) B B D D ATO/FC A E C G 5-13 Bench ATC/FO B F D H ATO/FC A N C R ATC/FO Bench B P D S ATO/FC A T C V ATC/FO Bench B U D W For Cashco Act. w/ yoke For ISO 5211 Act. Mount w/yoke For Cashco Act. w/o yoke * 8 Lined and Unlined. 10 Unlined only. ** Use code "0" in Positions 12 thru 16 POSITION 13 - DIRECT ACTING POSITIONER with AIRSET (Bracket Mounted) (3-15 psig) 4-20 ma Specify Split Range in Special Instructions on the P.O. and Order Entry Screen Ratings Analog/Digital Hart Fieldbus Profi bus 73 P/P * Gen. Purpose 4 P5 P/P Gen. Purpose 1 D20 D I/P Gen. Purpose C D D20 I I/P Intrinsically Safe 2 5 D20 E I/P *** Explosion Proof E F D3 X I/P Gen. Purpose L M N P D3 I I/P Intrinsically Safe A D3 E I/P *** Explosion Proof G H J K PS2-1 I/P Gen. Purpose R S T PS2-2 I/P Intrinsically Safe 7 9 B PS2-3 I/P *** Explosion Proof U V W None 0 None ** # * Includes gauge port and gauge, select 6 from Position 14. **Includes Mounting Hardware to IEC (Namur) Mounting Dims. *** Not available with limit/proximity switch option. Select codes 9 or 8 in Pos. 15. J M L POSITION 14 - VALVE CHARACTERISTIC / GAUGE BLOCK Positioner Inherent Valve Characteristic No Positioner selected Without Gauge Block With Gauge Block ** With Gauge Ports * Equal % * Model 73 P/P includes gauge port and gauge. * For P5 gauge ports built in. No gauges. * For D20 E, D3 E & PS2-3 gauge ports built-in. No gauges ** For D20 D & D20 I and PS2-1 & PS2-2 - gauge block with gauges. ** For D3 X & D3 I gauge block only - no gauges. Options Inductive Limit Switches POSITIONER 15 - POSITIONER OPTIONS POSITIONERS I/P TRANSDUCERS Microswitches Limit Switches Position Transmitter 3-15 PSIG No Airset 3-15 PSIG W/ Airset 6-30 PSIG No Airset 6-30 PSIG W/ Airset By Pass Valve 73 A D N P5 4 5 D3 & D20 7 T 9 PS2 8 No Positioner C F J M None 0 POSITION 17 - PAINTING/CLEANING POSITION 16 - OPTIONS Accessories None No Handwheel 0 Handwheel 9 Painting Option Standard Cleaning Standard 0 Epoxy Painted Per Cashco Spec #S Cashco, Inc. P.O. Box 6 Ellsworth, KS PH (785) Fax. # (785) sales@cashco.com Printed in U.S.A. Premier-TB Cashco GmbH Handwerkerstrasse Hoppegarten, Germany PH Fax. No germany@cashco.com Cashco do Brasil, Ltda. Al.Venus, 340 Indaiatuba - Sao Paulo, Brazil PH Fax. No. brazil@cashco.com
MODEL 964. PNEUMATIC CONTROL VALVE 1/2" - 2" Size w/c27 or C53 Actuator TECHNICAL BULLETIN 964-TB FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 964 PNEUMATIC CONTROL VALVE 1/2" - 2" Size w/ or Actuator The Model 964 is a globe-style, pneumatic control valve for general plant utility services.
More informationMODEL 964. PNEUMATIC CONTROL VALVE 2" & 3" Size w/110 Actuator TECHNICAL BULLETIN 964-2"& 3" TB No Rev E, due to the C110 Actuator Series
TECHNICAL BULLETIN 964-2"& 3" TB 02-16 ISO Registered Company No Rev E, due to the C Actuator Series MODEL 964 PNEUMATIC CONTROL VALVE 2" & 3" Size w/ Actuator The Model 964 is a globe-style, pneumatic
More informationMODEL 2296 / 2296HF TECHNICAL BULLETIN 2296-TB 07-16
TECHNICAL BULLETIN 2296-TB 07-16 ISO Registered Company MODEL 2296 / 2296HF ("HF" Formerly 1-1/ & Model 2266) SST and Bronze Pneumatic or Electric Actuated Control Valve The Model 2296 / 2296HF is an inexpensive
More informationMODEL 988-MB. Metallic Bellows Stem Seal for Model 988 Control Valve in Chemical Ser vice FEATURES APPLICATIONS ISO Registered Company
TECHNICAL BULLETIN 988-MB-TB 02-16 ISO Registered Company MODEL 988-MB Metallic Bellows Stem Seal for Model 988 Control Valve in Chemical Ser vice Bellows-Stem Sub-Assembly The Cashco Model 988-MB is a
More informationTECHNICAL BULLETIN. Design Con cept: Two Body Configurations: Multiple Ports: Characteristic: Dual Stem Seal: Polished In te ri or: Exterior Finish:
TECHNICAL BULLETIN SCV-S-TB 03-17 ISO Registered Company MODEL SCV-S SANITARY GLOBE-STYLE CONTROL VALVES The Model SCV-S is a throttling, pneumatically ac tu at ed control valve. This design provides a
More informationMODEL 987 TECHNICAL BULLETIN 987-TB Globe-Pattern Control Valve for General and Chemical Serv ice FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 987-TB 02-16 ISO Registered Company MODEL 987 Globe-Pattern Control Valve for General and Chemical Serv ice The Model 987 is a compact, economical, sliding stem, globe-style control
More informationRANGER QCT ECCENTRIC PLUG ROTARY CONTROL VALVE (ROTARY GLOBE)
TECHNICAL BULLETIN Ranger-TB 05-06 RANGER QCT ECCENTRIC PLUG ROTARY CONTROL VALVE (ROTARY GLOBE) The Ranger QCT is a control valve with a pneumatic spring-diaphragm actuator. It can be supplied with either
More informationMODEL SCV-30 SCV-30-TB TECHNICAL BULLETIN SANITARY GLOBE-STYLE CONTROL VALVES FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN SCV-30-TB 03-17 ISO Registered Company MODEL SCV-30 SANITARY GLOBE-STYLE CONTROL VALVES The Model SCV-30 * is a revolutionary, throttling, pneumat i cal ly actuated control valve. This
More informationMODELS CA-1 & CA-2 MODEL CA-1 CA-TB TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS CAUTION
ISO Registered Company MODELS CA-1 & CA-2 TECHNICAL BULLETIN CA-TB 02-16 MODEL CA-1 BACK PRESSURE / RELIEF REGULATOR The Model CA-1 is a compact, forged Bronze body or SST barstock body back pressure regulator
More informationMODEL 345 HIGH PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN 345-TB FEATURES High inlet and outlet pressures; high pressure drops.
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 345 HIGH PRESSURE REDUCING REGULATOR The Model 345 is a piston style, heavy duty, high pres sure reducing regulator that can include bal anced trim
More informationMODEL C-CS CLEAN STEAM PRESSURE REDUCING REGULATOR C-CS-TB TECHNICAL BULLETIN FEATURES APPLICATIONS. ISO Registered Company MODEL C-CS
TECHNICAL BULLETIN 05-17 ISO Registered Company MODEL C-CS CLEAN STEAM PRESSURE REDUCING REGULATOR The Model C-CS* is a 316L SST self-contained pressure re ducing regulator designed primarily for steam
More informationModel TB TECHNICAL BULLETIN. Pressure / Vacuum Vent with Pipe-Away
TECHNICAL BULLETIN 3200 - TB 04-16 Pallet Diaphragm Material: FEP TFE - Standard. Also available in FKM, EPDM and Buna-N. ISO Registered Company Model 3200 Pressure / Vacuum Vent with Pipe-Away OBJECTIVE
More informationMODELS BA1/BL1 BIO-SANITARY
TECHNICAL BULLETIN 5-17 ISO Registered Company MODELS BA1/BL1 BIO-SANITARY BACK PRESSURE REGULATORS The Models BA1 and BL1 are stainless steel back pressure relief regu la tors designed to handle small
More informationSTANDARD / GENERAL SPECIFICATIONS
TECHNICAL BULLETIN 123-S-DIFF-TB 02-16 ISO Registered Company MODEL 123-1+6+S HIGH PRESSURE VERSION DIFFERENTIAL BACK PRESSURE RELIEF REGULATOR Model 123-1+6+S is a high pressure variation of the basic
More informationTECHNICAL BULLETIN SCV-30-TB
TECHNICAL BULLETIN SCV-30-TB 11-07 MODEL SCV-30 SANITARY GLOBE-STYLE CONTROL VALVES The Model SCV-30 * is a revolutionary, throttling, pneumatically actuated control valve. This unique design provides
More informationModel 7A00 7A00 - TB TECHNICAL BULLETIN. Detonation Flame Arrestor
TECHNICAL BULLETIN 7A00 - TB 0-7 ISO Registered Company Model 7A00 Detonation Flame Arrestor OBJECTIVE The Model 7A00 detonation flame arrestor is a device that can be fitted to the opening of an enclosure
More informationRANGER QCT TECHNICAL BULLETIN. Ranger-TB ECCENTRIC PLUG ROTARY CONTROL VALVE (ROTARY GLOBE) FEATURES APPLICATIONS ISO Registered Company
TECHNICAL BULLETIN Ranger-TB 02-16 ISO Registered Company RANGER QCT ECCENTRIC PLUG ROTARY CONTROL VALVE (ROTARY GLOBE) The Ranger QCT is a control valve with a pneumatic spring-diaphragm actuator. It
More informationMODEL TB TECHNICAL BULLETIN. Pneumatic Control Valve for General and Chemical Serv ice FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 989 Pneumatic Control Valve for General and Chemical Serv ice The Model 989 is a globe-style, pneumatic control valve designed primarily for general
More informationMODELS PA1/PL1 BIO-SANITARY
TECHNICAL BULLETIN 5-17 ISO Registered Company MODELS PA1/PL1 BIO-SANITARY PRESSURE REDUCING REGULATORS The Models PA1 and PL1 are stainless steel pressure reducing regu la tors designed to handle small
More informationModel 6A00 TECHNICAL BULLETIN 6A00 - TB Inline Deflagration Flame Arrestor
TECHNICAL BULLETIN 6A00 - TB 0-7 ISO Registered Company Model 6A00 Inline Deflagration Flame Arrestor OBJECTIVE The Model 6A00 inline deflagration flame arrestor is a device that can be fitted to the opening
More informationMODEL 5381 PRESSURE REDUCING REGULATOR 5381-TB TECHNICAL BULLETIN FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 5381-TB 03-16 ISO Registered Company MODEL 5381 REDUCING REGULATOR The Model 5381 is a stainless steel pressure reducing regu la tor designed to handle small to mid-capacity flow rates
More informationRANGER QCT TECHNICAL BULLETIN. Ranger-TB ECCENTRIC PLUG ROTARY CONTROL VALVE (ROTARY GLOBE) FEATURES APPLICATIONS
TECHNICAL BULLETIN 04-10 RANGER QCT ECCENTRIC PLUG ROTARY CONTROL VALVE (ROTARY GLOBE) The Ranger QCT is a control valve with a pneumatic spring-diaphragm actuator. It can be supplied with either a flanged
More informationMODELS C27 - C53 SPRING/DIAPHRAGM LINEAR PNEUMATIC ACTUATORS SECTION I I. DESCRIPTION AND SCOPE SECTION II II. REFERENCES IOM-C27-C
INSTALLATION, OPERATION & MAINTENANCE MANUAL (IOM) IOM-C27-C53 02-16 ISO Registered Company MODELS C27 - C53 SPRING/DIAPHRAGM LINEAR PNEUMATIC ACTUATORS SECTION I I. DESCRIPTION AND SCOPE Actuator models
More informationMODEL DA0 DO-ALL SERIES IVP PRESSURE REDUCING REGULATORS SMALL PISTON, PILOT-OPERATED DA0-TB TECHNICAL BULLETIN FEATURES APPLICATIONS
TECHNICAL BULLETIN DA0-TB 09-12 MODEL DA0 DO- SERIES IVP PRESSURE REDUCING REGULATORS SM PISTON, PILOT-OPERATED Model DA0 is a pilot-operated steam reducing regulator with a piston design. The internal
More informationBaumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
More informationMODEL TB TECHNICAL BULLETIN. Pneumatic Control Valve for General and Chemical Serv ice FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 988 Pneumatic Control Valve for General and Chemical Serv ice The Model 988 is a globe-style, pneumatic control valve designed primarily for general
More informationFisher eplug complete Rotary Control Valve and Actuator Package
Product Bulletin D103196X012 eplug complete Fisher eplug complete Rotary Control Valve and Actuator Package...your complete control valve solution... simple...easy to select and install reliable...engineered
More informationMODEL 2171 CAUTION TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BULLETIN 2172mo 02-16 ISO Registered Company MODEL 2171 BACK PRESSURE / RELIEF REGULATOR The Model 2171 is a stainless steel back pres sure/re lief reg u la tor designed to handle small to mid-ca
More informationMODEL 1000HP-5 and MODEL 1000HP-36
TECHNICAL BULLETIN 1000HP-CRYO-TB 02-16 ISO Registered Company MODEL 1000HP-5 and MODEL 1000HP-36 CRYOGENIC PRESSURE REDUCING REGULATORS Model 1000HP-5 and 1000HP-36 are cryogenic re duc ing regulators
More information700 Series Anti-corrosion Control Valves
7 Series Anticorrosion Control Valves Specification Data CH92 11/97 Split Body PTFE Lined Control Valves for Corrosive Applications Table of Contents Foreword.................................................................
More informationPREMIER EZO ELASTOMER LINED
INSTALLATION, OPERATION & MAINTENANCE MANUAL (IOM) ISO Registered Company PREMIER EZO AND PREMIER BODY AS SEM BLIES 12-16 INDEX SECTION DESCRIPTION AND SCOPE... I INSTALLATION... II General...II-A Flow
More informationINTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance
globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe
More informationDesign GX Control Valve and Actuator System
Product Bulletin Design GX Control Valve and Actuator System The Fisher Design GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids,
More informationCONTROL VALVES QUALITY, DEPENDABILITY, SERVICE. REPUTATION BUILT ON. Innovative Solutions
CONTROL VALVES REPUTATION BUILT ON QUALITY, DEPENDABILITY, SERVICE. www.cashco www.valtron.co.za com Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you
More informationMAINTENANCE & ASSEMBLY INSTRUCTIONS FUSIBLE LINK. Inline Thermal Check Valve
MAINTENANCE & ASSEMBLY INSTRUCTIONS 02-16 ISO Registered Company FUSIBLE LINK Inline Thermal Check Valve MODEL FL-200 REFERENCE DATA: FL-200 Series Assembly Drawing No. A88-60200-00. INSTALLATION: 1. Clean
More informationMODEL PRESSURE REDUCING REGULATOR BODY SIZES 1/4" OR 3/8" (DN8 or DN10) TECHNICAL BULLETIN 3381-TB FEATURES APPLICATIONS
TECHNICAL BULLETIN 3381-TB 05-12 MODEL 3381 PRESSURE REDUCING REGULATOR BODY SIZES 1/4" OR 3/8" (DN8 or DN10) The Model 3381 is an inexpensive, bronze pressure reducing regulator designed to handle small
More informationMODEL 31 N LOW PRESSURE REDUCING SERVICE REGULATOR TECHNICAL BULLETIN FEATURES CAUTION
TECHNICAL BULLETIN 31-N-TB 02-16 ISO Registered Company MODEL 31 N LOW PRESSURE REDUCING SERVICE REGULATOR The Model 31-N is a compact service regulator designed expressly for use in the process in dus
More informationFisher 9500 Butterfly Control Valve
9500 Product Bulletin Fisher 9500 Butterfly Control The Fisher 9500 butterfly valve is a fully lined valve for use with corrosive fluids and where tight shutoff is required. The nitrile or PTFE liner totally
More informationFisher 657 and 667 Diaphragm Actuators
657 and Actuators Product Bulletin Fisher 657 and Diaphragm Actuators Fisher 657 and spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner
More informationParamax Series Control Ball Valve. Specification Data CM6004 7/97
Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................
More informationMODEL DL PRESSURE REDUCING REGULATOR BODY SIZES 1-1/2" & 2"(DN40 & 50) TECHNICAL BUL LE TIN DL-TB FEATURES APPLICATIONS. ISO Registered Company
TECHNICAL BUL LE TIN DL-TB 04-16 ISO Registered Company MODEL DL PRESSURE REDUCING REGULATOR BODY SIZES 1-1/2" & 2"(DN40 & 50) Model DL is a redesignation of the former Model D prod uct, limited to 1-1/2"
More informationFisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationFisher GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
More informationMODEL 31 B LOW BACK PRESSURE/RELIEF SERVICE REGULATOR TECHNICAL BULLETIN FEATURES CAUTION
TECHNICAL BULLETIN 31-B-TB 02-16 ISO Registered Company MODEL 31 B LOW BACK PRESSURE/RELIEF SERVICE REGULATOR The Model 31-B is a compact relief regulator designed expressly for use as a back pressure
More information28000 Series Varipak Control Valves
GE Oil & Gas Technical Specifications 10/2012 Masoneilan * Valves 28000 Series Varipak Control Valves Precise Microflow Valves with Compact Design and Flexible Capabilities Table of Contents Numbering
More informationFisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationCML Electric Actuator for Baumann Series
Electronic Actuators Product Bulletin CML Electric Actuator for Baumann 4000 Series CML-50 and CML-750 electronic modulating valve actuators feature state-of-the-art brushless DC motor technology to provide
More informationBaumann NV Electric Actuator with Control Valves
Product ulletin D103326X012 NV Electric Actuator aumann NV Electric Actuator with 24000 Control Valves The aumann NV electric control valve series (figures 1 and 2) is specifically designed for aumann
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationFisher 3024C Diaphragm Actuator
3024C Actuator Product Bulletin Fisher 3024C Diaphragm Actuator The 3024C actuator is a compact spring opposed pneumatic diaphragm actuator incorporating a cast yoke mounting and is suitable for general
More informationMODELS CA-1 & CA-2 MODEL CA-1 CA-TB TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS CAUTION
MODELS CA-1 & CA-2 TECHNICAL BULLETIN CA-TB 03-11 MODEL CA-1 BACK PRESSURE / RELIEF REGULATOR The Model CA-1 is a compact, forged bronze body back pressure regulator used to control inlet pressure level
More informationMODEL 123 BACK PRESSURE / RELIEF REG U LA TOR CAUTION TECHNICAL BULLETIN 123-TB FEATURES MODEL 123 APPLICATIONS
TECHNICAL BULLETIN 123-TB 02-16 ISO Registered Company MODEL 123 BACK PRESSURE / RELIEF REG U LA TOR The Model 123 is a relief regulator suitable as a back pressure regulator or bypass valve for controlling
More informationFisher GX 3-Way Control Valve and Actuator System
GX 3-Way Valve and Actuator Product Bulletin Fisher GX 3-Way Control Valve and Actuator System The Fisher GX 3-Way is a compact, state-of-the-art control valve and actuator system, designed to accurately
More informationMark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage
Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationMODEL 4381 PRESSURE REDUCING REGULATOR 1/4, 3/8, or 1/2 (DN8, DN10, or DN15) Sizes
TECHNICAL BULLETIN 4381-TB 03-16 ISO Registered Company MODEL 4381 PRESSURE REDUCING REGULATOR 1/4, 3/8, or 1/2 (DN8, DN10, or DN15) Sizes The Model 4381 is a stainless steel pressure reducing regu la
More informationPOWER-SEAL Series P1S / P1F / P1M / P1H Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300
POWER-SEAL Series P1S / P1F / P1M / P1H Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300 NEW DESIGN - Reduced Torque - Featuring Actuators and Accessories TABLE OF CONTENTS
More informationSeries 2200 and 2220 Control Valves
Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Series 2200 Series 2220 Norriseal Series 2200 and 2220 control valves have been
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationMODEL 988 TECHNICAL BULLETIN Pneumatic Control Valve for General and Chemical Service FEATURES APPLICATIONS
TECHNICAL BULLETIN 988-TB 02-98 MODEL 988 Pneumatic Control Valve for General and Chemical Service The Model 988 is a globe-style, pneumatic control valve designed primarily for general and chemical service.
More informationFisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
More informationPython 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON
Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing
More informationVee-Ball Design V150, V200 and V300 Rotary Control Valves
Product Bulletin Vee-Ball Design V150, V200 and V300 Rotary Control Valves Vee-Ball Valves This bulletin covers the 1- through 2-inch, 3- through 12-inch Series B, and the 14- through 20-inch Design V150,
More informationMark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features
Mark 37/377 Series Final Control Element The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan s sliding gate
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationFisher YD and YS Control Valves
YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the
More informationMODEL 1000HP-1+6 and MODEL 1000HP-1+8
TECHNICAL BULLETIN 1000HP-DIFF-TB 02-16 ISO Registered Company MODEL 1000HP-1+6 and MODEL 1000HP-1+8 DIFFERENTIAL PRESSURE REDUCING REGULATORS Models 1000HP-1+6 or 1000HP-1+8 are differential re duc ing
More informationDesign CP Globe Valve for Chemical or General Service
November 1997 Bulletin 51.1:CP(010) Design CP Globe Valve for Chemical or General Service Compact, light-weight valve with integral flanges, self-aligning trim, and bidirectional flow capabilities 1/ to
More informationFisher GX Control Valve and Actuator System
GX Control Valve and Actuator Product Bulletin Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationFisherr GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisherr GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationFisher Control-Disk Valve NPS 14-24
Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationFisher A31D Double-Flange High-Performance Butterfly Valve
A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure
More informationwww.sullivanandsons.com Engineering Services Sullivan and Sons, Inc., offers a wide range of engineering services. Our expertise can help you through each stage, including conception, design, construction,
More informationFisher A31A Cryogenic High Performance Butterfly Valve
A31A Cryogenic Valve Product Bulletin Fisher A31A Cryogenic High Performance Butterfly Valve The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed for extreme temperature cryogenic
More informationSeries 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
More informationFisher A31D Double-Flange High-Performance Butterfly Valve
A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure
More informationType 1051 and 1052 Diaphragm Rotary Actuators
Product Bulletin 1051 and 1052 Actuators Type 1051 and 1052 Diaphragm Rotary Actuators The Type 1051 and 1052 spring-return diaphragm rotary actuators (figure 1) operate splined shaft rotary valves, such
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationFisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve
Product Bulletin D500230X012 A31A Cryogenic Valve Fisher POSI-SEAL A31A Cryogenic High Performance Butterfly Valve Description The Fisher A31A Cryogenic High Performance Butterfly Valve (HPBV) is designed
More informationFisher 3710 and 3720 Positioners and 3722 Electro-Pneumatic Converter
3710 and 3720 Positioners Product Bulletin Fisher 3710 and 3720 Positioners and 3722 Electro-Pneumatic Converter Fisher 3710 pneumatic and 3720 electro-pneumatic positioners are designed for use with either
More informationPOSITIONERS and Controls for Complete Valve Automation
CONTROLS A Division of AT Controls Pneumatic & Electro-Pneumatic POSITIONERS and Controls for Complete Valve Automation 1 SS SERIES SS Features Easy and quick auto-calibration Detecting RA (reverse acting)
More informationFisher RSS Lined Globe Valve
Instruction Manual D0990 November 009 RSS Valve Fisher RSS Lined Globe Valve Contents Introduction............................... Scope of Manual.......................... Description...............................
More informationType Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -
Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationJordan Control Valve Series
Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More information708MV Series Motor Valve
708MV Series Motor Valve FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708MV offers several advantages including extreme accuracy, high turndown ratios and repeatability. The features
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More information