Mark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features
|
|
- Kristian Cox
- 5 years ago
- Views:
Transcription
1 Mark 37/377 Series Final Control Element The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan s sliding gate valve seat design. The result is a superior degree of accuracy that makes the Mark 37 ideal for use as the final control element in distributed process control systems. Precision control begins with a high resolution, low hysteresis digitally controlled motor. Additional features include a switch selectable power supply, a hand drive mechanism for manual operation, and a 4- ma current input signal. Upon loss of signal (not loss of power), the motor is designed to lock in place or fail to the minimum input signal position. Accuracy is further enhanced through the use of Jordan s unique sliding gate valve seat. Consisting of a modulating disc and stationary plate, the seat components are slotted with multiple orifices that align to provide the precise flow needed to meet the control system requirements. With multiple openings distributed over the mass of the seating surfaces, the valve fully strokes in a fraction of the travel required by conventional valves, for rapid correction of any deviation from the process setpoint. Features Sliding Gate Seats all of Jordan Valve s differential regulators feature advanced sliding gate seat technology. Straight-through flow reduces turbulence for long life, quiet operation and excellent rangeability Short stroke for fast response and accurate regulation. Interchangeable seats for easy maintenance and changes Tight Shutoff (ANSI Class IV) due to overlap of seat closure area A stroke shorter than those found in globe or plug-style valves results in an operation much faster than other electric control valves. Long packing and stem life, with stem packing four times deeper than stem travel. Fewer spare parts, no gaskets or o-rings (on sizes and below), and self cleaning seats mean long valve life and easy maintenance. Alternative Models For customers who require the specifications and performance of the Mark 37, but require equal percentage seats, Jordan Valve offers the MK377. Jordan Valve, a division of Richards Industries 317 Wasson Road Cincinnati, OH (f) jordan@richardsind.com Control Valves Mark 37/377 Final Control Element
2 Specifications s: 1/4" through 6" (DN8 through DN15) Note: 1/4" & 3/8" sizes uses 1/" body with reducers End Connections: Threaded (NPT, BSPT, BSPP through " sizes) ANSI Flanges (15#, 3#) DIN Flanges (PN1/16, PN5/4) Body Materials: Bronze (1/" - "/DN15-DN5) Ductile Iron Carbon Steel (WCB) Stainless Steel (CF8M) Trim Materials: 33SS for DI, BZ or CS valves 316SS for SS body valves Seat Materials: 33 SST/Jorcote 316 SST/Jorcote Yoke Material: Cast Iron Stem Packing: Spring-loaded Teflon (5 F max/6 C) Braided (above 5 F/6 C) Service: steam, water, air, oil, gas and chemicals Shutoff: ANSI Class IV Flow Characteristic: Linear Equal percentage (specify model MK377) Action: Direct (control signal closes valve) Reverse (control signal opens valve) Actuators: CML 1 Maximum Thrust 1 lb. (,4 Kn) CML 5 Maximum Thrust 5 lb (1,1 Kn) SM11 - for valves -1/" - 6" in size (Kv) Values and Maximum Allowable P Ratings (DN) (Kv) Seat Maximum P psi (bar) Material MK37 MK377 1/" & 3/4".5 (,15) SST 15 (8,6) N/A (DN15 & ) 4.4 (3,78) Jorcote 5 (17,4) N/A 1/" (DN15).5 (.15) Jorcote N/A 5 (17,4) 3/4" (DN) 4.4 (3,78) Jorcote N/A 15 (1,34) 1" & 1-1/4" 6.4 (5,5) SST 1 (6,89) N/A (DN5 & 3) 9.5 (8,17) Jorcote 15 (1,34) N/A 1" (DN5) 11.5 (9,89) SST N/A 1 (6,89) Jorcote N/A 15 (1,34) 1-1/4" (DN3) 13 (11,) SST N/A 1 (6,89) Jorcote N/A 15 (1,34) 1-1/" (DN4) 15 (1,9) SST 75 (5,17) 1 (6,89) Jorcote 15 (8,6) 15 (1,34) 1-1/" (DN4) (18,9) SST N/A 1 (6,89) Jorcote N/A 15 (1,34) " (DN5) 5 (1,5) SST 75 (5,17) N/A 3 (5,8) Jorcote 15 (8,6) N/A " (DN5) 34 (9,) SST N/A 1 (6,89) Jorcote N/A 15 (1,34) -1/" (DN65) 6 (51,6) Jorcote N/A 8 (5,5) 3" (DN8) 8 (68,8) Jorcote N/A 8 (5,5) -1/" (DN65) 85 (73) Jorcote 5 (17,34) N/A 3" (DN8) 13 (11) Jorcote (13,79) N/A 4" (DN1) (17) Jorcote 15 (1,34) N/A 6" (DN15) 3 (197,8) Jorcote N/A 5 (3,45) 6" (DN15) 395 (34) Jorcote 5 (3,45) N/A For smaller (Kv) values, consult the factory. Motor Specifications Please see page 3 for specific information on CML1 motor. Adjustable speed Limit switches Selectable failure mode Manual operation by hand knob --
3 Motor Specifications CML 1 Motor: 1/4" - " Valves (DN8-5) SM11 Motor: -1/" - 6" (DN65-15) Electrical Line Voltage: 1/4 VAC (switch selectable) & 4 VDC (contact factory) Conduit Entry: two 3/4" NPT or M5 Frequency: 5/6 Hz Current:.6 1 VAC Command Signal input: - Current: 4- ma - Optional control methods available upon request Optional Supercapacitor Power Backup Mechanical Max thrust: - CML 1: 1 lb. (,4 Kn) - CML 5: 5 lb. (1,1 Kn) Speed: - CML 1:.15 to.5"/sec (3,18-6,4mm/sec) - CML 5:.65 to.13"/sec (1,59-3,18mm/sec) Action: direct or reverse Environmental Temperature Limits: - CML 1: -4 F to +15 F (- C to +66 C) - CML 5: -4 F to +15 F (- C to +66 C) - Optional low temperature trim for CML motors: -4 F to +15 F (-4 C to +66 C) Enclosure: - Explosion-proof for Class I, Div. 1, Group C&D - Dust-ignition-proof for Class II, Div. 1, Group E, F, G - CML 1 / CML 5: NEMA 4 & 6 (IP67), indoor or outdoor Approvals - CML 1 / CML 5: ATEX, FM, CSA (excluding supercapacitor backup and local controls) Electrical 1VAC, Single Phase Modulating Duty Running Current:.7 amps Frequency: 5/6 Hz Stall Current:.31 amps 4VDC, Permanent Magnet, Modulating Duty (Note: internal amplifier uses 4VDC power supply; external amp requires 115VAC power supply) Running Current: 1. amps Stall Current: 4.8 amps Control Signal Standard Input Signal: on/off Optional Input Signals (requires amplifier) - Resistance Command: -1 ohms - Current Command: 1-5mA DC; 4-mA DC; 1-5mA DC; split ranges upon request - Voltage Command: -4VDC; -1VDC Motor Enclosures Temperature Limits: -4 F to 15 F (-4 C to 65 C) Standard: NEMA 1 inside industrial Optional: Explosion-proof for Class I, Div. I, Group C & D; Dust-ignition-proof for Class II, Div. I, Group E, F, G; Type 4 (IP65), indoor or outdoor (optional) Amplifier Enclosures (Optional) NEMA 1: inside industrial; NEMA 4: water-tight; NEMA 7 & 9: explosion-proof. Note: internal amplifiers are available for AC motor in 4-mA; for DC motors in 4-mA or -1 VDC; panel-mounted amplifier also available. Internal amplifiers require NEMA 4 or 7/9 motor enclosures. Net Loading Effect on Electronic Controller 7 ohms (1-5mA) 47 ohms (4-mA) 7 ohms (1-5mA) -3-
4 Flow Chart for Mark 37 Valve 1/" & 3'4" (DN15 & DN) 1" & 1-1/4" (DN5 & DN3) at Travel 1% % 3% 4% 5% 6% 7% 8% 9% 1% F L /" (DN4) " (DN5) Flow Chart for Mark Equal Percentage Equal Percentage Equal Percentage Equal Percentage Equal Percentage Equal Percentage
5 Dimensions D D Threaded & FSW Ends 1/" - " Mat'l Dimensions (inches) (lbs.) B D B 1/" & 3/4" 1" DI/BRZ CS/SS DI/BRZ CS/SS /4" DI/BRZ C C 1-1/" DI/BRZ CS/SS A A 1 A " DI/BRZ CS/SS Flanged Ends, 1/" - " 1/" 3/4" 1" 1-1/4" 1-1/" " Flange Dimensions (inches) A1 B* C** D (lbs.) 15# # # # # # # # # # # # Flanged Ends, DN15 - DN5, Metric Flange (PN) Dimensions (mm) A1 B* C** D (kg) 1/ , ,1 1,9 5/ , 55 18,1 1, 1/ , ,1 11,8 5/ , ,1 13, 1/ , ,1 13, 5/4 16 5, ,1 14,1 1/ , ,1 1,7 5/4 18 5, ,1 14,5 1/16 58, 7 18,1 14,1 5/4 58, 7 18,1 17, 1/ , ,1 16,8 5/ , ,1, * An additional 5-3/4" is needed to remove motor cover from electrical connections * CML 1 & CML 5 have same mounting dimensions Threaded & FSW Ends, DN15 - DN5, Metric (DN) 15 & 5 Mat'l Dimensions (mm) (kg) DI/BRZ 9 495, ,1 1, CS/SS , ,1 1,4 DI/BRZ 15 5, ,1 1,9 CS/SS 15 5, ,1 11,3 3 DI/BRZ 15 5, ,1 1,9 4 5 DI/BRZ , 67 18,1 11,3 CS/SS , 7 18,1 11,8 DI/BRZ , ,1 1, CS/SS , ,1 13,6 Flanged Ends, -1/" - 6" -1/" 3" 4" 6" Flange Dimensions (inches) (lbs.) 15-15# # # # # # # # Flanged Ends, -1/" - 6" (DN) Flange (PN) Dimensions (mm) (kg) 1/ / / / / / / /
6 MK37/377/118 Ordering Schematic To specify a MK37/377 Final Control Element, build a model number by making a selection from each category in the Product Designator Coding System below. 1 3 / Model 37 Standard 377 Equal Percentage Version Inches DN Inches DN 5 1/4" DN /" DN4 38 3/8" DN1 " DN5 5 1/" DN15 5-1/" DN /4" DN 3 3" DN8 1 1" DN5 4 4" DN /4" DN34 6 6" DN15 3 Material DI Ductile Iron BR Bronze CS Carbon Steel (WCB) S6 Stainless Steel (CF8M) CI Cast Iron 4 End Connections PT NPT F5 15# FE (except IFE) BT BSPT I 5# IFE BP BSPP F 5# FE (except IFE) SW FSW I3 3# IFE I1 15# FE F3 3# FE (except IFE) F1 15# FE (except IFE) I5 15# IFE 5 Trim T3 33SS/Teflon Packing, On-Off T6 316SS/Teflon Packing, On-Off V3 33SS/Teflon Packing, Ma/Volt V6 316SS/Teflon Packing, Ma/Volt 6 Seat Materials V 33SS/Jorcote W 316SS/Jorcote C1 C Seat (Kv) MK37 MK (,18) 5.5 (,16).4 (,36) (3,78) 3.84 (,7) N 11.5 (9,91) (1,38) P 13 (11,) 5.5 (,16) S (18,9) (3,78) U 34 (9,3) (5,51) I 6 (51,7) (8,18) 8 (68,9) 9 15 (1,9) H 13 (11,1) A 5 (1,5) 3 3 (198,) B 3 (5,8) F 85 (73) H 13 (11) I (17) J 395 (34) Range 1/4" - " -1/" - 6" NF On-Off IA Internal Amp 4 4-mA NF On-Off mA 4 4-mA Ext. Amp. 1 1-mA A4 1-5mA Ext. Amp. V5-5V A5 1-5mA Ext. Amp. V1-1V A6-1/-5V Ext Amp. Actuator 1/4" - " -1/" - 6" Act/Yoke CML1 AC All Range IA Int. Amp. 4-mA X-P/Nema 4 Act/Yoke CML5 AC All Range NF On-Off or Ext. Amp. Nema 1 XP On-Off or Ext. Amp. X-P 1 Accessories SC Clean for Oil Free Service XC Clean for Oxygen Service Set Motor for 4 VAC 11 Action DD Direct RR Reverse Jordan Valve, a division of Richards Industries 317 Wasson Road Cincinnati, OH (f) jordan@richardsind.com
Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available
Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA
More informationPneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
More informationPneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
More information708MV Series Motor Valve
708MV Series Motor Valve FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708MV offers several advantages including extreme accuracy, high turndown ratios and repeatability. The features
More informationMark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES
Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced
More informationMark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
More informationMark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
More informationMark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available
Mark 78 Series Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications,
More informationMark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
More informationMark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage
Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding
More informationMark 79/79MX Series JORDANVALYE. Three-Way Control Valves
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
More informationMark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
More informationMark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators.
Mark 89/89MX Series Three-Way Temperature Regulators The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and
More informationMark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES
Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of
More informationMark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
More informationMark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
More informationMark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
More informationMark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage
Mark 75HW Series Wafer Style Hand Operated Valves The Mark 75HW is a manually operated, sliding gate control valve. The wafer style body provides great value for the end user while offering all of the
More informationControl Valves & Regulators
Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many
More information708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available
708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional
More informationJordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
More informationV1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
More informationDirect or Reverse-Acting?
Control Valves Use of Positioners Minimize the effects of friction & hysteresis / reduce dead band. Increase differential pressure capability. Permit split range operation / high rangeability in slow response
More informationMark 75PTP Series JORDANVALVE. Piston Operated Wafer Style Control Valves. CRN Registration Number Available
Mark 75PTP Series CRN Registration Number Available Piston Operated Wafer Style Control Valves The Mark 75PTP is a Mark 75 wafer style control valve with an 80mm (1" - 2"} Stainless Steel Piston Actuator.
More informationCML Electric Actuator for Baumann Series
Electronic Actuators Product Bulletin CML Electric Actuator for Baumann 4000 Series CML-50 and CML-750 electronic modulating valve actuators feature state-of-the-art brushless DC motor technology to provide
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationDM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationSM-1000 SERIES ROTARY ACTUATORS
SM-1000 SERIES ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1000 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating positioning control. Designed
More informationTHE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
More informationTHE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationFAIL-SAFE CONTROL VALVES. Fast Electrically Actuated Control Valves
Fast Electrically Actuated Control Valves FAIL-SAFE CONTROL VALVES FOR MODULATION CONTROL OF INSTANTANEOUS WATER HEATERS & HEAT EXCHANGER APPLICATIONS ARIA Overview At 2mm/sec travel speed (12 seconds/inch),
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationPython 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON
Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing
More informationFeatures Globe Valve 2-Way & 3-Way Assembly Features:
Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot
More informationVE VVG Series Electronic Two-way Valves Normally Closed
VE VVG Series Electronic Two-way s Normally Closed Document No. 155-112P25 VE VVG-1 Description The VE VVG electronic two-way valves control the flow of water or glycol solutions. The electronic actuator
More informationCOMPLETE LISTING OF OPTIONS. Toggles, Lights
COMPLETE LISTING OF Toggles, Lights A001 A002 Local Auto/Manual Toggle Switch - NEMA 4. Switch for Auto (i.e. 4-20 ma from control room), or Manual (local control at actuator). Switch is maintain type.
More informationPython Series Control Valves
Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases
More informationHigh Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
More informationMarwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
More informationControl valves with electric actuators up to 90 C PN
Features Suitable for the control of hot and chilled water (0...+90 C) in drinking water systems Valves with DVGW test mark reg. no. DW-6340BP0198 acc. latest German Drinking Water Ordinance (TrinkwV 2001)
More informationKOMBAT K1 Pneumatic Control Valve
Applications Bottle Washing Induction Furnaces Machinery Industrial Compressors Steam Tables Cold Storage Boxes Plating Tanks Cooling Ducts Heating Ducts Engine Jacket Cooling Fuel Oil Heaters Liquid Chillers
More informationINTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance
globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe
More informationVA, VF, and VS Series Direct Mounted Globe Valve Assemblies. Application. Features
TAC 1354 Clifford Avenue P.O. Box 2940 Loves Park, Illinois 61132-2940 www.invensysibs.com Two-Way and Three-Way Globe Valve Assemblies with 220 lbf Linear (979 N) Spring Return DuraDrive Actuators Submittal
More informationwww.sullivanandsons.com Engineering Services Sullivan and Sons, Inc., offers a wide range of engineering services. Our expertise can help you through each stage, including conception, design, construction,
More informationMark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
More informationMark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
More informationElectric Actuated Butterfly Valves Ductile Iron Wafer Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount wafer butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
More information3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
More informationBaumann NV Electric Actuator with Control Valves
Product ulletin D103326X012 NV Electric Actuator aumann NV Electric Actuator with 24000 Control Valves The aumann NV electric control valve series (figures 1 and 2) is specifically designed for aumann
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationManual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationSeries 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
More informationHigh Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
More informationManual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationValves and Valve Assemblies
Valves and Valve A-T Controls, Inc. Valves and valve assemblies for liquid and gas shut-off These assemblies are FM approved for use in applications requiring protection for fuel burning equipment per
More informationDBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More information3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
More informationV200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
More informationMark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
More informationMK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
More informationVA-640GSX024P. Overview. Applications. Features & Benefits. Datasheet. Large Globe Valve Actuators
VA-640GSX024P Datasheet Large Globe Actuators Overview The VA-640GSX024P Electronic valve actuators receive a 0 to 10 VDC or 4 to 20 ma control signal to proportionally control the valve. Applications
More information6801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 300, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
Features Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 598 inspection and testing API 67 5th Edition fire tested Locking
More informationMK608MM Series. Pressure Regulators Mark 608MM Self-Operated Pressure Regulator. Self-Operated Pressure Reducing Valve. Features
MK608MM Series Self-Operated Pressure Reducing Valve The MK608MM series is a spring loaded, self actuated, direct-operated valve. They are available in 1 up to 10 inches (DN25 through DN250) body sizes.
More informationMotor Valve compact 8230
Motor Valve compact 8230 GS 3 series, DN 15 up to DN 50 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.
More informationElectric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes
Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes SERIES Features Direct mount Full Port 16 Stainless Steel ball valve 2-piece ANSI Class 150 flanged body
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More informationLinear Valve Electric Actuator
Linear Valve Electric Actuator www.powervalves.nl Company Profile Company Profile Sun Yeh Electrical Ind. Co., Ltd. was founded in 1986. We always strive for technical excellence, innovation and the highest
More informationJordan Control Valve Series
Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates
More informationSeries 8000 Air Actuated Valves
Series 8000 Air Actuated Valves 10-30.3-1 Pneumatically actuated valves with powerful closing spring for reliable operation Compact design with integral solenoid, quick exhaust and position switches that
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
More informationElectric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT
Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT SERIES Features Direct mount Full Port 316 Stainless Steel ball valve 3-piece swing out body designed for easy maintenance
More informationOperating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3
Operating Instructions Pneumatic Control Valve Low Temperature Type 8026 Series GS3 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 03/2006
More informationElectronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
More informationCOMMERCIAL. Product PRofile
Product PRofile 2 PRODUCT OVERVIEW INtroduction At Bray International, Inc., our business is helping our customers with their flow control requirements. Our modular product line of butterfly, ball and
More informationElectric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe
Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe SERIES Features Wafer butterfly valve with ISO5211 direct mount actuator Unique wave line seat reduces torque
More informationSECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
More informationMark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS
Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a
More informationNorth American Automatic Manual Reset and Motorized Valves
Combustion North American Automatic Manual Reset and Motorized Valves 1516 Manual Reset 1517 Motorized 1516/1517 Automatic Oil Shutoff Valves Agency approvals: UL, FM, CSA Proof-of-Closure Switch High
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationMK508MM Series. Back Pressure Regulators Mark 508MM Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
MK508MM Series Self-Operated Back Pressure Regulators The MK508MM series are spring loaded, self actuated, direct-operated valves. The Mark 508MM Back Pressure Regulating Valves regulate upstream pressure
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
More information10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
More informationRosemount 8750WA Magnetic Flowmeter System For Water and Wastewater Industries
Product Data Sheet January 214 813-1-475, Rev FA Rosemount 875WA Magnetic Flowmeter System For Water and Wastewater Industries THE 875WA MAGNETIC FLOWMETER Rosemount reliability in a customized offering
More informationTECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationVALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationAPS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
More informationPOSITION TRANSMITTERS
POSITION TRANSMITTERS GENERAL DESCRIPTION Jordan Control s Series of position transmitters are rugged, compact industrial components that couple a precision feedback component and/or limit switches to
More informationFlowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
More informationAEL5 Series Electric Linear Actuators for DN15 to DN100 Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationAEL5 Series Electric Linear Actuators for ½" to 4" Control Valves
s Description The AEL5 series electric actuators are reversible having linear output. Available types AEL5 actuators are available with 4 supply variants, 230 Vac (2-wire, single phase), 5 Vac, 24 Vac
More information