PASSIVE OPERATION Completely self-contained with no reliance on power supplies, sensors, actuators or any external components.
|
|
|
- Mae Owens
- 6 years ago
- Views:
Transcription
1 GAS CONTROL VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER The 9 Series In-Line Detonation Flame Arreresters are designed for installation in piping systems to provide explosion protection. Introduction The 9 Series In-Line Detonation Flame Arresters are tested for actual field conditions not mandated by existing standards, including momentum impulse (long run stable detonation), thermal failure and re-ignition of downstream unburned gases providing maximum protection against all modes of flame propagation. Techincal Data TEST PROTOCOL Tested in accordance with the United States Coast Guard CFR 1. PROTECTION Bi-directional. Quenches deflagrations, stable and overdriven detonations regardless of piping configuration. Complete testing through the flame profile curve. INSTALLATION The Series 9 can be installed in the vertical or horizontal position. PASSIVE OPERATION Completely self-contained with no reliance on power supplies, sensors, actuators or any external components. MULTIPLE ELEMENT DESIGN Elements easily removed, separated and cleaned in the field. MECHANICAL DESIGN Standard construction is carbon steel housing fabricated in accordance with ASME/ ANSI with 1 R.F. line flanges. Elements are 316 stainless steel. Optional Features Arrester housing fabricated in 316 SS Class 3 ANSI R.F. or DIN mating flange connections Instrument and drain connections Special alloy fabrication and internal coatings Special surface finishes Special testing and designs Copyright 21 by Varec Biogas a Division of Westech Industrial Inc. 1
2 VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER Sizes 2-12 NEC Group D Vapors (IIA/M.E.S.G..9mm) Dimensions and Weights, inches [mm] and lbs. (kg) Size Code A Line Size A B Shipping Weight 2 [] 1 7 / 8 [3] 9 [229] 8 (36) 3 [8] 19 3 / [2] 11 [279] 13 (61) [1] 21 3 / 8 [3] 16 [6] 28 (127) 6 [1] 2 7 / 8 [67] 19 / 8 [98] 36 (166) 8 [2] 1 1 / 8 [1] 23 1/ 2 [97] 7 (336) 1 [2] 9 1 / 8 [128] 27 1 / 2 [699] 1132 (13) 12 [3] 9 [12] 32 [813] 18 (671) B Overall length may vary ±.2 (6mm) 9 IN-LINE DETONATION ARRESTER (Model 9-2) Copyright 21 by Varec Biogas a Division of Westech Industrial Inc. 2
3 VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER 9 IN-LINE DETONATION ARRESTER (Model 9-3) IN-LINE DETONATION ARRESTER (Model 9-) Copyright 21 by Varec Biogas a Division of Westech Industrial Inc. 3
4 VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER 9 IN-LINE DETONATION ARRESTER (Model 9-6) IN-LINE DETONATION ARRESTER (Model 9-8) Copyright 21 by Varec Biogas a Division of Westech Industrial Inc.
5 VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER 9 IN-LINE DETONATION ARRESTER (Model 9-1) IN-LINE DETONATION ARRESTER (Model 9-12) Copyright 21 by Varec Biogas a Division of Westech Industrial Inc.
6 VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER Ordering Information Model Description 9 Detonation Flame Arrester Code Line Size (in - ANSI 1 RF/ mm - PN16 DIN Flanges) mm 8 8mm 1 1mm 1 1mm 2 2mm 2 2mm 3 3mm Code Material of Construction (Housing) 1 Carbon Steel SS 7 3 SS 8 Hastelloy Code C E Orientation Concentric Eccentric Code Element Material 1 3 SS SS 3 Hastelloy C 2 2 (Example) Example: 12 Concentric, Detonation Flame Arrester with Carbon Steel Housing, 316SS Element and Special Paint Option. Code Options 1 Instrument/ Drain Connection 2 Special Paint 3 NDE Other Special Option - Must Specify on Purchase Order Copyright 21 by Varec Biogas a Division of Westech Industrial Inc. 6
DETONATION FLAME ARRESTER MODEL 7658A
DETONATION FLAME ARRESTER MODEL 7658A Actual Video Frame USCG Approved Successfully Tested to Procedures Approved by USCG, IMO & CSA Multiple Flow Selections per Pipe Size In-line Maintenance Available
94407 Horizontal Inline Deflagration Flame Arrester
94407 The Shand & Jurs 94407 Horizontal Inline Deflagration Flame Arrester is designed to provide a positive flame stop in horizontal gas piping systems containing flammable vapors having a low flash point.
Rev. Apr. 2/02 !# " " $%# &&% #&% #&&% &% *!)
Rev. Apr. 2/02!"!# " " " $ " % " $$!"#$% $%# #&&% &&% ' ("#$% $%# #&% &% ) *" #(+!,- (+!,- #*!) *!) +".---- #*!)./ ) ) Page 2 Series 59 INSTALLATION & MAINTENANCE MANUAL DETONATION FLAME ARRESTER SERIES
An Explosive Situation. Definitions
An Explosive Situation Explosions due to flame arrester failures are destructive, expensive and potentially deadly. Prior to 1989, no arrester provided protection against all types of flame propagation.
VAREC 5810B/5820B Series. Relief Valve and Flame Arrester
VAREC 0B/0B Series The 0B/0B Series is a combination of the 00B/00B Series and Relief Valve and the 000 Series Flame Arrester. INTRODUCTION The VAREC 0B/0B Series Relief Valve and Flame Arrester is a combination
94406 Vertical Inline Deflagration Flame Arrester. Features
94406 The Shand & Jurs 94406 Vertical Inline Deflagration Flame Arresters are designed to provide a positive flame stop on low pressure tanks or piping systems containing flammable liquids or solvents
VAREC 5910B AND 5920B SERIES RELIEF VALVE WITH FLAME ARRESTER
These units combine the high flow capacity of a pressure and vacuum relief valve with an easy-to-maintain flame arrester for maximum protection and reliable operation FEATURES 5920B Oversized pressure
COVER EQUIPMENT. VAREC BIOGAS 400W Series EMERGENCY RELIEF MANHOLE COVERS
COVER EQUIPMENT VAREC BIOGAS 400W Series EMERGENCY RELIEF MANHOLE COVERS The 400W Series is designed to provide emergency pressure and/or vacuum relief in storage tanks and vessels. Introduction The Varec
Installation, Operation and Maintenance Manual for Model 7758A Deflagration and Detonation Flame Arrester
Installation, Operation and Maintenance Manual for Model 7758A Deflagration and Detonation Flame Arrester 2010 Groth Corporation IOM-7758A Rev. B 12015 Ref. ID: 95618 TABLE OF CONTENTS: INTRODUCTION 2
In-Line Detonation Flame Arrester PROTEGO DA-CG
for unstable and stable detonations and deflagrations in a straight through design with shock absorber, bidirectional NG DN Design with one or two temperature sensors Connection to the protected side (only
Flame Arrestor Design and Application Data
Flame Arrestor Design and Application Data Please print it, fill it out and fax it to 1-352-493-2111 or scan & email to info@paradoxintellectual.com Items marked with an asterisk (*) are required fields.
Index. D Davy, Humphrey, 5, 84 Decomposition flames, flame propagation, 59
Deflagration and Detonation Flame Arresters by Stanley S. Grossel Copyright 2002 American Institute of Chemical Engineers A Acetylene, flame arrester selectioddesign criteria, 130-1 31 Alumina (ceramic)
Model 7A00 7A00 - TB TECHNICAL BULLETIN. Detonation Flame Arrestor
TECHNICAL BULLETIN 7A00 - TB 0-7 ISO Registered Company Model 7A00 Detonation Flame Arrestor OBJECTIVE The Model 7A00 detonation flame arrestor is a device that can be fitted to the opening of an enclosure
VAREC 5810B AND 5820B SERIES RELIEF VALVE WITH FLAME ARRESTER
These units combine the high flow capacity of a pressure and vacuum relief valve with an extensible bank flame arrester to provide maximum protection and reliable operation FEATURES 5820B Oversized pressure
Flame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 300. Product Description. (Vertical, in-line, deflagration)
ATEX approved Flame Arrester (Vertical, in-line, deflagration) Model Number 300 Product Description EGIL Storagetech Model Number 300 Flame Arrester is a safety device that has a flame barrier with a large
Model 6A00 TECHNICAL BULLETIN 6A00 - TB Inline Deflagration Flame Arrestor
TECHNICAL BULLETIN 6A00 - TB 0-7 ISO Registered Company Model 6A00 Inline Deflagration Flame Arrestor OBJECTIVE The Model 6A00 inline deflagration flame arrestor is a device that can be fitted to the opening
SERIES 670E End-of-Line Deflagration Flame Arrester
SERIES 670E PROTECTOSEAL CAUTION: If any questions arise concerning the proper installation or maintenance of our products, please contact Protectoseal or one of our Authorized Representatives. When installing
8 Series High Pressure Deflagration Flame Arrestor
Instruction Manual 8 Series March 2015 8 Series High Pressure Deflagration Flame Arrestor Table of Contents Introduction...1 Specifications...2 Principle of Operation...3 Factors Affecting Flame Arrestor
Flame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 320. Product Description. (Vertical, in-line, detonation )
ATEX approved Flame Arrester (Vertical, in-line, detonation ) Model Number Product Description EGIL Storagetech Model In-line Detonation Flame Arrester is designed for installation in gas pipelines. Detonation
PROTEGO Detonation Flame Arresters. Volume 4. for safety and environment
PROTEGO Detonation Flame Arresters Volume 4 for safety and environment 2 PROTEGO - at a glance More than 50 years ago, PROTEGO started developing special devices for protecting systems against explosions
Data Sheet Rotary Plug Valve Type 82.7
Data Sheet Rotary Plug Valve Type 82.7 Double eccentric control valve for process engineering and industrial applications Valve Size DN 25 to 25 NPS 1 to 1 Nominal Pressure PN 1 to PN 4 CL 15 and 3 Temperature
Installation, Operation and Maintenance Manual for Flame Check
Installation, Operation and Maintenance Manual for Flame Check Model 7622B 2014 Groth Corporation IOM-7622B Rev. C 12444 Ref. ID: 98172 Page 2 of 9 Table of Contents SECTION PAGE I. Introduction 3 II.
ORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
Flame arresters/vents
Flame arresters/vents Product information serving the gas industry worldwide Introduction RMG-GASELAN Regel- und Messtechnik GmbH is a company based in Germany. We produce devices and safety systems recommended
EN-DFA Series Detonation Flame Arrestor (ATEX Approved)
Instruction Manual D103585X012 September 2017 EN-DFA Series EN-DFA Series Detonation Flame Arrestor (ATEX Approved) Table of Contents Introduction...1 Product Description...1 Specifications...2 Principle
7 Series Flame Arrestor
Instruction Manual Series February 201 Series Flame Arrestor Table of Contents Introduction...1 Specifications...2 Principle of Operation... Factors Affecting Flame Arrestor Performance... Installation...
PROTEGO Detonation Flame Arresters. Volume 4. Volume 4. for safety and environment
PROTEGO Detonation Flame Arresters Volume 4 Volume 4 Detonation Flame Arrester Function and description The function of fl ame arresters in the various combustion processes and applications is discussed
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
Installation, Operation & Maintenance. Model 7688 In Line Deflagration Flame Arrester. ATEX Certified
Installation, Operation & Maintenance Model 7688 In Line Deflagration Flame Arrester ATEX Certified January 2, 2012 IOM-7688 Rev. A 12188 Ref. 97291 1 Section Table of Contents Page Introduction 2 Certification
Why use a flame arrester?
Why use a flame arrester? A concise guide Elmac Technologies Limited Greenfield Flintshire United Kingdom CH8 9DP T +44 (0) 1352 717600 F +44 (0) 1352 717642 E sales@elmactechnologies.com www.elmactechnologies.com
Quality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
AEGIS RSS Series. Fully Lined Bellows Sealed Control Valves. RSS Series
Fully Lined Bellows Sealed Control Valves Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty Paraflon bellows Special designs for chlorine and high-purity media ASSOCIATE CHLORINE
Biogas safety control equipment
Biogas safety control equipment As environmental concerns and energy efficiency are increasing, efficient economical and safe gas control systems become an increasingly important part of operating the
Installation in Process Systems
6 Installation in Process Systems 6.1. Design Considerations with Respect to Other System Components When a flame arrester is installed in a system, consideration must be given to how it may adversely
In-Line Detonation Flame Arrester PROTEGO DA-SB. for stable detonations and deflagrations in a straight through design with shock tube, bidirectional
for stable detonations and deflagrations in a straight through design with shock tube, bidirectional ROTEGO DA-SB Ø a DN Design with one or two temperature sensors DN NG c dismantling dimension for servicing
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
Maxifluss Rotary Plug Valve. VETEC Type Double eccentric control valve for process engineering and industrial applications
Maxifluss Rotary Plug Valve VETEC Type 73.7 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to DN 5 NPS 1 to NPS 2 Nominal pressure PN 63 to PN 16 ANSI
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
DFA Series Detonation Flame Arrestor (USCG/ATEX Approved)
Instruction Manual D1009X012 DFA Series March 201 DFA Series Detonation Flame Arrestor (USCG/ATEX Approved) Table of Contents Introduction...1 Specifications...2 Principle of Operation... Factors Affecting
The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout
Data Sheet Rotary Plug Valve Type 72.3
Data Sheet Rotary Plug Valve Type 72.3 Double eccentric control valve for process engineering and industrial applications Valve Size DN 25 to 500 NPS 1 to 20 Pressure Rating PN 10 to 40 Class 150 and 300
Maxifluss Rotary Plug Valve. VETEC Type Double eccentric control valve for process engineering and industrial applications
Maxifluss Rotary Plug Valve VETEC Type 82.7 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to DN 25 NPS 1 to NPS 1 Nominal pressure PN 1 to PN 4 ANSI
Tank Fittings, Flame Arresters, Valves, Gauges, & Accessories
Tank Fittings, Flame Arresters, Valves, Gauges, & Accessories Tank Fittings & Flame Arresters by Shand & Jurs Today s growing markets call for keeping an increasingly larger supply of your products close
In-Line Detonation Flame Arrester PROTEGO DA-SB. for stable detonations and deflagrations in a straight through design with shock tube, bidirectional
for stable detonations and deflagrations in a straight through design with shock tube, bidirectional Ø a 1 Design with one temperature sensor 2 3 Connection to the protected side (only for type DA-SB-T-...)
Model CO Compact Orifice for use with Foxboro Differential Pressure Transmitters
Product Specifications Model CO Compact Orifice for use with Foxboro Differential Pressure Transmitters PSS 3-5A1 E MODEL CO WITH TRADITIONAL STRUCTURE MODEL CO WITH LOW PROFILE STRUCTURE (LP1) MODEL CO
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation
Maxifluss Rotary Plug Valve. VETEC Type Double eccentric control valve for process engineering and industrial applications
Maxifluss Rotary Plug Valve VETEC Type 73.7 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to DN 5 NPS 1 to NPS 2 Nominal pressure PN 63 to PN 16 ANSI
The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating ANSI 150 General : The series 10 butterfly valves has been developed for a large number of applications
Differential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
Universal APU2 Pump Automotive Paint Series
Universal APU2 Pump Automotive Paint Series New levels of performance. Reduced paint shop and mix room costs. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing
LANDFILL GAS ELEVATED (CANDLESTICK) FLARE SYSTEM
LANDFILL GAS ELEVATED (CANDLESTICK) FLARE SYSTEM Part 1. General 1.01 Description A. This section describes a candlestick flare system for the combustion of landfill gases. The flare system must be of
Flame-transmission-proof KITO devices for storing and transporting combustible fluids, vapours and gases
Flame-transmission-proof KITO devices for storing and transporting combustible fluids, vapours and gases Typical KITO flame arrester elements, which prevent the propagation of flames and explosions (both
PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
Describe Flame Arrestor Operation and Maintenance Human Development Consultants Ltd.
Training Module Describe Flame Arrestor Operation and Maintenance Human Development HDC Human Development All rights reserved. No part of this publication may be copied, reproduced, stored in a computer
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
Installation, Operation & Maintenance. Model 7678 End of Line Deflagration Flame Arrester ATEX Certified
Installation, Operation & Maintenance Model 7678 End of Line Deflagration Flame Arrester ATEX Certified January 2, 2012 IOM-7678 Rev. A 12187 Ref. 97290 Table of Contents Section Page Introduction 2 Certification
The EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric.
Typical Applications EPSILON Flowmeter The EPSILON flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and the power
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
Magnetic-inductive flow meter for hazardous areas
Magnetic-inductive flow meter for hazardous areas Technical Datasheet EPX / UMF3 high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Amal are not only known for the high quality of their products but also for the exemplary levels of commitment and dedication shown to their
Amal are not only known for the high quality of their products but also for the exemplary levels of commitment and dedication shown to their customers.this commitment to complete customer satisfaction
Maxifluss Rotary Globe Valves VETEC Type 82.7
Maxifluss Rotary Globe Valves VETEC Type 82.7 ANSI version Application Double-eccentric valve for process engineering and industrial applications Valve size NPS 1 to NPS 10 Pressure rating Class 150 and
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ORIMAS Mass Flowmeter
Typical Applications ORIMAS Mass Flowmeter The ORIMAS mass flow meters measure the mass flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical
DP163, DP163G and DP163Y Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
WE CONTROL WHAT MATTERS
WE CONTROL WHAT MATTERS Valve control solutions for gas processing plants Industrial Control Valves and Regulators Ramén Valves Control Made in Sweden Industries Ramén Ball Sector Valve Type KS, designed
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Universal APU2 Pumps AUTOMOTIVE PAINT SERIES
Universal APU2 Pumps AUTOMOTIVE PAINT SERIES For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing and application of external circumferential, piston (ECP)
Varec Series 5000/5010 Flame arresters Instruction, operation and maintenance manual
Varec Series 000/0 lame arresters efore installation these instructions must be fully read and understood 000 series - vertical isclaimer of warranties 0 series - horizontal The contract between the seller
Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
Model DFA Detonation Flame Arrestor. Model DFA North America Only. Table of Contents. Introduction WARNING. Product Description
Instruction Manual D104263X012 Model DFA 7236 March 2018 Model DFA 7236 Detonation Flame Arrestor Table of Contents Introduction...1 Principle of Operation...2 Specifications...2 Factors Affecting Flame
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Model 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
MAGNETIC LEVEL GAUGES
MAGNETIC LEVEL GAUGES ARCHON S magnetic gauges are proven method to measure liquid levels. Our gauges are the safest and most economical way to measure and control your level requirements. They can be
FLAME PROPAGATION RESEARCH IDENTIFIES VAPOUR HANDLING HAZARDS. Abstract
FLAME PROPAGATION RESEARCH IDENTIFIES VAPOUR HANDLING HAZARDS Abstract Flame propagation research has identified hazards in vapour handling systems. Flame propagation is adversely affected in vapour handling
PUMP TYPE SERIES SLM AVP ACCORDING TO API 685
Production range pumps: Pumps with magnet drive E Chemical centrifugal pumps according to DIN EN E Centrifugal pumps according to ANSI B. E Centrifugal pumps for refinery and petrochemical applications
Features Enclosed Burner. Enclosed Burner. No visible flame. Controlled Combustion environment with natural draft design
97311 The S&J 97311 Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This
Valves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
Electro-Magnetic Flowmeters Sensors MagMaster MFE
Data Sheet (US) Electro-Magnetic Flowmeters Sensors MagMaster MFE Unrivalled flow performance ±0.2% accuracy. Pulsed DC Technology Incorporates Benefits of AC Systems Operable flow range of 1000:1. Two-year
Differential Pressure - Primary Flow Element Wedgemeter II Series WM: C/F/P
Data Sheet D-FW-Wedge-WM(CFP)_5 Differential Pressure - Primary Flow Element Wedgemeter II Measures Liquids, Gas and Steam High Accuracy ±0.5% of rate Bi-directional flow Low Reynolds number measurement
KITO explosion and endurance burning flame arrester devices
KITO flame arresters and fittings for the storage and transportation of inflammable liquids, vapours and gases. Designed to prevent fire penetration, explosions and detonations in tank installations of
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Maxifluss Rotary Plug Valve VETEC Type 73.3
Maxifluss Rotary Plug Valve VETEC Type 73.3 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to DN 25 Nominal pressure PN 63 to PN 16 Temperature 1 to
Flame arresters 4301A/4319A ATEX Approved
Flame arresters 4301A/4319A ATEX Approved The Whessoe Vapour Control range of flame arresters are designed and certified for use in conjunction with Whessoe pressure and vacuum valves, as well as for use
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
BGN. All Metal Variable Area Flow Meter. Technical Data Sheet
All Metal Variable Area Flow Meter BGN Technical Data Sheet Extremely robust through star guiding system instead of guiding rod Flow metering of liquids, gases and steam Available up to nominal size of
Lined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
marine cargo systems Edition:
Butterfly valves for Si-206 EN marine cargo systems Edition: 2007-05 Type MTV Type MTVL Wafer design Lugged design Nominal pressure PN 10-25 ANSI 150 Nominal size DN 80-400 Material Stainless steel The
APPLICATIONS IN PALM OIL MILL - CONTROL VALVE - DESUPERHEATER -PRDS -FLOWMETER -GAUGES
ENGINEERING (M) SDN BHD 18, JALAN 18, TAMAN SRI KLUANG, 86000 KLUANG, JOHOR, MALAYSIA. TEL : +607-777 1055 FAX : +607-777 1066 E : sales@leesonmech.com W : www.leesonmech.com APPLICATIONS IN PALM OIL MILL
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
SECTION 1 Grooved Fittings
Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded
Maxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal