Model 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
|
|
|
- Millicent Norris
- 5 years ago
- Views:
Transcription
1 Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300# 600#/900#/1500# RF Materials EN / ASTM / ASME Material Carbon steel A 216 WCB Inspection EN / 7 API STD 527 MSS-SP-55 Stainless steel A 351 CF3M Tolerances EN and ASME UG-126 Special constructions Temperature range -28ºC to +400ºC Stainless steel -96ºC to +400ºC Palanca manual Palanca estanca Lifting device Sealed packing lever Construction and materials Item Description Material Material Carbon Steel Stainless steel 1 Nozzle AISI-304 AISI-316L 2 Body A216 WCB A351 CF-3M 3 Bonnet A216 WCB A351 CF-3M 4 Cap A351 CF 8 A351 CF 8 5 Disc AISI-316L AISI-316L 6 Guide AISI-316L AISI-316L 7 Push Road AISI-316L AISI-316L 8 Spring Button C. Steel zn. AISI Ajusting Screw AISI-420 AISI Tensor Nut C. Steel zn. AISI Spring Carbon Steel AISI Lever A351 CF 8 A351 CF 8 17 Release nut AISI-316L AISI-316L 18 Lever axis AISI-303 AISI Packing lever axis AISI-303 AISI Gasket NBR+MF NBR 21 Gasket NBR+MF NBR 22 Gasket Viton Viton 27 Bellow AISI-316 TI AISI-316 TI 28 Soft seat Viton / PTFE Viton / PTFE 24 Screw-nut Carbon Steel AISI-316 T. Prueba Test gag Cpo. intermedio abierto Open bonnet Fuelle Bellows Recommended spare parts Obturador o-ring Disc soft seat Technical information Applications Min. Set pressure Seat Overpressure Steam, gases, vapours and liquids 0,2 barg metal-metal, PTFE, Viton, Nozzle SS+Stellite ( 600#, 900#&1500#) 10% for steam, gas and vapour 20% for fire exposure 25% for liquid on thermal relief Blowdown 7% Tolerance Set pressure ± 3% Discharge coefficients k= 0,975 for gases k= 0,64 for liquids ISO 9001 PED 97/23/EC , S.A. Edition 01/10 pag. 9
2 Dimensions # RF # RF # RF # RF # RF Orif. Dimension (mm) Dimension (mm) Dimension (mm) Dimension (mm) Dimension (mm) Area Valve Size A C Weight Valve Size A C Weight Valve Size A C Weight Valve Size A C Weight Valve Size A C Weight Design (mm2) ANSI rating B (kg) ANSI rating B (kg) ANSI rating B (kg) ANSI rating B (kg) ANSI rating B (kg) 1/2" D/E 1" /2" D/E 1" ,3 1/2" D/E 1" ,5 150# /150# # /150# # / 150# 105 3/4" D/E 1" /4" D/E 1" ,3 3/4" D/E 1" ,5 150# /150# # /150# # / 150# 105 D / E 1" D/E 1" " D/E 1" ,3 1" D/E 1" ,5 71/ # /150# # /150# # / 150# 105 1" D/E 2" ,2 1" D/E 2" ,5 1" D/E 2" /2"D/E 2" /2"D/E 2" # /150# # /150# # / 150# # / 300# # / 300# 105 F 1 1/2" F 2" /2" F 2" /2" F 2" /2" F 3" /2" F 3" # /150# # /150# # / 150# # / 300# # / 300# 124 G 1 1/2" G 3" /2" G 3" /2" G 3" /2" G 3" # /150# # /150# # / 150# # / 300# /2" H " /2" H " H 150# /150# # /150# "H 3" "H 3" "H 3" " H 3" # /150# # / 150# # / 150# # / 300# 154 2" J 3" " J 3" J 150# /150# # /150# " J 4" " J 4" " J 4" " J 4" # /150# # / 150# # / 150# # / 300# 184 K 3" K 4" " K 4" " K 4" " K 6" " K 6" # /150# # /150# # / 150# # / 150# # /300# 198 3" L 4" " L 4" L 150# /150# # /150# " L 6" " L 6" " L 6" " L 6" # /150# # / 150# # / 150# # / 150# 197 M 4" M 6" " M 6" " M 6" " M 6" # /150# # /150# # / 150# # / 150# 197 N 4" N 6" " N 6" " N 6" " N 6" # /150# # /150# # / 150# # / 150# 197 P 4" P 6" " P 6" " P 6" " P 6" # /150# # /150# # / 150# # / 150# 225 Q 6" Q 8" " Q 8" " Q 8" # /150# # /150# # / 150# 240 R 6" R 8" " R 8" " R 10" # /150# # /150# # / 150# 240 T 8" T 10" " T 10" # /150# # /150# 276, S.A. Edition 01/10 pag. 10
3 Model 1415 B Big size TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300# RF Materials EN / ASTM / ASME Material Carbon steel A 216 WCB Inspection EN / 7 API STD 527 MSS-SP-55 Stainless steel A 351 CF3M Tolerances EN and ASME UG-126 Special constructions Temperature range -28ºC to +400ºC Stainless steel -96ºC to +400ºC Palanca manual Palanca estanca Lifting device Sealed packing lever Construction and materials Item Description Material Material Carbon Steel Stainless steel 1 Nozzle AISI-304 AISI-316L 2 Body A216 WCB A351 CF-3M 3 Bonnet A216 WCB A351 CF-3M 4 Cap A351 CF 8 A351 CF 8 5 Disc AISI-316L AISI-316L 6 Guide AISI-316L AISI-316L 7 Push Road AISI-316L AISI-316L 8 Spring Button C. Steel zn. AISI Ajusting Screw AISI-420 AISI Tensor Nut C. Steel zn. AISI Spring Carbon Steel AISI Lever A351 CF 8 A351 CF 8 17 Release nut AISI-316L AISI-316L 18 Lever axis AISI-303 AISI Packing lever axis AISI-303 AISI Gasket NBR+MF NBR 21 Gasket NBR+MF NBR 22 Gasket Viton Viton 27 Bellow AISI-316 TI AISI-316 TI 28 Soft seat Viton / PTFE Viton / PTFE 24 Screw-nut Carbon Steel AISI-316 T. Prueba Test gag Cpo. intermedio abierto Open bonnet Fuelle Bellows Recommended spare parts Obturador o-ring Disc soft seat Technical information Dimensions Inlet Outlet Orifice Area A B C Weight Applications Steam, gases, vapours and liquids (mm 2 ) (mm) (mm) (mm) (kg) Min. Set pressure 0,2 barg 12" 16" W Seat metal-metal, PTFE, Nozzle SS+Stellite 16" 20" X Overpressure 10% for steam, gas and vapour 20% for fire exposure 25% for liquid on thermal relief Blowdown 7% Tolerance Set pressure ± 3% Discharge coefficients k= 0,975 for gases k= 0,64 for liquids ISO 9001 PED 97/23/EC , S.A. Edition 01/10 pag. 9
4 Serie # Capacity AIR / Caudal de aire Flanges / Brida s ANSI B16.5 1" x 1" 1" x 1" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 6"x 8" 6" x 8" 8" x 10 D E F G H J K L M N P Q R T 9, , Presión Area (pulgadas cuadradas) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, , , , , , ºC 5, , , , , Flow capacity / Caudal de aire (kg/h), S.A. Edición 01/10
5 Serie # Capacity AIR / Caudal de aire Flanges / Brida s ANSI B16.5 1" x 1" 1" x 1" 11/2"x3" 2" x 3" 3" x 4" 6" x 8" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 4" x 6" 6"x 8" 6" x 10" 8" x 10 D E F G H J K L M N P Q R T 9, , Presión Area (pulgadas cuadradas) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, , , , , , , , , , , ºC Flow capacity / Caudal de aire (kg/h), S.A. Edición 01/10
6 Serie # Capacity AIR / Caudal de aire Flanges/ Bridas ANSI B16.5 1" x 1" 1" x 1" 6" x 8" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 4" x 6" 6" x 8" 6" x 10" D E F G H J K L M N P Q R 9, , Presión Area (pulgadas al cuadrado) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, ºC Max. 21 barg Flow capacity / Caudal de aire (kg/h), S.A. Edición 01/10
7 Serie # Capacity saturated steam/ Caudal vapor saturado Flanges / Brida s ANSI B16.5 1" x 1" 1" x 1" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 6"x 8" 6" x 8" 8" x 10 D E F G H J K L M N P Q R T 9, , Presión Area (pulgadas cuadradas) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, , , , , , ºC 5, , , , , Flow capacity / Caudal (kg/h), S.A. Edición 01/10
8 Serie # Capacity saturated steam/ Caudal vapor saturado Flanges / Brida s ANSI B16.5 1" x 1" 1" x 1" 11/2"x3" 2" x 3" 3" x 4" 6" x 8" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 4" x 6" 6"x 8" 6" x 10" 8" x 10 D E F G H J K L M N P Q R T 9, , Presión Area (pulgadas cuadradas) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, , , , , , , , , , , ºC Flow capacity / Caudal (kg/h), S.A. Edición 01/10
9 Serie # Capacity saturated steam/ Caudal vapor saturado Flanges/ Bridas ANSI B16.5 1" x 1" 1" x 1" 6" x 8" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 4" x 6" 6" x 8" 6" x 10" D E F G H J K L M N P Q R 9, , Presión Area (pulgadas al cuadrado) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, ºC Max. 21 barg Flow capacity / Caudal (kg/h), S.A. Edición 01/10
10 Serie # Capacity water / Caudal de agua Flanges / Brida s ANSI B16.5 1" x 1" 1" x 1" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 6"x 8" 6" x 8" 8" x 10 D E F G H J K L M N P Q R T 9, , Presión Area (pulgadas cuadradas) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, , , , , , ºC 5, , , , , Flow capacity / Caudal (kg/h), S.A. Edición 01/10
11 Serie # Capacity water / Caudal de agua Flanges / Brida s ANSI B16.5 1" x 1" 1" x 1" 11/2"x3" 2" x 3" 3" x 4" 6" x 8" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 4" x 6" 6"x 8" 6" x 10" 8" x 10 D E F G H J K L M N P Q R T 9, , Presión Area (pulgadas cuadradas) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, , , , , , , , , , , ºC Flow capacity / Caudal (kg/h), S.A. Edición 01/10
12 Serie # Capacity water / Caudal de agua Flanges/ Bridas ANSI B16.5 1" x 1" 1" x 1" 6" x 8" 1" x 2" 1" x 2" 11/2"x2" 11/2"x3" 2" x 3" 3" x 4" 3" x 4" 4" x 6" 4" x 6" 4" x 6" 4" x 6" 6" x 8" 6" x 10" D E F G H J K L M N P Q R 9, , Presión Area (pulgadas al cuadrado) (barg) 0,11 0,196 0,307 0,503 0,785 1,287 1,838 2,853 3,6 4,34 6,38 11, ºC Max. 21 barg Flow capacity / Caudal (kg/h), S.A. Edición 01/10
13 Certificates ISO EN EN English EN EN ATEX AQUILES ATEX ATEX ATEX, S.A. Edition 01/10 Pag. 1
14 Accesories Lifting device Test gag Manual lifting device. Steam service must have lifting device. To test pressure of the installation. After testing test gag must be removed. Test gag is possible for safety transport of the valve. Lift indicator Packing lever Proximity swith and valve position indicator. Inductive prox 3-wire switching type Supply voltage 20 to 264 VAC, 50/60 Hz. Enclosure ratings IEC 144 IP67 Option Eex / ATEX Manual lifting device. This system to ensure that fhe fluid do not escape to the atmosphere. Nozzle ring/blowdown ring Specials spring To help the control flow cpacity. Ajustable blowdown Carbon steel 120º C Chrome Vanadium 219ºC S.S. AISI º C Inconel X º C Bellows Trim in hastelloy To protect: Nozzle and disc: Hastelloy C 276 Constant back pressure ( Nickel-molybdenum-tungsten alloy) Variable back pressure Excellent general corrosion resistence Material: S.S. AISI-316TI Rest of valve: S.S. AISI-316L Max. Back pressure 40% Bursting disc Stellite in the seat Heating Jacket In PN-63, PN-100 Areas of application are system 600#, 900# and 1500# to be protected from media which are viscous and have BELLOW tendency to cristallise. Material: S.S. AISI-316L, S.A. Pag. 16
Palanca manual Lifting device. Obturador o-ring Disc o-ring 28 Soft seat Viton / PTFE Metal. Inlet Outlet Orifice Area A B C Weight
Model 1216F TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation EN-4126-1 / 7 Connections Threaded BSP / NPT Design EN-12516-1, EN-4126-1 / 7 Rating PN-40 DIN 259 and
Safety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
TOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
Table of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.
Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3
API CATALOG. Flanged Safety Relief Valves Series 526. The-Safety-Valve.com
API Flanged Safety Relief Valves Series 526 CATALOG The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application API High Performance Series 526 Type 526 Compact Performance
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
Spring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
/ Catlg.Val Nacional-16pg-ING indd 1 7/11/16 11:13
3-5111 / 3-5161 The Company Production, R+D+i, evolution. VALVULAS NACIONAL, S.A. was established in Spain in 1976. The main target was to assist the petrochemical and chemical industries emerging in Spain
Type 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
Compact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
High CATALOG 1. Performance. Flanged Safety Relief Valves Series 441 Series XXL Series 444. The-Safety-Valve.com
High Performance Flanged Safety Relief Valves Series 441 Series XXL Series 444 CATALOG 1 The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application High Performance
Index. LIST No. GENERAL INFORMATION 1/01, 1/02. General Information 1/03. Selection of Valve Types VALVE TYPE FL 441 (STANDARD PRESSURE SERIES) 2/01
Index SECTION LIST No. DESCRIPTION PAGE No. GENERAL INFORMATION General Information Selection of Valve Types /0, /0 /0 VALVE TYPE FL (STANDARD PREURE SERIES) Method of Model Numbering /0 General Arrangement
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
API Flanged Safety Relief Valves Series 526 API CATALOG. LESER worldwide. The-Safety-Valve.com. The-Safety-Valve.com
LESER UK Bristol, United Kingdom sales@leser.co.uk André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch API LESER worldwide Hong Kong LESER Shenzen, China sales@leserchina.com API Flanged Safety Relief
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
High CATALOG 1. Performance. Flanged Safety Relief Valves Series 441 Series XXL Series 444
High Performance Flanged Safety Relief Valves Series 441 Series XXL Series 444 CATALOG 1 Product Range LESER Safety Valves for every industrial application High Performance Compact Performance Series 441
SAFE - ANSI. Angle pattern safety valve 1 to 6 (DN 25 to 150) Safety valves ARI-SAFE-ANSI
SAFE - ANSI Safety valves Angle pattern safety valve 1 to 6 (DN 25 to 150) ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
High CATALOG 2. Performance. Flanged Safety Relief Valves Series 441 Full nozzle Series 458
High Performance Flanged Safety Relief Valves Series 441 Full nozzle Series 458 CATALOG 2 NH 3 HCL Product Range LESER Safety Valves for every industrial application High Performance Compact Performance
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
CHARACTERISTICS ACCESSORIES. High Efficiency Pilot Operated Safety Valves
Technical High Efficiency Pilot Operated Safety Valves are derived from the conventional valves of the same series, and retain the same orifices. They are designed and manufactured in according to the
SAFE - ANSI / -TC / -TCP / -TCS
SAFE - ANSI / -TC / -TCP / -TCS Safety valves Angle pattern safety valve 1 to 6 ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
Type 526 IC CATALOG. Flanged Safety Relief Valves API Series. The-Safety-Valve.com
Type 526 IC Flanged Safety Relief Valves API Series CATALOG The-Safety-Valve.com General Information Overview API safety valves (LESER Type 526) are flanged safety valves that meet all the requirements
Type 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
POWER APPLICATION SSR-S1000
POWER APPLICATION SSR-S1000 and SSR-S1100 COMPANY PSV is a company of PARCOL and SVC. PSV was founded in 2016 with the target of creating a flexible and high quality safety valve company. PSV combines
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
Modulate CATALOG. Action. Safety Relief Valves Series 433. The-Safety-Valve.com
Modulate Action Safety Relief Valves Series 433 CATALOG The-Safety-Valve.com Valve finder General How to find the right Product Group High operating to set pressure ratio, high backpressure or low total
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Product Range LESER Safety Valves for every industrial application Compact Performance High Performance Series
Pressure Relief Valves MPV Series. Consolidated Pilot Operated Safety Relief Valve
Pressure Relief Valves 2900 MPV Series Consolidated Pilot Operated Safety Relief Valve Table of Contents Conversion Table... 2900.2 Features & Benefits... 2900.3 Scope of Design... 2900.4 Main Valve Materials...
SVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
CROSBY J-SERIES DIRECT SPRING PRESSURE RELIEF VALVES
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design FEATURES ASME/NB certified capacities for
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
Technical Specifications Rev.A - 07/2018 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical,
Type. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an
Sarasin-RSBD STARFLOW SAFETY RELIEF VALVES. Sarasin-RSBD CONTENTS. Starflow Introduction 4-5. Description 6-7. Design Information 8-12
STARFLOW SAFETY RELIEF VALVES Quality assurance (division) Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been developed
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
Series Pilot Operated Pressure Relief Valves 0810C
Series 00 Pilot Operated Pressure Relief Valves 00C Numbering System To simplify the selection and specifying of Farris pressure relief valves, use the following type numbering system. The type numbering
2 MODEL NO. H/CC41224X3 74/CS64AA2
API TUV Method of Model Numbering For Valve Type FL H C C X 7 C S AA FL MODEL NO. H/CCX 7/CSAA ORIFICE LETTER ACC. TO API 5 MATERIAL TYPE CONNECTION RATING FOR INLET & OUTLET SPECIAL FEATURES/EXTRA ACCEORIES
Si 2323 / Si 2324 / Si 2325
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si 2323 / Si 2324 / Si 2325 Features Straightforward design for high pressures The regular flow safety
AN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Table of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
BIRKETT SAFESET SERIES PILOT OPERATED SAFETY RELIEF VALVES
Pop action and modulating pilot operated safety valves with a unique full nozzle design and dimensions to API 526 FEATURES GENERAL APPLICATION Safeset valves are self-contained pilot operated safety relief
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I.
Steam Safety Valve 9100 SAPAG High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I. Features National Board Certified to ASME I (3% overpressure,
Type 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Si 830. Engineering GREAT Solutions. High Flow Safety Relief Valves designed acc. to API Standard 526 manufactured to ASME VIII and PED
Si 83 Engineering GREAT Solutions High Flow Safety Relief Valves designed acc. to API Standard 526 manufactured to ASME VIII and PED Si 83 Contents 3 Features, applications, approvals and standards 4 General
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 462 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
Si Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Features Typical regular safety valve for many applications The modern pressure safety valve for regular
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
Compact. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
SLK SERIES SAFETY VALVES
SLK SERIES SAFETY VALVES SLK SERIES TABLE OF CONTENTS Relief Valves SLK-Series are spring loaded pressure relieving devices, suitable for discharge of compressible fluids. SLK-series safety valves are
Si 910. Engineering GREAT Solutions. Safety Valves acc. to ASME Sec. I, Sec. III and Sec. VIII
Engineering GREAT Solutions Safety Valves acc. to ASME Sec. I, Sec. III and Sec. VIII Features IMI Bopp & Reuther steam safety valve acc. to ASME Sec. I > High capacity > Fixed overpressure and blowdown
Hinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn
Hinge Pin Bearing Spring Plate Spring Disc Body Gasket Stop PIn TYPICAL MATERIAL OF MAIN PARTS No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Stop Pin 2 Gasket 3 Body 4 Disc 5 Spring 6 Spring
CROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
MFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
Type 457, 458. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metirc Units LWN E
Type 457, 458 Flanged Safety Relief Valves spring loaded Metirc Units Facts The-Safety-Valve.com LWN 468.10-E 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
Seri e s C ATA L O G. Series 526. The Safety Va l v e
API Seri e s Series 526 C ATA L O G The Safety Va l v e Type 526 Type 526 Balanced bellows design Type 526 Plain lever 3 Type 526 Open bonnet d Safety Relief s API Series Contents Contents Applications
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Si Engineering GREAT Solutions. Process and steam safety valves to PED and DIN/EN standards
Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 4302 Features Engineered with high discharge The state-of-the-art IMI Bopp & Reuther medium-pressure safety valve:
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT Features Industrial quality miniature actuator Full Port direct mount 3-way stainless steel ball valve
BALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
SV80H Safety and Relief Valves
age 1 of 18 I2 B ev.00 U S Safety and elief alves escription he S is a full nozzle safety and relief valve with orifices to, comply with the AI S 526, beyond others with super capacity. Suitable for gas,
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel)
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel) DESCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes