Test Coupling with Ball Check
|
|
|
- Emma Garrett
- 6 years ago
- Views:
Transcription
1 Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring and control of pressure Venting Sampling in ig- and low-pressure systems Advantages Test system at working pressure Leak proof connection before ball ceck is open Simple connection to measurement, control and switcing devices Self locking metal protective cap Working Pressure Max. working pressure 630 bar / 9137 PSI For SMK Type and K te recommended working pressure of fitting manufacturer sould be noted. Connection under pressure up to 630 bar / 9137 PSI max. Materials Metal parts: Standard material: Steel, black zinc/nickel-plated = C6F* (CrVI-free) Optional: Stainless Steel V2A ( / AISI 303) on request Stainless Steel V4A ( / AISI 316Ti) on request For ordering V2A or V4A please replace "C6F" wit "V2A" or "V4A". * Note: Te cangeover of our standard surface finising "zinc plated" to te cromium (VI) free surface finising "black zinc/nickel-plated" will proceed gradually. : P = NBR (Buna-N ) (Temperature range -20 C C / -4 F F) Note: Internal sealings made of FPM, even for standard NBR-type. V = FPM (Viton )* (Temperature range -20 C C / -4 F F) * Standard option for Nort America is FPM (Viton ) E = EPDM Etylene Propylene Diene Monomer Rubber (for Brake fluid, Temperature range -40 C C / -40 F F) For ordering NBR or EPDM sealings please replace "V" wit "P" or "E". Vibration safety O-ring made of NBR (Buna-N ) (standard). Media Suitable for ydraulic oils and oter Mineral oil based fluid (Ceck compatibility of seal material) For use wit oter liquid media please consult STAUFF Te complete STAUFF-Test-15-Type-SMK range is also available wit a exagonal protection cap made of steel. For ordering te exagonal protection cap version please add "-SK" to te order code. (e.g. SMK15-M10x1-VA-SK-C6F) Ball: Stainless Steel Note On request TEST 15 is also available as SKK-type including "as"- and "Filling"- versions. SMK15 Test Coupling wit Port Connection SMK15 Type Test Coupling complete wit Straigt Fitting SMK15 Type K Test Coupling for 24 Cone Fittings SSK15 Bulkead B16
2 / Order Codes Connection Tread Test 15 Test Coupling wit Port Connection SMK (.67) (.39) Tread Sealing Working Order Codes Pressure (mm /in) ( bar /PSI) 1 2 Hex (Standard Option-Nort America) M10 x 1 Type A , SMK15-M10x1-PA-C6F SMK15-M10x1-VA-C6F SMK15-M14x1,5-PB-C6F SMK15-M14x1,5-VB-C6F SMK15-M16x1,5-PB-C6F SMK15-M16x1,5-VB-C6F 1/8 Type B SMK15-1/8-PB-C6F SMK15-1/8-VB-C6F 1/ SMK15-1/4-PB-C6F SMK15-1/4-VB-C6F 3/ SMK15-3/8-PB-C6F SMK15-3/8-VB-C6F M12 x 1, SMK15-M12x1,5-PC-C6F SMK15-M12x1,5-VC-C6F SMK15-M14x1,5-PC-C6F SMK15-M14x1,5-VC-C6F Type C SMK15-M16x1,5-PC-C6F SMK15-M16x1,5-VC-C6F 1/ SMK15-1/8-PC-C6F SMK15-1/8-VC-C6F 1/ SMK15-1/4-PC-C6F SMK15-1/4-VC-C6F R1/4 K SMK15-R1/4K-PD-C6F SMK15-R1/4K-VD-C6F 1/8 NPT Type D SMK15-1/8NPT-PD-C6F SMK15-1/8NPT-VD-C6F 1/4 NPT SMK15-1/4NPT-PD-C6F SMK15-1/4NPT-VD-C6F 7/16 20 UNF , SMK15-7/16UNF-PE-C6F SMK15-7/16UNF-VE-C6F 9/16 18 UNF Type E SMK15-9/16UNF-PE-C6F SMK15-9/16UNF-VE-C6F SMK15-M14x1,5-PE-C6F SMK15-M14x1,5-VE-C6F Standard material: For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Sealing Details O-ring Type A Metal Joint Type B Elastomeric Sealing Type C Taper Type D (suitable sealant required) O-ring Type E STAUFF B Test Standard material: Steel For ordering te exagonal protection cap version please add "-SK" to te order code. (e.g. SMK15-M10x1-VA-SK-C6F) For furter information on materials, seals or protection caps, please see page B16. Oter port connections and seals on request. Please consult STAUFF for furter information. Dimensional drawings: All dimensions in mm (in). B17
3 Test 15 Connection Tread / Order Codes Test Coupling complete wit Straigt Fitting SMK15 Type Hex A SW 17 (Hex.67) Hex B Ø d Ød l2 l1 Compression ring fittings acc. to ISO / DIN 2353 Standard material: Test coupling: Straigt fitting: Steel, zinc/nickel-plated = C6F (CrVI-free) For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Standard material: Steel For ordering te exagonal protection cap version please add "-SK" to te order code. (e.g. SMK15-08L-V-SK-C6F) For furter information on materials, sealings or protection caps, please see page B16. Series PN Pipe Order Codes ( bar /PSI) Ød ~l1 l2 Hex A Hex B (Standard Option-Nort America) SMK15-06L-P-C6F SMK15-06L-V-C6F SMK15-08L-P-C6F SMK15-08L-V-C6F SMK15-10L-P-C6F SMK15-10L-V-C6F , SMK15-12L-P-C6F SMK15-12L-V-C6F L SMK15-15L-P-C6F SMK15-15L-V-C6F SMK15-18L-P-C6F SMK15-18L-V-C6F SMK15-22L-P-C6F SMK15-22L-V-C6F , SMK15-28L-P-C6F SMK15-28L-V-C6F SMK15-35L-P-C6F SMK15-35L-V-C6F , SMK15-42L-P-C6F SMK15-42L-V-C6F SMK15-06S-P-C6F SMK15-06S-V-C6F SMK15-08S-P-C6F SMK15-08S-V-C6F SMK15-10S-P-C6F SMK15-10S-V-C6F SMK15-12S-P-C6F SMK15-12S-V-C6F S , SMK15-14S-P-C6F SMK15-14S-V-C6F SMK15-16S-P-C6F SMK15-16S-V-C6F SMK15-20S-P-C6F SMK15-20S-V-C6F , SMK15-25S-P-C6F SMK15-25S-V-C6F SMK15-30S-P-C6F SMK15-30S-V-C6F , SMK15-38S-P-C6F SMK15-38S-V-C6F B18 Dimensional drawings: All dimensions in mm (in).
4 / Order Codes Connection Tread Test 15 Test Coupling for 24 Cone Fittings SMK15 Type K 35 (1.38) (1.46) 37 (1.46) 37 (1.46) SW 17 SW (Hex.67) (Hex.67) l3 HexA Hex AA Ød l3 Version A Version B Series PN Pipe Tread Version Order Codes ( bar /PSI) Ød l3 Hex A (Standard Option-Nort America) 6 15, M12 x 1,5 A SMK15-06L-PK-C6F SMK15-06L-VK-C6F 8 15, A SMK15-08L-PK-C6F SMK15-08L-VK-C6F 16, A SMK15-10L-PK-C6F SMK15-10L-VK-C6F , M18 x 1,5 A SMK15-12L-PK-C6F SMK15-12L-VK-C6F L M22 x 1,5 B SMK15-15L-PK-S-C6F SMK15-15L-VK-S-C6F 18 19, M26 x 1,5 B SMK15-18L-PK-S-C6F SMK15-18L-VK-S-C6F 22 20, M30 x 2 B SMK15-22L-PK-S-C6F SMK15-22L-VK-S-C6F M36 x 2 B SMK15-28L-PK-S-C6F SMK15-28L-VK-S-C6F M45 x 2 B SMK15-35L-PK-S-C6F SMK15-35L-VK-S-C6F M52 x 2 B SMK15-42L-PK-S-C6F SMK15-42L-VK-S-C6F 6 14, A SMK15-06S-PK-C6F SMK15-06S-VK-C6F 8 16, A SMK15-08S-PK-C6F SMK15-08S-VK-C6F , M18 x 1,5 A SMK15-10S-PK-C6F SMK15-10S-VK-C6F 12 17, M20 x 1,5 A SMK15-12S-PK-C6F SMK15-12S-VK-C6F S 14 19, M22 x 1,5 B SMK15-14S-PK-S-C6F SMK15-14S-VK-S-C6F M24 x 1,5 B SMK15-16S-PK-S-C6F SMK15-16S-VK-S-C6F M30 x 2 B SMK15-20S-PK-S-C6F SMK15-20S-VK-S-C6F M36 x 2 B SMK15-25S-PK-S-C6F SMK15-25S-VK-S-C6F M42 x 2 B SMK15-30S-PK-S-C6F SMK15-30S-VK-S-C6F M52 x 2 B SMK15-38S-PK-S-C6F SMK15-38S-VK-S-C6F For DKO connection According to ISO / DIN 2353 Version A: one-piece design Version B: screwed design Standard material: Test coupling: 24 cone fittings: Steel, zinc/nickel-plated = C6F (CrVI-free) For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Standard material: Steel For ordering te exagonal protection cap version please add "-SK" to te order code. (e.g. SMK15-08L-VK-SK-C6F) For furter information on materials, sealings or protection caps, please see page B16. STAUFF B Test Dimensional drawings: All dimensions in mm (in). B19
5 Test 15 Connection Tread / Order Codes Bulkead SSK15 SW 19 (Hex (Hex.75) max.12 (max.47) SW (Hex.75).75) SW 22 (Hex (Hex.87) max.12 (max.47) SW 22 (Hex (Hex.87) Version A Version B Also available for gaseous media type SSKK Treads * 1 Compression ring assembly 08S according to ISO / DIN 2353 Tread Version Order Codes (Standard Option-Nort America) A SSK15-P-C6F SSK15-V-C6F 72 * B SSK15/08S-P-C6F SSK15/08S-V-C6F Standard material version A: Test coupling: Standard material version B: Test coupling: Hex nut: Steel, zinc/nickel-plated = C6F (CrVI-free) For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Standard material: Steel For ordering te exagonal protection cap version please add "-SK" to te order code. (e.g. SSK15-V-SK-C6F) For furter information on materials, sealings or protection caps, please see page B16. Note: Standard option version B witout compression ring and nut. Swivel Run Tee wit JIC Connection SV-JIC Type F/M 7/16-20 UNF Hex A Hex B 37 Tread d1 37 d2 Tread l1 l4 15 (.59) l3 l2 Standard material: Steel, zinc/nickel-plated = C6F (CrVI-free) For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For furter information please consult STAUFF. Tread Order Codes inc Ø d1 Ø d2 l1 l2 l3 l4 Hex A Hex B 7/16 20 UNF 7,49 4, /16 18 UNF 11,05 8,1 10, ,5 8, /4 16 UNF 15,9 10,8 10,5 16,7 43, SV-7/16UNF-04-JIC1/4-F/M-C6F SV-7/16UNF-06-JIC3/8-F/M-C6F SV-7/16UNF-08-JIC1/2-F/M-C6F 1-1/16 12 UNF 21,6 16,9 15,4 21,9 50,4 13, SV-7/16UNF-12-JIC3/4-F/M-C6F /16 12 UNF 27,9 23,2 17,3 23,1 53, SV-7/16UNF-16-JIC1-F/M-C6F B20 Dimensional drawings: All dimensions in mm (in).
6 / Order Codes Connection Tread Test 15 Adaptor SAD15 Version A Version B Tread Version Order Codes (Standard Option-Nort America) M16 x A SAD15/20-P-C6F SAD15/20-V-C6F 39 S12 * A SAD15/12-P-C6F SAD15/12-V-C6F Plug in B SAD15/10-P-C6F SAD15/10-V-C6F Treads * 1 Special tread: buttress tread S12,65 x1,5 Standard material version A: Treaded nipple: Swivel nut: Steel, zinc/nickel-plated = C6F (CrVI-free) Standard material version B: For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". STAUFF B Test For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). HexA max. 12 (max. 47) Hex A auge Adaptor SMA15 Direct auge Adaptor SMD15 SW 19 (Hex.75) Troug ole Ø 18 (.71) M 16 x 1,5 auge Adaptor SMA15 Direct auge Adaptor SMD15 Tread Order Codes Hex A (Standard Option-Nort America) 1/ SMA15-1/4-P-OR-C6F SMA15-1/4-V-OR-C6F 1/ SMA15-1/2-P-OR-C6F SMA15-1/2-V-OR-C6F 1/4 NPT SMA15-1/4NPT-P-C6F SMA15-1/4NPT-V-C6F 1/2 NPT SMA15-1/2NPT-P-C6F SMA15-1/2NPT-V-C6F 1/ SMD15-1/4-P-OR-C6F SMD15-1/4-V-OR-C6F 1/ SMD15-1/2-P-OR-C6F SMD15-1/2-V-OR-C6F 1/4 NPT SMD15-1/4NPT-P-C6F SMD15-1/4NPT-V-C6F 1/2 NPT SMD15-1/2NPT-P-C6F SMD15-1/2NPT-V-C6F Standard material SMA15: Standard material SMD15: auge adaptor: Steel, zinc/nickel-plated = C6F (CrVI-free) Swivel nut: For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Snubber on request. Dimensional drawings: All dimensions in mm (in). B21
7 STAUFF Test eneral Tecnical Information Port Connections and Sealing Details Type A d1 30 Type A - Treaded port according to factory standard Sealing: O-ring Type A Tread M8 x 1 M10 x 1 d1 +0,1 min. min 9, , , , ,5 2,5 Type B and C Type B 0,1A A d1 Type C a Type B and C - Treaded port type X acc. to DIN 3852 Part 1 and 2; ISO (metric); ISO (inc) Sealing: Metal joint Type B / Elastomeric sealing Type C Tread d1 min. min. min. a max. M10 x M12 x 1, , , , M18 x 1, M20 x 1, M22 x 1, , /8 15 8,5 10, / ,5 15,5 1, / ,5 15, / ,5 18,5 2, Type D Type D - Parallel treaded port type Z according to DIN 3852 Part 2 (inc) Sealing: Taper Type D suitable sealant required Tread 90 min. min. Rp1/8 5,5 9, Rp1/4 8,5 13, Rp3/8 8,5 13, Rp1/2 10,5 16, B46 Dimensional drawings: All dimensions in mm (in).
8 eneral Tecnical Information STAUFF Test Port Connections and Sealing Details Type D Type D - Taper treaded port according to ANSI/ASME B (NPT) Sealing: Taper Type D suitable sealant required Tread 90 min. min. 1/8 27 NPT 6,9 11, /4 18 NPT 10 16, /2 14 NPT 13,6 22, Type E Type E - Treaded port according to ISO (metric); ISO (UNF) Sealing: O-ring Type E Tread STAUFF B Test A 0,2 A 0,1 A d2 d1 z b a d1 +0,1 d2 min. min. min. a +0,4 b max. z ±1 M10 x 1 11, ,5 1, M12 x 1,5 13, ,5 14 2,4 1, , ,5 14 2,4 1, , ,5 2,4 1, M22 x 1,5 23, ,5 18 2, M27 x 2 29, , /16 24 UNF 9, ,9 1, /16 24 UNF 12, ,5 14 2,4 1, /2 20 UNF ,5 14 2,4 1, /16 18 UNF 15, ,7 15,5 2,5 1, /8 14 UNF 23, ,7 20 2,5 2, Dimensional drawings: All dimensions in mm (in). B47
STAUFF. Test. Local solutions for individual customers worldwide
STAUFF Test ocal solutions for individual customers worldwide Walter Stauffenberg mbh & Co. K P.O.Box 745 58777 Werdol ermany Im Erenfeld 4 5879 Werdol ermany Telepone: + 49 2392 96-0 Facsimile: + 49 2392
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Quality and Service worldwide. Test 20 Typ SMK (M 16 x 2)
Quality and Service worldwide Test 20 Typ SMK (M 6 x 2) Distributor Walter Stauffenberg mbh & Co. K P.O.Box 745 D-58777 Werdol Im Erenfeld 4 D-5879 Werdol Tel. : + 49 (0) 2392 96-0 Fax: + 49 (0) 2392 2505
Catalogue 7 STAUFF Test
est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Introduction Introduction 4-11 est Couplings 12-53 est daptors 54-59 B est Hoses and Connectors 60-71 C echnical ppendix 72-77 D
Catalogue 7 STAUFF Test
est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl el.: +49 2392 91 60 Fax: +49 2392 91 61 60 E-Mail: sales@stauff.com
STAUFF Test. Test Couplings. Test Adaptors. Test Hoses and Connectors. Product Overview
Test Adaptors Test Hoses and Connectors Product Overview STAUFF Test Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design
HIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
MANN+HUMMEL Filters for Liquids
MANN+HUMML Filters for Liquids MANN+HUMML Industrial Filters Te MANN+HUMML Group is an international company wit its eadquarters in Ludwigsburg, Germany. Te group employs approx. 9500 people worldwide
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
DN crimping diameter (guide values) [mm] 2 7,0 4 9,9
![DN crimping diameter (guide values) [mm] 2 7,0 4 9,9](/thumbs/78/78659247.jpg "DN crimping diameter (guide values) [mm] 2 7,0 4 9,9")
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
Catalogue 6 STAUFF Valves
Two-Way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves Catalogue 6 STAUFF Valves Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49
Safety Switches with Separate Actuator, Plastic Housing
Safety Switces wit Separate Actuator, Plastic Housing Selection table for safety switces Mounting AS Mounting to DIN EN 5007 AB Mounting wit 0 mm spacing M SM Tread M0 x.5 for cable gland M -pin ; 6 pin
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.
General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation
Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
KFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
KFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Axial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
Crossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
DURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
KFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Type 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
GS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Industrial Couplings and Fittings
Kamlok Quick Couplings: An asymmetrical coupling system, male and female parts are locked y two andles. Hose assemly for MIL-Norm couplings wit standard clamps, for DIN EN 14 420-7 couplings wit forged
Description. Rhino EFD Bulk Unloader Packages
Rhino EFD Bulk Unloader Packages Description See Figure. The Rhino EFD Pail and -Gallon Drum Bulk Unloader Packages consist of the following major components: Pump () Controls () Frame () Follower Plate
BERMAD Irrigation. Technical Specifications. WW-700 & 800 Series Metric. 800 Metric
Tecnical Specifications -700 & 0 Series SI 700 Metric SI 0 Metric Available Sizes & Patterns DN - DN 0 - Y Pattern DN - DN 4 - Angle DN 600 - DN 0 - Globe Connection Standard Flanged: ISO 7005-2 (ISO,
Technical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
Industrial Couplings and Fittings
Kamlok Quick Couplings: An asymmetrical coupling system, male and female parts are locked y two andles. Hose assemly for MIL-Norm couplings wit standard clamps, for DIN EN 14 420-7 couplings wit forged
Air operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
Thermal Fuse Caps Description Applications Model Code Order Part No Installation Technical Data Maximum Working Pressure
Thermal Fuse Caps Thermal Fuse Caps HEX. 27 (HEX. 1.06) 40 (1.57) Description HYDAC Thermal Fuse Caps are safety devices that automatically bleed accumulator gas pressure in the event of a fire. These
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
MINIMESS Test Points
MINIMESS -15 Test Ponts +3mm wth ant vbraton O-rng Plastc wth ntegrated safety devce aganst vbraton Torque n Nm Techncal data Free cuttng steel 1.0718 Free cuttng steel 1.0718 Plastc Stanless steel 1.4571
PRESSURE MONITORING.
MONITORING PRESSURE MONITORING PRESSURE Pressure-control systems overview Technical explanations From page 8 Selection matrix Support for selection of suitable pressure switch Page 10 Pressure switches
2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
Pressure switch hex 27
Pressure switch Changeover switch with silver or gold contacts Easily adjustable switching point. Factory adjustable hysteresis (except type 0140/014. High overpressure safety and long life even under
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
Piston Accumulators. SK Series 28 INNOVATIVE FLUID POWER. Piston Accumulators. Piston Types. Description. Construction.
SK Series Piston Accumulators Piston Types TYPE 2 Without heck Valves Application (without heck Valve) Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number
Commodity valves 24 / 26
Commodity valves Industrial valves - 24 / 26 ZA.VE.RO. INDUSTRIA VAVES 0 Art. 60 BA VAVE ONE PIECES BODY - FU AND REDUCED BORE 800-500 lbs 3000-6000 psi NPT - BSP - TREATED ENDS SOFT SEATED Za.Ve.Ro. API
MANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
Schroeder Check Test Point System
Section 1: Introduction Schroeder Check test points provide a fast easy and safe way to test pressures up to 10,000 psi (680 bar) in hydraulic systems under operation. They are available in both 1620 (M16x20)
GE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
Technical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Catalogue 10 STAUFF Hydraulic Accessories
Fluid Level and Temperature Indicators Tank Filler Breathers Giant and Desiccant Air Breathers Suction Strainers Diffusors Catalogue 10 STAUFF Hydraulic Accessories Germany Walter Stauffenberg GmbH & Co.
4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
Tube Connectors. Assembly Tools and Devices. Product Overview STAUFF Connect
Tube Connectors Assembly Tools and Devices Product Overview STAUFF Connect STAUFF Connect The STAUFF Connect product group is closely aligned with the market requirements and contains an extensive range
Hydraulic & Offshore Supplies GE3 3-Way High Pressure Ball Valves Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE www.gemels.it
Type 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
Product Catalogue 2012
Grease Gun Connectors and Lubrication Accessories MATO Grease Gun Connectors Conical Connector for D-Grease fittings M10 x 1 Conical Connector for D-Grease fittings R1/8" 32 400 42 32 400 28 Pointed Connector
SPG-DIGI. Operating Instruction. Please read carefully before use!
WALTER STAUFFENBERG GMBH & CO.KG Im Ehrenfeld 4 D-58791 Werdohl Postfach 1745 D-58777 Werdohl Germany Tel.: +49 (0) 2392 / 916-0 Fax: +49 (0) 2392 / 2505 E-Mail: sales@stauff.com Internet: www.stauff.com
SECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
Grease Gun Couplers and Lubrication Accessories. Hydraulic Safety-Coupler safelock. MATO 4-Jaw Hydraulic Coupler. MATO 4-Jaw Hydraulic Coupler
Grease Gun Couplers and Lubrication Accessories Description Images and specifications can be subject to change without notice Part No. Hydraulic Safety-Coupler safelock Hydraulic safety-coupler safelock
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
4 qwer. Air Operated Valves 2/2 3/2 4/2 SERIES. Air Operated. General Service. Brass or Stainless Steel Bodies 1/4" to 2" NPT. Features.
qwer General Service Valves Brass or Stainless Steel Bodies 1/" to 2" NPT 2/2 3/2 /2 SERIES Features Unique sealing member isolates pilot air pressure from mainline fluid. Variations in pilot air pressure
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
Everything begins at one point.
MINIMESS Preface Pioneering technology and innovative solutions The company philosophy Test with confidence has a long tradition at ydrotechnik. In 964, the MINIMESS - ball sealing threaded test point
CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
0110 / 0112 / 0114 / 0116 / 0118 / 0122
00 / 02 / 04 / 06 / 08 / 022 Diaphragm pressure switches with integrated connector M. Setting ranges to up to 725 psi (50 bar) (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated
CombiTemp Accessories
CombiTemp Accessories Accessories for CombiTemp - the flexible building block system for temperature measurements Housings, standard DIN B and Bourdon-Haenni ø80 mm stainless steel Brackets for wall mounting
NEW. BERMAD Irrigation 100 Series - High Performance Valves. Water Control Solutions
NE BERMAD Irrigation ig Performance Valves ater Control Solutions 100 Series Yflow ig Performance Plastic ydraulic Control Valves Features and Benefits Durable industrial grade valve design and construction
Diaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
German Test Point Manufacturer. General Info Technical Info Sealing Types. Materials, media, standards. Test point + union 24 DIN female cone
100 0 80 20 500 40 1000 1400 60 Test Points Fittins Hose Hose for Hydraulics General Info Technical Info Sealin Types Company, terms, ISO 9001:2008 4 4 7 Materials, media, standards Stud ends, ports, sealin
MINIMESS Test Points
MINIMESS -1 Test Ponts +3 mm Metal wth ant vbraton O-rng Plastc Vbraton Proof Torque n Nm Techncal data Materal: Free cuttng steel 1.071 Metal Materal: Free cuttng steel 1.071 Plastc Materal: Stanless
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
product catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
Safety Switches with Separate Actuator, Metal Housing
Safety Switces wit Separate Actuator, Metal Housing Selection table for safety switces STA wit guard locking and guard lock monitoring Version standard TW One actuating ead made of metal TWIN, 2 actuating
BR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
Valve Blocks. For direct flanging to pressure and differential pressure transmitters. Drop-forging housing. Replaceable valve seat
Data Sheet 10/14-5.32-EN Valve Blocks For direct flanging to pressure and differential pressure transmitters Drop-forging housing Replaceable valve seat Valve stem with back-flow seal and crimped valve
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
GEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
Solenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
Thermal Fuse Caps. Thermal Fuse Caps INNOVATIVE FLUID POWER 51. Description. Applications. Model Code. Installation. Technical Data.
Thermal Fuse Caps Thermal Fuse Caps Description HYDAC Thermal Fuse Caps are safety devices that automatically bleed accumulator gas pressure in the event of a fire. These devices are installed on the HYDAC
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No