VERTICAL THRUSTER PNEUMATIC SLIDE

Size: px

Start display at page:

Download "VERTICAL THRUSTER PNEUMATIC SLIDE"

Estella Knight
5 years ago
Views:

ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting

securely hold a static tool plate in place at any point of travel desired optional cushions and port controls available ideal for

collars with shock pads are available on both extend and retract PD s Series ylinder powers this unit for extra long life with a wide

fixturing anodized aluminum tool plate has modular mounting patterns to allow the attachment of other sizes of Series Slides for -axis

1 ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series ylinder, now with improved seal & bearing support Rodlok can be added to securely hold a static tool plate in place at any point of travel desired optional cushions and port controls available ideal for applications where rod drift due to system leakage, air-line rupture, or electric power loss is unacceptable optional stroke adjustment collars with shock pads are available on both extend and retract PD s Series ylinder powers this unit for extra long life with a wide range of control and switch accessories anodized aluminum alloy body is supplied with counterbored holes for easy mounting of tooling and fixturing anodized aluminum tool plate has modular mounting patterns to allow the attachment of other sizes of Series Slides for -axis movement extra long self-lubricating bronze bushings precision ground hardened guide shafts provide smooth, precise linear motion - (00) -11

2 ORDERING DATA: SERIES SLIDES TO ORDER, SPEIFY: Product, ylinder, Type, Design No., Slide Size, Slide Travel, Tool Plate Extension, and Options. SLIDE TRAEL TRAEL SLIDE OPTIONS AE -Travel adjustment and shock pads on extension** AR -Travel adjustment and shock pads on retraction** Z1 - orrosion resistant; guide shafts are hard chrome plated stainless steel or specially coated hardened steel, and appropriate coating on ferrous parts. PRODUT S - Slide DESIGN NO. - Imperial - Metric Available in 1" [ mm] increments. Minimum travel required for all Series Slides is 1" [ mm]. onsult PD for other stroke lengths. TOOL PLATE EXTENSION Additional distance between tool plate and bearing body in 1" [ mm] increments. Leave blank if additional extension is not required. S x x - DB-M - AR-Z1 YLINDER - Series ompatible TYPE SLIDES WIT LIGT DUTY BUSINGS SLIDE BORE SAFT NOTES: 1) **Affects unit length. See option drawings for complete details. Options may decrease effective cushion length depending on position of stop collars. ) -Z1 option may have reduced cylinder performance due to chrome-plated stainless steel rod in place of chrome-plated alloy steel. ) - and - are not available in -Z1. ) ***Rodlok locking device is not available with -Z1. ) Rodlok must be ordered separately when a replacement cylinder (-) is ordered with - unit. ) *Standard ports, cushion controls, and port controls are in locations 1 &. See diagram above. Sizes and use 10- [M] ports when combined with port controls on the same surface. Options may affect unit length. See dimensional pages and option information details. Refer to this product s online catalog in the product section for complete information including related dimensions and additional specifications. See link at bottom of this page WIT YLINDER OPTIONS *DB - ushion controls on both ends (locations 1 & ) *DE - ushion controls on extend only (location 1) *DR - ushion control retract only (location ) Options may affect unit length. See unit dimension and options pages for adders. -Slide ready cylinder (xs cylinder only) replacement (see note ) - Rodlok unit includes Rodlok, adaptor, cylinder, and slide preassembled (see note ) L - BSPP Ports-standard on imperial units. L - NPT Ports. BSPP-standard on metric units M - Magnetic piston for use with PD Reed and Switches *PB - Port ontrols on both ends (locations 1 & ) *PE - Port ontrol on extend only (location 1) *PR - Port ontrol on retract only (location ) UBxx -Optional port location! WITOUT YLINDER OPTIONS 1 - No cylinder, slide section only Sizes and require a Series B ylinder only. Sizes through use an ISO /DMA compliant cylinder. SERIES 0 SOLID STATE SWITES PART NO. DESRIPTION OLOR NPN (Sink) D Solid State, m cable PNP (Source) D Solid State, m cable NPN (Sink) D Solid State, Quick onnect PNP (Source) D Solid State, Quick onnect SERIES 0 REED SWITES PART NO. DESRIPTION OLOR A/D Reed, m cable A/D Reed, Quick onnect Silver Silver Brown Tan Brown Tan -0 AD & Sizing Assistance Use PD's free online Product Sizing and AD onfigurator at (00) -11

ENGINEERING DATA: SERIES SLIDES SPEIFIATIONS OPERATING PRESSURE OPERATING TEMPERATURE TRAEL TOLERANE REPEATABILITY ELOITY LUBRIATION MAINTENANE SERIES psi min to 10 psi max [.

bar] Factory lubricated for rated life Field repairable UNIT GUIDE SAFT DIAMETER 0. 10 0. 0.0 0. 0. 0. 1.11 1.11 1 1 0 0 0 BORE DIAMETER 0. 0 0. 1.0 1. 1..0.10. 0 0 0 100 YLINDER ROD DIAMETER SLIDE EFFETIE AREA BASE WEIGT DIRETION in mm lb kg 0.

3 ENGINEERING DATA: SERIES SLIDES SPEIFIATIONS OPERATING PRESSURE OPERATING TEMPERATURE TRAEL TOLERANE REPEATABILITY ELOITY LUBRIATION MAINTENANE SERIES psi min to 10 psi max [. bar min to 10 bar max] air -0 to +10 F [- to + ] See table below in [.0 mm] of original position 0 in/sec [ m/sec] max., zero load at psi [. bar] Factory lubricated for rated life Field repairable UNIT GUIDE SAFT DIAMETER BORE DIAMETER YLINDER ROD DIAMETER SLIDE EFFETIE AREA BASE WEIGT DIRETION in mm lb kg 0.1 EXTEND (.1 x T) (.00 x T) RETRAT EXTEND (. x T) (.00 x T) RETRAT EXTEND (. x T) 1. + (.00 x T) RETRAT EXTEND (.0 x T). + (.00 x T) RETRAT EXTEND (. x T).1 + (.01 x T) RETRAT EXTEND (. x T). + (.01 x T) RETRAT EXTEND (1.1 x T) (.00 x T) RETRAT.0 0. EXTEND (1. x T) 1. + (.0 x T) RETRAT 11.1 NOTES: 1) T=Travel length inches [mm]. ) Thrust capacity, allowable mass and dynamic moment capacity must be considered when selecting a slide. ) For additional speed information, consult PD s Series ylinder pages. TYPIAL DYNAMI LOAD lb N TOTAL TRAEL TOLERANES Tolerance on nominal travel length is shown in the following table: UNIT &,, &,, & NOMINAL TRAEL in L L L 0 L 0 L 0 L 0 mm L 100 L 100 L 00 L 00 L 00 L 00 NOMINAL TRAEL TOLERANE* in mm +0.0/ / / / / / / / / / / / *NOTE: Travel tolerance values measured at 0 psi, due to impact seal design. YLINDER FORE ALULATIONS Imperial Metric F = P x A F = 0.1 x P x A F = ylinder Force lbs N P = Operating Pressure psi bar A = Effective Area in mm (Extend or Retract) Sizing & Application Assistance Use PD's free online Product Sizing Application or view the Product Sizing atalog at: (00) -11

DIMENSIONS: SERIES SLIDES K MIN U + TRAEL A N MIN R X TRU & BORE FOR DD SS W X AA* F X BB* D B 1 E LL** PORT TOOL PLATE EXTENSION U + TRAEL G X Y TREAD TRU FROM TIS SIDE BORE FROM OPPOSITE SIDE FOR P

4 DIMENSIONS: SERIES SLIDES K MIN U + TRAEL A N MIN R X TRU & BORE FOR DD SS W X AA* F X BB* D B 1 E LL** PORT TOOL PLATE EXTENSION U + TRAEL G X Y TREAD TRU FROM TIS SIDE BORE FROM OPPOSITE SIDE FOR P SS KK MAX + TRAEL L (N) LETTER DIM PD YL. BORE A B D E F G K MIN L M N MIN P R U W Y AA* BB* DD KK LL** x # / EXTENSION M M x M MODEL NUMBER x x x x x x x # / / M M x 1.0. M / / / M M x M / / / / M M10 x M G 1/ M NOTES: 1) FOR OPTION DIMENSIONS AND DETAILS, SEE OPTION PAGES ) ALL DIMENSIONS ARE ENTERED ON ENTERLINE OF UNIT UNLESS OTERWISE SPEIFIED ) UNIT TRAEL = STROKE + TOOL PLATE EXTENSION. TE TOTAL UNIT TRAEL SOULD NOT EXEED TE MAXIMUM REOMMENDED TRAEL. ) *PORTS MAY APPEAR ON EITER SIDE OF TE SLIDE ENTERLINE BASED ON OPTION OMBINATIONS. ) **ALL UNITS, EXEPT PORT WIT PORT ONTROL ON SAME SIDE, OMPLY WIT DIN PART PORT SPEIFIATIONS FOR SORT STUD AND LARGE SEALING SURFAE / / / / M M1 x M G1/ / / / 1.. / M M1 x M1. G / / / / 1..0 / M M1 x M G / / / / 1.. 1/ M M1 x M G 1/ AD & Sizing Assistance Use PD's free online Product Sizing and AD onfigurator at - All dimensions are reference only unless specifically toleranced. (00) -11

5 OPTIONS: SERIES SLIDES AE TRAEL ADJUSTMENT AND SOK PADS ON EXTENSION PB PORT ONTROLS ON BOT ENDS (standard location 1 & ) Two travel adjustment stop collars with polyurethane shock pads are used for adjustment of slide extension. The travel adjustment stop collars allow precise adjustment while the shock pads eliminate metal to metal contact, thereby reducing noise levels. DB DE DR USION ONTROL IN BOT DIRETIONS (standard location 1 & ) USION ONTROL ON EXTEND ONLY (standard location 1) USION ONTROL ON RETRAT ONLY (standard location ) 1 RETRAT END (,) PE PR PORT ONTROLS ON EXTEND ONLY (standard location 1) PORT ONTROLS ON RETRAT ONLY (standard location ) PD s Port ontrol is a built-in flow control for regulating the speed of the slide through its entire stroke. The Port ontrol operates on the meter-out principle and features an adjustable needle in a cartridge with a check seal. The self-locking needle has micrometer threads and is adjustable under pressure. The needle determines the orifice size which controls the exhaust flow rate of the actuator. The check seal expands while air is exhausting from the actuator, forcing the air to exhaust past the adjustable needle. The check seal collapses to allow a free flow of incoming air. The PD Port ontrol saves space and eliminates the cost of fittings and installation for external flow control valves. Refer to option code below left to specify port control locations. UB ALTERNATE PORT LOATION EXTEND END (1,) Location definition for ports, cushion controls, and port controls With this option, alternate port locations can be specified, providing increased flexibility and customer convenience. TRAEL ADJUSTMENT AND SOK PADS ON RETRATION PD cushions are designed for smooth deceleration at the ends of cylinder stroke. When the cushion is activated, the remaining volume in the cylinder must exhaust past an adjustable needle valve which controls the amount of deceleration. The effective cushion length for each bore size is shown in the table below. To specify alternative cushion control locations on the head or cap, see the option code below right. AR Two travel adjustment stop collars with polyurethane shock pads are used for adjustment of slide retraction. The travel adjustment stop collars allow precise adjustment while the shock pads eliminate metal to metal contact, thereby reducing noise levels. PORT ONTROL OPTIONS -P x x x Port ontrol Locations B - Both ends E - Extend end only R - Retract end only Extend Location (1 & ) Omit if -PRx Retract Location ( & ) Omit if -PEx PORT LOATION OPTIONS -UB x x Extend Location (ead) (1 & ) ushion ontrol Locations B - Both ends E - Extend end only R - Retract end only Extend Location (1 & ) Omit if -DRx Retract Location (ap) ( & ) USION ONTROL OPTIONS -D x x x Retract Location ( & ) Omit if -DEx L NPT PORTS (Metric Units) This option provides NPT ports on metric (x) units instead of the standard BSPP ports. The NPT ports are located in the same location as the BSPP ports. L BSPP PORTS (Imperial Units) Options may affect unit length. See dimensional pages and option information details. This option provides G (BSPP) ports instead of the standard NPT ports. The G (BSPP) ports are located in the same location as the NPT ports. Refer to this product s online catalog in the product section for complete information including related dimensions and additional specifications. See link at bottom of this page. - (00) -11

6 OPTIONS: SERIES SLIDES RODLOK SLIDE & RODLOK RODLOK KITS PD s Rodlok is ideal for locking the tool plate while in a static/ stationary position. When the pressure is removed from the port of the Rodlok, the mechanism will grip the piston rod of the cylinder and prevent it from moving. The loads are held indefinitely without power. Rodlok performance is application and environment sensitive (leanliness of rod or Rodlok will also affect performance). TE RODLOK IS NOT DESIGNED TO BE USED AS A PERSONNEL SAFETY DEIE. Z1 STATI LOKING FORE* lb N NOTE: *Locking force indicated above is the actual locking force with a dry clean rod and does not include any safety factor. ORROSION RESISTANT LOKING DEIE KIT ADAPTOR KIT* DEIE WEIGT lb kg OMPLETE RODLOK* NOTES: 1)*Kits ship with cylinder mounting hardware. ) Part numbers listed above are intended for replacement purposes only and are to be used specifically on slides with the - option. ) Imperial port adaptor converts port from to NPT. ) When ordering a replacement cylinder (-), Rodlok must be ordered separately. ADAPTOR WEIGT lb kg IMPERIAL PORT ADAPTOR TOTAL WEIGT lb kg NOTE: Total weight includes rod adder for -/- cylinder. This option provides a stainless steel piston rod with hard chrome plating in place of the standard hard chrome plated steel material. Guide shafts are hard chrome plated stainless steel or coated hardened steel in place of the standard material. An appropriate corrosion resistant treatment is applied to ferrous parts. M MAGNET FOR PD REED AND SOLID STATE SWITES This option equips the cylinder with a magnetic band on the piston for use with PD Reed and Solid State Switches listed below. These switches mount easily to the cylinder using T slots in the body. See the Switch section for complete switch information. Options may affect unit length. See dimensional pages and option information details. Refer to this product s online catalog in the product section for complete information including related dimensions and additional specifications. See link at bottom of this page. - (00) -11

7 OPTIONS: SERIES SLIDES AE TRAEL ADJUSTMENT AND SOK PADS ON EXTENSION AR TRAEL ADJUSTMENT AND SOK PADS ON RETRATION Two travel adjustment stop collars with polyurethane shock pads are used for adjustment of slide extension. The travel adjustment stop collars allow precise adjustment while the shock pads eliminate metal to metal contact, thereby reducing noise levels. Two travel adjustment stop collars with polyurethane shock pads are used for adjustment of slide retraction. The travel adjustment stop collars allow precise adjustment while the shock pads eliminate metal to metal contact, thereby reducing noise levels. (SOWN WIT ZERO TRAEL). [10] + TRAEL B B. []. []. [10] (N). []. [] LETTER DIM B N MODEL NUMBER x x x x x x x x NOTE: -AE and -AR options may decrease effective cushion length depending on position of stop collars Z1 ORROSION RESISTANT This option provides a stainless steel piston rod with hard chrome plating in place of the standard hard chrome plated steel material. Guide shafts are hard chrome plated stainless steel or coated hardened steel in place of the standard material. An appropriate corrosion resistant treatment is applied to ferrous parts. L NPT PORTS (Metric Units) This option provides NPT ports on metric (x) units instead of the standard BSPP ports. The NPT ports are located in the same location as the BSPP ports. L BSPP PORTS (Imperial Units) This option provides G (BSPP) ports instead of the standard NPT ports. The G (BSPP) ports are located in the same location as the NPT ports. MODEL x x x x x x x x OPTIONAL NPT PORT * * 1/ 1/ / / 1/ STANDARD BSPP PORT * * G 1/ G 1/ G / G / G 1/ *When port controls are specified on the same face as ports, the standard metric port is M and the -L option provides a 10- port. All dimensions are reference only unless specifically toleranced. (00)

8 OPTIONS: SERIES SLIDES DB USION ONTROL IN BOT DIRETIONS (standard location 1 & ) Unit shown is -DB1, cushion in location 1 (standard) on extend end and cushion in location on retract end. (Ports are shown in locations &.) RETRAT END DE USION ONTROL ON EXTEND ONLY (standard location 1) 1 DR USION ONTROL ON RETRAT ONLY (standard location ) PD cushions are designed for smooth deceleration at the ends of cylinder stroke. When the cushion is activated, the remaining volume in the cylinder must exhaust past an adjustable needle valve which controls the amount of deceleration. The effective cushion length for each bore size is shown in the table below. To specify alternative cushion control locations on the head or cap, see the option code below right. EXTEND END USION ONTROL OPTIONS -D x x x ushion ontrol Locations B - Both ends E - Extend end only R - Retract end only Retract Location (, ) Omit if -DEx Extend Location (1, ) Omit if -DRx DG D EX AROSS FLATS DG D D SOME PORT ONTROL & USION OPTION OMBINATIONS WILL MOE USION ONTROLS TO TIS LOATION LETTER DIM D DG D EFFETIE USION LENGT* MODEL NUMBER x x x x x *-AE and -AR options may decrease effective cushion length depending on position of stop collars x x x All dimensions are reference only unless specifically toleranced. (00)

9 OPTIONS: SERIES SLIDES RODLOK SLIDE & RODLOK RODLOK KITS PD s Rodlok is ideal for locking the tool plate while in a static/stationary position. When the pressure is removed from the port of the Rodlok, the mechanism will grip the piston rod of the cylinder and prevent it from moving. The loads are held indefinitely without power. Rodlok performance is application and environment sensitive (leanliness of rod or Rodlok will also affect performance). TE RODLOK IS NOT DESIGNED TO BE USED AS A PERSONNEL SAFETY DEIE. STATI LOKING FORE* lb N NOTE: *Locking force indicated above is the actual locking force with a dry clean rod and does not include any safety factor. OPERATING PRESSURE The operating pressure for the locking device is different than the operating pressure for the slide to which it is attached. The locking device of the Rodlok is designed with an operating pressure range of 0 psi minimum to 10 psi maximum [ to 10 bar]. The Series Slide with a Rodlok attached has an operating pressure range of psi minimum to 10 psi maximum [ to 10 bar]. L LOKING DEIE KIT ADAPTOR KIT* DEIE WEIGT lb kg OMPLETE RODLOK* NOTES: 1)*Kits ship with cylinder mounting hardware. ) Part numbers listed above are intended for replacement purposes only and are to be used specifically on slides with the - option. ) Imperial port adaptor converts port from to NPT. ) When ordering a replacement cylinder (-), Rodlok must be ordered separately. ADAPTOR WEIGT lb kg IMPERIAL PORT ADAPTOR TOTAL WEIGT lb kg NOTE: Total weight includes rod adder for -/- cylinder. The Rodlok locking device and adaptor can be purchased separately as kits. See chart above. The locking device and adaptor are not available with a corrosion resistant (-Z1 option) finish. L E SQ G PORT AA MAX + TRAEL LETTER DIM E G L L AA MODEL NUMBER x x x x x x x x M M M M All dimensions are reference only unless specifically toleranced. (00)

10 OPTIONS: SERIES SLIDES PB PE PR PORT ONTROLS ON BOT ENDS (standard location 1 & ) PORT ONTROLS ON EXTEND ONLY (standard location 1) PORT ONTROLS ON RETRAT ONLY (standard location ) PD s Port ontrol is a built-in flow control for regulating the speed of the slide through its entire stroke. The Port ontrol operates on the meter-out principle and features an adjustable needle in a cartridge with a check seal. The self-locking needle has micrometer threads and is adjustable under pressure. The needle determines the orifice size which controls the exhaust flow rate of the actuator. The check seal expands while air is exhausting from the actuator, forcing the air to exhaust past the adjustable needle. The check seal collapses to allow a free flow of incoming air. The PD Port ontrol saves space and eliminates the cost of fittings and installation for external flow control valves. Refer to option code below left to specify port control locations. PORT ONTROL OPTIONS -P x x x Port ontrol Locations B - Both ends E - Extend end only R - Retract end only Retract Location (, ) Omit if -PEx Unit shown is -PB1, port control in location 1 on extend end and port control in location on retract end. (Ports shown in locations &.) 1 RETRAT END Extend Location (1, ) Omit if -PRx EXTEND END DP PLS* SR1-SPOTFAE DIAMETER FOR METRI PORTS ON UNITS WIT PORT AND PORT ONTROL ON DIFFERENT SIDES. SPOTFAE DIAMETER OMPLIES WIT ISO 100 & DIN PART FOR LARGE SEALING SURFAES. SR -SPOTFAE DIAMETER FOR METRI PORTS ON UNITS WIT PORT AND PORT ONTROL ON TE SAME SIDE. SPOTFAE DIAMETER OMPLIES WIT ISO 100 & DIN PART FOR SMALL SEALING SURFAES. PLS* PS* PS* SIDE IEW EE PORT P EX AROSS FLATS LETTER DIM EE* PS* P PLS* SR1* SR DP* MODEL NUMBER x x x x x x x x M M NPT / NPT...1 G 1/ / NPT..0.0 *Dimensions shown are for units with port and port control in the same location. For units with other port and port control combinations, standard port location dimensions apply. Ports may be located on either side of the slide centerline depending on port control and cushion option combinations. in = Table information for imperial units mm = Table information for metric units G 1/ / NPT G / / NPT G / / NPT G 1/ All dimensions are reference only unless specifically toleranced. (00)

11 OPTIONS: SERIES SLIDES UB ALTERNATE PORT LOATION RETRAT END With this option, alternate port locations can be specified, providing increased flexibility and customer convenience. See option code below to specify port locations. 1 PORT LOATION OPTIONS -UB x x Extend Location (ead) (1, ) Retract Location (ap) (, ) EXTEND END Unit shown is -UB1, port in location 1 on extend end and port in location on retract end. M MAGNET FOR PD REED AND SOLID STATE SWITES This option equips the cylinder with a magnetic band on the piston for use with PD Reed and Solid State Switches listed below. These switches mount easily to the cylinder using T slots in the body. See the Switch section for complete switch information SERIES 0 SOLID STATE SWITES PART NO. DESRIPTION OLOR NPN (Sink) D Solid State, m cable PNP (Source) D Solid State, m cable NPN (Sink) D Solid State, Quick onnect PNP (Source) D Solid State, Quick onnect Brown Tan Brown Tan SERIES 0 REED SWITES PART NO. DESRIPTION OLOR A/D Reed, m cable A/D Reed, Quick onnect Silver Silver G D F B onnector Detail ABLE. I B F D onnector Detail I TOP OF OUSING S,,,, & ONLY S,, & ONLY TOP OF OUSING LETTER DIM B D F G I MODEL NUMBER x x x x x x x x *Dimension is below the indicated surface * * All dimensions are reference only unless specifically toleranced. (00)

12 PRODUT ARIATIONS: SERIES SLIDES The following are examples of Series Slide variations which can be easily configured. ontact PD for additional information on these or other configurations. Shown is a version that produces a base type slide. The cylinder, bearing housings, and base plate move and the two tool plates remain fixed. This Series Slide is fitted with travel adjustment on extend and metal sensing proximity switches in both directions of travel. These switches can easily be adapted to the Slide in place of PD s Series 0 Switches. This Series Slide has extended guide shafts and a second bearing housing attached to the cylinder cap. This configuration provides a higher load carrying capability while reducing wear. This is another variation where a second bearing housing is combined with a tool plate extension. This also provides a more rigid bearing base for higher load carrying capability (00) -11

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.