RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators

Size: px
Start display at page:

Download "RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators"

Transcription

1 RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application Technical data Medium: Filtered, lubricated or nonlubricated, compressed air Maximum Operating Pressure: 25 psig (8.6 bar) Temperature Range: Standard Nitrile Seals: 32 to 60 F (0 to 72 ) Lubrication: ll RP cylinders are prelubricated during assembly with a Teflon based grease for nonlube service and long life. Materials ylinder Body: 304 Series stainless steel Head and ap: elrin cetal Resin Piston Rod: 300 Series chrome plated stainless steel Piston: nodized aluminum alloy or stainless steel Rod & Piston Seals: Nitrile Mounting ccessories: 300 Series stainless steel elrin is a registered trademark of.i. u Pont de Nemours and ompany for its brand of acetal resin. Options selector RP 06 x N - PS Series RP Series elrin end cap RP RP Series elrin with *RP cology Seals* * cology version not available on 9/6" bore RP cylinder Bore Size 9/6" 056 3/4" 075 -/6" 06 -/2" 50 2" 200 Stroke Increments of /6" up to 36" dditional Options lternate female thread FT (_) (Specify thread type) iton seals HT** Switch rail and position M, M2, M3, M4 Side ported end cap P (N mount only) lternate port location PL(_) Plain rod end PR Magnetic piston PS Rod extension over std. RX(_) (specify additional length) Rod wiper RW lternate male thread TM (_) (Specify thread type) Thread extension over std. TX(_) (specify additional length) Bumper both ends UB Mounting Options (all models are double acting) Nose N ouble nd (with pivot hole) ouble Rod nd R ** iton seals are for chemical compatibility applications, and are not available in cology -/6" bore Rod wiper not available on 9/6" bores Our policy is one of continued research and development. We therefore reserve the right to amend, 9/09 N/US

2 Roundline Plus Stainless Steel ctuators RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators The Norgren RP Series ylinder utilizes a stainless steel body, a stainless steel rod, and elrin (acetal resin) end caps for corrosion resistance. This cylinder is designed to endure a variety of environmental conditions. The RP Series construction provides resistance to moisture, various solvents, and many other neutral chemicals. The Norgren RP Series is ideal in corrosive environment applications. dditionally, the Norgren RP Series ylinder is the only elrin end cap cylinder in the industry to offer the patented impact dampening cology Seal Technology. The cology Seal option, used in conjuction with a fixed cushion, eliminates the bacteria-collecting cushion screw orifice found in competing adjustable cushion model cylinders. 2 3 Head and ap: elrin (acetal resin) Piston Rod: hrome plated stainless steel Tube: Stainless steel Piston: nodized aluminum (stainless steel on 9/6" bore R model) Piston Seals: Nitrile (iton optional) Optional magnet on piston for position sensing elrin is a registered trademark of.i. u Pont de Nemours and ompany for its brand of acetal resin. For detailed technical specifications on the properties of elrin, please contact upont ( N/US Our policy is one of continued research and development. We therefore reserve the right to amend, 9/09

3 Roundline Plus Stainless Steel ctuators ouble cting Nose Mount (N) + STROK K MM (ROSS TS) cology Bore K or P Bumpers MM 9/6" (056) # # / / /4" (075) /8 NPT / /8-8.62/ /6" (06) /8 NPT / /8-8.62/ /2" (50) /8 NPT / / " (200) /4 NPT / /4-2.37/ PS (Magnetic Piston) length adder: -/6" & -/2" bores = 0.25". 9/6", 3/4", and 2" bores = 0.25". When PS (magnetic piston) and cology options are ordered in combination, use cology length only - do not add extra length for the magnet. ouble cting Pivot Mount () + STROK L M B MM (ROSS TS) Bore B L cology Bumpers M MM 9/6" (056) # # / / /4" (075) /8 NPT / /8-8.62/ /6" (06) /8 NPT / /8-8.62/ /2" (50) /8 NPT / / " (200) /4 NPT / /4-2.37/ PS (Magnetic Piston) length adder: -/6" & -/2" bores = 0.25". 9/6", 3/4", and 2" bores = 0.25". When PS (magnetic piston) and cology options are ordered in combination, use cology length only - do not add extra length for the magnet. ouble cting ouble Rod nd Mount (R) + (2 x STROK) Ø MM Ø MM (ROSS TS) (ROSS TS) Bore cology Bumpers MM 9/6" (056) # # / / /4" (075) /8 NPT 0.50 / /8-8.62/ /6" (06) /8 NPT / /8-8.62/ /2" (50) /8 NPT / / " (200) /4 NPT 0.8 / /4-2.37/ PS (Magnetic Piston) length adder = 0.25" for all bore sizes. When PS (magnetic piston) and cology options are ordered in combination, use cology length only - do not add extra length for the magnet. N/US

4 Roundline Plus Stainless Steel ctuators Stainless steel Rod levis (includes nut and pin) L H LH Ø B T H Bore P/N B H L LH T 9/6" (056) R # /4" (075) R / /6" (06) R / /2" (50) R / " (200) R / Stainless steel Foot Bracket B B Ø F Bore P/N B B F 9/6" 056 RPFB /4" 075 RPFB /6" 06 RPFB /2" 50 RPFB " 200 RPFB N/US

5 Roundline Plus Stainless Steel ctuators imensions in inches Stainless steel Pivot Bracket (includes pin) M B Ø B B F Ø Bore P/N B B B F M 9/6" (056) PB /4" (075) PB /6" (06) PB /2" (50) PB " (200) PB Stainless steel Mounting Nut T N Bore P/N N T Maximum torque (in-lbs.) 9/6" (056) SS / /4" (075) SS / /6" (06) SS / /2" (50) SS " (200) SS.88 -/ N/US

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

* Screw clearance to allow bolt head to pass through - no counter bores

* Screw clearance to allow bolt head to pass through - no counter bores Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16 or 3/8 Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

RT Series Roundline Plus Thrusters

RT Series Roundline Plus Thrusters 9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series SS Solid Stainless Cylinders

Series SS Solid Stainless Cylinders Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE

Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for

More information

Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non-Repairable Original Line Steel Repairable (Bell

More information

Original Line Cylinders

Original Line Cylinders How to Order Introduction to Bimba Standard Air.3.4-.9.0-.65 Three-Position.66-.67 Air with Adjustable Cushions.68-.75 MRS.76-.86 Non-Rotating Air.87-.97 PC.98-.03 All Stainless Steel Repairable (Bell

More information

Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders

Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................

More information

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51 Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58

More information

CYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS

CYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free

More information

Compact Select Cylinders Inch Series.

Compact Select Cylinders Inch Series. Compact Select Cylinders Inch Series Table of Contents: Inch Series Inch Series, Options and ccessories Inch Series How to Order: Inch Series... pg. Forces, Pressure Ratings, Envelope Dimensions... pg.

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

ACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /

ACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / / Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification

More information

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in. Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.

More information

NFPA Aluminum & Steel Cylinders

NFPA Aluminum & Steel Cylinders Section 11 NFP luminum & Steel ylinders Page T-11-18 ylinder with 01 (MS4) Side Tapped Page T-11-22 ylinder with 03 (MF1) Head ectangular Flange Page T-11-24 ylinder with 03 (M3) Head Square Flange Series

More information

Bimba Original Line - Stainless Steel Body Air Cylinders

Bimba Original Line - Stainless Steel Body Air Cylinders Bimba Original Line - Stainless Steel Body Air Cylinders How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and

More information

Catalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders

Catalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders Catalog PN- Prices effective September 1, 011 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders 5-8-10 Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

Bellows-Sealed Valves

Bellows-Sealed Valves www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and

More information

Options Many options can be added to our standard cylinders. Options vary by bore size. See individual bore sizes for valid options, pricing and lengt

Options Many options can be added to our standard cylinders. Options vary by bore size. See individual bore sizes for valid options, pricing and lengt The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and mounting styles and options. TYPE BXX Block or Trunnion

More information

ISO Standard Hydraulic Cylinder

ISO Standard Hydraulic Cylinder ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series

More information

LESA Series TT Linear Electrohydraulic Servo Actuators

LESA Series TT Linear Electrohydraulic Servo Actuators Vickers ylinders LS Series TT Linear lectrohydraulic Servo ctuators Designed specifically for wood products processing applications 5094.00/N/0797/ Introduction LS Series TT Linear lectrohydraulic Servo

More information

Original Line Cylinders

Original Line Cylinders How to Order Introduction to Bimba 1.3 1.4-1.9 Standard Air 1.10-1.66 Three-Position 1.67-1.68 Air with Adjustable Cushions 1.69-1.76 MRS 1.77-1.87 Non-Rotating Air 1.88-1.98 PC 1.99-1.104 Steel Non-Repairable

More information

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic

More information

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE) Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with

More information

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P. Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials

More information

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of

More information

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

Morin Figure HP Actuator

Morin Figure HP Actuator 1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates

More information

Weir-Style Diaphragm Valves

Weir-Style Diaphragm Valves www.swagelok.com Weir-Style Diaphragm s DW Series Standard valve sizes 1/2 to 4 in. and minivalve sizes 1/4, 3/8, and Manual and pneumatic actuation Kwik-Clamp, TS series sanitary clamp, and tube butt

More information

Screwed-head cylinders

Screwed-head cylinders Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,

More information

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure. series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500

More information

CM2X-Z 10 - C D M 2 X L Z - M9BW. Port thread type. Nil TN TF. Rc NPT. Rubber bumper only. Cylinder stroke (mm) Action

CM2X-Z 10 - C D M 2 X L Z - M9BW. Port thread type. Nil TN TF. Rc NPT. Rubber bumper only. Cylinder stroke (mm) Action Series 10-11- CM2X-Z ø, ø, ø, ø Low Speed Cylinder ouble Acting, Single Rod How to Order Clean series 10 11 Vacuum suction type irectional Control Valves Vacuum suction type Low speed cylinder B L F G

More information

Flat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders

More information

PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio

PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with

More information

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16 to 2. ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

Provenair Series AN Cylinders Parts List / Service Instructions

Provenair Series AN Cylinders Parts List / Service Instructions Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square

More information

VERTICAL THRUSTER PNEUMATIC SLIDE

VERTICAL THRUSTER PNEUMATIC SLIDE ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION

AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders

More information

Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated for long life. Special ra

Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated for long life. Special ra 5.3-5.4 Slide 5.5-5.12 Rodless 5.13-5.23 5.24-5.32 pplication hecklist 5.33 Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated

More information

Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in.

Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. Keystone Pneumatic Pneumatic ctuator ctuator Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. Features and enefits Compact rack and pinion design utilizes

More information

P1E Series ISO Cylinders

P1E Series ISO Cylinders High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane

More information

3/2-Way Valve DN 15 up to DN 40

3/2-Way Valve DN 15 up to DN 40 3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment

More information

Richter Twin Piston Quarter-turn Actuators

Richter Twin Piston Quarter-turn Actuators Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter

More information

Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston

Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

Right Angle Control Valve 7051

Right Angle Control Valve 7051 Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.

More information

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT. ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.

More information

We shut the air supply down to our clamps once they are in position. Sometimes we notice that they are sticking. Could this be the cause?

We shut the air supply down to our clamps once they are in position. Sometimes we notice that they are sticking. Could this be the cause? Frequently Asked Questions B-1 Following are some of the questions we have been asked while developing the VektorAir TM line. Please read them carefully before planning your system. Many common problems

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

More information

2 way basic mounting: Through-hole or both ends tapped

2 way basic mounting: Through-hole or both ends tapped Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type

Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.

More information

Be llows-se aled Valve s

Be llows-se aled Valve s www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,

More information

210C-1 21 MPa double-acting type hydraulic cylinder

210C-1 21 MPa double-acting type hydraulic cylinder 17 2-1 21 MPa double-acting type hydraulic cylinder ompact design hydraulic cylinder at 21MPa. 21 MPa double-acting hydraulic cylinder with bores from 4 mm to 2 mm. Inovation of design scrutinized carefully

More information

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / / Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

3/2-Way Valve DN 15 up to DN 50

3/2-Way Valve DN 15 up to DN 50 /-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated

More information

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard

More information

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type Series -J2 ø0, ø6 magnet for switch, auto switch cannot be mounted. E M asic ouble-side bossed ouble clevis Single foot ouble foot ore size 0 0 mm 6 6 mm J2 6 60 Z M9W bracket is shipped together with

More information

Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION

Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including

More information

Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table

Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston

More information

Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A

Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.

More information

KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS

KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS

More information

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion

More information

SERIES PA SWING ARM CLAMPS for the Automotive Industry

SERIES PA SWING ARM CLAMPS for the Automotive Industry Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:

More information

Pneumatic rotary drive

Pneumatic rotary drive Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can

More information

Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT

Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem

More information

Parallel Grippers- Miniature Series

Parallel Grippers- Miniature Series RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design

More information

Type 1031 Piston Rotary Actuators for POSI-SEAL Valves

Type 1031 Piston Rotary Actuators for POSI-SEAL Valves pril 1995 ulletin.1:1031 ype 1031 Piston Rotary ctuators for POS-SL Valves ype 1031 piston rotary actuators (see figure 1) are rugged, versatile units which provide a reliable method of opening and closing

More information

1.46 L INEAR A CTUATOR: AIR C YLINDER SERIES NCM A IR C YLINDER S ERIES NCM S TAINLESS S TEEL C YLINDERS H OW T O

1.46 L INEAR A CTUATOR: AIR C YLINDER SERIES NCM A IR C YLINDER S ERIES NCM S TAINLESS S TEEL C YLINDERS H OW T O 1.46 L INEAR A CTUATOR: AIR C YLINDER A IR C YLINDER S TAINLESS S TEEL C YLINDERS Double Acting Single Acting / Spring Return / Extended NonRotate Option Available Double Rod Magnetic Piston for Auto Switch

More information

The friction free alternative

The friction free alternative Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

ISO 6431/6432 Cylinders

ISO 6431/6432 Cylinders ISO 6431/6432 ylinders ISO 6431, VDM 24562 ir ylinders 11.2-11.6 ISO 6431 ccessories 11.7-11.9 ISO 6432/ETOP ylinders 11.10-11.22 ISO 6432 ccessories 11.23 PE ir ylinders 11.24-11.26 PE ccessories 11.27

More information

VAL /4" to 2" Solenoid Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves. Solenoid pilot operated spring return inline valves with nonlocking

VAL /4 to 2 Solenoid Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves. Solenoid pilot operated spring return inline valves with nonlocking 1/4" to 2" Solenoid Pilot ctuated VLVES High flow - Cv of 1.2 to 49.5 Durable, robust construction 1/4" to 2" ports (SPP, PTF, or ISO Rc threads) Wide range of voltages available Four functional types:

More information