RW Series eatures and Benefits
|
|
- Dennis Norris
- 5 years ago
- Views:
Transcription
1
2 RW Series eatures and Benefits ow To Order Replacement omponents imensions Technical Specifications Numatics 2003 Rev. 11/03 2
3 RW Series RW-Series Rotary Actuator: esigned to handle real world rotary actuator applications. The RW-Series Rotary Actuator design utilizes two independent piston cylinders. ach piston has a crank arm attached to a crankshaft. As the piston strokes in its bore, the crankshaft rotates. Pressurizing the opposite bore reverses rotation. This unique design has many features and benefits over conventional rotary actuators. A. Body: ardcoat Anodized Aluminum...Lightweight, durable, igh strength to weight ratio, Teflon impregnated inside and out Multiple mounting surfaces...lexible, easy access mounting B. Output Shaft: ardened electroless nickel...orrosion and wear resistance Oversized diameter...increased strength and rigidity, Supported by both roller and thrust bearings ollow shaft...reduced weight, thru shaft access. Stroke Adjustment:.W. and..w. Adjustment...Infinite adjustment in both directions of rotation, asy access, secured by jam nut. Sensor Mounting hannel: Machined into body...accepts Numatics Motion ontrol dovetail switches (world switch), asy access, easy adjustment Magnetic piston is standard on all models. Permanently lubricated seals are standard on all models, no lube required. Viton compound for high temperature applications, optional. actory lubricated, fluorinated grease. (Non-toxic, non-migrating and no chlorine, silicones or chlorofluorocarbons (s).) leanroom applied. Additional options: Shock absorbers ouble output shaft B A 3
4 ow to Order Bore Sizes 030 = 30 in.-lb. 075 = 75 in.-lb. 125 = 125 in.-lb. Rotation A = 90 Seal Option 1 = Standard 2 = Viton Shaft Option A = Standard Single Shaft nd B* = Single Shaft Tapped NPT Port * = Single Shaft Tapped Port X* = ouble Shaft Tapped Port Y* = ouble Shaft Tapped NPT Port Z = Additional ouble Shaft nd *Tapped both ends. xample order: Part Number: RW030A1AZ1* Part escription: RW rotary with 30 inlb torque, 90 rotation, standard seals, standard single output shaft, all PNP quick disconnect sensing, two positions, with shocks. *When entering an order, O NOT use spaces or dashes. ollow example above. Replacement omponents and Kits Shock Retro it Kits* MOL NO. RW030 RW075 RW030SK RW075SK RW125 RW125SK *Kits include hardware and shocks. Replacement Shocks MOL NO. RW030 RW075 RW125 RW Rotary Seal Kit with Shock Option SK030 SK106 SK150 SRIS BUNA SALS VITON SALS RW030 RWSKB-030SK RWSKV-030SK RW075 RWSKB-075SK RWSKV-075SK RW125 RWSKB-125SK RWSKV-125SK RW Series RW 030 A 1 A Z 1 Sensing Kits STANAR OR ST SWIT all ffect PNP (Sourcing) all ffect NPN (Sinking) Reed Switch QUIK ISONNT OR ST all ffect PNP (Sourcing) all ffect NPN (Sinking) Reed Switch *All mounting hardware included with sensors. RW Rotary Seal Kit PNPS31 NPNS32 RSS02 PNPQ31 NPNQ32 RSQ meter cable PX90 Straight 5 meter cable Shock Options 1 = Shocks Yes 2 = Shocks No Sensing Position A = Single Position W B = Single Position W = Two Position = No Sensing Sensing Type Standard ord Set 1 = all ffect - PNP (sourcing) 2 = all ffect - NPN (sinking) 3 = Reed Switch 6 = No Sensing Quick isconnect ord Set Z = all ffect - PNP (sourcing) Y = all ffect - NPN (sinking) X = Reed Switch See Sensor section. PXST SRIS BUNA SALS VITON SALS RW030 RWSKB-030 RWSKV-030 RW075 RWSKB-075 RWSKV-075 RW125 RWSKB-125 RWSKV-125 4
5 RW Series imensions Q MOUNTIN OLS (BOT SIS) SNSOR MOUNTIN ANNL BOT SIS S R T B MAX. V PORT K1 (K3 PORT OPTION) L AA U W X BB N AP IS RVRSIBL OR PORT ASS TOP OR BOTTOM A Z L J RW Series M P N K2 (K4 PORT OPTION) OWL 45 LOATION OWL LOATION 45 TO L KYWAY LOATION SOWN AT MI-ROTATION.30 SNSIN OPTION TYP. ALL RW030 RW075 RW125 A B / / / X 0.070/0.074 P X 0.106/0.110 P X 0.141/0.145 P J K1 # TAPP 1/4-20 TAPP 3/8-16 TAPP K TRU.339 IA. X 1.75 P 7/16 IA X 2.45 P K3 NO OPTION OPTIONAL 1/8 NPT OR 1/8 -PORT OPTIONAL 1/4 NPT OR 1/4 -PORT K4 OPTIONAL # TAPP OPTIONAL 1/8 NPT OR 1/8 -PORT OPTIONAL 1/4 NPT OR 1/4 -PORT L M N P Q # /4-20 1/4-20 R S 3/8-24 7/ /16-14 T U V # /8 NPT 1/8 NPT W X Y Z 3.209/ / /5.376 AA # /4-20 5/16-18 BB 0.124/ / / / / / / / / All tapped holes are 1.5 x dia. minimum. Y 5
6 RW Series B MAX. A RW Series YNAMI YNAMI ISPLAMNT TORQU TRUST RAIAL PR UNIT MAXIMUM 100PSI LOA LOA R WIT PRSSUR RW inlb (3.4 N-m) 646 lbf (2875 N) 197 lbf (877 N) cuin. (0.115 cc) psi RW inlb (9.2 N-m) 1034 lbf (4600 N) 357 lbf (1589 N) cuin. (0.335 cc) psi RW inlb (15.0 N-m) 1330 lbf (5917 N) 518 lbf (2307 N) cuin. (0.538 cc) psi Typical breakaway 5.0 psi. Backlash max. ± 1/4 degree. Shock Option ual Output Shaft ustom Options ripper adapter plates quoted per application orrosive resistant units Adapter plates to S & S series slides onsult factory for more information Shock Option RW030 RW075 RW125 A B SK030 SK106 SK # /8 NPT 1/8 NPT RW030 RW075 RW / / / X 0.070/0.074 P X 0.106/0.110 P X 0.141/0.145 P
Table of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationOEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4
OEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4 OEM 2-1/2 (OT) Series... pg. How to Order: OEM 2-1/2
More informationTable of Contents. SH Series Linear Slides
Table of Contents SH Series...3-17 Features and Benefits... 3 How To Order... 4 Dimensions...5-7 Specifications and Load Ratings....8-10 Mounting Options... 11 NuMate Mounting System.... 12 Multi-Position
More informationOEM Series Rotary Actuators
OEM Series Rotary Actuators OEM Series Rotary Actuators: Table of Contents OEM 1-1/4 (OC) Series...pg. 2 How to Order: OEM 1-1/4 (OC) Series...pg. 3 imensional ata...pg. 4 OEM 2-1/2 (OT) Series...pg. How
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationTable of Contents PBS Series Features and Benefits
Table of Contents PBS Series........................................... 3-6 Features and Benefits..................................................................................3 How To Order........................................................................................4
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationTable of Contents Tiny Titan Series Features and Benefits How to Order Optional Features
Table of Contents Tiny Titan Series. 3-22 Features and Benefits.................. 3 How to Order......................... 4 Optional Features..................... 5 Basic and Front Flange Mounts..........
More informationOEM Series Rotary Actuators. Air-Oil Systems, Inc.
OEM Series Rotary Actuators OEM Series Rotary Actuators: Table of Contents OEM 1-1/4 (OC) Series...pg. 2 How to Order: OEM 1-1/4 (OC) Series...pg. 3 Dimensional Data...pg. 4 OEM 2-1/2 (OT) Series...pg.
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationMxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail.
www.tolomatic.com Mxp band cylinder N Internal Bearing S solid bearing P profiled rail Contents N Internal Bearing eatures..... MXP_2 S Solid Bearing eatures........ MXP_4 P Profiled Rail eatures.........
More informationVERSATILE THRUSTER PNEUMATIC SLIDE
S, SE VERSATILE THRUSTER PNEUMATI SLIE Major enefits Offered in short or long body an be ordered with standard or oversize shafts Standard dowel pin holes for ease of mounting Several switch options 5
More informationFour Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
More informationDURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES
CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the
More informationOptions selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationMXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT.
www.tolomatic.com MXP BAND CYLINDER N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL CONTENTS N Internal Bearing Features... MXP_2 S Solid Bearing Features... MXP_4 P Profiled Rail Features... MXP_6
More informationSTROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYDRAULIC CYLINDER LIGHTWEIGHT ALUMINUM BODY
ISO 9001 REGISTERE WP4 & 6 SERIES GOL LINE STROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYRAULIC CYLINER SHOT PINS WP4 40mm SQUARE RAM SOLI STATE CYLINER SWITCH AVAILALE WITH WP4 70mm
More informationPBS Series Power Block Slide
PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationTwo Shaft Linear Thrusters
Two Shaft Linear Thrusters TWO SHAFT THRUSTERS Seven Models with bores from 9/16 to 4 Compact, light weight robust design Smooth linear motion CYLINDER Several manufacturers to choose from Pneumatic or
More informationAG Series Angular Grippers
AG Series Angular Grippers www.numatics.com Table of Contents AG Series Angular Grippers Features and Benefits 3 How to Order 4 Dimensions 5 Specifications and Load Ratings 6 Sensing Part Numbers 7 Quick
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationRound Head and Square Head Tie Rod Cylinders
S5-7-R 5-7 Round Head and Square Head Tie Rod ylinders Features & Benefits.... General, Standard Ratings.... onstruction Information.... How a Longstroke is built odel Number hart.... How to Order Option
More information8290 Series. Angle Body Piston Valves. Introducing the all NEW 8290 Assembly Configurator
4 82 Series Angle ody Piston Valves Introducing the all NW 82 Assembly onfigurator road range of pressure operated valves for air, water, steam, and light slurries ronze & stainless steel constructions
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationMXE SCREW DRIVE ACTUATORS
MXE SCREW RIVE ACTUATORS S SOLI BEARING P PROILE RAIL LINEAR SOLUTIONS MAE EASY THE MXE ELECTRIC ACTUATOR ESIGNE TO OUTLAST EVERY ROLESS ACTUATOR ON THE MARKET The MXE electric actuator is exactly what
More informationRotary Vane Actuators
Rotary Vane Actuators Rotary Vane Actuators Unitized Body Turn-Act s patented extrusion combines tube, stator and bolt lobes into a one-piece unitized body. Unique design provides torsional rigidity allowing
More information* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationLINEAR MOTION AND ALIGNMENT
LINAR MOTION AN ALIGNMNT Section Introduction to Linear Shift Mechanisms 094 Linear Shift Mechanism Actuation Options 096 Standard Linear Shift Mechanism (LSM ) 098 Long Travel Linear Shift Mechanism (LSML
More informationFP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
More informationTable of Contents FE Series Features and Benefits
Table of Contents FE Series.................................................................................... -6 Features and Benefits..................................................................................
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationHeavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
More informationNEW. ABEC 3 Double-Shielded Corrosion-Resistant Lightweight. Overall Length Overall. Length
NW Pillow lock-mounte all earings Miniature ouble-shiele orrosion-resistant ightweight Ø W Ø eatures: ubricate for the life of the bearing Meical, scientific & pharmaceutical applications Operating Temperature:
More informationCAP0538R1 Ball Slides-BP.qxp:OEM_TA 8/1/16 9:14 AM Page ii Ball Slides
Ball Slides Ball Slide ylinders: Table of ontents Ball Slide ylinders: Forces/Pressure Ratings... pg. 2 How to Order... pg. 3 omponent Description... pg. 4 Dimensions BS1000 Series... pg. 5-10 Technical
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More informationRT Series Roundline Plus Thrusters
9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke
More informationTable of Contents. R Series
Table of Contents R Series...-8 Features and Benefits... How to Order.... Standard Specifications.... 5 Options... 6 Cushions... 6 Bumpers... 6 Shock bsorbers... 6 Mounting Options... 7 Shaft Seal Cover
More informationTiny Tim. Series T, VT, ET, and NFPA Air Actuators. Section 10
Section 0 Tiny Tim Series T, VT, T, and NFP ir ctuators Series T & VT Features.............................CT-0- Series T Features................................CT-0- Series T & VT Specifications........................CT-0-
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of
More informationCylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
More informationAdams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationSeries SS Solid Stainless Cylinders
Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O
More informationTurn-Dex (CD) 1-1/4 Series
rotarybp-qx4-ta 4/1/05 11:7 AM Page 2 Turn-Dex (CD) 1-1/4 Series ROTARY VANE ACTUATORS with integral unidirectional clutch: 6 base models with torque outputs from 1 in.lbs. to 60 in.lbs. Clockwise or Counterclockwise
More informationFeatures and enefits
..............................................3-13 Features and enefits..............................................................................3 How To Order....................................................................................4
More informationPERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES
The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The
More informationNFPA Aluminum & Steel Cylinders
Section 11 NFP luminum & Steel ylinders Page T-11-18 ylinder with 01 (MS4) Side Tapped Page T-11-22 ylinder with 03 (MF1) Head ectangular Flange Page T-11-24 ylinder with 03 (M3) Head Square Flange Series
More informationTable of Contents BDU Series Features and Benefits
Table of Contents BDU Series.............................................. 3-13 Features and Benefits..................................................................................3 How to Order.........................................................................................4
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationRC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
More informationESCAPEMENT DEVICES DURA-SCAPE BC SERIES STANDARD LINE 2-1.1
DURASCAPE BC SERIES STANDARD LINE Full range of sizes and strokes Hard Stops Robust design Few moving parts Extremely Durable Fully field serviceable Sensors Available See Page 21.2 FOR ORE INFORATION
More informationLP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51
Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58
More informationMxp band cylinder. N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY
Mxp band cylinder N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY Pneumatic Actuators Electric Actuators Drives & Motors Largest selection of rodless cylinders in band, cable, and
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationDURA-SLIDE MM-SERIES JJ-SERIES. Air Shuttles. MM-Series - 2 Position Shuttle. JJ-Series - 3 Position Shuttle 2 POSITION SHUTTLING DEVICE
DUR-SLIDE ir Shuttles MM-SERIES 2 POSITION SHUTTLING DEVIE JJ-SERIES 3 POSITION SHUTTLING DEVIE DUR-SLIDE MM and JJ Series of ir Shuttles are another R&I development made to answer the automation industry
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More informationRotary Actuator/Vane Style
Rotary Actuator/Vane Style Series :,,,, Basic style Series With angle adjuster Series BWU Fluid Air, CR Vane type Port location Single vane (S) ouble vane () Side ported (Nil) Axial ported (E) S Side ported
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationAmerican Cylinder Co., Inc. Catalog LSC 1108-E
0 011 American Cylinder Co., Inc. Catalog LSC 1108-E TABLE OF CONTENTS Table of Contents... age 1 How to Order... age 1 hysical ata... age 1 Standard Features and Benefits... age Engineering ata... age
More informationTurn-Dex Rotary Vane Actuators
Turn-Dex Rotary Vane Actuators Turn-Dex: Table of Contents Turn-Dex Turn-Dex 1-1/4 Bore pg. 2 How to Order pg. Dimensional Data pg. 4 Turn-Dex 2-1/2 Bore pg. 5 How to Order pg. 6 Dimensional Data pg. 7
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationCompact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
More informationVictory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
More informationSeries ZX. Cylinders > rodless cylinders > Technical details. Versions. Order code ZX- ** - ** - **** - **
Cylinders > rodless cylinders > Technical details Operating pressure Temperature range Medium 1... 8 bar -10 C... +70 C Filtered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4,
More informationStainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic
atalog 0923/NA (10/01) Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended
More informationDURA-SLIDE AIR-SERIES. Air-Powered Slides AIR-10 AIR-20 AIR-30 AIR-40
AIRSERIES AIR Series of Pneumatic Linear Positioning Devices provide a practical, lowcost approach to automatic work positioning. The builtin air cylinder simplifies slide operation and eliminates the
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationEZ Series Linear Slides
EZ Series Linear Slides Optional owel ole/slot ode Optional slip fi t dowel holes and slip fit dowel slots allow for repeatably precise slide mounting and/or attachment of end tooling. Option may be specifi
More informationSeries M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( )
asic iring Solid state 3 wire NPN (hen power source for and load is not common.) Sink input specifications 3-wire NPN Switch 3-wire N connection for NPN output (using relays) Series M uto Switch onnections
More informationCABLE-DRIVEN PNEUMATIC ROTARY ACTUATOR
R LE-RIVEN PNEUTI ROTRY TUTOR ajor enefits Exceptionally low profile for confined spaces Three bore sizes and two standard rotations, 90 and 180 Standard internal shock pad eliminates metal to metal contact,
More informationCV19 SERIES SAFETY RELIEF VALVE
CV19 SRIS SATY RLI VALV eatures: Bronze Construction ASM and CRN Certifications (C Opt) Teflon PA lourocarbon Seat Optional Anti-Vibration ampened Lever Maximum Temperature 0 o Set Pressure Ranges - 300PSI
More informationMEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI
AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed
More informationMxe SCREW DRIVE ACTUATORS
Mxe SCREW RIVE ACTUATORS S solid bearing P profiled rail MAXIMUM URABILITY The MXE ELECTRIC ACTUATOR designed to outlast every rodless ACTUATOR on the market The MXE electric actuator is exactly what you
More informationGROUND BLOCK RETRACT CYLINDERS
ISO 9001 REGISTERED GROUND BLOCK RETRACT CYLINDERS FOR ALL MIG & ARC WELDING APPLICATIONS IN FIXTURES, TRUNIONS, AND DIAL TABLES. INSULATED GROUND BLOCK CYLINDERS ARE IDEAL FOR SINGLE-POINT WELDING. SOLID
More informationDIST. AUTORIZADO. Design Features
IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationGeneral Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationC-Series Cylinders: Table of Contents
C-Series Cylinders: Table of Contents C-Series C-Series Slide Features... pg. 2 CD and CE Series... pg. 3 Quick Reference... pg. 3 How to Order: C Series... pg. 4 Options: C Series... pg. Dimensional Data
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationPneu-Turn Rotary Actuators
Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE
More informationMxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail.
Mxp band cylinder N Internal Bearing S solid bearing P profiled rail Contents Introduction..................... MXP_4 Comparison..................... MXP_5 N Internal Bearing Features...... MXP_6 S Solid
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More information