OEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4
|
|
- Job Poole
- 6 years ago
- Views:
Transcription
1
2 OEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4 OEM 2-1/2 (OT) Series... pg. How to Order: OEM 2-1/2 (OT) Series... pg. 6 imensional ata... pg. 7 OEM Options Flange Mount... pg. 8 Combination Flange... pg. 9 Side Angle Mounts... pg. 10 Extended Tie Rods... pg. 11 Adjustable Stroke Control (ASC)... pg. 12 Urethane Bumpers... pg. 13 Cap Switch Systems... pg. 14 Trantorque...pgs OEM (OC) SERIES ACTUATOR PG. 2 URETHANE BUMPERS PG. 13 OEM OPTIONS: ASC PG. 12 OEM (OT) ACTUATOR WITH INTEGRAL ROHEA FLANGE OPTION, PORT ON SHORT SIE PG. 9 OEM (OC) SERIES ACTUATOR PG. 1
3 OEM 1-1/4 (OC) Series ROTARY VANE ACTUATORS: 1 base models with torque outputs from 9 in. lbs. to 100 in. lbs. Rotations 90, 180 & 270 degrees. As compared to other rotary devices Vane actuators have: One moving part providing: ZERO backlash. No loss of motion. Smooth rotation. Precise repeatability. Continuous full torque throughout rotation. Compact Patented Urethane seals for: Long cycle life and Non-lube service. Actual applications with 2 million cycles and more. 100s of standard options and modifications. Just imagine How Turn-Act Answer Engineering can work for you! Actuator Model Actuator Model Torque Chart (IN. LBS.) 180 and 270 Rotations 2 Actuator Torque at 100 PSI 80 PSI 60 PSI Torque Chart (IN. LBS.) 90 Rotations Actuator Torque at 100 PSI 80 PSI 60 PSI SPECIFICATIONS Unit Materials Stator/Rotor Seals...Urethane Shaft/Tube Seals...Buna 1 Shaft Stainless Steel Body...Anodized Alum. Bearings...elrin Shaft Load Capacities *Max. Side Load...0lbs. *Max. End Load...lbs. Miscellaneous Inlets...1/8 NPT Min. Pressure...40 psi Max. Pressure psi Cylinder Bore...1-1/4" Temperature Range -20 F to 180 F. Consult factory for higher temperature. Filtration Air microns OEM SERIES ACTUATOR MOEL NUMBER: 32-Q Cycle Rates 3 Max. non-lubed rate: ouble Vane...40cpm Single Vane...20cpm Max. lubed rate: Consult Factory Rotary Motion Backlash All models...0 degree Leak Rates Air...4 cfh or less@100psi 1 Viton Optional 2 All rotations are nominal +4/-0 actual 3 Cycle = Start position to end of rotation and returning to the start position. Stroke = 1/2 cycle Capacity per Stroke 3 (IN 3 ) Weights (OZs) Rotation 2 Rotation 2 Rotation 2 Rotation
4 How to Order: OEM 1-1/4 (OC) Bore Series MOEL EN CAPS SHAFT UNIT MATERIAL OPTIONS OPTIONS 11 1 Y 1 XXX XXX Model Model Series - Torque - Rotation 11 OC OC OC OC OC OC OC OC OC OC OC OC OC OC OC End Caps To Specify other modifications; Consult Factory Pneumatic Clear Anodize 3 4 Y M W V U T S R Q Shaft To Specify other modifications; Consult Factory Single End - No Keyway (ST) ouble End - No Keyway Each End Single End - Woodruff Key ouble End - Woodruff Key Each End Single End - Shaft Flat ouble End - Shaft Flat Each End Single End - Keyway ouble End - Keyway Each End Single End - Acces. Stub other End Unit Materials Shaft - Body - Trim Stainless Steel - Anodized Aluminum - Carbon Steel Stainless Steel - Anodized Aluminum - Stainless Steel Stainless Steel - Stainless Steel - Stainless Steel Stainless Steel Stainless Steel - Stainless Steel Options Additional options available on pg No Options 100 Flange Mount - Rod End 101 Flange Mount - Cap End 300 Extended Tie Rods - Rod End 301 Extended Tie Rods - Cap End 400 Adjustable Stroke Control - Cap End, Pos. 401 Adjustable Stroke Control - Rod End, Pos Side Mounts - Positions 2 & Side Mounts - Positions 4 & Side Mounts - Positions 2, 4, 6 & Thrust Protection - Cap End, Pos Thrust Protection - Rod End, Pos.1 B00 T01 T02 Urethane Bumpers 3/8" Trantorque Shaft Coupler - Carbon Steel 3/8" Trantorque Shaft Coupler - Stainless Steel Switch Options Additional switch options available on pg. 14 All Axx Switch Options are Single End Only A00 A02 A0 A08 Stainless Shaft Coupler has 1/3 the Transmissible Torque as T01 (see pg. 1) Switch Package - No Switches Switch Pkg. - 2 Reed Switches Switch Pkg. - 2 Sourcing Switches Switch Pkg. - 2 Sinking Switches ouble end switch options available on pgs. 14 3
5 imensional ata: OEM 1-1/4 (OC) Series Basic imensions.7.02 Shaft Options Air Inlet A B C 1.00 Basic Shaft.7 Shaft Flat 43º Ø.37 90º 180º 270º.33 START OF ROTATION Ø.37 8 Rod End View 1.22 SQ..20 RAIUS 7 1/8 NPT PORTS #10-24 UNC THREA.31 EEP 4 PLACES 1.63 SQ. 1/4-20 UNC THREA.37 EEP 4 PLACES imensional Specifications Actuator A B C 1X X X X X /32 Square Keyway.44 #303 Woodruff Key RAIAL (SIE) LOA 0 lbs..812 THRUST (EN) LOA lbs. Nominal Rotations (+4/-0 actual) NOTE: The 43º start position is nominal. Tolerances are +/- 2 degrees. Port & Mounting Position References Shaft Load Capacity 4
6 OEM 2-1/2 (OT) Series ROTARY VANE ACTUATORS: 16 base models with torque outputs from 87 in. lbs. to 1000 in. lbs. Rotations 4, 90, 180 & 270 degrees. As compared to other rotary devices vane actuators have: One moving part providing: ZERO backlash. No loss of motion. Smooth rotation. Precise repeatability. Continuous full torque throughout the rotation. Patented Urethane seals for: Long cycle life and Non-lube service. Actual applications with 2 million cycles and more. 100s of standard options and modifications. Just imagine How Turn-Act Answer Engineering can work for you! Actuator Model Actuator Model Torque Chart (IN. LBS.) 180 and 270 Rotations 2 Actuator Torque at 100 PSI 80 PSI 60 PSI Torque Chart (IN. LBS.) 4 AN 90 Rotations Actuator Torque at 100 PSI 80 PSI 60 PSI SPECIFICATIONS Unit Materials Stator/Rotor Seals...Urethane Shaft/Tube Seals...Buna 1 Shaft Steel Body...Anodized Alum. Bearings...elrin Bushing Miscellaneous Inlets...1/4 NPT Min. Pressure...3psi Max. Pressure psi 4 Cylinder Bore...2-1/2" Shaft Load Capacities Max. Side Load lbs. Max. End Load...10 lbs. Temperature Range -20 F to 180 F. Consult factory for higher temperature. Filtration Air microns Hydraulic microns Capacity per Stroke 3 (IN 3 ) OEM SERIES ACTUATOR MOEL NUMBER: 612-Q1-000 Cycle Rates 3 Max. non-lubed rate: ouble Vane...40cpm Single Vane...20cpm Max. lubed rate: Consult Factory Rotary Motion Backlash All models...0 degree Leak Rates Air...4 cfh or less@100psi 1 Viton Optional 2 All rotations are nominal +4/-0 actual 3 Cycle = Start position to end of rotation and returning to the start position. Stroke = 1/2 cycle Weights (LBS.) Rotation 2 Rotation 2 Rotation 2 Rotation
7 How to Order: OEM 2-1/2 (OT) Bore Series MOEL EN CAPS SHAFT UNIT MATERIAL OPTIONS OPTIONS 613 S 1 XXX XXX Model Model Series - Torque - Rotation 611 OT OT OT OT OT OT OT OT OT OT OT OT * OT * OT * OT * OT * These models require '2' or '' for the selection in block #4 Unit Materials. End Caps To Specify other modifications; Consult Factory Pneumatic Clear Anodize 3 4 Shaft To Specify other modifications; Consult Factory Y M W V U T S R Q Single End - No Keyway ouble End - No Keyway Each End Single End - Woodruff Key ouble End - Woodruff Key Each End Single End - Shaft Flat ouble End - Shaft Flat Each End Single End - Keyway ouble End - Keyway Each End Single End - Acces. Stub other End Unit Materials Shaft - Body - Trim Carbon Steel - Anodized Aluminum - Carbon Steel 2 Hardened Carbon Steel - Anodized Aluminum - Carbon Steel Stainless Steel - Anodized Aluminum - Stainless Steel Stainless Steel Stainless Steel - Stainless Steel Hardened 440 SS - Anodized Aluminum - Stainless Steel Stainless Steel Stainless Steel - Stainless Steel Options Additional options available on pg No Options 100 Flange Mount - Rod End 101 Flange Mount - Cap End 200 Side Angle Mounting Brackets - Mounting Surface 3 & Extended Tie Rods - Rod End 301 Extended Tie Rods - Cap End 320 Extended Tie Rods - Both Ends 400 Adjustable Stroke Control - Cap End, Pos. 401 Adjustable Stroke Control - Rod End, Pos.1 00 Electrical Position Indicator - Cap End, Pos. 704 Teflon Impregnated Hard Anodized 801 Side Mounts - Positions 2 & Side Mounts - Positions 4 & Side Mounts - Positions 2, 4, 6 & Thrust Protection - Cap End, Pos Thrust Protection - Rod End, Pos.1 B00 T01 T02 Urethane Bumpers 3/4" Trantorque Shaft Coupler - Carbon Steel 3/4" Trantorque Shaft Coupler - Stainless Steel Switch Systems Additional switch options available on pg. 14 All Axx Switch Options are Single End Only A00 A02 A0 A08 Stainless Shaft Coupler has 1/3 the Transmissible Torque as T01 (see pg. 1) Switch System -No Switches Switch System -2 Reed Switches Switch System -2 Sourcing Switches Switch System -2 Sinking Switches ouble end switch options available on pgs. 14 6
8 imensional ata: OEM 2-1/2 (OT) Basic imensions #60 Woodruff Key Shaft Options Air Inlet 1.00 A C Basic Shaft Shaft Flat NOTE: Center drill omitted from shaft details for clarity. 43º Ø START OF ROTATION 1.7 Ø.70 /16-18 UNC THREA.37 EEP 4 PLACES /4 NPT PORTS 2.44 SQ SQ /16-18 UNC THREA 3/4 EEP 4 PLACES Ø.70 3/16" Square Keyway Ø.70 #60 Woodruff Key imensional Specifications Actuator A C 61X X X X º 90º 180º 270º RAIAL (SIE) LOA 100 lbs. Rod End View THRUST (EN) LOA 10 lbs. Nominal Rotations (+4/-0 actual) Port & Mounting Position References Shaft Load Capacity 7 NOTE: The 43º start position is nominal. Tolerances are +/- 2 degrees.
9 OEM Options Flange Mount OEM 1-1/4 Bore (OC) Series Ø.28 THRU 4 PLACES NOTE: Side Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page 3. OEM 2-1/2 Bore (OT) Series Ø.34 THRU 4 PLACES NOTE: Side Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page NOTE: The Flange Mount option and Adjustable Stroke Control option may not be ordered on the same end of a unit. Option# escription 100 Front Flange (Rod End) 101 Rear Flange (Cap End) 102 Front and Rear Flange Front Flange and Front ASC Combined (See page 8) 8
10 OEM Options- Combination Flange The flange option can be combined with either head, or the Adjustable Stroke Control housing of the actuator to minimize the overall length of the actuator. Combination Flange/Rod Head: Port shown on long side C C Combination Flange/Adjustable Stroke Control (ASC) Housing: The ASC housing and the flange are machined from a single piece of aluminum. Option # A B A B EEø THRU 4 PLCS escription AA BB Combo Flanges OEM 1-1/4 OEM 2-1/2 (OC) Series 10 Flange Mount integral with the Adjustable Stroke Control Housing Front Mount. 108 Flange Mount integral with the Adjustable Stroke Control Housing Rear Mount. OEM (OT) ACTUATOR WITH INTEGRAL ROHEA FLANGE OPTION, PORT ON SHORT SIE (OT) Series A B C EEø ASC Flange (AA) Flange Head (BB) Flange Mount integral with the Rod Head. Flange positioned with the port on the Long side. 111 Flange Mount integral with the Cap Head. Flange positioned with the port on the Long side. 120 Flange Mount integral with the Rod Head. Flange positioned with the port on the Short side. 121 Flange Mount integral with the Cap Head. Flange positioned with the port on the Short side. 9
11 OEM Options- Side Angle Mounts Option # MM LL A escription 200 Side Angle Brackets, Mounting Surface 3 & Side Angle Brackets, Mounting Surface 2 & Side Angle Brackets, Mounting Surface 4 & Side Angle Brackets, Mounting Surface 1 & NOTE: Specify the surface to be used for mounting. Example: Option 200 would call out surface 3 & 7 as the mounting surface, Option #201 would call out surface 2 & 6 as the mounting surface. OEM 2-1/2 Bore (OT) Series OEM OT Model Option 200 Shown in rawing NOTE: Side Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page 6. A LL MM TT 61X X X X TT 8 7 Mounting Surface Reference rawing Ø.344 THRU TYP 4 PLACES 10
12 OEM Options- Extended Tie Rods Option # escription 300 Extended Tie Rods, Front 301 Extended Tie Rods, Rear Extended Tie Rods, Front and Rear NOTE: 1. Tie rod material (Carbon Steel or Stainless Steel) is determined by the Unit Material selected for the base actuator. 2. The Extended Tie Rod option eliminates the standard front mounts. 3. Option 302 is not available on the OEM 1-1/4 (OC) Series. Consult Factory for other variations of this option. OEM 1-1/4 Bore (OC) Series.44 #10-24 UNC THREA 4 PLACES NOTE: Side Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page 4. OEM 2-1/2 Bore (OT) Series /16-18 UNC THREA 4 PLACES SQ SQ. NOTE: Side Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page 7. 11
13 OEM Options- Adjustable Stroke Control (ASC) The Adjustable Stroke Control (ASC) option allows an actuator to be adjusted to the exact rotational stroke desired. The ASC option consists of a shaft mounted steel cam, enclosed in a housing with control screws (see method of operation below). Turning the control screws either extends or limits the amount of rotation. The ends of the control screws impact the cam providing a positive and repeatable end of rotation stop. The ASC option is often specified for applications where the stroke required is not within the rotational tolerance. The standard rotational stroke tolerance of an actuator is +4º /-0º (i.e.: A 90-degree actuator without ASC will have a rotation of 90-94º With the addition of the ASC option a precise 90º rotation is attainable.). Option # escription 400 ASC Cap End, Position 401 ASC Rod End, Position ASC Cap End, Position ASC Rod End, Position ASC Cap End, Position 7 40 ASC Rod End, Position ASC Cap End, Position ASC Rod End, Position 4 NOTE: Contact Factory for other adjusting ranges. Adjustable Stroke Control (ASC) imension MOEL/Series (A =max) in. (B) in. (C) in. Sq. OEM 1-1/4 (OC) OEM 2-1/2 (OT) HOUSING CONTROL SCREW JAM NUT CAM Actuator Rotation * OT Series Only. Adjusting Range *4º 0-4 degrees 90º 0-90 degrees 180º degrees 270º degrees NOTE: Rotations greater than 180º are not fully adjustable with a standard 2 screw adjustable stroke control. Consult factory for greater adjustment range. 8 POSITION REFERENCE RAWING 7 4 NOTE: Specify the position to be tapped for adjustment screws. Example: Option 407 would call out position 4 as the adjustment screw location, as depicted in the drawing above. 6 3 A 1 2 METHO OF OPERATION NOTE: FLUSH AVAILABLE CONSULT FACTORY C B IMENSIONAL ATA 12
14 OEM Options- Urethane Bumpers Polyurethane BUMPERS absorb kinetic energy and reduces noise at the end of stroke. Actual rotation and repeatability achieved when bumpers are installed will be dependent on Load Air Pressure and Speed of Rotation. BUMPERS Series Option # OEM 1-1/4 (OC) OEM 1-1/2 (OT) B00 B00 NOTE: Only 1 end of rotation can be bumpered when the 4-degree rotor is ordered. OEM Options- Side Mounts Option # escription SIE MOUNTS, SIES 3 & 7 STANAR ON ALL MOELS (Except Opt. 810) 800 Side Mounts, Sides 1 & 801 Side Mounts, Sides 2 & Side Mounts, Sides 4 & Side Mounts, Sides 2, 4, 6 & Side Mounts, Sides 6 & Side Mounts, Sides 2 & No Side Mounts (removes Sides 3 & 7) NOTE: Specify the side to be used for mounting. Example: Option 804 would call out sides 2, 4, 6 & 8 as the mounting surfaces, as depicted in the drawings below. Mount sides 3 & 7 are standard on all models (OT, OC) but are not shown for clarity. OEM 1-1/4 Models NOTE: Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page 3. OEM 2-1/2 Models 1X X 1.0 3X X 2.0 6X X X X X Position Reference rawing.70 1/4-20 UNC THREA.44 EEP 4 PLACES PER SIE NOTE: Mounts surface 3 & 7 are standard, but are not shown for clarity. Standard Bottom Mount dimensions shown on page 7. NOTE: Center drill omitted from shaft details for clarity..26 /16-18 UNC THREA.7 EEP 4 PLACES PER SIE 13
15 OEM Options- Cap Switch Systems OEM Series Rotary Vane Actuators are available with electronic position sensing switches. The switches have LE lamps that light when in sensing position. If adjusted for end of stroke indication, the LE will remain lit as long as the stroke position is maintained. A small shaft mounted magnet in the switch housing operates the switches (See drawings). SWITCH SYSTEM WITH 8MM QUICK ISCONNECT OEM 1-1/4 BORE (OC) SERIES SWITCHES OEM 2-1/2 BORE (OT) SERIES SWITCHES SWITCH PACKAGE (CAP EN) Includes a Cap End Mounted Switch Ready Housing Lead Switching Switching Switching Max. Option # Switch Type Function Type Voltage Current Power Voltage rop A00 Switch Ready No Switches A0 PNP/Sourcing Normally 22 gauge 6-24 VC 0. Amp N/A 0. Volts Open Output A08 NPN/Sinking Normally 22 gauge 6-24 VC 0. Amp N/A 0. Volts Open Output SWITCH SYSTEM WITH 9 FT. LEAS A02 AC/C Reed SPST 22 gauge -120 VC/VAC 0. Amp Max 10 watts 3. Volts Normally Open 0/60 Hz 0.00 Amp min. Max A2 PNP/Sourcing Normally 8mm Type - B 6-24VC 0. Amp Max N/A 0. Volts Open Output Q A28 NPN/Sinking Normally 8mm Type - B 6-24VC 0. Amp Max N/A 0. Volts Open Output Q A22 AC/C Reed SPST 8mm Type - B -120 VC/VAC 0. Amp Max 10 watts 3. Volts Normally Open Q 0/60 Hz 0.00 Amp min. Max Caution: Switches will be permanently damaged if operated without a load. Consult factory if lead length will exceed 20 ft. Max Max 14
16 OEM Options- Trantorque Trantorque Trantorque keyless shaft couplings eliminates: The need for keys, keyways and setscrews. Simplifies synchronization. Allows for infinite radial adjustments. Mounts hubless devices. The Trantorque coupling uses 2 opposing tapers that expand into the O and contract on the I to attach and hold shaft loads. d A1 MINI SERIES B1 L1 L2 d A d A1 NON-TRAVERSING Actuator Max. Transmissible Shaft Component imensions Style Trantorque Series Part # diameter (d) Bore () Tq. Thrust L1 L2 A1 A2 B1 B2 Imperial OEM Series Mini 1-1/4 Bore /8" 3/4" 17 in.lbs. 648 lbs. 1-3/16" 7/16" /8" 1/8" Non-Traversing Imperial OEM Series Series 2-1/2 Bore /4 1-1/2 170 in.lbs lbs. 1-21/32" 11/16" 1-1/4" 1-1/2" /16" /16" GT SERIES Actuator Max. Transmissible Shaft Component imensions Style Trantorque Series Part # diameter (d) Bore () Tq. Thrust L1 L2 A1 A2 B1 B2 Imperial OEM Series Mini 1-1/4 Bore /8" 3/4" 20 in.lbs. 92 lbs. 7/8" 7/16" /8" 1/8" Standard Series Imperial OEM Series Series 2-1/2 Bore /4 1-1/2 200 in.lbs lbs. 1-1/2" 3/4" 1-1/4" 1-1/2" /16" /16" Actuator Shaft Component Max. Transmissible imensions Style Trantorque Series Part # diameter (d) Bore () Tq. Thrust L1 L2 A1 A2 B1 B2 Imperial OEM Series Stainless Mini 1-1/4 Bore /8" 3/4" 7 in.lbs. 280 lbs. 7/8" 7/16" /8" 1/8" Series Imperial OEM Series Series 2-1/2 Bore /4 1-1/2 70 in.lbs lbs. 1-1/2" 3/4" 1-1/4" 1-1/2" /16" /16" B1 B1 L1 B2 L2 L1 L2 1
17 OEM- Trantorque (cont.) d A OEM Options- Hub Adapter This option provides an alternative to the conventional output shaft. The Hub Adapter option allows for easy mounting of grippers, tooling, actuators, cylinders and other end effectors that require a flat mounting surface. The Hub is manufactured of aluminum with 4 counter bored through holes on one side and threaded holes on other. Trantorque (see Trantorque section) is used in mounting of the Hub Adapter to the actuator shaft. This attachment method provides infinite hub/hole orientation. Option # M10 M20 Hub Adapter imensions escription W/Mild Steel Trantorque W/Stainless Steel Trantorque OEM 1-1/4 (OC) Series SHORT SERIES Actuator Max. Transmissible imensions Shaft Component Style Trantorque Series Part # diameter (d) Bore () Tq. Thrust L1 L2 A B Imperial OEM Series Mini 1-1/4 Bore /8" 3/4" 20 in.lbs. 92 lbs. /8" 1/4" 3/4" 3/8 Short Series Imperial OEM Series Series 2-1/2 Bore /4 1-1/2 200 in.lbs lbs. 1-1/4" 1/2" 1-1/2" 3-4" A 0.438" 0.70" B 1.63" 2.00" C 1.16" 2.000" # /4-20 L1 TRANTORQUE WITH AAPTOR HUB OEM 2-1/2 (OT) Series 4º L2 Ø C BOLT CIRCLE TAP FOR FASTENER C BORE FOR FASTENER B A Ø B NOTE: Contact Factory for other hub diameters, bolt hole patterns, etc. 16
18 Special Conditions and Limited Warranty etermination of the suitability of any information or product for the application contemplated by any user or the manner of that use is the sole responsibility of the user. Turn-Act, reserves the right to improve or change designs without notice. All orders are subject to acceptance by the factory sales department. Turn-Act, agrees to repair or replace to the original purchaser any standard parts or products for a period of 12 months from date of shipment which Turn-Act determines upon inspection to be defective in workmanship or material. Wear components including but not limited to seals and bearings are excluded from this warranty. Under no circumstance may merchandise be returned without written authorization from the factory. This warranty is void in the event the product has been tampered with, altered, or serviced by unauthorized personnel. Turn-Act s, total responsibility for any claims, damages, losses or liabilities related to the product covered thereunder shall not exceed the purchase price of such product. in no event shall Turn-Act be liable for any special, indirect, incidental or consequential damages of any character, including but not limited to loss of use of productive facilities or equipment, lost profit, property damage, transportation, installation or removal or lost production whether suffered by purchaser or third party. Turn-Act disclaims all liability for any and all cost, claims demands, charges, expenses, and other damages, either direct or indirect, incident to all property damage arising out of any cause of action based on strict liability. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Turn-Act 10 Commerce Way Westminster, SC USA Tel: Fax: Just imagine... How Turn-Act s Answer Engineering can work for you! CAP43 09/0 TB
OEM Series Rotary Actuators
OEM Series Rotary Actuators OEM Series Rotary Actuators: Table of Contents OEM 1-1/4 (OC) Series...pg. 2 How to Order: OEM 1-1/4 (OC) Series...pg. 3 imensional ata...pg. 4 OEM 2-1/2 (OT) Series...pg. How
More informationOEM Series Rotary Actuators. Air-Oil Systems, Inc.
OEM Series Rotary Actuators OEM Series Rotary Actuators: Table of Contents OEM 1-1/4 (OC) Series...pg. 2 How to Order: OEM 1-1/4 (OC) Series...pg. 3 Dimensional Data...pg. 4 OEM 2-1/2 (OT) Series...pg.
More informationTurn-Dex Rotary Vane Actuators
Turn-Dex Rotary Vane Actuators Turn-Dex: Table of Contents Turn-Dex Turn-Dex 1-1/4 Bore pg. 2 How to Order pg. Dimensional Data pg. 4 Turn-Dex 2-1/2 Bore pg. 5 How to Order pg. 6 Dimensional Data pg. 7
More informationTurn-Dex (CD) 1-1/4 Series
rotarybp-qx4-ta 4/1/05 11:7 AM Page 2 Turn-Dex (CD) 1-1/4 Series ROTARY VANE ACTUATORS with integral unidirectional clutch: 6 base models with torque outputs from 1 in.lbs. to 60 in.lbs. Clockwise or Counterclockwise
More informationVal-U-Act Ball Valve Operators. Air-Oil Systems, Inc.
Val-U-Act Ball Valve Operators Specifications: Class-Act (CL) Valve Operator (/4 /4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to /4 48 in. lbs. to 80 in. lbs. As compared to other rotary
More informationRotary Vane Actuators
Rotary Vane Actuators Rotary Vane Actuators Unitized Body Turn-Act s patented extrusion combines tube, stator and bolt lobes into a one-piece unitized body. Unique design provides torsional rigidity allowing
More informationITT Turn-Act Products
ITT Turn-Act Products Rotary Vane Actuators Unitized Body Turn-Act s patented extrusion combines tube, stator and bolt lobes into a one-piece unitized body. Unique design provides torsional rigidity allowing
More informationC-Series Cylinders: Table of Contents
C-Series Cylinders: Table of Contents C-Series C-Series Slide Features... pg. 2 CD and CE Series... pg. 3 Quick Reference... pg. 3 How to Order: C Series... pg. 4 Options: C Series... pg. Dimensional Data
More informationZ-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders
Z-Series Cylinders Z-Series Cylinders: Table of Contents Z-Series Slide Features...pg. 2 ZD and ZE Series...pg. 3 Quick Reference...pg. 3 How to Order: Z Series...pg. 4 Options: Z Series...pg. 5 Dimensional
More informationMulti-Act Integrated Motion Controller
Multi-Act Integrated Motion Controller Multi-Act Overview FEATURES 3 Multi-Act Dimensional Information DESCRIPTION Multi-Act s Integrated Motion Actuators have an output shaft which produces both linear
More informationGuided Slides and Guided Rods
Guided Slides and Guided Rods Guided Slides & Guided Rods: Table of Contents Guided Slides & Guided Rods Guided Slides Product Features...pg 2 Quick Reference...pg 2 How to Order...pg 3 Dimensional Data...pg
More informationRW Series eatures and Benefits
RW Series...............................................................................3-6 eatures and Benefits..............................................................................3 ow To Order....................................................................................4
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationActuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
More informationAir Champ. Product Function & Selection Chart...54 Section Index...55
GENERAL INFORMATION Product escription Index...1 PROUCT NUMBER INEX Product Numbers Index...2-3 FAMILY OF PROUCTS Air Champ Features & Benefits...4 Air Champ Family of Products...5-9 CLUTCHES Product Function
More informationSB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS
ISO 9001 REGISTERE SB4 & SB6 SERIES GOL LINE SIE-BY-SIE SHOT PINS CORROSION & WEL SPATTER RESISTANT RAM MOUNTING FOR CYLINICATOR STYLE SWITCHES (NOT INCLUE) NAAMS STANAR MOUNTING NPT or G S LIGHTWEIGHT
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationAmerican Cylinder Co., Inc. Catalog LSC 1108-E
0 011 American Cylinder Co., Inc. Catalog LSC 1108-E TABLE OF CONTENTS Table of Contents... age 1 How to Order... age 1 hysical ata... age 1 Standard Features and Benefits... age Engineering ata... age
More informationANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg. 4 3 Flange
More informationFlat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
More informationSTROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYDRAULIC CYLINDER LIGHTWEIGHT ALUMINUM BODY
ISO 9001 REGISTERE WP4 & 6 SERIES GOL LINE STROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYRAULIC CYLINER SHOT PINS WP4 40mm SQUARE RAM SOLI STATE CYLINER SWITCH AVAILALE WITH WP4 70mm
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationRT Series Roundline Plus Thrusters
9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order
More informationDAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationPneu-Turn Rotary Actuators
Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationPTR Series Pneumatic Rack & Pinion Rotary Actuator
zact14 Pneumatic Rack & Pinion Rotary Actuator Contents Features... 2 Specifications... 3 Dimensions... 4 Mounting Options... 5 Shaft Options... 6 Port Size and Location... 7 Cushions and Bumpers... 8
More informationCD Couplings SERIES A1C. MTY (81) MEX (55) QRO (442) DIST.
CD Couplings SERIES A1C ZERO-MAX CD COUPLINGS SERIES A1C For today s most demanding servo motor and motion control applications. CD Couplings Series A1C are precise, robust, and available in sizes and
More informationTB Series Brakes Tension Control System
TB Series Brakes Tension Control System P-235-WE Service & Installation Instructions An Altra Industrial Motion Company Contents Installation Instructions...3 Coil Data...4 Maintenance...5 Control Connections...5
More informationRotary Actuator/Vane Style
Rotary Actuator/Vane Style Series :,,,, Basic style Series With angle adjuster Series BWU Fluid Air, CR Vane type Port location Single vane (S) ouble vane () Side ported (Nil) Axial ported (E) S Side ported
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationSC series Stopper Cylinders
SERIES 60,000 PSI tensile strength electro-less nickel rod bearing High strength threaded connection Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover series Stopper Cylinders Common
More informationSC series Stopper Cylinders
High strength threaded connection Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire 60,000 PSI tensile strength electro-less nickel rod bearing Low friction figure 8 piston seal
More informationMTB II Modular Tension Brakes
P-259-1 819-0342 MTB II Modular Tension Brakes Installation Instructions An Altra Industrial Motion Company Introduction The instructions on this sheet cover installation of all replacement components
More informationSingle Post Caliper Brake VC500
Single Post Caliper Brake VC500 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
More informationElectro-Brake 375, 475, 650, 825, 1000, 1225
Electro-Brake 375, 475, 650, 825, 1000, 1225 P-211-WE 819-0043 Installation Instructions An Altra Industrial Motion Company Contents Installation Instructions.... 2 Electrical Coil Data.... 5 Burnishing
More informationLevel Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators
More informationSeries CRB2. Rotary Actuator Vane Style. Size: 10, 15, 20, 30, 40 CRB2 CRBU2 CRB1 MSU CRJ CRA1 CRQ2 MSQ MRQ D- 20- Series Variations.
Rotary Actuator Vane Style Series :,,,, 4 1 Series Variations Standard Vane type Port location Rotating angle Shaft type Fluid (S) ouble vane () Side ported (Nil) Axial ported (E) 9 18 27 ouble shaft W
More informationZ-Tech Severe Chemical Service Valves We Put Control Where You Need It.
Z-Tech Severe Chemical Service Valves We Put Control Where You Need It. Z-Tech Series Valves TABLE OF CONTENTS Ball Valves ZT 4 Series: Three Piece Flanged Ball Valve... -3 Pneumatic Actuators and Accessories...
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More informationOWNER S GUIDE 8A DURALIFT II 13,200 LB. CAPACITY. Link Mfg. Ltd th St. N.E. Sioux Center, IA USA
OWNER S GUIDE 8A000715 DURALIFT II 13,200 LB. CAPACITY Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 www.linkmfg.com QUESTIONS? CALL CUSTOMER SERVICE 1-800-222-6283 DEALER / INSTALLER:
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationPosition Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
More informationVOLUME 11. Rotary Actuators HYDRAULIC AND PNEUMATIC. w w w. m i c r o m a t i c l l c. c o m
VOLUME 11 Rotary Actuators HYDRAULIC AND PNEUMATIC w w w. m i c r o m a t i c l l c. c o m Welcome LP Models LOW PRESSURE PNEUMATIC 150 PSI 45 Standard Sizes 150 PSI Up to 570 in/lbs of of Torque Torque
More informationTable of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More informationGuardian HH Shaft Coupling
Guardian HH Shaft Coupling P-8611-GC GUA-MRK-DOC-028 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS REQUIRED
More informationTECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY
Form TI47-POS A Watts Industries Co. TECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY 47-3000 FEATURES Compact design can be installed in any position Low maintenance epoxy coated aluminum manifold
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL
Rack & Pinion Pneumatic Actuators INSTALLATION, OPERATION & MAINTENANCE MANUAL QSM, Inc. 127 Village Lane Easley, SC 29642 U.S.A. Ph: (864) 605-0150 Fax: (864) 605-0830 www.tru-flo.com TABLE OF CONTENTS
More informationMULTIPOSITION AIR CYLINDER
MULTIPOSITION AIR CYLINDER CAST ALUMINUM FOUR-POSITION - ALL AIR SERVICE INFORMATION MOUNTING! Devices should be mounted and positioned in such a manner that they cannot be accidentally operated. INSTALLATION
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS VANE TYPE SERIES CONTENTS RAN (Standard Type) Basic Model and Configuration 259 Specifications 26 Order Codes 264 Dimensions
More informationAdvanced Technology Tension Clutches
P-220 819-0339 Advanced Technology Tension Clutches Installation Instructions Contents Installation................................. 2 Clutch Repair On the Shaft.................. 4 Clutch Service Major.......................
More informationMINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationRotary Actuators Actuators Three-Position Engineering Specifications/ Application Checklist 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES
More informationKLT and KLS Series Tank Top Return Line Filters
KLT and KLS Series Tank Top Return Line Filters 23 KLT/KLS Series Tank Top Return Line Filters Applications for KLT and KLS Filters Mobile Equipment Construction, Refuse Industrial Power Units Machine
More informationPotentiometer Thrust Plate Kit (50421) Installation & Operator s Instruction Manual
Potentiometer Thrust Plate Kit (0) Installation & Operator s Instruction Manual Thank You The employees of Chore-Time Equipment would like to thank you for your recent Chore-Time purchase. If a problem
More informationBimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD t
Bimba Metric Flow Controls: FCPM Series Specifications Fluid Maximum Operating Pressure Minimum Operating Pressure Temperature Range 3 Air 10 Bar (145 PSI) 0.1 Bar (1.5 PSI) -10º to +80ºC (-14º to +176ºF)
More informationTable of Contents. Crown Right Angle Gear Drives. Phone Toll Free In The U.S or FAX
Gear Drives Table of Contents Crown Right Angle Gear Drives Designed for dependable, economical transfer of speed or power, these drives are compact and feature efficient, quiet operating spiral bevel
More informationPRNA/PRN Series. Vane Rotary Actuators zpr01. Contents Features...G2 Ordering Information...G3 Specifications...G4 Engineering Data...
PRN/PRN Series Vane zpr01 Contents Features...G2 Ordering Information...G3 Specifications...G4 Engineering ata...g5...g7 Mounting Options...G10 Shock bsorbers...g12 Sensor Options...G13 For installation,
More informationGuardian FH Flywheel Coupling
Guardian FH Flywheel Coupling P-8606-GC GUA-MRK-DOC-015 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS REQUIRED
More informationFlat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power)
Flat Cylinders Flat-1 2.3-2.11 SquareFlat-1 2.12-2.18 Flat-11 2.19-2.23 SquareFlat-11 2.24-2.28 FO2, FO3, FO4(multiple power) 2.29-2.34 FOP(multiple position) 2.35-2.41 Flat Accessories 2.42-2.43 EF1 Cylinders
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationSingle-Position Detent Clutch DC Series. (i) MTY (81) MEX (55) QRO (442)
Single-Position Detent Clutch DC Series (i) FORM NO. L-2017-A-001 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationVANE ROTARY ACTUATORS
TOL-O-MATIC, INC. VANE ROTARY ACTUATORS Excellence In Motion 1800-0006E CONTENTS INTRODUCTION TO VANE ROTARY ACTUATORS... 1 UNIQUE COMPONENTS... APPLICATIONS...3 SELECTION...4-5 DIMENSIONS...6-7 1810 SERIES
More informationDelTorq Series 21 ACTUATOR
Jamieson Equipment Company DelTorq Series 21 ACTUATOR INSTALLATION, OPERATION AND MAINTENANCE MANUAL ENGINEERING DATA SHEET E.D.S. NO EDS055 ISSUE DATE - -- 20/01/2007 (Please read the entire instructions
More informationInjection/Sample Quills
Injection/Sample Quills Retractable injection quills are devices that deliver chemicals to a desired location inside piping. Generally, quills are used when relatively small amounts of chemicals are being
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationEasytork Vane Actuator IOM
Easytork Vane Actuator IOM General Storage The Easytork Vane Actuator ( EVA ) is a high-quality product and as such must be handled, transported and stored with care. Prior to storage, inspect the actuator
More informationBulletin H-Tech 03 High Pressure Valves Series H
Bulletin H-Tech 03 High Pressure Valves Series H VALVES The H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control
More informationProduct/ Title Guardian Super Flex Shaft Coupling Product/ Title
Product/ Title Guardian Super Flex Shaft Coupling Product/ Title GUA-MRK-DOC-027 P-XXXX-GC Service&&Installation Installation Instructions Instructions Service An Altra Industrial Motion Company TABLE
More informationPERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES
The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationUSER MANUAL. NEMA 48C Flange Mounted, Enclosed, Clutch Brake. FMCBE Model 500 FORM NO. L A (i)
USER MANUAL NEMA 48C Flange Mounted, Enclosed, Clutch Brake FMCBE Model 500 (i) In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual
More informationFour Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
More informationCompact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
More information½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part #
29 July 2005 2003-04.5 Dodge Cummins OEM Bypass Lift Pump Kit # 1050227-1 - 2003-04½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part # 1050227 PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationGuardian Taper Grid Shaft Coupling
Guardian Taper Grid Shaft Coupling P-8608-GC GUA-MRK-DOC-025 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS
More information