Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
|
|
- Veronica Greer
- 6 years ago
- Views:
Transcription
1 SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting, Single Rod,, Spring Return Construction Materials Barrel xtruded Aluminum, Anodized (0µ) Front Cover Brass: Ø 2 to 40 Aluminum: Ø 50 to 00 Rear Cover Aluminum, Anodized (0µ) Piston Rod Rod Bearing Stainless Steel Teflon Impregnated Brass Piston Delron: Ø 2 to 40 Aluminum: Ø 50 to 00 Seals Guide Rods Guide Rod Bearings NBR (Optional: Viton) Stainless Steel Teflon Impregnated Steel Tooling Plate Aluminum, Anodized (0µ) Bumpers Characteristics Operating Temperature Polyurethane 4 F (-0 C) to 58 F (+70 C) Operating Pressure Min. SZ 6/SZV6 5 PSI ( bar) SZD ø2 38 PSI (2.5 bar) ø6, PSI (2 bar) ø PSI (.5 bar) ø PSI ( bar) Max. 45 PSI (0 bar) Normal Operating Pressure Lubrication Media Installation 90 PSI (6 bar) Pre-lubricated at factory. If additional lubrication is required, use oil compatible with NBR seals and designed for use in pneumatic systems. Filtered and Regulated Compressed Air In any Position Weight See Chart - Page 9 Stroke Length Theoretical Forces Load Capacity Specifications Varies by Bore Size See Technical Information Sheet See Technical Information Sheet Series SZ Ø2mm - 00mm SZ 6: Double Acting, Single Rod, SZD 6: Double Acting, Double Rod, SZV 6: Double Acting, Non-Rotating, SZ 7: Single Acting, Single Rod, Features: Stainless Steel Rod Bumpers Pre-Lubricated Design Inch or Metric Construction Piston Diameter Port Sizes NPT /8 /8 /8 /8 /8 /4 /4 Metric (G) M5 M5 M5 /8 /8 /8 /8 /8 /4 /4 Rod Diameter Inch mm Page 7
2 SZ Compact Cylinder Ordering Information xample: SZV-U 6050/50-D Compact Cylinder Non-Rotating U.S. Option Double Acting, 50mm Bore 50mm Stroke Threaded Body Option S Z V - U / D Versions: SZ Single Rod SZD Double Rod SZV Non-Rotating Options: Standard D Threaded Body, top & bottom Design: Metric Construction - U US Construction: NPT Ports & UNC Threads Actuation: 6 Double Acting, 7 Single Acting, Proximity Sensors/Brackets: See Page 73 Stroke: MM: (standard) any mm increment see stroke length chart on next page for maximum stroke lengths contact factory for special stroke lengths Bore: 02 2mm (nom. /2") 06 6mm (nom. 3/4") mm (nom. 7/8") mm (nom. ") mm (nom. -/4") mm (nom. -/2") mm (nom. 2") mm (nom. 2-/2") mm (nom. 3-/8") 00 00mm (nom. 4") Page 8
3 SZ Compact Cylinder Cylinder Details Standard Bore Ø Strokes (MM) 2mm 6mm 20mm 25mm 32mm 40mm 50mm 63mm 80mm 00mm SZ-U 6 Double Acting, Single Rod SZD-U 6 Double Acting, Double Rod SZV-U 6 Double Acting, Non-Rotating SZ-U 7 Single Acting, Single Rod (Contact the factory for non-standard stroke lengths) Spring Forces Mode Weights Cylinder Type Bore Ø 2mm 6mm 20mm 25mm 32mm 40mm 50mm 63mm 80mm 00mm Cylinder xtended lbf N Retracted Stroke lbf (5mm) N Retracted Stroke lbf (0mm) N Spring Constant lbf/in N/mm Retracted Stroke lbf (25mm) N Spring Constant lbf/in N/mm Bore Ø 2mm 6mm 20mm 25mm 32mm 40mm 50mm 63mm 80mm 00mm SZ 6/7 lbs kg per 0.38"(0mm) lbs kg SZD 6 lbs kg per 0.38"(0mm) lbs kg SZV 6 lbs kg per 0.38"(0mm) lbs kg Page 9
4 Dia. R SZ Compact Cylinder Dimensional Data SZ6 and SZ7 Ø2-00mm Dia. N P SW B C U F+stroke H H +stroke L L G+stroke A M S Q J * K D V SZD 6 Ø2-00mm øn P SW Threaded Mounting Holes: OPTION- D In addition to the counter bored thru-holes, threaded mounting holes are available. The diagram below details this feature. # of threaded hole: SZV: (2) Bottom Only SZ6/7 & SZD 6: (8) Bottom & Top F+stroke H +stroke L H L M G+stroke G + 2xstroke J L 2 Dimension xplanations: J- Hole diameter thru xtrusion K- Counter Bore Diameter L- Body Counter Bore Depth L - Depth of Counterbore in Tooling Plate M- Piston Rod Thread Depth N - Diameter of Guide Rods SZV 6 Ø20-63mm M L * U P T W H H +stroke G+stroke Notes: * The center sensor dovetail is omitted on the Bore 20 Cylinder. - Through holes in Tooling Plate for SZV version Thru-hole in Tooling Plate Counter Bored Holes: The standard cylinders have thru mounting holes that are counter bored. The diagram below shows details of this feature. U2 D O (2) N 2 Page 20
5 SZ Compact Cylinder Dimensional Data Bore A B C D F G G H H J Ø + stroke + stroke + 2 x stroke + stroke Bore J K L L L 2 M M N N 2 O P Ø M M M M4 20 / M M4 M5 25 / /4 20 M M4 M6 32 5/ /4 20 M M5 M8 40 5/ /6 8 M M5 M8 50 5/ /8 6 M M6 M0 63 / /8 6 M M6 M2 80 / /2 3 M M6 00 / /4 0 M M20 Bore P Q R S SW T U U U 2 V W Ø M M M /8 NPT G/ /8 NPT G/ /8 NPT G/ /8 NPT G/ /8 NPT G/ /4 NPT G/ /4 NPT G/ NOT: SZ 7 Spring Return Version: " (25mm) Stroke It is necessary to add the following to the base F & G dimensions Bores: 6 to 25 Add 0.39" (0mm) 32, 40 Add 0.97" (5mm) Page 2
6 NZK Compact Cylinder Specifications Characteristics Symbol Unit Description General Features Type Series Piston Rod Cylinder NZK Configurations NZK6 Double Acting, Single Rod, NZK7 Single Acting, Single Rod, NZK8 Single Acting, Single Rod, Mounting Tube connection See drawing Thread Ambient ϑmin C -20 Note: When using below freezing temperature range ϑmax C +80 point (0 C) it is necessary to consult us Mediums - temperature range ϑmax C +8 Weight (mass) kg See table Installation Medium Lubrication Material Cylinder tube Front/Rear covers Piston rod Pneumatic Characteristics Nominal pressure Pn bar 6 In any position Filtered and lubricated or filtered and unlubricated compressed air Oil mist lubrication compatible with polyurethan Aluminum Aluminum Stainless steel Operating pressure Pmin bar 0.5 (Single acting version:.0) Pmax bar 0 Piston diameter mm Port size G/8 G/8 G/8 G/8 G/8 G/4 Piston rod diameter mm Piston rod thread M6 M6 M8 M8 M0 M2 ) M0x.25 M2x.25 M6x.5 M6x.5 M20x.5 M20x.5 Series NZK Ø32mm - 00mm NZK 6: Double Acting, Single Rod, NZK 7: Single Acting, Single Rod, NZK 8: Single Acting, Single Rod, Features: Stainless Steel Rod Bumpers Pre-Lubricated Design Spring xtend or Retract ISO 643 Mounting Holes Stroke length mm Double acting version: See order instructions Single acting version: 5, 0, 5, 20, 25 Cushioning Spring return force max. N See diagram lastomer cushioning at both ends ) Piston rod thread on series NZK.../...-AG Page 22
7 NZK Compact Cylinder Cylinder Details Dimensions for Basic Cylinder Version: Piston Rod with Female Thread (Series NZK.../...) Series 8000 SW * RT BG ød ød 2 KK AM VA V øb R S l 8 + stroke PL R ølk ± 0,2 H + 2x stroke H + stroke Mounting screws to DIN 92 can be flush-countersunk Cylinder diameters 32, 40, 50 mm: only groove in the middle Dimension Table (mm) for Basic Cylinder Bore AM øb BG ød ød 2 H (* KK 8 ølk PL R RT S SW V VA Ø H9 +stroke +stroke G/ M M G/8 52 M M G/8 53 M M G/ M M G/8 64 M M G/ M M *Series NZK 8000: H + 2x stroke Dimensions for Basic Cylinder Version: Piston Rod with Male Thread (Series NZK.../...-AG) Series 8000 SW BG * RT ød ød 2 KK øb R AM VA V H + 2x stroke l 8 + stroke H + stroke PL S R ølk ± 0,2 Mounting screws to DIN 92 can be flush-countersunk Cylinder diameters 32, 40, 50 mm: only groove in the middle Dimension Table (mm) for Basic Cylinder Bore AM øb BG ød ød 2 H (* KK 8 ølk PL R RT S SW V VA Ø H9 +stroke +stroke G/ M0x M G/8 52 M2x M G/8 53 M6x M G/ M6x M G/8 64 M20x M G/ M20x M *Series NZK 8000: H + 2x stroke Page 23
8 NZK Compact Cylinder Ordering Information Description Symbol Bore Ø Type # Order # Double acting without adjustable end cushioning, for contactless position sensing Single acting, normally retracted, without adjustable end cushioning for contactless position sensing Single acting, normally extended, without adjustable end cushioning for contactless position sensing 32 NZK 6032/... PA NZK 6032/...-AG PA NZK 6040/... PA NZK 6040/...-AG PA NZK 6050/... PA NZK 6050/...-AG PA NZK 6063/... PA NZK 6063/...-AG PA NZK 6080/... PA NZK 6080/...-AG PA NZK 600/... PA NZK 600/...-AG PA NZK 7032/... PA NZK 7032/...-AG PA NZK 7040/... PA NZK 7040/...-AG PA NZK 7050/... PA NZK 7050/...-AG PA NZK 7063/... PA NZK 7063/...-AG PA NZK 7080/... PA NZK 7080/...-AG PA NZK 700/... PA NZK 700/...-AG PA NZK 8032/... PA NZK 8032/...-AG PA NZK 8040/... PA NZK 8040/...-AG PA NZK 8050/... PA NZK 8050/...-AG PA NZK 8063/... PA NZK 8063/...-AG PA NZK 8080/... PA NZK 8080/...-AG PA NZK 800/... PA NZK 800/...-AG PA Complete type designation and order no. with stroke length in mm (4-digits) Stroke Length: MM (standard) Double acting Version: any mm increment up to 500mm standard Single acting Version: 0005,000,005,0020,0025 Contact factory for special stroke lengths Description Bores 32mm 40mm 50mm 63mm 80mm 00mm Foot mounting A-.. PD 2797 PD 2798 PD PD PD PD Rear trunnion mounting B-.. PD PD PD PD PD PD Rear trunnion mounting BA-.. PD 2342 PD 2343 PD 2344 PD 2345 PD 2346 PD 2347 Rear trunnion mounting BAS-..* PD PD PD PD PD PD Front flange mounting C-.. PD PD PD PD PD PD Rear flange mounting D-.. PD PD PD PD PD PD Security bolt for mountings B,BA,BAS KY 653 KY 654 KY 657 KY 656 KY 658 KY 659 Delivery information: on delivery all cylinder mountings, except the trunnion mounting are not assembled Page 24 Dimensional Information: See AZ Series Cylinder on Pages *with spherical bearing
SPECIALTY CYLINDERS. BORES: 88mm to 125mm FEUG/FEHG/FEHK: LINEAR GUIDES
AUTOMATION TECHNOLOGY SPECIALTY CYLINDERS BORES: 88mm to 125mm R: ISO 6432 R/ROV: ROV: ISO OVAL 6432 BORE SZ/SZV: SZ/SZV/NZK: COMPACT COMPACT AZV: TWIN AZ: ROD ISO AZ: 6431 ISO AZV/RDV: 6431 DZB/DZBA TWIN
More informationAZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
More informationPiston Rod Cylinders. Not for new design - Please contact ORIGA Customer Service:
Overview System Fig. Symbol Series Page Single acting For contactless position For contactless position With through piston rod For contactless position Non-rotating For contactless position Single acting
More informationWST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
More informationSeries CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125
ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING
More informationPiston Rod Cylinders. ORIGA simply the first
Piston Rod Cylinders ORIGA simply the first Information on application The contents of this catalog are not binding and are only intended for informational purposes and are not to be considered as offer
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationTube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationCompact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationSpecial valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
More informationShort-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationSeries CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
More informationShort-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
More informationSlim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space
Non-Rotating Elliptical Piston Cylinders, Type DZH Features and Benefits Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space Patented elliptical piston/seal
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationFULL COLOR TAB #12 BTP
FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationSUMMARY KIT PNEUMATIC MOTION
SUMMARY G1 P CONFIGURABLE (KIT PMC) G1.2 P READY (KIT PMR) G1.3 P CUSTOM G1.9 SUMMARY G1.1 CONFIGURABLE (KIT PMC) An on-line configurator is provided for the ease-and-quick selection of the cylinder, the
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationStandards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationbar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
More informationPiston Rod Cylinders Bellows Cylinders. Special strengths for specific request
Piston Rod Cylinders Bellows Cylinders Special strengths for specific request Information on application The contents of this catalog are not binding and are only intended for informational purposes and
More informationAir Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
More informationCylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationCompact Cylinders ADN Inch Series, Based on ISO Overview
Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space
More informationStandards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationScrewed-head cylinders
Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,
More informationBTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!
BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationDIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS
SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationRT2 RT3. ORIGINAL UNIVER Original design and technology. INDUSTRIALIZED Industrialized components and advanced technology
RT Telescopic cylinders RT2 2 stages 25 mm ORIGINAL UNIVER Original design and technology INDUSTRIALIZED Industrialized components and advanced technology REDUCED DIMENSIONS 60% less than standard cylinders
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationFlat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.
series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500
More informationP1E Series ISO Cylinders
High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationHeavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationCompact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationClimax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina
Climax Pneumatics Cnomo NFE 49001 Cylinders 1-800-732-8704 Easley, South Carolina End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More information2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.
General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationStandard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationConstruction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston
Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze
More information1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
More informationStandards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
More informationStainless Steel Cylinders Acid and Corrosion Resistant
Stainless Steel Cylinders Acid and Corrosion Resistant Subject to change 133 Stainless Steel Cylinders Contents Stainless Steel Double-Acting Cylinders per ISO 6432 Bores 12 to 25 mm Type CRDSNU... 137
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationWIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationRexMover Series 277 & 297 Rodless Shuttle Cylinder
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationTie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
More informationPneumatic cylinders Compact cylinders Series P1J
Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationAIR PREPARATION UNITS 1/8" NPT & 1/4" NPT SERIES light
PNEUMATIC GROUP AIR PREPARATION UNITS 1/" NPT & 1/" NPT SERIES,,,, MPa 1,,,,, MPa 1, 1 3 5 7,,,, MPa,, 1, MPa, Made in Germany MR- E MPa 1,,,,, 1,, p max= Port size Recommended flow Type Page No. (l/min)*
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationDB4 GUIDED SLIDE APPLICATIONS: ISO 9001 REGISTERED RETRACTABLE PINS & LOCATORS PUSHERS CROWDERS THRUSTERS SMALL LIFTERS SLIDES
ISO 9001 REGISTERED DB4 GUIDED SLIDE 1/4" NPT or G1/4 PORTS RAP OR RIGID COUPLER TOOL MOUNTING SURFACE WELKER 70mm BORE PNEUMATIC CYLINDER SOLID STATE CYLINDER SWITCH NAAMS STOPS OR WELKER SMART STOPS
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationDouble-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More information