NEW. ABEC 3 Double-Shielded Corrosion-Resistant Lightweight. Overall Length Overall. Length
|
|
- Bathsheba Cross
- 6 years ago
- Views:
Transcription
1 NW Pillow lock-mounte all earings Miniature ouble-shiele orrosion-resistant ightweight Ø W Ø eatures: ubricate for the life of the bearing Meical, scientific & pharmaceutical applications Operating Temperature: - to +4 MTRIS RIN Stainless Steel PIOW OK Sintere luminum XK PSRZZ XK PSRZZ XK PSRZZ XK PSR0Z XK PSR6ZZ ia eight ength With ength Nominal lange Thickness (Ref.) XK PSRZZ XK PSRZZ XK PSRZZ XK PSR0Z XK PSR6ZZ eight to enterline ± ole ia W ousing With Spee rpm Raial oa lbf RV:.9. M 7
2 NW Pillow lock-mounte all earings Miniature ISO lass 6 ouble-shiele orrosion-resistant ightweight T Ø The projections shown are per ISO convention. eatures: ubricate for the life of the bearing Meical, scientific & pharmaceutical applications Operating Temperature: -0 to +0 MTRIS RIN Stainless Steel PIOW OK Sintere luminum XKMPSMR604 XKMPSMR69 XKMPSMR6 XKMPSMR XKMPSMR6 ia eight ength With 0. istance T Nominal lange Thickness 6 (Ref.) XKMPSMR604 XKMPSMR69 XKMPSMR6 XKMPSMR XKMPSMR6 eight to enterline ± ole ousing With Spee rpm Raial oa N MTRI RV:.9. M 7
3 NW Neele Roller Pillow lock-mounte earings rawn up Neele Roller earing Sintere luminum Pillow lock Ø eatures: Self-aligning to ± Self-lubricating orrosion-resistant ightweight XK-P0N XK-PN XK-P7N XK-P00N XK-P6N XK-P470N Nom. /4 /6 Recommene ia Min Operating Temperature: - to + eight -/ -9/6-9/6 ength -/4 -/4 With 7/6 / (Ref.) XK-P0N XK-PN XK-P7N XK-P00N XK-P6N XK-P470N istance Nominal lange Thickness /4 /6 9/6 eight To enterline 9/6 -/4 ole ia. 9/ / 9/6 Spee rpm Raial oa lbf RV: -- SS 7
4 NW Neele Roller Pillow lock-mounte earings rawn up Neele earing Sintere luminum Pillow lock Ø Ø T The projections shown are per ISO convention. eatures: Self-aligning to ± Self-lubricating orrosion-resistant ightweight XKMP6MN XKMPMN XKMP0MN XKMPMN XKMPMN XKMP4MN Nom. 6 0 Recommene ia Min Operating Temperature: -0 to +00 eight ength 7. 7 With 6 0 (Ref.) XKMP6MN XKMPMN XKMP0MN XKMPMN XKMPMN XKMP4MN istance T Nominal lange Thickness eight To enterline 4. 9 ole Spee rpm Raial oa N MTRI RV: -- SS 7
5 NW Sintere ronze Pillow lock-mounte earings Sintere ronze earing S 40 Sintere luminum Pillow lock Ø eatures: Self-aligning to ± Self-lubricating orrosion-resistant ightweight XK-P0 XK-P XK-P7 XK-P00 XK-P6 XK-P70 XK-P7 XK-P4000 Nom. /4 / ctual Min Operating Temperature: -0 to +00 eight -/ -/6-9/6 ength -/4 -/4 4 With 7/6 / (Ref.) XK-P0 XK-P XK-P7 XK-P00 XK-P6 XK-P70 XK-P7 XK-P4000 istance - - -/ 4 Nominal lange Thickness /4 /6 / 9/6 eight To enterline 9/6 -/4 ole ia. 9/ / 9/6 Spee rpm Raial oa N RV: -- SS 7
6 NW Sintere ronze Pillow lock-mounte earings Sintere ronze earing S 40 Sintere luminum Pillow lock Ø Ø T The projections shown are per ISO convention. eatures: Self-aligning to ± Self-lubricating orrosion-resistant ightweight XKMP6M XKMPM XKMP0M XKMPM XKMPM XKMPM XKMP40M XKMP4M Nom ctual Min Operating Temperature: -9 to +9 eight ength 7. 7 With (Ref.) XKMP6M XKMPM XKMP0M XKMPM XKMPM XKMPM XKMP40M XKMP4M istance T Nominal lange Thickness eight To enterline 4. 9 ole Spee rpm Raial oa N MTRI RV: -- SS 7
7 NW PT ronze Pillow lock-mounte earings PT Impregnate ronze earing Sintere luminum Pillow lock Ø eatures: Self-aligning to ± Self-lubricating orrosion-resistant ightweight XK-P0P XK-PP XK-P7P XK-P00P XK-P6P XK-P70P XK-P4000P Nom. /4 /6 Recommene ia Min Operating Temperature: -0 to +40 eight -/ -9/6-9/6 ength -/4 -/4 With 7/6 / (Ref.) XK-P0P XK-PP XK-P7P XK-P00P XK-P6P XK-P70P XK-P4000P istance Nominal lange Thickness /4 /6 9/6 eight To enterline 9/6 -/4 ole ia. 9/ / 9/6 Spee rpm Raial oa lbf RV: -- SS 7
8 NW PT ronze Pillow lock-mounte earings PT Impregnate ronze earing Sintere luminum Pillow lock Ø Ø T The projections shown are per ISO convention. eatures: Self-aligning to ± Self-lubricating orrosion-resistant ightweight XKMP6MP XKMPMP XKMP0MP XKMPMP XKMP6MP XKMPMP XKMP40MP XKMP4MP Nom Recommene ia Min Operating Temperature: -0 to + eight ength With 6 0 (Ref.) XKMP6MP XKMPMP XKMP0MP XKMPMP XKMP6MP XKMPMP XKMP40MP XKMP4MP istance T Nominal lange Thickness eight To enterline 4. 9 ole Spee rpm Raial oa N MTRI RV: -- SS 7
9 NW Stanar uty PIOW OKS-ST SRW TYP ast Iron ousing Soli ase ual Seal Type N 4 N 0 S N J Ø J N N 0 S olt Size Weight lb. XK UP0S XK UP00S XK UP0S XK UP04 XK UP04 XK UP0 XK UP06 XK UP06 XK UP069 XK UP060 XK UP070 XK UP07 XK UP07 XK UP07 XK UP04 XK UP0 XK UP096 XK UP097 XK UP09 XK UP00 XK UP0 XK UP XK UP4 XK UP XK UP6 XK UP XK UP9 XK UP40 XK UP444 XK UP4 XK UP7 XK UP6 /6 -/6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /4 - -/6 -/6-7/6 -/6 - -/6 -/ -/ / -/4-4 4-/6 NOT: See page for insert bearing ata. - 6-/6 6-9/6 7-/ 7-7/6 -/ -7/ 9-0-/6 0-/ 0-/ -7/ -7/ / /4 6-/ 7-/6-9/ -7/ 9-0-/6 -/4 -/ / -/ -/4 - -9/ - -7/ - -9/ -/ / 9/6 9/ 9/ 9/ -/6 /6 /6 -/6 -/ -/ -/6 -/6 9/6 9/ / / /6 /6 -/ -/6 -/ -/4 -/6 -/ / - -7/ 4-/ 4-/ 4- -/ - 6-/ 6-7-/6 7-/ 7/6 / 9/6 /6 -/6 -/6 -/ -9/6 -/64-7/ -/ - -/6 -/6 -/6 -/ -/6-9/6-9/6 -/6 -/
10 NW Stanar uty PIOW OKS-OKIN OR TYP ast Iron ousing Soli ase ual Seal Type ccentric ollar N 4 N 0 S N J Ø J N N 0 S olt Size Weight lb. XK P0S XK P00S XK P0S XK P04 XK P04 XK P0 XK P06 XK P06 XK P069 XK P060 XK P070 XK P07 XK P07 XK P07 XK P04 XK P0 XK P096 XK P097 XK P09 XK P00 XK P0 XK P XK P4 XK P XK P6 XK P XK P9 XK P40 XK P444 XK P4 XK P7 XK P6 /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /4 - -/6 -/6-7/6 -/6 - -/6 -/ -/ / -/4-4 4-/6 NOT: See page for insert bearing ata. - 6-/6 6-9/6 7-/ 7-7/6 -/ -7/ 9-0-/6 0-/ 0-/ -7/ -7/ / 4-4-/ /4 6-/ 7-/6-9/ -7/ 9-0-/6 -/4 -/ - -/ - -/ -/ -/4 - -9/ - -7/ - -9/ -/ / 9/6 9/ 9/ 9/ -/6 /6 /6 -/ -/ -/ -/6 -/6 9/6 9/ / / /6 /6 -/ -/6 -/ -/4 -/6 -/ / - -7/ 4-/ 4-/ 4- -/ - 6-/ 6-7-/6 7-/ 9/6 /6 /6 7/ 7/ / -/ -7/ -/ -/ -/ /6 / -/ -/ / -7/ -/ -/6 -/ /
11 NW Stanar uty our-olt lange locks ST SRW TYP ast Iron ousing ual Seal Type 4 N 4 J S J Ø J N S olt Size Weight lb. XK U0S XK U00S XK U0S XK U04 XK U04 XK U0 XK U06 XK U06 XK U069 XK U060 XK U070 XK U07 XK U07 XK U07 XK U04 XK U0 XK U096 XK U097 XK U09 XK U00 XK U0 XK U XK U4 XK U XK U6 XK U XK U9 XK U40 XK U444 XK U47 XK U4 XK U7 XK U6 /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /6 -/4 - NOT: See page for insert bearing ata /4 4-9/ -/ -/ / 9-/4 -/ -7/ - -9/ - 4-/ 4-/ 4- -/ / / 9/ 7/ -/ -/6-7/ -/ -/ -9/6 7/6 7/6 9/ 9/ /6 / -/6-7/ -/ -/ - -9/6 -/ / -/ -7/ -/ -/6-7/ -/6 -/ -9/ - -/ -/6 -/ -/6 - -/ -/ -7/6 -/ 7/6 7/6 7/6 7/6 9/6 9/6 7/6 9/6 /6 -/6 -/6 -/ -9/6 9/
12 NW Stanar uty our-olt lange locks OKIN OR TYP ast Iron ousing ual Seal Type ccentric ollar 4 N 4 J S J Ø J N S Min. olt Size Weight lb. XK 0S XK 00S XK 0S XK 04 XK 04 XK 0 XK 06 XK 06 XK 069 XK 060 XK 070 XK 07 XK 07 XK 07 XK 04 XK 0 XK 096 XK 097 XK 09 XK 00 XK 0 XK XK 4 XK XK 6 XK XK 9 XK 40 XK 444 XK 4 XK 7 XK 6 /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /4 - NOT: See page for insert bearing ata /4 4-9/ -/ -/ / 7- -/ 9-/4 -/ -7/ - -9/ - 4-/ 4-/ 4- -/ / / 9/ 7/ -/ -/6-7/ -/ -/ -9/6 7/6 7/6 9/ 9/ /6 / / -/6-7/ -/ -/ - -9/6 -/ / -/ -7/ -/ -/ /6 - -/ -7/ -/4 - -/ -7/ -/4 -/ - -/ 7/6 7/6 7/6 7/6 9/6 9/6 9/6 / /6 7/ 7/ / -/ -7/ -/ -/ -/ -7/ -/ -/ -/ -/ -7/ -/6 -/ -/6 - -/6 9/
13 NW ronze earing N-MOUNT RINS S-40 Oil-Impregnate ronze earing Sintere luminum ousing Self-ligning Type T Ø The projections shown are per ISO convention. eatures: lange-mounte Self-aligning to ± ightweight ST ROMMNTIONS s shoul be harene to R 9 with 6 µin. finish. s ens shoul have raii or be chamfere. SIN PRMTRS OPRTIN TMPRTUR: -40 to +49 Nom. Min. KM6M KMM KM0M KMM KMM KMM KM6M KMM KM0M KM40M KMM KM0M T ia Spee rpm oa N Weight g MTRI Rev: 4-- SS 79
14 NW ronze earing N-MOUNT RINS S-40 Oil-Impregnate ronze earing Sintere luminum ousing Self-ligning Type Ø eatures: lange-mounte Self-aligning to ± ightweight ST ROMMNTIONS s shoul be harene to Rc 9 with 6 µin. finish. s ens shoul have raii or be chamfere. SIN PRMTRS OPRTIN TMPRTUR: -0 to +00 Nom. ia. Min. K-0 K- K-7 K-00 K-00 K-400 K-6 K-46 K-70 K-470 K-47 K-000 K-0 /4 /6 -/ ia Spee rpm Raial oa lbf Weight oz Rev: 4-- SS 79
15 NW Stanar uty Two-olt lange locks ST SRW TYP ast Iron ousing ual Seal Type 4 N S J Ø J N S olt Size Weight lb. XK U0S XK U00S XK U0S XK U04 XK U04 XK U0 XK U06 XK U06 XK U069 XK U060 XK U070 XK U07 XK U07 XK U07 XK U04 XK U0 XK U096 XK U097 XK U09 XK U00 XK U0 XK U0 XK U XK U4 XK U XK U6 XK U XK U9 XK U40 XK U444 XK U47 XK U4 XK U7 XK U6 /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /6 -/ /6 -/ -7/ 6-/ 6-7-/ 7- -/6 9-7/ 0-/ 0-7/6 0-7/ -9/ NOT: See page for insert bearing ata. -9/6-4- -/ -/6-7/ 6-/6 7-/4 7-/ -9/ / 0-7/6 -/4 - -/6 -/ -9/6 -/6 4-/4 4-7/ -/ - 6-/ 6-/6 6-/ 7- -/6 9/ 9/ 7/ -/ -/6-7/ -/ -/ -9/ 0 7/6 7/6 7/ 7/ 9/6 9/6 -/6-7/ -/ -7/6 - -9/ -/6 -/ -/ -/6 -/ -/6-7/ -/6 -/ -9/ - -/ -/6 -/ -/6 - -/ -/ -7/6 -/6 7/6 7/6 7/6 7/6 9/6 9/6 - - / / 7/6 9/6 /6 -/6 -/6 -/ -9/
16 NW Stanar uty Two-olt lange locks OKIN OR TYP ast Iron ousing ual Seal Type ccentric ollar 4 N S J Ø J N S Min. olt Size Weight lb. XK 0S XK 00S XK 0S XK 04 XK 04 XK 0 XK 06 XK 06 XK 069 XK 060 XK 070 XK 07 XK 07 XK 07 XK 04 XK 0 XK 096 XK 097 XK 09 XK 00 XK 0 XK XK 4 XK XK 6 XK XK 9 XK 40 XK 444 XK 4 /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /6 -/ -/6 6-/ 6-7-/ 7- -/6 9-7/ 0-/ 0-7/6 0-/6 NOT: See page for insert bearing ata. -9/6-4-9/ -/ -/ -7/ 6-/6 7-/4 7-/ -9/ - -7/ -/4 - -/6 -/ -7/ -/6 4-/4 4-7/ -/ - 6-/ 6-/6 6-/ 9/ 9/ 7/ / -/ -/6-7/ -/ 7/6 7/6 9/6 9/6 / / / / -/6-7/ -/ -/ - -9/6 -/6 -/6 - -/ -/ -/ -/ - - -/6 - -/ -/6 -/4 - -7/ -/4-7/6 7/6 7/6 7/6 9/6 9/6 9/6 / /6 7/ 7/ / -/ -7/ -/ -/ -/ -7/ -/ -/ -/ -/ -7/ -/6 -/ -/6 - -/
17 NW Stanar uty RIN INSRTS-ST SRW TYP Wie Inner Ring earing ubrication roove with ole on Set Screw Sie itional Oil ole on Opposite Sie ntirotation evice ual Seal h -N S S XINS U0S XINS U00S XINS U0S XINS U04 XINS U04 XINS U0 XINS U06 XINS U06 XINS U069 XINS U060 XINS U070 XINS U07 XINS U07 XINS U07 XINS U04 XINS U0 XINS U096 XINS U097 XINS U09 XINS U00 XINS U0 XINS U0 XINS U XINS U4 XINS U XINS U6 XINS U XINS U9 XINS U40 XINS U444 XINS U47 XINS U4 XINS U7 XINS U6 XINS U064 Ø /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /6 -/4-4 NOT: See pages 76, 7 & 0 for matching blocks. S S h N #0- /4- /4- /4- /6-4 /6-4 / /6-0 7/6-0 7/ asic oa Rating lb. ynamic Static Weight lb
18 NW Stanar uty RIN INSRTS-OKIN OR TYP Wie Inner Ring earing ubrication roove with ole on ollar Sie itional Oil ole on Opposite Sie ntirotation evice ual Seal h S XINS 0S XINS 00S XINS 0S XINS 04 XINS 04 XINS 0 XINS 06 XINS 06 XINS 069 XINS 060 XINS 070 XINS 07 XINS 07 XINS 07 XINS 04 XINS 0 XINS 096 XINS 097 XINS 09 XINS 00 XINS 0 XINS XINS 4 XINS XINS 6 XINS XINS 9 XINS 40 XINS 444 XINS 4 XINS 7 XINS 6 Ø /6 /6 -/ -/6 -/4 -/4 -/6 - -7/6 - -9/6 - -/ /6 -/ -/6 -/4 - -7/ /4 - NOT: See pages 77, 79 & for matching blocks. asic oa S h Rating lb. Weight lb. ynamic Static
19 NW Pillow lange-mounte all earings igh hromium lloy Steel earing arbon Steel, lack Oxie inish lange & Retainer Ø. Ø The projections shown are per ISO convention. eatures: Self-aligning to ± Pillow flange-mounte ouble shiels Specifications: Spee: rpm Raial oa: 44 N Operating Temperature: -4 to + XKMPM XKMP6M XKMPM Nom. 6 MTRI Rev: 4-- SS
20 NW Pillow lange-mounte all earings igh hromium lloy Steel earing arbon Steel, lack Oxie inish lange & Retainer Ø eatures: Self-aligning to ± Pillow flange-mounte ouble shiels Specifications: Spee: rpm Raial oa: lbf Operating Temperature: -0 to +0 XK-P7 XK-P0 XK-P Nom. /6 /4 /6 Rev: 4-- SS
RoundWay Linear Roller Guides #11
RounWay Linear Roller Guies #11 3 13 1 2 4 NW 5 NW 6 8 10 NW NW 7 9 11 12 14 IGST LODS, OST RUGGD, STST SPD ND LRTION RounWay* Linear Roller Guies Offer: Up to twenty times the loa capacity of conventional
More informationDURALINE BEARINGS N-1. DuraLine Features... N-2. Pillow Blocks... N-3 to N-6. Flange Blocks... N-7 to N-10. Flange Bracket Bearings...
URIN RIN uraine................................................. N-2 Pillow locks.................................................... N-3 to N-6 Flange locks...................................................
More informationEdition Selection Guide for Inch Size Ball Bushing Bearings
2003-200 ition Selection Guie for Inch Size all ushing earings 1-800-55-866 www.thomsonballbushing.com Mechanical an lectro-mechanical Prouct Solutions by anaher Motion anaher Motion engineers, manufactures
More informationBEARINGS WITH CAGE - GUIDED NEEDLES
EARINGS WITH AGE - GUIE NEELES Technical features earings with cage - guie neeles ONSTRUTION The basic constructions of neele roller bearings are: 1 ) 10 ). Neele roller bearings with integral flanges
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationRBC Track Runners Heavy-Duty Stud-Type Track Rollers
RC Track Runners Heavy-uty Stu-Type Track Rollers Smoother. Faster. Longer. ecause That s How We Roll. RC Track Runner Plain Track Rollers SL SL S THREA S THREA all earing () Style Roller earing (TR) Style
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationGP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationSpecialty Ball Bearings
Specialty all earings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2000 www.rbcbearings.com 800.390.3300 RC earings Incorporated (RC earings, RC) has had a long
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationTABLE OF CONTENT. Single Row Radial Ball Bearings. Female Rod Ends. Male Rod Ends. Spherical Plain Bearings with PTFE Liner. Solid Type Shaft Collar
Since 001, GR earings, a 100% Canaian family owne company, has been a successful bearing supplier to Distributors an OEMs across Canaa. Our bearings are mainly importe from carefully selecte manufacturers
More informationCATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More informationMaximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM
RIN S LTION TORS We recommend that testing be done in the actual operating environment to determine if a certain bearing unit is suitable for the application. Many variations can occur such as temperature,
More informationNSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
More informationAngular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
More informationRW Series eatures and Benefits
RW Series...............................................................................3-6 eatures and Benefits..............................................................................3 ow To Order....................................................................................4
More informationE920 Series Bearings. Locking Collars. Tapered Roller Bearing. Locking Collars. Rubber Contact Seal. Outer Race. One-Piece Cast Iron Housing
rowning E920 Series Tapered Roller earing rowning 920 series mounted tapered roller bearings feature one-piece durable cast iron non-expansion housings with Type E mounting dimensions and limited misalignment.
More informationQuadLube, SpreadLock Seal, ImpactTuff, DuraLube TM Spherical Plain Bearings
QuaLube, SpreaLock Seal, ImpactTuff, uralube TM Spherical Plain earings Innovative prouct features that provie unique performance avantages. High loa capacity, re-lubrication options, an patente esigns.
More information- RBL Ball Bearings SS-6 Ball Bearings 12 SS-R Ball Bearings Inch 13
- R Mounte Units UC all earing Insert.. UCP/UCTP Pillow lock Units UCF/UCTF Four olt Flange Units UCF/UCTF Two olt Flange Units.5 UCP/UCTP Tappe ase Pillow lock Units... 6 UCF/UCTF Three olt Flange Units..
More informationRadial Insert Ball Bearings Housed Bearing Units
Raial Insert all earings House earing Units Technical rouct Information TI 110 This publication has been prouce with a great eal of care, an all ata have been checke for accuracy. However, no liability
More informationINDUSTRIALINE MOUNTED BEARINGS
INUTRIAIN OUNT ARIN ounted earing Features Index... -1 Features Index... -4 ngineering and election all earing Units... -6 100 eries Pillow locks... -8 100 eries Flange locks... -10 100 & 200 eries oad
More informationPresentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More informationPipe Supports PS 1. PO Box Highbrook Auckland
1 salesinfo@mechanicalsupport.co.nz PO ox 204336 Highbrook uckland www.mechanicalsupport.co.nz 2 2 Piece lips To Suit Outside Pipe iameter Width x Thickness E2024 HG 8 32 x 1.6 0.04 E2025 HG 11 32 x 1.6
More informationTechnical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
More informationMK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationR100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives
R100/R200 Series & R100/R200 Series Spiral evel ear rives R100/R200 R100/R200 oston R and R 100 and 200 Series Spiral evel ear oxes are available in four sizes with horsepowers ranging from 2.19 to 50.92.
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationKUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
More information"F" Series MGS Reducer Round Flange "F" Housing Shaft Output Dimensional Data
Round Flange "F" ousing Shaft Output imensional ata Y X L P V U UA G Y Y YA Q U 1 U M A rawing for Units F102VF F603VF O N J ia. on F olt ircle T Table No. 1 "F" Series Round Flange imensions (Inches)
More informationTitan Flow Control, Inc. Your pipeline to the future!
Titan Flow ontrol, Inc. Your pipele to the future! Series F 75 Wafer > ast Iron Series F 76 ug > uctile Iron esigned accordance with: MSS-S-67 & I 609 olor oded: Orange ody is M Seat lue ody is una-n Seat
More informationNon-Metallic Track Rollers
Toll ree 800-323-0966 e-mail: sales@pcimfg.com or drawings@pcimfg.com Non-Metallic Track s eatures conomical corrosion resistant alternative to stainless steel liminates noise by elimination of metal-to-metal
More informationCabinet. Drawer. 19.1mm (0.75") 53.0(2.09) SLIDE TRAVEL ±4 SLIDE LENGTH ±1. Cabinet. Drawer. 4.6x9.5 Ø4.3 Ø
53.0(2.0) 1.1mm (0.75") 53.0(2.0) 1.1mm (0.75") S TRV ±4 S TRV ±4 S NT ±1 S NT ±1 53 1.1 53 1.1 35 30 10.6 12.6 12.7 10.6 12.6 12.7 12.6 35 12.6 4.6x.5 Ø6.4 4.6x.5 Ø6.4 M N 35 30 35 M N www.kingslide.com
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationNSK LINEAR GUIDES Miniature PU Series/PE Series. NSK Miniature Linear Guides, ideal for semiconductor manufacturing and medical equipment.
NS INAR UIDS Miniature PU Series/P Series NS Miniature inear uides, ideal for semiconductor manufacturing and medical equipment. Smooth motion and unprecedented lightness he advanced NS Miniature inear
More informationAdvanced Linear Motion Technology Guide
vance Linear Motion Technology Guie The complete selection guie for inch size linear motion components 2000 ition To place an orer call: In North merica: 1-800-55-TOMSON urope: () 1271 33 500 lsewhere:
More informationShaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More informationReduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
More informationSTROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationDECK FITTINGS DECK FITTINGS
ITTINS ITTINS TS R ONY SMP O SOM TYPS VI. MNY OTRS IN STO. T US NOW YOUR RQUIRMNTS! STOS IN T WST OST N T U. WWW.WTRMNSUPPY.OM MI PON X ITTINS SIN POINT MOORIN RRNMNT OR SIPS These requirements are applicable
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationProduct Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
More informationHSD/KTV/KRS NKZ/GPN GSZ-6
Submersible San s S/KTV/KRS NKZ/GPN GSZ- Printe on recycle paper with soy ink - Evience of our coitment to the environment menities from Technology for People an the Earth Innovations that ensure high
More informationPoly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
More informationSine encoders Insulated through hollow shaft ø inch sinewave cycles per turn
Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons
More informationTechnical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationCONVEYOR COMPONENTS & ACCESSORIES
STION 28 - ONVYOR OMPONNTS & SSORIS ONVYOR OMPONNTS & SSORIS ipod, Tripod & ross ases... 28-3 Side Guides... 28-9 Joints & Supports... 28-4 onveyor Tube... 28-10 lamps & Rods... 28-5 to 28-8 Mounting rackets...
More informationSEALS FOR NEEDLE ROLLER BEARINGS
Precautions for Use Features Seals for Neele Roller Bearings have a low sectional height an consist of a sheet metal ring an special synthetic ruer. As these seals are manufacture to the same sectional
More informationITT. CentriPro Fiberglass Basins, Covers, Hatches, Access Doors and Accessories. CentriPro. Engineered for life BCBASIN R4. Wastewater.
CASIN R4 ITT CentriPro Fiberglass asins, Covers, Hatches, Access oors and Accessories CentriPro is a brand of ITT Corporation. www.centripro.com CentriPro Features Fiberglass asins - heavy duty construction,
More informationFEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PL Series igh Performance Lug Style utterfly Valve The PL is a high performance lug style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range of
More informationSpherical Roller Bearings Units: Rexnord PT Select Series
Spherical Roller earings Units: Rexnord PT Select Series Contents Page eatures and enefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow locks 198 lange locks 202 Industries Served Aggregates
More informationFEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PW Series igh Performance Wafer Style utterfly Valve The PW is a high performance wafer style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range
More informationTHIN SECTION BALL BEARINGS RADIAL CONTACT, C-TYPE
106 KAA Series: Cross Section Size: " KA " K 5/16" KC " K " KF 3/4" KG 1".187.0.312.3.500.0 1.000 *The alphanumeric identification system is used under license. PART *NUMER* iameter 1.5000 2.0000 2.0000
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationWaterPumps QH QV QVK
WaterPumps Q QV QV Introduction IRON Pump /S was founded in 10 and since then the company has manufactured a great variety of pumps covering both the marine and industrial markets. Through the years the
More informationPV STYLE LEAD SCREW NUTS
PV STYE E SCREW NUTS For Use With PS Series ead Screws NUT SPECIFICTIONS Material: Polyacetal with lubricating additive Tensile Strength: 9,700 PSI at 73 O F Shear Strength: 9,500 PSI at 73 O F SYSTEM
More informationNAAMS Standards Compliant Power Clamp Cylinder ø50, ø63
NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction
More informationTighteners and Idlers
Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission
More informationInformation. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
More informationPort Size. Connection G1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1. Standard nominal flow rate * 3000 I/min I/min I/min I/min I/min.
1/4-1 MXLOW LTRS Made as per SO 5782-1 standard. igh level of condensate seperation. Sturdy construction in aluminium. asy removal/refixing of bowl owl guard for 3/8" & 1/2" Size offered as a standard
More informationTechnical data sheet. Type overview. Technical data. Safety notes
Technical ata sheet 7..R For close col an warm water systems For water-sie moulating control of air-hanling an heating systems overview N kvs [ m³/h] Stroke PN Sv min. 711R 15 0.63 15 6 50 712R 15 1 15
More informationSpecialty Ball Bearings
Specialty Ball Bearings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2008 www.rbcbearings.com 800.390.3300 RBC Bearings has had a long tradition of innovation,
More informationHELICAL BEVEL DRIVES K-1
K ELIAL EVEL RIVES elical evel Product eatures......................................k1 to K3 Selection Procedure............................................ K4 to K5 escriptions.....................................................
More informationWorm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationISO 6431/6432 Cylinders
ISO 6431/6432 ylinders ISO 6431, VDM 24562 ir ylinders 11.2-11.6 ISO 6431 11.7-11.9 ISO 6432/TOP ylinders 11.10-11.22 ISO 6432 11.23 P ir ylinders 11.24-11.26 P 11.27 ISO 6431/6432 imba ISO 6431, VDM 24562
More informationVertical Multi-stage Pumps - 60 Hz.
P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX
More informationSpecialty Bearing Interchange Guide
pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More informationStainless Steel Mounted Bearings
tainless teel s More Models Now vailable with Eccentric ocking ollar roduct eatures ynthetic lip with stainless steel flinger provides superior protection for high pressure washdown conditions re-filled
More informationMINIATURE PRECISION TORQUE SPLINES ITAR
INITUR PRISION TORQU SPINS ITR Helix inear Technologies, Inc., eachwood, Ohio OPNY Helix is a global supplier to the edical evice, ife Science, Security, Semiconductor, erospace, lectromechanical and efense
More informationDetector (General, FM/CSA Nonincendive Approval)
No. SS2-MGG200-0100 (Rev.7) Magne 3000 US Smart Electromagnetic Flowmeter Detector (General, FM/S Nonincendive pproval) Model MGG18, MGG19 OVERVIE The Magne 3000 US electromagnetic flowmeter detector is
More informationQuick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
More informationXT-Series & AT-Series Alternators Designed for Recreational Applications
XT-Series & AT-Series Alternators esigned for Recreational Applications 170A or 220A in a Small ase Package Up to 140A at dle Speeds Patented Smart Ready Technology (XT-Series Only) ual an ooling, igh
More informationUnimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, Powerful High Dynamic AC Servo Motors
Unimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, owerful igh ynamic AC Servo Motors Compact, owerful igh ynamic AC Servo Motors esigned for maximum torque density, the Unimotor hd brushless AC
More informationSection Contents RADIAL BALL BEARINGS
Section ontents RDI ERIGS ERIG SERIES ERIG DESRIPTIO PGE IFORTIO ERIG, GEER OVERVIEW 189 IFORTIO OUTED UIT, GEER OVERVIEW 190 P / IDETIFITIO ERIGS 191 P / IDETIFITIO OUTED UITS 191 ITERHGE SI OUTED UIT
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationAccessory Overview UHW
ccessory Overview rom a single actuator to a multi-actuator system, a comprehensive range of accessories is available to tailor your UN-LT system to meet your project requirements. omponents and Wheels
More informationAmphenol Amphenol Pcd
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems MIL-T-1714 Series I lass MIL-T-1714 Series I unction Modules QPL-approved MIL-T-1714
More informationAttachment Chain ATTACHMENT SPACING GUIDE
GUIDE Attachment Chain HKK attachment chains are stanar AI single an ouble pitch chains with moifie sie plates or pins. Attachments may be use for a variety of purposes such as conveying, timing, or alignment.
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationLIGHTNIN CLASSIC Clamp-Mount and Fixed-Mount Mixers
LIGTNIN CLASSIC Clamp-ount and Fixed-ount ixers Proven performance. Guaranteed results. YOU AN LIGTNIN. TE RIGT IX. aximum Performance in igh Flow and igh shear Applications. anufacturing and processing
More informationHELICAL BEVEL DRIVES K-1
ELIAL EVEL RIVES K elical evel Product eatures...k2 to K3 Selection Procedure... K4 to K5 escriptions... K6 Mounting Positions... K7 Model Selection Index... K8 Selection y Input P... K9 to K21 Integral
More informationPlanetary Servo-reducer. SRP Range. The Machine Tool Drives Company
Planetary Servoreucer SRP Range The Machine Tool Drives Company 1 Range Overview SRP Planetary Servoreucer Versatile Drive solution Hightech planetary reucer + universal flange : multiuse solution Flexibility,
More informationPneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke
Bonesi Series Pneumatic Cylinders VMA 24562 ISO 6431 SERIES CX Light alloy end caps painted gray. Clean profile aluminium body gauged inside and outside. Bore size 32-40-50-63-80-100-125 Available with
More information