ITT. CentriPro Fiberglass Basins, Covers, Hatches, Access Doors and Accessories. CentriPro. Engineered for life BCBASIN R4. Wastewater.

Transcription

1 CASIN R4 ITT CentriPro Fiberglass asins, Covers, Hatches, Access oors and Accessories CentriPro is a brand of ITT Corporation. CentriPro Features Fiberglass asins - heavy duty construction, standard sizes to 72" ia. and 96" eep, custom basins to 20' deep available by quote request. Solid Covers - Fiberglass and steel available Simplex Covers - Fiberglass and steel available uplex Covers - Fiberglass and steel available Hatch Covers - Steel, single and double door Access oors - Aluminum, single and double door, standard and heavy duty Pipe Grommets - Use for Inlet or ischarge Connections ischarge Hubs - Cast iron caulking type and NPT Threaded Float Switch rackets - several models to choose from Junction oxes - boxes and cord grips Cord Grips - designed to be installed in fiberglass covers Cord Seals - seal around electric cord entry holes Engineered for life

2 asins imensional ata Approx. Weight (lbs.) Order Options Total Gallons Fiberglass with with No. 1 A C Gallons Per Standard "F" "S" Inch asin suffix suffix A A F or S A A7-2472F NA A7-2484F S NA A7-2496F NA A A F or S A A7-3072F NA A7-3084F S NA A7-3096F NA A A F or S A A7-3672F NA A7-3684F S NA A7-3696F NA A F or S A A7-4272F NA A7-4284F S NA A7-4296F NA A F or S A A7-4872F NA A7-4884F NA A7-4896F NA A7-6078F NA A7-6084F S NA A7-6096F NA A7-7278F NA A7-7284F NA A7-7296F NA An "F" suffix = fiberglass and "S" = steel anti-floatation collar. asins are not predrilled for inlet and discharge hubs. imensions and weights are based on Topp Industries, Inc. specifications. Standard Features Heavy duty fiberglass construction with 3 16" wall thickness (minimum). esigned to withstand hydrostatic pressure of 120 lbs. per cu. ft. Maximum fluid temperature: 140 F (60 C). Standard sizes: 24" 72" diameter. 36" 96" deep. Fiberglass anti-flotation collars are standard on models with an F suffix on the order number. asins are not factory drilled for inlet or discharge hubs. Options Optional sizes with depths to 20 are available: contact Customer Service for price quote and availability. Steel anti-flotation collars (denoted by S suffix) are available: contact Customer Service for price quote and availability. Inlet hubs and inlet grommets order separately, see chart on this bulletin. ischarge hubs order separately, see chart on this bulletin. Add an "F" suffix to order an optional fiberglass anti-floatation collar. Add an "S" suffix to order an optional steel anti-floatation collar. This requires a price quote from customer service. Note: Fiberglass and steel anti-floatation collars are molded as an integral part of the basin (built-in) and not something that can be added in the field. Optional Suffix - Mounting studs for slide rails available as custom. SMS = Simplex Studs MS = uplex Studs 2

3 Solid fiberglass cover Heavy duty fiberglass construction. Construction provides corrosion resistant gas tight design. Unique flange connection allows superior sealing capability. Light weight for easy installation. Available in 24" through 48" diameters. Optional float switch cord grips available (see basin accessories). imensional data Solid Steel cover Heavy duty steel construction. lack epoxy coating is applied to each cover. Available in 24" through 48" diameters. Optional float switch cord grips available (see basin accessories). imensional data Order No. A C asin Inside Cover Outside Cover olt Material ia. ia. Circle Thickness A8-24F A8-30F A8-36F A8-42F A8-48F Order No. (All dimensions are in inches and weights in lbs. o not use for construction purposes.) A C asin Inside Cover Outside Cover olt Material ia. ia. Circle Thickness A8-24T A8-30T A8-36T A8-42T A8-48T ASIN IMENSION RAWING A + 6" A 6 EA. 3 8" - 16 TAPPE METAL INSERTS ON OLT CIRCLE COVER IMENSION RAWING Stainless Steel Hardware Standard Gasket Tape Provided C 60 TYP A 30 TYP Fiberglass antifloatation collar (where used). (6) 1 2" IA. HOLES C C + 6" 3

4 Simplex Fiberglass pump cover Heavy duty fiberglass construction. Construction provides corrosion resistant gas tight design. Unique flange connection allows superior sealing capability. Light weight for easy installation. Pump access and switch inspection plates furnished as standard. Available in 24" through 48" diameters. Optional float switch cord grips available (see basin accessories). STAINLESS STEEL HARWARE STANAR GASKET TAPE PROVIE VENT 2" Standard H K Specify Size: 1.25", 1.5", 2", 3" or 4" A E F C ISCHARGE 2" Standard Specify Size: 1.25", 1.5", 2", 3" or 4" J Simplex Steel pump cover Heavy duty steel construction. lack epoxy coating is applied to each cover. Pump access and switch inspection plates furnished as standard. Available in 24" through 48" diameters. Optional float switch cord grips available (see basin accessories). 10" INSPECTION PLATE WITH 8" IA. CLEAR ACCESS OPENING 5" 5" ELECTRIC COR SEAL Use for cords up to 3 8". SIMPLEX FIERGLASS PUMP COVER IMENSIONAL ATA A C E F Order Cover Cover Cover Cover Access Clear G H J K No. Inside Outside olt Thickness Plate Access istance istance istance istance im. im. Circle im. im. A8-24FS NA A8-30FS NA A8-36FS NA SIMPLEX STEEL PUMP COVER IMENSIONAL ATA A C E F Order Cover Cover Cover Cover Access Clear G H J K No. Inside Outside olt Thickness Plate Access istance istance istance istance im. im. Circle im. im. A8-24TS NA A8-30TS NA A8-36TS NA A8-42TS NA A8-48TS NA A8-60TS NA (All dimensions are in inches and weights in lbs. o not use for construction purposes.) 4

5 Uplex Fiberglass pump cover Heavy duty fiberglass construction. Construction provides corrosion resistant gas tight design. Unique flange connection allows superior sealing capability. Light weight for easy installation. Two pump access and one switch inspection plate furnished as standard. Available in 30" through 36" diameters. Optional float switch cord grips available (see asin Accessories). STAINLESS STEEL HARWARE STANAR GASKET TAPE PROVIE 5" 5" VENT Specify Size: 1.25", 1.5", 2", 3" or 4" SEE PRICE OOK A H TYP. E F C ELECTRIC COR SEAL Use for cords up to 3 8". J Uplex Steel pump cover Heavy duty steel construction. lack epoxy coating is applied to each cover. Two pump access and one switch inspection plate furnished as standard. Available in 24" through 48" diameters. Optional float switch cord grips available (see asin Accessories). ISCHARGE Specify Size: 1.25", 1.5", 2", 3" or 4" SEE PRICE OOK 10" INSPECTION PLATE WITH 8" IA. CLEAR ACCESS OPENING G UPLEX FIERGLASS PUMP COVER IMENSIONAL ATA A C E F Order asin Cover olt Cover Access Clear G H J No. Inside Outside Circle Thickness Plate Access istance istance istance im. im. im. im. A8-30F A8-36F UPLEX STEEL PUMP COVER IMENSIONAL ATA A C E F Order asin Cover olt Cover Access Clear G H J No. Inside Outside Circle Thickness Plate Access istance istance istance im. im. im. im. A8-30T A8-36T A8-42T A8-48T A8-60T A8-72T (All dimensions are in inches and weights in lbs. o not use for construction purposes.) 5

6 Single oor Steel Hatch cover Heavy duty steel construction. lack epoxy coating is applied to each cover. Single door design provides large opening for easy access to pump and controls. Available in 30" through 42" diameters. ouble oor Steel Hatch cover Heavy duty steel construction. lack epoxy coating is applied to each cover. ouble door design provides easy access to pump and controls. Available in 48" through 72" diameters. Single oor Steel Hatch cover IMENSIONAL ATA A C E F G H Order asin Cover Cover Cover Hatch Hatch Clear Clear J No. Inside Outside olt Thickness oor oor Access Access ist. imension imension Circle Width Length Width Length A8-30H A8-36H A8-42H ouble oor Steel Hatch cover IMENSIONAL ATA A C E F G H Order asin Cover Cover Cover Hatch Hatch Clear Clear No. Inside Outside olt Thickness oor oor Access Access imension imension Circle Width Length Width Length A8-48H A8-60H A8-72H (All dimensions are in inches and weights in lbs. o not use for construction purposes.) STAINLESS STEEL HARWARE STANAR GASKET TAPE PROVIE E G A C ISCHARGE (optional) Specify Size: 1.25", 1.5", 2", 3" or 4" VENT Specify Size: 1.25", 1.5", 2", 3" or 4" E TYP. G TYP. A C STEEL ANGLE 10" INSPECTION PLATE WITH 8" IA. CLEAR ACCESS OPENING (optional) J H VENT Specify Size: 1.25", 1.5", 2", 3" or 4" Specify Type: F olt-down flange or grommet 6 STEEL ANGLE H F TYP. TYP. Aluminum covers available call for quote.

7 Access oors Features All Aluminum Construction: Frames and doors are 1 4" thick, one-piece extruded construction. Concrete anchors are included. Stainless Steel Hardware: Hinges, and all tamper-proof fasteners are 400 series stainless steel. oor Panels: iamond plate design, opens to 90º and locks automatically in that position. Stainless steel locking arm and release handle supplied as standard equipment. Additional Features: Standard stainless steel handle, locking bar and snap-lock with removable key handle. Custom esigns Available: Contact your distributor with your requirements. Order No. Size Construction A " x 30" A " x 48" A " x 48" Single oor A " x 48" ouble A " x 54" oor AH " x 48" Single AH " x 48" oor AH " x 48" ouble oor Standard uty 150 lb./sq. ft. Load Rated * Heavy uty (H-20) * oors are reinforced for wheel loadings encountered in off-road areas, driveways, or parking lots where traffic is limited to slow moving vehicles. oors are not designed to be installed in areas of high volume, fast moving, stop and go traffic. imensions are not the same as standard duty doors. Contact factory for dimensions. 7

8 Access oors imensions and weights SINGLE OOR OULE OOR 3" 3" LIFTING HANLE PALOCK LOCKING AR 1 4" X 2" ALUM. PLATE REINF. 1 4" THICK IAMON PAT. ALUM. COVER PLATE C OPENING OVERALL 1 4" X 2" ALUM. PLATE REINF. 1 4" THICK IAMON PAT. ALUM. COVER PLATE LIFTING HANLE C OPENING OVERALL 3" A OPENING 3" OVERALL 3" 3" 3" 3" A OPENING OVERALL PALOCK LOCKING AR A OPENING * These doors have a 3 4" lip around the bottom of the frame. This lip must be taken into account when drymounting the door in a pre-cut hole. 1 4" X 1" ASTRAGAL A OPENING Model imensions Lift Ship No. A C Wt. (lbs.) Wt. (lbs.) A " 36" 30" 36" A " 36" 48" 54" A " 42" 48" 54" Model imensions Lift Ship No. A C Wt. (lbs.) Wt. (lbs.) A " 54" 48" 54" A " 54" 54" 60"

9 Pipe Grommets for all basins and covers Alcryn Thermoplastic can be used for basin inlet, discharge and vent connections. Thermoplastic Uniseal Inlet Grommet Order No. Pipe Size Required Hole iameter A8-2U 2" 3" A8-24U 2" 4" A8-3U 3" 4" A8-4U 4" 5" A8-4U 4" ouble Seal 5" A8-6U 6" Seal 7" 4", 6" And 8" cast iron inlet hubs for fiberglass basins Inlet Caulking Hubs Order No. escription A8-4 4" Cast Iron A8-6 6" Cast Iron A8-8 8" Cast Iron Mounting Holes For 5 16" Flat Head Screws PIPE GROMMET ETAIL Soap Pipe For Ease of Entry Chamfer Cast Iron Caulking Hub Seal - as required Tapered I.. Expands O.. to Seal asin Wall Nut & Washer Cord Grip for fiberglass basin covers Inspection plate modification (for level control[s]). Suffix No. No. of Cord Grips CG1 1 CG2 2 CG3 3 CG4 4 NOTE: Add above suffix number to Fiberglass asin Cover order number for installation at factory or order required quantity of CG-1 Grips for field installation. 1 2" NPT Cord Grip For Cord With O.. Range-157" -.354" 9

10 ischarge hubs for all basins Through basin wall, female NPT coupling. asin Wall A ia. NPT Coupling Seal-as required 12 Gauge Steel Plate imensional ata Model No. A A " 4" A " 4" A8-20 2" 4" A8-30 3" 6" A8-40 4" 6" Cord seal for all basin covers Specifications: Material: Alcryn Part No. A8CS iameter: 2.4" Thickness: 7 16" Cord Seal is designed to seal around electric cord entry holes of 2.0" to 1.25". A8CS Cord Seals are shipped for use in 2.0" entry holes. To modify the seal for smaller holes simply cut pie slices out until the diameter is 0.4" greater than the entry hole. CUT KNOCK-OUTS FOR EXTRA CORS TOP VIEW OTTOM VIEW SIE VIEW 10

11 FS1 Float Switch bracket Stainless Steel Float brackets T-type brackets are designed to keep multiple float switches organized within the basin. All brackets are made of Type 304 stainless steel and come with black cord snubbers to securely attach float cables. The T-shaped bracket styles are supplied with a mounting piece so that the bracket itself may be easily removed from the basin with the floats still attached. Order No. Type # Floats Material Includes FS1 Adjustable racket SS Cord Retainers FS4F T Type SS Cord Snubbers FS5F T Type SS Cord Snubbers FS6F T Type SS Cord Snubbers FS6AH Hook SS - FS4F FS5F Cord Snubbers FS6F FS6AH is a 6-float hook-type bracket. 11

12 Junction oxes NEMA 4X fiberglass enclosure. Cord grips supplied for pump and control wires. 2" conduit connection supplied. Consult factory for enclo sure types and options not listed. Part No. A8-1J Extra Cord Grip Connectors: CG1 up to 0.47 CG1J 0.38 to 0.75 A8-1J includes Type Cord Grips Cord Grips Inside ox up to to.75 imensions Quantity 3 1 6" x 7" x 2 7 8" External splice box UL Listed Type 6P, mounts outside the riser of an underground tank and is accessible from the surface. Makes it easier to install and maintain pump system wiring. It's out of the way of other pump system components. At-grade installation, eliminating unsightly aboveground splice boxes. Completely watertight, so ideal for wet conditions and high groundwater. ottom entry design, easier to keep conduit below minimum burial depth. Four cord grips, mounting hardware, cord grip plugs and wet location wire connectors. Order No. A8AG4 CentriPro CentriPro and the ITT Engineered locks Symbol are registered trademarks and tradenames of ITT Corporation. SPECIFICATIONS ARE SUJECT TO CHANGE WITHOUT NOTICE. CASIN R4 March, 2009 Copyright (c) 2009 ITT Corporation Engineered for life