Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
|
|
|
- Lizbeth Parrish
- 5 years ago
- Views:
Transcription
1 NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch conduit runs and 90 bends. Conduit bodies are suitable for use in Class I, Division 2 hazardous locations per NEC Section 501-4(B). Features Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Malleable iron suitable for use in concrete. For covers and gaskets, see Pages AB4 and AB5. Complete interchangeability with other manufacturers style 5 or 35 Conduit Bodies. Internal volume and maximum wire clearly marked on castings. Standard Materials Bodies: malleable iron Blank covers: malleable iron or steel Cover screws: stainless steel Gaskets: neoprene or composition fiber Standard Finishes Malleable iron bodies and covers: triple-coat (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat Stamp steel covers: zinc electroplated Options For additional corrosion protection, specify Hot Dip Galvanized: add suffix -G to Catalog Number. NEC/CEC Certifications and Compliances UL Standard: 514A, 514B UL Listed: E CSA Standard: C22.2 No. 18 CSA Certified: Suitable for wet locations when used with gasketed covers. Fed Spec: A-A NEMA: FB-1, FB-2.10 Illustrated Features Type LB Type T Type LB Type T 344
2 NEC/CEC Suitable for use in the following Max. Wire Fill C Hot Dip Galvanized Max. Wire Fill LB Hot Dip Galvanized 1/2 C-50 C-50G LB-50 LB-50G 3/4 (3) # 6AWG C-75 C-75G (3) # 6AWG LB-75 LB-75G 1 (3) # 4AWG C-100 C-100G (3) # 4AWG LB-100 LB-100G 1-1/4 (3) # 2AWG C-125 C-125G (3) # 2AWG LB-125 LB-125G 1-1/2 (3) # 1/0AWG C-150 C-150G (3) # 1/0AWG LB-150 LB-150G 2 (3) # 4/0AWG C-200 C-200G (3) # 4/0AWG LB-200 LB-200G 2-1/2 (3) 300MCM C-250 (3) 300MCM LB-250 LB-250G 3 (3) 300MCM C-300 (3) 300MCM LB-300 LB-300G 3-1/2 (3) 350MCM C-350 (3) 350MCM LB-350 LB-350G 4 (3) 350MCM C-400 (3) 350MCM LB-400 LB-400G Max. Wire Fill T Hot Dip Galvanized Max. Wire Fill TB Hot Dip Galvanized 1/2 T-50 T-50G TB-50 TB17-G 3/4 (3) # 6AWG T-75 T-75G (3) # 6AWG TB-75 TB27-G 1 (3) # 4AWG T-100 T-100G (3) # 4AWG TB-100 TB37-G 1-1/4 (3) # 2AWG T-125 T-125G (3) # 2AWG TB-125 TB47-G 1-1/2 (3) # 1AWG T-150 T-150G (3) # 1AWG TB-150 TB57-G 2 (3) # 2/0AWG T-200 T-200G (3) # 2/0AWG TB-200 TB67-G 2-1/2 (3) 300MCM T-250 T-250G (3) 300MCM 3 (3) 300MCM T-300 T-300G (3) 300MCM 3-1/2 (3) 350MCM T-350 T-350G (3) 350MCM 4 (3) 350MCM T-400 T-400G (3) 350MCM All 1/2 Max Wire Fill Calculations per the NEC - Annex C - Table C8. PVC coating available on select bodies. Add suffix -PVC to catalog number. 345
3 NEC/CEC Suitable for use in the following Max. Wire Fill LL Hot Dip Galvanized Max. Wire Fill LR Hot Dip Galvanized 1/2 LL-50 LL-50G LR-50 LR-50G 3/4 (3) # 6AWG LL-75 LL-75G (3) # 6AWG LR-75 LR-75G 1 (3) # 4AWG LL-100 LL-100G (3) # 4AWG LR-100 LR-100G 1-1/4 (3) # 2AWG LL-125 LL-125G (3) # 2AWG LR-125 LR-125G 1-1/2 (3) # 1/0AWG LL-150 LL-150G (3) # 1/0AWG LR-150 LR-150G 2 (3) # 4/0AWG LL-200 LL-200G (3) # 4/0AWG LR-200 LR-200G 2-1/2 (3) 300MCM LL-250 (3) 300MCM LR (3) 350MCM LL-300 (3) 350MCM LR /2 (3) 350MCM LL-350 (3) 350MCM LR (3) 350MCM LL-400 (3) 350MCM LR-400 Max. Wire Fill X Hot Dip Galvanized 1/2 X-50 X-50G 3/4 (3) # 6AWG X-75 X-75G 1 (3) # 4AWG X-100 X-100G 1-1/4 (3) # 4AWG X-125 X-125G 1-1/2 (3) 1/0 X-150 X-150G 2 (3) 2/0 X-200 X-200G 2-1/ /2 4 All 1/2 Max Wire Fill Calculations per the NEC - Annex C - Table C8. PVC coating available on select bodies. Add suffix -PVC to catalog number. 346
4 NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch conduit runs and 90 bends. Conduit bodies are suitable for use in Class I, Division 2 hazardous locations per NEC Section 501-4(B). Features Tapered threaded hubs (NPT). Packaged complete under one Catalog Number. Ready to use Standard Materials Bodies: malleable iron Cover - Type BS steel Gasket - Type SGN neoprene Standard Finishes Malleable iron bodies and covers: triple-coat (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat Covers: zinc electroplated NEC/CEC Certifications and Compliances UL Standard: 514A UL Listed: E CSA Standard: C22.2 No. 18 CSA Certified: Suitable for wet locations when used with gasketed covers. Fed Spec: A-A NEMA: FB-1, FB-2.10 Illustrated Features Type T-CG Type LL-CG Type LR-CG Type C-CG Type LB-CG 347
5 NEC/CEC Suitable for use in the following C-CG LB-CG T-CG Max. Wire Fill Catalog Number Max. Wire Fill Catalog Number Max. Wire Fill Catalog Number 1/2 C-50CG LB-50CG T-50CG 3/4 (3) # 6AWG C-75CG (3) # 6AWG LB-75CG (3) # 6AWG T-75CG 1 (3) # 4AWG C-100CG (3) # 4AWG LB-100CG (3) # 4AWG T-100CG 1-1/4 (3) # 2AWG C-125CG (3) # 2AWG LB-125CG (3) # 2AWG T-125CG 1-1/2 (3) # 1/0AWG C-150CG (3) # 1/0AWG LB-150CG (3) # 1AWG T-150CG 2 (3) # 4/0AWG C-200CG (3) # 4/0AWG LB-200CG (3) # 2/0AWG T-200CG LL-CG LR-CG Max. Wire Fill Catalog Number Max. Wire Fill Catalog Number 1/2 LL-50CG LR-50 3/4 (3) # 6AWG LL-75CG (3) # 6AWG LR-75 1 (3) # 4AWG LL-100CG (3) # 4AWG LR /4 (3) # 2AWG LL-125CG (3) # 2AWG LR /2 (3) # 1/0AWG LL-150CG (3) # 1/0AWG LR (3) # 4/0AWG LL-200CG (3) # 4/0AWG LR-200 All 1/2 Max Wire Fill Calculations per the NEC - Annex C - Table C8. PVC coating available on select bodies. Add suffix -PVC to catalog number. 348
6 NEC/CEC Suitable for use in the following Wiring Capacity: Combine Body and Cover Capacities for Total Usable Capacity per NEC (A) Hub Capacity (dm 3 /in 3 ) C E LB LL & LR LRL T TA TB X Stamped Cover Cast Cover 1/ / / / / / /4 0.12/ / 0.12/ / / / / / / / / / 0.20/ / / / / / / / /4 0.57/ / 0.53/ / / / / / / /2 0.58/ / 0.58/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
7 For Spec 5 Conduit Outlet Bodies. NEC/CEC Suitable for use in the following Blank Covers and Gaskets Body Domed Top Design Cover Flat Top Design Cover Velbuna Solid Cover Sealing Gasket Neoprene 1/2 BS-50S BC-50G SG-50 SGN-50 3/4 BS-75S BC-75G SG-75 SGN-75 1 BS-100S BC-100G SG-100 SGN /4-1-1/2 BS-125S BC-125G SG-125 SGN BS-200S BC-200G SG-200 SGN /2-3 BS-250S BC-250G SG-250 SGN /2-4 BS-350S BC-350G SG-350 SGN-350 Flat Top Design Cover 350
8 NEC/CEC Suitable for use in the following Threaded Type Dimensions in Millimeters Types A, C, TA, TB Types E, LB, LL, LR, LRL Types T, X Hub A B C D E F G H J K L M N P 1/2 3/ /4 1-1/ / / (3.94) (5.38) (7.19) (7.19) (9.50) (12.25) (12.25) (14.88) (14.88) (18.25) (23.00) 33.3 (1.31) 39.6 (1.56) 46.0 (1.81) 63.5 (2.50) 63.5 (2.50) 79.5 (3.13) (4.31) (4.31) (5.50) (5.50) (7.25) (8.63) 36.6 (1.44) 42.9 (1.69) 49.3 (1.94) 65.0 (2.56) 69.9 (2.75) 98.6 (3.88) (5.19) (5.56) (7.00) (8.69) (5.38) (6.06) (7.13) (9.19) (9.19) (11.63) (15.13) (15.13) (18.13) (18.13) 68.3 (2.69) 73.2 (2.88) (4.50) (4.50) (5.25) 55.6 (2.19) 65.0 (2.56) 88.9 (3.50) 88.9 (3.50) (4.19) (5.75) (5.75) (7.13) (7.13) 54.1 (2.13) 58.7 (2.31) 68.3 (2.69) 90.4 (3.56) 95.3 (3.75) (5.25) (6.00) (6.81) (7.19) (9.00) (10.69) (3.94) (4.44) (5.13) (7.06) (6.81) (8.94) (11.88) (11.56) (14.00) (13.75) (16.88) (21.06) (5.38) (6.25) (8.19) (8.19) (10.56) (13.69) (13.69) (16.50) (16.50) (20.25) (25.00) 44.5 (1.75) 57.2 (2.25) 65.0 (2.56) 69.9 (2.75) 98.6 (3.88) (5.19) (5.56) 16.0 (0.63) 19.1 (0.75) 23.9 (0.94) 30.2 (1.19) 35.1 (1.38) 41.4 (1.63) 46.0 (1.81) 55.6 (2.19) 63.5 (2.50) 69.9 (2.75) (3.94) 30.2 (1.19) 35.1 (1.38) 42.9 (1.69) 60.5 (2.38) 74.7 (2.94) (4.13) (4.75) (5.13) (6.50) (7.56) 80.3 (3.16) 96.0 (3.78) (4.53) (6.00) (6.00) (8.06) (10.63) (10.63) (13.13) (13.13) (16.25) (21.00) 25.4 (1.00) 31.0 (1.22) 37.3 (1.47) 65.0 (2.56) 93.7 (3.69) 93.7 (3.69) (4.88) (4.88) (6.50) (7.81) 351
Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications
Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets
1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
BUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight
380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
Rigid/Aluminum Conduit Bodies, Gaskets and Covers
Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
CONDUIT BODIES CONDUIT BODIES. Phone:
i i Con it Bo ies allea le I on o i i I C con it cond ctors or p llin splicin Tapered threaded hu s - NPT Suita le or use in concrete Threaded LB Conduit Bodies MLB1 1/2 4-11/16 1-5/16 2-1/16 70 70.6 MLB2
Product Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
CONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and
Conduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
Corrosion Protection for Electrical Conduit and Fittings
Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat
Applications. Separate sealing chamber and switch construction. Used on 20 Amp 4-way and all 30 Amp models.
Contender Series Factory Sealed Front Operated Tumbler Switches Malleable Iron Body and Cover. Furnished with Internal Ground. NEMA 3, 7CD, 9EFG Applications Designed to prevent arcing of enclosed switches
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect
Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect
Junction Boxes Hazardous and Non-Hazardous
Junction Boxes Hazardous and Non-Hazardous Description Page No. Application/Selection 112 Boxes Flush EGJ Series 19 WJBF Recessed Sidewalk Cover Series 116 Service Station EGJ Series 19 GUA Series 17 GUP
D2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in
Division 2 Contender Series Factory Sealed Control Stations
NEMA 3, 3R, 4, 4X, 12 IP66 Applications For use in washdown areas and other damp, wet and highly corrosive areas. Push buttons and selector switches are used in conjunction with contactors or magnetic
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...
SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6
Condulet Single Gang Cast Device Boxes With and Without Mounting Lugs for Threaded Rigid and IMC Conduit
Condulet Single Gang Cast Accessories Pages to 44 F Application: Cast device boxes are installed to: accommodate wiring devices act as pull boxes for conductors in a conduit system provide openings to
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material.
Myers Hubs Class I, Div. 2 Class II, Div. 1 and 2 Class III when installed in accordance with the NEC. CP Myers Scru-tite TM and Ground hub are used in the termination of electrical circuits through wall
XP Series Pre-Wired Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof System
NEC/ Applications Protection and control of electrical apparatus and circuits in hazardous environments, either indoor or outdoor. Designed for Class I, Division 2 areas where flammable gases or vapors
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
Enclosures. Section E
Enclosures Section E Enclosures and junction boxes built and configured to meet the requirements of the most demanding hazardous areas and industrial environmental applications across the globe. E Enclosures
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
Contender Series Factory Sealed Control Stations and Pilot Lights Explosionproof, Dust-Ignitionproof Furnished with Internal Ground Screw.
Contender Series Factory Sealed Control Stations and Pilot Lights Furnished with Internal Ground Screw. Applications Push buttons and selector switches are used in conjunction with contactors or magnetic
Condulet Cast Device Boxes and Covers Application and Selection
F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit
Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
Condulet Conduit Bodies and Outlet Boxes Hazardous
Condulet Conduit Bodies and Outlet Boxes Hazardous 4F Description Page No. Application/Selection 48, 49 Lubricants HTL 59 STL 59 Conduit Bodies & Outlet Boxes Cylindrical EKC 57 90 Elbow LBH 58 LBY 58
W-Series Junction Boxes
W-Series Junction Boxes Application and Selection Junction boxes, designed for hazardous and non-hazardous locations, are used in a variety of industries to perform the following functions: As a pull box
ALUMINUM OUTLET BODIES
KILLARK GEB SERIES ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X Applications GEB series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
EDS Factory Sealed Tumbler Switches UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D NEMA 7 B CD, 9EFG Applications Designed to prevent arcing of enclosed switches
Commercial Products. New Products in the Commercial Products Product Line
Commercial Products Section A complete solution combining reliability and expertise in every product, providing you with labor and maintenance savings, simplified installation, and improved productivity
Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Controls CONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SWITCHES
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Explosion Proof & Hazardous Area Junction Boxes
CSA - Class I Div. 1 - Groups C & D * CSA - Class I Zone 1 - Groups IIA, IIB * * Applies to GUI boxes only Explosion Proof & Hazardous Area Junction Boxes Features: Heavy-duty copper free (below 0.04%)
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems
Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS. Application
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS
Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
Taxonomies, Classifications, and Categories MYER'S HUB, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTORS
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 NTCC125 1-1/4" Rigid Threadless Raintight Coupling ppleton/oz Gedney Manufacturer Description Weight per unit Product
Kruppsconduit. Metal Raceway Product Range
Kruppsconduit Metal Raceway Product Range CONDUITS (BS4568 & BS31) Index Kruppsconduit 1-10 EMT Conduit 11-25 Rigid Steel Conduit 25-46 PVC Coated Rigid Conduit 47-71 Flexible Conduit System 72-94 CONDUITS
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers Mulberry Outlet Box Covers New in this catalog: A full line of die-cast, powder painted conduit bodies: 1/2-4, threaded
ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
Bulletin 1494V Variable-Depth Flange-Mounted Circuit Breaker Operating Mechanism
Bulletin V Variable-Depth Flange-Mounted Circuit Breakers Product Overview/Product Selection Circuit Breaker Kits Cat. No. V-C Circuit Breaker Kit (Shown without handle and connecting rod) Bulletin V Variable-Depth
Cable and Cord Fittings Hazardous and Non-Hazardous
Cable and Cord Fittings Hazardous and Non-Hazardous 5F Description Page No. Description Page No. Application/Selection 62, 63 Cable/Conduit Sealing Devices Thru-Wall Barrier TW Series 101-106 Link Seal
Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box
1 TECHNICAL DATA SHEET Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box XPCJ series series of explosionproof aluminum enclosures are typically used in the packaging of electrical/electronic
Lighting and Power Distribution Panelboards
EXPLOSIONPROOf Lighting and Power Distribution Panelboards The design offers sufficient gutter space on sides to allow through wiring and easy lug connection. All enclosures are furnished with hinges,
GHG43 Series Control Stations
GHG43 Series Control Stations Nonmetallic or 316L Stainless Steel UL/cUL listed Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, (A) Ex de IIB + H2 T6 Cl. II, Div. 1, Groups E, F, G (cul) PTB ATEX
Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
Product Information. Receptacles and Plugs: Explosionproof For use with Threaded Metal Conduit. MD2SR Interlocked Switched Receptacle
L02-L12 01 Receptacles and Plugs: Explosionproof For use with Threaded Metal Conduit. Applications Locations where receptacle is used with stationary or portable electrically operated devices such as lighting
Thin Wall Conduit Fittings (For EMT Conduit)
Set Screw Type Fittings - Product of the USA FITTINGS To join EMT to a box or enclosure To couple two ends of EMT conduit Straight Connectors Non-Insulated Features: All connectors available with or without
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
Wire Mesh Safety Grips
Straight Male 90 Male Straight Female L7901 L7915 L7951 Liquid-Tight Grips U* R* Liquid-Tight Grips are woven stainless steel mesh with an anodized aluminum body for corrosion-resistance. They are used
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Premium industrial grade isolated ground straight blade receptacles
Technical Data Description 2-Pole, 3-Wire Grounding 15A 125V; 15A 250V 20A 125V; 20A 250V NEMA 5-15, 5-20, 6-15, 6-20 IG5261 AHIG5362 Design features Exclusive screw terminal guards provide fast, easy
DISTRIBUTION EQUIPMENT: NEC/CEC HAZARDOUS LOCATION SWITCHES. Application
- and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Application Explosionproof circuit breaker enclosures are
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
NEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. NEC EBR Receptacle:
Industrial grade L6-30 locking devices
Technical Data Industrial grade L6-30 locking devices Description AHL630P AHL630R AHL630C AHL630FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust and
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural
Applications: Myers Hubs are used in the termination of electrical circuits through wall of the enclosure Designed for use indoors or outdoors with rigid conduit and IMC Ideal for pharmaceutical, chemical
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for: