50 Hz Products. Commercial Duty Pumps Heavy Duty Solids Handling Pumps Grinder Pumps Lift Station Accessories. Trusted. Tested. Tough.

Size: px
Start display at page:

Download "50 Hz Products. Commercial Duty Pumps Heavy Duty Solids Handling Pumps Grinder Pumps Lift Station Accessories. Trusted. Tested. Tough."

Transcription

1 Hz Products Commercial Duty Pumps Heavy Duty Solids Handling Pumps Grinder Pumps Lift Station Accessories Trusted. Tested. Tough.

2 WHAT SETS ZOELLER PUMPS APART? Since 199, Zoeller Company has been manufacturing water pumps of many types. From pedestal pumps in the beginning to large HP, submersible, non-clog pumps in recent years, we have gained invaluable manufacturing experience from our humble beginning in August Zoeller s basement workshop. Over the years, one of our most important mottos has been, We excel at 1, little things. From start to finish, we take pride in our products. When you have residential or commercial wastewater issues, you can count on Zoeller to deliver the very best solutions. Our commitment to unsurpassed quality offers years of service and durability with a responsive and knowledgeable product support team just a phone call away. MANUFACTURING IS IN OUR BLOOD Rather than using a puzzle piece mentality and simply buying components from other sources and assembling them, we manufacture most of our products from start to finish, continually checking the quality throughout the entire process. Quality is always the most important element at Zoeller. Above all, quality is what has made us successful and continues to drive the decisions we make. A quality product cannot be manufactured with low-grade components. By bringing in high-quality raw castings as well as machining and powder coating the pieces in house, we are able to control the quality of each part and identify any defect throughout the manufacturing process. Each piece is subjected to numerous quality checkpoints along the way to guarantee that it is the best of the best. FACTORY TESTING IS NOT JUST A BUZZWORD Instead of running audits on a calculated number of pumps, all submersible Zoeller pumps are 1% factory tested underwater prior to shipment. Each pump is subjected to a leak test to ensure that all gaskets, seals and mating surfaces will hold under pressure. After the pressurized leak test, the pump is powered up and run underwater to ensure that it is capable of the published head capacity and flow rate listed in our catalog and specification sheets. This testing allows us to guarantee the pump will operate out of the box every time, and you can rest assured that YOUR Zoeller pump was tested underwater for both electrical and hydraulic performance. FULL BREADTH OF PRODUCT LINE Zoeller is your one stop shop when dealing with dewatering and wastewater systems. We offer everything from a small fractional sump pump to a large, 1 HP, non-clog pump. From battery back-ups, check valves, sewage grinder systems, small prepackaged residential units or large prepackaged municipal systems, Zoeller can offer it all. Next time you are looking for a water or wastewater system, reach for the only catalog you will ever need Zoeller Company! All rights reserved. ZOELLER CO zoellerengprod.com

3 Product Index COMMERCIAL DUTY PUMPS 616, 61 Series , 69 Series... - HEAVY DUTY SOLIDS-HANDLING PUMPS 61 HD Series HD Series GRINDER PUMPS 7 Series Series LIFT STATION ACCESSORIES...1 GUIDE RAIL SYSTEMS...1 All rights reserved. ZOELLER CO zoellerengprod.com

4 Commercial Duty Pumps COMMERCIAL EFFLUENT AND SEWAGE EJECTORS, KW APPLICATIONS: Pump stations Housing developments Pressure sewers FEATURES: support legs for free standing applications Stainless steel lifting bail construction with corrosion-resistant, baked-on epoxy powder coating 1% computer tested OPTIONAL: 616, 61 Series , 69 Series Moisture sensors Silicon carbide seals Additonal cord lengths available in 11 m (') or 1 m (') Single phase models available with a type E/F ( or 1 m), G ( or 1 m) or I ( m) plug (except 619 and 69) CE rated models available with a 1 m (' ) cord and no molded plug. s 6161, 616, 616, 616 Motor Weight Double Kg. Lbs. V6161 Non AK6161 Non V616 Non AK616 Non V616 Non AK616 Non V616 Non AK616 Non Double s 61, Motor Kg. Weight Lbs. V61 Non AK61 Non V619 Non AK619 Non PUMP MOTOR Pump Housing Shaft and Gasket Power Cord Bearings Solid Passing Power Cord Length Motor Housing Type Bronze Material Silicon carbide/carbon lower, carbon/ceramic upper Viton SOOW (H7RN for CE models) Design Features Non-clogging vortex Ball bearing upper/lower 19 mm (/") spherical solids - 616, 61 series mm (") spherical solids - 6, 69 series m (') Standard RPM or 1 Permanent split capacitor or Ph Insulation Class B; F - 619, 69 Motor Protection Protection Class Cooling Maximum Fluid Temperature Discharge Size Hardware Auto reset thermal overload (1 Ph) IPX Oil filled C (1 F) 1-1/" NPT, " NPT, or " NPT Stainless steel Double Motor Kg. Weight Lbs. V6 Non AK6 Non ZOELLER GREEN The color green is a registered trademark of Zoeller Pump Co. Double s 69, 69, 69 Motor Kg. Weight Lbs. V69 Non AK69 Non V69 Non AK69 Non V69 Non AK69 Non All rights reserved. ZOELLER CO zoellerengprod.com

5 Commercial Duty Pumps PUMP PERFORMANCE CURVES, KW 616 Series 61 Series m /hr L/sec 1 1 PUMP PERFORMANCE CURVE MODELS 6161/616/ 616/616 Hz FLOW RATE 11A m /hr L/sec 1 1 PUMP PERFORMANCE CURVE MODELS 61/619 Hz FLOW RATE 9 17A 6 Series PUMP PERFORMANCE CURVE MODEL 6 Hz m /hr L/sec FLOW RATE 11A 69 Series PUMP PERFORMANCE CURVE MODELS 69/69/69 Hz m /hr L/sec FLOW RATE 1A All rights reserved. ZOELLER CO zoellerengprod.com

6 Heavy Duty Solids-Handling Pumps 61 HD SERIES,.6 -. KW APPLICATIONS: Engineered lift stations Storm water removal Wastewater transfer Industrial wastewater FEATURES: construction with corrosion-resistant, baked-on epoxy powder coating Thermal sensor and moisture detection system with upper and lower probes Individually sealed conductors to eliminate cord wicking of liquids Lifting lug integral part of housing Balanced concentric pump housing and impeller " NPT Vertical Discharge.6 -. ZEPA6C Flanged Horizontal Discharge,.6 -.,.6 -. ZEPA6B OPTIONAL: Silicon carbide seal(s) Bronze impeller Vortex impeller Trimmed impeller Dry pit configuration (.6-1. ) 76 mm ( ) solids capacity ( discharge only) Certified tests Additonal cord lengths available in 11 m (') or 1 m (') CE rated models available with a 1 m (' ) cord 61 HD Series Double Motor Kg. Weight Lbs. AK61 Non AK611 Non AK61 Non AK61 Non AK61 Non AK61 Non AK6111 Non AK611 Non AK611 Non PUMP MOTOR Pump Housing Shaft and Gasket Power Cord Bearings Solid Passing Power Cord Length Motor Housing Type Ductile iron Material Silicon carbide/carbon lower, carbon/ceramic upper Buna-N #1- SO (H7RN for CE models) Design Features vane, semi-open with top pump-out vanes Ball bearing upper/lower 6 mm (-1/") spherical solids 7.6 m (') standard (1 m ['] on CE models) Ph RPM 1 or Insulation Class Motor Protection Protection Class Cooling Maximum Fluid Temperature Discharge Size Hardware F Thermal sensor with automatic reset IPX Oil filled C (1 F) " vertical or " or " horizontal flanged Stainless steel All rights reserved. ZOELLER CO zoellerengprod.com 6

7 Heavy Duty Solids-Handling Pumps PUMP PERFORMANCE CURVES,.6 -. KW 61 HD Series " and " horizontal flanged discharge semi-open impeller 61 HD Series " NPT vertical and horizontal flanged discharge semi-open impeller / (191 mm) DIA MODELS mm (.") SOLID PASSING Hz mm (-1/")DIA. MODELS mm (-1/") SOLID PASSING Hz (17 mm) DIA 6-/ (16 mm) DIA mm (-/")DIA. 111 mm (-/")DIA / (16 mm) DIA -/ (17 mm) DIA -7/ (1 mm) DIA. M 1. M FLOW PER MINUTE FLOW PER MINUTE AB A1B 61 HD Series " horizontal discharge semi-open impeller 1 MODELS mm ( ) SOLID PASSING Hz (17 mm) DIA 6-/ (171 mm) DIA 6-1/ (19 mm) DIA 7 6 -/ (1 mm) DIA. M 1-1/ (1 mm) DIA 1 -/ (11 mm) DIA FLOW PER MINUTE AB All rights reserved. ZOELLER CO zoellerengprod.com 7

8 Heavy Duty Solids-Handling Pumps 6 HD SERIES, KW APPLICATIONS: Engineered lift stations Storm water removal Wastewater transfer Industrial wastewater FEATURES: Protected cable entrance with compression grommet that allows for field replacement of cable Moisture-detection system with upper and lower probes Individually sealed conductors to eliminate cord wicking of liquids Lifting lug integral part of housing construction with corrosion-resistant, baked-on epoxy powder coating OPTIONAL: Silicon carbide seals Bronze impeller Vortex impeller Trimmed impeller Dry pit configuration High head unit (models 6, 6, 6 - available with " discharge) 6" discharge Additonal cord lengths available in 11 m (') or 1 m (') CE models include a 1 m (') cord Flanged Horizontal Discharge, , ZEPB7 Double 6 HD Series Motor Kg. Weight Lbs. AK6 Non.. 19 AK61 Non AK6 Non AK6 Non AK6 Non PUMP MOTOR Pump Housing Shaft and Gasket Power Cord Bearings Solid Passing Power Cord Length Motor Housing Type Ductile iron Material Silicon carbide/carbon lower, carbon/ceramic upper Buna-N #1- for s 6-6, #- for s 6-6 (H7RN-FG for CE models) Design Features vane, semi-open with top pump-out vanes Ball bearing upper/lower 7 mm (") spherical solids m (') standard Ph RPM 1 Insulation Class Motor Protection Protection Class Cooling Maximum Fluid Temperature Discharge Size Hardware F Thermal sensor with automatic reset IPX Oil filled C (1 F) " & 6" horizontal flanged Stainless steel All rights reserved. ZOELLER CO zoellerengprod.com

9 Heavy Duty Solids-Handling Pumps PUMP PERFORMANCE CURVES, KW 6 HD Series and 6 flanged discharge semi-open impeller 9. (1 mm) MODELS mm ( ) SOLIDS PASSING Hz.6 (19 mm) 7.7 (197 mm) 7. (17 mm) 6. (17 mm) A61 FLOW PER MINUTE 6 HD Series and 6 flanged discharge High head semi-open impeller 7 1." (6 mm) 9." (1 mm) MODELS mm ( ) SOLID PASSING Hz 6 1." (16 mm) 6 1 M / HR M FLOW PER MINUTE A619 6 HD Series flanged discharge vortex impeller 6 1 MODELS 6-6 VORTEX 7 mm (") SOLIDS PASSING Hz mm (1.") 6 mm (9.") 1 mm (.") 17 mm (7.") 1 M B617 FLOW All rights reserved. ZOELLER CO zoellerengprod.com 9

10 Grinder Pumps 7 SERIES GRINDER,. KW APPLICATIONS: Pump stations Housing developments Pressure sewers FEATURES: support legs for free-standing applications Stainless steel lifting bail Protective cutter ring helps extend cutter life construction with corrosion-resistant, baked-on epoxy powder coating Patented moisture-detection system with upper and lower probes Concentric pump housing with centerline discharge reduces radial loading OPTIONAL: Silicon carbide seals Trimmed impeller Bronze impeller (optional on 711) Certified tests Additonal cord lengths available in 11 m (') or 1 m (') CE rated models include a 1 m (') cord 7 Series / Vertical Discharge. PUMP PERFORMANCE CURVE MODELS 711/71/71 Hz FLOW A6_711, 71, ZEPA7 PUMP PERFORMANCE CURVES,. KW s 711, 71, 71 reversing and single direction 1 Double PUMP MOTOR Pump Housing Shaft and Gasket Power Cord Bearings Power Cord Length Motor Housing Type Material Ductile iron Bronze - 71, 71 Silicon carbide/carbon lower, carbon/ceramic upper Viton 1 AWG SOW (H7RN-FG1. for CE models) Design Features Non-clogging vortex Ball bearing upper/lower 6 m (') standard (1 m ['] on CE models) RPM Insulation Class Motor Protection Protection Class Cooling Maximum Fluid Temperature Discharge Size Hardware Ph and cap start/cap run for 1 Ph F Thermal overload with automatic reset (1 Ph) Thermal sensor with automatic reset ( Ph) IPX Oil filled C (1 F) 1-1/" NPT Motor Stainless steel Weight Cutter/Cutter Plate Stainless steel / Rockwell C-6 Kg. Lbs. V711 Non AK711 Non V71 Non AK71 Non V71 Non AK71 Non All rights reserved. ZOELLER CO zoellerengprod.com 1

11 Grinder Pumps MODEL 71 HP - PROGRESSIVE CAVITY GRINDER FEATURES: Progressive cavity grinder pump with a hardened, stainless steel cutter and cutter plate Stainless steel mounting stand for freestanding installation motor housing with powder coated epoxy finish Finned motor housing design provides great heat dissipation 1-1/" NPT and BSPT horizontal discharge Construction - Motor housing, cover, adapter and pump housing cast iron ASTM A-, Class,,# tensile strength, corrosion-resistant, powder coated epoxy finish Viton square rings and gasket Stainless steel cutter and plate hardened to Rockwell C -6 Pressure relief valve Stainless steel legs provide for free-standing installation Stainless steel helix hydraulic rotor Buna-N hydraulic stator V / 1 Ph, 1 RPM, HP Housing - Finned cast iron, oil-filled APPLICATIONS: Low pressure sewer systems High head sewage systems Residential and commercial OPTIONAL: Available with a CE rated 1m (') H7RN cord, sensor cord and no molded plug PUMP PERFORMANCE CURVE,. KW 71 Single Motor Weight HP kg. Lbs. Z71 Non PUMP PERFORMANCE CURVE MODEL 71 Hz CONSULT FACTORY FOR INTERMITTENT USE ABOVE 7 TOTAL DYNAMIC HEAD, MAXIMUM PUMP OUTPUT PUMP Pump Housing Shaft Bearings Power Cord Material Stainless steel Carbon and ceramic Neoprene High carbon chrome steel SOW/SOOW (CE model H7RN-F) Design Features Helical MOTOR Bearings Ball bearing upper/lower Power Cord Length 1 m (') standard Motor Housing Type Permanent split capacitor RPM 1 Rotor AISI 16 stainless steel Insulation Class B Motor Protection Auto reset thermal overload (1 Ph) m /hr L/sec FLOW RATE 191 Protection Class Cooling Maximum Fluid Temperature Discharge Size Max. Submersion Depth IP6 Oil filled C (1 F) 1-1/" NPT 6 m (') ZOELLER GREEN R Hardware Stainless steel Cutter/Cutter Plate C Stainless steel/rocell C -6 The color green is a registered trademark of Zoeller Pump Co. NSF / ANSI 6 All rights reserved. ZOELLER CO zoellerengprod.com 11

12 Grinder Pumps 71 SERIES GRINDER,. -. KW APPLICATIONS: Sewage lift stations Housing developments Low pressure sewer systems High vertical lift or long force mains FEATURES: Protected cable entrance with compression grommet that allows for field replacement of cable Individually sealed conductors for elimination of cord wicking liquids Lifting lug integral part of housing Thermal sensor and moisture detection system with upper and lower probes construction with corrosion-resistant, baked-on epoxy powder coating OPTIONAL: High Flow (HF) or High Head (HH) models Reversing (Rev) models ( Ph flanged models only) NPT vertical discharge (HH and HF Units only) Silicon carbide seals Trimmed impeller Certified tests Additonal cord lengths available in 1 m (') or m (7') CE rated models include a 1 m (') cord Flanged Horizontal Discharge -1/ adaptable to. -. ZEPAB Double 71 HD Series Motor Kg. Weight Lbs. AK711 Non AK7111 Non AK711 Non PUMP MOTOR Pump Housing Shaft and gasket Power Cord Bearings Power Cord Length Motor Housing Type Bronze Material Silicon carbide/carbon lower, carbon/ceramic upper Buna-N #1- SO (H7RN-FG for CE models) Design Features Non-cloggong vortex Ball bearing upper/lower 7.6 m (') Ph RPM Insulation Class Motor Protection Protection Class Cooling Maximum Fluid Temperature Discharge Size Hardware F Thermal sensor with automatic reset IPX Oil filled C (1 F) -1/" flanged horizontal adaptable to " or " NPT vertical Stainless steel Cutter/Cutter Plate Stainless steel/ Rockwell C-6 All rights reserved. ZOELLER CO zoellerengprod.com 1

13 Grinder Pumps PUMP PERFORMANCE CURVES,. -. KW Series High Head Grinder -1/ flanged discharge & " NPT.,.,. KW 11 mm (7-1/") DIA. HIGH HEAD MODELS HZ Series High Flow Grinder -1/ flanged discharge & " NPT.,.,. KW 71 SERIES REVERSING HZ mm (6-1/") DIA. 1 mm (-1/") DIA /" (16 mm) DIA. -1/" (1 mm) DIA. -/" (111 mm) DIA FLOW FLOW 7 A6 A67 71 Series Reversing Grinder -1/ flanged discharge.,.,. KW HIGH FLOW MODELS HZ mm (6")DIA mm (-1/") DIA. 1 1 mm (-1/") DIA FLOW A67 All rights reserved. ZOELLER CO zoellerengprod.com 1

14 Lift Station Accessories Standard Control Panel Features: Simplex and duplex configurations NEMA X outdoor rating Lockable hasp Pump disconnect Motor contactor 11 Volt control circuit Pilot lights and selection switches High water alarm circuits with dry contacts leak indication Thermal cut-out circuit Reversing circuits for 711 and 71 Series Reversing Grinder pumps Options: Inner door Elapsed time meter(s) Event counter(s) Alarm flasher Lightning arrestor/surge suppressor Anti-condensation heater Redundant off circuit UR C L US LISTED Custom panel designs available by request 1-1/" - " Threaded Full-Flow Unichecks Vertical or horizontal installation Full flow design - no restrictions Standard, 1-1/", 1-1/", ", " female NPT pipe Neoprene polyester reinforced flapper - smooth edge design with cast iron, non-corrosive metal backing plates and stainless steel fastener Rated at kpa ( PSI) ( m [11'] of head) at C (1 F) body and stainless steel bolts Corrosion-resistant, powder coated epoxy finish -1/" - " Flanged Check Valves for Sewage or Dewatering Applications Heavy-duty cast iron construction Angled seal for non-slam closure Non-clog design Reinforced disc Drip-tight seating Rated up to psig Designed for both horizontal and vertical use 1-1/" - " PVC BALL VALVES General purpose ball valve Ideal for a variety of applications 1 PSI Rated " - " Cast Iron Plug Valves Threaded Connection - " and " Flanged Connection - -1/", ", ", 6", " Designed to handle solids-bearing flows housing - rated 1,7 kpa (17 PSI) 99% pure nickel welded seat 1/ turn Buna plug Upper and lower ball bearings Provided with hand lever 1-1/" & " BRONZE CHECK VALVES All bronze construction Metal to metal seals 1 PSI rated Vertical or horizontal installation Stops back flow of water Suitable for installation below basin cover 1-1/" & " BRONZE BALL VALVES All bronze construction 1 PSI rated Z-Rail Disconnect System (1-1/", 1-1/", ") construction with corrosion-resistant, baked-on epoxy powder coating Robust construction, designed to support a 16 kg ( lb.) pump Provides for an easy pump install or removal operation with no need for personnel to enter basin Compact design for small spaces Adaptable to most 1-1/, 1-1/ and pumps with a vertical NPT discharge 1-1/" horizontal NPT discharge available for progressing cavity grinder pumps Grooved, machined fit for a positive seated rail plate O-ring seals prevent leakage Uses /" IPS guide rails Intermediate stabilizer for pits over.7 m (1') deep Tested to seat at heads up to 1,1 kpa (16 PSI) ( 11 m [7'] TDH) UPPER RAIL SUPPORT GUIDE RAIL (NOT INCLUDED) GUIDE RAIL PLATE ELBOW THREADED MALE CONNECTION DISCONNECT ELBOW SK976 All rights reserved. ZOELLER CO zoellerengprod.com 1

15 R R O O T T A A T T I I O O N N Guide Rail Systems Guide Rail Systems (", " & 6" discharge) Automatic engagement and easy disengagement Ductile iron fittings (" vertical) or Class cast iron fittings (", " & 6" flanged) Enamel-coated (" vertical) or epoxy coated casting (", " & 6" flanged) discharge Supports pump Use /" IPS (" vertical) or " IPS (", " & 6" flanged) guide rails. Brass, stainless steel or galvanized steel pipes recommended (not furnished). Intermediate stabilizers for pits over.7 m (1') (" vertical) or.6 m (1') (", " & 6" flanged) deep Products may not be exactly as pictured " NPT Systems " & 6" Systems -1/" & " Horizontal Flanged ", " & 6" FLYGT Guide Rail System Adapters Adapter plates for retrofitting ", " & 6" horizontal discharge pumps to existing Flygt rail systems. construction Flange conforms to ANSI B16.1 fully flat/mss SP-6 For use with all pumps with ", " or 6" horizontal discharges and " NPT rail pipe Flange gasket and stainless steel bolts included CHOKER CABLE * *Not Included FLYGT GUIDE RAIL SYSTEM ADAPTER PLATE EXISTING FLYGT RAIL FITTING " X 6" Flanged Dry Pit Mounting Stand With Clean-Out Class epoxy coated cast iron construction 6" inlet / " outlet Flanges conform to ANSI B16.1 fully flat/ MSS SP-6 For use on Dry-Pit pumps with " discharge " clean out plug ZEPA9 ZEPA7 Engineered Lift Stations Factory assembled for job ready installation Built to specification and/or job requirements Fiberglass basins up to cm (96") diameter and 61 cm (") depth Steel and aluminum hatched access covers 7.6 m - 1. cm (" - 6") rail systems and discharge piping PVC, galvanized and stainless steel discharge piping Check valves and ball or plug valves Optional attached valve box HATCH COVER STEEL ALUMINUM GAS TIGHT JUNCTION BOX (OPTIONAL) HATCH COVER " VENT (OPTIONAL) " DISCHARGE PIPE ACCESS OPENING " X " LIFTING CABLE SS GALVANIZED ELECTRICAL CONDUIT SS CABLE BRACKET FIBERGLASS BASIN " CAST IRON INLET HUB SHUT-OFF VALVE LAG PUMP "ON" FLOAT ALARM FLOAT LEAD PUMP "ON" FLOAT DISCHARGE PIPE SIZE TYPE CAST IRON CHECK VALVE GUIDE RAILS LEAD PUMP "OFF" FLOAT RAIL SYSTEM SK7 ANTIFLOATATION RING: FIBERGLASS ENCAPSULATED STEEL FIBERGLASS NONE All rights reserved. ZOELLER CO zoellerengprod.com 1

16 ZM6_Eb 11 Supersedes Cane Run Road Louisville, KY zoellerengprod.com

SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS

SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649

More information

SPECIFICATIONS EFFLUENT/SUMP DUPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS

SPECIFICATIONS EFFLUENT/SUMP DUPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649

More information

SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS

SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347

More information

SPECIFICATIONS EFFLUENT/SUMP SIMPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS

SPECIFICATIONS EFFLUENT/SUMP SIMPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649

More information

50 Hz Products. Your Peace of Mind is Our Top Priority. Utility Pumps. Sump / Effluent Pumps. Sewage Pumps. Grinder Pumps. Specialty Products

50 Hz Products. Your Peace of Mind is Our Top Priority. Utility Pumps. Sump / Effluent Pumps. Sewage Pumps. Grinder Pumps. Specialty Products Hz Products Utility Pumps Sump / Effluent Pumps Sewage Pumps Grinder Pumps Specialty Products Accessories Controls Your Peace of Mind is Our Top Priority WHAT SETS ZOELLER S APART? Since 199, Zoeller Company

More information

XFL70 FLOW RATE (LPM) Flow Rate (GPM)

XFL70 FLOW RATE (LPM) Flow Rate (GPM) Pump Specifications XFL70 Series ¾ HP Submersible Effluent Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 50 XFL70 FLOW RATE (LPM) 0 50 100 150 200 250

More information

XLE50 FLOW RATE (LPM) Flow Rate (GPM)

XLE50 FLOW RATE (LPM) Flow Rate (GPM) Pump Specifications XLE50 Series ½ HP Submersible Sewage Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 25 XLE50 FLOW RATE (LPM) 0 100 200 300 400 500

More information

Pump Specifications LE100-Series 1HP Submersible Sewage Pump

Pump Specifications LE100-Series 1HP Submersible Sewage Pump Pump Specifications LE100-Series 1HP Submersible Sewage Pump LE100-P1 R8/5/2014 Copyright 2014 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE100-Series Dimensional

More information

GR NDER PUMPS. Technical Catalog

GR NDER PUMPS. Technical Catalog Technical Catalog GR NDER PUMPS U.S.A. 505 Woodland Rd., Mt. Pocono, PA 18344 Phone: (570) 851-0075 Fax: (570) 216-4570 www.grinderpumpsusa.com sales@grinderpumpsusa.com GRINDER PUMPS GPU2-21 1½ HP Grinder

More information

NOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump.

NOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump. Pump Specifications LEH100-Series 1HP Submersible Sewage Pump NOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump. LEH100-P1 R12/19/2012

More information

Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump

Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump LE40_P1 R8/17/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE40-Series

More information

Contents Project: Model: Chk d: Date:

Contents Project: Model: Chk d: Date: Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings

More information

GR NDER PUMPS. 505 Woodland Rd., Mt. Pocono, PA Phone: (570) Fax: (570)

GR NDER PUMPS. 505 Woodland Rd., Mt. Pocono, PA Phone: (570) Fax: (570) U.S.A. 505 Woodland Rd., Mt. Pocono, PA 18344 Phone: (570) 851-0075 Fax: (570) 216-4570 www.grinderpumpsusa.com sales@grinderpumpsusa.com GRINDER PUMPS GPU2-21 2 HP Grinder Pump 2 Piece Motor Housing

More information

Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump

Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R9/3/2013 Copyright 2013 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional

More information

Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump

Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional

More information

Pump Specifications. LE50 Series ½ HP Submersible Sewage Pump

Pump Specifications. LE50 Series ½ HP Submersible Sewage Pump Pump Specifications LE50 Series ½ HP Submersible Sewage Pump LE50_P1 R11/16/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE50-Series Dimensional

More information

MYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent

MYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent The Myers heavy-duty series pumps are designed for residential raw sewage and light commercial applications. The non-clogging two-vane impeller delivers high-efficiency pumping and easily handles trashy

More information

Pump Specifications FL50 Series 1/2 hp Submersible Effluent Pump

Pump Specifications FL50 Series 1/2 hp Submersible Effluent Pump Head (Feet) Head (Meters) Pump Specifications FL50 Series 1/2 hp Submersible Effluent Pump Flow (Liters Per Minute) 60 0 38 76 114 151 189 227 265 303 341 379 18 50 15 40 12 30 9 20 6 10 3 0 0 0 10 20

More information

LITERS PER MINUTE GALLONS PER MINUTE

LITERS PER MINUTE GALLONS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications D3684LSG, D3684LSGX Omnivore 2HP Duplex Grinder Packages LITERS PER MINUTE 200 190 180 170 160 150 140 130 0 50 100 150 200 LSGX - TWO STAGE

More information

Pump Specifications. D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND

Pump Specifications. D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND Pump Specifications D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND 200 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 190 180 170 160 LSGX - TWO STAGE 50 150 140 130 40 FT. OF HEAD

More information

Pump Specifications FL150 Series Submersible Effluent Pump

Pump Specifications FL150 Series Submersible Effluent Pump Pump Specifications FL150 Series Submersible Effluent Pump FL150_P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. FL150-Series Dimensional

More information

Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump

Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump 290_P1 R09/7/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 290-Series Dimensional

More information

Pump Specifications 280 Series 1/2 hp Submersible Effluent Pump

Pump Specifications 280 Series 1/2 hp Submersible Effluent Pump Pump Specifications 280 Series 1/2 hp Submersible Effluent Pump 280_P1 R01/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 280-Series Dimensional

More information

Pump Specifications 250 Series Submersible Sump / Effluent Pump

Pump Specifications 250 Series Submersible Sump / Effluent Pump Pump Specifications 250 Series Submersible Sump / Effluent Pump 250_P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 250-Series Dimensional

More information

Pump Specifications. Omnivore 2HP Submersible Grinder Pumps LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE)

Pump Specifications. Omnivore 2HP Submersible Grinder Pumps LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE) Pump Specifications LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE) Omnivore 2HP Submersible Grinder Pumps LSG200_P1 R9/30/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications

More information

MYERS MODELS 4V AND 4VX

MYERS MODELS 4V AND 4VX MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice

More information

Pump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump

Pump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump Head (Feet) Head (Meters) Pump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump 70 Flow (Liters Per Minute) 0 38 76 114 151 189 227 265 303 341 379 21 FLH 60 60 FL 60 18 50 15 40 12 30

More information

MYERS 4VCDP. 4" Solids Handling

MYERS 4VCDP. 4 Solids Handling MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"

More information

JDL SYSTEMS Submersible Sump / Sewage Pumps Table of Contents Project: Model: Chk d: Date:

JDL SYSTEMS Submersible Sump / Sewage Pumps Table of Contents Project: Model: Chk d: Date: Table of Contents Project: Model: Chk d: Date: Model JCSN 2JCSN2 (2 HP) 3JCSN2 (2 HP) 3JCSNY2 (2 HP) 3JCSN3 (3 HP) 3JCSNY3 (3 HP) 3JCSN ( HP) 3JCSNY ( HP) 3JCSN7 (7. HP) 3JCSNY7 (7. HP) 3JCSN1 (1 HP) 3JCSNY1

More information

Pump Specifications FL100 Series Submersible Effluent Pump

Pump Specifications FL100 Series Submersible Effluent Pump Head (Feet) Head (Meters) Pump Specifications FL100 Series Submersible Effluent Pump Flow (Liters Per Minute) 100 0 38 76 114 151 189 227 265 303 341 379 416 30 90 27 80 24 70 21 60 18 50 15 40 12 30 9

More information

MYERS MODELS 4R AND 4RX

MYERS MODELS 4R AND 4RX MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice

More information

MYERS MODELS 6VC & 6VCX

MYERS MODELS 6VC & 6VCX MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating

More information

Commercial Sewage & Waste Water Systems

Commercial Sewage & Waste Water Systems Commercial Sewage & Waste Water Systems EDP-4 72 Gallon 24 x 36 Basin EDP-6 108 Gallon 30 x 36 Basin EDP-8 158 Gallon 36 x 36 Basin 1/2 HP pump 2 PVC Sch 80 discharge, 3 float switches and cover 2 NPT,

More information

Potable Water Systems

Potable Water Systems Potable Water Systems Submersible Pumps Lawn Sprinkler/Irrigation Pumps Jet Pumps Centrifugal Pumps Your Peace of Mind is Our Top Priority WHAT SETS ZOELLER PUMPS APART? Since 1939, Zoeller Company has

More information

KG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)

KG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM) Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,

More information

MYERS MODELS 4RC AND 4RCX

MYERS MODELS 4RC AND 4RCX 3450 RPM 1150 and 1750 RPM MYERS MODELS 4RC AND 4RCX SOLIDS HANDLING WASTEWATER PUMPS (4RCX only) STANDARD (4RC) AND HAZARDOUS LOCATION (4RCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4RC AND 4RCX Solids

More information

LITERS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS GALLONS PER MINUTE

LITERS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS GALLONS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications PRG - SERIES Residential Grinder Pump 60 LITERS PER MINUTE 0 20 40 60 80 100 120 140 160 180 18 50 16 14 40 12 30 10 8 20 6 10 4 2 0 0 0 10 20

More information

MYERS MODELS 4VC & 4VCX

MYERS MODELS 4VC & 4VCX MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping

More information

KW Submersible, Single-Vane Impeller

KW Submersible, Single-Vane Impeller Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95

More information

DSZ3. EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

DSZ3. EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A1003 C1605 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-203 Model Designation 3-206 Impeller Data 3-208 Material

More information

Pump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp

Pump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp Pump Specifications ELV Series Submersible Sump Pump with OilTector Control ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp ELV_ P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications

More information

OIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100

OIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100 OIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100 The Oil Smart OSS-100 System, when combined with a manual sump pump, will automatically pump water without the risk of pumping oil into the environment. Additionally,

More information

Pump Specifications 405 Series Commercial Drain Pump (High-Temp)

Pump Specifications 405 Series Commercial Drain Pump (High-Temp) Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 405_P1 R8/22/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 405-Series Dimensional

More information

P U M P. Pumps for Municipal and Commercial Operations

P U M P. Pumps for Municipal and Commercial Operations P U M P Pumps for Municipal and Commercial Operations Ashland Pump The Ashland Pump Company designs, manufactures, and distributes an extensive line of durable, dependable products for use in the Plumbing,

More information

CGUII/CGFU. Model CGUII/CGFU Contents. EBARA PRO Cast Grinder Pumps. Model 32CGUII61.5S

CGUII/CGFU. Model CGUII/CGFU Contents. EBARA PRO Cast Grinder Pumps. Model 32CGUII61.5S Model Contents Model 3CGUII6.5S 3CGFU6.5S 3CGFU6.5 5CGFU6.S 5CGFU6. 5CGFU63.7S 5CGFU63.7 Section Page Specifications 8 Selection Chart 83 Performance Curves 86 Dimensions 88 Sectional View 83 QDC Information

More information

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A03 C15 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-3 Model Designation 3-6 Impeller Data 3-8 Material Specifications

More information

KGX2-21. Grinder Pumps. 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve

KGX2-21. Grinder Pumps. 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve Grinder Pumps Your Premier Pump Choice KGX2-21 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP KGX2-21 series centrifugal grinder pumps easily

More information

Series MSC Sewage Chopper Pumps

Series MSC Sewage Chopper Pumps Capacities to 450 GPM Heads to 65 Feet HP to 10 HP-1750 RPM Series MSC Sewage Chopper Pumps Hardened tungsten carbide edged rotating impeller cutting and chopping against stationary chrome hardened suction

More information

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50 Spherical Solids Handling www.cranepumps.com Series 8SHDU 21 Frame Driver Specifications: DISCHARGE... 8", 125 lb. Horizontal Flange Slotted to accommodate 200mm ISO Flanges LIQUID TEMPERATURE... 4 F (40 C) Continuous VOLUTE...

More information

SKHS SERIES 2 HP 1-1/2 HP 1 HP 1/2 HP CAPACITY-U.S. G.P.M.

SKHS SERIES 2 HP 1-1/2 HP 1 HP 1/2 HP CAPACITY-U.S. G.P.M. Performance RPM: 3450 Discharge: 2" Solids: 2" Wholesale Products Page: 6560-1 Section: Performance 80 70 2 HP TOTAL DYNAMIC HEAD-FEET 60 50 40 30 20 1 HP 1-1/2 HP 1/2 HP 10 0 0 32 64 96 128 160 192 CAPACITY-U.S.

More information

SPD50H/100H. Performance Data SPD100H SPD50H. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001

SPD50H/100H. Performance Data SPD100H SPD50H. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001 Performance SPD50H/100H RPM: 3450 Discharge: 2" Solids: 3/4" Wholesale Products Page: 6130-1 Section: Performance Dated: April 2002 Supersedes: January 2001 SPD50H SPD100H The curves reflect maximum performance

More information

SKV40. Performance Data. Wholesale Products Page: Section: Performance Data Dated: January RPM: 1550 Discharge: 2" Solids: 2" GPM: TDH:

SKV40. Performance Data. Wholesale Products Page: Section: Performance Data Dated: January RPM: 1550 Discharge: 2 Solids: 2 GPM: TDH: Performance RPM: 1550 Discharge: 2" Solids: 2" Wholesale Products Page: 6730-1 Section: Performance 8 25 7 20 HEAD-METERS 5 4 HEAD-FEET 15 4/10 HP 3 10 2 0 0 20 40 60 80 Capacity-U.S. G.P.M. Liters/Second

More information

Section 200 Page 1 Effective: January 15, 2013 Supersedes: June 1, 2012

Section 200 Page 1 Effective: January 15, 2013 Supersedes: June 1, 2012 Section 200 Page 1 HPG200 - Submersible Grinder Pump Model Volt/Ph Imp Dia-in. Cord Wt. (lbs.) Part Number List Price HPG200M2-2 230/1 5.5 20' 82 526031007 $2,549 HPG200M3-2 230/3 5.5 20' 82 526031017

More information

HYDROMATIC SK75/100 SUBMERSIBLE SEWAGE EJECTOR

HYDROMATIC SK75/100 SUBMERSIBLE SEWAGE EJECTOR SK75/100 PERFORMANCE DATA Wholesale Products Page: 6300-1 RPM: 1750 Discharge: 2 Solids: 2 12 40 HEAD-METERS 9 6 3 TOTAL HEAD IN FEET 30 20 10 SK75 SK100 0 0 Capacity-U.S. G.P.M. 0 20 40 60 80 100 120

More information

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling Series 6SHV 21 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

Series 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling

Series 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3 Spherical Solids Handling Series 4XSHV 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

HYDROMATIC SKHS SERIES SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR

HYDROMATIC SKHS SERIES SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR PERFORMANCE DATA Wholesale Products Page: 6560-1 RPM: 450 Discharge: 2 Solids: 2 80 70 2 HP 60 TOTAL DYNAMIC HEAD-FEET 50 40 0 1 HP 1-1/2 HP 1/2 HP 20 10 0 0 2 64 96 128 160 192 CAPACITY-U.S. G.P.M. The

More information

Series 6SHM. Specifications: Series: 6SHM 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6SHM. Specifications: Series: 6SHM 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling www.cranepumps.com Series 6SHM 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

HYDROMATIC SPD50H/100H SUBMERSIBLE HIGH HEAD, DOUBLE SEAL EFFLUENT

HYDROMATIC SPD50H/100H SUBMERSIBLE HIGH HEAD, DOUBLE SEAL EFFLUENT PERFORMANCE DATA Wholesale Products Page: 6130-1 Supersedes: April 2002 RPM: 3450 Discharge: 2 Solids: ¾ SPD50H SPD100H HEAD-METERS 18 12 6 TOTAL HEAD IN FEET 60 40 20 0 0 Capacity-U.S. G.P.M. SPD50H SPD100H

More information

Simplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover

Simplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover www.cranepumps.com Simplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover Specifications: inches (mm) BASIN...Fiberglass w/ 3 (76)

More information

Series 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling www.cranepumps.com Series 6XSHD 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

Series 4XSHM 18 Frame Driver 3" Spherical Solids Handling

Series 4XSHM 18 Frame Driver 3 Spherical Solids Handling Series 4XSHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

Series 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling

Series 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3 Spherical Solids Handling www.cranepumps.com Series 4XSHD 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

Series 4SHM. Specifications: Series: 4SHM 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling. Solids Handling Submersible Pumps

Series 4SHM. Specifications: Series: 4SHM 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3 Spherical Solids Handling. Solids Handling Submersible Pumps www.cranepumps.com Series 4SHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

CENTERLINE DISCHARGE. Technical Data 5730 MV 490 FRAME PULL-UP SUBMERSIBLE,

CENTERLINE DISCHARGE. Technical Data 5730 MV 490 FRAME PULL-UP SUBMERSIBLE, Technical Data 5730 MV 490 FRAME PULL-UP SUBMERSIBLE, CENTERLINE DISCHARGE CABLE Power and control cable are UL Listed and CSA Approved. ELECTRICAL CONNECTION Double-seal system with strain relief, consisting

More information

Duplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover

Duplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover www.cranepumps.com Duplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover Pre-Packaged Fiberglass Systems Specifications: inches (mm)

More information

Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS

Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS Wet End Rotation Volute Nozzles Impeller Wear Rings Shaft Bearing Frame Bearing Radial/Thrust Lubrication Seal Motor Lifting Bail Volute Discharge

More information

HYDROMATIC SPX50/SPX50H EXPLOSION PROOF, SEWAGE EJECTOR

HYDROMATIC SPX50/SPX50H EXPLOSION PROOF, SEWAGE EJECTOR PERFORMANCE DATA Wholesale Products Page: 6800-1 SPX50 RPM: 1750 Discharge: 2 Solids: 2 SPX50H RPM: 1750 Discharge: 1 ½ Solids: ¾ 40 35 TOTAL HEAD IN FEET 30 25 20 SPX50 SPX50H 15 10 0 10 20 30 40 50 60

More information

Complete Grinder Package Offering

Complete Grinder Package Offering Complete Grinder Package Offering NEW TL-Pro System Package includes your choice of a 2HP submersible grinder pump, TL-Pro or TG-Pro lift out system, control panel, three floats and a fiberglass basin

More information

Pump Specifications Series. Pre-assembled Duplex Sewage System 30 x 36, 110 Gallon

Pump Specifications Series. Pre-assembled Duplex Sewage System 30 x 36, 110 Gallon Pump Specifications 1100-Series Pre-assembled Duplex Sewage System 30 x 36, 110 Gallon 1100-P1 R2/19/2013 Copyright 2013 Liberty Pumps Inc. All rights reserved. Specifications subject to change without

More information

Turbine STEP System SIMPLEX OR DUPLEX

Turbine STEP System SIMPLEX OR DUPLEX 3649 Cane Run Road Louisville, KY 211-1961, USA 1-800-928-7867 1-502-778-2731 Fax: 1-502-774-3624 www.clarusenvironmental.com SECTION: C1.20.120 CL0019 0816 Supersedes 1212 Turbine STEP System SIMPLEX

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTNTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

Your Premier Pump Choice!

Your Premier Pump Choice! Limited Warranty During the time periods and subject to the conditions hereinafter set forth, Keen Pump will repair or replace to the original user or consumer, any portion of your new Keen product which

More information

Boand Arena Septic to Sewer Duplex Grinder Pumps (Commercial) Engineering Analysis

Boand Arena Septic to Sewer Duplex Grinder Pumps (Commercial) Engineering Analysis WNEK ENGINEERING Consulting Civil Engineer 3388 NW Byron St., Suite 200, Silverdale, WA 98383 360-692-3802 (fax)-692-1051 Boand Arena Septic to Sewer Duplex Grinder Pumps (Commercial) Engineering Analysis

More information

Built For Work. THREE-PHASE PUMPS

Built For Work. THREE-PHASE PUMPS Built For Work. THREE-PHASE PUMPS Three-Phase Dewatering Pumps Accessories 1 2 5 5 3 4 6 7 10 2 The cutaway view above is a KTZ series pump. This pump illustrates the common design features used in Tsurumi

More information

Series 3SHM. Specifications: Series: 3SHM 2-7.5HP, 1750RPM, 60Hz. 18 Frame Driver 2.5" Spherical Solids Handling. Solids Handling Submersible Pumps

Series 3SHM. Specifications: Series: 3SHM 2-7.5HP, 1750RPM, 60Hz. 18 Frame Driver 2.5 Spherical Solids Handling. Solids Handling Submersible Pumps Series 3SHM 18 Frame Driver 2.5" Spherical Solids Handling Specifications: DISCHARGE...3, 125 lb. Horizontal Flange Slotted to accommodate 80mm ISO Flanges LIQUID TEMPERATURE...104 F (40 C) Continuous

More information

Pumps and Systems. Trusted. Tested. Tough.

Pumps and Systems. Trusted. Tested. Tough. Pumps and Systems Commercial Duty Pumps Heavy Duty Solids Handling Pumps Hazardous Duty Pumps Grinder Pumps and systems Engineered ift Stations Trusted. Tested. Tough. WHAT SETS ZOEE PUMPS APAT? Since

More information

ECC ECC Flow(USGPM) Sump & Effluent De-watering Drainage. Phase Voltage Approx Weight (lbs)

ECC ECC Flow(USGPM) Sump & Effluent De-watering Drainage. Phase Voltage Approx Weight (lbs) Series ECC - Submersible Sump Pump Wilo ECC 3 2 2 1 1 ECC29-1. ECC22-1.33 Wilo-SP-ECC 34 RPM 6 Hz - North America 1 2 3 4 6 7 Stainless steel bottom-screened inlet Replaceable piggyback tether float switch

More information

AMPRO ELECTRIC LTD. Series 6SHV 21 Frame Driver 3" Spherical Solids Handling. Specifications: Series: 6SHV HP, 1750RPM, 1150RPM, 60Hz

AMPRO ELECTRIC LTD. Series 6SHV 21 Frame Driver 3 Spherical Solids Handling. Specifications: Series: 6SHV HP, 1750RPM, 1150RPM, 60Hz 21 Frame Driver Specifications: DISCHARGE...6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE...104 F (40 C) Continuous VOLUTE...Cast Iron ASTM A-48, Class 30 WEAR

More information

Contents Project: Model: Chk d: Date:

Contents Project: Model: Chk d: Date: Contents Model No. Specifications Selection Performance Dimensions Sectional Chart Curve Pump Motor Data View DWU6.4S DWU6.75S - DWU6.4S DWU6.75S DWU6.S -9-0 - -8-48 -56-46 DWU6.5S DWU6.4 - DWU6.75 DWU6.

More information

Valve Selection. 1. Function and service considerations

Valve Selection. 1. Function and service considerations 1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.

More information

INSTALLATION INSTRUCTIONS RECOMMENDED MODELS

INSTALLATION INSTRUCTIONS RECOMMENDED MODELS Notice to installing contractor: Instructions must remain with installation. Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.

More information

.2 Section Waste Management and Disposal..5 Section Thermometers and Pressure Gauges Piping Systems.

.2 Section Waste Management and Disposal..5 Section Thermometers and Pressure Gauges Piping Systems. Issued 2005/06/01 Section 15440 Plumbing Pumps Page 1 of 9 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3 Section 01780 Closeout

More information

Check Valve MODEL. Schematic Diagram. Product Dimensions Data:

Check Valve MODEL. Schematic Diagram. Product Dimensions Data: Check Valve Simple Proven Design No-Slam Operation Drip-Tight Shut-Off No Packing Glands or Stuffing Boxes Easy to Install & Maintain 8-0 (Full Internal Port) MODEL 68-0 (Reduced Internal Port) The Cla-Val

More information

SUBMERSIBLE PUMP RANGE

SUBMERSIBLE PUMP RANGE SUBMERSIBLE PUMP RANGE www.vegapumps.co.za INDEX VXM / VX SUBMERSIBLE PUMP... 4 PERFORMANCE DATA... 5 V RANGE SCREENED SWAGE SUBMERSIBLE PUMP... 6 PERFORMANCE DATA... 7 DIMENSIONAL DRAWING... 9 C-SERIES

More information

D51 D61 D71 D91 Series

D51 D61 D71 D91 Series MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications

More information

100H, 150H, 225H, 275H

100H, 150H, 225H, 275H TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the

More information

BUILT FOR WORK. w w w. t e c h n o s u b. n e t

BUILT FOR WORK. w w w. t e c h n o s u b. n e t C O N T R A C T O R / M I N I N G P U M P S BUILT FOR WORK D e w a t e r i n g P u m p s A g i t a t o r P u m p s A c c e s s o r i e s Rugged Tsurumi pumps are loaded top to bottom with features to withstand

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

experience when counts Pumps Systems

experience when counts Pumps Systems experience when counts Pumps Systems Accessoriescessorie Power-Flo Pumps & Systems Garden City Park, New York warehousing, assembly and service facility Power-Flo Pumps & Systems Ohio facility Power-Flo

More information

Basins, Floats & Accessories

Basins, Floats & Accessories Basins, Floats & Accessories Aqua Pro Pump Systems a Tomiko Inc. Company APPS Basins, Floats & Accessories BasinS Basin Size Gallons Weight 24 X 48 94 55 24 X 60 118 63 24 X 72 141 70 24 X 84 165 88 30

More information

Simplex. Specifications: EasyELECTRIC Factory Prewired Basin Package Stainless Rail with Junction Box. Basin Assemblies

Simplex. Specifications: EasyELECTRIC Factory Prewired Basin Package Stainless Rail with Junction Box. Basin Assemblies www.cranepumps.com Simplex EasyELECTRIC Factory Prewired Basin Package Stainless Rail with Junction Box PS-025 Specifications: inches (mm) Basin Assemblies BASIN...Fiberglass w/ 3 (76) Ballast Support

More information

ABS submersible sewage pump AFP

ABS submersible sewage pump AFP BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance

More information

OWNER S MANUAL MODELS 810 & 815 PROGRESSING CAVITY GRINDER PUMPS

OWNER S MANUAL MODELS 810 & 815 PROGRESSING CAVITY GRINDER PUMPS NOTICE TO INSTALLER: Instructions must remain with installation. Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding

More information

Submersible Grinder Pumps Type ABS Piranha

Submersible Grinder Pumps Type ABS Piranha Submersible Grinder Pumps Type ABS Main Applications Sulzer s range of submersible grinder pumps, type ABS, contain the most effective cutting system for use in pressure sewer systems. The pumps have proven

More information

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and

More information

Technical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.

Technical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD. Technical Data DML Submersible Sewage s with Single Channel Impeller AUSTRALIA PTY. LTD. DML_Techdata_SS_V Contents -SPECIFICATIONS FEATURES & APPLICATIONS TYPICAL EXPLODED VIEW SPECIFICATIONS SELECTION

More information

JUNG PUMPEN MULTICUT SEWAGE PUMPS

JUNG PUMPEN MULTICUT SEWAGE PUMPS APPLICATION Centrifugal submersible sewage pumps fitted with the MultiCut cutting system are used as stationary appliances for backpressure protection of detached houses. They are suitable for pumping

More information

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates

More information

EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:

EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date: Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation

More information