OIL/WATER SEPARATORS LIST PRICE 01/18 EFFECTIVE: JANUARY 1, 2018 PUBLICATION NO. PG 11015H SUPERSEDES PG 11015G

Transcription

1 OIL/WATER SEPARATORS LIST PRICE EFFECTIVE: JANUARY 1, 2018 PUBLICATION NO. PG 11015H SUPERSEDES PG 11015G 01/18

2 CONDITIONS OF SALE Containment Solutions products must be installed according to current installation instructions. All Local, State, Federal, and Provincial codes should be followed. Fiberglass tanks require proper selection of backfill materials and good construction practices during installation. The proper handling, installation and care of all tanks are the responsibility of the owner and any loss or damage resulting from improper installation, handling or care, or from storage of a product not approved by CSI, shall not be the responsibility of CSI. Owner is responsible for fully disclosing to CSI the intended usage and contents stored for each tank. General terms and conditions of sale apply to these products and are stated in CSI Terms and Conditions as written on the Order Acknowledgement and Invoice. All prices are stated in USD and subject to change without notice. Payment Terms: 50% deposit required with order. Balance subject to credit approval. WARRANTY Product warranties are available on the CSI website or by calling your local sales representative. Product warranties are suspended until the CSI invoice is paid in full. CSI does not warrant any installed product, component or parts manufactured by others. All consumable parts including but not limited to gaskets and o-rings are excluded from all CSI warranties. SHIPPING TERMS F.O.B. Manufacturing Plants: Bakersfield, California Tulsa, Oklahoma Mt. Union, Pennsylvania All prices herein are F.O.B. shipping point. Freight invoiced to customer, sellers routing. Reference the most current Freight & Delivery Zone Rate Schedule. Fuel surcharges may be added to the invoice as necessary. All orders subject to minimum-order value. Taxes not included. 2

3 TABLE OF CONTENTS Fiberglass Products ULCSI 10 - UL 2215 Models 4' Diameter Fiberglass Underground Oil / Water Separators ' Diameter Fiberglass Underground Oil / Water Separators ' Diameter Fiberglass Underground Oil / Water Separators ' Diameter Fiberglass Underground Oil / Water Separators CSI-10 Model Fiberglass Underground Oil / Water Separator CSI-15 Model Fiberglass Underground Oil / Water Separator Single-Wall Fiberglass Underground Interceptors for Oil / Sand / Grit...16 Tank Mounted Options and Accessories...17 Miscellaneous Tank Accessories...18 Single-Wall Tank Sumps...19 Double-Wall Tank Sumps...21 Tank Sumps Accessories...23 Deadman Anchoring Systems and Turnbuckles...24 Oil Stop Valves...25 Drop-Out Box / Catch Basin...26 Fluid Electronics Steel Products AOWS Model Aboveground Steel Oil / Water Separator...29 Aboveground Steel Oil / Water Separator - Pump, Valve & Panel System...30 Mop Up Model Aboveground Oil / Water Separator

4 4' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed Allowed Flow 1200 ppm Oil Inlet Concentration 10 ppm Effluent # of Plate Packs.85 S.G. Flow Rate.90 S.G..95 S.G. Tank Oil Storage Oil Spill (1) Inlet/Outlet Nozzle Size Single-Wall List Price (2) Double-Wall Brine Filled Interstice & Reservoir " $23,050 $29,605 $1, " $24,640 $31,195 $1, , " $26,760 $37,200 $1, , " $28,345 $38,780 $1, , " $29,935 $40,375 $1, , ,211 4" $31,515 $41,965 $1, , ,286 4" $34,105 $44,555 $1, , ,362 4" $35,710 $46,140 $1, , ,437 4" $37,305 $47,725 $1, , ,512 6" $39,395 $49,825 $1, , ,587 6" $42,645 $53,095 $1, , ,662 6" $44,230 $54,675 $1,750 (1) Emergency oil spill capacity is 80% of total volume based on no accumulated oil in vessel at time of spill. (2) List price includes separator with coalescer plates, four 4" openings, flanged inlet and outlet. 4' and 6' diameter separators include one 29" x 23" oval manway. -- 4,000 gallon and larger tanks also include one additional 22" manway. 8' and 10' diameter separators include one 29" x 23" oval manway. -- 7,000 gallon and larger tanks also include one 22" manway. UL listed separators 6 plate packs and greater have 1 additional 22" manway. (3) For deeper burial depths, contact Technical Support. (4) Prices include total number of straps required per tank. Split-strap assembly includes necessary hardware and (1) tightener. D A Double-Wall Oil / Water Separator B Coalescer Packs Optional Accessories C Tank Sump D Drop Out Box E Control Panel with Alarm F Oil Stop Valve 4

5 4' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed (continued) Allowed Flow 1200 ppm Oil Inlet Concentration 10 ppm Effluent Deep Bury Adder (3) Anchor Strap (4) Nominal Length Nominal Weight (lbs) Single-Wall Double-Wall 7' thru 10' 11' thru 15' 7' thru 10' 11' thru 15' Price Per Tank Qty. Split Strap Assembly Single-Wall Double-Wall Single-Wall Double-Wall $1,865 $3,015 $2,255 $3,710 $610 2 N/A 10' 8" 10' 9" 1,275 1,855 $1,960 $3,185 $2,360 $3,915 $610 2 N/A 10' 8" 10' 9" 1,315 1,895 $2,085 $3,415 $2,705 $4,565 $610 2 N/A 11' 10" 11' 11" 1,395 2,015 $2,180 $3,505 $2,795 $4,750 $610 2 N/A 11' 10" 11' 11" 1,475 2,135 $2,265 $3,590 $2,895 $4,915 $610 2 N/A 13' 9" 13' 10" 1,555 2,255 $2,370 $3,945 $3,005 $5,085 $610 2 N/A 16' 10" 16' 11" 1,845 2,665 $2,525 $4,230 $3,105 $5,385 $610 2 N/A 17' 10" 17' 11" 1,925 2,785 $2,620 $4,400 $3,245 $5,550 $610 2 N/A 18' 10" 18' 11" 2,005 2,905 $2,720 $4,580 $3,335 $5,730 $1,220 4 N/A 19' 10" 19' 11" 2,085 3,025 $2,840 $4,805 $3,460 $5,955 $1,220 4 N/A 20' 10" 20' 11" 2,165 3,145 $3,030 $5,165 $3,660 $6,315 $1,220 4 N/A 21' 10" 21' 11" 2,245 3,265 $3,135 $5,340 $3,755 $6,485 $1,220 4 N/A 22' 10" 22' 11" 2,325 3,385 E UL2215 Model Oil / Water Separator Typical Illustration (4', 6', 8', & 10' Diameter) C F A B 5

6 6' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed Allowed Flow 1200 ppm Oil Inlet Concentration 10ppm Effluent # of Plate Packs.85 S.G. Flow Rate.90 S.G..95 S.G. Tank Oil Storage Oil Spill (1) Inlet/Outlet Nozzle Size Single-Wall List Price (2) Double-Wall Brine Filled Interstice & Reservoir , ,655 4" $39,265 $62,630 $1, , ,655 4" $42,770 $66,145 $1, , ,655 6" $46,275 $69,675 $2, , ,655 6" $49,790 $73,175 $2, , ,895 6" $55,875 $75,880 $2, , ,586 6" $59,390 $79,400 $2, , ,586 8" $62,895 $82,910 $2, , ,854 8" $66,405 $86,420 $2, , ,051 8" $68,000 $88,000 $2, , ,375 8" $69,590 $89,605 $2, , ,375 8" $71,175 $91,190 $2, , ,615 10" $72,775 $92,785 $3, , ,841 10" $74,350 $94,370 $3, , ,066 10" $75,950 $95,955 $3, , ,066 10" $77,530 $97,550 $3, , ,306 10" $79,080 $99,135 $3, , ,546 10" $80,670 $100,725 $3, , ,546 10" $82,270 $102,315 $3, ,161 1,015 5,729 10" $83,865 $103,905 $3, ,461 1,058 5,969 12" $85,445 $105,490 $3, ,796 1,105 6,237 12" $87,030 $107,080 $4, ,796 1,105 6,237 12" $88,610 $108,675 $4, ,042 1,140 6,434 12" $90,210 $110,265 $4, ,395 1,190 6,716 12" $91,800 $111,850 $4, ,395 1,190 6,716 12" $93,385 $113,435 $4, ,695 1,233 6,956 12" $94,975 $115,030 $4, , ,029 1,280 7,223 12" $96,565 $116,615 $4, , ,029 1,280 7,223 14" $98,155 $118,210 $4, , ,276 1,315 7,421 14" $99,745 $119,795 $5, , ,558 1,355 7,646 14" $101,330 $121,380 $5, , ,858 1,397 7,886 14" $102,920 $122,970 $5, , ,858 1,397 7,886 14" $104,510 $124,555 $5,405 Refer to page 4 for additional notes. 6

7 6' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed (continued) Allowed Flow 1200 ppm Oil Inlet Concentration 10ppm Effluent Deep Bury Adder (3) Anchor Straps (4) Nominal Length Nominal Weight (lbs) Single-Wall Double-Wall 7' thru 10' 11' thru 15' 7' thru 10' 11' thru 15' Price Per Tank Qty. Split Strap Assembly Single-Wall Double-Wall Single-Wall Double-Wall $2,835 $4,795 $4,235 $7,365 $650 2 $3,555 16' 8" 16' 9" 2,695 4,480 $3,045 $5,180 $4,445 $7,765 $650 2 $3,555 16' 8" 16' 9" 2,785 4,570 $3,255 $5,570 $4,660 $8,155 $650 2 $3,555 16' 8" 16' 9" 2,875 4,660 $3,460 $5,955 $4,880 $8,535 $650 2 $3,555 16' 8" 16' 9" 2,965 4,750 $3,825 $6,615 $5,035 $8,820 $650 2 $3,555 18' 1" 18' 2" 3,130 4,985 $4,050 $7,005 $5,250 $9,210 $650 2 $3,555 22' 2" 22' 3" 3,345 5,560 $4,245 $7,400 $5,450 $9,590 $650 2 $3,555 22' 2" 22' 3" 3,435 5,650 $4,460 $7,785 $5,670 $9,975 $650 2 $3,555 23' 9" 23' 10" 3,600 5,885 $4,560 $7,945 $5,755 $10,170 $1,300 4 $7,105 24' 11" 25' 3,765 6,120 $4,660 $8,135 $5,855 $10,335 $1,300 4 $7,105 26' 10" 26' 11" 3,930 6,355 $4,760 $8,310 $5,950 $10,510 $1,300 4 $7,105 26' 10" 26' 11" 4,020 6,445 $4,840 $8,480 $6,050 $10,680 $1,300 4 $7,105 28' 3" 28' 4" 4,185 6,680 $4,940 $8,660 $6,150 $10,860 $1,300 4 $7,105 29' 7" 29' 8" 4,350 6,915 $5,035 $8,825 $6,225 $11,025 $1,300 4 $7,105 30' 11" 31' 4,515 7,150 $5,135 $9,005 $6,325 $11,205 $1,300 4 $7,105 30' 11" 31' 4,605 7,240 $5,220 $9,170 $6,420 $11,390 $1,300 4 $7,105 32' 4" 32' 5" 4,770 7,475 $5,310 $9,350 $6,525 $11,560 $1,950 6 $10,660 33' 9" 33' 10" 4,935 7,710 $5,410 $9,515 $6,615 $11,740 $1,950 6 $10,660 33' 9" 33' 10" 5,025 7,800 $5,510 $9,700 $6,715 $11,910 $1,950 6 $10,660 34' 10" 34' 11" 5,190 8,035 $5,605 $9,875 $6,815 $12,075 $1,950 6 $10,660 36' 3" 36' 4" 5,355 8,270 $5,695 $10,055 $6,910 $12,250 $1,950 6 $10,660 37' 10" 37' 11" 5,520 8,505 $5,800 $10,220 $6,990 $12,440 $1,950 6 $10,660 37' 10" 37' 11" 5,610 8,595 $5,880 $10,395 $7,095 $12,610 $1,950 6 $10,660 39' 39' 1" 5,775 8,830 $5,975 $10,570 $7,190 $12,775 $1,950 6 $10,660 40' 8" 40' 9" 5,940 9,065 $6,080 $10,745 $7,285 $12,960 $1,950 6 $10,660 40' 8" 40' 9" 6,030 9,155 $6,180 $10,920 $7,370 $13,130 $1,950 6 $10,660 42' 1" 42' 2" 6,195 9,390 $6,280 $11,095 $7,465 $13,300 $1,950 6 $10,660 43' 8" 43' 9" 6,360 9,625 $6,360 $11,270 $7,570 $13,480 $1,950 6 $10,660 43' 8" 43' 9" 6,450 9,715 $6,460 $11,445 $7,665 $13,660 $1,950 6 $10,660 44' 10" 44' 11" 6,615 9,755 $6,560 $11,625 $7,770 $13,825 $1,950 6 $10,660 46' 2" 46' 3" 6,780 9,950 $6,655 $11,800 $7,855 $14,010 $1,950 6 $10,660 47' 7" 47' 8" 6,945 10,185 $6,740 $11,970 $7,945 $14,175 $1,950 6 $10,660 47' 7" 47' 8" 7,110 10,420 7

8 8' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed Allowed Flow 1200 ppm Oil Inlet Concentration 10ppm Effluent # of Plate Packs.85 S.G. Flow Rate.90 S.G..95 S.G. Tank Oil Storage Oil Spill (1) Inlet/Outlet Nozzle Size Single-Wall List Price (2) Double-Wall Brine Filled Interstice & Reservoir , ,109 4" $64,735 $80,615 $1, , ,109 4" $68,245 $84,135 $1, , ,109 4" $71,760 $87,660 $2, , ,109 6" $75,265 $91,155 $2, , ,109 6" $83,470 $96,015 $2, , ,237 8" $86,970 $99,520 $2, ,314 1,011 6,651 8" $94,000 $105,715 $2, ,847 1,076 7,078 8" $97,520 $109,230 $2, ,847 1,076 7,078 8" $101,025 $112,735 $2, ,264 1,127 7,411 10" $104,535 $116,245 $2, ,897 1,203 7,918 10" $111,240 $125,030 $3, ,357 1,259 8,286 10" $114,745 $128,545 $3, ,357 1,259 8,286 10" $118,245 $132,050 $3, ,847 1,319 8,678 10" $121,775 $135,565 $3, ,307 1,375 9,046 12" $125,295 $139,080 $3, ,307 1,375 9,046 12" $128,790 $142,585 $3, ,796 1,434 9,437 12" $143,440 $156,820 $3, ,228 1,487 9,782 12" $146,935 $160,325 $3, ,746 1,550 10,197 12" $150,460 $163,840 $3, ,746 1,550 10,197 12" $153,970 $167,355 $4, , ,091 1,592 10,473 12" $157,485 $170,865 $4, , ,091 1,592 10,473 14" $161,000 $174,380 $4, , ,595 1,653 10,876 14" $174,715 $190,350 $4, , ,127 1,718 11,302 14" $178,220 $193,855 $4, , ,732 1,791 11,786 14" $179,800 $195,440 $4, , ,221 1,851 12,177 14" $181,390 $197,045 $4, , ,221 1,851 12,177 14" $182,995 $198,630 $4, ,357 1, ,681 1,907 12,545 14" $184,580 $200,215 $5, ,405 1, ,171 1,966 12,937 14" $186,170 $201,805 $5, ,454 1, ,631 2,022 13,305 16" $187,755 $203,400 $5, ,502 1, ,631 2,022 13,305 16" $189,345 $204,990 $5, ,551 1, ,120 2,082 13,696 16" $190,930 $206,570 $5, ,599 1, ,580 2,138 14,064 16" $192,520 $208,165 $5, ,648 1, ,580 2,138 14,064 16" $194,115 $209,750 $5, ,696 1, ,041 2,194 14,433 16" $195,700 $211,345 $5, ,745 1, ,530 2,253 14,824 16" $197,290 $212,920 $5, ,793 1, ,991 2,309 15,193 16" $198,875 $214,510 $6, ,842 1, ,991 2,309 15,193 16" $200,465 $216,105 $6, ,890 1, ,509 2,372 15,607 18" $202,065 $217,700 $6, ,938 1, ,509 2,372 15,607 18" $203,650 $219,290 $6, ,987 1, ,998 2,432 15,998 18" $205,230 $220,880 $6, ,035 1, ,458 2,488 16,366 18" $206,820 $222,465 $6,650 Refer to page 4 for additional notes. 8

9 8' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed (continued) Single-Wall Allowed Flow 1200 ppm Oil Inlet Concentration 10ppm Effluent Deep Bury Adder (3) Anchor Strap (4) Nominal Length Nominal Weight (lbs) Double-Wall 7' thru 10' 11' thru 15' 7' thru 10' 11' thru 15' Price Per Tank Qty Split Strap Assembly Single-Wall Double-Wall Single-Wall Double-Wall $4,360 $7,590 $5,310 $9,340 $750 2 $3,650 20' 10" 20' 11" 3,730 6,530 $4,565 $7,980 $5,525 $9,725 $750 2 $3,650 20' 10" 20' 11" 3,970 6,650 $4,785 $8,375 $5,735 $10,110 $750 2 $3,650 20' 10" 20' 11" 4,210 6,780 $5,005 $8,765 $5,950 $10,500 $750 2 $3,650 20' 10" 20' 11" 4,450 6,900 $5,485 $9,655 $6,230 $11,030 $750 2 $3,650 20' 10" 20' 11" 4,690 7,280 $5,695 $10,050 $6,445 $11,430 $1,500 4 $7,305 24' 11" 25' 5,350 8,850 $6,110 $10,815 $6,820 $12,105 $1,500 4 $7,305 26' 5" 26' 6" 5,590 9,230 $6,325 $11,205 $7,025 $12,490 $1,500 4 $7,305 27' 11" 28' 5,940 9,610 $6,540 $11,580 $7,240 $12,875 $1,500 4 $7,305 27' 11" 28' 6,060 9,990 $6,740 $11,980 $7,450 $13,260 $1,500 4 $7,305 29' 2" 29' 3" 6,300 10,370 $7,150 $12,220 $7,975 $14,230 $1,500 4 $7,305 31' 31' 1" 6,660 10,870 $7,360 $13,100 $8,190 $14,620 $1,500 4 $7,305 32' 4" 32' 5" 6,900 11,250 $7,575 $13,490 $8,405 $15,005 $1,500 4 $7,305 32' 4" 32' 5" 6,900 11,630 $7,785 $13,870 $8,605 $15,390 $1,500 4 $7,305 33' 9" 33' 10" 7,020 12,010 $7,985 $14,265 $8,820 $15,770 $1,500 4 $7,305 35' 1" 35' 2" 7,260 12,390 $8,200 $14,640 $9,035 $16,155 $1,500 4 $7,305 35' 1" 35' 2" 7,500 12,770 $9,085 $16,255 $9,880 $17,740 $2,250 6 $10,955 36' 6" 36' 7" 7,740 13,150 $9,290 $16,640 $10,095 $18,120 $2,250 6 $10,955 37' 9" 37' 10" 7,980 13,530 $9,505 $17,020 $10,305 $18,510 $2,250 6 $10,955 39' 3" 39' 4" 8,220 13,910 $9,710 $17,405 $10,520 $18,890 $2,250 6 $10,955 39' 3" 39' 4" 8,340 14,030 $9,930 $17,790 $10,735 $19,275 $2,250 6 $10,955 40' 3" 40' 4" 8,580 14,410 $10,140 $18,180 $10,935 $19,670 $2,250 6 $10,955 40' 3" 40' 4" 8,700 14,530 $10,960 $19,695 $11,895 $21,420 $2,250 6 $10,955 41' 8" 41' 9" 8,940 14,910 $11,165 $20,090 $12,115 $21,800 $2,250 6 $10,955 43' 3" 43' 4" 9,180 15,290 $11,265 $20,245 $12,210 $21,975 $2,250 6 $10,955 45' 45' 1" 9,420 15,670 $11,365 $20,425 $12,305 $22,155 $2,250 6 $10,955 46' 5" 46' 6" 9,660 16,050 $11,450 $20,610 $12,395 $22,335 $2,250 6 $10,955 46' 5" 46' 6" 9,780 16,170 $11,555 $20,790 $12,490 $22,500 $2,250 6 $10,955 47' 9" 47' 10" 10,020 16,550 $11,650 $20,950 $12,590 $22,675 $3,000 8 $14,605 49' 2" 49' 3" 10,260 16,930 $11,745 $21,140 $12,670 $22,845 $3,000 8 $14,605 50' 6" 50' 7" 10,500 17,310 $11,825 $21,305 $12,770 $23,025 $3,000 8 $14,605 50' 6" 50' 7" 10,620 17,430 $11,930 $21,475 $12,865 $23,195 $3,000 8 $14,605 51' 10" 51' 11" 10,860 17,810 $12,025 $21,665 $12,970 $23,370 $3,000 8 $14,605 53' 3" 53' 4" 11,100 18,190 $12,130 $21,840 $13,070 $23,555 $3,000 8 $14,605 53' 3" 53' 4" 11,220 18,310 $12,225 $21,995 $13,150 $23,720 $3,000 8 $14,605 54' 7" 54' 8" 11,460 18,690 $12,315 $22,185 $13,255 $23,900 $3,000 8 $14,605 56' 56' 1" 11,700 19,070 $12,405 $22,350 $13,360 $24,075 $3,000 8 $14,605 57' 4" 57' 5" 11,940 19,450 $12,500 $22,520 $13,435 $24,240 $3,000 8 $14,605 57' 4" 57' 5" 12,060 19,570 $12,605 $22,700 $13,540 $24,425 $3,000 8 $14,605 58' 10" 58' 11" 12,300 19,950 $12,700 $22,875 $13,640 $24,600 $3,000 8 $14,605 58' 10" 58' 11" 12,420 20,070 $12,780 $23,050 $13,730 $24,770 $3,000 8 $14,605 60' 3" 60' 4" 12,660 20,450 $12,885 $23,220 $13,820 $24,950 $3,000 8 $14,605 61' 7" 61' 8" 12,900 20,830 9

10 10' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed # of Plate Packs.85 S.G. Flow Rate.90 S.G. Allowed Flow 1200 ppm Oil Inlet Concentration 10ppm Effluent.95 S.G. Tank Oil Storage Oil Spill (1) Inlet/Outlet Nozzle Size Single-Wall List Price (2) Double-Wall Brine Filled Interstice & Reservoir ,297 1,314 11,438 6" $144,075 $159,945 $3, ,297 1,314 11,438 6" $150,355 $166,905 $3, ,297 1,314 11,438 6" $156,620 $173,875 $3, ,297 1,314 11,438 8" $162,905 $180,845 $3, ,297 1,314 11,438 8" $171,575 $190,460 $3, ,912 1,462 12,730 8" $177,860 $197,450 $3, ,912 1,462 12,730 10" $188,915 $209,720 $3, ,969 1,559 13,575 10" $195,180 $216,690 $4, ,528 1,611 14,022 10" $201,465 $223,650 $4, ,507 1,701 14,806 10" $207,745 $230,630 $4, ,507 1,701 14,806 12" $223,430 $248,035 $4, ,290 1,773 15,432 12" $229,725 $255,015 $4, ,123 1,849 16,098 12" $235,985 $261,980 $4, ,123 1,849 16,098 12" $242,270 $268,945 $4, , ,906 1,921 16,725 12" $248,540 $275,925 $5, , ,738 1,998 17,390 14" $254,810 $282,880 $5, , ,738 1,998 17,390 14" $280,225 $311,090 $5, , ,571 2,074 18,057 14" $286,505 $318,075 $5, , ,354 2,146 18,683 14" $292,775 $325,035 $5, ,338 1, ,138 2,218 19,310 14" $299,060 $332,005 $5, ,405 1, ,138 2,218 19,310 14" $305,340 $338,965 $6, ,472 1, ,970 2,295 19,976 16" $311,620 $345,945 $6, ,539 1, ,802 2,371 20,642 16" $340,160 $377,630 $6, ,606 1, ,802 2,371 20,642 16" $346,445 $384,590 $6, ,673 1, ,732 2,457 21,386 16" $349,275 $387,755 $6, ,740 1, ,565 2,533 22,052 16" $352,125 $390,895 $6, ,806 1, ,397 2,610 22,718 16" $354,955 $394,050 $6, ,873 1, ,397 2,610 22,718 18" $357,785 $397,205 $7, ,940 1, ,180 2,682 23,344 18" $360,625 $400,360 $7, ,007 1, ,964 2,754 23,971 18" $363,475 $403,525 $7, ,074 1, ,796 2,830 24,637 18" $366,315 $406,665 $7, ,141 1, ,796 2,830 24,637 18" $369,150 $409,825 $7, ,208 1, ,628 2,907 25,302 18" $372,000 $412,965 $7, ,275 1, ,412 2,979 25,930 18" $374,830 $416,125 $7, ,342 1, ,412 2,979 25,930 18" $377,675 $419,265 $8, ,409 1, ,244 3,055 26,595 20" $380,515 $422,420 $8, ,475 1, ,027 3,127 27,222 20" $383,355 $425,570 $8, ,542 1, ,007 3,217 28,006 20" $386,200 $428,730 $8, ,609 1, ,007 3,217 28,006 20" $389,020 $431,885 $8, ,676 2, ,839 3,294 28,671 20" $391,870 $435,035 $8, ,743 2, ,622 3,366 29,298 20" $394,715 $438,185 $9, ,810 2, ,622 3,366 29,298 20" $397,555 $441,340 $9, ,877 2, ,455 3,442 29,964 20" $400,410 $444,515 $9, ,944 2, ,238 3,514 30,590 20" $403,295 $447,720 $9, ,011 2,274 1,011 38,238 3,514 30,590 20" $406,195 $450,935 $9, ,145 2,375 1,056 39,021 3,586 31,217 24" $409,115 $454,170 $9,800 Refer to page 4 for additional notes.

11 10' Diameter Model ULCSI 10 - UL Underwriters Laboratories Listed (continued) Single-Wall Allowed Flow 1200 ppm Oil Inlet Concentration 10ppm Effluent Deep Bury Adder (3) Anchor Straps (4) Nominal Length Nominal Weight (lbs) Double-Wall 7' thru 10' 11' thru 15' 7' thru 10' 11' thru 15' Price Per Tank Qty Split Strap Assembly Single-Wall Double-Wall Single-Wall Double-Wall $9,125 $16,330 $10,075 $18,060 $1,620 4 $7,455 27' 9" 27' 10" 5,920 12,010 $9,500 $17,015 $10,495 $18,835 $1,620 4 $7,455 27' 9" 27' 10" 6,040 12,130 $9,875 $17,705 $10,905 $19,605 $1,620 4 $7,455 27' 9" 27' 10" 6,160 12,250 $10,250 $18,400 $11,330 $20,370 $1,620 4 $7,455 27' 9" 27' 10" 6,280 12,370 $10,770 $19,340 $11,910 $21,430 $1,620 4 $7,455 27' 9" 27' 10" 6,400 12,495 $11,145 $20,040 $12,330 $22,205 $1,620 4 $7,455 30' 6" 30' 7" 6,970 13,260 $11,810 $21,255 $13,065 $23,550 $1,620 4 $7,455 30' 6" 30' 7" 7,090 13,380 $12,185 $21,960 $13,480 $24,310 $1,620 4 $7,455 31' 10" 31' 11" 7,430 14,100 $12,570 $22,630 $13,900 $25,080 $1,620 4 $7,455 33' 3" 33' 4" 7,770 14,895 $12,945 $23,325 $14,305 $25,850 $1,620 4 $7,455 34' 11" 35' 8,110 15,715 $13,890 $25,065 $15,365 $27,770 $1,620 4 $7,455 34' 11" 35' 8,230 15,835 $14,265 $25,745 $15,780 $28,525 $1,620 4 $7,455 36' 3" 36' 4" 8,570 16,555 $14,635 $26,445 $16,195 $29,295 $2,430 6 $11,185 37' 7" 37' 8" 8,910 17,275 $15,010 $27,130 $16,610 $30,060 $2,430 6 $11,185 37' 7" 37' 8" 9,030 17,395 $15,390 $27,820 $17,040 $30,815 $2,430 6 $11,185 39' 39' 1" 9,370 18,115 $15,765 $28,510 $17,450 $31,590 $2,430 6 $11,185 40' 5" 40' 6" 9,710 18,835 $17,280 $31,290 $19,140 $34,705 $2,430 6 $11,185 40' 5" 40' 6" 9,830 19,855 $17,660 $31,990 $19,565 $35,470 $2,430 6 $11,185 41' 10" 41' 11" 10,170 19,675 $18,040 $32,685 $19,980 $36,245 $2,430 6 $11,185 43' 2" 43' 3" 10,510 20,395 $18,420 $33,375 $20,395 $36,990 $2,430 6 $11,185 44' 6" 44' 7" 10,850 21,115 $18,795 $34,065 $20,815 $37,760 $2,430 6 $11,185 44' 6" 44' 7" 10,970 21,235 $19,185 $34,750 $21,220 $38,530 $3,240 8 $14,910 45' 11" 46' 11,310 21,955 $20,885 $37,890 $23,130 $42,020 $3,240 8 $14,910 47' 4" 47' 5" 11,650 22,675 $21,260 $38,580 $23,555 $42,785 $3,240 8 $14,910 47' 4" 47' 5" 11,770 22,795 $21,435 $38,900 $23,740 $43,135 $3,240 8 $14,910 48' 11" 49' 12,110 23,515 $21,605 $39,215 $23,930 $43,470 $3,240 8 $14,910 50' 4" 50' 5" 12,450 24,235 $21,780 $39,525 $24,115 $43,820 $3,240 8 $14,910 51' 9" 51' 10" 12,790 24,955 $21,955 $39,840 $24,310 $44,165 $3,240 8 $14,910 51' 9" 51' 10" 12,910 25,075 $22,110 $40,145 $24,490 $44,515 $3,240 8 $14,910 53' 1" 53' 2" 13,250 25,795 $22,300 $40,465 $24,690 $44,865 $3,240 8 $14,910 54' 5" 54' 6" 13,590 26,515 $22,460 $40,770 $24,880 $45,200 $3,240 8 $14,910 55' 10" 55' 11" 13,930 27,235 $22,625 $41,080 $25,070 $45,550 $3,240 8 $14,910 55' 10" 55' 11" 14,050 27,355 $22,795 $41,400 $25,260 $45,900 $3,240 8 $14,910 57' 2" 57' 3" 14,390 28,075 $22,965 $41,700 $25,445 $46,255 $3,240 8 $14,910 58' 7" 58' 8" 14,730 28,795 $23,130 $42,025 $25,635 $46,600 $3,240 8 $14,910 58' 7" 58' 8" 14,850 28,915 $23,310 $42,335 $25,830 $46,940 $3,240 8 $14,910 60' 60' 1" 15,190 29,635 $23,480 $42,645 $26,005 $47,295 $3,240 8 $14,910 61' 4" 61' 5" 15,530 30,355 $23,650 $42,950 $26,205 $47,640 $3,240 8 $14,910 63' 63' 1" 15,870 31,075 $23,820 $43,275 $26,400 $47,980 $3,240 8 $14,910 63' 63' 1" 15,990 31,195 $23,985 $43,580 $26,580 $48,335 $3,240 8 $14,910 64' 5" 64' 6" 16,330 31,915 $24,155 $43,895 $26,775 $48,675 $3,240 8 $14,910 65' 9" 65' 10" 16,670 32,635 $24,335 $44,205 $26,955 $49,030 $3,240 8 $14,910 65' 9" 65' 10" 16,790 32,755 $24,490 $44,520 $27,145 $49,370 $3,240 8 $14,910 67' 2" 67' 3" 17,130 33,745 $24,680 $44,830 $27,345 $49,720 $3,240 8 $14,910 68' 6" 68' 7" 17,470 34,195 $24,845 $45,160 $27,535 $50,085 $3,240 8 $14,910 68' 6" 68' 7" 17,590 31,315 $25,025 $45,475 $27,730 $50,445 $4, $18,640 69' 10" 69' 11" 17,930 35,035 11

12 Model CSI 10 Nominal Flow Rate (GPM) Oil Storage Oil Spill (1) 4' Diameter Inlet/Outlet Nozzle Size Single-Wall CSI 10 List Price (2) Double-Wall CSI 10 Brine-filled Interstice & Reservoir " $20,355 $26,680 $930 1, " $25,980 $32,535 $1,015 1, ,200 4" $30,660 $36,295 $1,045 6' Diameter $1,8 2, ,600 6" $39,335 $43,540 $1,825 3, ,400 6" $42,230 $47,295 $2,005 4, ,200 6" $46,680 $53,705 $2,195 5, ,000 4,000 8" $59,325 $68,925 $2,275 6, ,200 4,800 8" $67,755 $79,230 $2,500 8' Diameter $2,6 6, ,200 4,800 8" $66,015 $77,500 $2,545 7, ,400 5,600 8" $72,205 $83,445 $2,660 8, ,600 6,400 10" $75,255 $88,120 $2,780 9, ,800 7,200 10" $81,805 $93,515 $2,960 10,000 1,000 2,000 8,000 10" $86,960 $100,780 $3,130 12,000 1,200 2,400 9,600 10" $90,945 $106,865 $3,405 15,000 1,500 3,000 12,000 12" $125,830 $145,265 $3,960 10' Diameter $8,8 20,000 2,000 4,000 16,000 14" $132,860 $160,025 $4,320 25,000 2,500 5,000 20,000 16" $153,695 $187,420 $7,445 30,000 3,000 6,000 24,000 16" $170,120 $203,570 $8,895 40,000 4,000 8,000 32,000 20" $189,760 $224,655 - (1) Emergency oil spill capacity is 80% of total volume based on no accumulated oil in vessel at time of spill. (2) List price includes separator with coalescer plates, four 4" openings, flanged inlet and outlet. 4' and 6' diameter separators include one 29" x 23" oval manway. -- 4,000 gallon and larger tanks also include one additional 22" manway. 8' and 10' diameter separators include one 29" x 23" oval manway. -- 7,000 gallon and larger tanks also include one 22" manway. (3) For deeper burial depths, contact Technical Support. (4) Prices include total number of straps required per tank. Split-strap assembly includes necessary hardware and (1) tightener. 12

13 Model CSI 10 (continued) Deep Bury Adder (3) Anchor Strap (4) Nominal Length Nominal Weight (lbs) 7' thru 10' 11' thru 15' Price Per Tank Qty. Split Strap Assembly 4' Diameter Single-Wall Double-Wall Single-Wall Double-Wall $1,720 $2,760 $ ' 8" 9' 9" $2,025 $3,335 $ ' 11' 1" 500 1,050 $2,320 $3,850 $ ' 10" 16' 11" 750 1, ' Diameter $2,840 $4,805 $650 2 $3,555 13' 10" 13' 8" 1,000 2,275 $3,015 $5,130 $650 2 $3,555 16' 16' 9" 1,075 2,750 $3,275 $5,610 $650 2 $3,555 19' 8" 19' 9" 1,475 2,975 $4,050 $7,005 $1,300 4 $7,105 24' 8" 25' 1,800 3,475 $4,550 $7,930 $1,300 4 $7,105 29' 6" 30' 3" 2,100 3, ' Diameter $4,445 $7,735 $750 2 $3,650 19' 5" 19' 6" 2,300 4,200 $4,810 $8,425 $750 2 $3,650 22' 2" 23' 7" 2,650 4,675 $5,005 $8,765 $1,500 4 $7,305 24' 11" 26' 4" 2,950 5,075 $5,390 $9,480 $1,500 4 $7,305 27' 8" 27' 9" 3,300 5,450 $5,695 $10,050 $1,500 4 $7,305 30' 5" 30' 6" 3,550 5,950 $5,935 $10,480 $1,500 4 $7,305 35' 11" 36' 4,375 7,000 $8,035 $14,310 $2,250 6 $10,955 44' 5" 44' 6" 5,350 8, ' Diameter $8,450 $15,100 $2,430 6 $11,185 37' 8" 37' 9" 6,950 11,900 $9,700 $17,385 $3,240 8 $14,910 45' 11" 46' 8,300 13,900 $10,965 $19,195 $3,240 8 $14,910 54' 2" 54' 3" 9,600 16,300 $11,865 $21,340 $4, $18,640 71' 3" 71' 4" 12,650 20,975 13

14 Model CSI 15 Nominal Flow Rate (GPM) Oil Storage Oil Spill (1) 4' Diameter Inlet/Outlet Nozzle Size Single-Wall CSI 15 List Price (2) Double-Wall CSI 15 Brine-filled Interstice & Reservoir " $19,030 $24,345 $930 1, " $21,540 $28,320 $1,015 1, ,200 4" $26,215 $31,140 $1,045 6' Diameter 2, ,600 6" $31,595 $35,590 $1,825 3, ,400 6" $34,180 $39,565 $2,005 4, ,200 6" $38,950 $50,445 $2,195 5, ,000 4,000 8" $49,490 $55,810 $2,275 6, ,200 4,800 8" $57,915 $69,400 $2,500 8' Diameter 6, ,200 4,800 8" $56,190 $67,660 $2,545 7, ,400 5,600 8" $59,565 $71,735 $2,660 8, ,600 6,400 10" $62,610 $74,550 $2,780 9, ,800 7,200 10" $65,880 $78,295 $2,960 10,000 1,000 2,000 8,000 10" $71,275 $84,380 $3,130 12,000 1,200 2,400 9,600 10" $75,485 $93,040 $3,405 15,000 1,500 3,000 12,000 12" $103,115 $122,555 $3,960 10' Diameter 20,000 2,000 4,000 16,000 14" $108,270 $135,195 $4,320 25,000 2,500 5,000 20,000 16" $128,175 $162,370 $7,445 30,000 3,000 6,000 24,000 16" $138,470 $178,750 $8,895 40,000 4,000 8,000 32,000 20" $169,375 $202,870 - (1) Emergency oil spill capacity is 80% of total volume based on no accumulated oil in vessel at time of spill. (2) List price includes separator with coalescer plates, four 4" openings, flanged inlet and outlet. 4' and 6' diameter separators include one 29" x 23" oval manway. -- 4,000 gallon and larger tanks also include one additional 22" manway. 8' and 10' diameter separators include one 29" x 23" oval manway. -- 7,000 gallon and larger tanks also include one 22" manway. (3) For deeper burial depths, contact Technical Support. (4) Prices include total number of straps required per tank. Split-strap assembly includes necessary hardware and (1) tightener. 14

15 Model CSI 15 (continued) Deep Bury Adder (3) Anchor Strap (4) Nominal Length Nominal Weight (lbs) 7' thru 10' 11' thru 15' Price Per Tank Qty. Split Strap Assembly 4' Diameter Single-Wall Double-Wall Single-Wall Double-Wall $1,615 $2,565 $ ' 8" 9' 9" $1,760 $2,855 $ ' 11' 1" 500 1,050 $2,060 $3,365 $ ' 10" 16' 11" 750 1,275 6' Diameter $2,375 $3,955 $650 2 $3,555 13' 10" 13' 8" 1,000 2,275 $2,525 $4,235 $650 2 $3,555 16' 16' 9" 1,075 2,750 $2,810 $4,770 $650 2 $3,555 19' 8" 19' 9" 1,475 2,975 $3,445 $5,925 $1,300 4 $7,105 24' 8" 25' 1,800 3,475 $3,850 $6,660 $1,300 4 $7,105 29' 6" 30' 3" 2,100 3,900 8' Diameter $3,955 $6,850 $750 2 $3,650 19' 5" 19' 6" 2,300 4,200 $4,055 $7,025 $750 2 $3,650 22' 2" 23' 7" 2,650 4,675 $4,235 $7,360 $1,500 4 $7,305 24' 11" 26' 4" 2,950 5,075 $4,430 $7,715 $1,500 4 $7,305 27' 8" 27' 9" 3,300 5,450 $4,760 $8,315 $1,500 4 $7,305 30' 5" 30' 6" 3,550 5,950 $5,010 $8,785 $1,500 4 $7,305 35' 11" 36' 4,375 7,000 $6,670 $11,815 $2,250 6 $10,955 44' 5" 44' 6" 5,350 8,650 10' Diameter $6,975 $12,390 $2,430 6 $11,185 37' 8" 37' 9" 6,950 11,900 $8,170 $14,575 $3,240 8 $14,910 45' 11" 46' 8,300 13,900 $8,785 $15,705 $3,240 8 $14,910 54' 2" 54' 3" 9,600 16,300 $10,645 $19,100 $4, $18,640 71' 3" 71' 4" 12,650 20,975 15

16 SINGLE-WALL FIBERGLASS UNDERGROUND INTERCEPTORS FOR OIL / SAND / GRIT Nominal NOTES: Inlet / Outlet Nozzle Size Single Basin List Price (1) Anchor Straps (2) Double Basin Triple Basin 4' Diameter One Piece Strap Nominal Length (1) List price includes interceptor, one 4" openings per basin, sludge baffle, flanged tangential inlet and outlet (with 2" vent) nozzles, and one 22" manway in each basin. (2) Anchor straps and hardware are optional accessories. Qty. Split Strap Assembly 550 4" $10,645 N/A N/A $ ' 3" 44 Nominal Weight (lbs.) 1,000 4" $11,755 $16,355 N/A $ ' 1" 514 1,500 4" $12,545 $18,240 $19,695 $ ' 10" 725 6' Diameter 2,000 6" $15,040 $20,100 N/A $650 2 $3,555 11' 1" 948 3,000 6" $17,260 $22,650 N/A $650 2 $3,555 16' 9" 1,046 4,000 6" $17,625 $22,690 $27,425 $650 2 $3,555 19' 8" 1,384 5,000 8" $24,355 $25,755 $29,535 $1,300 4 $7,105 24' 7" 1,705 6,000 8" $29,570 $31,380 $34,660 $1,300 4 $7,105 29' 6" 1,930 8' Diameter 6,000 8" $28,480 $31,615 N/A $750 2 $3,650 19' 5" 2,680 7,000 8" $31,765 $32,320 $36,295 $750 2 $3,650 22' 2" 3,025 8,000 10" $32,555 $34,190 $37,995 $1,500 4 $7,305 24' 11" 3,310 9,000 10" $35,255 $37,810 $42,625 $1,500 4 $7,305 27' 8" 3,580 10,000 10" $36,825 $39,105 $44,025 $1,500 4 $7,305 30' 5" 3,915 12,000 10" $40,040 $42,625 $50,345 $1,500 4 $7,305 35' 11" 4,645 15,000 12" $54,000 $56,515 $62,190 $2,250 6 $10,955 44' 6" 5,551 10' Diameter 20,000 14" $66,965 $68,855 $75,515 $2,430 6 $11,185 37' 5" 6,040 25,000 16" $80,315 $81,965 $88,175 $3,240 8 $14,910 45' 11" 7,295 30,000 16" $85,005 $89,685 $98,700 $3,240 8 $14,910 54' 6" 8,480 35,000 16" $89,685 $99,050 $110,765 $3,240 8 $14,910 62' 8" 10,000 40,000 20" $96,710 $106,085 $122,465 $4, $18,640 71' 3" 11,400 Flanged Inlet Pipe Vent Fitting 2" Vent 22" Manway Vent Fitting 22" Manway 22" Manway Vent Fitting 2" Vent Flanged Outlet Pipe Sludge Baffle Striker Plates 16

17 TANK MOUNTED ACCESSORIES Manways & Extensions (Fig. 1-2) 22" 30" 36" Double-Wall Tank Manway [1] (Fig. 1) $2,950 $5,745 $10,650 Manway Extensions [2] (Carbon Steel Hardware) (Fig. 2) $1,795 $4,680 $7,425 Manway Extensions - SS [2] (304 Stainless Steel Hardware) $1,870 $5, Manway Extension additional length per foot $490 $1,440 $2,175 Fig. 1 Fig. 2 Manway Accessories (Fig. 3-4) Carbon Steel Manway Cover (blind) (Fig. 3) $495 $1,080 $1,345 Bolts, Nuts, Washers & Gaskets $290 $385 $ Stainless Steel Manway Cover (blind) (Fig. 3) $1,585 $2, Bolts, Nuts & Washers for Stainless Steel Lid $325 $ EPDM or Teflon Gasket for Stainless Steel Lid $290 $ Stainless Steel Bolt Rings (Supplied in 2 Halves) (Fig. 4) $935 $1, Manway Fittings - NPT Couplings (Fig. 5) 2" 4" 6" 8" HALF Coupling - Carbon Steel --- $370 $710 $1,235 HALF Coupling Stainless Steel $360 $530 $1,410 $1,955 FULL Coupling - Carbon Steel $495 $525 $950 $1,635 FULL Coupling Stainless Steel $510 $840 $2,045 $2,855 Fig. 3 Fig. 4 Fig. 5 Tank Mounted Fittings [3] (Fig. 6) 4" 6" 8" HALF coupling fitting Carbon Steel $965 $1,435 $2,410 HALF coupling fitting 304 Stainless Steel $1,430 $2,335 $4,355 HALF coupling fitting Fiberglass $1,085 $1, Fig. 6 Double NPT Couplings [3] (Fig. 7) Unit Price 4" HALF coupling fitting Carbon Steel $1,750 Fig. 7 4" FULL coupling fitting Carbon Steel $2,445 Fig. 8 Fiberglass Flanged and Plate Gusseted Nozzles [4][5] (Fig. 8) 2" nozzle $1,615 4" nozzle $2,065 6" nozzle $2,475 8" nozzle $3,460 10" nozzle $3,620 Notes: [1] Manway price includes a deflector plate, steel lid and hardware. [2] Manway extensions include nuts, bolts, washers and gasket. [3] Includes deflector plate. [4] Includes deflector plate (top center line only). [5] Will support 400 lbs. 17

18 MISCELLANEOUS ACCESSORIES Ladders (Fig. 9) 4' Tank 6' Tank 8' Tank 10' Tank 12' Tank Carbon Steel $1,490 $1,555 $1,570 $1,680 $1,805 Aluminum $1,675 $1,975 $2,305 $2,885 $3,405 Fiberglass [6] $1,675 $1,975 $2,305 $2,885 $3, Stainless Steel $1,675 $1,975 $2,305 $2,885 $3,795 Fig. 9 Heating Coil [7] (Fig. 10) Helical Heating Coil --- $6,790 $6,985 $7,155 $7,340 Fig. 10 Tank Bottom Sumps (Fig. 11) Unit Price 8" diameter x 4" depth $3,250 Additional Deflector Plates (Fig. 12) Carbon Steel Stainless Steel 12" x 12" $250 $370 24" x 24" $685 $1,005 Fig. 11 Tank Identification Tags (Fig. 13) Tank Tag $290 Optional cement casing $290 Fig. 12 Unattached Riser [8] (Fig. 14) 48" diameter x 42" Length (L dimension) $1,495 Extra length / ft. (extended L dimension) $295 Fig. 14 Additional Accessories (Fig ) Size Unit Price Secondary FRP containment fitting, tank mounted [9] (Fig. 15) 6" $1,100 Reducer Bushings (Fig. 16) 4" x 1" x 1" $275 4" x 2" $275 6" x 4" $275 Extra tank mounted lift lug (Fig. 17) 4', 6', 8' tanks $340 10' tanks $475 Extra lift lug plug [10] (Fig. 18) 4' tanks only $475 Fig. 15 Fig. 16 Crating / Drop Off / Pick Ups Unit Price Skid charge (2,500 gallon capacity and smaller) $665 Customer pick up $260 Nylon straps (export, minimum of 2) $305 UPS accessory shipment $140 Double-wall annular space vacuum gauge $220 Fig. 17 Fig. 18 Notes: [6] NOT UL approved - must be field installed. [7] Includes manway cover with suction and return lines. [8] Includes 24" x 24" square opening in top. [9] Does not include primary tank fitting. [10] Only available for 4' diameter tanks, includes 4" NPT coupling fitting and deflector plate. 18

19 ROUND SINGLE-WALL TANK SUMPS Round single-wall tank sumps include a sump lid, enclosure top, round sump body and AD kit(s). Watertight sumps include a watertight lid and two (2) AD kits which are used to easily bond sump parts by way of adhesive channels. Sump opening dimensions reflect the outer diameter of the sump lid, the accessible opening of the sump is smaller in diameter or 48 Diameter 48 or 54 Diameter 34 Opening Watertight Sump 40 Opening Watertight Sump 34 OPENING 40 OPENING FRICTION FIT WATERTIGHT FRICTION FIT WATERTIGHT 42" Diameter 3' $1,925 $4, ' $2,160 $4, ' $2,305 $4, ' $2,490 $4, ' $2,845 $5, " Diameter 3' $2,160 $5,245 $2,700 $5,630 4' $2,535 $5,505 $3,170 $5,915 5' $2,745 $5,735 $3,435 $6,165 6' $2,975 $5,955 $3,500 $6,405 7' $3,250 $6,130 $4,065 $6,590 54" Diameter 3' $3,535 $7,065 4' $3,980 $7,415 5' $4,410 $7,755 6' $4,835 $8,035 7' $5,270 $8,270 19

20 POLYGON SINGLE-WALL TANK SUMPS Polygon single-wall tank sumps include a sump lid, enclosure top, 8 panel polygon body, and (2) AD kits. The flat panels on the polygon body allow for 45 and 90 penetration fittings. Single-Wall polygon sumps utilize adhesive channels for easier field bonding. Sump opening dimensions reflect the outer diameter of the sump lid, the accessible opening of the sump is smaller in diameter or 48 Diameter 48 or 54 Diameter 34 Opening Watertight Sump 40 Opening Watertight Sump 34 OPENING 40 OPENING FRICTION FIT WATERTIGHT FRICTION FIT WATERTIGHT 42" Diameter 3' (SBS) [1] $4,080 $5, ' $4,095 $5, ' $4,455 $5, ' $4,805 $5, ' $5,160 $6, " Diameter 3' (SBS) [1] $4,445 $5,735 $5,560 $6,165 4' $4,465 $5,780 $5,580 $6,215 5' $4,880 $6,220 $6,090 $6,685 6' $5,285 $6,635 $6,610 $7,125 7' $5,690 $7,170 $7,110 $7,700 54" Diameter 4' $6,445 $7,960 5' $6,880 $8,395 6' $7,315 $8,935 7' $7,740 $9, Notes: [1] Shallow Bury Sump (SBS)

21 POLYGON DOUBLE-WALL TANK SUMPS All double-wall sumps include a watertight lid and integral reservoir for interstitial space monitoring. Sumps are shipped in multiple pieces and require field assembly to install properly. There are two (2) double-wall sump models and three (3) diameters available for each. One (1) MFFK is shipped with each order for brine filling. All prices and models are based on brine filled sumps. EZ-FIT MODEL DW SUMP The EZ-Fit tanks sump (AD model) features EZ-Fit adhesive channels for easier field bonding. 42 and 48 EZ-Fit sump prices include (4) AD kits, 54 EZ-Fit sump prices include (6) AD kits. This sump is eligible for the 30-year HydroGuard warranty when purchased with a CSI double-wall hydrostatically monitored tank. BASIC LK DW SUMP The LK sump (LK model) relies on field bonded butt joints by means of glass and resin lay-ups. 42 and 48 sump prices include (4) LK kits, 54 sump prices include (6) LK kits or 48 Diameter 48 or 54 Diameter 34 Opening EZ-Fit Sump 40 Opening EZ-Fit Sump 34 OPENING 40 OPENING EZ-Fit (AD) LK Model EZ-Fit (AD) LK Model 42" Diameter 4' $14,790 $13, ' $15,255 $14, ' $15,785 $14, ' $16,235 $14, " Diameter 4' $15,860 $14,830 $16,225 $15,265 5' $16,360 $15,140 $16,720 $15,780 6' $16,920 $15,585 $17,295 $16,365 7' $17,420 $16,025 $17,800 $16,875 54" Diameter 4' $17,500 $17,825 5' $18,690 $18,995 6' $19,825 $19,315 7' $21,030 $20,370 21

22 TANK SUMP ACCESSORIES Flat Bottom Round FBS 42" or 48" [1][2] 42" Dia. 48" Dia. Single-Wall Sump Adder $1,420 $1,525 Fig. 1 Flat Bottom Polygon FBS 42" or 48" [1][2] Single-Wall Sump Adder $1,420 $1,525 Double-Wall Sump Adder $1,490 $1,590 SW Watertight Tank Sump Parts (WT34) Sump Top $1,355 $1,530 (WT34) Gasket $135 $135 (WT40) Gasket $175 $175 Fig. 2 SW Friction Fit Tank Sump Parts (FF34) Sump Top $530 $700 Fig. 3 Secondary Containment Collar (Fig. 1) Single-Wall Double-Wall 42" Diameter Collar - 6" $1,795 $2,175 42" Diameter Collar - 14" [3] $2, " Diameter Collar - 6" $2,170 $2,405 48" Diameter Collar - 14" [3] $2, " Diameter Collar - 6" $3,655 $3,820 Fig. 4 Collar Strap Channel [4][5] (Fig.2) Unit Price Single-Wall Strap Channel - 42" Collar $905 Single-Wall Strap Channel - 48" Collar $1,025 Turbine Lid (Fig. 3) Turbine Lid for 34" opening (WT or FF sump) $670 Turbine Lid for 40" opening (WT or FF sump) $810 Fig. 5 Fill Vapor Lid (Fig. 4) FV 2/15/16 (15" cuffs) [6] $670 FV 2/13/16 (13" cuffs) [6] $670 Quad Fill (4 cuffs) [7] $1,330 Factory Installed Inspection Port (Fig. 5) INS4-4" Watertight Port $490 INS6-6" Watertight Port $520 Notes: [1] Select Desired Tank Sump first, then add sump bottom price. Tank Mounted Adapters are supplied by others. [2] Flat Bottom Sumps may also be used as Transition Sumps. [3] Additional delivery charges apply. [4] Strap channel required when hold down strap intersects collar. [5] Split Strap will not fit inside containment collar. [6] Available for tank sumps with 34" openings only. [7] Available for tank sumps with 40 openings only. 22

23 TANK SUMP ACCESSORIES Kits for Joining Sump Components [8] Unit Price KIT LK - for Layups $410 KIT AD - for Adhesive Channels $410 Fig. 6 Monitoring Fluid Fill Kit Monitoring Fluid 5 Gallon Brine Bucket $40 5 Gallon Propylene Glycol Bucket $120 Fig. 7 Monitoring Fluid Fill Kit for Fill DW Tank Sumps (Fig. 6) MFFK $275 Test / Drain Fitting (Fig. 7) Collar Fitting $165 Fig. 8 Field Installed Inspection Port Kits [8] (Fig. 8) KIT-INS4 Includes 4" Watertight Port $490 KIT-INS6 Includes 6" Watertight Port $520 23

24 DEADMAN ANCHORING TANK CAPACITY (GALLONS) # & SIZE OF DEADMEN DEADMEN PRICE STANDARD STRAPS TURNBUCKLES [1] SPLIT STRAP ASSEMBLY # REQ. PRICE # REQ. PRICE PRICE 40,000 (8) - 18' LP $16,045 (10) $4,050 (20) $7,400 $24,750 35,000 (2) - 18' LP & (4) - 22' LP $12,690 (8) $3,240 (16) $5,920 $19,940 30,000 (6) - 18' LP $12,035 (8) $3,240 (16) $5,920 $19, ,000 (4) - 14' LP & (2) - 18' LP $11,270 (8) $3,240 (16) $5,920 $19,940 20,000 (4) - 18' LP $8,020 (6) $2,430 (12) $4,440 $15,135 15,000 (4) - 14' LP $7,260 (4) $1,620 (8) $2,960 $10,330 12,000 (2) - 22' LP $4,340 (4) $1,620 (8) $2,960 $10,330 10,000 (2) - 18' LP $4,010 (3) $1,215 (6) $2,220 $7, ,000 (2) - 12' & (4) - 16' $7,915 (6) $2,255 (12) $3,540 $14,905 12,000 (4) - 18' $6,215 (4) $1,500 (8) $2,360 $10,175 10,000 (4) - 16' $5,605 (4) $1,500 (8) $2,360 $10,175 8,000 (4) - 12' $4,620 (4) $1,500 (8) $2,360 $10,175 6,000 (2) - 18' $3,105 (2) $750 (4) $1,180 $5,445 5,000 (2) - 16' $2,800 (2) $750 (4) $1,180 $5,445 6,000 (4) - 14' LP $7,260 (4) $1,310 (8) $2,000 $9, ,000 (2) - 22' LP $4,340 (4) $1,310 (8) $2,000 $9,695 4,000 (2) - 18' LP $4,010 (2) $655 (4) $1,000 $5,205 3,000 (2) - 14' LP $3,630 (2) $655 (4) $1,000 $5,205 2,500 (2) - 14' LP $3,630 (2) $655 (4) $1,000 $5, ,000 (2) - 14' LP $3,630 (2) $ (2) - 14' LP $3,630 (2) $ STRAPS Standard Strap Split Strap 4' Diameter $ ' Diameter $325 $1,695 8' Diameter $375 $1,740 10' Diameter $405 $1,775 TURNBUCKLES (TB) Model Price 6' Diameter TB3406 $250 8' Diameter TB3409 $295 10' Diameter TB3418 $370 INDIVIDUAL DEADMAN PRICES 12' L 14' L 16' L 18' L 20' L 22' L 12" x 12" $1, $1,400 $1,555 $1, " x 8" (LP) ---- $1, $2, $2,170 LP = Low Profile 24 [1] Note: 6 diameter tanks where deadmen are buried 12 below tank bottom, call your CSI inside sales representative for alternate turnbuckles and pricing.

25 OIL STOP VALVES Valve Size Diameter Valve Weight (lbs) Epoxy Coated Steel Stainless Steel Minimum Manway Size 4" 100 $7,530 $13,495 22" 6" 120 $8,755 $16,480 22" 8" 200 $9,565 $20,005 22" 10" 380 $10,725 $23,365 30" 12" 500 $12,630 $28,000 30" 14" 600 $15,365 $32,720 36" PRICE INCLUDES: One 4" NPT half coupling installed at tank top for valve relief (cable included on valve). One 16" x 16" fiberglass pump platform installed at tank bottom. One fiberglass flanged internal down pipe attached to fiberglass outlet pipe. All nuts, bolts, washers, and gaskets required for mounting of Oil Stop Valve in tank. Oil Stop Valves of 8" diameter and less will be installed at the factory and shipped complete to the jobsite. Oil Stop Valves of 10" diameter and greater will be shipped separate and must be installed at the jobsite by the contractor. Package will include all nuts, bolts, washers, and gasket to mount the Oil Stop Valve to the fiberglass internal down pipe and the pump platform. Oil Stop Valve will be fitted for installation only with all holes drilled and aligned for mounting to pump platform and outlet pipe flange. PRICE DOES NOT INCLUDE: Fiberglass tangential flanged outlet nozzle installed in tank that penetrates the shell wall. Any manways or additional accessories installed on the tank. It is important to note the minimum manway size for each Stop Valve. This minimum size will allow extraction or installation of the valve in the future should it be required for maintenance. Oil Stop Valve Typical Illustration Installation of an Oil Stop Valve may affect the spill capacity volume of a tank. Contact a CSI Representative for additional information. Oil Stop Valve Double-Wall Oil / Water Separator 25

26 DROP-OUT BOX / CATCH BASIN (Price includes two 4" SDR35 pipe stubs for Drop-Out Box and one 4" SDR35 pipe stub for Catch Basin) Diameter Total Depth Unit Actual Length 4" Inlet / Outlet Pipe Invert Up From Bottom Storage Drop-Out Box Price Catch Basin Price 42" 4' 3' 1' 72 $1,980 $1,835 42" 5' 4' 2' 144 $2,110 $1,915 42" 6' 5' 3' 216 $2,235 $2,025 42" 7' 6' 4' 252 $2,360 $2,175 48" 4' 3' 1' 94 $2,175 $1,945 48" 5' 4' 2' 188 $2,275 $2,065 48" 6' 5' 3' 282 $2,410 $2,195 48" 7' 6' 4' 376 $2,510 $2,290 NOTES: Fiberglass units are designed for AASHTO HS-20 axle load rating and meet or exceed the requirements of ASTM D3753 (Glass Fiber Reinforced Manholes) Total length is measured from fiberglass bottom to finished grade. Actual unit length is 1' less to account for concrete adjustment rings and cast iron ring and cover. Inlet & Outlet pipe are measured from the fiberglass bottom upward to the invert elevation. Storage is the storage capacity in gallons below the inlet and outlet connections. Inlet and outlet connections are standard SDR35 PVC plain end pipe. Schedule 40 PVC can be installed at same cost as SDR35 PVC pipe. Optional top opening of 31.75" is available for both 42" and 48" diameter units. Contact your Sales Representative for pricing and availability. Models are available as Drop-Out Box (inlet and outlet) or Catch Basin (outlet only). Catch basins and Drop-out manholes have factory installed fiberglass watertight bottoms. Freight charges are not included in pricing. Adder for Optional Inlet & Outlet Pipe (Plain End) Diameter Price (Each) 6" $130 8" $130 12" $255 14" $385 15" or 16" $505 Catch Basin Typical Illustration Catch Basin Drop-Out Box 26

27 FLUID ELECTRONICS CONTROL PANEL CONTROL PANEL OPTIONAL EQUIPMENT TANK 1 TANK 2 TANK 3 TANK 4 HIGH HIGH HIGH HIGH MODEL CPF-4 RESET TEST Model Unit Price* CPF 1 (1 switch) $1,150 CPF 2 (1-2 switches) $1,405 CPF 3 (1-3 switches) $2,055 CPF 4 (1-4 switches) $2,305 Alarm Panel Unit Model Unit Price* Auto horn silence control CPF1 ASC $340 CPF2 ASC $340 CPF3 ASC $340 CPF4 ASC $340 * Float switches not included. Use FHLS 300, FOWS 400, FOWS 500, FOVF 600,FCBS 700, FDAS 710, or FHRB 810 float switches. NEMA 4 rated (indoors or outdoors) * Add to CPF Control Panel SENSORS FLOAT SWITCHES SINGLE-POINT OIL/WATER SEPARATOR FLOAT SWITCHES TRIPLE POINT OIL/WATER SEPARATOR Model Unit Price* FOWS 40U - B (for all dia. tanks) $700 FOWS 40U - S (for all dia. tanks) $955 B - Brass stem; S - Stainless steel stem Model Unit Price* FOWS 60U - B (for all dia. tanks) $1,285 FOWS 60U - S (for all dia. tanks) $1,610 B - Brass stem; S - Stainless steel stem * Includes single float switch w/ 10' cable, 2" double tap bushing and explosion proof junction box. Items not assembled as unit. Alarms at oil pump-out level. * Includes triple float switch w/ 10' cable, 2" double tap bushing and explosion proof junction box. Items not assembled as unit. FLOAT SWITCHES DUAL POINT OIL/WATER SEPARATOR Model Unit Price* FOWS 50U - B (for all dia. tanks) $845 FOWS 50U - S (for all dia. tanks) $1,220 B - Brass stem; S - Stainless steel stem * Includes dual float switch w/ 10' cable, 2" double tap bushing and explosion proof junction box. Items not assembled as unit. COLLARS, BULKHEADS, SUMPS, DRY ANNULUS DRY ANNULUS SENSOR Model Unit Price FCBS 700 $390 Model Unit Price FDAS 710 $390 27

28 FLUID ELECTRONICS (continued) SENSORS FLOAT SWITCHES DUAL POINT 95% HIGH AND 20% LOW LEVEL Model Tank Diameter B - Brass stem; S - Stainless steel stem For use with CPF control panels. Unit Price FHLS B 4' $1,015 FHLS S 4' $1,290 FHLS B 6' $1,105 FHLS S 6' $1,435 FHLS B 8' $1,205 FHLS S 8' $1,565 FHLS B 10' $1,340 FHLS S 10' $1,805 FHLS B 12' $1,475 FHLS S 12' $2,055 FLOAT SWITCH DUAL POINT HYDROSTATIC RESERVOIR Model Unit Price* FHRB 810 $640 FLOAT SWITCHES SINGLE- POINT OVERFILL ALARM Model Unit Price* FOVF B $425 FOVF S $560 B - Brass stem; S - Stainless steel stem OPTIONAL EQUIPMENT FOR SWITCHES, SENSORS, & PROBES For Switches, Sensors & Probes Model Dimensions Double tap bushing (NPT Galvanized) Explosion Proof Junction Box (NPT) Unit Price DTB 2G ½"x½"x2" $110 EPJ 3 ½" x ½" $195 * Includes riser cap SPRC 4 For use with CPF control panels. FLUID ELECTRONICS RETURN MATERIAL POLICY RESTOCKING CHARGES: 25% of SALE PRICE CSI accepts return on STANDARD equipment only. Special order equipment will not be accepted for return. All standard equipment must be new and unused in original cartons and returned within 60 days of shipment. RETURN MATERIAL AUTHORIZATION NUMBER In order to expedited returned material, an authorization number MUST be issued by CSI's customer service department and the unit returned to CSI within 14 days after the number has been issued. The following information must be sent with all returned equipment: Customer Purchase Order Number. CSI's Return Material Number (RMA), printed on the OUTSIDE of the shipping carton. CSI's original invoice number. List of items returned. Number of cartons returned. Reason for return All shipments must be sent back FREIGHT PREPAID by the shipper. Our shipping department will refuse any shipments sent collect. This will result in delays in processing the returned material and additional cost to the shipper. 28

29 AOWS MODEL - ABOVEGROUND STEEL OIL / WATER SEPARATOR Model Flow Rate (GPM) Nominal Oil Storage Single-Wall (10 ppm Effluent Quality) Oil Spill Inlet / Outlet Size List Price Dimensions (L x W x H) AOWS " / 2" $9,200 4' 1" x 2' 1" x 3' 4" 625 AOWS " / 3" $11,550 6' 1" x 2' 1" x 3' 5' 775 Nominal Weight (lbs) AOWS " / 4" $15,055 7' 7" x 3' 1" x 3' 4" 1,225 AOWS " / 4" $18,400 10' 1" x 3' 7" x 3' 4" 2,100 AOWS , " / 6" $23,255 11' 1" x 3' 7" x 4' 4" 2,675 AOWS , ,350 6" / 6" $25,855 10' 3" x 5' 1" x 4' 4" 3,025 AOWS , ,800 8" / 8" $30,935 16' 9" x 4' 1" x 4' 4" 4,200 AOWS , ,250 8" / 8" $36,805 17' 1" x 5' 1" x 4' 4" 4,475 Model Flow Rate (GPM) Nominal Oil Storage Double-Wall (10 ppm Effluent Quality) Oil Spill Inlet / Outlet Size List Price Dimensions (L x W x H) Nominal Weight (lbs) AOWS " / 2" $10,875 4' 10" x 2' 3" x 3' 7" 1,100 AOWS " / 3" $13,800 6' 10" x 2' 3" x 3' 7" 1,400 AOWS " / 4" $20,080 8' 4" x 3' 3" x 3' 7" 2,125 AOWS " / 4" $23,255 10' 10" x 3' 9" x 3' 7" 3,350 AOWS , " / 6" $27,600 11' 10" x 3' 9" x 4' 7" 4,475 AOWS , ,350 6" / 6" $31,380 11' 1" x 5' 3" x 4' 7" 5,450 AOWS , ,800 8" / 8" $44,470 17' 6" x 4' 3" x 4' 7" 7,025 AOWS , ,250 8" / 8" $54,825 17' 6" x 5' 3" x 4' 7" 8,025 NOTES: List price includes skid-mounted separator with removable coalescer plates, removable top, epoxy internal liner, external epoxy coating, inlet and outlet fittings, three 2" fittings (oil draw, vent and sensor). Double-Wall Tank has a Single-Wall Lid Desert Sand Epoxy exterior finish standard on all tanks. Black epoxy interior finish standard on all tanks. Emergency spill capacity is 90% of the tank volume based on no accumulated oil in vessel at time of spill. Elevation Right Side 29

30 RESET HIGH MODEL CPF-1 TEST ABOVEGROUND STEEL OIL / WATER SEPARATOR PUMP VALVE & PANEL PACKAGE Model Flow Rate (GPM) Pump, Valve & Panel Package (10 ppm Effluent Quality) Inlet / Outlet Size Single-Wall Package List Price Double-Wall Package AOWS " / 2" $10,055 $10,555 AOWS " / 3" $10,355 $10,680 AOWS " / 4" $12,570 $13,195 AOWS " / 4" $12,750 $13,380 AOWS " / 6" $14,335 $14,960 AOWS " / 6" $14,490 $15,120 AOWS " / 8" $19,090 $19,380 AOWS " / 8" $19,480 $20,110 PACKAGE CONTENTS: (DOES NOT INCLUDE TANK) (1) NEMA 4 Simplex Control Panel (1) Filter Regulator Kit -- 1 Control Circuit -- Filter Regulator -- 1 H-O-A Selector Switch -- Gauge -- 1 Relay (2) Pole -- Pipe Nipple Terminals -- 5' Flexible Hose -- 1 Ground Bar (1) Aero Air Operated Diaphragm Pump (2) A2-3M Liquid Level sensors -- Sized for 10' Total Dynamic Head (TDH) (1) ¼" Solenoid Valve, 110 VAC, open, spring return -- Inlet and Outlet sized same as OWS tank (1) ½" Conduit Connector -- Air pressure requirement: 40 to 120 ps (2) ¼" Mufflers for Valve (1) NEMA 4 Control Panel For Oil Sensor (CPF 1) (1) Cable Holder (stainless steel) (1) Single Float Oil Interface Sensor (1) Foot Valve / Strainer Note: This package does not include collection sump(s) or any associated piping or freight. Double-Wall Package Notes: Double-Wall tank package price includes CPF 2 control panel with an annular space sensor (FCBS700). Pump Valve & Panel System Typical Illustration F H A H-O-A E D C G A Aboveground Oil/Water Separator E Nema 4 Simplex Control Panel B Fiberglass Collection Sump (optional) F Control Panel for Oil Sensor 30 B C Air Operated Diaphragm Pump G Inlet Pipe D Coalescer Pack H Oil Removal Fitting

31 MOP-UP MODEL - ABOVEGROUND OIL / WATER SEPARATOR Model Nominal Dimension of Unit Length Width Height Flow Rate (gpm) Oil Storage Oil Spill * Inlet / Outlet Nozzle Weight (lbs.) List Price MOP " 18" 29" " / 1" 410 $4,430 MOP " 18" 29" " / 1" 590 $5,010 MOP " 29" 29" " / 2" 705 $6,165 MOP " 29" 29" " / 2" 790 $6,725 * Emergency spill capacity is 80% of the tank volume based on no accumulated oil in vessel at time of spill FEATURES: (1) Superior CSI quality and workmanship. (2) Rugged steel construction. (3) Interior black epoxy coating (4) Exterior desert sand epoxy coating (5) Removable top with large easy to grip knobs and handles for easy removal; removable non-metallic coalescer(s). (6) Oil pump out pipe with 2" cam lock fitting. (7) Top fittings for vent, oil draw off, and gauge. (8) Influent Fill Box with a 2" threaded coupling drain in the bottom. (9) Fill Box can be positioned on either side or at the end of the unit and adds 18" to the length of the unit. OPTIONS: (1) Casters on unit for mobility (add 7" to height of unit) List price for casters on unit: $390 (2) Oil level sensing systems with electronic panels Refer to Fluid Electronics page (3) Double wall construction (tank dimensions approx. 2" wider and 6" longer than single wall) Consult your Sales Representative for pricing Elevation Right Side (with Fill Box Removed) 31

32 333 North Rivershire Drive, Suite 190 Conroe, Texas Tel: (936) Fax: (936) Containment Solutions, Inc. All Rights Reserved. Pub. No. FCI 11015H