Pipe Hangers, Strut & Accessories

Transcription

1 I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone Fax Olcott Street Manchester, CT w w w. e m p i r e i n d u s t r i e s. c o m

2

3 Filling industry's needs for pipe hangers, supports, strut, custom fabrication and metal stampings. Stocking stainless steel hangers, strut and accessories in Type 304 and Type 316. Offering same day shipping for truck and air freight shipments. Shipping material packaged and tagged per the customer's instructions. Offering order transactions via EDI technology. Coatings and finishes include: Electro-galvanizing (EG) Hot dip galvanizing (HDG) Copper plating (CT) Chrome plating (CR) Plastic coating (PC) Red primer painting (RP) Epoxy Coating (EC) Copper-Gard (CG) Current list price discount: Multiplier: Local Sales Representative: Factory contact: USA Local Fax

4 TERMS OF SALE AGREEMENTS: All agreements are subject to strikes, accidents or other causes beyond our control. Prices and designs are subject to change without notice. TAXES: The buyer is liable for any Federal or State taxes imposed on the seller. WARRANTY: We guarantee to replace, or at our option, to repair any material which we find in our sole discretion to be defective in material or workmanship provided that a claim and proof thereof is made in writing to us within thirty (30) days after purchaser's receipt thereof. In no event shall we be liable for transportation to or from our factory, installation, adjustments or any expenses or damages which may arise in loss of use, and the foregoing shall be the purchaser's sole remedy hereunder. No other warranty or guarantee of any kind is made, express or implied. Products sold but not manufactured by Empire are not warranted by Empire; however, to the extent possible, Empire will pass through to the purchaser any supplier's warranty. CLAIMS: No claims for shortages allowed unless made in writing within ten (10) days of goods. All material sent out will be carefully counted and packed. Claims for goods damaged or lost in transit should be made on the carrier as our responsibility ceases on delivery to the carrier. LIABILITY FOR MISUSE: We shall not be liable for damages to property or persons due to improper installation of our material or through attempts to utilize the material under conditions which exceed the designed capabilities. Purchaser agrees to indemnify and hold us harmless from any and all claims, liabilities, damages, costs, and expenses asserted against us or incurred by us because of injuries to persons or damages to property resulting from the improper installations or misuse of the material. RETURNS: Permission to return standard stocked merchandise must be obtained in writing. Credit will be issued subject to the following: 1. Return freight charges must be prepaid. 2. All material must be in first-class condition on arrival at our plant; if not, reconditioning costs will deducted from the credit memo. 3. Return good authorizations (RGA s) will require a signed, authorized RGA form from the the party returning the material. Any terms that deviate from the signed RGA form will be deducted from the credit, or shipment may be refused. 4. Credit will be allowed on the basis of the price charged less a minimum handling charge of 25%, and less any out-bound freight allowed or paid by us. SPECIAL ORDERS: Orders quoted special with non-standard material are not subject to cancellation or return unless such terms are agreed upon. MINIMUM INVOICE: $50.00 plus transportation. TERMS: 1% 15 days - Net 30 days. INTEREST CHARGE: Any amount not paid timely by the customer shall bear interest at the maximum rate permitted by law, not to exceed 1 1/2% per month. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. Full freight allowed orders are negotiated on a regional basis. Contact your local manufacturers representative or the factory direct. PROTECTIVE COATINGS: NET PRICE/CWT Hot Dip Galvanizing $90.00 (Minimum charges by piece or Electro-galvanizing (Zinc and Copper) $80.00 by weight may apply for Painting (Red Primer - one coat) $80.00 all coatings)

5 Version CI ADJUSTABLE CLEVIS HANGER Ordering: Specify pipe size, figure number and finish Note: Specify EG for (Electro-Galvanized) or HDG for (Hot Dip Galvanized) when ordering product UL approved on sizes 2-1/2-8. FM approved on sizes 3/4-8 Pipe Price/Each Std. Wgt./ Pipe Price/Ea c h Std. Wgt./ Size Plain E G HDG Pkg. Each Size Plain E G HDG Pkg. Each 1/ / / Bulk / Bulk POA Bulk / POA Bulk POA Bulk / POA Bulk POA Bulk POA Bulk CLEVIS HANGER FOR DUCTILE IRON and PVC C-900 PIPE Ordering: Specify pipe size, figure number and finish Note: Also available in 304 and 316 stainless steel *SEE PAGE 30 FOR LIGHTWEIGHT CLEVIS #110 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain HDG Pkg. Each Size Plain E G HDG Pkg. Each POA POA Bulk POA POA Bulk POA POA Bulk POA POA Bulk Bulk POA POA Bulk Bulk GI ADJUSTABLE CLEVIS HANGER Material: Electro-galvanized carbon steel - Imported Ordering: Specify pipe size, figure number Note: UL approved on sizes 2-1/2-4. FM approved on sizes 3/4-4 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/ / / / /

6 - 2- Version F CLEVIS HANGER, FLAT TOP Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each / / SS-TYPE SX-TYPE 316 CLEVIS HANGER STAINLESS STEEL Material: Ordering: Note: Stainless steel Specify pipe size and stainless steel type Larger pipe sizes are PRICED ON APPLICATION Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size T-304 T-316 Each Size T-304 T-316 Each 1/ / / / / V CLEVIS HANGER, V-BOTTOM Ordering: Specify size number and figure number Size Pipe Price/Each Wgt./ No. Size Plain E G Each 1 1/ /

7 Version WS CLEVIS HANGER WITH WELDED SHIELD Material: Ordering: Note: Carbon steel with welded galvanized shield Specify hanger size and figure number To calculate proper size, add the thickness of the insulation times 2, plus the O.D. of the pipe Hanger Price/Each Shield Wgt./ Hanger Price/Each Shield Wgt./ Size Plain I.D. Each Size Plain I.D. Each 1 1/ / / / / / / / / / / / / / X CLEVIS HANGER with EXTENDED BOTTOM Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 1/ / / / Bulk / Bulk V-SUPPORT TROUGH Material: Pregalvanized carbon steel (10 lengths) Ordering: Specify size number and figure number Size Pipe Price/Each Wgt./ No. Size E G Each 1 1/ /

8 - 4- Version WELDLESS EYE NUT Material: Forged steel Ordering: Specify rod size, figure number and finish Note: Specify figure number 13-L for left-hand thread Stainless steel also available and priced on application Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/8 POA POA POA POA /2 POA POA /8 POA POA /8 POA POA /4 POA POA /4 POA POA /2 POA POA /8 POA POA /4 POA POA Bulk I WELDLESS EYE NUT Material: Forged steel-imported Ordering: Specify rod size, figure number and finish Note: Hot dip galvanized eye nuts are not tapped oversized Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain HDG Pkg. Each Size Plain HDG Pkg. Each 3/ / / / / / / / C-CLAMP Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY 3/8, 1/2 Note: FM approved 3/8 ONLY Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/ / / / /

9 Version L C-CLAMP with LOCKNUT Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY 3/8, 1/2 Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.) FM approved on size 3/8 Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/ / / / / LI C-CLAMP with LOCKNUT Material: Electro-Galvanized, carbon steel-imported Ordering: Specify rod size, figure number FULL CARTON QUANTITIES ONLY 3/8, 1/2 Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.) FM approved on size 3/8 Size E G Std. Pkg. Wgt/Each 3/ / / / LSS-Type LSX-Type 316 C-CLAMP with LOCKNUT, STAINLESS STEEL Material: Stainless steel Ordering: Specify rod size, figure number and stainless steel type Size Price Each Std. Wgt./ Size Price Each Std. Wgt./ T-304 T-316 Pkg. Each T-304 T-316 Pkg. Each 3/ / / /

10 - 6- Version R C-CLAMP RETAINING STRAP Ordering: Specify length and figure number Note: Use with figure numbers 21L, 3/8-3/4 and 23L, 3/8 and 1/2 Size Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E.G Pkg. Each Plain E.G Pkg. Each 4 1/ R BEAM CLAMP RETAINING STRAP Ordering: Specify rod size, length and figure number Note: Use with figure numbers 61 and 62; 3/8 and 1/2 rod sizes are supplied on the same strap 23L Length Inches DUCTILE IRON C-CLAMP with LOCKNUT Material: Ductile iron Ordering: Specify rod size, figure number and finish Note: UL listed and FM approved on sizes 3/8 and 1/2 Price Each - Plain 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod 7/8 Rod 4 1/ Price/Each Size Plain E G Std. Pkg. Wgt./Each 3/ / / / PURLIN CLAMP Material: Ductile iron Ordering: Specify rod size, figure number and finish Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/

11 Version L EXTENDED C-CLAMP with LOCKNUT Material: Malleable iron Ordering: Specify rod size, figure number and finish Price/ Std. Wgt./ Size Rod Each Pkg. Each 1 3/ Material: Ordering: Note: PLAIN EYE RODS, RIGHT HAND THREAD Carbon steel Specify rod size, length and figure number Eyerods are made to order -- minimum order to be $40.00 net per size Specify figure #26-L for left hand thread - Priced on application (Inches) 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod 7/8 Rod 1 Rod 8-72 PRICE ON APPLICATION 26W Material: Ordering: Note: WELDED EYE RODS, RIGHT HAND THREAD Carbon steel Specify rod size, length and figure number Eyerods are made to order -- minimum order to be $40.00 net per size Specify figure #26-WL for left hand thread - Priced on application Length List Price Each (Inches) 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod 7/8 Rod 1 Rod 8-72 PRICE ON APPLICATION 31 ADJUSTABLE BAND HANGER Ordering: Specify pipe size, figure number and finish Note: If plastic coated hanger is needed order figure #31PC Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G PC Pkg. Each Size Plain E G PC Pkg. Each 3/ / / / / / Bulk / Bulk Bulk 1.64

12 - 8- Version CT Material: Copper plated carbon steel Ordering: Specify tube size, figure number and finish COPPER TUBING ADJUSTABLE BAND HANGER Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/ / / / / / CTI COPPER-GARD COPPER TUBING ADJUSTABLE BAND HANGER Material: Epoxy coated over electro-galvanized carbon steel - Imported Ordering: Specify tube size, figure number and finish Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/ / / / / / SS Material: Ordering: Note: ADJUSTABLE BAND HANGER, STAINLESS STEEL TYPE 304 Stainless steel Specify pipe size and figure number Type 316 also available - Priced on application Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Type 304 Pkg. Each Size Type 304 Pkg. Each 1/ / / / Bulk / Bulk Bulk 1.64

13 Version VIBRATION HANGER: NEOPRENE-IN-SHEAR HANGER Ordering: Specify load, rod size and figure number PRICED ON APPLICATION 35 Ordering: VIBRATION HANGER : SPRING HANGER SERIES SH SPRING FLEX HANGERS Specify load, rod size and figure number PRICE ON APPLICATION 36 VIBRATION HANGER : SPRING HANGER SERIES RSH SPRING FLEX HANGERS Ordering: Specify load, rod size and figure number PRICED ON APPLICATION 37 Material: Electro-galvanized carbon steel Ordering: Specify pipe size, figure number and finish U-BOLTS, LIGHT DUTY LESS NUTS Pipe Rod Price/Ea. Std. Wgt./ Pipe Rod Price/Ea. Std. Wgt./ Size Size E G Pkg. Each Size Size E G Pkg. Each 1/2 1/ / /4 1/ /2 3/ / / /4 1/ / /2 1/ / / / /2 3/

14 Version A HANGER FLANGE (Bolt Thread) Material: Malleable iron Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY ON 3/8 Note: Chrome plated also available - Priced on application Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/8 BT /2 BT ACT COPPER-GARD HANGER FLANGE Material: Epoxy coating over malleable iron Ordering: Specify rod size, figure number FULL CARTON QUANTITIES ONLY ON 3/8 Note: COPPER-GARD products offer far superior corrosion protection Rod Price/Each Std. Wgt./ Size Coated Pkg. Each 3/ / ASB SOLID BRASS HANGER FLANGE Material: Solid brass Ordering: Specify rod size, figure number Note: Solid Brass offers superior corrosion protection Rod Price/Each Std. Wgt./ Size Brass Pkg. Each 3/ ASSI-Type ASXI-Type 316 HANGER FLANGE, STAINLESS STEEL Material: Ordering: Stainless steel Specify rod size and figure number and stainless steel type Rod Price/Each Std. Wgt./ Size T-304 T-316 Pkg. Each 3/ /

15 Version SPLIT RING HANGER (Bolt Thread) Material: Ordering: Note: Malleable iron Specify pipe size, figure number and finish Chrome plated also available - Priced on application Pipe P r i c e/e a c h Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 1/ / /2 Hinge Only Hinge Only Hinge Only Hinge Only / Hinge Only Hinge Only / CT 41CTSB 41H Material: Ordering: COPPER-GARD, COPPER TUBING SPLIT RING HANGER Material: Epoxy coating over electro-galvanized malleable iron Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/ / /2 Hinge Only Hinge Only / Hinge Only / SOLID BRASS, COPPER TUBING SPLIT RING HANGER Material: Solid brass Ordering: Specify rod size, figure number Note: Solid Brass offers superior corrosion protection Tubing Price/Each Std. Wgt./ Size Brass Pkg. Each 1/ / SPLIT RING HANGER (Bolt Thread), HINGE DESIGN Malleable iron Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/ / / / / /

16 HCT COPPER-GARD, COPPER TUBING SPLIT RING HANGER, HINGE DESIGN Material: Epoxy coating over malleable iron Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Version SSI-Type SXI-Type Material: Ordering: 48 49PC Material: Ordering: Note: Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/ / / / / / / Malleable iron Specify rod size, figure number and finish Carbon steel Specify pipe size, figure number and finish If plastic coated hanger is needed order #49PC SPLIT RING HANGER, STAINLESS STEEL Material: Stainless steel Ordering: Specify pipe size, figure number and stainless steel type Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size T-304 T-316 Pkg. Each Size T-304 T-316 Pkg. Each 3/ / / / / / EYE SOCKET Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 1/ / / / / / PLASTIC PIPE RISER CLAMP PLASTIC RISER CLAMP, PLASTIC COATED #48 PLASTIC PIPE RISER CLAMP #49-PC PLASTIC RISER CLAMP, PLASTIC COATED Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plastic Pkg. Each 1 1/ /

17 Version TM Material: Ordering: UV stabilized 6/6 nylon. STRUT-N-ROD - Used for STRUT or THREADED ROD applications. Indicate by selecting part number in far left column followed by P for 3/8 threads of E for 1/4 threads. HANDY-SNAP - Used for surface mounting applications. Indicate by selecting part number in far left column followed by HS for HANDY-SNAP. Strut-N-Rod Box Handy Snap Steel-Plastic Copper Types Refrigeration Electric Electric Electric Stainless Max. Hanger No. E or P Qty HS Sch. 40 & 80 K, L, M & DWV Copper EMT Heavy Wall IMC Steel Tube Load Price Each Price Each /4" 3/8" -1/2 " 1/2" - 5/8" 1/2" /8" 5/8" 3/4" 1/2" 3/4" /2" 3/4" 7/8" 3/4" 1/2" 1/2" /4" 1" 1-1/8" 3/4" 3/4" 1" " 1" 1" 1" 1-1/4" /4" 1-3/8" 1-1/4" 1-1/2" /4" 1-1/2" 1-5/8" 1-1/2" 1-1/4" 1-1/4" /2" 2" 2-1/8" 1-1/2" 1-1/2" 2" " 2" 2" 2" 2-1/2" /2" 2-1/2" 2-5/8" 2-1/2" 2-1/2" 2-1/2" 3" " 3-3 ½" 3-3 ½" 3" 3" 3" 3 ½" /2-4" 4" 4" 4" 4" 4" 4"

18 RISER CLAMP Ordering: Specify pipe size, figure number and finish Note: UL approved on sizes 2-8 Version Pipe P r i c e / E a c h Std. Wgt/ Size Plain E G HDG Pkg Each 1/ / / / / / Bulk Bulk POA Bulk POA Bulk POA Bulk POA Bulk POA Bulk POA Bulk CT RISER CLAMP, COPPER TUBING Material: Ordering: Copper plated carbon steel Specify tube size and figure number Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/ / / / / /

19 Version CTI COPPER-GARD, COPPER TUBING RISER CLAMP Material: Epoxy coating over carbon steel - Imported Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/ / / / / / PC RISER CLAMP, PLASTIC COATED Material: Plastic coated carbon steel Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plastic Coated Each Size Plastic Coated Each 1/ / / / /

20 Version SA RISER CLAMP, SHORT ARM Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 3/ / / / / SS-Type SX-Type 316 RISER CLAMP, STAINLESS STEEL Material: Stainless steel Ordering: Specify pipe size, figure number and stainless steel type Note: Larger sizes are available - Priced on application. Sizes 4, 6, 8, 10 and 12 can be used on SDR 35 sewer pipe. Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size T-304 T-316 Each Size T-304 T-316 Each 1/ / / / / , POA ROD COUPLING Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY ON SIZES 3/8 and 1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 1/ / / Bulk / / Bulk / / Bulk / / Bulk 1.88

21 Version R REDUCING ROD COUPLING Material: Electro-galvanized carbon steel Ordering: Specify rod size and figure number Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 3/8 x 1/ /4 x 5/ /2 x 3/ /8 x 3/ /8 x 1/ x 7/ SS ROD COUPLING, STAINLESS STEEL TYPE 304 Material: Stainless steel Ordering: Specify rod size and figure number Rod Price Wgt./ Rod Price Wgt./ Size Each Each Size Each Each 1/ / / / / / ROUND STEEL WASHER Ordering: Specify pipe size, figure number and finish FULL CARTON QUANTITIES ONLY ON SIZES 1/4-3/4 Size Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Plain E G Pkg. Each 1/ / / / / / / / / BULK BULK FLAT ROUND WASHERS IN 50 LB BOXES Ordering: Specify rod size, figure number and finish Bolt Price/Each Box Std. Bolt Price/Each Box Std. Size Plain E G Pkg. Size Plain E G Pkg. 1/ / / / / /

22 F FENDER WASHERS Version Material: Electro-galvanized carbon steel Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY ON ALL SIZES 52L Size Outside Price/ Std. Wgt./ Diameter Each Pkg. Each 1/4 1 1/ /8 1 1/ / Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITIES ONLY Size LOCK WASHERS Price/Each Std. Wgt./ Plain E G Pkg. Each 3/ / / / SS Material: Stainless steel Ordering: Specify rod size and figure number ROUND STEEL WASHER, STAINLESS STEEL TYPE 304 Rod Price/ Std. Wgt./ Rod Price/ Std. Wgt./ Size Each Pkg. Each Size Each Pkg. Each 3/ / / / / ANGLE BRACKET Ordering: Specify rod size, figure number and finish FULL CARTON QUANTITY ON 3/8 and 1/2 Note: Also available in statinless steel Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/ / / / /

23 Version CONTINUOUS THREADED ROD Ordering: Specify rod size, figure number and finish FULL BUNDLE QUANTITIES ONLY ON SIZES 3/8-3/4 Note: Also available in 10 or 12 lengths Left hand thread, SAE fine thread and B-7 priced on application Rod Price/Ft. Bundle Wgt./ Rod Price/Ft. Wgt./ Size Plain E G Quantities Foot Size Plain E G Foot 1/ / / / / / / / / SS CONTINUOUS THREADED ROD STAINLESS STEEL TYPE 304 Material: Stainless steel Ordering: Specify rod size and figure number Note: Also available in 10 or 12 lengths and Type Priced on application Rod Price/Ft. Wgt./ Rod Price/Ft. Wgt./ Size T-304 Foot Size T-304 Foot 1/ / / / / / COACH SCREW ROD Ordering: Specify rod size, length, figure number and finish FULL CARTON QUANTITIES ONLY Rod Price/Each Std Wgt./ Rod Price/Each Std Wgt./ Size Plain E. G. Pkg. Each Size Plain E. G. Pkg. Each 1/4 x 3 1/ /8 x /8 x 3 1/ /2 x /8 x 4 1/ /2 x /8 x /2 x /8 x /8 x /8 x

24 Version Ordering: Specify rod size, figure number and finish FULL BOX QUANTITIES ONLY STANDARD HEX NUT, PACKAGED Size Price/Each Std. Wgt./ Size Price/Each Std. Wgt./ Plain E G Pkg. Each Plain E G Pkg. Each 1/ / / / / / / / / BULK STANDARD HEX NUT (FULL KEGS ONLY) Ordering: Specify rod size, figure number and finish FULL KEG QUANTITIES ONLY (Keg quantities subject to change) Size Price/Each Keg Std. Wgt./ Size Price/Each Keg Std. Wgt./ Plain E G Pkg./Keg Keg Plain Plated Pkg./Keg Keg 1/ / / / / / H HEAVY HEX NUTS, PACKAGED Ordering: Specify rod size, figure number and finish FULL BOX QUANTITIES ONLY Size Price/Each Std. Wgt./ Price/Each Std. Wgt./ Size Plain E G Pkg. Each Plain E G Pkg. Each 1/ / / / / / / / /

25 Version H BULK HEAVY HEX NUTS (FULL KEGS ONLY) Ordering: Specify rod size, figure number and finish FULL KEG QUANTITIES ONLY (Keg quantities subject to change) Size Price/Each Keg Std. Wgt./ Price/Each Keg Std. Wgt./ Size Plain E G Pkg./Keg Each Plain E G Pkg./Keg Each 1/ / / / / / SS Material: Stainless steel Ordering: Specify rod size and figure number Size Price/Each STANDARD HEX NUTS, STAINLESS STEEL TYPE 304 Std. Wgt./ Size Price/Each Std. Wgt./ Pkg. Each Pkg. Each 3/ / / / / Ordering: Specify rod size, length, figure number and finish HANGER ROD Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain Each Size Plain Each 3/8 x /2 x /8 x 10 Price /2 x 12 Price /8 x 12 On /2 x 18 On /8 x 18 Application /8 x 8 Application /8 x /8 x

26 Version HEX HEAD FLANGE BOLTS, PACKAGED Ordering: Specify bolt diameter, length, figure number and finish Note: Other sizes also available - Priced on application Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 1 1/ / / / / Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 5/8 1 1/ / / / / / / / Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 3/4 Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 7/ / / / x / / / / / / / Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each / / BULK HEX HEAD FLANGE BOLTS, (FULL KEGS ONLY) Ordering: Specify bolt diameter, length, figure number and finish FULL KEG QUANTITIES ONLY. (Keg quantities subject to change) Note: Other sizes also available. Price on application Size Price/Each Std./Pkg. Wgt./ Diameter Length Plain E G Box Each 2 1/ / / /4 3 1/

27 Version Ordering: Specify size, figure number and finish FULL CARTON QUANTITIES ONLY DRIVE SCREW 60 Size Material: Malleable Iron - electro-galvanized Ordering: Specify rod size and figure number FULL CARTON QUANTITIES ONLY Price/Each Std. Wgt./ Plain Pkg. Each #12 x 1 1/ #14 x 1 1/ #16 x /4 BEAM CLAMP 61 Rod Size Price/Each EG Std. Pkg. Wgt./Each 1/ VOLUME PRICING Rod Size Volume Price/EG Volume Quanity Weight Each 1/ TOP BEAM CLAMP Material: Ductile iron Ordering: Specify rod size, figure number and finish Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.). FM approved on size 3/8. FULL CARTON QUANTITIES ONLY ON 3/8 AND 1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/ / / / D Material: Malleable iron Ordering: Specify rod size, figure number and finish Note: UL and FM approved FULL CARTON QUANTITIES ONLY TOP BEAM CLAMP - DOMESTIC Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each 3/ /

28 Version JUNIOR TOP BEAM CLAMP Material: Ductile iron Ordering: Specify rod size, figure number and finish Note: UL approved on sizes 3/8 and 1/2 (1/2 for 4 IPS max.). FM approved on size 3/8. FULL CARTON QUANTITY ON 3/8-1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/ / / / / VOLUME PRICING Rod Volume Volume Weight Size Price/Plain Quanity Each 3/8" /8" (1 skid) D JUNIOR TOP BEAM CLAMP - DOMESTIC Material: Malleable iron Ordering: Specify rod size, figure number and finish Note: UL and FM approved FULL CARTON QUANTITIES ONLY Rod Price/ Each Std. Wgt./ Size Plain E G Pkg. Each 3/ / SS-Type SX-Type 316 JUNIOR TOP BEAM CLAMP STAINLESS STEEL Material: Stainless steel Ordering: Specify rod size and figure number and stainless steel type Rod Price/Each Std. Wgt./ Size T-304 T-316 Pkg. Each 1/ / /

29 Version ELECTRICAL ROD SUPPORT CLAMP Material: Malleable iron - electro-galvanized Ordering: Specify rod size and figure number FULL CARTON QUANTITIES ONLY 66L 66W 67 Rod Price/Each Std. Wgt./ Size E G Pkg. Each 1/ / / / Rod Price/Each Std. Wgt./ Size E G Pkg. Each 1/ WELDING BEAM ATTACHMENT WELDING BEAM ATTACHMENT with BOLT and NUT Ordering: Specify rod size, figure number and finish Note: Also available in stainless steel Rod Price/Each Weight Size LESS Bolt & Nut WITH Bolt & Nut LESS Bolt & Nut WITH Bolt and Nut 3/ / / / / / / / Ordering: Specify rod size, figure number and finish VOLUME PRICING CONCRETE CLEVIS PLATE Rod Wgt./ Rod Wgt./ Price/Each Price/Each Size Each Size Each 3/8 POA POA /2 POA /8 POA /8 POA /4 POA /4 POA /2 POA /8 POA 18.14

30 Version CONCRETE ROD ATTACHMENT Ordering: Specify rod size, figure number and finish Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Each Size Each 3/8 POA POA /2 POA /8 POA /8 POA /4 POA /4 POA /2 POA /8 POA LONG 69 SHORT STRUCTURAL WELDING LUG Ordering: Specify rod size, short or long style, figure number and finish Size Price/Each Wgt./Each Std./ Short Long Short Long Pkg. 1/ Bulk 5/8 POA POA Bulk 3/ Bulk 7/ Bulk 1 POA POA Bulk 1 1/ Bulk 1 1/ Bulk 72 BEVEL WASHER Ordering: Specify rod size, figure number and finish Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size E G Each Size E G Each 3/ / / / /

31 Version DROP-IN ANCHOR Material: Electro-galvanized carbon steel Ordering: Specify rod size and figure number FULL BOX QUANTITIES ONLYON SIZES 3/8 and 1/2 Rod Price/Each Std. Wgt./ Rod Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 3/ / / / HEX LAG SCREW Material: Electro-galvanized carbon steel Ordering: Specify diameter, length and figure number Length 1/4 Diameter 3/8 Diameter 1/2 Diameter 5/8 Diameter Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each 1 1/ / STEEL WASHER Ordering: Specify rod size, figure number and finish 2 x 2 x 1/4 3 x 3 x 1/4 4 x 4 x 1/4 4 x 4 x 3/8 Rod Size Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each Price/Each Wgt./Each Plain Plain Plain Plain 3/ / / / /

32 ANCHOR BOLT Version Ordering: Specify rod size, length, and figure number Length Price/Each 3/8 Rod 1/2 Rod 5/8 Rod 3/4 Rod PRICED ON APPLICATION PRICED ON APPLICATION PRICED ON APPLICATION PRICED ON APPLICATION 80 Ordering: Specify rod size, length, and figure number Note: Priced on application WEDGE ANCHOR 81 CONCRETE INSERT Ordering: Specify figure number and finish Note: Nuts must be ordered separately by rod size INSERT BOX ONLY Price/Each Std. Wgt./ Plain E G Pkg. Each NUTS Price/Each Std. Wgt./ NUTS Price/Each Std. Wgt./ ONLY Plain E G Pkg. Each ONLY Plain E G Pkg. Each 1/ / / / / SPRING WING TOGGLE and BOLT Material: Electo-galvanized carbon steel Ordering: Specify size and figure number FULL BOX QUANTITIES ONLY Size Price/Each Std. Wgt./ Plated Pkg. Each 1/4 x /8 x

33 Version SPRING WING TOGGLE HEAD ONLY Material: Electo-galvanized carbon steel Ordering: Specify size and figure number FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Plated Pkg. Each 1/ / OFFSET PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel and Epoxy coated - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 3/ / / / POA EXTENDED PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel and Epoxy coated - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 3/ / / / POA --

34 Version Ordering: Specify pipe size, figure number and finish ADJUSTABLE CLEVIS HANGER LIGHTWEIGHT Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain E G Pkg. Each Size Plain E G Pkg. Each 3/ / / / / / / CT CLEVIS HANGER, COPPER TUBE SIZE Material: Copper plated carbon steel Ordering: Specify tube size and figure number Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/ / / / / / CTI COPPER-GARD, COPPER TUBE CLEVIS HANGER Material: Epoxy coated over carbon steel - Imported Ordering: Specify tube size and figure number Note: COPPER GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/ / / / / /

35 Version GI Material: Electro-galvanized carbon steel - Imported Ordering: Specify pipe size and figure number ADJUSTABLE CLEVIS HANGER LIGHTWEIGHT Pipe Price Each Std. Wgt./ Pipe Price Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/ / / / / / PC CLEVIS HANGER, PLASTIC COATED Material: Plastic coated carbon steel Ordering: Specify pipe size and figure number Note: Bottom of clevis hanger is plastic coated and top of hanger, nut and bolt are electro-galvanized Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 3/ / / / / / Bulk / Bulk TURNBUCKLE ADJUSTER Material: Malleable iron Ordering: Specify rod size, figure number and finish Rod Price/Each Std. Wgt./ Size Plain Pkg. Each 3/ /

36 Version Material: Electro-galvanized malleable iron Ordering: Specify pipe size and figure number ONE HOLE CLAMP Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/ / / / / CT NATICK HANGER, COPPER TUBE SIZE, COPPER-GARD Material: Epoxy coated over carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/2 x /2 x /4 x /4 x x x /4 x /4 x /2 x /2 x x x CTP NATICK HANGER, COPPER TUBE SIZE, COPPER PLATED Material: Copper plated carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: Copper plating as stated in MSS SP58 section 6.3 is for identification purposes only, not corrosion protection. Tubing Price/Each Std. Wgt./ Tubing Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1/2 x /2 x /4 x /4 x x x /4 x /4 x /2 x /2 x x x

37 Version CT COPPER-GARD VAN (BELL) HANGER, COPPER TUBE SIZE SWING GATE DESIGN Material: Epoxy coated over carbon steel Ordering: Specify tube size and figure number FULL CARTON QUANTITIES Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Coated Pkg. Each Size Coated Pkg. Each 1/ / / / CTP VAN (BELL) HANGER, COPPER TUBE SIZE, COPPER PLATED SWING GATE DESIGN Material: Copper plated carbon steel Ordering: Specify tube size and figure number FULL CARTON QUANTITIES Note: Copper plating as stated in MSS SP58 section 6.3 is for identification purposes only, not corrosion protection. Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Plated Pkg. Each Size Plated Pkg. Each 1/ / / / CTSB SOLID BRASS VAN (BELL) HANGER, COPPER TUBE SIZE, SWING GATE DESIGN (set screw NOT included) Material: Solid brass Ordering: Specify tube size and figure number Note: Solid brass offers superior corrosion prtection. Tubing Price Std. Weight Size Each Pkg. Each 1/ /

38 Version CT COPPER-GARD MILFORD HANGER, COPPER TUBE SIZE Material: Epoxy coated over carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: COPPER-GARD products offer far superior corrosion protection Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Coated Pkg. Each Size Coated Pkg. Each 1/2 x /2 x /4 x /4 x x x /4 x /4 x /2 x /2 x x x CTP MILFORD HANGER, COPPER TUBE SIZE COPPER PLATED Material: Copper plated carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: Copper plating as stated in MSS SP58 section 6.3 is for identification purposes only, not corrosion protection. Tubing Price/Each Std. Weight Tubing Price/Each Std. Weight Size Plated Pkg. Each Size Plated Pkg. Each 1/2 x /2 x /4 x /4 x x x /4 x /4 x /2 x /2 x x x RIGHT ANGLE CLAMP Material: Hot-dip galvanized steel Ordering: Specify pipe size and figure number Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/ / / / / /

39 Version STANDARD U-BOLT with 4 HEX NUTS EACH Ordering: Specify pipe size, figure number.and finish Note: Sizes 1/2-1 can be supplied with 3/8 rod size for heavy duty use, specify #137HD U-Bolts with longer tangents or longer threads as well as plastic coated U-Bolts are also available - Priced on application Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price Each Std. Wgt./ Size Size Plain E G Pkg. Each Size Size Plain E G Pkg. Each 1/2 1/ / /4 1/ / / / /4 3/ / /2 3/ / / / Bulk /2 1/ / Bulk / Bulk /2 1/ Bulk / Bulk SS Type SX Type 316 STANDARD U-BOLT, STAINLESS STEEL with 4 HEX NUTS EACH Material: Stainless steel Ordering: Specify pipe size and figure number and stainless steel type Pipe Rod Price Each Wgt./ Pipe Rod Price Each Wgt./ Size Size T-304 T-316 Each Size Size T-304 T-316 Each 1/2 1/ POA / POA /4 1/ POA / POA / POA / POA /4 3/ POA / POA /2 3/ POA / POA / POA / POA /2 1/ POA / POA 6.40

40 STRAIGHT J-HOOK Version Ordering: Specify pipe size, figure number and finish Note: Priced on application Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 3/4 POA /2 POA POA POA /4 POA POA /2 POA POA POA POA OFFSET J-HOOK Ordering: Specify pipe size, figure number and finish Note: Priced on application Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plain Pkg. Each Size Plain Pkg. Each 3/4 POA /2 POA POA POA /4 POA POA /2 POA POA POA POA BEAM CLAMP Ordering: Specify clamp size, beam thickness, flange width, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Clamp Size Price/Each FLANGE WIDTH Wgt./Each Wgt./Each Wgt./Each Wgt./Each Wgt./Each POA

41 Version RETURN LINE ANGLE Ordering: Specify size number and figure number Size Price/Each Wgt./ Plain E G Each SIDE BEAM CONNECTOR Material: Malleable iron Ordering: Specify size number and figure number FULL CARTON QUANTITY ON 3/8 Rod Price/Each Std. Wgt./ Size Plain Galv. Pkg. Each 3/ / STEEL BEAM CLAMP Ordering: Specify clamp size, beam thickness, flange width, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Clamp Size Rod Size Price/Each FLANGE WIDTH Wgt./Each Wgt./Each Wgt./Each Wgt./Each Wgt./Each 1 3/8 POA /2 POA /8 POA /4 POA /8 POA

42 Version SIDE BEAM CLAMP Ordering: Specify clamp size, flange width and thickness, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Size Rod Price/ Size Rod Price/ No. Size Each No. Size Each 1 3/8 Priced 4 3/4 Priced 2 1/2 on 5 7/8 on 3 5/8 Application Application 157 EXTENSION PIECE Material: Malleable iron Ordering: Specify rod size, figure number and finish Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 3/ / / / / TOP BEAM HOOK Ordering: Specify hook size, flange width and thickness, figure number and finish Note: Not recommended for any flange wider than 12 Priced on application Rod Std. Rod Std. Size Size Price/Each Pkg. Size Size Price/Each Pkg. 1 3/8 Priced Bulk 4 3/4 Priced Bulk 2 1/2 on Bulk 5 7/8 on Bulk 3 5/8 Application Bulk Application

43 Version ADJUSTABLE ROD BEAM CLAMP Ordering: Specify rod size, figure number and finish Price / Each Std. Wgt./ Size Plain E G Pkg. Each 3/ Bulk / Bulk / Bulk PIPE COVERING PROTECTION SHIELD Material: Pre-galvanized carbon steel Ordering: Specify shield size and figure number Note: Available in stainless steel - Priced on application Size Shield ID Price/Each Wgt./ Size Shield ID Price/Each Wgt./ E G Each E G Each 0 1 7/ / / / / / / / / / / / /

44 MSS MSS PIPE COVERING PROTECTION SHIELD Version Material: Pre-galvanized carbon steel Ordering: Specify shield size and figure number Note: Available in stainless steel - Priced on application Size Shield ID Price/Each Wgt./ Size Shield ID Price/Each Wgt./ E G Each E G Each X1A 1 7/ C 12 3/ A 2 3/ C A 2 7/ C A 3 1/ C A C A C A C A 5 5/ C A 6 5/ C A 7 5/ C A 8 5/ C B 7 5/ C B 8 5/ C B 9 5/ C B 10 3/ C C 11 3/ SHORT CLIP Ordering: Specify pipe size, figure number and finish Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Pkg. Each Size Pkg. Each 1/ / / / / /

45 Version DOUBLE BOLT PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel, heavy duty and alloy. Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 1/ / / / / / BATH TUB WEDGE Material: Malleable iron Ordering: Specify figure number Price/ Std. Wgt./ Each Pkg. Each 9.50 Bulk SIDE BEAM BRACKET Ordering: Specify pipe size, figure number and finish FULL CARTON QUANTITIES ONLY Rod Price/Each Std. Wgt./ Size Plain Pkg. Each 3/ /

46 Version STANDARD STEEL PIPE CLAMP Ordering: Specify pipe size, figure number and finish Note: Also available in stainless steel - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 1/ / / / / / HEAVY TWO BOLT PIPE CLAMP Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 3 POA POA POA POA POA POA POA POA POA POA POA POA Material: Malleable iron Ordering: Specify figure number MALLEABLE IRON CENTER LOAD BEAM CLAMP Flange Price/Each Std. Wgt./ Size Plain E G Pkg. Each

47 Version Material: Malleable iron Ordering: Specify rod size, figure number and finish MALLEABLE BEAM CLAMP with EXTENSION PIECE Rod Price/ Wgt./ Rod Price/ Wgt./ Size Each Each Size Each Each 3/ / / / / Material: Pre-galvanized carbon steel Ordering: Specify pipe size and figure number FULL CARTON QUANTITIES ONLY TWO HOLE PIPE STRAP Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/ / / / / / / CT COPPER-GARD TWO HOLE COPPER TUBING STRAP, with nails Material: Epoxy over carbon steel Ordering: Specify tube size and figure number FULL CARTON QUANTITIES ONLY Tube Price/Each Std. Wgt./ Tube Price/Each Std. Wgt./ Size Coated Pkg. Each Size Coated Pkg. Each 1/ / / / / /

48 Version SS TWO HOLE PIPE STRAP, STAINLESS STEEL TYPE 304 Material: Stainless steel Ordering: Specify pipe size or O.D. tube size and figure number Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size T-304 Pkg. Each Size T-304 Pkg. Each 1/ / / / / / / POA BULK ONE HOLE PIPE STRAP Material: Electro-galvanized carbon steel Ordering: Specify pipe size and figure number Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size E G Pkg. Each Size E G Pkg. Each 1/ / / / / / SS Type 304 Material: Stainless steel Ordering: Specify pipe size or O.D. tube size and figure number ONE HOLE PIPE STRAP, STAINLESS STEEL TYPE 304 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size T-304 Pkg. Each Size T-304 Pkg. Each 1/ / / / / /

49 Version WIRE PIPE HOOK Ordering: Specify pipe size, length, and figure number FULL CARTON QUANTITIES ONLY Note: For pipe size PC coated hooks, please specify #235PC Size Price/Each Std. Price/Each Std. Wgt./ Size Price/Each Std. Price/Each Std. Wgt./ Plain Pkg. PC Pkg. Each Plain Pkg. PC Pkg. Each 1/2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x x x x x x x x x x CT WIRE TUBING HOOK, COPPER Material: Copper plated carbon steel Ordering: Specify tube size, length, and figure number FULL CARTON QUANTITIES ONLY Note: For tube size PC coated hooks, please specify #235CP Size Price/Each Std. Price/Each Std. Wgt./ Size Price/Each Std. Price/Each Std. Wgt./ Plated Pkg. PC Pkg. Each Plated Pkg. PC Pkg. Each 1/2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x /2 x /4 x x x x x x x x x x

50 Version EXTENSION STRAP for #237 DWV HANGER Material: Pre-galvanized carbon steel Ordering: Specify pipe size, figure number and finish FULL CARTON QUANTITIES ONLY Price/Each Std. Wgt./ Size Pre-Galv Pkg. Each 3/4" (W) X 24" (L) /Tube DWV (DRAIN, WASTE, VENT) HANGER Material: Pre-galvanized carbon steel Ordering: Specify pipe size, figure number and finish - FULL CARTON QUANTITIES ONLY Note: For pipe size PC coated hangers, please specify #237PC PRE-GALV Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Pre-Galv PC Pkg. Each Size Pre-Galv PC Pkg. Each 1 1/ CT COPPER DWV (DRAIN, WASTE, VENT) HANGER Material: Pre-copper plated carbon steel Ordering: Specify tube size and figure number Note: Supports Schedule 40 plastic DWV FULL CARTON QUANTITIES ONLY 239 Pipe Price/Each Std. Wgt./ Pipe Price/Each Std. Wgt./ Size Plated Pkg. Each Size Plated Pkg. Each 1 1/2 x x x x PERFORATED HANGER STRAPPING Material: Black and pre-galvanized carbon steel Ordering: Specify size, gauge, length figure number and finish Size Price/ Wgt./ Size Price/ Wgt./ Each Each Each Each 3/4 x 24ga x 10' Coils Plain /4 x 24ga x 100' Coils Plain /4 x 20ga x 10' Coils Plain /4 x 20ga x 100' Coils Plain /4 x 24ga x 10' Coils E G /4 x 24ga x 100' Coils E G /4 x 20ga x 10' Coils E G /4 x 20ga x 100' Coils E G /4 x 24ga x 50' Coils Plain /4 x 20ga x 50' Coils Plain /4 x 24ga x 50' Coils E G /4 x 20ga x 50' Coils E G

51 Version AH Material: Pre-galvanized carbon steel Ordering: Specify length and figure number PERFORATED HANGER STRAPPING with ALTERNATING HOLE Size Price/Each E G Wgt./ Each 3/4 x 22ga x 10' Coils E G /4 x 22ga x 50' Coils E G /4 x 22ga x 100' Coils E G CT COPPER PERFORATED HANGER STRAPPING Material: Pre-copper plated carbon steel Ordering: Specify size, gauge, length figure number and finish Size Price/Each Copperized Wgt./ Each 239SS 3/4 x 22ga x 10' Coils /4 x 22ga x 50' Coils /4 x 22ga x 100' Coils Material: Stainless steel Ordering: Specify coil length and figure number PERFORATED HANGER STRAPPING, STAINLESS STEEL TYPE 304 Size Price/Each Wgt./ T-304 Each 3/4 x 22ga x 10' Coils /4 x 22ga x 50' Coils STUD GUARD, TRIANGLE POINT Ordering: Specify size and figure number FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Pkg. per ga x 3 x 1 1/ ga x 5 x 1 1/ ga x 6 x 1 1/ ga x 3 x 1 1/ ga x 5 x 1 1/ ga x 6 x 1 1/

52 Material: Ordering: Carbon steel Specify size and figure number FULL CARTON QUANTITIES ONLY Size NAIL PLATE - NON FHA Price/Each Std. Wgt. Pkg. per ga x 3 x 1 1/ ga x 6 x 1 1/ Version G 242GSN BOCA SAFETY PLATE Ordering: Specify figure number, 242G (regular) or 242GSN (self nailing) FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Pkg. per ga x 5 x 8 (242G) ga x 5 x 8 (242GSN) G FHA NAIL PLATE Ordering: Specify size, guage and figure number FULL CARTON QUANTITIES ONLY Size Price/Each Std. Pkg. Wgt. / Each 18 ga X 1 1/2 X ga 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X ga X 3 X ga X 3 X ga X 3 X ga X 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X ga X 1 1/2 X

53 Version G STUD GUARD, TWIST POINT Ordering: Specify size and figure number. FULL CARTON QUANTITIES ONLY Size Price/Each Std. Wgt./ Pkg. per ga x 3 x 1 1/ ga x 6 x 1 1/ PIPE ALIGNMENT GUIDE (SINGLE SPIDER CLAMP) Ordering: Specify pipe or tube size and insulation thickness to determine guide size Size Price/Each Wgt./ Wgt./ Size Price/Each Each Each POA POA POA POA POA PIPE ALIGNMENT GUIDE (DOUBLE SPIDER CLAMP) Ordering: Specify pipe or tube size and insulation thickness to determine guide size Size Price/ Wgt./ Size Price/ Wgt./ Each Each Each Each

54 Version ADJUSTABLE ROLLER HANGER with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each / / POA POA ADJUSTABLE TWO-ROD ROLLER SUPPORT with cast iron roll Ordering: Specify roller size, figure number and finish Note: If pre-drilling holes, contact factory for required dimensions Pipe Price/ Wgt./ Pipe Price/ Wgt./ Size Each Each Size Each Each / / with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel ROLLER CHAIR Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each / / POA POA POA 77.50

55 Version ADJUSTABLE TWO-ROD ROLLER HANGER with cast iron roll and sockets Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel If pre-drilling holes, contact factory for required dimensions Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain E G Each Size Plain E G Each / / S PIPE ROLL STAND, CARBON STEEL CHAIR with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2-3 1/ POA POA S with cast iron roll Ordering: Specify roller size, figure number and finish Note: Also available in stainless steel ADJUSTABLE PIPE ROLL STAND, CARBON STEEL FRAME Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2-3 1/ POA POA

56 Version CT Material: Pre-copper plated carbon steel Ordering: Specify tube size and figure number COPPER TUBING EMLOK ADJUSTABLE SWIVEL RING HANGER Tubing Rod Price/Each Std. Wgt./ Tubing Rod Price/Each Std. Wgt./ Size Size Plated Pkg. Each Size Size Plated Pkg. Each 1/2 3/ /2 1/ /4 3/ / / /2 1/ /4 3/ / /2 3/ / / / CTI 310G COPPER-GARD, COPPER TUBING EMLOK ADJUSTABLE SWIVEL RING HANGER Material: Epoxy coated over carbon steel - Imported Ordering: Specify tube size and figure number Note: COPPER-GARD products offer far superior corrosion protection Tubing Rod Price/Each Std. Wgt./ Tubing Rod Price/Each Std. Wgt./ Size Size Coated Pkg. Each Size Size Coated Pkg. Each 1/2 3/ /2 1/ /4 3/ / / /2 1/ /4 3/ / /2 3/ / / / EMLOK ADJUSTABLE SWIVEL RING HANGER Material: G-90 Pre-galvanized carbon steel Ordering: Specify pipe size and figure number Note: Rod sizes conform to industry standards for rod load ratings UL approved on sizes 3/4-8 FM approved on sizes 3/4-8 APPROVALS: Underwriters Laboratories listed and Factory Mutual approved, complies with Federal Specification A-A- 1192A (Type 10), and Manufacturers Standardization Society SP-69 (Type 10) Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size Pre-Galv. Pkg. Each Size Size Pre-Galv. Pkg. Each 1/2 3/ / /4 3/ /2 1/ / / /4 3/ / /2 3/ / / / /2 1/

57 Version NFPA EMLOK ADJUSTABLE SWIVEL RING HANGER NFPA Material: G-90 Pre-galvanized carbon steel Ordering: Specify pipe size and figure number Note: UL approved on sizes 3/4-8 FM approved on sizes 3/4-8 APPROVALS: Underwriters Laboratories listed and Factory Mutual approved, complies with Federal- Specification A-A-1192A (Type 10), Manufacturers Standardization Society SP-69 (Type 10), and NFPA standards for reduced sizes Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size Pre-Galv. Pkg. Each Size Size Pre-Galv. Pkg. Each 1/2 3/ / /4 3/ /2 3/ / / /4 3/ / /2 3/ / / / /2 3/ / NFPC 310PC EMLOK ADJUSTABLE SWIVEL RING HANGER (NFPA-REDUCED ROD SIZE) PLASTIC COATED Material: Pre-galvanized carbon steel, plastic coated. Ordering: Specify pipe size and figure number Note: Sizes 2-1/2-8 are available in larger rod sizes (see part# 310PC) Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size Coated Pkg. Each Size Size Coated Pkg. Each 1/2 3/ / /4 3/ /2 3/ / / /4 3/ / /2 3/ / / / /2 3/ EMLOK ADJUSTABLE SWIVEL RING HANGER PLASTIC COATED Material: Pre-galvanized carbon steel plastic coated Ordering: Specify pipe size and figure number Note: Sizes 2-1/2-8 also available in NFPA reduced rod sizes at the same list price Pipe Rod Price/Each Std. Wgt./ Pipe Rod Price/Each Std. Wgt./ Size Size P.C. Pkg. Each Size Size P.C. Pkg. Each 1/2 3/ / /4 3/ /2 1/ / / /4 3/ / /2 3/ / / / /2 1/

58 TURNBUCKLE Material: Forged steel Ordering: Specify rod size, figure number and finish Note: Also available in stainless steel - Priced on application Version Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain E G Each Size Plain E G Each 3/8 POA POA POA POA /2 POA POA /8 POA POA /8 POA POA /4 POA POA /4 POA POA /2 POA POA /8 POA POA I TURNBUCKLE Material: Forged steel - Imported Ordering: Specify rod size, figure number and finish Note: Hot dip galvanized turnbuckles are not tapped oversized Rod Price/Each Wgt./ Rod Price/Each Wgt./ Size Plain HDG Each Size Plain HDG Each 3/ / / / / / / / PIPE SADDLE SUPPORT saddle with round bar stock connection Ordering: Specify pipe size, figure number and finish Note: Larger sizes available - Priced on application Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each ADJUSTABLE PIPE SADDLE SUPPORT with COUPLING saddle with threaded coupling connection Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each

59 Version ADJUSTABLE PIPE SUPPORT saddle with threaded rod connection Ordering: Specify pipe size, figure number and finish Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each PIPE SADDLE SUPPORT with U-BOLT saddle with male pipe connection Ordering: Specify pipe size, figure number and finish Note: Extension pipe and baseplate must be ordered separately Center line of pipe to floor dimension needed to quote complete unit Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 1/ / ADJUSTABLE PIPE SADDLE SUPPORT saddle and nipple with cast iron reducer Ordering: Specify pipe size, figure number and finish Note: Extension pipe and baseplate must be ordered separately Center line of pipe to floor dimension needed to quote complete unit Also available in stainless steel Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 1/

60 ADJUSTABLE PIPE SADDLE SUPPORT with U-BOLT Version saddle and nipple with cast iron reducer Ordering: Specify pipe size, figure number and finish Note: Extension pipe and baseplate must be ordered separately Center line of pipe to floor dimension needed to quote complete unit 428KT Material: Pipe Price/Each Wgt./ Pipe Price/Each Wgt./ Size Plain Each Size Plain Each 2 1/ / ADJUSTABLE PIPE SADDLE SUPPORT KIT Ductile iron saddle with carbon steel coupling, carbon nipple and base plate, cast steel reducing coupling, stainless steel screws. (All above are hot-dip galvanized except for stainless steel set screws) Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40 extension pipe to be cut in field. Also available in 316 stainless steel. See part# 428KTSX * Use 3 kit for all smaller diameter pipes. Pipe Price/Each Wgt./ Size HDG Each 3* POA POA POA POA POA POA Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system) 428KTSX 316 STAINLESS ADJUSTABLE PIPE SADDLE SUPPORT, KIT Material: 316 stainless steel: saddle with welded coupling, nipple, reducing coupling, set screws and base plate. Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40 extension pipe to be cut in field. * Use 3 kit for all smaller diameter pipes. Pipe Price/Each Wgt./ Size HDG Each 3* POA POA POA POA POA POA Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system)

61 Version KTU ADJUSTABLE PIPE SADDLE SUPPORT, with U-BOLT KIT Material: Ductile iron saddle with carbon steel coupling, carbon nipple and base plate, carbon steel U-bolt and nuts, cast steel reducing coupling, stainless steel screws. (All above are hot-dip galvanized except for stainless steel set screws) Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40 extension pipe to be cut in field. Also available in 316 stainless steel. See part# 429KTUSX Pipe Size Price/Each HDG Wgt./ Each 3 POA POA POA POA POA POA Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system) 429KTUSX Material: 316 STAINLESS ADJUSTABLE PIPE SADDLE SUPPORT, with U-BOLT, KIT 316 stainless steel: saddle with welded coupling, U-bolt and nuts, nipple, reducing coupling, set screws and base plate. Ordering: Specify pipe size and figure number. Note: Saddles accomodate ductile iron pipe and IPS. Support requires 2 schedule 40, stainless steel extension pipe to be cut in field. Pipe Price/Each Wgt./ Size 316 Stainless Each 3 POA POA POA POA POA POA Set screws eliminate the need to weld or thread in the field. FACTORY SYSTEM TESTED TO 11,000 LBS. (Support must be properly aligned to piping system) 450 HEAVY BEAM CLAMP ASSEMBLY Material: Clamps are carbon steel, eyenut is forged steel Ordering: Specify clamp size, rod size, figure number and finish Also specify with or without eyenut Size Price/Each Wgt./ Price/Each Wgt./ Size Less Eyenut With Eyenut Each Less Eyenut With Eyenut Each

62 Ordering: Specify figure number CORPORATION EYE BOLT Version Bolt Price/ Wgt./ Size Each Each 3/ FOUR BOLT SOCKET CLAMP Ordering: Specify pipe size, figure number and finish Pipe Rod Price/ Wgt./ Pipe Rod Price/ Wgt./ Size Size Each Each Size Size Each Each 4 3/4 POA POA /4 POA /8 POA /4 POA /4 POA /4 POA /8 POA /4 POA /2 POA SOCKET CLAMP WASHER Material: 3/4 size is malleable iron, 1-1 1/2 sizes are carbon steel Ordering: Specify rod size and figure number 600 Pipe Rod Price/ Wgt./ Pipe Rod Price/ Wgt./ Size Size Each Each Size Size Each Each / /4 POA POA /8 POA /8 POA /2 POA 3.02 Ordering: Specify pipe size, figure number and finish Note: Washers must be ordered separately SOCKET CLAMP Cast Iron Rod Price/Each Wgt./ Cast Iron Rod Price/Each Wgt./ Pipe Size Size Plain Each Pipe Size Size Plain Each 3 3/ / / / / / / / / /

63 Version MEDIUM WELDED BRACKET Ordering: Specify size, figure number and finish Size Price/Each Plain Wgt./ Each HEAVY WELDED BRACKET Ordering: Specify size figure number and finish Size Price/Each Wgt./ Price/Each Wgt./ Size Plain Each Plain Each LIGHT WELDED STEEL BRACKET Ordering: Specify size figure number and finish Size Price/Each Plain Wgt./ Each C CLIP FOR 820 BRACKET Ordering: Specify size figure number and finish Size Price/ Wgt./ Each Each

64 NAILING SLEEVE Version Material: Pre-galvanized carbon steel Ordering: Specify diameter, height, with or without covers and tabs, and figure number Priced on application 909 FORGED STEEL CLEVIS Material: Forged steel Ordering: Specify size, rod size, figure number and finish Note: Also available in larger sizes and stainless steel - Priced on application 909 I Body Maximum Tap Price/Each Wgt./ Size Size Plain E G Each 2 3/8, 1/2, 5/8 POA POA /2 3/4, 7/8 POA POA , 1 1/8, 1 1/4 POA POA /2 1 1/2 POA POA 8.10 FORGED STEEL CLEVIS Material: Forged steel - Imported Ordering: Specify size, rod size, figure number and finish Note: Hot dip galvanized forged clevis are not tapped oversized 910 Body Maximum Tap Price/Each Wgt./ Size Size Plain HDG Each 2 3/8, 1/2, 5/ /2 3/4, 7/ , 1 1/8, 1 1/ /2 1 1/ PIPE SLEEVE with WELDED LUGS Material: Steel pipe Ordering: Specify pipe size, length, figure number and finish - Priced on application 915 WATERPROOF SLEEVE Material: Steel pipe Ordering: Specify pipe size, length, figure number and finish Specify if waterstop is needed - Priced on application

65 Version PIPE COVERING PROTECTION SADDLE Ordering: Specify pipe size, figure number and finish Note: Alloy and stainless steel also available - Priced on application 1 Thick Covering #1900 Pipe Price/Ea. Wgt./ Size Plain Each 1/ / / / / / /2 Thick Covering #1903 Pipe Price/Ea. Wgt./ Size Plain Each 1 1/ / / / /2 Thick Covering #1901 Pipe Price/Ea. Wgt./ Size Plain Each 3/ / / / / Thick Covering #1904 Pipe Price/Ea. Wgt./ Size Plain Each / / Thick Covering #1902 Pipe Price/Ea. Wgt./ Size Plain Each 3/ / / / / Thick Covering #1905 Pipe Price/Ea. Wgt./ Size Plain Each

66 Version PIPE SLIDE ASSEMBLY tee with teflon slide plate Ordering: Specify type number, pipe size, travel, figure number and finish Type No. Price/Each (Up to 8 Pipe Size) Travel (in.) Type Price/Each (10 to 24 Pipe Size) Travel (in.) No Price on Application Price on Application

67 Version STRUT AND STRUT ACCESSORIES

68 Version STRUT, 1 5/8 X 1 5/8 X 12 GAUGE Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE Fig. Type List Price Per Ft. Wt. Per Ft. (lbs) No. Pre-Galv Green Pre-Galv Green 7000 Solid Slotted A 7001A STRUT, 1 5/8 X 1 5/8 X 12 GAUGE BACK-TO-BACK Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes are available 10 LENGTHS - 30 PCS. PER BUNDLE 20 LENGTHS - 30 PCS. PER BUNDLE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Green Pre-Galv Green 7000A Solid A Slotted SS SX 7001SS SX STAINLESS STEEL STRUT, 1 5/8 X 1 5/8 X 12 GAUGE Ordering: Specify figure number and stainless steel type Note: Standard lengths:10 and 20 Other lengths available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. 304 (SS) 316 (SX) 304 (SS) 316 (SX) 7000 (304,316) Solid POA POA (304, 316) Slotted POA

69 Version Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STRUT, 1 5/8 X 1 5/8 X 14 GAUGE Fig. Type List Price Per Ft. Wt. Per Ft. (lbs) No. Pre-Galv Green Pre-Galv Green 7100 Solid Slotted SS SX 7101SS SX Ordering: Specify figure number and stainless steel type Note: Standard lengths:10 and 20 Other lengths available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STAINLESS STEEL STRUT, 1 5/8 X 1 5/8 X 14 GAUGE Fig. Type List Price Per Ft. Wt. Per Ft. (lbs) No. 304 (SS) 316 (SX) 304 (SS) 316 (SX) 7100 (304, 316) Solid POA POA (304, 316) Slotted POA Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STRUT, 1 5/8 X 13/16 X 14 GAUGE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Green Pre-Galv Green 7200 Solid Slotted

70 Version SS SX 7201SS SX Ordering: Specify figure number Note: Standard lengths:10 and 20 Other lengths available 10 LENGTHS - 50 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STAINLESS STEEL STRUT, 1 5/8 X 13/16 X 14 GAUGE Fig. Type List Price Per Ft. List Price Per Ft. No. 304 (SS) 316 (SX) Wt. Per Ft. (lbs) 7200 Solid POA Slotted POA Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes are available 10 LENGTHS - 25 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE CONTINUOUS CONCRETE INSERT, 1 3/8 X 1 5/8 X 12 GAUGE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Plain Pre-Galv Plain 7225 Standard POA Ordering: Specify figure number and finish Note: Standard lengths:10 and 20 Other lengths and finishes are available 10 LENGTHS - 25 PCS. PER BUNDLE 20 LENGTHS - 25 PCS. PER BUNDLE STRUT, 2 7/16 X 1 5/8 X 12 GAUGE Fig. List Price Per Ft. Wt. Per Ft. (lbs) Type No. Pre-Galv Green Pre-Galv Green 7230 Solid Slotted