ISO 6431/6432 Cylinders
|
|
|
- Matthew Carson
- 5 years ago
- Views:
Transcription
1 ISO 6431/6432 ylinders ISO 6431, VDM ir ylinders ISO ISO 6432/TOP ylinders ISO P ir ylinders P ISO 6431/6432
2 imba ISO 6431, VDM ir ylinders ISO 6431/6432 Item omponent Material Rod earing Sintered ronze Rod uide luminum lloy ody nodized luminum lloy D Piston Seal (2) Polyurethane Magnet Plastoferrite Piston luminum lloy Rear ead luminum lloy Piston Rod Stainless Steel I Rod Seal/Wiper Polyurethane J ushion Seal (2) una-n ushion Seal Retainer (2) Nylon 66 ushion Sleeve luminum lloy M Piston O-Ring (2) una-n N Piston earing Ring Nylon 66 O ody Seal (2) una-n P Piston Nut/ushion luminum lloy Q Tie Rod Nut (8) Zinc Plated Steel R Tie Rod (4) Stainless Steel Not Shown ushion djustable Screw (2) ushion djustable Seal (2) Plated rass una-n 11.2
3 imba ISO 6431, VDM ir ylinders ow to Order The Model Number for all imba ISO 6431 cylinders consists of four alphanumeric clusters. These designate type, bore size and stroke length, and options. variety of Mounting its are available for use with each basic cylinder. Please select the required mounting type from the specifications shown in the appropriate ore Size Section. Please refer to the charts below for an example of Model Number This is an ISO 6431 Type ylinder, with 32mm ore Size, 100mm Stroke Size. ushions and Magnetic Piston are standard ISO 6431, VDM ir ylinders ISO 6431 TYP (cast end cap design) ore Size 32mm 40mm 50mm 63mm 80mm 100mm Stroke nter stroke in mm Options - ushions oth eads - ushion ront ead Only R - ushion Rear ead Only D - Double nded - xtra Rod xtension R - igh Temperature Seals (-20 to+200 ) ISO 6432/TOP ylinders eneral Specifications Specifications ylinder ore Operating Pressure Range 0.5 bar to 10 bar Operating Temperature Range 0 to +80 Stroke engths 1mm to 2800mm Note: Position eedback available as aspecial option. ISO 6431 VDM Price ist asic Model 32mm 40mm 50mm 63mm 80mm 100mm $ $ $ $ $ $ add per mm stroke ISO 6432 P ir ylinders P Options D-Double Rod Option $25.70 $34.10 $44.40 $48.30 $58.00 $90.60 add per mm stroke R -igh Temperature per mm ll product is sold.o.. shipping point. Prices are subject to change without notice or Technical ssistance:
4 imba ISO 6431, VDM ir ylinders asic ylinder (mm) ore d11 D M I W 1 2 M N Q P T R 1 2 ushion Weight Weight Stroke (g) per mm M10x / M6 5 32, M12x / M , M16x / ,5 16 M8 8 46, , M16x / ,5 16 M8 8 56, M20x / M M20x / ,5 19,5 M Double Rod nd (mm) ore d11 D M I W 1 M N P Q T R 1 2 ushion Weight Weight Stroke (g) per mm M10x / M , M12x / M , M16x / ,5 M , , M16x / ,5 M , M20x / M M20x / ,5 M10 19,
5 imba ISO 6431, VDM ir ylinders MS1 - oot racket (mm) ISO 6431, VDM ir ylinders ISO 6431 M - Model M N O P Q Weight (g) MS MS MS MS MS MS ront and Rear lange (mm) ISO 6432/TOP ylinders ISO 6432 P ir ylinders P Model D I J Weight (g) M Ø30 Ø M Ø35 Ø M Ø40 Ø M Ø45 Ø M Ø45 Ø M Ø55 Ø or Technical ssistance:
6 imba ISO 6431, VDM ir ylinders MP2 - levis Mount (mm) Model R S T U V W X Y Z Weight (g) MP R10 53 Ø MP R12 60 Ø MP R12 68 Ø MP R16 79 Ø MP R16 99 Ø MP R Ø MP4 - Pivot Mount (mm) Model R S T U W X Z Weight (g) MP R10 Ø MP R12 Ø MP R12 Ø MP R16 Ø MP R16 Ø MP R20 Ø
7 imba ISO 6431, VDM ir ylinders (mm) Pivot racket - Type 2 ISO 6431, VDM ir ylinders ISO 6431 Pivot racket - Type 1 Model I M N O Q R Weight (g) P2-32 Ø10 Ø R P2-40 Ø12 Ø R P2-50 Ø12 Ø R P2-63 Ø16 Ø R P2-80 Ø16 Ø R P2-100 Ø20 Ø R ISO 6432/TOP ylinders ISO 6432 P ir ylinders P Model D I J Weight (g) P1-32 Ø10 R Ø P1-40 Ø12 R Ø P1-50 Ø12 R Ø P1-63 Ø16 R Ø P1-80 Ø16 R Ø P1-100 Ø20 R Ø or Technical ssistance:
8 imba ISO 6431, VDM ir ylinders levis racket Model M N O P R D Weight (g) -32 Ø10 Ø R Ø12 Ø R Ø12 Ø R Ø16 Ø R Ø16 Ø R Ø20 Ø R Pivot levis Pin racket Model O P Q R Weight (g) PP-32 Ø PP-40 Ø PP-50 Ø PP-63 Ø PP-80 Ø PP-100 Ø Rod levis ore Model I J M N Weight (g) 32 R-M10x1.25 M10x R-M12x1.25 M12x , 63 R-M16x1.5 M16x , 100 R-M20x1.5 M20x Spherical Rod ye ore Model S T U V W X Y Z Weight (g) 32 SR-M10x Ø28 17 Ø Ø10 M10x SR-M12x Ø32 19 Ø Ø12 M12x , 63 SR-M16x Ø42 23 Ø Ø16 M16x , 100 SR-M20x Ø50 30 Ø Ø20 M20x Rod Nut ore Model T U Weight (g) 32 RN-4 M10x MN-1 M12x , 63 MN-2 M16x , 100 MN-5 M20x Rod oupler ore Model D 1 N X 25, 32 -M10x1.25 M10x M12x1.25 M12x , 63 -M16x1.5 M16x , 100 -M20x1.5 M20x
9 imba ISO 6431, VDM ir ylinders Prices ISO 6431, VDM ir ylinders Mounting its and 32mm 40mm 50mm 63mm 80mm 100mm MS1 ore (oot racket it) $19.95 $21.80 $25.70 $28.55 $33.45 $46.55 M ore (lange it) MP2 ore (Pivot emale it) MP4 ore (Pivot Male it) P1 ore (Pivot racket) P2 ore (Pivot racket) ore (levis racket) ISO 6431 Rod ISO 6432/TOP ylinders Rod levis ist Spherical Rod yes ist Rod Nuts ist R-M10x1.25 $7.95 SR-M10x1.25 $28.70 RN-4 $1.00 R-M12x SR-M12x MN R-M16x R-M20x Rod lignment ouplers ist -M10x1.25 $ M12x M16x M20x SR-M16x SR-M20x Pivot Pins ist PP-32 $7.95 PP PP PP PP PP MN MN Switches ist MRS- $23.15 MRS-Q S S-Q S S-Q ISO 6432 P ir ylinders P ll product is sold.o.. shipping point. Prices are subject to change without notice or Technical ssistance:
10 meets YOUR NDS... Reliable Service, World-Wide -rom a world-wide leader producing millions of actuators each year nvironmental - Pre-lubricated for longer, maintenance free operation Noise Reduction -Shock absorbing bumpers Performance nd Quality Processes Throughout -Roll formed threads -igh strength pistons permanently riveted and sealed -Roller burnished stainless steel rods Productivity -dvanced bearing and seal materials for higher speed applications Safety -Double rolled construction - Permanent mechanical retention; needles cannot blow out under pressure Reduced nvelope -Space savings available resulting from smaller external dimensions Material or ny pplication -eads available in luminum, Stainless Steel and Delrin Unique ustomer Solutions -Rapid design and delivery time for custom modifications 11.10
11 ow to Order The Model Number for all imba ISO 6432 ylinders consists of five lphanumeric clusters. The first designates the Type, the second the ore Size, the third the Stroke ength, the fourth the Mounting style, and the fifth the Options. ISO 6431, VDM ir ylinders Please refer to the chart below for an explanation of the following model number: M N-NT: This is an ISO 6432 Type ylinder with a magnet, with 25mm ore Size, 100mm Stroke Size, Nose Mounted, and with ushions in oth eads and No Thread Rod. TYP MOUNTINS ISO 6431 (M) = (MRS) Double cting D(M) = (MRS) Double cting Double nd Rod S(M) = (MRS) Single cting -0-50mm Stroke SZ(M) = (MRS) Single cting -DSpring* R(M) = (MRS) Reverse Single cting -DSpring* NR(M) = (MRS) Non-Rotating Rod N = Nose Mount xial Port Q = Nose Mount Radial Port U = Universal Mount ISO 6432/TOP ylinders OR SIZ 8mm 10mm 12mm 16mm 20mm 25mm M N-NT *- D(eavy Duty) springs available in stroke lengths over 50mm ** -when viewed from the rear STRO nter stroke in mm Standard stroke lengths in 1mm increments = 1-300mm S = 1-50mm SZ = 1-300mm D = 1-300mm R = 1-100mm NR = 1-300mm OPTIONS = ushions oth eads = ushion ront Only R = ushion Rear Only Y = Stainless Steel nd aps (16, 20 &25mm bore) R = igh Temperature Seals (-20 to+200 ) NT = No Thread Rods S = Piston Wearstrip (16, 20 &25mm bore) T2 = ow Profile (ll MRS) 90 W from ports** T4 = ow Profile (ll MRS) 90 W from ports** = xtra Rod xtension (oth ends on D) ISO 6432 P ir ylinders P Y option available with radial ports only or Technical ssistance:
12 -ore -Stroke -Mount -Options ist Prices 8mm 10mm 12mm 16mm 20mm 25mm Nose Mount ase (-N) $22.35 $24.50 $26.95 $28.70 $30.60 $32.15 Universal ase (-U) Stroke X.XX (per mm) R (igh Temperature Seals) ushions Per nd n/a n/a n/a S(Wear Strip) n/a n/a n/a Y(SS nd aps) n/a n/a n/a M(Magnet Prefix) n/a NR (Non-rotating) n/a n/a n/a Stroke dder for NR n/a n/a n/a X.XX (per mm) for NR n/a n/a n/a T(Switch Track) n/a Standard strokes are 1mm increments to 300mm. Non-standard and longer strokes, add Schedule 27. No charge options: Q, Side Ported Rear ead (use Nose Mount base price); NT, Nontreaded Rod. S -ore -Stroke -Mount -Options 8mm 10mm 12mm 16mm 20mm 25mm Nose Mount ase (-N) $18.40 $20.05 $21.70 $23.85 $25.75 $28.70 Universal Mount ase (-U) Stroke R (igh Temperature Seals) X.XX (per mm) M(Magnet Prefix) n/a Z(eavy Spring and long Strokes; Prefix) n/c n/c n/c n/c n/c n/c T(Switch Track) n/a Standard strokes are 1mm increments to 50mm. or longer strokes, order as SZ model. No charge options: Q(use Nose Mount base price); NT *Z option required for strokes longer than 50mm. SZ strokes are standard in 1mm increments from 1 to 150mm. Non-standard strokes, add Schedule 27. D -ore -Stroke -Options 8mm 10mm 12mm 16mm 20mm 25mm ase $31.75 $35.05 $35.25 $39.15 $40.90 $42.20 Stroke R (igh Temperature Seals) ushions per end n/a n/a n/a S(Wear Strip) n/a n/a n/a Y(SS nd aps) n/a n/a n/a X.XX (per mm) M(Magnet Prefix) n/a T(Switch Track) n/a Standard strokes are 1mm increments to 300mm. Non-standard and longer strokes, add Schedule 27. No charge options: NT ll product is sold.o.. shipping point. Prices are subject to change without notice
13 R -ore -Stroke -Mount -Options ist Prices 8mm 10mm 12mm 16mm 20mm 25mm Nose Mount ase (-N) $21.55 $26.50 $27.90 $29.80 $31.40 $33.05 Universal Mount ase (-U) Stroke R (igh Temperature Seals) X.XX (per mm) M(Magnet Prefix) n/a T(Switch Track) n/a Standard strokes are 1mm increments to 100mm. Non-standard and longer strokes, add Schedule 27. No charge options: NT Type P -ore -Stroke -Mount -Options 16mm 20mm 25mm Nose Mount ase (-N) $45.70 $47.15 $48.70 Universal Mount ase (-U) Stroke ushions per end S(Wear Strip) X.XX (per mm) M(Magnet Prefix) T(Switch Track) Standard strokes are 1mm increments to 500mm. Non-standard and longer strokes, add Schedule 27. No charge options: NT PD -ore -Stroke -Mount -Options 16mm 20mm 25mm Nose Mount ase (-N) $56.30 $57.75 $59.25 Stroke ushions per end S(Wear Strip) X.XX (per mm) M(Magnet Prefix) T(Switch Track) Standard strokes are 1mm increments to 300mm. Non-standard and longer strokes, add Schedule 27. No charge options: NT ISO 6431, VDM ir ylinders ISO 6431 ISO 6432/TOP ylinders ISO 6432 P ir ylinders P ISO 6432 Position Sensing Switches Model Number Price 1 Model Number Price 1 MRS o $22.90 MRS o $27.55 MRS-.027-X-o MRS-.027-X-o MRS-.027-Q-o MRS-.027-Q-o MRS-.027-Q-o MRS-.027-Q-o MRS-.027-QX-o MRS-.027-QX-o Price includes band ll product is sold.o.. shipping point. Prices are subject to change without notice or Technical ssistance:
14 ore oot racket Model Number Price 8, 10-1 $ , , ore lange Mount Model Number Price 8, 10 M-1 $ , 16 M , 25 M ore levis oot Model Number Price 8, 10-1 $ , , ore Rod levis Model Number Price 8, 10 R-M4X0.7 $ , 16 R-M6X R-M8X R-M10X ore Mounting Nut Model Number Price 8, 10 MN-1 $ , 16 MN , 25 MN ore Rod Nut Model Number Price 8, 10 RN-1 $ , 16 RN RN RN Metric Quik-lo low ontrols Spherical Rod yes ore Model Number Price 8, 10 SR-M4X0.7 $ , 16 SR-M6X SR-M8X SR-M10X nurled nob Model Number Price PM-1-Q4- $21.90 PM-1-Q PM-2-Q PM-2-Q PM-2-Q PM-4-Q PM-4-Q Recessed Needle Model Number Price PM-1-Q4-R $18.70 PM-1-Q6-R PM-2-Q4-R PM-2-Q6-R PM-2-Q8-R PM-4-Q6-R PM-4-Q8-R P (ll Stainless onstruction) ore oot racket Model Number Price 16-2-SS $ , 25-3-SS levis oot (Pivot racket) ore Model Number Price 16-2-SS $ , 25-3-SS ore Rod levis Model Number Price 16 R-2-SS $ R-3-SS R-4-SS ore Mounting Nut Model Number Price 16 MN-2-SS $ , 25 MN-3-SS 3.20 ore Rod Nut Model Number Price 16 RN-2-SS $ RN-3-SS RN-4-SS 2.10 ll product is sold.o.. shipping point. Prices are subject to change without notice
15 ompatibility hart Due to design or incompatibility restrictions, the following options may NOT be ordered in combination. or example stainless steel end cap may not be ordered with cushions. Options NT and are available independently, with each other or with all viable option combinations. OR OPTION NR Y M S 8 N/ N/ N/ N/ N/ 10 N/ N/ N/ N/ N/ 12 N/ N/ N/ N/ N/ 16, Y NR, Y NR, S M 20, Y NR, Y NR, S M 25, Y NR, Y NR, S M ISO 6431, VDM ir ylinders ISO 6431 Metric Unit Of Measure onversion Tables Metric To Imperial onversion Imperial Unit Of Measure eneral Specifications Imperial To Metric onversion orce Newtons (N) x Pounds (lbs) x Pressure ar (b) x 14.5 Pounds Per Square Inch (PSI) x0.069 Measurement Millimetres x Inches x25.4 Temperature entigrade 9x ahrenheit OR 5x( 32) ushion ength (mm) ach nd N/ Operating Pressure Range Maximum Minimum -Double cting Operating Temperature Range Standard Seals igh Temperature Seals Operating Media 10 bar 0.5 bar -10 to to +200 iltered ompressed ir/ubricated or Non-ubricated Standard Stroke engths See Table on page Maximum Stroke ength* Stroke Tolerance Piston Speed ife xpectancy * Varies according to bore size, please consult your local IM distributor. 1000mm +1.0mm/-0mm 5mm/s to 1000mm/s (igher speed available on request) 3000km ISO 6432/TOP ylinders ISO 6432 P ir ylinders P or Technical ssistance:
16 Weights OR Option N Option U Type D adder per 10mm stroke Weights (approximate) are for zero stroke, in grams. Rod uckling ormula The maximum recommended cylinder stroke is dependent upon: 1. Mounting type 2. Rod diameter 3. Rod end connection Using the following formula it is possible to determine the buckling load for a given stroke length of cylinder = π 2 J (I xm) 2 S = Permissible uckling oad (N) =Young's Modulus of lasticity (N/mm 2 ) J=Moment of Inertia (mm 4 ) I=uckling ength = Stroke (mm) M=Stroke Multiplier (see table below) S=Safety actor (recommended minimum 5) OW TO UT ROD UIN ORS XMP: Q. What is the buckling load for a 25mm bore cylinder with a pivoted and guided load attached, stroke 200mm?. Using the formula: = π2 J (I xm) 2 S = x10 3 N/mm 2 I=200mm (stroke) M=2(for pivoted and guided load) S=5(safety factor) D=10mm (piston rod diameter for cylinder) J= πd4 = π10 4 =490.87mm = π2 x x10 3 x490.9 =1150.9N -1.15kN (2 x200) 2 x5 ROD ND ONNTION YINDR MOUNTIN TYP STRO MUTIPIR IXD & UIDD PIVOTD & UIDD IXD & SUPPORTD PIVOTD & UIDD
17 Output orce (N) Output orce (N) Output orces ylinder output forces can be determined in one of two ways: 1. alculation 2. raph ISO 6431, VDM ir ylinders ylinder Power Pressure Output orce = x actor (bar) (N) OR POWR TOR XTNSION RTRTION xtend Retract Pressure (ar) 25mm 20mm 16mm 12mm 10mm 8mm ISO 6431 ISO 6432/TOP ylinders mm The ir onsumption hart is based on the following formula for a complete cylinder cycle (cylinder extends and retracts): PRSSUR (R) ir onsumption hart Pressure (ar) Q = πd2 + π(d 2 d 2 ) hp mm 10mm 12mm 16mm 20mm 25mm 20mm 16mm 12mm 10mm 8mm Draw a line across for the pressure used. Where this intersects the required bore size, draw a vertical line down. This will give you the air consumption. Multiply this by the stroke in cm, and this will give the air consumption per cycle. ISO 6432 P ir ylinders P IR ONSUMPTION (litres/cm) Q =ir volume per cm of stroke () D =Piston or piston rod diameter (mm) h =Stroke (mm) p = Operating pressure (bar) d = Piston rod diameter (mm) XMP: ylinder Stroke ylinder ore Operating Pressure ir onsumption = 2.5cm = Ø25mm = 7ar = itres or Technical ssistance:
18 Materials N D J M P Q R ITM OMPONNT MTRI Piston Rod Stainless Steel (type 303 s31) D Rod uide Rear ead Piston luminium lloy (anodized) Delrin Plastic -(type P) Stainless Steel -(option Y) luminium lloy (anodized) Delrin Plastic -(type P) Stainless Steel -(option Y) luminium lloy rass -(type D) ody Stainless Steel (type 304) Rod Seal/Rod Wiper Nitrile (NR) or luoro-rubber (PM) -(option R) Rod earing Self ubricating Thermoplastic lloy Piston Seal Nitrile (NR) or luoro-rubber (PM) -(option R) J Magnet Neodymium Iron oron Nitrile Piston earing Ring arbon illed PT umper luoro-rubber (PM) M ushion Seal N ushion Sleeve luminium lloy P ushion Screw Retainer Nitrile (NR) - Standard or luoro-rubber (PM) -(option R) luminium lloy (anodized) Stainless Steel -(type P) Q ushion o-ring luoro-rubber (PM) R ushion Screw Stainless Steel (type 303 s31) 11.18
19 NOS MOUNT -N option Double cting M 1* *-Plus stroke **-Plus 2x stroke ISO 6431, VDM ir ylinders R Q P 3 ISO R 2 UNIVRS MOUNT -U option M 2* S N ISO 6432/TOP ylinders R W øt 1 J 2 DOU NDD MN** * R 1 2 ore 6g 6g h8 D D 1 D 2 D 3 J P Q N R S T 9 W d13 M 1 M 2 MN ISO 6432 P ir ylinders P 8 M4x0.7 - M12x M5x M4x0.7 - M12x M5x M6x1.0 4 M16x M5x M6x1.0 4 M16x M5x M8x M22x / M10x M22x / or Technical ssistance:
20 Qoption Radially ported rear head available on non-cushioned cylinders. The M 1 dimension increases by the amount shown alongside ore dder ore dder Double cting -With djustable ushioning NOS MOUNT -N option M 3* * - Plus stroke ** -Plus 2x stroke R 1 2 UNIVRS MOUNT -U option M 2* N S R W øt 1 J 2 DOU NDD MN** * R 1 2 ore 6g 6g D D 1 h8 D 2 J N R S T 9 W d13 M 2 M 3 MN 16 M6x1.0 4 M16x M5x M8x M22x / M10x M22x /
21 Single cting -Spring To Retract (SZ) The SZ & Rseries offer aheavier spring force than the S, and the flexibility of strokes exceeding 50mm. NOS MOUNT -Noption ISO 6431, VDM ir ylinders M 4 Q P ISO R 2 UNIVRS MOUNT -U option M 5 S N ISO 6432/TOP ylinders R W 2 NOS MOUNT -N option Single cting -Spring To xtend (R) UNIVRS MOUNT -U option 1* M 6 2 R J Q øt * - Plus stroke P ISO 6432 P ir ylinders P 1* M 7 N S R W øt 1 J 2 See following page for dimensional tables or Technical ssistance:
22 ore 6g 6g D D 1 D 2 h8 D 3 1 J N P Q R S T 9 W d13 8 M4x0.7 - M12x M5x M4x0.7 - M12x M5x M6x1.0 4 M16x M5x M6x1.0 4 M16x M5x M8x M22x / M10x M22x / alculating ylinder engths In order to provide greater customer flexibility, imba SZ and R cylinders can be fitted with multiple springs. To calculate the length ( M dimension), use the following formula based on the table below: xample 1: SZ U SZ-25-_-U ase length (M 5 )=103mm Multiplier = Stroke Increment = = 3.12 Multiplier = 3(always round down) Multiplier x dder = 3 x 47 = 141mm dd ase ength = =244 dd whole stroke increment: Stroke (Multiplier x25) =78-75=3 SZ U = = 247 xample 2: R N R N ase length (M 6 )=60.2mm Multiplier = Stroke Increment = = 6.88 Multiplier = 6(always round up) Multiplier x dder = 6 x 29 = 174mm dd ase ength = =234.2 dd whole stroke increment: Stroke (Multiplier x 12.5) = = 11 R N = = SZ - Single cting, Rod To Retract Spring orces R - Single cting, Rod To xtend M 4 (N) M 5 (U) dder Increment M 6 (N) M 7 (U) dder Increment ore S (available up to 50mm stroke) Preload t Strokes (N) 10mm 25mm 50mm inal oad (N) Preload t 10mm Stroke (N) SZ &R inal oad (N)
23 VIS OOT -arbon Steel ore Type D J 8, , , ISO 6431, VDM ir ylinders OOT MOUNTIN ore Type D J 8, , , ISO 6431 ROD VIS ore Type 1 2 J 8, 10 R-M4x0.7 M4x , 16 R-M6x1.0 M6x R-M8x1.25 M8x R-M10x1.25 M10x ISO 6432/TOP ylinders N MOUNTIN ore Type D 1 2 M 1 M 2 8, 10 M SPRI ROD Y ROD/MOUNTIN NUT 12, 16 M , 25 M ore Type D J X 8, 10 SR-M4x0.7 M4x , 16 SR-M6x1.0 M6x SR-M8x1.25 M8x SR-M10x1.25 M10x ore Type Type 8, 10 RN-1 M4x MN-1 M12x , 16 RN-2 M6x MN-2 M16x RN-3 M8x RN-4 M10x MN-3 M22x ISO 6432 P ir ylinders P ROD OUPR ore Type D 1 N X 8, 10 -M4x0.7 M4x , 16 -M6x1.0 M6x M8x1.25 M8x , 32 -M10x1.25 M10x M12x1.25 M12x , 63 -M16x1.5 M16x , 100 -M20x1.5 M20x or Technical ssistance:
24 imba P ir ylinders ow to Order The Model Number for all imba P ylinders consists of five lphanumeric clusters. The first designates the Type, the second the ore Size, the third the Stroke ength, the fourth the Mounting style, and the fifth the Options. Please refer to the chart below for an explanation of the following model number: PM N-NT: This is a P Type ylinder with a magnet, with 25mm ore Size, 100mm Stroke Size, Nose Mounted, and with ushions in oth eads and no Rod Threads. TYP P = Double cting PM = MRS Double cting PD = Double cting Double nd Rod PDM = MRS Double cting Double nd Rod MOUNTINS N = Nose Mount Radial Port U = Universal Mount PM N-NT OR SIZ STRO OPTIONS NOT: 16mm 20mm 25mm lastomer bumpers are not standard for the P nter Stroke In mm = ushions oth eads = ushion ront Only R = ushion Rear Only NT = NoThread Rods S = Piston Wearstrip T2 = ow Profile (ll MRS) 90 W from ports* T4 = ow Profile (ll MRS) 90 W from ports* = xtra Rod xtension (oth ends on D) *-when viewed from the rear 11.24
25 imba P ir ylinders eneral Specifications The imba P cylinder has stainless steel body, stainless steel rod and Delrin end caps. It is ideal for applications or operating environments that require exposure to moisture, lubricants and specific solvents. ISO 6431, VDM ir ylinders ISO 6431 OR ushion ength (mm) ach nd ISO 6432/TOP ylinders ead Material Delrin Plastic type 150S Operating Pressure Max. Min. Operating Temperature Range Operating Media Standard Stroke engths Maximum Stroke ength* Stroke Tolerance Piston Speed ife xpectancy Weights 7bar 0.5 bar -10 to+80 iltered ompressed ir/ubricated or Non-ubricated 1mm to 300mm 1000mm +1.0mm/-0mm 5mm/s to 1000mm/s 3000km * Varies according to bore size, please consult your local IM distributor. ore ISO 6432 P ir ylinders P Option N Option U Type D adder per 10mm stroke Weights (approximate) are for zero stroke, in grams or Technical ssistance:
26 imba P ir ylinders Double cting -With djustable ushioning NOS MOUNT -N option M 3* * - Plus stroke ** -Plus 2x stroke R 1 2 UNIVRS MOUNT -U option M 2* N S R W øt 1 J 2 DOU NDD MN** * R 1 2 ore 6g 6g D D 1 D 2 h8 J N R S T 9 W d13 M 2 M 3 MN 16 M6x1.0 4 M16x M5x M8x M22x / M10x M22x /
27 imba P ir ylinders PIVOT RT 2 Ø 1 ØD 1 J 1 OOT MOUNTIN RT -Stainless Steel ore Type D J 16-2-SS , 25-3-SS ISO 6431, VDM ir ylinders ISO 6431 Ø ØD 1 J 1 1 ROD VIS RT ore Type D J 16-2-SS , 25-3-SS ISO 6432/TOP ylinders Ø 2 ore Type 1 2 J 1 J 16 R-2-SS M6x R-3-SS M8x R-4-SS M10x ROD NUT ore Type 16 RN-2-SS M6x RN-3-SS M8x RN-4-SS M10x MOUNTIN NUT ore Type 16 MN-2-SS M16x , 25 MN-3-SS M22x ISO 6432 P ir ylinders P or Technical ssistance:
Bimba ISO 6432 Air Cylinders
6 1 3 5 2 4 7 meets YOU NDS... eliable Service, World-Wide - rom a world-wide leader producing millions of actuators each year nvironmental - re-lubricated for longer, maintenance free operation Noise
ISO 6431/6432 Cylinders
ISO 6431/6432 ylinders ISO 6431, VDM 24562 ir ylinders 11.2-11.6 ISO 6431 ccessories 11.7-11.9 ISO 6432/ETOP ylinders 11.10-11.22 ISO 6432 ccessories 11.23 PE ir ylinders 11.24-11.26 PE ccessories 11.27
NEW ISO 6431, VDMA ISO 6432 Accessories. PCE Accessories. ISO 6431/6432 Cylinders
ISO 6431/6432 ylinders ISO 6431, VDM 24562 ir ylinders ISO 6431 ccessories ISO 6432/ETOP ylinders ISO 6432 ccessories PE ir ylinders PE ccessories 10.2-10.6 10.7-10.9 10.10-10.22 10.23 10.24-10.26 10.27
Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
Series VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
Medium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
Series Basic Type. ø10, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Series MY1B
MY Series asic Type ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 Series MY earing Minimizing the unit size (dimensions) and combination with other guides is possible. efore Operating Series MY Maximum llowable Moment/Maximum
10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
NEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
Low Friction Cylinders
ow riction ylinders Series Metal Seal Type P.112 Series QT Standard type Q ateral load resisting type (uilt-in ball bushing) ompact ow riction ylinder Series Q Operating pressure range (MPa) 0.00 to 0.
Series NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore
CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod
3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
FT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing
7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H
7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations
How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
Parker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.
ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains
High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
ISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
L & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
Dimensional Data Clevis / Brackets / Pins / rod Eyes
Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001
NFPA Aluminum & Steel Cylinders
Section 11 NFP luminum & Steel ylinders Page T-11-18 ylinder with 01 (MS4) Side Tapped Page T-11-22 ylinder with 03 (MF1) Head ectangular Flange Page T-11-24 ylinder with 03 (M3) Head Square Flange Series
Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø, ø, ø, ø, ø Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø- stroke) % lighter 1.31kg ew 1.54 kg Existing model Easy air cushion control
RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H
" & " ore zcy0 High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For Division Plant Locations See Page II. 65
Series MXS ø6, ø8, ø12, ø16, ø20, ø25
ork table and air cylinder are integrated compactly. ir slide table is ideal for precise assembly. CL Repeatability of work mounting lush mountable auto switches n installed auto switch in the housing
Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A
ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,
Air Slide Table. ø8, ø12, ø16, ø20, ø25. Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke.
ir Slide Table Series MX ø, ø2, ø, ø2, ø2 inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. mm) inear guide provides long stroke, and it obtains
RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators
RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
1.46 L INEAR A CTUATOR: AIR C YLINDER SERIES NCM A IR C YLINDER S ERIES NCM S TAINLESS S TEEL C YLINDERS H OW T O
1.46 L INEAR A CTUATOR: AIR C YLINDER A IR C YLINDER S TAINLESS S TEEL C YLINDERS Double Acting Single Acting / Spring Return / Extended NonRotate Option Available Double Rod Magnetic Piston for Auto Switch
Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".
ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return
Bimba Original Line - Stainless Steel Body Air Cylinders
Bimba Original Line - Stainless Steel Body Air Cylinders How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and
-XC11: Dual Stroke Cylinder/Single Rod Type
Made to Order ommon Specifications: -X11: Dual Stroke ylinder/single Rod Type 23 Dual Stroke ylinder/single Rod Type Two cylinders can be integrated by connecting them in line, and the cylinder stroke
The Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
atalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32" Tube Instant onnections Driving ressure U xhaust ack ressure Thresho
Threshold Sensors... 2-3 locking Valves...4 3-Way, 2-osition Standard Duty... 5-8 Technical Data...9 Dimensions... 10-11 3-Way Miniature...12 Dimensions... Miniature and Standard Duty Limit Switches, ylinder
Linear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
Linear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
2 way basic mounting: Through-hole or both ends tapped
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
Cylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100
ylinder with Lock M Series ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Simple construction force magnifying mechanism is employed based on the wedge
Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
CYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS
YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free
Hygienic Design Cylinder
ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
C-SERIES Rotating Screw Jack 100kN
-SRIS Rotating Screw Jack 100kN MR100 olumn Strength ree Pinned uided ixed Pinned ixed PRMISSI OMPRSSIV O (K) 1.2.10 4 1.1.10 4 1.10 4 9000 8000 7000 6000 5000 4000 3000 2000 1000 OUMN NTH (mm) 0 IX/UI
PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design
ompact ylinder Series QS ø, ø, ø, ø Ideal for machine designs with small space requirements The - and -M auto switches will not protrude from switch mounting groove. Square body shape gives you flexibility
Universal Rod Style Actuators. K Series Linear Actuators
Universal Rod Style ctuators K Series Linear ctuators K Series Linear ctuators The K Series actuators offer xlar s roller screw technology in varying performance levels and allow the use of lower cost
Series HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
Linear guide table provides long stroke. Table rigidity is constant throughout entire stroke. Table for mounting of workpiece
ir Slide Table MX Series ø, ø2, ø, ø, ø2 RoS inear guide table provides long stroke. Table rigidity is constant throughout entire stroke. ong stroke (Max. 00 mm) inear guide provides long stroke, and it
Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention
ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper
Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT
ir ctuated 3-Way all Valves -Port rass, Standard Port 1/4 to 3 SERIES eatures Spring Return or ouble cting Standard Port 3-way flow path irect mount brass valve using standard ISO5211 ctuators designed
Linear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to
ylinder ccessories Page Linear lignment oupler MLOK Rod lamp Flange ouplers and Weld Plates Spherical Rod ccessories 19 150-151 15 15 Milwaukee ylinder provides various cylinder accessories to maximize
PH-3 Series 10" - 20" Bore Heavy-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PH- Series 0" - 0" ore Heavy-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features...06 Specifications and Mountings...0 Design Features...0-09 Mounting Information...0- Double Rod Models...
Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT
ir ctuated all Valves 3-Way T-Port Stainless Steel, ull ore 1/4 to 2 SRIS eatures ull Port 3-way T flow path irect mount valve with standard ISO5211 mount 316 stainless steel body, ball and stem ctuators
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated for long life. Special ra
5.3-5.4 Slide 5.5-5.12 Rodless 5.13-5.23 5.24-5.32 pplication hecklist 5.33 Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
VNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non-Repairable Original Line Steel Repairable (Bell
Mini Free Mount Cylinder
Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded
Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
APCO CVS-6000/6000A SWING CHECK VALVES
ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,
Series HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy
Series LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00
Series L Industrial Interchangeable Pneumatic ylinders atalog L- 0/00 Model Numbers Lin-ct Series L Series L Model Numbers How to Develop Them How to Decode Them Lin-ct Series L cylinders can be completely
Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
Original Line Cylinders
How to Order Introduction to Bimba Standard Air.3.4-.9.0-.65 Three-Position.66-.67 Air with Adjustable Cushions.68-.75 MRS.76-.86 Non-Rotating Air.87-.97 PC.98-.03 All Stainless Steel Repairable (Bell
Series C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25
ISO Cylinder Series C ø, ø0, ø, ø, ø, ø Conforming to ISO and CETOP RPP. Series Variations Standard Series C Series Non-rotating rod Series C ction Double acting Single acting Double acting Rod Single
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
Metric Hydraulic Cylinders Series HMI
Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and
Specification. Tube I.D Port size Rc1/8 Rc1/4. Medium. Ambient temperature. Lubricator
series MIITURE YLIDER eatures on lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a high resistance
Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT
ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance
Specification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature
MM series MINITURE YLINDER Features Non lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a
P1E Series ISO Cylinders
High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane
Product series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders
The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The
Options Many options can be added to our standard cylinders. Options vary by bore size. See individual bore sizes for valid options, pricing and lengt
The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and mounting styles and options. TYPE BXX Block or Trunnion
Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55
55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard
Hydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
Series CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch
ylinder with Lock ouble Acting, Single Rod Series S ø1, ø, ø ow to Order Without auto switch With auto switch S S L L 1 1 1 1 - X16 - X16 uilt-in magnet L 1 ounting style asic style oot style Rod side