Original Line Cylinders

Transcription

1 How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC All Stainless Steel Repairable (Bell Ring Style) Original Line Z Line Air.06-. Rod Lock Hydraulic.6-.2 Hole Punch.22 Original Line Original Line

2 Bimba Original Line Original Line WORKING WITH BIMBA GIVES YOU: The Original stainless steel body cylinder company with more sizes and options than any other manufacturer. Fast service many models and sizes kept in stock for immediate delivery. Worldwide availability through local stocking distributors. Custom-design capabilities for your specific needs. Rod threads rollformed for high strength Low friction Buna N U cup rod seal (optional High or Low temperature options) High strength aluminum alloy porting ends Low friction Buna N U cup piston seals (optional High Temperature option or Low temperature seals) High-strength aluminum alloy piston with blow-by flats OUR ORIGINAL LINE CYLINDER FEATURES AND ADVANTAGES INCLUDE: 304 stainless steel body with mirror finish ID for long, reliable life. Piston rod high strength carbon or Type 303 stainless steel (see page.5 for more info) Oil-impregnated rod guide bushing (except 5/6", 7/6" and 9/6" single acting) Double rolled-in construction Type 304 stainless steel body Piston rod threaded, sealed and riveted Roll-formed rod threads on both ends for high strength. Pre-lubrication with HT-99, our specially-formulated oil compound, for extensive maintenance-free performance. Piston-to-rod connection is threaded, sealed and riveted securely in place. Low breakaway frictional characteristics: collapsible U-cup rod and piston seals; oil-impregnated, sintered bronze rod bushing on most sizes; and breakaway slots on each endcap for fast seal inflation..2 Blow-by flats on double acting model pistons ensures proper seal inflation. 250 psi rating. High strength aluminum alloy porting ends, machined for minimal breakaway during initial pressurization.

3 Bimba Original Line Stainless Steel Body Air How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and mounting styles and options. Please refer to the charts below for an example of model number BR-03-DBEE0.5. This is a rear block, 7/6" bore, 3" stroke double acting cylinder with bumpers and an extra extension of /2". TYPE BXX Block or Trunnion Mounted (BF, BR, BFT, BRT, BFM, BRM, BFTM, BRTM) C Cushion (CR, CF, CS, CM, CRM, CFM, CSM) H Hydraulic cylinder HL Low Pressure Hydraulic (250 PSI maximum) M Magnet option for standard cylinders MRS Magnetic Reed Switch Cylinder SR Stainless rod, if nonstandard BORE SIZE/POWER FACTOR 007 5/6" 0 7/6" 02 9/6" 04 3/4" 06 7/8" 09 -/6" 2 -/4" 7 -/2" 24-3/4" 3 2" 50 2 /2" 70 3" STROKE LENGTH In inches and decimal fractions, i.e..75 (See individual models for standard and maximum stroke) BR-03-DBEE0.5 MOUNTING STYLE (see individual bore sizes for designations) OPTIONS* (in alphabetical order, except for EE which is last) B Bumpers E Seals and factory lubrication for long life in non-lube applications EEX.XX Extra Rod Extension of X.XX F Molycoated body G Magnalube G Lubrication H Heavy Spring (H designated before mounting style) JR Double-Acting Spring Extend JS Double-Acting Spring Return K Ports rotated 90 N Low temperature seals & lubrication NT No Thread Q Side ported rear head T Switch Track (T, T2, T3 or T4) see Related Products, page 8.2 V High temperature seals & lubrication W Rod Wiper Y Pivot bushing replaces pivot pin * Consult your distributor or option combination availability chart page.4. Magnalube is a trademark of Carleton Stuart Corporation. 5/6" /6" 0.5 9/6" /4" 0.4 7/8" 0.6 -/6" 0.9 -/4".2 -/2".7-3/4" 2.4 2" 3. 2-/2" 5.0 3" 7.0 Approximate Power Factors FORCE = Airline x Piston Area Pressure PISTON = Bimba Power Factor AREA FORCE = Airline x Bimba Power Pressure Factor Bimba has made sizing a cylinder as easy as knowing the model number. Each base model number is developed by calculating the area of the cylinder bore. This area, or Power Factor, will provide the force the cylinder will exert when multiplied by the airline pressure..3 For Technical Assistance:

4 Bimba Original Line Stainless Steel Body Air Options Many options can be added to our standard cylinders. Options vary by bore size. See individual bore sizes for valid options, pricing and length adders for that size. Consult specific cylinder types in this catalog for options available for those cylinder types. Option Combination Availability Chart Due to design or compatibility restrictions, the following options may NOT be ordered in combination. For example, option K (ports rotated) and option Q (side ported rear head) are not a valid combination. Options F, NT and EE are available independently, with each other or with all other options or viable option combinations. options W3 4 B2 5 V2 4 H K Y N2 Q G E HL 6 High Heavy Ports Pivot Low Side Ported Magnalube Special Low Pressure size Wiper Bumper Temperature Spring Rotated 90º Bushing Temperature Rear Head G Lube & Seals Hydraulic 007 N/A STD N, E N/A Q STD V,G,E, HL K N, E, HL N, G, V, HL G,N,E,F,H 0 N/A N, HL N, E N/A Q Q B,V,G,E, HL K,Y N, E, HL N, G, V, HL B,G,N,E,F,H 02 N/A N, HL N, E N/A Q STD B,V,G,E, HL K N, E, HL N, G, V, HL B,G,N,E,F,H 04, 09, 7 H,N N, HL N, E W, HL Q Q W,B,V,G,E, HL K,Y N, E, HL N, G, V, HL B,G,N,E,F,H 06, 2, 24 N/A STD, HL N, E N/A Q Q V,G,E, HL K,Y N, E, HL N, G, V, HL B,G,N,E,F,H 3, 50 N/A N, HL N, E N/A Q STD B,V,G,E, HL K N, E, HL N, G, V, HL B,G,N,E,F,H 70 N/A N, HL N, E N/A Q STD V,G,E, HL K N, E, HL N, G, V, HL B,G,N,E,F,H Notes: Option M is designated as a prefix, (ie M-04-DXP). When M is specified, the piston rod will be made of 303 stainless steel. Certain bore sizes and mounting styles offer the stainless rod standard. 2 When bumpers are standard and high or low temperature option is specified, the bumpers are omitted and the overall length of the cylinder may decrease. When bumpers and high temperature are ordered as options on the same cylinder, the bumper material will be standard Buna N. 3 Wipers are available in double acting and reverse single acting models only. Wipers may not be available with certain mounting configurations. Consult the specific bore size in this catalog for detail. 4 When high temperature and the magnetic options are combined, operating temperature remains at 200 F. This combination is recommended when Fluoroelastomer seals are specified for compatibility. When specifying the high temperature and wiper options together, a standard Buna N or Urethane wiper will be provided. 5 Bumpers are available in only double acting models for the 7 and 3 bores. 6 Option HL applies only to Double Acting Original Line cylinders and is not available with the following series: Cushion, PC, MRS, NR, Z-Line, DNR, 500 Hydraulic and Multiple Position. Overall Length Reductions for Options N & V Double Acting 0070-DV.08" 0070-DXPN.08" BF-0070-DN.08" 060-D (V or N).22" 060-DXP (V or N).22" 060-DXDE (V or N).25" 20-D (V or N).9" 20-DP (V or N).9" 20-DXDE (V or N).25" 20-DXDEH (V or N).25" 240-D (V or N).25" 240-DP (V or N).25" 240-DXDE (V or N).25" *0070 bumpers are high temperature option material and not removed when high temperature option is specified. Single Acting 0070-N.04" 0070-XPN.04" 0070-RN.04" 0070-RPN.04" 060- (V or N).09" 060-NR (V or N).09" 060-RP (V or N).25" 060-R (V or N).25" 20- (V or N).25" 20-NR (V or N).25" 20-NRP (V or N).25" 20-P (V or N).25" 20-R (V or N).25" 20-RP (V or N).25" 240- (V or N).25" 240-NR (V or N).25" 240-P (V or N).25" 240-R (V or N).25".4 The switch track and port orientation when ordering the Z (Switch Track) & K (Ports Rotated) options on an Original Line MRS cylinder is shown Below. Double track option Z and K cannot be ordered in combination. MRS- -DXP MRS- -DXPZK

5 Bimba Original Line Stainless Steel Body Air Accessories Lubrication Accessories have separate catalog numbers and are shown at the end of each bore size section. Most accessories are zinc-plated carbon steel. We also offer stainless steel accessories in some bore sizes. All BIMBA cylinders are prelubricated with our special HT-99 lubrication and sealed at the factory for extensive maintenance-free life. Cylinder life can be lengthened by providing additional lubricant with an air line mist lubricator or direct introduction of oil to the cylinder every 500 hours of operation. Both Magnalube G and HT-99 can now be purchased from your Bimba distributor. MAG-G-3CC $5.80/bag HT-99-7CC $3.5/bag (each bag contains six ampules) Requirements will vary depending on the application. In general, one ampule will provide 500 hours of lubrication service for one - 2" bore, 2" stroke double acting cylinder. Other recommended oils for Buna N seals are medium to heavy inhibited, nondetergent hydraulic and general purpose oil. For cylinders with high temperature seals, use Dow Corning #70. For cylinders with low temperature seals, Dow Corning #55 grease is recommended. Piston Rod Material Magnalube G can be ordered by specifying option G. Magnalube G s non-migratory properties provide benefits in applications where migration of lubricant can be problematic for cylinder performance or the application. Molycoating is available as standard option F. It is a dry, thin film of lubricant on the cylinder wall that can reduce piston seal wear. Bimba s new option E provides a proprietary combination of seal material and lubrication for extended life in nonlubricated environments. Other types of factory lubrication are available as required. Standard models feature ground and polished, high strength carbon steel piston rod or ground and roller burnished type 303 stainless steel. Stainless steel can also be ordered as an option on most models (see models for pricing). Stainless steel is standard on the following models: All 5/6", 7/6" and 9/6" bore cylinders All cylinders with adjustable cushions All 9/6" through 3" bore cylinders ordered with Magnet (M) option MRS cylinders Z Line cylinders Block and Trunnion-mounted cylinders Universal mount, double-end rod cylinders Hard chrome plated rod is standard on 500 Hydraulic cylinders. Temperature Range Buna N seals with a temperature range of -20 F (-29 C) to 200 F (95 C) are standard in all BIMBA air cylinders. Fluoroelastomer seals rated for higher temperature applications (up to 400 F) are available. If cylinders are operated at temperatures below 0 F for extended time periods, our low temperature seal and lubrication option (N) is recommended. This option has a temperature range of -40 F to 200 F. If cylinders are operated below -20 F with low temperature seals for extended time periods, cylinder performance will be affected by the cold temperature..5 For Technical Assistance:

6 Bimba Original Line Stainless Steel Body Air Mounting Free Test Cylinder Special Delivery/ Availability Choosing the Right Cylinder Cylinder Life Expectancy Mounting should be by the threaded stud ends, pivot or bolt holes provided. Mount cylinders to provide alignment with the driven mechanism, avoiding side loads that restrict the free operation of the cylinder. Since 975, our policy has been to provide a FREE TEST CYLINDER to any qualified original equipment manufacturer. This service is provided at no obligation, but we would appreciate a copy of your test results. Contact us or your local stocking BIMBA distributor for more information. Do you have a complicated or unusual application? BIMBA will custom-design and build the cylinder that will solve your problem. Whatever your needs special stroke, mounting styles, rod-end configurations, seal materials, dimensional changes, etc. contact us or your local stocking BIMBA distributor. Bimba cylinders are sold through local stocking distributors. Each distributor maintains an inventory of our most popular models. At the factory, Bimba classifies cylinders as shelving and nonshelving models. More than 25,000 units of various shelving models are kept in stock for immediate delivery. Standard stroke lengths shown in blue are stocked at Bimba. (Most stocked models shown in blue do not include options.) These stroke lengths are available in limited quantities for immediate shipment. Bimba also stocks a large quantity of cylinders with options such as stainless steel rods or bumpers. Nonstocked standard models are manufactured within 5 working days. See Bimba handbook, Tips for Maximizing Cylinder Performance, for more information on choosing cylinder types, sizes, options and accessories. Bimba cylinders have been designed and tested for a rated life of 400 miles of travel when properly applied and lubricated per recommendations. Bimba s option E has been designed and tested for a rated life of 2,800 miles of travel when properly applied in an unlubricated environment..6

7 Bimba Original Line Stainless Steel Body Air Types of Bimba manufactures several different types of Original Line cylinders for your applications. These include the basic 5/6" to 3" bore cylinders described on pages Weights published for each cylinder are approximate. Additional styles include: Three-Position This multi-position Original Line stainless body cylinder provides three positive stroke positions with a single cylinder. Cushion These include adjustable air cushions that slow cylinder speed at the end of stroke, reducing impact and extending cylinder life. Cushions can be ordered on rear, front or both ends, and can be ordered in combination with magnetic pistons. MRS These include a magnet on the piston, designed to operate Bimba switches to actuate programmable controllers, relays, solenoids, timers or other electrically operated equipment. Dimensional differences from the basic Original Line include larger mounting threads and longer overall lengths in certain bore sizes. Non-Rotating Double acting and reverse acting non-rotating cylinders have a unique square piston rod with rounded corners. They are dimensionally interchangeable with the standard Original Line. PC These cylinders include acetal resin end caps. They are ideal for applications and environments that require exposure to moisture, lubricants and specific solvents. All dimensions except 2" bore nose threads are interchangeable with the Original Line. All Stainless Repairable The new all stainless repairable Original Line cylinders are ideal for food processing, chemical, medical, pharmaceutical, offshore or marine equipment, and energy production or waste management applications. The bell ring design also offers the added benefit of full repairability without the need for hand tools by securing the body to the rod guide with a knurled, threaded nut. Z-line For extremely tough applications, with larger diameter, two-piece piston rod, elastomer bumpers and Buna N U-cup seals for low breakaway. Rod Lock This cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut down. 500 Hydraulic For hydraulic use, up to 500 psi. Low Pressure Hydraulic Designed for use in low pressure hydraulic circuits with pressures not exceeding 250 psi. The design incorporates chrome plated piston rods and block-vee seals. Hole Punchers These are designed to punch millions of holes in thin film or plastic materials 2 to 3 mils thick..7 For Technical Assistance:

8 Bimba Original Line Stainless Steel Body Air Stroke Lengths Fractional Stroke Lengths Standard stroke lengths and recommended maximum stroke lengths are listed in each model description. Special stroke lengths are available upon request. Stroke lengths are available in lengths longer than published, but an application review may be required. The cost per inch of stroke is listed below the base price of each cylinder. On models with /2" standard stroke length increments, add /2 of the per inch price for the /2" inch of stroke. NOTE ON ROD MATERIAL: Bore sizes 3/4" to -3/4": rod lengths greater than 2" (stroke plus extra extension) require a stainless steel rod. Bore sizes 2" to 3": rod lengths greater than 6" require a stainless steel rod. Rod length equals stroke plus extension. Fractional stroke lengths for single and reverse acting cylinders, both standard and nonstandard, require special calculations to determine cylinder dimensions. The following equations apply: Single Acting Calculate the length of next whole standard increment of stroke, then subtract the difference between desired stroke and next longer whole increment of stroke. Example: Base length =.94" Plus.56 per inch of stroke = ".56 X 3.0 (next longer stroke increment) 093 length = 6.62 Whole stroke increment = 3.00" Minus desired stroke = Stroke difference = length = 6.37" Reverse Acting Calculate length of next longer standard increment of stroke, then subtract twice the difference between desired stroke and next longer standard increment of stroke. Example: RP 00-RP Base length = 2.38" Plus.44 per each 0.5" of stroke = X 4 (number of standard increments required for the next longer increment) 02-RP length = 8.4 Standard stroke increment = 2.000" Minus desired stroke = Stroke difference =.375 Twice stroke difference = length = 7.39" Double Acting Add desired stroke length to base length of cylinder. Example: D 040-D Base Length = 2.97" Plus.25" stroke = D length = 4.22 NOTE: Additional charges may be added for small quantity orders of fractional, nonstandard stroke lengths. Consult your local stocking BIMBA distributor. Bore Size Spring Forces (approximate) Heavy Spring Relaxed Compressed Relaxed Compressed (lbs.) (lbs.) (lbs.) (lbs.) 5/6".5 7/6" 2 9/6" 2 4 3/4" /8" 3 6 -/6" /4" /2" /4" 24 2" 5 30 NOTES Heavy spring option may increase cylinder overall length Spring forces listed are for whole strokes.8

9 Bimba Original Line Stainless Steel Body Air Nose Mount Torque Values Pressure Rating Thread Size Torque (IN*LB) FT*LB Bore Size /4-28 UNF (27.6) 2.3 5/6" (007) 3/8-24 UNF (60) 5 5/6" (007) & 7/6" (0) 7/6-20 UNF (84) 7 7/6" (0) & 9/6" (02) /2-20 UNF (44) 2 3/4" (04) 5/8-8 UNF (336) 28 3/4" (04), 7/8" (06) & -/6" (09) 3/4-6 UNF (480) 40 3/4" (04), -/6" (09), -/4" (2) & -/2" (7) 7/8-6 UNF (780) 65 -/6" (09), -/4" (2) & -/2" (7) -4 UNS (200) 00 -/2" (7) & -3/4" (24) /8-2 UNF (320) 0 -/2" (7) & -3/4" (24) /4-2 UNF (440) 20 2" (3) 3/8-2 UNF (560) 30 2-/2" (50) /2-2 UNF (680) 40 3" (70) Original Line, Cushioned Original Line, NR series, Z-line, MRS and hole punchers = 250 psi. PC cylinder = 00 psi. Bimba 500 Hydraulic = 500 psi hydraulic. Reservoirs = 250 psi..9 For Technical Assistance:

10 5/6" Bore Air Ground and Roller Burnished 303 Stainless Steel Piston Rod Standard Force Exerted Approximately 0.07 of Air Line Pressure Enclosed Spring Force:.5 lb. Relaxed lb. Compressed Cushion Quiet Bumpers Standard on All Models OPTIONS: (also see Option Combination Availability Chart Page.4) MAGNALUBE G (G) - NO CHARGE PORTS ROTATED (K)* - NO CHARGE NO THREAD (NT) - NO CHARGE *Rod guide port rotated 90 clockwise in BF model. SIDE PORTED REAR HEAD (Q) Add.20" to nose mount overall length EXTRA EXTENSION (EE) Add per inch of extension DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting add Double acting add Reverse acting add OPTIONS continued HIGH TEMPERATURE U CUPS (V) (overall length does not change) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting add Double acting add Reverse acting add ROD WIPER (W) (not available in standard single acting) Add MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting add Double acting add MAGNETIC POSITION SENSING (M) Add Add.5" to overall length Must specify track(s) for use with Bimba s miniature position sensing (T2, T3, T4) Add per track. See Related Products, page 8.2 for details. LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Enter Stroke Length as 4th Digit 007 $0.05 Add $.75 per inch of stroke Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-2673 Mounting Bracket Base Weight:.03 Adder Per Inch of Stroke: XP $3.5 Add $.75 per inch of stroke 007 -R $5.40 Add $.75 per inch of stroke Single Acting Spring Return Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-2673 Mounting Bracket D Pivot Bracket D Piston Rod Clevis Base Weight:.04 Adder Per Inch of Stroke:.02 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3" Maximum Stroke 4" D Mounting Bracket Base Weight:.05 Adder Per Inch of Stroke:.03 See page.8 for length calculation of fractional stroke for single acting cylinders.0

11 5/6" Bore Air 007 -RP $9.50 Add $.75 per inch of stroke 007 -D $4.05 Add $.20 per inch of stroke 007 -DXP $7.40 Add $.20 per inch of stroke BF-007 -D $2.35 Add $.20 per inch of stroke Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3" Maximum Stroke 4" D Mounting Bracket D Pivot Bracket D Piston Rod Clevis Base Weight:.05 Adder Per Inch of Stroke:.03 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D Mounting Bracket Base Weight:.05 Adder Per Inch of Stroke:.0 Double Acting Air Return Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D Mounting Bracket D Pivot Bracket D Piston Rod Clevis Base Weight:.06 Adder Per Inch of Stroke:.0 Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" Base Weight:.05 Adder Per Inch of Stroke:.0.6 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch. For Technical Assistance:

12 5/6" Bore Air D A $3.05 PACKAGE OF SIX 5/6" Bore Accessories D-2673 $.70 D $.70 Aluminum Alloy Barbed Fitting. 4" Hose (O.D.) Barbed Fitting Supplied with Gasket, No to 4" O.D. Tubing. D $3.00 Mounting Bracket (for Single Acting Models) D-855-A $.65 Mounting Bracket (for Double Acting Models) D $3.00 Pivot Bracket with Pin D-344 $.30 Adaptors (0-32 to /8 NPT Female) Supplied with Gasket D-80 $.30 Piston Rod Clevis (with Pin) Mounting Nut Mounting Nut.2

13 7/6" Bore Air Ground and Roller Burnished 303 Stainless Steel Piston Rod Standard Force Exerted Approximately 0.5 of Air Line Pressure Enclosed Spring Force: lb. Relaxed 2 lbs. Compressed OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) (Not available in block mount) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.9" to nose mount overall length PIVOT BUSHING (Y).57" ID (Use bracket D-232-A) SINGLE AND REVERSE ACTING BUMPER (B) additional Add.062 to overall length; Reverse acting, add.25 DOUBLE ACTING BUMPER (B) additional Add.88 to overall length DXDE; add.250 EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders Enter Stroke Length as 3rd Digit OPTIONS continued LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting add Reverse acting add Double acting add DXDE add HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting add Double acting add DXDE add Reverse acting add MAGNET (prefix M) Add Add 0.25" to Double Acting overall length Add 0.20" to Single Acting overall length Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting add Double acting add DXDE add ROD WIPER (W) (not available in standard single acting) Add LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Standard Air Three-Position Cushion MRS Non-Rotating Air PC 0 $0.60 Add $.95 per inch of stroke 0 -NR $3.0 Add $.95 per inch of stroke Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-775 Mounting Bracket Base Weight:.04 Adder Per Inch of Stroke:.04 Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-775 Mounting Bracket Base Weight:.04 Adder Per Inch of Stroke:.04 See page.8 for length calculation of fractional stroke for single acting cylinders.3 For Technical Assistance: All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch

14 7/6" Bore Air 0 -NRP $6.35 Add $.95 per inch of stroke 0 -P $3.95 Add $.95 per inch of stroke 0 -R $6.0 Add $.95 per inch of stroke 0 -RP $20.5 Add $.95 per inch of stroke 0 -D $4.75 Add $.40 per inch of stroke Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-850 Rod Clevis D-780 Pivot Brackets Base Weight:.04 Adder Per Inch of Stroke:.04 Single Acting Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-780 Pivot Brackets D-850 Piston Rod Clevis Base Weight:.04 Adder Per Inch of Stroke:.04 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3" D-770 Mounting Bracket Base Weight:.08 Adder Per Inch of Stroke:.03 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3" D-780 Pivot Brackets D-850 Piston Rod Clevis Base Weight:.08 Adder Per Inch of Stroke:.03 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" D-770 Mounting Bracket Base Weight:.07 Adder Per Inch of Stroke:.02.4

15 7/6" Bore Air 0 -DP $7.85 Add $.40 per inch of stroke 0 -DX $8.20 Add $.40 per inch of stroke 0 -DXDE $23.30 Add $.85 per inch of stroke BF-0 $8.95 Add $.95 per inch of stroke Double Acting Double End Mount Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" D-770 Mounting Bracket Base Weight:. Adder Per Inch of Stroke:.02 Double Acting Double End Rod Air Return Double End Mount 2", ", 2", 2", 2 2", 3", 4" D-770 Mounting Bracket Base Weight:.4 Adder Per Inch of Stroke:.03 BF-0 -D $22.85 Add $.40 per inch of stroke Double Acting Pivot Type Air Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" D-780 Pivot Brackets D-850 Piston Rod Clevis Base Weight:.08 Adder Per Inch of Stroke:.02 7/6" Bore Block Mounted Air Single Acting Front Block Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.07 Adder Per Inch of Stroke:.04 Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" Base Weight:.07 Adder Per Inch of Stroke:.02 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.5 For Technical Assistance:

16 7/6" Bore Air BR-0 $8.35 Add $.95 per inch of stroke BR-0 -D $22.50 Add $.40 per inch of stroke 7/6" Bore Block Mounted Air (continued) Double Acting Rear Block Mounting for Vertical Positioning Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" Base Weight:.08 Adder Per Inch of Stroke:.02 7/6" Bore Trunnion Mounted Air BFT-0 $25.90 Add $.95 per inch of stroke Single Acting Rear Block Mounting for Vertical Positioning Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.05 Adder Per Inch of Stroke:.04 Single Acting Front Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB- Trunnion Brackets D-850 Rod Clevis Base Weight:.09 Adder Per Inch of Stroke:.04 BFT-0 -D $29.85 Add $.40 per inch of stroke BRT-0 $25.30 Add $.95 per inch of stroke Double Acting Front Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB- Trunnion Brackets D-850 Rod Clevis Base Weight:.09 Adder Per Inch of Stroke:.02 Single Acting Rear Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB- Trunnion Brackets D-850 Rod Clevis Base Weight:.07 Adder Per Inch of Stroke:.04.6

17 7/6" Bore Air 7/6" Bore Trunnion Mounted Air (continued) Standard Air BRT-0 -D $29.25 Add $.40 per inch of stroke Double Acting Rear Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB- Trunnion Brackets D-850 Rod Clevis Base Weight:.0 Adder Per Inch of Stroke:.02 Three-Position Cushion 7/6" Bore Accessories D-775 $2.05 D-770 $2.20 D-780 $2.85 MRS Non-Rotating Air Mounting Bracket (for Single Acting Models) TRB- $8.25 Mounting Bracket (for Double Acting Models) D A $3.05 PACKAGE OF SIX Pivot Brackets D-850 $3.05 PC All Stainless Repairable Trunnion Brackets Anodized Aluminum Alloy Barbed Fitting. 4" Hose (O.D.) Barbed Fitting Supplied with Gasket, No to 4" O.D. Tubing. Piston Rod Clevis Z Line Air D-855-A $.65 D-80 $.30 D-54 $.30 Rod Lock Adaptors (0-32 to 8 NPT Female) Supplied with Gasket Mounting Nut Mounting Nut 500 Hydraulic Hole Punch.7 For Technical Assistance:

18 9/6" Bore Air Ground and Roller Burnished 303 Stainless Steel Piston Rod Standard Force Exerted Approximately 0.25 of Air Line Pressure Enclosed Spring Force: 2 lbs. Relaxed 4 lbs. Compressed OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.03" to nose mount overall length SINGLE AND REVERSE ACTING BUMPER (B) additional Add.062 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders Enter Stroke Length as 3rd Digit OPTIONS continued MAGNET (prefix M) Add Single and reverse acting add.25" to overall length See Related Products, page 8.2 for switch details & mounting selection Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting add Reverse acting add Double acting add DXDE add HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting add Double acting add Double end rod add Reverse acting add MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting add Double acting add DXDE add ROD WIPER (W) (not available in standard single acting) Add LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add 02 $.30 Add $.95 per inch of stroke Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-770 Mounting Bracket Base Weight:.06 Adder Per Inch of Stroke: NR $3.85 Add $.95 per inch of stroke Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-770 Mounting Bracket Base Weight:.06 Adder Per Inch of Stroke:.05 See page.8 for length calculation of fractional stroke for single acting cylinders.8

19 9/6" Bore Air 02 -NRP $7.40 Add $.95 per inch of stroke 02 -P $4.75 Add $.95 per inch of stroke 02 -R $7.0 Add $.95 per inch of stroke 02 -RP $20.65 Add $.95 per inch of stroke 02 -D $5.05 Add $.40 per inch of stroke Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-850 Rod Clevis D-232-A Pivot Bracket Base Weight:.06 Adder Per Inch of Stroke:.05 Single Acting Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-850 Rod Clevis D-232-A Pivot Bracket Base Weight:.06 Adder Per Inch of Stroke:.05 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3" D-770 Mounting Bracket Base Weight:.08 Adder Per Inch of Stroke:.04 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3" D-850 Rod Clevis D-232-A Pivot Bracket Base Weight:.08 Adder Per Inch of Stroke:.04 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" D-770 Mounting Bracket Base Weight:.09 Adder Per Inch of Stroke:.02 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.9 For Technical Assistance:

20 9/6" Bore Air 02 -DXP $8.35 Add $.40 per inch of stroke 02 -DXDE $24.80 Add $.85 per inch of stroke Double Acting Double End or Rear Pivot Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" D-770 Mounting Bracket D-850 Rod Clevis D-232-A Pivot Bracket Base Weight:.09 Adder Per Inch of Stroke:.02 Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4" D-770 Mounting Bracket Base Weight:.6 Adder Per Inch of Stroke:.03 D-770 $2.20 9/6" Bore Accessories D-850 $3.05 D-232-A $3.35 Mounting Bracket D-54 $.30 Piston Rod Clevis Pivot Bracket with Pin Mounting Nut Note: For stainless steel accessories see page.99 and

21 3/4" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 0.4 of Air Line Pressure Enclosed Spring Force: 3 lbs. Relaxed 6 lbs. Compressed Rod Wipers Available on D, DP, DXP and DXDE Models 04 $.75 Add $.95 per inch of stroke OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.44" to nose mount overall length PIVOT BUSHING (Y).250" ID SINGLE AND REVERSE ACTING BUMPER (B) additional Add.25 to overall length DOUBLE ACTING BUMPERS (B) additional No change in overall length EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders Enter Stroke Length as 3rd Digit OPTIONS continued ROD WIPER (W) (not available in standard single acting) (now available in block mount) Double acting DXDE HEAVY SPRING (available on single acting and reverse acting) (H) Add Spring Force: 4 lbs. relaxed 0 lbs. compressed MAGNET (prefix M) Single and reverse acting add.25" to overall length Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting add Reverse acting add Double acting add DXDE add HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting add Double acting add Double end rod add Reverse acting add MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting add Double acting add DXDE add STAINLESS STEEL ROD (prefix SR) Add Standard on M option, block mount, DXP and DXDE models LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-226 Mounting Bracket Base Weight:.0 Adder Per Inch of Stroke:.08 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 04 -NR $4.30 Add $.95 per inch of stroke Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-226 Mounting Bracket Base Weight:.0 Adder Per Inch of Stroke:.08 See page.8 for length calculation of fractional stroke for single acting cylinders.2 For Technical Assistance: Hydraulic Hole Punch

22 3/4" Bore Air 04 -NRP $7.85 Add $.95 per inch of stroke 04 -P $5.05 Add $.95 per inch of stroke 04 -R $7.30 Add $.95 per inch of stroke 04 -RP $20.80 Add $.95 per inch of stroke 04 -LS or LSC Conduit Outlet* $65.00 Add $.95 per inch of stroke *Add $.85 for Conduit Outlet Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.2 Adder Per Inch of Stroke:.08 Single Acting Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.3 Adder Per Inch of Stroke:.08 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.8 Adder Per Inch of Stroke:.07 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.8 Adder Per Inch of Stroke:.07 Single Acting Built-in Midget 3- Way Solenoid Operated Valve Spring Return Front Nose Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-226 Mounting Bracket Base Weight:.38 Adder Per Inch of Stroke:.08.22

23 3/4" Bore Air 04 -NRLS or NRLSC Conduit Outlet* $67.90 Add $.95 per inch of stroke *Add $.85 for Conduit Outlet 04 -D $5.5 Add $.40 per inch of stroke 04 -DP $8.25 Add $.40 per inch of stroke 04 -DXP $20.25 Add $.40 per inch of stroke Single Acting Non-rotating Hexagon Piston Rod Built-in Midget 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-226 Mounting Bracket Base Weight:.46 Adder Per Inch of Stroke:.08 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.2 Adder Per Inch of Stroke:.03 Double Acting Pivot Type Air Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.2 Adder Per Inch of Stroke:.03 Double Acting Double End or Rear Pivot Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-29 Mounting Bracket D-3498-A Pivot Bracket D-66-3 Piston Rod Clevis Base Weight:.29 Adder Per Inch of Stroke:.03 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.23 For Technical Assistance:

24 3/4" Bore Air 04 -DXDE $28.35 Add $.85 per inch of stroke BF-04 $20.40 Add $.95 per inch of stroke Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.37 Adder Per Inch of Stroke:.04 3/4" Bore Block Mounted Single Acting Front Block Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.8 Adder Per Inch of Stroke:.08 BF-04 -D $24.00 Add $.40 per inch of stroke BF-04 -R $25.75 Add $.95 per inch of stroke Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.22 Adder Per Inch of Stroke:.03 Pull Type Front Block Mounting Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.9 Adder Per Inch of Stroke:.07.24

25 3/4" Bore Air BF-04 -LS or LSC* $74.05 Add $.95 per inch of stroke *Add $.85 for Conduit Outlet 3/4" Bore Block Mounted (continued) Built-in Midget 3-Way Solenoid Operated Valve Single Acting Spring Return Front Block Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. Base Weight:.38 Adder Per Inch of Stroke:.08 Standard Air Three-Position Cushion BR-04 $20.40 Add $.95 per inch of stroke BR-04 -D $23.50 Add $.40 per inch of stroke BR-04 -R $25.75 Add $.95 per inch of stroke Single Acting Rear Block Mounting for Vertical Positioning Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.5 Adder Per Inch of Stroke:.08 Double Acting Rear Block Mounting for Vertical Positioning Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.26 Adder Per Inch of Stroke:.08 Pull Type Rear Block Mounting for Vertical Positioning Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.5 Adder Per Inch of Stroke:.08 MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.25 For Technical Assistance:

26 BFT-04 $28.20 Add $.95 per inch of stroke 3/4" Bore Air 3/4" Bore Trunnion Mounted Single Acting Front Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB-2 Trunnion Brackets D-66-3 Rod Clevis Base Weight:.24 Adder Per Inch of Stroke:.08 BFT-04 -D $3.70 Add $.40 per inch of Stroke BRT-04 $26.30 Add $.95 per inch of stroke BRT-04 -D $29.75 Add $.40 per inch of stroke Double Acting Front Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-66-3 Rod Clevis Base Weight:.29 Adder Per Inch of Stroke:.03 Single Acting Rear Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB-2 Trunnion Brackets D-66-3 Rod Clevis Base Weight:.9 Adder Per Inch of Stroke:.08 Double Acting Rear Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-66-3 Rod Clevis Base Weight:.28 Adder Per Inch of Stroke:.03.26

27 3/4" Bore Air 3/4" Bore Adjustable Stroke Standard Air 04 -A $23.65 Add $.95 per inch of stroke Single Acting Spring Return Adjustable Stroke Double End Mounting Brass Piston Rod Bearing and Stroke Adjustment in ", 2", 3". Mounting Brackets are included. " Stroke Adjusts 0" ", 2" Stroke " 2", and 3" Stroke 2" 3" Base Weight:.40 Adder Per Inch of Stroke:.07 Three-Position Cushion 04 -RA $24.60 Add $.95 per inch of Stroke 04 -AP $23.25 Add $.95 per inch of stroke Reverse Single Acting Pull Type Rod Normally Extended Nose Mounting Stroke Adjustment in ", 2", 3". " Stroke Adjusts 0" ", 2" Stroke " 2", and 3" Stroke 2" 3" D-29 Mounting Bracket Base Weight:.23 Adder Per Inch of Stroke:.07 Single Acting Pivot Type Rear Pivot Mounting Stroke Adjustment in ", 2", 3". " Stroke Adjusts 0" ", 2" Stroke " 2", and 3" Stroke 2" 3" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.23 Adder Per Inch of Stroke:.07 MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.27 For Technical Assistance:

28 3/4" Bore Air D-226 $.95 3/4" Bore Accessories D-29 $2.45 D-67 $2.85 Mounting Bracket (for Single Acting Models) D-3498-A $3.30 Mounting Bracket (for Double Acting Models) TRB- 2 $8.25 Pivot Brackets D-66-3 $3.30 Pivot Bracket D-9 $.40 Trunnion Brackets D -98 $.40 Piston Rod Clevis Mounting Nut Mounting Nut Note: For stainless steel accessories see page.99 and

29 7/8" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 0.6 of Air Line Pressure Enclosed Spring Force: 3 lbs. Relaxed 6 lbs. Compressed Cushion Quiet Bumpers Standard on All Models OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.28" to nose mount overall length PIVOT BUSHING (Y).250" ID EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders MAGNET (prefix M) All models add.25" to overall length Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. OPTIONS continued LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting add Reverse acting add Double acting add DXDE add HIGH TEMPERATURE U CUP SEALS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting add Double acting add DXDE add Reverse acting add MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting add Double acting add DXDE add ROD WIPER (W) (not available in standard single acting) Add STAINLESS STEEL ROD (prefix SR) Add Standard on DXP, DXDE, and M option LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Enter Stroke Length as 3rd Digit Standard Air Three-Position Cushion MRS Non-Rotating Air PC 06 $2.55 Add $2.20 per inch of stroke 06 -NR $4.85 Add $2.20 per inch of stroke Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.7 Adder Per Inch of Stroke:.09 Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.7 Adder Per Inch of Stroke:.09 See page.8 for length calculation of fractional stroke for single acting cylinders.29 For Technical Assistance: All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch

30 7/8" Bore Air 06 -NRP $8.60 Add $2.20 per inch of stroke 06 -P $6.00 Add $2.20 per inch of stroke 06 -R $8.55 Add $2.20 per inch of stroke 06 -RP $2.95 Add $2.20 per inch of stroke 06 -D $6.65 Add $.40 per inch of stroke Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.7 Adder Per Inch of Stroke:.09 Single Acting Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.7 Adder Per Inch of Stroke:.09 Reverse Single Acting Pull Type Rod Normally Extended Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.20 Adder Per Inch of Stroke:.09 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66-3 Piston Rod Clevis D-67 Pivot Brackets Base Weight:.20 Adder Per Inch of Stroke:.09 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-29 Mounting Bracket Base Weight:.25 Adder Per Inch of Stroke:.03.30

31 7/8" Bore Air 06 -DXP $22.00 Add $.40 per inch of stroke 06 -DXDE $29.80 Add $.85 per inch of stroke Double Acting Double End or Rear Pivot Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-66-3 Piston Rod Clevis D-29 Mounting Bracket D-3498-A Pivot Bracket Base Weight:.32 Adder Per Inch of Stroke:.03 Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-29 Mounting Bracket Base Weight:.39 Adder Per Inch of Stroke:.06 Standard Air Three-Position Cushion MRS Non-Rotating Air D-29 $2.45 7/8" Bore Accessories D-3498-A $3.30 D-67 $2.85 PC All Stainless Repairable Z Line Air Mounting Bracket D-66-3 $3.30 Pivot Bracket D-9 $.40 Pivot Brackets Rod Lock 500 Hydraulic Rod Clevis Mounting Nut Hole Punch.3 For Technical Assistance:

32 -/6" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 0.9 of Air Line Pressure Enclosed Spring Force: 3 lbs. Relaxed 6 lbs. Compressed Rod Wipers Available on D, DP, DX and DXDE Models OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K)* *Front port rotated 90 on BF-090-D. NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.25" to nose mount overall length PIVOT BUSHING (Y).250" ID SINGLE AND REVERSE ACTING BUMPER (B) additional Add.25 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length Models DXDE and DXDEH add.500 EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DXDE hollow rod, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders HEAVY SPRINGS (H) are standard on all single acting block front and block rear mount and NRLSC models, and reverse acting except RA type. For all other single acting, add Spring Force: 6 lbs. relaxed 2 lbs. compressed OPTIONS continued MAGNET (prefix M) Single acting and DXDE add.25" to overall length Use bumper length adder for DXDE and DXDEH when magnet and bumper are ordered together. Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting add Reverse acting add Double acting add DXDE add HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting add Double acting add DXDE add Reverse acting add ROD WIPER (W) (not available in standard single acting) (now available in block mount) Double acting, add DXDE, add MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting add Double acting add DXDE add STAINLESS STEEL ROD (prefix SR) Add Standard on DX, DXDE, DXDEH, All block mountings and M option LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Enter Stroke Length as 3rd Digit 09 $3.5 Add $2.40 per inch of stroke 09 -NR $5.50 Add $2.40 per inch of stroke Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.23 Adder Per Inch of Stroke:. Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.25 Adder Per Inch of Stroke:.2 See page.8 for length calculation of fractional stroke for single acting cylinders.32

33 -/6" Bore Air 09 -NRP $9.0 Add $2.40 per inch of stroke 09 -P $6.45 Add $2.40 per inch of stroke 09 -R $9.20 Add $2.40 per inch of stroke 09 -RP $22.85 Add $2.40 per inch of stroke Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66- Piston Rod Clevis D-67 Pivot Brackets Base Weight:.25 Adder Per Inch of Stroke:.2 Single Acting Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66- Piston Rod Clevis D-67 Pivot Brackets Base Weight:.24 Adder Per Inch of Stroke:. Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.24 Adder Per Inch of Stroke:.6 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-66- Piston Rod Clevis D-67 Pivot Brackets Base Weight:.22 Adder Per Inch of Stroke:.6 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.33 For Technical Assistance:

34 -/6" Bore Air 09 -S or SC* $64.5 Add $2.40 per inch of stroke *Add $2.40 for Conduit Outlet 09 -NRS or NRSC* $66.90 Add $2.40 per inch of stroke *Add $2.40 for Conduit Outlet 09 -LS or LSC* $67.00 Add $2.40 per inch of stroke *Add $.85 for Conduit Outlet Single Acting Built-in 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 00 PSI, 6" Orifice Standard 50 PSI, 3 64" Orifice Optional 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-29 Mounting Bracket Base Weight:. Adder Per Inch of Stroke:. Single Acting Built-in 3-Way Solenoid Operated Valve Nonrotating Hexagon Piston Rod Spring Return Front Nose Mounting 00 PSI, 6" Orifice Standard 50 PSI, 3 64" Orifice Optional 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-29 Mounting Bracket Base Weight:.3 Adder Per Inch of Stroke:.2 Single Acting Built-in Midget 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-29 Mounting Bracket Base Weight:.20 Adder Per Inch of Stroke:..34

35 -/6" Bore Air 09 -NRLS or NRLSC* $69.35 Add $2.40 per inch of stroke *Add $.85 for Conduit Outlet Single Acting Non-rotating Hexagon Piston Rod Built-in Midget 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-29 Mounting Bracket Base Weight:.20 Adder Per Inch of Stroke:. Standard Air Three-Position Cushion 09 -D $7.70 Add $.40 per inch of stroke 09 -DP $2.20 Add $.40 per inch of stroke 09 -DX $23.20 Add $.40 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.33 Adder Per Inch of Stroke:.05 Double Acting Pivot Type Air Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-66- Piston Rod Clevis D-67 Pivot Bracket Base Weight:.33 Adder Per Inch of Stroke:.05 Double Acting Universal Mounting Pivot, or Double End Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-3498-A Pivot Bracket D-29 Mounting Bracket D-66- Piston Rod Clevis Base Weight:.33 Adder Per Inch of Stroke:.05 MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.35 For Technical Assistance:

36 -/6" Bore Air 09 -DXDE $30.95 Add $.85 per inch of stroke 09 -DXDEH $39.30 Add $2.70 per inch of stroke Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.48 Adder Per Inch of Stroke:.07 Double Acting Double End Hollow Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.47 Adder Per Inch of Stroke:.07 -/6" Bore Block Mounted Spring Force: 6 lbs. Retracted, 2 lbs. Extended BF-09 $25.75 Add $2.40 per inch of stroke Single Acting Front Block Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.43 Adder Per Inch of Stroke:. BF-09 -D $27.60 Add $.40 per inch of stroke Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.49 Adder Per Inch of Stroke:.05.36

37 -/6" Bore Air BF-09 -R $30.35 Add $2.40 per inch of stroke BF-09 -LS or LSC* $80.25 Add $2.40 per inch of stroke *Add $.85 for Conduit Outlet -/6" Bore Block Mounted (continued) Pull Type Front Block Mounting Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.36 Adder Per Inch of Stroke:.6 Built-in Midget 3-Way Solenoid Operated Valve Single Acting Spring Return Front Block Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. Base Weight:.3 Adder Per Inch of Stroke:. Standard Air Three-Position Cushion MRS Non-Rotating Air BR-09 $22.0 Add $2.40 per inch of stroke BR-09 -D $27.05 Add $.40 per inch of stroke BR-09 -R $26.70 Add $2.40 per inch of stroke Single Acting Rear Block Mounting for Vertical Positioning Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.36 Adder Per Inch of Stroke:.6 Double Acting Rear Block Mounting for Vertical Positioning Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" Base Weight:.39 Adder Per Inch of Stroke:.05 Pull Type Rear Block Mounting for Vertical Positioning Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.32 Adder Per Inch of Stroke:.6 PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.37 For Technical Assistance:

38 -/6" Bore Air -/6" Bore Trunnion Mounted Spring Force: 6 lbs. Retracted, 3 lbs. Extended BFT-09 $33.70 Add $2.40 per inch of stroke Single Acting Front Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB-2 Trunnion Brackets D-66- Rod Clevis Base Weight:.45 Adder Per Inch of Stroke:. BFT-09 -D $35.85 Add $.40 per inch of stroke BRT-09 $30.00 Add $2.40 per inch of stroke BRT-09 -D $34.75 Add $.40 per inch of stroke Double Acting Front Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-66- Rod Clevis Base Weight:.49 Adder Per Inch of Stroke:.05 Single Acting Rear Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB-2 Trunnion Brackets D-66- Rod Clevis Base Weight:.37 Adder Per Inch of Stroke:. Double Acting Rear Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-66- Rod Clevis Base Weight:.43 Adder Per Inch of Stroke:.05.38

39 -/6" Bore Air -/6" Bore Adjustable Stroke Standard Air 09 -A $26.70 Add $2.40 per inch of stroke 09 -RA $27.85 Add $2.40 per inch of stroke 09 -AP $26.20 Add $2.40 per inch of stroke Single Acting Spring Return Adjustable Stroke Double End Mounting Brass Piston Rod Bearing and Stroke Adjustment in ", 2", 3". " Stroke Adjusts 0" ", 2" Stroke " 2", and 3" Stroke 2" 3". Mounting brackets are included. Base Weight:.58 Adder Per Inch of Stroke:. Reverse Single Acting Pull Type Rod Normally Extended Spring Force: 6 lbs. Retracted, 3 lbs. Extended Nose Mounting Stroke Adjustment in ", 2", 3". " Stroke Adjusts 0" ", 2" Stroke " 2", and 3" Stroke 2" 3". D-29 Mounting Brackets Base Weight:.4 Adder Per Inch of Stroke:. Single Acting Pivot Type Rear Pivot Mounting Stroke Adjustment in ", 2", 3". " Stroke Adjusts 0" ", 2" Stroke " 2", and 3" Stroke 2" 3". D-66- Piston Rod Clevis D-67 Pivot Brackets Base Weight:.40 Adder Per Inch of Stroke:. Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air 09 -M $47.25 Add $2.40 per inch of stroke -/6" Bore Built-in Manual Valve Single Acting Built-in 3-Way Manual Valve Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.45 Adder Per Inch of Stroke:. Rod Lock 500 Hydraulic Hole Punch.39 For Technical Assistance:

40 -/6" Bore Air -/6" Bore Built-in Manual Valve (continued) 09 -NRM $49.60 Add $2.40 per inch of stroke D-29 $2.45 Single Acting Built-in 3-Way Manual Valve Non-rotating Hexagon Rod Spring Return 2", ", 2", 2", 2 2", 3", 4" D-29 Mounting Bracket Base Weight:.47 Adder Per Inch of Stroke:.2 -/6" Bore Accessories D-3498-A $3.30 D-67 $2.85 Mounting Bracket (for Single & Double Acting Models) TRB-2 $8.25 Pivot Bracket D -66- $3.30 Pivot Brackets D-9 $.40 Trunnion Brackets Piston Rod Clevis Mounting Nut Note: For stainless steel accessories see pages.99 and

41 -/4" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately.2 of Air Line Pressure Enclosed Spring Force: 7.5 lbs. Relaxed 5 lbs. Compressed Cushion Quiet Bumpers Standard 2 $2.35 Add $3.0 per inch of stroke 2 -NR $23.95 Add $3.0 per inch of stroke OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.3" to nose mount overall length PIVOT BUSHING (Y).250" ID EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DXDE hollow rod, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders Enter Stroke Length as 3rd Digit OPTIONS continued MAGNET (prefix M) Single and reverse acting add.25" to overall length, Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting Reverse acting Double acting DXDE HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting Double acting DXDE Reverse acting MOLYCOATED BODY Add per inch of stroke NON-LUBE SERVICE (E) Single acting Double acting DXDE STAINLESS STEEL ROD (prefix SR) Standard on DXDE, DXDEH and M option ROD WIPER (W) (not available in standard single acting) LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.39 Adder Per Inch of Stroke:.2 Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.4 Adder Per Inch of Stroke:.20 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic See page.8 for length calculation of fractional stroke for single acting cylinders.4 For Technical Assistance: Hole Punch

42 -/4" Bore Air 2 -NRP $29.05 Add $3.0 per inch of stroke 2 -P $26.30 Add $3.0 per inch of stroke 2 -R $27.85 Add $3.0 per inch of stroke 2 -RP $29.90 Add $3.0 per inch of stroke Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4" D-23- Piston Rod Clevis D-360 Pivot Brackets Base Weight:.4 Adder Per Inch of Stroke:.20 Single Acting Pivot Type Spring Return Rear Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4" D-23- Piston Rod Clevis D-360 Pivot Brackets Base Weight:.53 Adder Per Inch of Stroke:.2 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.50 Adder Per Inch of Stroke:.2 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-23- Piston Rod Clevis D-360 Pivot Bracket Base Weight:.57 Adder Per Inch of Stroke:.2.42

43 -/4" Bore Air 2 -LS or LSC* $74.65 Add $3.0 per inch of stroke *Add $.85 for Conduit Outlet Single Acting Built-in Midget 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-24 Mounting Bracket Base Weight:.30 Adder Per Inch of Stroke:.2 Standard Air Three-Position Cushion 2 -NRLS or NRLSC* $77.60 Add $3.0 per inch of stroke *Add $.85 for Conduit Outlet 2 -D $27.25 Add $.85 per inch of stroke 2 -DP $32.40 Add $.85 per inch of stroke Single Acting Non-rotating Hexagon Piston Rod Built-in Midget 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 50 PSI, 3 64" Orifice 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-24 Mounting Bracket Base Weight:.30 Adder Per Inch of Stroke:.2 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-24 Mounting Bracket Base Weight:.58 Adder Per Inch of Stroke:.08 Double Acting Pivot Type Air Return Rear Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-23- Piston Rod Clevis D-360 Pivot Brackets D-24 Mounting Bracket Base Weight:.7 Adder Per Inch of Stroke:.08 MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.43 For Technical Assistance:

44 -/4" Bore Air 2 -DXDE $46.0 Add $2.70 per inch of stroke Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-24 Mounting Bracket Base Weight:.98 Adder Per Inch of Stroke:.2 2 -DXDEH $5.05 Add $2.90 per inch of stroke D-24 $3.80 Double Acting Double End Hollow Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-24 Mounting Bracket Base Weight:.97 Adder Per Inch of Stroke:.2 -/4" Bore Accessories D-360 $6.0 D -23- $5.35 Mounting Bracket (for Single & Double Acting Models) D-3556 $.50 Pivot Brackets Piston Rod Clevis Mounting Nut.44

45 -/2" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Optional Bronze Rod Guide Bushing Standard Force Exerted Approximately.7 of Air Line Pressure Enclosed Spring Force: 7 lbs. Relaxed 4 lbs. Compressed Rod Wipers Available on D, DP, DX, DXDE, and DXDEH Models OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K)* *Front port rotated 90 on BF models. NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.9" to nose mount overall length and DNR; BF and BFT add.38" PIVOT BUSHING (Y).375" ID (use D-620- pivot bracket) SINGLE AND REVERSE ACTING BUMPERS (B) additional Add.25" to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length * Front port rotated at 90 on BF model. EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DXDE hollow rod, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders HEAVY SPRINGS (H) are standard on all single acting block front and block rear mount, and all reverse acting and stroke adjust models. For all other single acting Spring Force: 8.5 lbs. relaxed 7 lbs. compressed Enter Stroke Length as 3rd Digit 7 $23.85 Add $3.60 per inch of stroke OPTIONS continued MAGNET (prefix M) Single and reverse acting add.25" to overall length, Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting Reverse acting Double acting DXDE HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting Double acting DXDE Reverse acting ROD WIPER (W) (not available in standard single acting now available in block mount) Double acting, DXDE, MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting Double acting DXDE STAINLESS STEEL ROD (prefix SR) Standard on DX, DXDE, DXDEH, DNR, DXNR, All block mounts, and M option LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.44 Adder Per Inch of Stroke:.22 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 7 -NR $26.25 Add $3.60 per inch of stroke Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.45 Adder Per Inch of Stroke:.22 See page.8 for length calculation of fractional stroke for single acting cylinders.45 For Technical Assistance: Hydraulic Hole Punch

46 -/2" Bore Air 7 -NRP $30.30 Add $3.60 per inch of stroke 7 -P $28.0 Add $3.60 per inch of stroke 7 -R $29.60 Add $3.60 per inch of stroke 7 -RP $33.65 Add $3.60 per inch of stroke Single Acting Non-rotating Hexagon Rod Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-23- Piston Rod Clevis D-229 Pivot Brackets Base Weight:.46 Adder Per Inch of Stroke:.22 Single Acting Pivot Type Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-23- Piston Rod Clevis D-229 Pivot Brackets Base Weight:.45 Adder Per Inch of Stroke:.22 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Spring Force 8.5 lbs. Extended, 7 lbs. Retracted Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.44 Adder Per Inch of Stroke:.22 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Spring Force 8.5 lbs, Extended, 7 lbs. Retracted Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" D-23- Piston Rod Clevis D-229 Pivot Brackets Base Weight:.45 Adder Per Inch of Stroke:.22.46

47 -/2" Bore Air 7 -S or SC* $77.85 Add $3.60 per inch of stroke *Add $2.40 for Conduit Outlet Single Acting Built-in 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 00 PSI, 6" Orifice Standard 50 PSI, 3 64" Orifice Optional 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-24 Mounting Bracket Base Weight:.38 Adder Per Inch of Stroke:.22 Standard Air Three-Position Cushion 7 -NRS or NRSC* $80.60 Add $3.60 per inch of stroke *Add $2.40 for Conduit Outlet 7 -D $29.05 Add $2.20 per inch of stroke 7 -DP $33.25 Add $2.20 per inch of stroke Single Acting Non-rotating Piston Rod Built-in 3-Way Solenoid Operated Valve Spring Return Front Nose Mounting 00 PSI, 6" Orifice Standard 50 PSI, 3 64" Orifice Optional 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. D-24 Mounting Bracket Base Weight:.38 Adder Per Inch of Stroke:.22 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.69 Adder Per Inch of Stroke:.08 Double Acting Pivot Type Air Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-23- Piston Rod Clevis D-229 Pivot Brackets Base Weight:.73 Adder Per Inch of Stroke:.08 MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.47 For Technical Assistance:

48 -/2" Bore Air 7 -DX $35.40 Add $2.20 per inch of stroke 7 -DXDE $46.80 Add $3.50 per inch of stroke 7 -DXDEH $54.00 Add $3.70 per inch of stroke Double Acting Double End Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.82 Adder Per Inch of Stroke:.08 Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.7 Adder Per Inch of Stroke:.3 Double Acting Double End Hollow Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.6 Adder Per Inch of Stroke:.3 Rod Seal D-2500 $.70 -/2" Bore Double Acting, Non-Rotating Rod Rod Bearing D-250 $.35 Repair Parts DXNR Rod Guide D-7 $7.55 DNR Rod Guide 7/8-4 mounting threads D-2509 $ DNR $54.75 Add $2.60 per inch of stroke Double Acting Non-rotating Hexagon Rod Front Nose Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-2669 Mounting Bracket Base Weight:.77 Adder Per Inch of Stroke:.09.48

49 -/2" Bore Air 7 -DXNR $60.75 Add $2.60 per inch of stroke -/2" Bore Double Acting, Non-Rotating Rod (continued) Double Acting Non-rotating Hexagon Rod Double End Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-24 Mounting Bracket D-830-A Rod Clevis Base Weight:.87 Adder Per Inch of Stroke:.08 Standard Air Three-Position Cushion BF-7 -DNR $6.95 Add $2.60 per inch of stroke BFT-7 -DNR $69.80 Add $2.60 per inch of stroke Double Acting Non-rotating Hexagon Rod Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-830-A Rod Clevis Base Weight:.7 Adder Per Inch of Stroke:.09 Double Acting Non-rotating Hexagon Rod Front Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" TRB-2 Trunnion Brackets D-830-A Rod Clevis Base Weight:.78 Adder Per Inch of Stroke:.09 MRS Non-Rotating Air PC All Stainless Repairable 7 -A $45.60 Add $3.60 per inch of stroke -/2" Bore Adjustable Stroke Single Acting Spring Return Adjustable Stroke Double End Mounting Brass Piston Rod Bearing and Stroke Adjustment in " increments to 3". Mounting Brackets are included. " Stroke Adjusts 0" to ", 2" Stroke " to 2", 3" Stroke 2" to 3" Base Weight:.75 Adder Per Inch of Stroke:.25 Z Line Air Rod Lock 500 Hydraulic Hole Punch.49 For Technical Assistance:

50 -/2" Bore Air 7 -RA $46.45 Add $3.60 per inch of stroke -/2" Bore Adjustable Stroke (continued) Reverse Single Acting Pull Type Rod Normally Extended Nose Mounting Stroke Adjustment in " increments to 3". " Stroke Adjusts 0" to ", 2" Stroke " to 2", 3" Stroke 2" to 3" D-24 Mounting Bracket Base Weight:.50 Adder Per Inch of Stroke: AP $44.30 Add $3.60 per inch of stroke Single Acting Pivot Type Rear Pivot Mounting Stroke Adjustment in " increments to 3". " Stroke Adjusts 0" to ", 2" Stroke " to 2", 3" Stroke 2" to 3" D-23- Piston Rod Clevis D-229 Pivot Brackets Base Weight:.50 Adder Per Inch of Stroke: M $59.50 Add $3.60 per inch of stroke -/2" Bore Built-In Manual Valve Single Acting Built-in 3-Way Manual Valve Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.75 Adder Per Inch of Stroke: NRM $6.90 Add $3.60 per inch of stroke Single Acting Built-in 3-Way Manual Valve Non-rotating Hexagon Rod Spring Return 2", ", 2", 2", 2 2", 3", 4" D-24 Mounting Bracket Base Weight:.75 Adder Per Inch of Stroke:.22.50

51 -/2" Bore Air -/2" Bore Block Mounted Spring Force: 8.5 lbs. Retracted, 7 lbs. Extended BF-7 $40.40 Add $3.70 per inch of stroke BF-7 -D $45.45 Add $2.20 per inch of stroke BF-7 -R $45.50 Add $3.70 per inch of stroke BF-7 -S or SC* $94.05 Add $3.70 per inch of stroke *Add $2.40 for conduit outlet BR-7 $34.35 Add $3.70 per inch of stroke Single Acting Front Block Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.99 Adder Per Inch of Stroke:.22 Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.99 Adder Per Inch of Stroke:.08 Pull Type Front Block Mounting Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.96 Adder Per Inch of Stroke:.22 Built-in 3-Way Solenoid Operated Valve Single Acting Spring Return Front Block Mounting 00 PSI, 6" Orifice Standard 50 PSI, 3 64"Orifice Optional 2", ", 2", 2", 2 2", 3", 4" Standard Voltage 5/60 Optional Voltages: 24, 230 A.C. or 6, 2, 24 D.C. Base Weight:.90 Adder Per Inch of Stroke:.22 Single Acting Rear Block Mounting for Vertical Positioning Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.87 Adder Per Inch of Stroke:.08 Standard Air Three-Position Cushion MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.5 For Technical Assistance:

52 -/2" Bore Air -/2" Bore Block Mounted (continued) BR-7 -D $40.00 Add $2.20 per inch of stroke Double Acting Rear Block Mounting for Vertical Positioning Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.87 Adder Per Inch of Stroke:.08 BR-7 -R $40.60 Add $3.70 per inch of stroke Pull Type Rear Block Mounting for Vertical Positioning Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Base Weight:.90 Adder Per Inch of Stroke:.0 -/2" Bore Trunnion Mounted Spring Force: 8.5 lbs. Retracted, 7 lbs. Extended BFT-7 $48.60 Add $3.70 per inch of stroke Single Acting Front Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB-2 Trunnion Brackets D-23- Rod Clevis Base Weight:.20 Adder Per Inch of Stroke:.22 BFT-7 -D $54.05 Add $2.20 per inch of Stroke BRT-7 $42.0 Add $3.70 per inch of stroke Double Acting Front Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-23- Rod Clevis Base Weight:.06 Adder Per Inch of Stroke:.08 Single Acting Rear Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" TRB-2 Trunnion Brackets D-23- Rod Clevis Base Weight:.06 Adder Per Inch of Stroke:.22.52

53 -/2" Bore Air BRT-7 -D $48.35 Add $2.20 per inch of stroke -/2" Bore Trunnion Mounted (continued) Double Acting Rear Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-23- Rod Clevis Base Weight:.9 Adder Per Inch of Stroke:.08 Standard Air Three-Position Cushion D-24 $3.80 -/2" Bore Accessories D-229 $4.85 TRB-2 $8.25 MRS Non-Rotating Air Mounting Bracket Pivot Bracket Trunnion Brackets PC D-2669 $3.80 D -23- $5.35 D-830-A $5.95 All Stainless Repairable Z Line Air Mounting Bracket D-3556 $.50 Piston Rod Clevis D-2545 $.85 Rod Clevis Rod Lock 500 Hydraulic Mounting Nut Mounting Nut Note: For stainless steel accessories see page.99 and Mounting bracket not available in stainless steel. Hole Punch.53 For Technical Assistance:

54 -3/4" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 2.4 of Air Line Pressure Enclosed Spring Force: lbs. Relaxed 24 lbs. Compressed Cushion Quiet Bumpers Standard OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.56" to nose mount overall length. PIVOT BUSHING (Y).375" ID EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DXDE hollow rod, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders Enter Stroke Length as 3rd Digit OPTIONS continued MAGNET (prefix M) Single and reverse acting add.25" to overall length, Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting Reverse acting Double acting DXDE HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting Double acting DXDE Reverse acting MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting Double acting DXDE ROD WIPER (W) (not available in standard single acting) STAINLESS STEEL ROD (prefix SR) Standard on DXDE, DXDEH LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add 24 $37.5 Add $4.50 per inch of stroke Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" C-337 Mounting Bracket Base Weight:.85 Adder Per Inch of Stroke: NR $40.25 Add $4.50 per inch of stroke Single Acting Non-rotating Hexagon Rod Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" C-337 Mounting Bracket Base Weight:.86 Adder Per Inch of Stroke:.36 See page.8 for length calculation of fractional stroke for single acting cylinders.54

55 -3/4" Bore Air 24 -NRP $45.65 Add $4.50 per inch of stroke Single Acting Non-rotating Hexagon Rod Pivot Type Spring Return Rear Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4" D-23-3 Piston Rod Clevis D-620- Pivot Brackets C-337 Mounting Bracket Base Weight:.86 Adder Per Inch of Stroke:.36 Standard Air Three-Position Cushion 24 -P $42.55 Add $4.50 per inch of stroke 24 -R $44.90 Add $4.50 per inch of stroke 24 -D $45.05 Add $2.20 per inch of stroke Single Acting Pivot Type Spring Return Rear Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4" D-23-3 Piston Rod Clevis D-620- Pivot Brackets C-337 Mounting Bracket Base Weight:.86 Adder Per Inch of Stroke:.36 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" C-337 Mounting Bracket Base Weight:.7 Adder Per Inch of Stroke:.3 Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" C-337 Mounting Bracket Base Weight:.29 Adder Per Inch of Stroke:. MRS Non-Rotating Air PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.55 For Technical Assistance:

56 -3/4" Bore Air 24 -DP $50.70 Add $2.20 per inch of stroke 24 -DXDE $65.70 Add $3.25 per inch of stroke 24 -DXDEH $79.20 Add $3.50 per inch of stroke Double Acting Pivot Type Air Return Rear Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-23-3 Piston Rod Clevis D-620- Pivot Brackets C-337 Mounting Bracket Base Weight:.64 Adder Per Inch of Stroke:. Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" C-337 Mounting Bracket Base Weight:.87 Adder Per Inch of Stroke:.8 Double Acting Double End Hollow Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" C-337 Mounting Bracket Base Weight:.80 Adder Per Inch of Stroke:.6.56

57 -3/4" Bore Air C-337 $6.05-3/4" Bore Accessories D $.80 D $5.35 Standard Air Three-Position Cushion Mounting Bracket D-33 $2.05 Pivot Brackets Piston Rod Clevis MRS Non-Rotating Air Mounting Nut PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.57 For Technical Assistance:

58 Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 3. of Air Line Pressure Enclosed Spring Force: 5 lbs. Relaxed 30 lbs. Compressed Mounting Nuts Not Included 3 $48.65 Add $5.00 per inch of stroke OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.38" to nose mount overall length. SINGLE AND REVERSE ACTING BUMPERS (B) additional Add.25" to overall length DOUBLE ACTING BUMPERS (B) additional Add.250 to overall length EXTRA EXTENSION (EE) Single, reverse and double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end DOUBLE ACTING FAILSAFE (JS = Spring Return, JR = Spring Extend) Add to base price + to stroke adder See page.65 for overall length adders 2" Bore Air OPTIONS continued MAGNET (prefix M) Single and reverse acting add.25" to overall length, Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Single acting Reverse acting Double acting DXDE HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Single acting Double acting DXDE Reverse acting MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Single acting Double acting DXDE ROD WIPER (W) (not available in standard single acting) STAINLESS STEEL ROD (prefix SR) Standard on DXP, DXDE, XP, M option LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Enter Stroke Length as 3rd Digit Single Acting Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-65 Mounting Bracket D-508 Mounting Nut Base Weight:.04 Adder Per Inch of Stroke: XP $59.35 Add $5.20 per inch of stroke Single Acting Universal Mounting Type Nose, Pivot or Double End Spring Return Bronze Rod Bushing and Bronze Pivot Bushing 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-23-3 Piston Rod Clevis D-65 Mounting Bracket D-620 Pivot Brackets D-508 Mounting Nut Base Weight:.26 Adder Per Inch of Stroke:.43.58

59 2" Bore Air 3 -R $56.30 Add $5.00 per inch of stroke 3 -RP $6.60 Add $5.00 per inch of stroke Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-65 Mounting Bracket D-508 Mounting Nut Base Weight:.24 Adder Per Inch of Stroke:.43 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-23-3 Piston Rod Clevis D-620 Pivot Bracket D-508 Mounting Nut D-65 Mounting Bracket Base Weight:.46 Adder Per Inch of Stroke:.43 Standard Air Three-Position Cushion MRS Non-Rotating Air 3 -D $46.85 Add $2.40 per inch of stroke 3 -DXP $56.25 Add $2.50 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-508 Mounting Nut D-65 Mounting Bracket Base Weight:.40 Adder Per Inch of Stroke:.5 Double Acting Universal Mounting Type Pivot or Double End Air Return Bronze Pivot Bushing 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2", 3", 4", 5", 6", 7", 8", 9", 20", 2", 22", 23", 24" Maximum Stroke 32" D-23-3 Piston Rod Clevis D-65 Mounting Bracket D-620 Pivot Brackets D-508 Mounting Nut Base Weight:.62 Adder Per Inch of Stroke:.5 PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.59 For Technical Assistance:

60 2" Bore Air 3 -DXDE $69.40 Add $3.60 per inch of stroke D-65 $8.40 Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-65 Mounting Bracket D-508 Mounting Nut Base Weight:.97 Adder Per Inch of Stroke:.24 2" Bore Accessories D-620 $.80 D $5.35 Mounting Bracket D-508 $3.05 Pivot Brackets Piston Rod Clevis Mounting Nut Note: For stainless steel accessories see page.99 and

61 2-/2" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 5.0 of Air Line Pressure Double Acting Only Mounting Nuts Not Included OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.38" to nose mount overall length. DOUBLE ACTING BUMPERS (B) additional Add.250 to overall length EXTRA EXTENSION (EE) Double acting, per inch of extension DXDE, per inch of extension; extension added to each end Enter Stroke Length as 3rd Digit OPTIONS continued MAGNET (prefix M) Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Double acting DXDE HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Double acting DXDE MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Double acting DXDE ROD WIPER (W) (not available in standard single acting) STAINLESS STEEL ROD (prefix SR) Standard on M option, DXP, DXDE LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Standard Air Three-Position Cushion MRS Non-Rotating Air 50 -D $67.5 Add $2.60 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-65- Mounting Bracket D-2540 Mounting Nut Base Weight:.98 Adder Per Inch of Stroke:.7 PC All Stainless Repairable 50 -DXP $78.90 Add $2.70 per inch of stroke Double Acting Universal Mounting Type Pivot or Double End Air Return Bronze Rod Bushing and Bronze Pivot Bushing 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2", 3", 4", 5", 6", 7", 8", 9", 20", 2", 22", 23", 24" Maximum Stroke 32" D-23-3 Piston Rod Clevis D-65- Mounting Bracket D-620 Pivot Brackets D-2540 Mounting Nut Base Weight: 2.27 Adder Per Inch of Stroke:.7 Z Line Air Rod Lock 500 Hydraulic Hole Punch.6 For Technical Assistance:

62 2-/2" Bore Air 50 -DXDE $92.00 Add $4.20 per inch of stroke D -65- $8.90 Double Acting Double End Rod Air Return Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-65- Mounting Bracket D-2540 Mounting Nut Base Weight: 2.32 Adder Per Inch of Stroke:.34 2-/2" Bore Accessories D-620 $.80 D $5.35 Mounting Bracket D-2540 $3.90 Pivot Brackets Piston Rod Clevis Mounting Nut.62

63 3" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 7.0 of Air Line Pressure Double Acting Only Mounting Nuts Not Included OPTIONS: NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) NO THREAD (NT) SIDE PORTED REAR HEAD (Q) Add.44" to nose mount overall length. DOUBLE ACTING BUMPERS (B) additional Add.250 to the length EXTRA EXTENSION (EE) Double acting, add per inch of extension DXDE, add per inch of extension; extension added to each end Enter Stroke Length as 3rd Digit OPTIONS continued MAGNET (prefix M) Stainless steel rod becomes standard with this option Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. LOW TEMPERATURE (N) Temperature Range: -40 to 200ºF Double acting DXDE HIGH TEMPERATURE U CUPS (V) Temperature Range: 0 to 400ºF (-8 to 205ºC) Double acting DXDE MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) Double acting DXDE ROD WIPER (W) (not available in standard single acting) STAINLESS STEEL ROD (prefix SR) Standard on DXP, DXDE, and M option LOW PRESSURE HYDRAULIC (HL) 250 psi maximum Double acting models only Option specified as a prefix Add Standard Air Three-Position Cushion MRS Non-Rotating 70 -D 70 -DXP Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Carbon Steel Piston Rod Standard D-927 Mounting Bracket D-5379 Mounting Nut Base Weight: 3.34 Adder Per Inch of Stroke:.26 Double Acting Universal Mount Pivot or Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2", 3", 4", 5", 6", 7", 8", 9", 20", 2", 22", 23", 24" Maximum Stroke 32" D-352-A Pivot Bracket D-927 Mounting Bracket D-834-A Rod Clevis D-5379 Mounting Nut Base Weight: 3.87 Adder Per Inch of Stroke:.26 PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.63 For Technical Assistance:

64 3" Bore Air 70 -DXDE $9.00 Add $4.40 per inch of stroke Double Acting Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-927 Mounting Bracket D-5379 Mounting Nut Base Weight: 4.05 Adder Per Inch of Stroke:.52 D-352-A $0.95 3" Bore Accessories D-834-A $.25 D-927 $8.25 Pivot Bracket D-5379 $3.90 Rod Clevis Mounting Bracket Mounting Nut.64

65 Options Spring Extend Length Adder Bore Type Overall Length Adder for -JR Option 0070-D per 0.50" of stroke 5/6" 0070-DXP per 0.50" of stroke BF-0070-D per 0.50" of stroke 00-D, BF-00-D & BFT-00-D per 0.50" of stroke 7/6" 00-DP & 00-DX per 0.50" of stroke BR-00-D & BRT-00-D per 0.50" of stroke 9/6" 020-D per " of stroke 020-DXP per " of stroke 040-D per " of stroke 3/4" 040-DP, 040-DXP, BR-040-D & BRT-040-D per " of stroke BF-040-D & BFT-040-D per " of stroke 7/8" 060-D 3.9 (3.60 High Temp.) per " of stroke 060-DXP 4.0 (4.50 High Temp.) per " of stroke 090-D 3.38 (3.5) per " of stroke -/6" 090-DP, 090-DX per " of stroke BF-090-D, BFT-090-D per " of stroke BR-090-D, BRT-090-D per " of stroke -/4" 20-D 4.38 (4.25) per " of stroke 20-DP 5.50 (5.44) per " of stroke 70-D per " of stroke 70-DP per " of stroke -/2" 70-DX per " of stroke BF-70-D, BFT-70-D per " of stroke BR-70-D, BRT-70-D per " of stroke -3/4" 240-D 5.2 (4.99 High Temp.) = 3" per " of stroke 240-DP 6.68 (6.56 High Temp.) = 3" per " of stroke Spring Return Length Adder Bore Type Overall Length Adder for -JS Option 0070-D per 0.50" of stroke 5/6" 0070-DXP per 0.50" of stroke BF-0070-D per 0.50" of stroke 00-D, BF-00-D & BFT-00-D per 0.50" of stroke 7/6" 00-DP & 00-DX per 0.50" of stroke BR-00-D & BRT-00-D per 0.50" of stroke 00-DXDE per 0.50" of stroke 020-D per " of stroke 9/6" 020-DXP per " of stroke 020-DXDE per " of stroke 040-D per " of stroke 3/4" 040-DP, 040-DXP, BR-040-D & BRT-040-D per " of stroke BF-040-D & BFT-040-D per " of stroke 040-DXDE per " of stroke 060-D 3.9 (3.60 High Temp.) +.56 per " of stroke 7/8" 060-DXP 4.0 (4.50 High Temp.) +.56 per " of stroke 060-DXDE 4.6 (5.03 High Temp.) per " of stroke 090-D 3.38 (3.50) +.56 per " of stroke 090-DP, 090-DX per " of stroke -/6" BF-090-D, BFT-090-D per " of stroke BR-090-D, BRT-090-D per " of stroke 090-DXDE per " of stroke 20-D 4.38 (4.25 High Temp.) +.8 per " of stroke -/4" 20-DP 5.50 (5.44 High Temp.) +.8 per " of stroke 20-DXDE 5.94 (5.8 High Temp.) per " of stroke 70-D per " of stroke 70-DP per " of stroke -/2" 70-DX per " of stroke BF-70-D, BFT-70-D per " of stroke BR-70-D, BRT-70-D per " of stroke 70-DXDE per " of stroke 240-D 5.2 (4.99 High Temp.) = 2" per " of stroke -3/4" 240-DP 6.68 (6.56 High Temp.) = 2" per " of stroke 240-DXDE 7.25 (6.86 High Temp.) = 3" per " of stroke Spring Return Length Adder for 2" Bore Bore Stroke Type " 2" 3" 4" 2" 30-D, 30-DP stroke stroke stroke stroke 30-DXP stroke stroke stroke stroke 30-DXDE x stroke x stroke x stroke x stroke Spring Extend Length Adder for 2" Bore Bore Stroke Type " 2" 3" 4" 2" 30-D, 30-DP x stroke x stroke x stroke x stroke 30-DXP x stroke x stroke x stroke x stroke.65 For Technical Assistance: Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch

66 Three-Position Original Line Bimba s Three-Position Original Line stainless steel body cylinder provides three positions with a single cylinder. Bimba offers the performance and quality of the unitized Original Line cylinder design along with it s product breadth now in three positive stroke positions. The model number for all Three-Position Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer to the charts below for an example of model number Product Type Blank Three-position Original Line M Magnet option for cylinders* NR Non-rotating rod option *Magnet located on stroke B piston only. Bore Sizes 02 9/6" 04 3/4" 09 -/6" 7 -/2" 3 2" How to Order M-043/4.5-DW. This is a 3/4" bore, with a 3" stroke for position A, plus an additional 4-/2" stroke for position B, double acting cylinder with a rod wiper. Stroke A Stroke B Standard Stroke Lengths and Stroke Maximums 0.5 = /2" 0.5 = /2" Nose Mount = " " = " " increments to 2".5 = 2-/2" 2.5 = 2-/2" 2 x Stroke A + Stroke B Maximum = 2" 3.75 = 3-3/4" 3.75 = 3-3/4" Universal Mount etc. etc. " increments to 24" 2 x Stroke A + Stroke B Maximum = 32" M / D W Mounting Options D Double acting, nose mount DXP Double acting, universal mount Options (Enter in alphabetical order, except EE which is last) B Bumpers E Non-lube seals and lubrication F Molycoated body G Magnalube G K Ports rotated 90 degrees N Low temperature seals & lubrication NT Non-threaded rod Q Side ported rear head (see standard Original Line information for applicable length adders by bore size) T Switch Track (T2, T3 or T4), see Related Products, page 8.2 V High temperature seals & lubrication W Rod wiper EEX.XX Extra rod extension Note: Consult page.4 for option combination compatibility. Specifications Expected life: 400 miles when lubricated Total stroke tolerance: 9/6" -/2" +.075/ ": +.095/-.060 Operating Medium: Air only Maximum Operating Pressure: 250 psi Temperature Range: -20 F to 200 F Standard Lubrication: HT-99 Endcaps, center section, and piston material: Aluminum Cylinder body: 304 stainless steel Piston and rod seals: Buna N U cups Rod and pivot bushings: Sintered bronze Piston rod: 303 stainless steel Magnalube is a registered trademark of Carleton Stuart Corporation.66

67 Three-Position Original Line List Prices Mounting Total Mounting- Bore D List -DXP List combined stroke Price Price adder, per inch** 02-9/6" $29.95 $33.0 $ /4" /6" $37.70 $42.90 $ /2" 3-2" $70.80 $79.75 $2.50 **Total combined stroke = (2 X stroke A) + Stroke B Options M B E F N V W EE NR Bore (Prefix) Bumpers Non-lube Molycoated Low High Rod Extra Rod Prefix Magnetic Seals and Body Temperature Temperature Wiper Extension Non- Position Lubrication per inch Seals Seals and per inch rotating Sensing lubrication rod 9/6" (02) $8.70 $7.55 $5.20 $2.40 $2.20 $9.65 $2.60 $0.75 $5.55 3/4" (04) -/6" (09) $0.85 $7.55 $7.40 $2.40 $3.25 $23.65 $2.60 $0.75 $ /2" (7) 2" (3) $5.20 $.75 $27.35 $2.40 $5.45 $33.40 $5.20 $.20 $25.00 No Charge Options: G, K, NT Dimensions Standard Air Three-Position Cushion MRS Non-Rotating D Mounting Style (in.) DXP Mounting Style (in.) PC All Stainless Repairable D Model Bumper Option Bore Aa Ba C D E F G H I J K L M N O Aa Ba 9/6" (02) # N/A /6-20 N/A # / /4" (04) /8 NPT N/A /8-8 N/A / / /6" (09) /8 NPT / / / /2" (7) /8 NPT / / / " (3) /4 NPT / / / Z Line Air Rod Lock DXP Model Bumper Option Bore Aa Ba C D E F G H I J K L M N O P Q R Aa Ba 9/6" (02) # N/A /6-20 N/A # / /4" (04) /8 NPT N/A /8-8 N/A / / /6" (09) /8 NPT / / / /2" (7) /8 NPT / / / " (3) /4 NPT / / / Hydraulic Hole Punch.67 For Technical Assistance:

68 Air with Adjustable Cushions* Readily Accessible Cushion Needle For Easy Adjustment Double Acting Models Rated 250 PSI 304 Stainless Steel Body Mirror Finish I.D. High Strength Aluminum Alloy Porting Ends Ground and Roller Burnished 303 Stainless Steel Piston Rod Standard Buna N U Cup Seals Low Breakaway Friction Less Than 5 PSI Special Stroke Lengths Available on Request OPTIONS FOR EACH BORE SIZE: NO CHARGE: MAGNALUBE G (G) NO THREAD (NT) (Available on 3 4", 6" and 2" bores) EXTRA EXTENSION (EE) Double acting, per inch of extension: 3 4" Bore, 6" Bore, 2" Bore, 2" Bore, 2 2" Bore, 3" Bore, HIGH TEMPERATURE SEALS (V) Double Acting DXDE 04 Bore 09 Bore 7 Bore 3 Bore are supplied with adjustable cushions on both ends. To order cushion on one end only, specify CF (front head cushion only), or CR (rear head cushion only), or CS (one end only) and deduct from base price as shown. (ex: 3 4" bore, cushion on front head only CF-04 -D; 3 4" bore, cushion on rear head only CR-04 -D; 3 4" DXDE model, cushion on one side only CS-04-D). OPTIONS FOR EACH BORE SIZE: continued 50 Bore 70 Bore EXTRA EXTENSION (EE) DXDE, per inch of extension: (added to each end) 3 4" Bore, 6" Bore, 2" Bore, 2" Bore, 2 2" Bore, 3" Bore, PORTS ROTATED (K)* (Rotates ports and cushion screw location 90 clockwise) MAGNETIC PISTON (prefix M) 3 4" Bore, 6" Bore, 2" Bore, 2" Bore, 2 2" Bore, 3" Bore, MINI SWITCH TRACKS on all bore sizes Must specify track(s) for use with Bimba s miniature position sensing (T2, T3, T4 Add per track. See Related Products, page 8.2 for details. ROD WIPER (W) (Available on 3 4", 6" and 2" bores) Double acting, DXDE, PIVOT BUSHING (Y)* MOLYCOATED BODY (F) Add per inch of stroke NON-LUBE SERVICE (E) See corresponding standard Original Line bore size catalog page for pricing. *Consult local distributor for pricing. Enter Stroke Length as 3rd Digit C-04 -D $29.45 Add $.40 per inch of stroke Cushion one end only, deduct $6.00 from base price. CF-04 -D (Front only) CR-04 -D (Rear only) 3/4" Bore Air with Adjustable Cushions Double Acting Air Return Front Nose Mounting ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.24 Adder Per Inch of Stroke:.03 *U.S. Patent nos. 4,794,68 and 4,862,786.68

69 Air with Adjustable Cushions 3/4" Bore Air with Adjustable Cushions (continued) C-04 -DXP $35.25 Add $.40 per inch of stroke Cushion one end only, deduct $6.00 from base price. CF-04 -DXP (Front only) CR-04 -DXP (Rear only) C-04 -DXDE $43.20 Add $.85 per inch of stroke Cushion one end only, deduct $6.00 from base price. CS-04 -DXDE (One end only) C-09 -D $33.65 Add $.40 per inch of stroke Cushion one end only, deduct $6.55 from base price. CF-09 -D (Front only) CR-09 -D (Rear only) Double Acting Double End or Rear Pivot Mounting Air Return ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-29 Mounting Bracket D-3498-A Pivot Bracket D-66-3 Piston Rod Clevis Base Weight:.29 Adder Per Inch of Stroke:.03 Double Acting Double End Rod Air Return Double End Mounting ", 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.30 Adder Per Inch of Stroke:.06 -/6" Bore Air with Adjustable Cushions Double Acting Air Return Front Nose Mounting ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.38 Adder Per Inch of Stroke:.04 Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.69 For Technical Assistance:

70 Air with Adjustable Cushions -/6" Bore Air with Adjustable Cushions (continued) C-09 -DXP $39.70 Add $.40 per inch of stroke Cushion one end only, deduct $6.55 from base price. CF-09 -DXP (Front only) CR-09 -DXP (Rear only) Double Acting Universal Mounting Pivot, or Double End Mounting Air Return ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-3498-A Pivot Bracket D-29 Mounting Bracket D-66- Piston Rod Clevis Base Weight:.44 Adder Per Inch of Stroke:.04 C-09 -DXDE $47.70 Add $.85 per inch of stroke Cushion one end only, deduct $6.55 from base price. CS-09 -DXDE (One end only) Double Acting Double End Rod Air Return Double End Mounting ", 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-29 Mounting Bracket Base Weight:.46 Adder Per Inch of Stroke:.08 C-7 -D $50.0 Add $2.20 per inch of stroke Cushion one end only, deduct $7.65 from base price. CF-7 -D (Front only) CR-7 -D (Rear only) -/2" Bore Air with Adjustable Cushions Double Acting Air Return Front Nose Mounting ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.76 Adder Per Inch of Stroke:.09.70

71 Air with Adjustable Cushions -/2" Bore Air with Adjustable Cushions (continued) C-7 -DP $54.80 Add $2.20 per inch of stroke Cushion one end only, deduct $7.65 from base price. CF-7 -DP (Front only) CR-7 -DP (Rear only) C-7 -DX $57.80 Add $2.20 per inch of stroke Cushion one end only, deduct $7.65 from base price. CF-7 -DX (Front only) CR-7 -DX (Rear only) Double Acting Pivot Type Air Return Rear Pivot Mounting ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-23- Piston Rod Clevis D-229 Pivot Brackets Base Weight:.77 Adder Per Inch of Stroke:.09 Double Acting Double End Mounting Air Return ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.84 Adder Per Inch of Stroke:.09 Standard Air Three-Position Cushion MRS Non-Rotating PC C-7 -DXDE $73.55 Add $3.50 per inch of stroke Cushion one end only, deduct $7.65 from base price. CS-7 -DXDE (One end only) Double Acting Double End Rod Air Return Double End Mounting ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" Optional Rod Wiper D-24 Mounting Bracket Base Weight:.90 Adder Per Inch of Stroke:.8 All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.7 For Technical Assistance:

72 Air with Adjustable Cushions 2" Bore Air with Adjustable Cushions C-3 -D $84.70 Add $2.50 per inch of stroke Cushion one end only, deduct $2.50 from base price. CF-3 -D (Front only) CR-3 -D (Rear only) Double Acting Air Return Front Nose Mounting ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-65 Mounting Bracket D-508 Mounting Nut Base Weight:.64 Adder Per Inch of Stroke: C L ADJ. SCREW (FRONT) C L ADJ. SCREW (REAR) /2-20 UNF-2A (É.625 ROD) /4-2 UNF-2A.50 WRENCH FLATS É.372/.375 PILOT STROKE 2X /4 NPT PORT STAINLESS.47 C-3 -DXP $03.05 Add $2.50 per inch of stroke Cushion one end only, deduct $2.50 from base price. CF-3 -DXP (Front only) CR-3 -DXP (Rear only) C-3 -DXDE $28.35 Add $3.60 per inch of stroke Cushion one end only, deduct $2.50 from base price. CS-3 -DXDE (One end only) Double Acting Double End or Rear Pivot Mounting Air Return ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-65 Mounting Bracket D-620 Pivot Bracket D-23-3 Piston Rod Clevis D-508 Mounting Nut Base Weight:.68 Adder Per Inch of Stroke:.5 Double Acting Double End Rod Air Return Double End Mounting ", 2", 3", 4", 5", 6" Maximum Stroke 2" D-65 Mounting Bracket D-508 Mounting Nut Base Weight:.99 Adder Per Inch of Stroke:.24 *U.S. Patent nos. 4,794,68 and 4,862,786.72

73 Air with Adjustable Cushions C-50 -D $04.80 Add $2.70 per inch of stroke Cushion one end only, deduct $5.60 from base price. CF-50 -D (Front only) CR-50 -D (Rear only) C-50 -DXP $9.5 Add $2.70 per inch of stroke Cushion one end only, deduct $5.60 from base price. CF-50 -DXP (Front only) CR-50 -DXP (Rear only) 2-/2" Bore Air with Adjustable Cushions Double Acting Air Return Front Nose Mounting ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-65- Mounting Bracket D-2540 Mounting Nut Base Weight: 2.2 Adder Per Inch of Stroke:.7 Double Acting Universal Mounting Pivot, or Double End Mounting Air Return ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-65- Mounting Bracket D-620 Pivot Bracket D-23-3 Piston Rod Clevis D-2540 Mounting Nut Base Weight: 2.33 Adder Per Inch of Stroke:.7 Standard Air Three-Position Cushion MRS Non-Rotating PC C-50 -DXDE $57.65 Add $4.20 per inch of stroke Cushion one end only, deduct $5.60 from base price. CS-50 -DXDE (One end only) Double Acting Double End Rod Air Return Double End Mounting ", 2", 3", 4", 5", 6" Maximum Stroke 2" D-65- Mounting Bracket D-2540 Mounting Nut Base Weight: 2.38 Adder Per Inch of Stroke:.34 All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.73 For Technical Assistance:

74 C-70 -D $37.65 Add $3.30 per inch of stroke Cushion one end only, deduct $7.70 from base price. CF-70 -D (Front only) CR-70 -D (Rear only) Air with Adjustable Cushions 3" Bore Air with Adjustable Cushions Double Acting Air Return Front Nose Mounting ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-927 Mounting Bracket D-5379 Mounting Nut Base Weight: 3.8 Adder Per Inch of Stroke:.26 C-70 -DXP $54.75 Add $3.30 per inch of stroke Cushion one end only, deduct $7.70 from base price. CF-70 -DXP (Front only) CR-70 -DXP (Rear only) C-70 -DXDE $7.70 Add $4.40 per inch of stroke Cushion one end only, deduct $7.70 from base price. CS-70 -DXDE (One end only) Double Acting Pivot Type Air Return Rear Pivot Mounting ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-834-A Piston Rod Clevis D-352-A Pivot Brackets D-5379 Mounting Nut Base Weight: 3.97 Adder Per Inch of Stroke:.26 Double Acting Double End Rod Air Return Double End Mounting ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-927 Mounting Bracket D-5379 Mounting Nut Base Weight: 4.5 Adder Per Inch of Stroke:.52 Accessories For 3 4" bore, see page.28. For 6" bore, see page.40. For 2" bore, see page.53. For 2" bore, see page.60. For 2 2" bore, see page.62. For 3" bore, see page

75 Air with Adjustable Cushions Cushion Energy Absorption with air cushions provide a possible solution to destructive energies. The air cushion traps a small amount of exhaust air at the end of stroke, providing an air pocket that decelerates the load. This reduces the potentially destructive energy being transmitted to the cylinder and other components. The following is a brief explanation on how to determine the energy level of your application and decide if an air cushion can provide adequate energy absorption. For a more detailed description, consult the factory at BIMBA. Step. Determine the load to be stopped by the cylinder. Standard Air Three-Position Cushion Step 2. Determine the velocity at which the load impacts the cylinder endcap. Step 3. Example: Calculate the energy the cylinder generates. Use the following equation: w energy (e) = ( x v 2 ) + (p x k) 64 w = weight of the load (lbs.) V = velocity of the cylinder as the piston impacts the endcap (feet per second) p = driving pressure (psi) k = bore constant C-36-D at 80 psi with total load of 8 lbs. driving pressure (p) = 80 psi total load (w) = 8 lbs. bore constant (k) =.24 maximum velocity (v) = 6 fps = (8/64) x (6 2 ) + (80 x.24) = 23.7 ft. lbs. MRS Non-Rotating PC All Stainless Repairable Maximum Energy Calculation Data Bore Max Energy k (ft-lbs) Cushion Lengths 0.75" 0.75" 0.75" 0.90" 0.90" 0.99" Z Line Air Rod Lock 500 Hydraulic Hole Punch.75 For Technical Assistance:

76 MRS Magnetic Reed Switch Air Specifically designed to operate Bimba position sensing switches to actuate programmable controllers, relays, solenoids, timers, or any other electrically operated equipment. MRS cylinders have an additional groove in the piston to accommodate a magnet. They differ from the Moption because they combine features of the Z line with Original Line construction; check dimensional drawings for each size for more specific information. Type 303 stainless steel rods are standard. See Related Products, page 8.3 for information on Bimba position sensing switches. Enter Stroke Length as 3rd Digit MRS-02 -D $23.55 Add $.40 per inch of stroke OPTIONS: NO CHARGE: MAGNALUBE G (G) NO THREAD (NT) SWITCH TRACK for Standard Reed Switches Must specify Z for one track, ZTT for 2 tracks add per track. See Related Products, page 8.2 for details. 9/6" Bore MRS Air Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-770 Mounting Bracket Base Weight:.0 Adder Per Inch of Stroke:.0 OPTIONS continued DOUBLE ACTING BUMPERS (B) 9 6", add and.25" to length 3 4" and 6" add and.250" to length 4" and 2" add and.250" to length 3 4", 2" and 2 2" add and.250" to length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Double acting, per inch of extension: 9 6", 3 4" and 6" Bore, 4" Bore, 2" and 3 4" Bore, 2" Bore, 2 2" Bore, DXDE, per inch of extension: (added to both ends) 9 6", 3 4" and 6" Bore, 4" Bore, 2" and 3 4" Bore, 2" Bore, 2 2" Bore, PORTS ROTATED 90 (K)* SIDE PORTED REAR HEAD (Q)* NON-LUBE SERVICE (E) FLUOROELASTOMER/HIGH TEMPERATURE SEAL (V) See corresponding standard Original Line bore size catalog page for pricing of options E and V. *Consult local distributor for pricing. SWITCH TRACK for Miniature Swtiches (T2, T3, T4) Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. MRS-02 -DXP $26.75 Add $.40 per inch of stroke Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-232-A Pivot Bracket D-770 Mounting Bracket D-850 Rod Clevis Base Weight:.0 Adder Per Inch of Stroke:.0.76

77 MRS Magnetic Reed Switch Air MRS-02 DXDE $33.30 Add $.85 per inch of stroke MRS-04 -D $24.55 Add $.40 per inch of stroke MRS-04 -DXP $27.30 Add $.40 per inch of stroke MRS-04 DXDE $36.40 Add $.85 per inch of stroke 9/6" Bore MRS Air (continued) Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-770 Mounting Bracket Base Weight:.4 Adder Per Inch of Stroke:.02 3/4" Bore MRS Air Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-29 Mounting Bracket Base Weight:.24 Adder Per Inch of Stroke:.04 Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-03-A Pivot Bracket D-29 Mounting Bracket D-039-A Rod Clevis Base Weight:.30 Adder Per Inch of Stroke:.06 Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-29 Mounting Bracket Base Weight:.4 Adder Per Inch of Stroke:.06 Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.77 For Technical Assistance:

78 MRS Magnetic Reed Switch Air MRS-09 -D $29.55 Add $.40 per inch of stroke -/6" Bore MRS Air Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-835 Mounting Bracket Base Weight:.37 Adder Per Inch of Stroke:.05 MRS-09 -DXP $32.70 Add $.40 per inch of stroke MRS-09 DXDE $39.05 Add $.85 per inch of stroke Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-832-A Pivot Bracket D-835 Mounting Bracket D-8309-A Rod Clevis Base Weight:.42 Adder Per Inch of Stroke:.05 Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-835 Mounting Bracket Base Weight:.60 Adder Per Inch of Stroke:.08 -/4" Bore MRS Air MRS-2 -D $36.80 Add $.85 per inch of stroke Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-836 Mounting Bracket Base Weight:.5 Adder Per Inch of Stroke:.07.78

79 MRS Magnetic Reed Switch Air -/4" Bore MRS Air (continued) Standard Air MRS-2 -DXP $40.90 Add $.85 per inch of stroke Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-8322-A Pivot Bracket D-836 Mounting Bracket D-830-A Rod Clevis Base Weight:.6 Adder Per Inch of Stroke:.05 Three-Position Cushion MRS-2 DXDE $5.75 Add $2.70 per inch of stroke Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-836 Mounting Bracket Base Weight:.70 Adder Per Inch of Stroke:.4 -/2" Bore MRS Air MRS-7 -D $43.85 Add $2.20 per inch of stroke MRS-7 -DXP $47.85 Add $2.20 per inch of stroke Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-837 Mounting Bracket Base Weight:.74 Adder Per Inch of Stroke:.0 Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-8323-A Pivot Bracket D-837 Mounting Bracket D-83-A Rod Clevis Base Weight:.87 Adder Per Inch of Stroke:.0 MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.79 For Technical Assistance:

80 MRS Magnetic Reed Switch Air MRS-7 -DXDE $55.5 Add $3.50 per inch of stroke -/2" Bore MRS Air (continued) Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-837 Mounting Bracket Base Weight:.94 Adder Per Inch of Stroke:.20-3/4" Bore MRS Air MRS-24 -D $50.50 Add $2.20 per inch of stroke Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-838 Mounting Bracket Base Weight:.4 Adder Per Inch of Stroke:.3 MRS-24 -DXP $55.55 Add $2.20 per inch of stroke MRS-24 -DXDE $69.50 Add $3.50 per inch of stroke Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-8324-A Pivot Bracket D-838 Mounting Bracket D-832-A Rod Clevis Base Weight:.30 Adder Per Inch of Stroke:.3 Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-838 Mounting Bracket Base Weight:.40 Adder Per Inch of Stroke:.26.80

81 MRS Magnetic Reed Switch Air MRS-3 -D $57.05 Add $2.50 per inch of stroke MRS-3 -DXP $62.65 Add $2.50 per inch of stroke MRS-3 DXDE $74.60 Add $3.60 per inch of stroke 2" Bore MRS Air Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-839 Mounting Bracket Base Weight:.55 Adder Per Inch of Stroke:.5 Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-8325-A Pivot Bracket D-839 Mounting Bracket D-833-A Rod Clevis Base Weight:.80 Adder Per Inch of Stroke:.5 Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-839 Mounting Bracket Base Weight:.90 Adder Per Inch of Stroke:.30 2-/2" Bore MRS Air MRS-50 -D $72.45 Add $2.70 per inch of stroke Nose Mount 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-8320 Mounting Bracket Base Weight: 2.48 Adder Per Inch of Stroke:.20 Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.8 For Technical Assistance:

82 MRS Magnetic Reed Switch Air 2-/2" Bore MRS Air (continued) MRS-50 -DXP $80.70 Add $2.70 per inch of stroke MRS-50 DXDE $94.85 Add $4.20 per inch of stroke Double End or Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-8326-A Pivot Bracket D-8320 Mounting Bracket D-834-A Rod Clevis Base Weight: 2.90 Adder Per Inch of Stroke:.20 Double End Rod Double End Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-8320 Mounting Bracket Base Weight: 3.5 Adder Per Inch of Stroke:.40 D-770 $2.20 MRS Accessories 9/6" Bore Accessories D-850 $3.05 D-232-A $3.35 Mounting Bracket D-54 $.30 Rod Clevis Pivot Bracket Mounting Nut.82

83 MRS Accessories continued D-29 $2.45 3/4" Bore Accessories D-039-A $5.60 D-03-A $3.35 Standard Air Three-Position Cushion Mounting Bracket Rod Clevis Pivot Bracket D-9 $.40 MRS Non-Rotating Mounting Nut D-835 $2.85 -/6" Bore Accessories D-8309-A $5.70 D-832-A $3.65 PC All Stainless Repairable Z Line Air Mounting Bracket D-3556 $.50 Rod Clevis Pivot Bracket Rod Lock 500 Hydraulic Mounting Nut Hole Punch.83 For Technical Assistance:

84 MRS Accessories continued D-836 $3.85 -/4" Bore Accessories D-830-A $5.95 D-8322-A $5.5 Mounting Bracket D-2545 $.85 Rod Clevis Pivot Bracket Mounting Nut D-837 $5.20 -/2" Bore Accessories D-83-A $6.65 D-8323-A $6.50 Mounting Bracket D-33 $2.05 Rod Clevis Pivot Bracket Mounting Nut.84

85 MRS Accessories continued D-838 $5.90-3/4" Bore Accessories D-832-A $7.60 D-8324-A $7.80 Standard Air Three-Position Cushion Mounting Bracket D-8484 $3.05 Rod Clevis Pivot Bracket MRS Non-Rotating Mounting Nut D-839 $6.50 2" Bore Accessories D-833-A $9.55 D-8325-A $9.0 PC All Stainless Repairable Z Line Air Mounting Bracket Rod Clevis Pivot Bracket Rod Lock D-508 $ Hydraulic Mounting Nut Hole Punch.85 For Technical Assistance:

86 MRS Accessories continued D-8320 $7.5 2-/2" Bore Accessories D-834-A $.25 D-8326-A $0.20 Mounting Bracket D-2540 $3.90 Rod Clevis Pivot Bracket Mounting Nut.86

87 Non-Rotating Original Line Air Bimba s new Non-Rotating Original Line stainless steel body air cylinder design consists of a unique square piston rod with rounded corners. The square rod prevents rotation better than other rod configurations, and the rounded corners provide longer seal life than conventional hexagon rods. The unusual geometry of the square rod also provides superior rotation control. All bore sizes have a rotational control of less than or equal to ±3 degrees. The special high strength aluminum alloy rod guide provides high load carrying capability and abrasion resistance. The urethane-based rod seal provides excellent seal life and leak-free service. The Non-Rotating Original Line cylinder is dimensionally interchangeable with the standard Original Line stainless steel cylinder. 9/6" Bore Non-Rotating Air New! Stainless Steel Piston Rod Standard. Unique Square Piston Rod with Rounded Corners. High Strength Aluminum Alloy Rod Guide. Urethane-based Rod Seal. Buna N U Cup Piston Seal. Pressure Rating PSI Maximum (Air only) Available in Double Acting and Reverse Acting Models. Enclosed Spring Force: 2 lbs. Relaxed - 4 lbs. Compressed. Standard Buna N Seals Temperature Range of -20 F (-25 C) to 200 F (95 C) Enter Stroke Length as 3rd Digit NR-02 -D $22.05 Add $.60 per inch of stroke OPTIONS NO CHARGE: MAGNALUBE G (G) SIDE PORTED REAR HEAD (Q) PORTS ROTATED (K) REVERSE ACTING BUMPERS (B) additional Add.062 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Add per inch of extension MAGNET (prefix M) Reverse acting add.25 to overall length Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. HIGH TEMPERATURE SEALS (V) Temperature Range : 0 to 400 F (-8 to 205 C) Double acting, Reverse acting, Double Acting Air Return- Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 0" D-770 Mounting Bracket Base Weight:.09 Adder Per Inch of Stroke:.02 Magnalube is a registered trademark of the Carleton-Stuart Corporation. Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.87 For Technical Assistance:

88 9/6" Bore Non-Rotating Air NR-02 -DXP $29.20 Add $.60 per inch of stroke 9/6" Bore Non-Rotating Air (continued) Double Acting Double End or Rear Pivot Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 0" D-770 Mounting Nut D-850 Rod Clevis D-232-A Pivot Bracket Base Weight:.09 Adder Per Inch of Stroke:.02 NR-02 -R $25.25 Add $2.5 per inch of stroke NR-02 -RP $32.25 Add $2.5 per inch of stroke Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3" Maximum Stroke 4" D-770 Mounting Bracket Base Weight:.08 Adder Per Inch of Stroke:.04 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3" Maximum Stroke 4" D-850 Rod Clevis D-232-A Pivot Bracket Base Weight:.08 Adder Per Inch of Stroke:.04.88

89 3/4" Bore Non-Rotating Air New! Stainless Steel Piston Rod Standard. Unique Square Piston Rod with Rounded Corners. High Strength Aluminum Alloy Rod Guide. Urethane-based Rod Seal. Buna N U Cup Piston Seal. Pressure Rating 250 PSI Maximum (Air only) Available in Double Acting and Reverse Acting Models. Enclosed Spring Force: 3 lbs. Relaxed 6 lbs. Compressed. Standard Buna N Seals Temperature Range of -20ºF (-25ºC) to 200ºF (95ºC) Enter Stroke Length as 3rd Digit OPTIONS NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) SIDE PORTED REAR HEAD (Q) PIVOT BUSHING (Y) REVERSE ACTING BUMPERS (B) additional Add.062 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Add per inch of extension MAGNET (prefix M) Reverse acting add.25" to overall length Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. HIGH TEMPERATURE SEALS (V) Temperature Range : 0 to 400 F (-8 to 205 C) Reverse acting, Double acting, Standard Air Three-Position Cushion MRS Non-Rotating NR-04 -D $23.5 Add $.65 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Option Accessory: D-29 Mounting Bracket Base Weight :.2 Adder Per Inch of Stroke:.03 PC All Stainless Repairable NR-04 -DXP $30.05 Add $.65 per inch of stroke Double Acting Double End or Rear Pivot Mounting Air Return 2, ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 24" D-29 Mounting Bracket D-66-3 Rod Clevis D-3498-A Pivot Bracket Base Weight:.29 Adder Per Inch of Stroke:.03 Z Line Air Rod Lock 500 Hydraulic Hole Punch.89 For Technical Assistance:

90 3/4" Bore Non-Rotating Air 3/4" Bore Non-Rotating Air (continued) NR-04 -R $25.50 Add $2.5 per inch of stroke Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" D-29 Mounting Bracket Base Weight:.8 Adder Per Inch of Stroke:.07 NR-04 -RP $32.95 Add $2.5 per inch of stroke BFNR-04 -D $38.5 Add $.65 per inch of stroke BFNR-04 -R $4.0 Add $2.5 per inch of stroke BFTNR-04 -D $50.35 Add $.65 per inch of stroke Reverse Single Acting Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" D-67 Mounting Brackets D-66-3 Piston Rod Clevis Base Weight:.8 Adder Per Inch of Stroke:.07 Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.22 Adder Per Inch of Stroke:.03 Pull Type Front Block Mounting Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2, 2 2", 3", 4" Maximum Stroke 6" Base Weight:.9 Adder per inch of stroke:.07 Double Acting Front Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-66-3 Rod Clevis Base Weight:.29 Adder Per Inch of Stroke: MIN, OPPOSITE SIDE.38 MIN, OPPOSITE SIDE.90

91 -/6" Bore Non-Rotating Air New! Stainless Steel Piston Rod Standard. Unique Square Piston Rod with Rounded Corners. High Strength Aluminum Alloy Rod Guide. Urethane-based Rod Seal. Buna N U Cup Piston Seal. Pressure Rating 250 PSI Maximum (Air only) Available in Double Acting and Reverse Acting Models. Enclosed Spring Force: 6 lbs. Relaxed 2 lbs. Compressed. Standard Buna N Seals Temperature Range of -20ºF (-25ºC) to 200º F (95ºC) Enter Stroke Length as 3rd Digit OPTIONS NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) SIDE PORTED REAR HEAD (Q) PIVOT BUSHING (Y) REVERSE ACTING BUMPERS (B) additional Add.062 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Add per inch of extension MAGNET (prefix M) Reverse acting add.25 " to overall length Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. HIGH TEMPERATURE SEALS (V) Temperature Range : 0 to 400 F (-8 to 205 C) Reverse acting, Double acting, NR-09 -D $26.25 Add $.65 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Option Accessory: D-29 Mounting Bracket Base Weight :.33 Adder Per Inch of Stroke:.05 Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable NR-09 -DXP $35.65 Add $.65 per inch of stroke NR-09 -R $28.50 Add $2.70 per inch of stroke Double Acting Double End or Rear Pivot Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 24" D-29 Mounting Bracket D-66- Rod Clevis D-3498-A Pivot Bracket Base Weight:.33 Adder Per Inch of Stroke:.05 Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" D-29 Mounting Bracket Base Weight:.24 Adder Per Inch of Stroke:.6 Z Line Air Rod Lock 500 Hydraulic Hole Punch.9 For Technical Assistance:

92 -/6" Bore Non-Rotating Air -/6" Bore Non-Rotating Air (continued) NR-09 -RP $33.85 Add $2.70 per inch of stroke BFNR-09 -D $42.55 Add $.65 per inch of stroke BFNR-09 -R $46.55 Add $2.70 per inch of stroke BFTNR-09 -D $5.75 Add $.65 per inch of stroke Reverse Single Acting Pivot or Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" D-66- Piston Rod Clevis D-67 Mounting Bracket Base Weight:.22 Adder Per Inch of Stroke:.6 Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.49 Adder Per Inch of Stroke:.05 Reverse Single Acting Front Block Mounting Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" Base Weight:.36 Adder Per Inch of Stroke:.6 Double Acting Front Block Trunnion Mounting Air Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-66- Rod Clevis Base Weight:.49 Adder Per Inch of Stroke:.05.3 MIN, OPPOSITE SIDE.3 MIN, OPPOSITE SIDE.92

93 -/2" Bore Non-Rotating Air New! Stainless Steel Piston Rod Standard. Unique Square Piston Rod with Rounded Corners. High Strength Aluminum Alloy Rod Guide. Urethane-based Rod Seal. Buna N U Cup Piston Seal. Pressure Rating 250 PSI Maximum (Air only) Available in Double Acting and Reverse Acting Models. Enclosed Spring Force: 8.5 lbs. Relaxed 7 lbs. Compressed. Standard Buna N Seals Temperature Range of -20ºF (-25ºC) to 200ºF (95ºC) Enter Stroke Length as 3rd Digit OPTIONS NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) SIDE PORTED REAR HEAD (Q) PIVOT BUSHING (Y) REVERSE ACTING BUMPERS (B) additional Add.062 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Add per inch of extension MAGNET (prefix M) Reverse acting add.25" to overall length Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. HIGH TEMPERATURE SEALS (V) Temperature Range : 0 to 400 F (-8 to 205 C) Reverse acting, Double acting, Standard Air Three-Position Cushion MRS Non-Rotating NR-7 -D $47.70 Add $2.45 per inch of stroke NR-7 -DXP $58.40 Add $2.45 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-24 Mounting Bracket Base Weight:.69 Adder Per Inch of Stroke:.08 Double Acting Double End or Rear Pivot Mounting Air Return 2", ", 2", 2, 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 24" D-24 Mounting Bracket D-23- Rod Clevis D-229 Pivot Bracket Base Weight:.82 Adder Per Inch of Stroke:.08 PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.93 For Technical Assistance:

94 -/2" Bore Non-Rotating Air -/2" Bore Non-Rotating Air (continued) NR-7 -R $46.95 Add $3.85 per inch of stroke NR-7 -RP $53.50 Add $3.85 per inch of stroke BFNR-7 -D $67.30 Add $2.45 per inch of stroke BFNR-7 -R $69.90 Add $3.85 per inch of stroke BFTNR-7 -D $77.50 Add $2.45 per inch of stroke Reverse Single Acting Pull Type Rod Normally Extended Spring Return Spring force 8.5 lbs. relaxed, 7 lbs. compressed - Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" D-24 Mounting Bracket Base Weight:.44 Adder Per Inch of Stroke:.22 Reverse Single Acting Pivot and Pull Type Rod Normally Extended Spring Return Spring Force 8.5 lbs. relaxed, 7 lbs. compressed Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" D-23- Piston Rod Clevis D-229 Mounting Bracket Base Weight:.45 Adder Per Inch of Stroke:.22 Double Acting Front Block Mounting Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.99 Adder Per Inch of Stroke:.08 Pull Type Front Block Mounting Rod Normally Extended Reverse Single Acting Spring Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 6" Base Weight:.96 Adder Per Inch of Stroke:.22 Double Acting Front Block Trunnion Mounting Spring Return 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 2" TRB-2 Trunnion Brackets D-23- Rod Clevis Base Weight:.06 Adder Per Inch of Stroke: MIN, OPPOSITE SIDE.38 MIN, OPPOSITE SIDE.94

95 2" Bore Non-Rotating Air New! Stainless Steel Piston Rod Standard. Unique Square Piston Rod with Rounded Corners. High Strength Aluminum Alloy Rod Guide. Urethane-based Rod Seal. Buna N U Cup Piston Seal. Pressure Rating 250 PSI Maximum (Air only) Available in Double Acting and Reverse Acting models. Enclosed Spring Force: 5 lbs. Relaxed 30 lbs. Compressed. Standard Buna N Seals Temperature Range of -20ºF (-25ºC) to 200ºF (95ºC) Enter Stroke Length as 3rd Digit OPTIONS NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) SIDE PORTED REAR HEAD (Q) REVERSE ACTING BUMPERS (B) additional Add.062 to overall length DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Add per inch of extension MAGNET (prefix M) Reverse acting add.25" to overall length Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. HIGH TEMPERATURE SEALS (V) Temperature Range : 0 to 400 F (-8 to 205 C) Reverse acting, Double acting, Standard Air Three-Position Cushion MRS Non-Rotating NR-3 -D $69.35 Add $2.85 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2 D-65 Mounting Bracket D-508 Mounting Nut Base Weight:.40 Adder Per Inch of Stroke:.5 PC All Stainless Repairable NR-3 -DXP $83.5 Add $2.85 per inch of stroke Double Acting Universal Mounting Type Pivot or Double End Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 24" D-65 Mounting Bracket D-23-3 Rod Clevis D-620 Pivot Bracket D-508 Mounting Nut Base Weight:.62 Adder Per Inch of Stoke:.5 Z Line Air Rod Lock 500 Hydraulic Hole Punch.95 For Technical Assistance:

96 2" Bore Non-Rotating Air NR-3 -R $83.30 Add $5.30 per inch of stroke 2" Bore Non-Rotating Air (continued) Reverse Single Acting Pull Type Rod Normally Extended Spring Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-29 Mounting Bracket D-508 Mounting Nut Base Weight:.24 Adder Per Inch of Stroke:.43 NR-3 -RP $9.20 Add $5.30 per inch of stroke Reverse Single Acting Pivot or Pull Type Rod Normally Extended Spring Return Rear Pivot Mounting 2", ", 2", 2", 2 2", 3", 4" Maximum Stroke 4" D-23-3 Piston Rod Clevis D-620 Pivot Bracket D-508 Mounting Nut D-65 Mounting Bracket Base Weight:.46 Adder Per Inch of Stroke:.43.96

97 2-/2" Bore Non-Rotating Air New! Stainless Steel Piston Rod Standard. Unique Square Piston Rod with Rounded Corners. High Strength Aluminum Alloy Rod Guide. Urethane-based Rod Seal. Buna N U Cup Piston Seal. Pressure Rating 250 PSI Maximum (Air only) Available in Double Acting. Standard Buna N Seals Temperature Range of -20ºF (-25ºC) to 200º F (95ºC) Enter Stroke Length as 3rd Digit OPTIONS NO CHARGE: MAGNALUBE G (G) PORTS ROTATED (K) SIDE PORTED REAR HEAD (Q) DOUBLE ACTING BUMPERS (B) additional Add.25 to overall length MOLYCOATED BODY (F) Add per inch of stroke EXTRA EXTENSION (EE) Add per inch of extension MAGNET (prefix M) Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. HIGH TEMPERATURE SEALS (V) Temperature Range : 0 to 400 F (-8 to 205 C) Double acting, Standard Air Three-Position Cushion MRS NR-50 -D $99.55 Add $3.5 per inch of stroke Double Acting Air Return Front Nose Mounting 2", ", 2", 2", 2 2", 3", 4", 5", 6" Maximum Stroke 2" D-65- Mounting Bracket D-2540 Mounting Nut Base Weight:.98 Adder Per Inch of Stroke:.7 Non-Rotating PC NR-50 -DXP $0.85 Add $3.5 per inch of stroke Double Acting Universal Mounting Type Pivot or Double End Air Return 2", ", 2", 2", 2 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 24" D-65- Mounting Bracket D-23-3 Rod Clevis D-620 Pivot Bracket D-2540 Mounting Nut Base Weight: 2.27 Adder Per Inch of Stroke:.7 All Stainless Repairable Z Line Air Rod Lock Accessories For 9/6'' bore, see page.20. For 3/4'' bore, see page.28. For -/6'' bore, see page.40. For -/2'' bore, see page.53. For 2'' bore, see page.60. For 2-/2'' bore, see page Hydraulic Hole Punch.97 For Technical Assistance:

98 PC The Bimba PC Cylinder has a stainless steel body, stainless steel rod and acetal resin end caps. It is ideal for applications and environments that require exposure to moisture, lubricants and specific solvents. How to Order The model number of all PC consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please refer to the charts below for an example of model number PC-096-DXPW. This is an -/6" bore, 6" stroke PC cylinder with a universal mount and rod wiper. PC 09 6 DXP W Delrin End Cap Cylinder Bore Size 02 9/6" 04 3/4" 09 -/6" 7 -/2" 3 2" Standard Stroke Lengths All models: /2", ", -/2", 2", 2-/2", 3", 4", 5", 6" DXP & DXDE models: 7", 8", 9", 0", ", 2" Consult your local distributor for price and availablity of nonstandard strokes D DXP DXDE Mounting Nose Mount Universal Mount Double Ended Rod B C C C2 E Options Bumpers Air Cushions, both ends Air Cushion, front end only Air Cushion, rear head only Non-Lube Service 9/6" = 0.2 3/4" = 0.4 -/6" = 0.9 -/2" =.7 2" = 3. Approximate Power Factors For example, a PC-096-DXPW will exert a force of 0.9 times the air line pressure; a PC-73-D will exert a force of.7 times the air pressure, etc..98 EEX.XX F G K M NT Q T V W Extra Extension Molycoated Body Magnalube G Pivot 90 (DXP model only) Magnetic Piston No Thread Side Ported Rear Head Switch Track (T2,T3 or T4, see Related Products, pg. 8.2) Fluoroelastomer Seals (for compatibility only) Rod Wiper (not available for 9/6" bore)

99 PC List Prices Standard Air Mounting Options Bore 9/6" (02) D $28.25 DXP $30.0 Stroke Adder* $.40 B Bumpers $3.80 C N/A C or C2 N/A C with V D & DXP N/A CV or C2V** D & DXP N/A EE Extra Extension per inch $.75 F Molycoated Body per inch $2.40 K Pivot 90 (DXP only) M Magnetic Piston $8.75 T Switch Track (T2,T3,T4) V Fluoroelastomer Seals $9.90 W Rod Wiper N/A Three-Position 3/4" (04) -/6" (09) $3.55 -/2" (7) 2" (3) $63.30 $34.5 $68.45 $.40 $2.40 $3.80 $5.90 $5.80 $29.95 $7.90 $5.00 $34.40 $58.95 $26.50 $44.00 $.75 $.20 $2.40 $2.40 N/C $0.85 $5.25 $2.60 per Track $.85 $6.75 $2.60 $2.60 Cushion Bore Mounting DXDE Stroke Adder* B Bumpers 9/6" (02) $39.45 $.85 $3.80 3/4" (04) -/6" (09) $46.60 $.85 $3.80 -/2" (7) 2" (3) $88.75 $3.60 $5.90 Options *Nonstandard fractional strokes are priced to the next full inch increment. **Price adder includes the cushion and the floroelastomer seals. No charge Option - G, NT, Q NOTE: See Original Line portion of the catalog for option E pricing. Stainless Steel Accessory Prices Bore C N/A $5.80 $29.95 C with V** N/A $37.45 $64.0 CV Rod End Clevis N/A $29.55 $49.5 EE Extra Extension per inch $.95 $.95 $.80 F Molycoated Body per inch $2.40 $2.40 $2.40 M Magnetic Piston $8.75 $0.85 $5.25 Mounting Nut Model Price Model Price 9/6" (02) D-850-SS $7.05 D-54-SS $.90 3/4" (04) D SS D-9-SS -/6" (09) D SS $2.35 D-9-SS $.35 -/2" (7) D SS D-33-SS 2" (3) D SS $3.00 D-508-SS $4.75 T Switch Track (T2,T3,T4) $2.60 per Track V Fluoroelastomer Seals $3.05 $5.05 $22.5 W Rod Wiper N/A $5.20 $5.20 MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock Bore Foot Bracket Pivot Bracket Model Price Model Price 9/6" (02) D-770-SS $4.40 D SS $2.00 3/4" (04) D-29-SS D SS -/6" (09) D-29-SS $4.80 D SS $4.55 -/2" (7) D-6288-SS $0.00 D SS $8.5 2" (3) D-65-SS $2.40 D SS $ Hydraulic Hole Punch.99 For Technical Assistance:

100 PC Dimensions D Mounting Style D I B C E A + STROKE F(2) G H ØJ K O N M L DXP Mounting Style A + STROKE D I B C E F(2) E P Q R H K ØJ O N L (BOTH ENDS) M (BOTH ENDS) S DXDE Mounting D I B C E A + (2 x STROKE) F(2) E C B I D H ØJ N(BOTH ENDS) O(BOTH ENDS) L(BOTH ENDS) M(BOTH ENDS).00

101 PC Dimensions D Mounting Style Bore A A (cushion or B C D E F G H H Q option) (cushion option) I J K L M N O 9/6" (02) # /.437 7/ #0-32 3/4" (04) /8 NPT /.624 5/ /4-28 -/6" (09) /8 NPT /.624 5/ /6-24 -/2" (7) /8 NPT / /6-20 2" (3) /4 NPT /.375 -/ /2-20 Magnetic Piston Length Adder: 0.25" for -/6" and -/2", all other sizes 0.250" DXP Mounting Style Bore A B C D E F H H (cushion option) I J 9/6" (02) # /4" (04) /8 NPT /6" (09) /8 NPT /2" (7) /8 NPT " (3) /4 NPT Standard Air Three-Position Cushion MRS Non-Rotating Bore K L M N O P Q R S 9/6" (02) /.437 7/ # /4" (04) /.624 5/ / /6" (09) /.624 5/ / /2" (7) / / " (3) /.375 -/ / Magnetic Piston Length Adder: 0.25" for -/6" and -/2", all other sizes 0.250" Bore A B C D E F H H I J L M N O 9/6" (02) # /.437 7/ #0-32 3/4" (04) /8 NPT /.624 5/ /4-28 -/6" (09) /8 NPT /.624 5/ /6-24 -/2" (7) /8 NPT / /6-20 2" (3) /4 NPT /.375 -/ /2-20 Magnetic Piston Length Adder: 0.250" DXDE Mounting (cushion option) Bumper Length Adder 9/6" (02) 3/4" (04) -/6" (09) -/2" (7) 2" (3) * *For DXDE model, add 0.500" PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.0 For Technical Assistance:

102 PC Dimensions Stainless Steel Mounting Nut* A B Bore Model A B C 9/6" (02) D-54-SS /6-20 3/4" (04) D-9-SS /8-8 -/6" (09) D-9-SS /8-8 -/2" (7) D-33-SS " (3) D-508-SS /4-2 C Stainless Steel Rod End Clevis (includes nut) *See page.03 for torque specifications Stainless Steel Foot Bracket B A C D B E F C E F G H I D I J Ø PIN G A Stainless Steel Rod End Clevis (includes nut) Bore Model A B C D E F G H I J 9/6" (02) D-850-SS # /4" (04) D SS / /6" (09) D SS 5/ /2" (7) D SS 7/ " (3) D SS / Stainless Steel Foot Bracket Bore Model A B C D E F G H I 9/6" (02) D-770-SS /4" (04) D-29-SS /6" (09) D-29-SS /2" (7) D-6288-SS " (3) D-65-SS H.02

103 PC Dimensions Stainless Steel Pivot Bracket A Ø B C D Standard Air Three-Position Ø G(2) H J I F E K Cushion Bore Model A B C D E F G H I J K 9/6" (02) D SS /4" (04) D SS /6" (09) D SS /2" (7) D SS " (3) D SS MRS Non-Rotating Specifications Pressure Rating: 00 psi (Air) Temperature Range: 32 F to 60 F (0 C to 72 C) Delrin End Caps 304 Stainless Steel Body 303 Stainless Steel Rod Anodized Aluminum Alloy Piston Options: Buna N Bumpers Polyurethane Wiper Fluoroelastomer Seals (for compatibility only, not high temperature) PC All Stainless Repairable Z Line Air CYLINDER WEIGHT (lbs.) Bore Base Weight Adder per " D DXP DXDE D & DXP DXDE 9/6" (02) /4" (04) /6" (09) /2" (7) " (3) Bore Size MOUNTING NUT Torque Specifications Thread Size Max Torque (in- lbs.) 9/6" (02) 7/ /4" (04) -/6" (09) 5/ /2" (7) " (3) / Rod Lock 500 Hydraulic Hole Punch.03 For Technical Assistance:

104 All Stainless Steel Repairable (Bell Ring Style) Original Line The new all stainless repairable Original Line cylinders are ideal for food processing, chemical, medical, pharmaceutical, offshore or marine equipment, and energy production or waste management applications. The bell ring design also offers the added benefit of full repairability without the need for hand tools by securing the body to the rod guide with a knurled, threaded nut. 3/4" Bore MODEL/PRICE DESCRIPTION/ACCESSORIES DIMENSIONS (inch) D-46-Astroke (2" max. Base Price: $50.20 Add $.40 per inch of stroke) Double-Acting - Air Return - Front Nose Mounting Optional Stainless Steel Accessories: D-29-SS Foot Bracket D-9-SS Mounting Nut D SS Rod Clevis D-423-Astroke (24" max. Base Price: $87.85 Add $.40 per inch of stroke) Double-Acting - Universal Mounting - Pivot, or Double End Mounting - Air Return Optional Stainless Steel Accessories: D-29-SS Foot Bracket D SS Pivot Bracket D-9-SS Mounting Nut D SS Rod Clevis -/6" Bore MODEL/PRICE DESCRIPTION/ACCESSORIES DIMENSIONS (inch) D-473-Astroke (2" max. Base Price: $55.60 Add $.40 per inch of stroke) Double-Acting - Air Return - Front Nose Mounting Optional Stainless Steel Accessories: D-24-SS Foot Bracket D-3556-SS Mounting Nut D SS Rod Clevis D-4232-A- Base Price: $ Add $.40 per inch of stroke (24" max. stroke) Double-Acting - Universal Mounting - Pivot, or Double End Mounting - Air Return Optional Stainless Steel Accessories: D-24-SS Foot Bracket D SS Pivot Bracket D-3556-SS Mounting Nut D SS Rod Clevis Enter Stroke Length as 4th Digit.04

105 All Stainless Steel Repairable (Bell Ring Style) Original Line Cylinder Assemblies and Component List Standard Air Three-Position 3/4" Bore -/6" Bore ITEM PART NO. DESCRIPTION LIST ITEM PART NO. DESCRIPTION LIST A D-4485-A ROD GUIDE ASSEMBLY (Includes Rod Guide and D-4530 Kit) B D-4530-A ROD SEAL KIT (Includes Seals, Bushing, Seal Retainer and Body Seal) C D-4486-A- PISTON ROD ASSEMBLY (Includes Rod, Piston and D-453 Kit) /in. D D-453-A PISTON SEAL KIT (Includes Piston Seals and Piston Guide Ring) 5.35 E D-396-SS BELL RING 2.80 F D-4487-A- REAR HEAD AND BODY ASSEMBLY /in. (Nose Mount) G D-4488-A- REAR HEAD AND BODY ASSEMBLY (Universal Mount) /in. A D-4489-A ROD GUIDE ASSEMBLY (Includes Rod Guide and D-4533 Kit) B D-4533-A ROD SEAL KIT (Includes Seals, Bushing, Seal Retainer and Body Seal) C D-4490-A- PISTON ROD ASSEMBLY (Includes Rod, Piston and D-4534 Kit) D D-4534-A PISTON SEAL KIT (Includes Piston Seals and Piston Guide Ring) E D-778-SS BELL RING F D-449-A- REAR HEAD AND BODY ASSEMBLY (Nose Mount) G D-4492-A- REAR HEAD AND BODY ASSEMBLY (Universal Mount) SOLID STAINLESS ACCESSORIES (in.) 3/4" Bore /in /in /in. Cushion MRS Non-Rotating PC D-29-SS Foot Bracket $4.80 D SS D SS D-9-SS Rod Clevis Pivot Bracket Mounting Nut $8.80 $4.55 $.35 -/6" Bore All Stainless Repairable Z Line Air Rod Lock D-24-SS Foot Bracket $7.60 D SS Rod Clevis $ Stainless steel body Low friction Buna N "U" Cup seals and rod wiper 303 Stainless steel endcaps, piston rod, and bell ring nut D SS Pivot Bracket $4.55 Engineering Specifications D-3556-SS Mounting Nut $2.20 Pressure Rating: 250 psi (air) Composite FDA approved rod bearing and FDA approved lubricant 500 Hydraulic Hole Punch.05 For Technical Assistance:

106 Z Line Air for extremely tough applications HEX-STUD rod end heat treated alloy steel easily removed in case of failure Piston rod ground and polished type 303 stainless steel CUSHION-QUIET elastomer bumpers for smooth, quiet operation Sintered bronze pivot bushing Buna N U cup piston rod wiper seal ( 6" - 2" - 2" models only) Sintered bronze rod bushing Type 304 stainless steel body Buna N U cup piston seals Piston rod piloted, threaded and riveted into piston The Z-Line air cylinder has the rolled-in construction of the Original Line but features the following: Larger diameter, two-piece 303 stainless steel piston rod HEX-STUD rod end thread of heat treated alloy steel easily removed in case of failure due to overload CUSHION QUIET elastomer bumpers Enter Stroke Length as 3rd Digit OPTIONS: NO CHARGE: MAGNALUBE G (G) EXTRA EXTENSION (EE), PER INCH OF EXTENSION: 3 4" Bore, 6" Bore, 2" Bore, 2" Bore, MOLYCOATED BODY (F) Add per inch of stroke MAGNET (prefix M) 3 4" Bore, 6" Bore, 2" Bore, 2" Bore, Must specify track(s) for use with miniature position sensing (T2, T3, T4) add per track. See Related Products, page 8.2 for details. 04 -DBZ $38.35 Add $.50 per inch of stroke 3/4" Bore Z Line Air Push Force =.44 x psi Pull Force =.365 x psi Block Mount Double Acting Two bolt holes are provided for positive mounting to a base. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.30 Adder Per Inch of Stroke:.04.06

107 Z Line Air 04 -DUZ $33.00 Add $.50 per inch of stroke 3/4" Bore Z Line Air (continued) Push Force =.44 x psi Pull Force =.365 x psi Universal Mount Double Acting For double end mounting use D-835 mounting bracket. For rear pivot mounting use D-832-A pivot bracket. Use D-039-A rod clevis. ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Base Weight:.30 Adder Per Inch of Stroke:.04 Standard Air Three-Position Cushion 04 -DZ $29.60 Add $.50 per inch of stroke Nose Mount Double Acting Use D-835 mounting bracket. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.27 Adder Per Inch of Stroke:.04 MRS Non-Rotating 09 -DBZ $5.00 Add $.95 per inch of stroke -/6" Bore Z Line Air Push Force =.886 x psi Pull Force =.776 x psi Block Mount Double Acting Four bolt holes are provided for positive mounting to a base. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.55 Adder Per Inch of Stroke:.06 PC All Stainless Repairable Z Line 09 -DUZ $39.20 Add $.95 per inch of stroke Universal Mount Double Acting For double end mounting use D-836 mounting bracket. For rear pivot mounting use D-8322-A pivot bracket. Use D-8309-A rod clevis. ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Base Weight:.45 Adder Per Inch of Stroke:.06 Rod Lock 500 Hydraulic Hole Punch.07 For Technical Assistance:

108 Z Line Air 09 -DZ $34.70 Add $.95 per inch of stroke -/6" Bore Z Line Air (continued) Push Force =.886 x psi Pull Force =.776 x psi Nose Mount Double Acting Use D-836 mounting bracket. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.38 Adder Per Inch of Stroke: DBZ $70.55 Add $2.30 per inch of stroke -/2" Bore Z Line Air Push Force =.77 x psi Pull Force =.57 x psi Block Mount Double Acting Four bolt holes are provided for positive mounting to a base. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.00 Adder Per Inch of Stroke:.0 7 -DUZ $59.65 Add $2.30 per inch of stroke 7 -DZ $54.50 Add $2.30 per inch of stroke Universal Mount Double Acting For double end mounting use D-838 mounting bracket. For rear pivot mounting use D-8324-A pivot bracket. Use D-83-A rod clevis. ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Base Weight:.92 Adder Per Inch of Stroke:.0 Nose Mount Double Acting Use D-838 mounting bracket. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.78 Adder Per Inch of Stroke:.0.08

109 Z Line Air 3 -DBZ $92.90 Add $2.55 per inch of stroke 2" Bore Z Line Air Push Force = 3.4 x psi Pull Force = 2.83 x psi Block Mount Double Acting Four bolt holes are provided for positive mounting to a base. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight: 2.03 Adder Per Inch of Stroke:.5 Standard Air Three-Position Cushion 3 -DUZ $78.05 Add $2.55 per inch of stroke Universal Mount Double Acting For double end mounting use D-839 mounting bracket. For rear pivot mounting use D-8325-A pivot bracket. Use D-833-A rod clevis. ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" Base Weight: 2.5 Adder Per Inch of Stroke:.5 MRS Non-Rotating 3 -DZ $7.50 Add $2.55 per inch of stroke Nose Mount Double Acting Use D-839 mounting bracket. ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.9 Adder Per Inch of Stroke:.5 PC All Stainless Repairable D-835 $2.85 Z Line Accessories 3/4" Bore Accessories D-039-A $5.60 D-832-A $3.65 Z Line Rod Lock 500 Hydraulic Mounting Bracket Rod Clevis Pivot Bracket Hole Punch.09 For Technical Assistance:

110 Z Line Accessories continued D-3556 $.50 3/4" Bore Accessories (continued) Mounting Nut D-836 $3.85 -/6" Bore Accessories D-8309-A $5.70 D-8322-A $5.5 Mounting Bracket D-2545 $.85 Rod Clevis Pivot Bracket Mounting Nut D-838 $5.90 -/2" Bore Accessories D-83-A $6.65 D-8324-A $7.80 Mounting Bracket Rod Clevis Pivot Bracket.0

111 Z Line Accessories continued D-8484 $3.05 -/2" Bore Accessories (continued) Standard Air Three-Position Mounting Nut 2" Bore Accessories Cushion D-839 $6.50 D-833-A $9.55 D-8325-A $9.0 MRS Non-Rotating Mounting Bracket Rod Clevis Pivot Bracket PC D-508 $3.05 All Stainless Repairable Mounting Nut Z Line 3 4" BORE D-9868 $3.30 6" BORE D-6583 $3.65 Hex-Stud 2" BORE D-6636 $5.70 2" BORE D-6637 $7.05 Rod Lock 500 Hydraulic Hole Punch. For Technical Assistance:

112 Rod Lock The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut down. How to Order The model number for all Original Line Rod Lock cylinders consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. Please note the following features are standard, and are included in all model numbers: BFLM (Block Front with Magnet) and W (Rod Wiper). Product Type BFLM - Original Line Rod Lock (Block Front and Magnet Standard) Bore Size 04-3/4" /6" 7 - -/2" 3-2" 50-2-/2" 70-3" Standard Stroke Lengths Refer by bore size to OL double-acting standard stroke lengths BFLM DW D DXP Mounting Style -Axial Rear Port Universal Mount - (Includes pivot bushing) Options B - Double Acting Bumpers F - Molycoated Body ID N - Low Temperature Operation (-40 F to +200 F) Q - Side Port Rear Head T2, T3, T4 - Add Track for MS Series Switch V - High Temperature Operation (0 F to +400 F) W - Rod Wiper (standard) EE - Extra Rod Extension.2

113 Rod Lock List Prices Mounting Style Bumpers Molycoat Add per Low Temp Switch Track High Temp Extra Extension Bore D DXP " Stroke F T2, T3, T4 EE B N V (per inch) (per track) (per inch) 3/4" (04) $87.80 $9.95 $.65 $3.80 $2.40 $.90 $2.60 $2.50 $0.90 -/6" (09) -/2" (7) $43.5 $48.35 $2.60 $4.60 $2.40 $3.40 $2.60 $6.40 $.60 2" (3) 2-/2" (50) $ $ $3.05 $5.90 $2.40 $5.50 $2.60 $2.00 $2.05 3" (70) Standard Air Three-Position Cushion Dimensions D Mounting Style MRS Non-Rotating PC All Stainless Repairable DXP Mounting Style Z Line Air Rod Lock 500 Hydraulic Hole Punch.3 For Technical Assistance:

114 Rod Lock Dimensions (in.) D Model Bore A B C D E F G H J K L 3/4" (04) /4-28 UNF-2A #0-32 UNF-2B -/6" (09) /6-24 UNF-2A #0-32 UNF-2B -/2" (7) /6-20 UNF-2A /8 NPT 2" (3) /2-20 UNF-2A /8 NPT 2-/2" (50) /2-20 UNF-2A /4 NPT 3" (70) /8-6 UNF-2A /4 NPT Bore M N O P Q R S T U 3/4" (04) # /8 NPT /6" (09) # /8 NPT /2" (7) / /4 NPT " (3) 3/ /4 NPT /2" (50) 7/ /4 NPT " (70) / /8 NPT DXP Model Bore A U V W X Y Z AA BB 3/4" (04) /8-8 UNF-2A /6" (09) /8-8 UNF-2A /2" (7) UNF-2A " (3) /4-2 UNF-2A /2" (50) /8-2 UNF-2A " (70) /2-2 UNF-2A Options Dimensional Deviations from Standard Dimensional Option Deviation Use DXP model, Q - Side Port Rear Head omit rear pivot tang B - Bumpers 04 - no adder Add to Overall Length by Bore Size: " 7 -.3" " " ".4

115 Rod Lock How It Works Dowel pins ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In absense of pressure, the spring actuates piston and dowels follow to closed position, activating the rod clamp. UNCLAMPED CLAMPED Standard Air Three-Position PORT: 50 PSI MIN ACTIVATES PISTON TO RELEASE CLAMP ROD LOCK PISTON PISTON CAP PISTON Cushion PISTON SEAL CAM SPRING DOWEL PIN ROD CLAMP ROD GUIDE FLAT WASHER BUTTONHEAD CAP SCREW SEAL RETAINER CAM MRS DOWEL PINS ROD CLAMP Non-Rotating ROD WIPER ROD BUSHING ROD SEAL Engineering Specifications Operating Medium: Operating Pressure: Temperature Range: Lubrication: Cylinder body: Rod Guide, Rear Head: Cap: Piston & Rod Seal: Rod & Pivot Bushing: Piston Rod: Expected Service Life: Air 50 psi minimum (to actuate lock piston) 25 psi maximum -20 to +200 degrees F HT stainless steel Aluminum Anodized aluminum Buna-N Sintered bronze Hard chrome plated stainless steel 5 million cylinder actuations million lock actuations PC All Stainless Repairable Z Line Air Rod Lock Rod Lock Holding Forces Bore Holding Force (Pounds) 3/4" (04) 40 -/6" (09) 90 -/2" (7) 70 2" (3) 30 2-/2" (50) 500 3" (70) 700 Operating Guidelines/Product Precautions The Rod Lock is not a safety device. Do not use for intermediate stopping; the cylinder is designed to prevent drift from a stationary position. Load weight must not exceed the stated holding force for the cylinder. 500 Hydraulic Hole Punch.5 For Technical Assistance:

116 Hydraulic HEX-STUD made from heat treated alloy steel. In case of failure due to overload, the hexagon portion will remain in rod and can be easily removed Sintered bronze piston rod guide bushing O ring TIE-BANDS reinforce both ends of type 304 stainless steel body rolled in a groove on the periphery of each end cap doubling joint strength O ring Leather Back-up rings Sintered bronze pivot bushing High strength aluminum alloy endcaps & piston Buna N rod wiper seal assures dry drip free piston rod Block V seal with back up washer Piston rod hard chrome plated 85,000 to 00,000 psi min. yield steel Filled PTFE bearing Buna N block V seals with back up washers Piston rod piloted into piston threaded and riveted The Bimba 500 is a precision built, compact, lightweight hydraulic cylinder designed specifically for hydraulic use only, at pressures up to 500 psi. Rated 500 PSI Hydraulic (non-shock), Double Acting OPTIONS: EXTRA EXTENSION (EE), PER INCH OF EXTENSION: 6" Bore, add per inch 2" Bore, add per inch 2" Bore, add per inch PORTS ROTATED 90 DEGREES (K) (no charge) Enter Stroke Length as 3rd Digit OPTIONS continued MAGNET (prefix M) Example: HM-096-DZ 4" stroke or greater required Overall length increases by 0.25" 6" Bore, 2" Bore, 2" Bore, FLUOROELASTOMER SEALS (V) Specify for compatibility 6" Bore, 2" Bore, 2" Bore,.6

117 500 Hydraulic H-09 -DBZ $56.20 Add $.85 per inch of stroke -/6" Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.57 Adder Per Inch of Stroke:.06 Standard Air Three-Position Cushion H-09 -DUZ $50.30 Add $.85 per inch of stroke H-09 -DZ $46.05 Add $.85 per inch of stroke Universal Mount Double End or Rear Pivot ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-836 Mounting Bracket D-8322-A Pivot Bracket D-8309-A Clevis Base Weight:.50 Adder Per Inch of Stroke:.06 Nose Mount ", 2", 3", 4", 5", 6", 7" Maximum Stroke 2" D-836 Mounting Bracket Base Weight:.43 Adder Per Inch of Stroke:.06 MRS Non-Rotating PC All Stainless Repairable H-7 -DBZ $8.45 Add $2.40 per inch of stroke -/2" Bore 500 Hydraulic Push Force =.77 x psi Pull Force =.57 x psi Front Block Mount ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.00 Adder Per Inch of Stroke:.0 Z Line Air Rod Lock 500 Hydraulic Hole Punch.7 For Technical Assistance:

118 500 Hydraulic H-7 -DUZ $75.0 Add $2.40 per inch of stroke -/2" Bore 500 Hydraulic (continued) Push Force =.77 x psi Pull Force =.57 x psi Universal Mount Double End or Rear Pivot ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-838 Mounting Bracket D-8324-A Pivot Bracket D-83-A Clevis Base Weight:.95 Adder Per Inch of Stroke:.0 H-7 -DZ $70.30 Add $2.40 per inch of stroke Nose Mount ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 2" D-838 Mounting Bracket Base Weight:.84 Adder Per Inch of Stroke:.0 H-3 -DBZ $06.35 Add $2.75 per inch of stroke 2" Bore 500 Hydraulic Push Force = 3.4 x psi Pull Force = 2.83 x psi Front Block Mount ", 2", 3", 4", 5", 6" Maximum Stroke 2" Base Weight:.90 Adder Per Inch of Stroke:.24 H-3 -DUZ $99.55 Add $2.75 per inch of stroke Universal Mount Double End or Rear Pivot ", 2", 3", 4", 5", 6", 7", 8", 9", 0", ", 2" Maximum Stroke 32" D-839 Mounting Bracket D-8325-A Pivot Bracket D-833-A Clevis Base Weight:.75 Adder Per Inch of Stroke:.24.8

119 500 Hydraulic 2" Bore 500 Hydraulic (continued) Push Force = 3.4 x psi Pull Force = 2.83 x psi Standard Air H-3 -DZ $93.00 Add $2.75 per inch of stroke Nose Mount ", 2", 3", 4", 5", 6" Maximum Stroke 2" D-839 Mounting Bracket Base Weight:.63 Adder Per Inch of Stroke:.24 Three-Position Cushion 500 Hydraulic Cylinder Accessories D-836 $3.85 -/6" Bore Accessories D-8309-A $5.70 D-8322-A $5.5 MRS Non-Rotating PC Mounting Bracket Rod Clevis Pivot Bracket All Stainless Repairable D-2545 $.85 Z Line Air Mounting Nut Rod Lock 500 Hydraulic Hole Punch.9 For Technical Assistance:

120 500 Hydraulic Cylinder Accessories continued D-838 $5.90 -/2" Bore Accessories D-83-A $6.65 D-8324-A $7.80 Mounting Bracket D-8484 $3.05 Rod Clevis Pivot Bracket Mounting Nut D-839 $6.50 2" Bore Accessories D-833-A $9.55 D-8325-A $9.0 Mounting Bracket D-508 $3.05 Rod Clevis Pivot Bracket Mounting Nut.20

121 500 Hydraulic Cylinder Accessories continued 6" BORE D-6583 $3.65 Hex-Stud 2" BORE D-6636 $5.70 2" BORE D-6637 $7.05 Standard Air Three-Position Cushion MRS Non-Rotating PC All Stainless Repairable Z Line Air Rod Lock 500 Hydraulic Hole Punch.2 For Technical Assistance:

122 Hole Punch Designed to punch millions of holes in plastic or other thin sheet materials 2 to 3 mils thick, the long-life BIMBA Pneumatic Hole Puncher will give you more cycles per penny. The hardened steel cutter with ground razor sharp edges is an integral part of the cylinder. A small air jet ejects the slugs from the cutter preventing slug build up, and Elastomer Bumpers insure Cushion Quiet operation. Less than " in diameter, several cylinders can be closely mounted. Available in seven hole cutter sizes from 4" to 5 8". This stainless steel body, single acting spring return cylinder has a 3 4" bore and " stroke. A nickel plated steel rod guide is threaded for easy nose mounting, and a 8" NPT air inlet is conveniently located in the rear head. Prelubricated with HT-99, the cylinder can be operated with ordinary shop air at pressures up to 250 psi. MODEL NO. HOLE SIZE A B C D E F G H PRICE D-840-A Base Weight:.8 D-9846-A* Base Weight:.9 D-8-A Base Weight:.20 D-68-A Base Weight:.2 D-998-A Base Weight:.23 D-999-A Base Weight:.24 D-207-A Base Weight:.29 D-208-A Base Weight:.29 /4".250" / $3.50 N/A N/A / /6".32" / $ /8".375" / /6".438" 5/ $45.30 /2".500" 5/ /6".562" 3/ $ /8".625" 3/ * The Pneumatic Hole Puncher Cylinder may be ordered without the cutter under model number D-9846-A. This cylinder has the same features and dimensions as the Hole Puncher except 4-28 UNF-2A by 0.50 long rod threads are provided so you may attach your own cutter..22