PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
|
|
|
- Elvin Marshall
- 5 years ago
- Views:
Transcription
1 PNUMTI RK N PINION TUTORS dvanced torque to size ratio
2 eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with industry standards for interface with ISO 11, NMUR and VI/V 8 ctuated valves are available factory assembled or seperately, actuator and mounting kits luminum actuators are available as standard, Stainless Steel and lectric actuators are available upon request Limit switches, proximity sensors, position indicators, pilot valves and other accessories are available upon request Standard Temperature range: - to 90 (-.6 to 19 ) Optional: igh Temperature: -0 to 10 (- to 8 ) Low Temperature: -0 to 80 (-8 to 176 ) eneral our standard actuator sizes are available upon request: Mini (designator 1 ), Small (designator ) and 180 actuator (designator T ), Medium (designator ), and Large (designator ). Improved operational speed enables better valve opening and closing control. TX certification of Valves-ctuators assemblies is available on request at the time of order quotation. 80 PNUMTI RK N PINION TUTORS
3 Material of onstruction No. -00 IS IS -800 IS Part Qty. Material Part Qty. Material Part Qty. Material 1 ctuator 1 l 6-T ctuator 1 l 6-T ctuator 1 l 6-T oupling 1 St.St.16 oupling 1 St.St.16 oupling 1 St.St.16 racket 1 St.St.0 racket 1 St.St.0 racket 1 St.St.0 Washer flat St.St.0 Washer flat St.St.0 Washer flat St.St.0 Washer spring 8 St.St.0 Washer spring St.St.0 Washer spring St.St.0 6 Screw 8 St.St.0 Screw St.St.0 Screw St.St St.St.16 Panel nut 1 St.St.16 Panel nut 1 St.St St.St St.St.16 M-LT VN ONTROL TNOLOY 81
4 -6800 IS igh Performance all Valves features, materials of construction, and technical data are available in the valves section. Selection of Valve-ctuator assemblies provided herein is based on: Valve maximum allowable working pressure mbient temperature (0 to 100 /10 to 7 ) ctuator fits to valve based on operating pressure of 6 bar, as per table. To order ball valve factory assembled with an actuator, add the actuator designator to the valve part number / description per the below table. or example: SS-L-1/-PSS with standard ouble cting luminum ctuator SS-L-1/-PS-1 To order an actuator and mounting kit for field assembly: ouble acting ctuator ordering number: Z-1 orresponding mounting kit: Z-6800-MK-1/ Table 1 Series nds Size Seats Minimum ctuator Operating Pressure ar (Psi) T-type 1/16 -/8 (mm-10mm) 1/ -/ (1mm18mm) TM 1600 PT PK ctuator esignators (actory assembled) Spring Return NO N ouble cting ctuator Ordering ode Spring Return ouble cting Mounting Kit Ordering Info (7.) 1O 1 1 Z-1S Z-1 Z-6800-MK-1/ TM 1600 (7.) 1O 1 1 Z-1S Z-1 Z-6800-MK-1/ PT PK 1/16 -/8 (mm-10mm) TM / -/ (1mm-18mm) PT PK (7.) O Z-S Z- Z-6800-MK-1/ (7.) TS TS T Z-TS Z-T Z-6800-MK- 1/ Z-6800-MK-1/ am-let ISO 11 mounting kits for Series contain: Mounting Kit ordering Information describes interface per ISO 11. for example: Z-6800-MK-1/-0-0 complies with: ISO 11 flange types 0-0 Part Qty Material oupling 1 St.St 16 racket 1 St.St 0 Screw St.St 0 Washer spring St.St 0 Washer flat St.St 0 Panel nut 1 St.St 16 Mounting instructions 1 - Please contact your local representative for ordering information on Lubricant ree ctuated Valves 8 PNUMTI RK N PINION TUTORS
5 -800 IS -800 One Piece all Valves features, materials of construction, and technical data, are available in the -800 valves section. Selection of Valve-ctuator assemblies provided herein is based on: Valve maximum allowable working pressure mbient temperature (0 to 100 / 10 to 7 ) ctuator fits to valve based on operating pressure of 6 bar, as per table. To order -800 ball valve factory assembled with an actuator, the actuator designator shall be added to the valve part number / description per the below table. or example: -800S-SS-L-1/ with standard Spring Return luminum ctuator Normally losed -800S-SS-L-1/-1 To order an actuator and mounting bracket kit for field assembly: Spring Return ctuator ordering number: Z-1S orresponding mounting bracket kit: Z-800S-MK Table Series T-Type nds Size S Seats Minimum ctuator Operating Pressure ar (Psi) ctuator esignators (actory ssembled) Spring Return NO N ouble cting ctuator Ordering ode Spring Return ouble cting Mounting Kit Ordering info M P (7.) 1O 1 1 Z-1S Z-1 Z-800M-MK L O Z-S : Z-800L-MK-0-0- : Z-800L-MK S M L 1O 1 Z-1S P (7.) TS TS T Z-TS Z-T Z-800S-MK Z-800S-MK-0-0- Z-800M-MK-0-0- Z-800L-MK-0-0- am-let ISO 11 mounting kits for Series contain: Mounting Kit ordering Information describes interface per ISO 11. for example: Z-6800-MK-1/-0-0 complies with: ISO 11 flange types 0-0 Part Qty Material oupling 1 St.St 16 racket 1 St.St 0 Screw St.St 0 Washer spring St.St 0 Washer flat St.St 0 Panel nut 1 St.St 16 Mounting instructions 1 - Please contact your local representative for ordering information on Lubricant ree ctuated Valves M-LT VN ONTROL TNOLOY 8
6 -00 IS -00 Three Piece all Valves features, materials of construction, and technical data, are available in the -00 valves section. Selection of Valve-ctuator assemblies provided herein is based on: Valve maximum allowable working pressure mbient temperature (0 to 100 / 10 to 7 ) ctuator fits to valve based on operating pressure of 6 bar, as per table. To order -00 ball valve factory assembled with an actuator, the actuator designator shall be added to the valve part number/description per the below table. or example: -00-SS-L-/-T with standard ouble cting luminum ctuator -00-SS-L-/-T- To order an actuator and mounting kit for field assembly: Spring Return ctuator ordering number: Z- orresponding mounting kit: Z-00-MK-/ Please contact your local representative for ordering information on Lubricant ree ctuated Valves Table Series nds Size Seats Minimum ctuator Operating Pressure ar (Psi) ctuator esignators (actory ssembled) Spring Return ouble cting ctuator Ordering ode Spring Return ouble cting Mounting Kit Ordering Info -00S 1/, /8 (6 mm, 10 mm) NO N TM 1600 (7.) 1O 1 1 Z-1S Z-1 Z-00-MK-1/ PT TM 1600 (7.) O 1 Z-S Z-1 : Z-00-MK-1/ : Z-00-MK-1/ / -1/ (6 mm-1 mm) St.St. PT (7.) O Z-S Z- Z-00-MK-1/ PK (7.) O Z-S Z- : Z-00-MK-1/ : Z-00-MK-1/ / (0 mm) PT TM 1600 (7.) O Z-S Z- Z-00-MK-/ St.St. PT (7.) O Z-S Z- : Z-00-MK-/ : Z-00-MK-/ ( mm) PK (7.) O Z-S Z- Z-00-MK-/ PT TM 1600 St.St. PT (7.) O Z-S Z- : Z-00-MK : Z-00-MK PK (7.) O Z-S Z- Z-00-MK am-let ISO 11 mounting kits for -00 Series contain: Part Qty Material Note: Mounting Kit oupling 1 St.St 16 ordering Information racket 1 St.St 0 describes interface per Screw 8 St.St 0 ISO 11. or example: Z-00-MK-/-0-0 Washer spring 8 St.St 0 complies with: ISO 11 Washer flat St.St 0 flange types 0-0 Panel nut 1 St.St 16 Mounting instructions 1-8 PNUMTI RK N PINION TUTORS
7 imensions for ssembled ctuators & way Valve Series 1 L Ø 8 M J K Series ody esignator 1/ 1/ S M L nds Size 1/16 -/ 8 (mm-10mm) 1/ -/ (1mm-18mm) 1/16-1/ (mm-6mm) 1/ -/8 (6mm-8mm) /8-1/ (10mm-1mm) Seats Material TM 1600 PT PK TM 1600 PT PK P ctuator Model 1S 1 1S 1 S 1S 1 1S 1 S 1 Units 1 J K L M mm inch mm inch mm inch mm inch mm x inch x mm x inch x mm inch mm inch mm inch mm inch mm x inch x mm inch M-LT VN ONTROL TNOLOY 8
8 imensions for ssembled ctuators IS 1 L Ø 8 J K Series ody esignator nds Size Seats Material ctuator Model Units 1 J K L -00S -00 1/ 1/ / 1/,/8 (6mm, 10mm) 1/ -1/ (6mm- 1mm) / (18mm) TM 1600 PT TM 1600 St.St. PT PK PT TM 1600 St.St. PT PK 1S 1 S 1 S S S S 1 S S mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch PNUMTI RK N PINION TUTORS
9 imensions for ssembled ctuators IS (ont d ) 1 L Ø 8 J K Series ody esignator nds Size Seats Material ctuator Model Units 1 J K L (mm) PT TM 1600 St.St. PT PK S S 1 S S mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch M-LT VN ONTROL TNOLOY 87
10 imensions for ssembled 180 ctuators T-TYP & T-TYP IS 1 L OUTLT Ø 8 OUTLT INLT J K Series ody esignator nds Size Seats Material ctuator Model Units 1 J K L T-type -800 T-type 1/ 1/16 -/ 8 (mm-10mm) 1/ 1/ -/ (1mm-18mm) S M L 1/16-1/ (mm-6mm) 1/ -/8 (6mm-8mm) /8-1/ (10mm-1mm) TM 1600 PT PK TM 1600 P ST T ST T ST T ST T ST T mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch PNUMTI RK N PINION TUTORS
11 luminum Pneumatic ctuator - Technical ata 1S: ISSSMLY SPRIN RTURN No. escription Qty Material 1: OUL TIN 1 ap allen screw 8 ISI-0 stainless steel ouble acting cap luminum alloy ()+() ap O-ring N..R Piston 1 Polyarilamide ylinder 1 luminum alloy ()+(1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Stainless steel 8 Position indicator 1 Polyacetal 9 Plate O-ring N..R. 10 uide ring 1 Polyacetal + mb 11 Piston O-ring 1 N..R. 1 Shaft O-ring 1 N..R. 1 Shaft O-ring 1 N..R. 1 Preloaded springs 6 IN-17-c () () 1 Spring return cap 1 luminum alloy () + () 16 Shaft 1 Polyamide + S.S.Insert 17 rive adapter 1 ISI-16 stainless steel 18 Spring return cap washer ISI-0 stainless steel 19 Nut ISI-0 stainless steel 0 Pneumatic connection plate 1 Polyamide + 1 Plate allen screw ISI-0 stainless steel Watertightness plane gasket 1 N..R overed with polyamide.. overed by cataphoresis.. Variable quantity, please see the Spring return torque chart.. Trivalent chrominium passivation.. Polyurethane M-LT VN ONTROL TNOLOY 89
12 ycle time in (sec) Weight apacity in litres Model To open To close Kg. Lb. To open To close 1 0,1 0,1 0,6 1. 0,07 0,0 1S 0,1 0, ,07 ycle time w/o resistant torque at 6 bar. imensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. *or Spring Return ctuator: = 96.mm (.8 inch) or ouble cting ctuator: = 76.8mm (.0 inch) OUL TIN TORQUS 1 ir pressure ar, PSI, 8 7, 79, , 116 Nm Lb.in SPRIN RTURN TORQUS ir torque at indicated pressure Spring 1S, bar Torques, 8 7, 79, , 116 p.s.i N Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd 6* Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in N: Number of springs per side * Standard number of springs 90 PNUMTI RK N PINION TUTORS
13 luminum Pneumatic ctuator - Technical ata : OUL TIN S: SPRIN RTURN ISSSMLY No. escription QTY Material 1 ap allen screw 8 ISI-0 stainless steel ouble acting cap luminum alloy ()+() ap O-ring N..R Piston Polyarilamide ylinder 1 luminum alloy ()+(1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Stainless steel 8 Position indicator 1 Polyacetal 9 Plate O-ring N..R. 10 uide ring Polyacetal + mb 11 Piston O-ring N..R. 1 Shaft O-ring N..R. 1 Shaft O-ring N..R. 1 Preloaded springs 1 IN-17-c () () 1 ase plate (iso-11) 1 Polyamide + 16 Shaft 1 Polyamide + S.S.Insert 17 rive adapter 1 ISI-16 stainless steel 18 ap washer 8 ISI-0 stainless steel 19 llen screw ISI-0 stainless steel 0 Nut ISI-0 stainless steel 1 Nut ISI-0 stainless steel Pneumatic connection plate 1 Polyamide + Plate allen screw ISI-0 stainless steel Spring returen cap luminum alloy ()+() overed with polyamide.. overed by cataphoresis.. Variable quantity, please see the Spring return torque chart.. Trivalent chromium passivation.. Polyurethane M-LT VN ONTROL TNOLOY 91
14 Model ycle time in (sec) Weight apacity in litres To open To close Kg. Lb. To open To close 0,1 0,1 0,9,0 0,07 0,11 S 0,1 0,1 1,0 0,07 ycle time w/o resistant torque at 6 bar. imensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. *or Spring Return ctuator: = 10.mm (. inch) or ouble cting ctuator: = 101mm (.97 inch) OUL TIN TORQUS ir pressure ar, PSI, 8 7, 79, , 116 Nm 7,9 11, 1,1 1, 17 19,8,9 Lb.in 69, 100 1,8 17, 10, 17, 0,7 SPRIN RTURN TORQUS ir torque at indicated pressure Spring S, bar Torques, 8 7, 79, , 116 p.s.i N Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd 6* 10 6,7 7,,1 8,8, 10, 7 1,1 9,8 16, 1,9 Nm 88, 9, 6, 6, 77,9 8,7 91, 6 11,9 86,7 1, 11, Lb.in 8,,8,,8 8,,6 9,7 7 11, 8, 1 11, 17,1 1, Nm 7, 1, 8,7,8 7, 9,6 8,9 6 99,1 7, 1, , 17, Lb.in 7,6, 0,9 6,7, 9, 7,1 10,9 8, 1, 10 1, 1,8 18, 1,9 Nm 6 0,7 9, 8 9, 8,1 8,1 6,8 96, 7, 109,7 88, 1, 11, 16 10,7 Lb.in,,6,, 7,7,8 10, 8,6 11,9 10 1, 11, 16, 1, Nm 8,7 1,9 8,1 1, 68, 1, 9,9 76,1 10, 88, 118,6 101,8 1, 16,6 Lb.in,,,9 8,9 7, 11,7 10,1 1,1 11, 1,6 1 Nm, 1, 8,7, 78,8 6,6 10,6 89, 11,9 101,8 19, 11,1 Lb.in N: Number of springs per side * Standard number of springs 9 PNUMTI RK N PINION TUTORS
15 luminum Pneumatic ctuator - Technical ata : OUL TIN S: SPRIN RTURN ISSSMLY No. escription Qty Material 1 ap allen screw 8 ISI-0 stainless steel ap luminum alloy () + (6) ap-o-ring N..R. Piston luminum alloy () ylinder 1 luminum alloy () + (1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Steel () 8 Position indicator 1 Polyamide 9 Piston guide Polyacetal 10 uide ring Polyacetal 11 Piston O-ring N..R. 1 Shaft O-ring N..R. 1 Shaft O-ring N..R. 1 Preloaded springs 1 IN-17-c () () 1 ase plate (iso-11) 1 Polyamide + 16 Shaft 1 Steel () 17 am 1 Steel () 18 ap washer 8 ISI-0 stainless steel 19 llen screw ISI-0 stainless steel 0 Nut ISI-0 stainless steel 1 Plate O-ring N..R Nut ISI-0 stainless steel Pneumatic connection plate 1 Polyamide + Plate allen screw ISI-0 stainless steel xagonal screw ISI-0 stainless steel 6 Nut ISI-0 stainless steel 7 ushing ISI-0 stainless steel 8 O-ring N..R overed with polyamide.. overed by cataphoresis.. overed by nickel - PT.. Variable quantity, please see the Spring return torque chart.. Trivalent chromium passivation. 6. overed with polyurethane M-LT VN ONTROL TNOLOY 19 9
16 ycle time in (sec) Weight apacity in litres Model To open To close Kg. Lb. To open To close 0,1 0, ,1 0,18 S 0, 0, ,1 ycle time w/o resistant torque at 6 bar. imensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. OUL TIN TORQUS 9 ir pressure ar, PSI, 8 7, 79, , 116 Nm Lb.in SPRIN RTURN TORQUS ir torque at indicated pressure Spring S, bar Torques, 8 7, 79, , 116 p.s.i N Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd 6* 16, 11,1 9, 11,6 6, 1,9 8, 18, 1,8 17, 17,Nm 16 98, 8,, 10,7,9 1 7, 16,9 11,1 01,8 1 Lb.in 1,8 9, 6,7, 11,1 6,7 1, 8,9 1,6 11, 0,1 1,7, 0,1 Nm 1,1 8, 9, 0, 98, 9, 117,7 78,8 18,1 99,1 177, ,8 177,9 Lb.in 11,1 7,6 8, 1,9 9, 1,1 11,6 17, 1,9 1,9 18, 6,,8 Nm 98, 67, 7,, 11, 8, 1,6 10, ,9 16,9,8 01,8 Lb.in 8,,8,8,1 10, 7,6 1,7 1 16,9 1, 19, 16,,7 1 Nm 7, 1, 1, 7, 91, 67, 10,1 106, 19,6 1,7 169, ,8 18,9 Lb.in,8,6 8,8 1, 10, 16,9 1,7 19,1 16,9 1, 19, Nm 1, 1,9 70,8 1, 110,6 91, 19,6 10, ,6 189, 169,9 Lb.in N: Number of springs per side * Standard number of springs PNUMTI RK N PINION TUTORS
17 luminum Pneumatic ctuator - Technical ata : OUL TIN S: SPRIN RTURN ISSSMLY No. escription Qty Material 1 ap allen screw 8 ISI-0 stainless steel ap luminum alloy () + (6) ap-o-ring N..R. Piston luminum alloy () ylinder 1 luminum alloy () + (1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Steel () 8 Position indicator 1 Polyamide 9 Piston guide Polyacetal 10 uide ring Polyacetal 11 Piston O-ring N..R. 1 Shaft O-ring N..R. 1 Shaft O-ring N..R. 1 Preloaded springs 1 IN-17-c () () 1 am 1 Steel () 16 Shaft 1 Steel () 17 Plate O-ring N..R. 18 ap washer 8 ISI-0 stainless steel 19 Nut ISI-0 stainless steel 0 Pneumatic connection plate 1 Polyamide + 1 Plate allen screw ISI-0 stainless steel xagonal Screw ISI-0 stainless steel Nut ISI-0 stainless steel ushing ISI-0 stainless steel O-ring N..R. 1. overed with polyamide.. overed by cataphoresis.. overed by nickel - PT. Variable quantity, please see the Spring return torque chart.. Trivalent chromium passivation. 6. overed with polyurethane M-LT VN ONTROL TNOLOY 9
18 Model ycle time in (sec) Weight apacity in litres To open To close Kg. Lb. To open To close 0. 0, ,8 0.7 S 0, 0, ,8 ycle time w/o resistant torque at 6 bar. imensions in mm. M8 00,8 80 To calculate the consumption, multiply the above figures by the real working pressure. M M6 ø 0 17 ø0 0 ø , 90º 0º 101,6 1,8 18, 9, 0 OUL TIN TORQUS ir pressure ar, PSI, 8 7, 79, , 116 Nm Lb.in SPRIN RTURN TORQUS lose SOLNOI NMUR NORM ST TIL ir torque at indicated pressure Spring S, bar Torques, 8 7, 79, , 116 p.s.i N Initial nd Initial nd Initial nd Initial nd Initial 19, Initial nd Initial nd Initial nd 6* Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in N: Number of springs per side * Standard number of springs M 61,7 Open ø1 M6 1 0,6 0,6 96 PNUMTI RK N PINION TUTORS
19 180 Pneumatic ctuator - Technical ata ISSSMLY No. escription Qty Material T: OUL TIN 1 ap screw 8 isi-0 stainless steel uabel acting cap luminium alloy () + () ap o-ring N..R. Piston luminium alloy () ylinder 1 luminium alloy () + (1) 6 Washer 1 Polyamide 6 7 Spring clip 1 Stainless Steel () 8 Position indicator 1 Polyacetal 9 Piston guide Polyacetal 10 uide ring Polyacetal + Mb 11 Piston o-ring N..R. 1 Shaft o-ring N..R. 1 Shaft o-ring N..R. 1 Springs set IN-17-c () () 1 ase plate (ISO-11) 1 Polyamide + 16 Shaft 1 Polyamide + S.S. Insert 17 rive adapter 1 isi-16 stainless steel 18 ap washer 8 isi-0 stainless steel 19 llen screw isi-0 stainless steel 0 Nut isi-0 stainless steel 1 Nut isi-0 stainless steel Pneumatic connection plate 1 Polyamide + Plate allen screw isi-0 stainless steel Plate o-ring N..R Spring return cap luminium alloy () + () ST: SPRIN RTURN (1) overed with polyamide. () overed by ataphoresis. () Variable quantity, please see the Spring return torque chart. () overed with polyurethane M-LT VN ONTROL TNOLOY 97
20 ycle time in (sec) Weight apacity in litres Model To open To close Kg. Lb. To open To close T ST ycle time w/o resistant torque at 6 bar. imensions in mm. To calculate the consumption, multiply the above figures by the real working pressure. 0. (8.0) (SPRIN RTURN) 16. (6.1) (OUL TIN) 80 (.1) 11 (0.) M M M 1. (0.6) 0 (1.18) 17. (0.69) 0 (0.79) Ø 10 (0.9) Shaft detail 6 (1.) 0 (1.6) 0 8 (0.1) ottom view 6.7 (0.6) 0 (0.79) 76.1 (.0) 9 (0.) 8. (1.9) Upper view 7. (1.6) 89. (.) (0.16) Indicator screw (0.16) 1 (0.7) OUL TIN TORQUS T ir pressure ar PSI Nm Lb.in SPRIN RTURN TORQUS ront view (0.9) M 1/" SPP () Open (1.6) 1/" SPP () lose Solenoid NMUR Standard ST Spring Torques ir torque at indicated pressure bar p.s.i N Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd Initial nd * Nm Lb.in Nm Lb.in Nm Lb.in Nm Lb.in N: Number of springs per side * Standard number of springs 98 PNUMTI RK N PINION TUTORS
21 SSORIS KITS Standard 90 degrees. luminum pneumatic actuator, Operating Pressure: max. 8 bar (116 PSI). Standard working temperature - to 90 (-.6 to 19 ) Inductive limit switch for visual and electric indication of actuator position voltage: 8V, nclosure IP67 Solenoid valve, attached to the actuator to create an electro pneumatically actuated ball valve. V,.W / Way for double acting and spring return. nclosure IP6 Option for: 110V, 0Z. Option for: /, / Way. or more information please contact your local representative. lectric actuator has been designed to control valve with 90 deg rotation 1W, IP66. Option 1: 90-0V, 0/60Z, 90-0V, Option : 1-0V, 0/60Z, 1-8V 90 degree Stainless Steel pneumatic actuator, operating pressure max. 8 bar (116 PSI). Standard working temperature - to 90 (-.6 to 19 ) TX mechanical limit switch for use in hazardous locations zone, temp range (-0 to 60 ) (- to 10 ) lectro Mechanical limit switch for visual and electric indication of actuator position. nclosure IP67, voltage: : 0V 16, 1V 16 : 0V 0., 1V 0.6, 0V 10V M-LT VN ONTROL TNOLOY 99
22 Ordering information for actory ssembled ccessories Valve Type 1 T LS SV ctuator Type Temp Range ( ) Limit Switch Type Solenoid Valve Per Tables (1,,) luminum ctuator lank Standatd ctuator lank No Limit Switch lank No Solenoid Valve 6S1 St.St. ctuator* T igh Temperature ctuator LSM lectromechanical Limit Swith SV SV Solenoid Valve (/) 1 1 lectric ctuator* LT Low Temperature ctuator LSI Inductive Limit Switch * Please contact your Local Representative to fit ctuator to Valve. LSMX LSIX lectromechanical Limit Switch TX Inductive Limit Switch TX Mounting Kits for field assembly of Limit Switches: ctuator Type 1 /1S /S /S Mounting Kit escription Z-LS-MK-1 Z-LS-MK- Z-LS-MK- If special cleaning is required, L / O will be added in the end, and will refer to the Valve Only. or example: - 800S-SS - L- 1/ - 1LSM - O In case of request for ctuated valve with LS and Solenoid Valve, The order is as follows: Valve, ctuator, LS, Solenoid or example: - 800S-SS - L- 1/ - 1LSMSV or double mounting actuators, please contact your local representative. Ordering Information for ccessories Kits for field assembly luminum actuators for filed assembly lectro Mechnical Limit Switch Inductive Limit Switch lectro Mechnical / Inductive Limit Switch TX Stainless Steel ctuator* lectric ctuator* Solenoid Valve / Way Option: /, / Way See Tables (1,,) Z - LSM Z - LSI Z - LSMX Z - LSIX Z - 6S1 Z - 1 () Z-1 () Z - SV () Z - SV () * or Stainless Steel ctuator or lectric ctuator Please contact your local representative. Warning! or your safety The system designer and user have the sole responsibility for selecting products suitable for their special application requirements, ensuring their safe and trouble-free installation, operation, and maintenance. pplication details, material compatibility and product ratings should all be considered for each selected product. Improper selection, installation or use of products can cause property damage or personal injury. am-let P catalog Rev_0 July PNUMTI RK N PINION TUTORS
Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT
ir ctuated all Valves 3-Way T-Port Stainless Steel, ull ore 1/4 to 2 SRIS eatures ull Port 3-way T flow path irect mount valve with standard ISO5211 mount 316 stainless steel body, ball and stem ctuators
Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT
ir ctuated 3-Way all Valves -Port rass, Standard Port 1/4 to 3 SERIES eatures Spring Return or ouble cting Standard Port 3-way flow path irect mount brass valve using standard ISO5211 ctuators designed
Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT
ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
Pneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
Richter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
503 Series Solenoid Pilot Actuated Valves
Solenoid Pilot ctuated Valves Offered by: Specialists in Valves, ontrols, Pneumatics, Fluid Measurement Phone: (203) 261-6711 www.okcautomation.com 5 Ported, 2 and 3 position, 4-way, Spool & Sleeve and
Ea series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
New compact powerful maintenance-free
Richter Twin Piston Quarter-turn ctuators New compact powerful maintenance-free ouble-acting quarter-turn actuators series R The actuators are the optimum automation units in technical and commercial terms
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
Cipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
Matic TM. Data sheet Sheet No.: Rev. A EL-O-MATIC ACTUATORS WITH ASCO SOLENOID VALVES Date: November /2 NC 5/2
ata sheet Sheet No.:.06. Rev. -O-MTI TUTORS WITH SO SOLNOI VLVS ate: November 009 Selector plate for / - / function lectrical entry Pg 9 8 ir entry G/" Speed control (optional) 7 Speed control (optional)
MK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
Notes 1 Hard anodised aluminium alloy: AlZnMgCu1.5, DIN 1725/1 2 Deltatone Coating 3 Zinc plated and passivated 4 Stainless Steel AISI 304
Sheet No.: 1.101.30 Rev. ate: January 2012 ONSTRUTION, PRTS N MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. escription Qty. escription Specification Std S.S. Shaft SR 1 ody 1 luminium lloy GlSi10Mg,
Nickel Plated Brass 2-way Full Port Ball Valve FEATURES
-800-899-0553 0 Series Nickel Plated rass -way ull Port all Valve The 0 is a full port, nickel plated brass, NPT threaded end actuated ball valve. t can be equipped with a manual handle or with direct
Poppet Series Compressed Air & Vacuum
Poppet Series ompressed ir & Vacuum www.asco.com Table of ontents Poppet eatures and enefits ow to Order N Series - ompressed ir Valve Solenoid ir Pilot ctuated /8" to /8" Technical ata /8" to /8" imensions
Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
FEATURES. Full port for unrestricted flow. Blow-out proof stem. Integrated mounting pad for actuators. PORT ARRANGEMENTS MATERIALS OF CONSTRUCTION
-800-899-0553 33 Series Stainless Steel 3-way ull Port all Valve The 33 is a full port, 3-way, 36 stainless steel, NPT threaded end multi port ball valve. t can be equipped with a manual handle or with
N Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D
Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information
MULTI-PORT MONOBLOCK VALVE HMB & 2BE SERIES
MULTI-PORT MONOLOK VLV M & 2 SRIS IPRM MONOLOK VLV OR US & UROP MRKT M SRIS MTRILS O ONSTRUTION - WTT PRTS Item No. Parts Material 1 ody SS316L Var or Vim/Var (1) 2 Seat older SS316L Var or Vim/Var (1)
The company 1 Certifications 2
PNEUMATIC ACTUATORS PRISMA MECÁNICA S.L The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 7 Disassembly and materials 9 PA dimensions 11 P dimensions
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.
Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
VNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
Data sheet Sheet No.: A3.101 Rev. A EL-O-MATIC ACTUATOR WITH INTEGRAL SOLENOID VALVES SVN Date: November 2009
Sheet No.: 3.101 Rev. EL-O-MTI TUTOR WITH INTEGRL SOLENOI VLVES SVN F E G The El-O-Matic "SVN" Series solenoid valve mounts directly to the actuator air inlet manifold eliminating the need for tubing or
501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities
501 Series irectional ontrol Valve Platform Featuring Higher Flow in a ompact Valve Package ommissioning apabilities Solenoid air pilot actuated Low wattage.8 wall for application solenoids Polarity insensitive
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION
VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including
Butterfly Valve Assemblies. Selection Guide. Butterfly Valve Assemblies
Selection uide PRODUT DSRIPTION Schneider lectric s butterfl y valve line offers a wide range of two- and three-way sizes, along with low pressure pneumatic spring return, electric nonspring return, and
Pneumatic Actuators. Series 79P (Aluminum) Series 79P (Glass-filled Polyamide) Series 79P (316 Stainless Steel)
Series 79P (Aluminum) Pneumatic Actuators Specifications Series 79 P: Type: Double Piston, Double Rack and Pinion Bodies: Aluminum, Glass-filled Polyamide, and 316 ss Torque: 59 to 40,710 in-lbs. s Air-to-Air
Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.
Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal
pneumatic actuators
www.prisma.es pneumatic actuators GRA 201610 MECÁNICA S.L PRISMA The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 6 Disassembly and materials 7 PAW-PA30
4. Pinion (Drive Shaft)
210 Series Pneumatic ctuators Technical Features of PROVL Pneumatic ctuators PROVL 210 Series actuators are designed to meet the demanding needs of todays process flow control requirements. Proval actuators
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in.
Keystone Pneumatic Pneumatic ctuator ctuator Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. Features and enefits Compact rack and pinion design utilizes
Viking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
BVA300 Series Pneumatic Actuators for use with Spirax Sarco Ball Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PL Series igh Performance Lug Style utterfly Valve The PL is a high performance lug style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range of
PVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59
Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &
Quick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
Polypropylene Lug and Wafer Style Butterfly Valve FEATURES MATERIALS OF CONSTRUCTION
180089903 Series Polypropylene Lug and Wafer Style utterfly Valve Lug Style Valve Installs between flanges. olts are threaded into tapped holes from each side of mounting flange. Valve Pressure / Temperature
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PW Series igh Performance Wafer Style utterfly Valve The PW is a high performance wafer style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range
Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
3/2 ^ % Features. Construction. Electrical
4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing
1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
Isys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
FEATURES MATERIALS OF CONSTRUCTION. Seats and Seals: EPDM. Disc and Body: PVC.
1800899055 Series PV Wafer Style utterfly Valve Wafer Style Valve Installs between flanges. olts span the body. Valve Pressure / Temperature 50 / to 00 Series butterfly valves incorporate many features
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical
Pilot Operated Stainless Steel Spool Valves xplosionproof Solenoid Valves 6 Stainless Steel odies /4" NPT / / SRIS 6/6 eatures Ideal for valve automation for the oil and gas market Reliable, robust design
26 Series assuredautomation.com. Stainless Steel 2-way Full Port Ball Valve (Cutaway View) PARTS & FEATURES
6 Series Stainless Steel -way ull Port all Valve The 6 is a full port, 36 stainless steel, NPT threaded end automated ball valve. t can be equipped with a manual handle or with direct mount pneumatic or
FEATURES TYPICAL APPLICATIONS. Vacuum and gaseous applications. Liquid, gelatinous and highly viscous media. High cycle applications.
VX Series High Pressure 2-way/3-way oaxial Valve High pressure coaxial valves are the best choice in process and fluid control and combine performance, economy and availability. FTURS i-directional compact
B352, 3-Way, Characterized Control Valve Stainless Steel Ball and Stem
352, 3-Way, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils.
Solenoid Pilot Actuated Valves
Solenoid Pilot ctuated Valves 02 Series irectional ontrol Valve www.asco.com Table of ontents 02 Series Features and enefits Performance ata How to Order Sandwich Option Kit 9 Speed ontrol Kit 9 Shut
PP Series Pneumatic Actuators
PDF Published February 4, 07 PP Series Pneumatic Actuators for Chemline ball valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL PRESSURE: 40 to 0 psi OUTPUT TORQUES:
Cipriani Harrison Valves Corp.
Shutoff & Divert Valve pplication Shutoff and divert valves are used in process flow systems for stopping or diverting the flow of liquid. variety of body configurations allows flexibility in designing
ISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
PP Series Pneumatic Actuators
PDF Published September 9, 0 PP Series Pneumatic Actuators for Chemline ball valves up to 6 for Chemline butterfly valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL
Valvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
VG2000 Series Cast Iron Flanged Globe Valves
Installation Instructions VG2000 Issue ate November 15, 2002 VG2000 Series ast Iron Flanged Globe Valves pplication VG2000 Series ast Iron Flanged Globe Valves are primarily designed to regulate the flow
Valve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
A robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir.
VI F79N Namur Solenoid Valve robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79 and Premiir. Features ompact design with standardized market proven NMR mounting
Rotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180,
G V* H FH HP S2 H/ LH LHG HL/ HLG/ G HL HM G S *H H2 L2 N/ S/F Specifications escriptions Size ffective torque Note 1 N m ctuation Working fluid Max. working pressure MPa Min. working pressure Note 2 MPa
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products.
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components have made a significant
Husky 1050e Pumps Electric Double Diaphragm
usky 15e Pumps lectric ouble iaphragm Selector Tool To order a usky 15e, use the online selector tool at www.graco.com/pumpselectors or contact your distributor. NOT: heck the identification plate (I)
4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
1WE40: Economy WOG - Stainless Steel Ball Valve 3-Piece Socket Weld Ends Stainless Steel Full Port Direct Mount Actuation Design
1WE40: Economy - 1000 W - Stainless Steel all Valve 3-Piece Socket Weld Ends Stainless Steel ull Port Direct Mount ctuation Design SNDRD SPEIIINS eneral Description Item # Economy 3-P 1000 W SW ull Port
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
ISO 5211-Compliant Actuators for Swagelok Ball Valves
www.swagelok.com ISO 5211-Compliant s for Swagelok Ball s 40G, 40, 60, and 83 ; and AFS Ball s Pneumatic rack and pinion actuators s meet industry standards for interface: ISO 5211, NAMUR, and VDI/VDE
Valve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
CONSTRUCTION, PARTS AND MATERIALS P-SERIES ACTUATORS
Sheet No.: 1.101.30 Rev. Date: January 2012 ONSTRUTION, PRTS ND MTERILS P-SERIES TUTORS P Parts Materials Executions Nr. Description Qty. Description Specification Std S.S. Shaft SR 1 ody 1 luminum lloy
Single-Seat Valves For the Sanitary Industries
www.swagelok.com Single-Seat s For the Sanitary Industries Stainless steel construction Shutoff, divert, modulating, and specialty valves 1/2 to 4 sizes Kwik-lamp and tube butt weld end connections 3-
ADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
ESR: Spring Return Actuator Spring Return Rack & Pinion Pneumatic Actuator Aluminum Housing
SR: Spring Return Actuator Spring Return Rack & Pinion Pneumatic Actuator Aluminum Housing STANDARD SPIIATIONS General Series SR igure 7901/7951 Standard Working Temperature -22 to +212 Design Parameters
Richter Twin Piston Quarter-turn Actuators RA
Richter Twin Piston Quarter-turn Actuators RA Compact Powerful Maintenance-free ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for
ILG-D Series Cast Iron Housing Declutchable Gear Operators
ILG-D Series Gear Operators The Rotork Gears ILG-D gear operators are designed to provide a means of manually overriding pneumatic valve actuators in power and process applications. These gear operators
ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
B278, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem
28, 2-Way, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils.
BALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
FEATURES TYPICAL APPLICATIONS
STL Series Resilient-Seated Lug Style utterfly Valve The STL is a resilient-seated 125/150, ductile iron, lug style butterfly valve available with either PM or UN-N seats and 316SS disc (other materials
Gate valve control system Series 64
ate valve control system Series ontrol and isolation valve eneral purpose stainless steel valve daptive pressure control with stepper motor or throttling by adjustable 3-position pneumatic actuator ody
Sanitary Clamp, Full Port, 3-way Ball Valves (3-A approved) FEATURES. FLOW PLANS L Port
30 Series Sanitary lamp, ull Port, 3-way all Valves (3- approved) 3- pproved for use in food processing and dairy applications Valve Pressure / Temperature 1000 The ssured utomation 30 Series 3- approved,
DIST. AUTORIZADO. Design Features
IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer
HV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators
RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application
Piston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
PG Series 180º Rotation Pneumatic Actuators
PDF Published April 18, 2016 PG Series 180º Rotation Pneumatic Actuators for Chemline 3-way ball valves up to 4 material: Epoxy and Rilsan coated aluminum SERIES: PGS Spring Return PGD Double Acting control
Center Center Exhaust Pressurized PS-32AS PS-32BS PS-32AD PS-32BD PS-520S PS-520D PS-53CD PS-53ED PS-53PD. Series PS. Function
DIRECTIONL CONTROL VLVES Directional Control Valves PS-SERIES 3/2, 5/2 and 5/3-way Single and double acting control Long lifespan Low energy consumption Standard manual override Wide range of operating
FT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
Mechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
Catalog. Product Catalog. Setting a new standard for: Quality Reliability Value Global Compatibility
atalog Product atalog Setting a new standard for: Quality Reliability Value Global ompatibility Table of ontents 3-20 Valves 3 irect cting Solenoid Valves (M3V) 4-5 3-Way Solenoid Valves (M3V) 6-7 4-Way
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2
FTURS SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / SO/JOUOMTI solenoid valves satisfy all relevant irectives
Air Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. Port size: 1/4 to 1 JIS symbol Specifications Description
ir Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. : 1/4 to 1 JIS symbol Specifications FW4000-W FW8000-W Working fluid ompressed air Max. working pressure MPa 1.0
ELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended