7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H

Transcription

1 " & " ore zcy0 High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For Division Plant Locations See Page II. 65

2 Introducing... Parker Series H " and " ore Heavy Duty High Pressure Hydraulic s New bolt-on gland retainer for ease of maintenance. New Parker exclusive Hi-Load piston is standard. Newly designed cylinder body seal grooves and highstrength tie rods ensure trouble-free performance even in severe applications. Floating cushions with float-check action and positive metal-to-metal seal. Innovations very Parker cylinder is individually tested before it leaves our plant. Parker meets all of your heavy-duty hydraulic cylinder needs: /" 6" bores Series H " " bores Series H S Ports are standard djustable, floating, stepped cushions Unique end seal design eliminates extrusion gap Spanner wrench holes on /" dia. and larger piston rods for easy installation "olt -on" gland retainer simplifies maintenance High strength alloy tie rods made from 5,000 psi minimum yield strength material Parker's exclusive Hi-Load piston is standard with rugged filled PTF seals and bearings Optional Piston ase hardened chrome plated piston rod ast iron ring piston is available as a special modification. For additional information call your local Parker Distributor. 66

3 Series H " & " ore High Pressure Hydraulic s Specifications/ Mountings Standard Specifications Heavy Duty Service NFP specifications and NSI mounting dimension standards Standard onstruction Square Head Tie Rod Design Nominal Pressure 000 PSI Standard Fluid Hydraulic Oil Standard Temperature -0½F. to +65½F. Piston Rod Diameter " through 5 /" Mounting Styles 6 standard styles at various application ratings Strokes vailable in any practical stroke length ushions Optional at either end or both ends of stroke Rod nds Three Standard hoices specials to order If hydraulic operating pressure exceeds 000 PSI, send application data for engineering evaluation and recommendation. In line with our policy of continuing product improvement, specifications in this catalog are subject to change. vailable Mounting Styles Tie Rods xtended Head nd Tie Rods xtended ap nd Tie Rods xtended oth nds Head Rectangular Flange Style T " & " ore, Page 6 Style T " & " ore, Page 6 Style TD " & " ore, Page 6 Style " & " ore, Page (NFP MX) (NFP MX) (NFP MX) (NFP MF) Head Square Flange Head Rectangular ap Rectangular Flange ap Square Flange Style " & " ore, Page Style " & " ore, Page Style H " & " ore, Page 0 Style H " & " ore, Page 0 (NFP MF5) (NFP M5) (NFP MF) (NFP MF6) ap Rectangular Side Lug Side Tapped ap Fixed levis Style HH " & " ore, Page 0 Style " & " ore, Page Style F " & " ore, Page Style " & " ore, Page 6 (NFP M6) (NFP MS) (NFP MS) (NFP MP) Head Trunnion ap Trunnion Intermediate Fixed Trunnion Double Rod s Style D " & " ore, Page Style D " & " ore, Page Style DD " & " ore, Page Style T Shown (NFP MT) (NFP MT) (NFP MT) Most of the above illustrated mounting styles are available in double rod cylinders. See atalog Page 0. NOT: Series H Hydraulic s fully meet N.F.P.. Standards and NSI Standard for Mounting Dimensions for Square Head Industrial Fluidpower s. For Division Plant Locations See Page II. 6

4 Tie Rod Mountings " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s Tie Rods xtended Head nd Style T (NFP Style MX) DD Z + STRO P + STRO Z + STRO R MM R L + STRO Tie Rods xtended ap nd Style T (NFP Style MX) Z + STRO P + STRO Z + STRO R MM DD R L + STRO Tie Rods xtended oth nds Style TD (NFP Style MX) DD Z + STRO P + STRO Z + STRO R MM Rod nd Dimensions see table Thread Style (NFP Style SM) Small Male LF D WRNH FLTS high strength rod end stud is supplied on thread style through " diameter rods and on thread style through /" diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters Thread Style (NFP Style IM) Intermediate Male MM RD D WRNH FLTS R LF MM RD Thread Style 9 (NFP Style SF) Small Female D WRNH FLTS MM RD and style rod ends are recommended on larger diameters. Use style 9 for applications where female rod end threads are required. If rod end is not specified, style will be supplied. On /" rods and above,.55 dia. spanner wrench holes will be provided instead of wrench flats. asic Mounting (T) NFP MXO Not shown is no tie rod extended and can be supplied upon request. L + STRO "Special" Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for or, and LF. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor. 6

5 Series H " & " ore Heavy Duty Hydraulic s Tie Rod Mountings " and " ore Sizes Table nvelope and Mounting Dimensions ore DD NPTF S R / / / - / - / / 0 9 / / S straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge. / / / dd Stroke L P / 5 / 9 / 6 / Table nvelope and Mounting Table Rod Dimensions Dimensions Thread Rod xtensions and Pilot Dimensions dd Stroke Rod Style Style Rod Dia. & Max. ore No. MM D LF RD Z Z (Std.) / - / - /.9 5 / / 5 / / 5/ 5 / 5/ / / / 0 / 5 / - / / / / / / / / 0 / / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / 0 / / / / 6 / / / 6 / / / / / 0 / 5 / / - / - / 5.9 / 6 / / / / / / / 0 / (Std.) / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / 6 / 5 / 5 / / / 5 / / / / / / 6 / / / / 6 / / / 6 / / / / / 6 / / / - / - / 5.9 / 6 / / / / / / / 6 / 5 5 / - / / / / / / / / 6 / For Division Plant Locations See Page II. 69

6 Rectangular Flange and ap Mountings " and " ore Sizes ap Rectangular Flange Mounting Style H (NFP Style MF) For Style H Mount Max. PSI Pull ore Rod ode Size Maximum pressure rating pull application. Series H " & " ore Heavy Duty Hydraulic s ZF + STRO P + STRO XF + STRO UF MM R L + STRO For pressures exceeding those shown use mounting styles H or HH. F TF F HOLS ap Square Flange Mounting Style H (NFP Style MF6) ZF + STRO P + STRO XF + STRO UF MM TF R UF L + STRO F R TF F HOLS ap Rectangular Mounting Style HH (NFP Style M6) P + STRO XF + STRO UF MM R L + STRO TF F HOLS Rod nd Dimensions see table Thread Style (NFP Style SM) Small Male LF D WRNH FLTS high strength rod end stud is supplied on thread style through " diameter rods and on thread style through /" diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters Thread Style (NFP Style IM) Intermediate Male MM RD D WRNH FLTS LF MM RD Thread Style 9 (NFP Style SF) Small Female D WRNH FLTS MM RD and style rod ends are recommended on larger diameters. Use style 9 for applications where female rod end threads are required. If rod end is not specified, style will be supplied. On /" rods and above,.55 dia. spanner wrench holes will be provided instead of wrench flats. "Special" Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for or, and LF. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor. 0

7 Series H " & " ore Heavy Duty Hydraulic s Rectangular Flange and ap Mountings " and " ore Sizes Table nvelope and Mounting Dimensions ore NPTF S F F R TF UF / / 0 /6 / / / 9 / / 5 / 6 / 6.50 / 6 S straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge. 5 / dd Stroke L P / 5 / 9 / 6 / Table nvelope and Mounting Table Rod Dimensions Dimensions Thread Rod xtensions and Pilot Dimensions dd Stroke Rod Style Style Rod Dia. & Max. ore No. MM D LF RD XF ZF (Std.) / - / - /.9 5 / / 5 / / 5/ 5 / 5/ / / 0 / / 5 / - / / / / / / / 0 / / / / - / - /.9 / 5 / / 5/ 5 / 5/ / / 0 / / / / / 6 / / / 6 / / / / 0 / / 5 / / - / - / 5.9 / 6 / / / / / / 0 / / (Std.) / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / / 5 / 5 / / / 5 / / / / / / / / / / 6 / / / 6 / / / / / / / / - / - / 5.9 / 6 / / / / / / / / 5 5 / - / / / / / / / / / For Division Plant Locations See Page II.

8 Rectangular Flange and Head Mountings " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s Head Rectangular Flange Mounting Style (NFP Style MF) For Style Mount Max. PSI Push Rod ode ore Size UF Z + STRO P + STRO Maximum pressure rating push application. R MM TF F HOLS / F L + STRO For pressures exceeding those shown use mounting styles or. Head Square Flange Mounting Style (NFP Style MF5) UF Z + STRO P + STRO UF R TF MM R TF F HOLS F / L + STRO Head Rectangular Mounting Style (NFP Style M5) UF Z + STRO P + STRO R MM L + STRO TF F HOLS Rod nd Dimensions see table Thread Style (NFP Style SM) Small Male LF D WRNH FLTS high strength rod end stud is supplied on thread style through " diameter rods and on thread style through /" diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters Thread Style (NFP Style IM) Intermediate Male MM RD D WRNH FLTS LF MM RD Thread Style 9 (NFP Style SF) Small Female D WRNH FLTS MM RD and style rod ends are recommended on larger diameters. Use style 9 for applications where female rod end threads are required. If rod end is not specified, style will be supplied. On /" rods and above,.55 dia. spanner wrench holes will be provided instead of wrench flats. "Special" Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for or, and LF. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor.

9 Series H " & " ore Heavy Duty Hydraulic s Rectangular Flange and Head Mountings " and " ore Sizes Table nvelope and Mounting Dimensions ore NPTF S F F R TF UF / / 0 /6 / / / 9 / / 5 / 6 / 6.50 / 6 S straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge. 5 / dd Stroke L L P 9 / 0 / / 5 / 9 / 6 / Table nvelope and Mounting Table Rod Dimensions Dimensions Thread Rod xtensions and Pilot Dimensions dd Stroke Rod Style Style Rod Dia. & Max. ore No. MM D LF RD Z (Std.) / - / - /.9 5 / / 5 / / 5/ 5 / 5/ / / / 5 / - / / / / / / / / / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / / / / 6 / / / 6 / / / / / 5 / / - / - / 5.9 / 6 / / / / / / / (Std.) / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / 6 5 / 5 / / / 5 / / / / / / 6 / / / 6 / / / 6 / / / / / 6 / / - / - / 5.9 / 6 / / / / / / / / - / / / / / / / / 6 For Division Plant Locations See Page II.

10 Side Lugs and Side Tapped Mountings " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s Side Lug Mountings Style (NFP Style MS) US Z + STRO P + STRO L + STRO MM ST.005 /.00 SW SW TS SW S HOLS SW SW XS SU SS + STRO SU SW Side Tapped Mounting Style F (NFP Style MS) Z + STRO P + STRO L + STRO MM / TN NT THRD, ND DP TPPD MT. HOLS XT SN + STRO Rod nd Dimensions see table Thread Style (NFP Style SM) Small Male LF D WRNH FLTS high strength rod end stud is supplied on thread style through " diameter rods and on thread style through /" diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters Thread Style (NFP Style IM) Intermediate Male MM RD D WRNH FLTS LF MM RD Thread Style 9 (NFP Style SF) Small Female D WRNH FLTS MM RD and style rod ends are recommended on larger diameters. Use style 9 for applications where female rod end threads are required. If rod end is not specified, style will be supplied. On /" rods and above,.55 dia. spanner wrench holes will be provided instead of wrench flats. "Special" Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for or, and LF. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor.

11 Series H " & " ore Heavy Duty Hydraulic s Side Lugs and Side Tapped Mountings " and " ore Sizes Table nvelope and Mounting Dimensions dd Stroke ore NPTF S NT S ST SU SW TN TS US L P SN SS / 9 / / / 0 / / / 6 / -6 / -6 9 / 6 9 /6 / / / / / / / / / / 5 / 9 / 5 / 6 / 5 / 6 5 / 5 / 6 / S straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge. Upper surface spotfaced for socket head screws. Table nvelope and Mounting Table Rod Dimensions Dimensions Thread Rod xtensions and Pilot Dimensions dd Stroke Rod Style Style Rod Dia. & Max. ore No. MM D LF RD ND XS XT Z (Std.) / - / - /.9 5 / / 5 / / 5/ 5 / 5/ / / 5 / / 6 / / 5 / - / / / / / / / 5 / / 6 / / / / - / - /.9 / 5 / / 5/ 5 / 5/ / / 5 / / 6 / / / / / 6 / / / 6 / / / / 5 / / 6 / / 5 / / - / - / 5.9 / 6 / / / / / / 5 / / 6 / / (Std.) / / - / - /.9 / 5 / / 5/ 5 / 5/ / / 5 / 5 / 6 / / 6 5 / 5 / / / 5 / / / / / 5 / 5 / 6 / / 6 / / / 6 / / / 6 / / / / 5 / 5 / 6 / / 6 / / - / - / 5.9 / 6 / / / / / / 5 / 5 / 6 / / / - / / / / / / / 5 / 5 / 6 / / 6 For Division Plant Locations See Page II. 5

12 Fixed levis Mountings " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s ap Fixed levis Mounting Style (NFP Style MP) Z + STRO P + STRO L + STRO D PIOT PIN HRD HROM PLTD MM MR X + STRO L LR M W W Rod nd Dimensions see table Thread Style (NFP Style SM) Small Male LF D WRNH FLTS high strength rod end stud is supplied on thread style through " diameter rods and on thread style through /" diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters Thread Style (NFP Style IM) Intermediate Male MM RD D WRNH FLTS LF MM RD Thread Style 9 (NFP Style SF) Small Female D WRNH FLTS MM RD and style rod ends are recommended on larger diameters. Use style 9 for applications where female rod end threads are required. If rod end is not specified, style will be supplied. On /" rods and above,.55 dia. spanner wrench holes will be provided instead of wrench flats. "Special" Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for or, and LF. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor. 6

13 Series H " & " ore Heavy Duty Hydraulic s ap Fixed levis Mountings " and " ore Sizes Table nvelope and Mounting Dimensions ore D W NPTF S F L LR M MR R L P.50 / / / 0 / / / / / 6.5 /.00 / 9 / / / 6 / / / /.50 9 / S straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge. Dimension D is pin diameter. dd Stroke 5 / 6 / Table nvelope and Mounting Table Rod Dimensions Dimensions Thread Rod xtensions and Pilot Dimensions dd Stroke Rod Style Style Rod Dia. & Max. ore No. MM D LF RD X Z (Std.) / - / - /.9 5 / / 5 / / 5/ 5 / 5/ / / / 6 / 5 / - / / / / / / / / 6 / / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / 6 / / / / 6 / / / 6 / / / / / 6 / 5 / / - / - / 5.9 / 6 / / / / / / / 6 / (Std.) / / - / - /.9 / 5 / / 5/ 5 / 5/ / / 5 / 5 / 5 / / / 5 / / / / / 5 / / / / 6 / / / 6 / / / / 5 / / / - / - / 5.9 / 6 / / / / / / 5 / 5 5 / - / / / / / / / 5 / For Division Plant Locations See Page II.

14 Trunnion Mountings " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s Head Trunnion Mounting Style D (NFP Style MT) UT R Z + STRO P + STRO L + STRO TD MM TL TL X ap Trunnion Mounting Style D (NFP Style MT) UT R Z + STRO P + STRO L + STRO TD MM TL TL X + STRO Intermediate Fixed Trunnion Mounting Style DD (NFP Style MT) UM Z + STRO P + STRO L + STRO D R UW TD MM Rod nd Dimensions see table Thread Style (NFP Style SM) Small Male LF TL Thread Style (NFP Style IM) Intermediate Male MM RD D WRNH FLTS high strength rod end stud is supplied on thread style through " diameter rods and on thread style through /" diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, style rod ends are recommended through " piston rod diameters D WRNH FLTS TM LF TL MM RD Thread Style 9 (NFP Style SF) Small Female D WRNH FLTS XI MM RD and style rod ends are recommended on larger diameters. Use style 9 for applications where female rod end threads are required. If rod end is not specified, style will be supplied. On /" rods and above,.55 dia. spanner wrench holes will be provided instead of wrench flats. "Special" Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for or, and LF. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor.

15 Series H " & " ore Heavy Duty Hydraulic s Trunnion Mountings " and " ore Sizes Table nvelope and Mounting Dimensions dd Stroke ore D NPTF S F TD TL TM UM UT UW L P / / 9 / / / 0 / / / / 9 / / / 5 / / / / 9 / 5 / 6 / S straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge. Style DD Minimum Stroke /" /" Table Rod Dimensions Table nvelope and Mounting Dimensions Thread Rod xtensions and Pilot Dimensions dd Stroke Rod Style Style Rod Dia. & Max. Min. ore No. MM D LF RD X XI X Z (Std.) / - / - /.9 5 / / 5 / / 5/ 5 / 5/ / 5 / 6 9 / 6 / 9 / / 5 / - / / / / / / 5 / 6 9 / 6 / 9 / / / / - / - /.9 / 5 / / 5/ 5 / 5/ / 5 / 6 9 / 6 / 9 / / / / / 6 / / / 6 / / / 5 / 6 9 / 6 / 9 / / 5 / / - / - / 5.9 / 6 / / / / / 5 / 6 9 / 6 / 9 / / (Std.) / / - / - /.9 / 5 / / 5/ 5 / 5/ / / / 6 / 0 / / 6 5 / 5 / / / 5 / / / / / / 6 / 0 / / 6 / / / 6 / / / 6 / / / / / 6 / 0 / / 6 / / - / - / 5.9 / 6 / / / / / / / 6 / 0 / / / - / / / / / / / / 6 / 0 / / 6 Dimension XI to be specified by customer. For Division Plant Locations See Page II. 9

16 Type Double Rod " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s Double Rod Style ZM + x STRO P + STRO ZL + STRO MM LD + STRO ll dimensions are shown in inches and apply to ode rod sizes only. For alternate rod sizes, determine all envelope dimensions (within LD dim.) as described above and then use appropriate rod end dimensions for proper rod size from single rod cylinder. dd Stroke dd X Stroke Rod Rod Dia. ore No. MM LD ZL SN SS ZM / / 9 / / / 6 5 / 6 / 5 / 6 / Replaces: L Z SN SS On single rod mounting styles: ll Mtg. Styles F ll Mtgs. For additional information call your local Parker Distributor. 0

17 Notes For Division Plant Locations See Page II.

18 ccessories " and " ore Sizes Series H " & " ore Heavy Duty Hydraulic s Female Rod levis R W W +.00 D +.00 ➁ ccessories Parker offers a complete range of cylinder accessories to assure you of greatest versatility in present or future cylinder applications. Rod nd ccessories ccessories offered for the rod end of the cylinder include Rod levis, ye racket, nuckle, levis racket and Pivot Pin. To select the proper part number for any desired accessory, refer to hart below and look opposite the thread size of the rod end as indicated in the first column. The Pivot Pins, ye rackets and levis rackets are listed opposite the thread size which their mating nuckles or levises fit. hart Mating Parts Mating Parts Thread Rod ye levis lignment Size levis racket Pin nuckle racket Pin oupler 5/6- / 6-0 / -0 /-6 / -6 / / / / - / - / - / - / - / - / - / - - / onsult Factory accessory dimensions conform to NFP recommended standard NFP/T.6. R-9, NFP recommended standard fluid power systems cylinder dimensions for accessories for cataloged square head industrial types. Parker adopted this standard in pril, 95. ye rackets or Mounting Plates shipped before this date may have different dimensions and will not necessarily interchange with the NFP standard. For dimensional information on older style ye rackets or Mounting Plates consult Drawing #05 or previous issues of this catalog. ccessory Load apacity The various accessories have been load rated for your convenience. The load capacity in lbs. is the recommended maximum load for that accessory based on a : design factor in tensions. (Pivot Pin is rated in shear.) efore specifying, compare the actual load or the tension (pull) force at maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory. Mounting Plates Mounting Plates for Style (levis mounted) cylinders are offered. To select proper part number for your application, refer to hart, above right. hart Mtg. Plate Series H Part No. ore Size 6995 / " 6996 ", / " 56 / " 699 " 56 5" 56 6" 56 " 565 " Order to fit thread size. nuckle (Female Rod ye) R D D D D THRD FULL THRD THRD Order to fit thread size. levis racket for nuckle FL M F 5 LR R Order to fit nuckle. Mounting Plate or ye racket FL M 5 F LR R. When used to mate with the Rod levis, select from hart.. When used to mount the Style cylinders, select from the Mounting Plate Selection Table. See hart at lower left. Pivot Pin L MR MR DD DI HOLS DD DI HOLS. Pivot Pins are furnished with levis Mounted s as standard.. Pivot Pins are furnished with () Retainer Rings.. Pivot Pins must be ordered as separate item if to be used with nuckles, Rod levises, or levis rackets. W W R W W D R D D ➁ ➁ ➁ ➁ For additional information call your local Parker Distributor.

19 Series H " & " ore Heavy Duty Hydraulic s ccessories " and " ore Sizes D W R Load apacity Lbs. O 5 / 6 / 5/ 6 / / 6 9/ 6 5/ / / / / / / / / / / / / / / Female Rod levis Part Number / / / / 5/ / / / / / 5/ / 5 / / 5 / 6 / 5 / / 5 / 6 / 5 / / / / / / / / / / / / / / / / / 5 / / / 5 / / / / 6 / / / / 6 / / / / 6 / / / / / / / / / 6 / / / 6 / / -6 / -6 / / - / - / - / - / - / - / - / - / - / D R Load apacity Lbs.O D W DD F FL LR M MR R Load apacity Lbs.O 05 / / / 6 / 6 9/ 5/ / / 6 / / 6 / / 5/ / / / / / / / / / / / / / / / / / 5/ / / / / / / / / 6 / / / 6 / / / 5/ / 5 5/ / / 6 / 9/ / / / / 6 / / / / 6 / / / / / / / 6 / / 6 - levis racket for nuckle Part Number 690 / / / / / / / 6 / / / - nuckle Part Number / / / 5 / / / / / / / / - / - / / / / 9/ 9 / / 5 / / / / / / / 6 / / / 6 / 5 / / / / 6 / / / / / / 5 / 6 / 9 / 6 / / 6 / / / - 69 / 5 / 6 / 6 / 9 / / 6 / / / / - 69 / / 5 / 6 / 6 / 9 / / / / / - 5 / / 6 5 / / 6 6 / 6 5 / / / / / / - 5 / 9 / / 5 / 6-5 / / 6 / 5 / 6 / 6 5 / / / 9 / 5 5 / 6 / / 6 / 5 / 6 / 6 5 / / D DD F FL LR M MR R Load apacity Lbs.O 0 5/ 6 5/ 6 / 6 / / 5/ / / / / / / / / / / 9/ / / / / 5/ / / / / ye racket and Mounting Plate Part Number 56 / / / / / / / / / 5 / / / 5 / / / 9/ 6 / / / / / / / / 6 / / / / / / 6 / / / / / 6 9 / 5 / / / / / / 6 5 / / 6 5 / 6 / / / / 6 / 5 / 6 6 / 6 / 5 / Pivot Pin Part Number D / 6 / / / / / / L 5 / 6 / 5 / / / 5 / 6 5 / 6 5 / 6 6 / 6 6 / 6 / / 5 / 9 Shear apacity Lbs.O accessory dimensions conform to NFP recommended standard NFP/T.6. R-9, NFP recommended standard fluid power systems cylinder dimensions for accessories for cataloged square head industrial types. Parker adopted this standard in pril, 95. ye rackets or Mounting Plates shipped before this date may have different dimensions and will not necessarily interchange with the NFP standard. For dimensional information on older style ye rackets or Mounting Plates consult Drawing #05 or previous issues of this catalog. O See ccessory Load apacity note on previous page. These sizes supplied with cotter pins. Includes Pivot Pin. onsult appropriate cylinder rod end dimensions for compatibility. For Division Plant Locations See Page II.

20 How to Order " and " ore Sizes/ Service Policy Note: Duplicate cylinders can be ordered by giving the SRIL NUMR from the nameplate of the original cylinder. Factory records supply a quick positive identification. ore Size: Specify bore in inches. Mounting Style: Specify your choice of mounting style as shown and dimensions in this catalog. If double rod is wanted, specify with double rod. Series Designation (H) Length of Stroke Piston Rod Diameter: Series H " & " ore Heavy Duty Hydraulic s How to Order Series H s Data Required on ll Orders When ordering Series H cylinders, be sure to specify each of the following requirements: all out rod diameter or rod code number. In Series H cylinders, standard rod diameters (ode No. ) will be furnished if not otherwise specified, unless length of stroke makes the application questionable. Piston Rod nd Thread Style: ushions (If required): Hi-Load Piston or lternate ast Iron Rings: Ports: Fluid Medium: dditional Data: all out thread style number or specify dimensions. Thread style number will be furnished if not otherwise specified. Specify ushion-head end, ushion-cap end or ushion-both ends as required. If cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned. Hi-Load Pistons are furnished as standard. Parker recommends S Straight Thread Ports on Series H " and " bore. Series H hydraulic cylinders are equipped with seals for use with hydraulic oil. If other than hydraulic oil will be used, specify class of fluid (see atalog section ). dditional data is required on orders for cylinders with special modifications. For further information, consult factory. lass Seals lass seals are the seals provided as standard in a cylinder assembly unless otherwise specified. For further information on fluid compatibility on operating limitations of all compounds, see section. For the H series cylinders the following make-up lass Seals: Primary Piston Rod Seal nhanced Polyurethane Service Policy On cylinders returned to the factory for repairs, it is standard policy for the Division to make such part replacements as will put the cylinder in as good as new condition. Should the condition of the returned cylinder be such that expenses for repair would exceed the costs of a new one, you will be notified. ddress all correspondence and make shipments to, Service Department at your nearest regional plant listed on page I. Piston Rod Wiper Nitrile Piston Seals Hi-Load. Filled PTF seals with a nitrile expander Option ast Iron Rings O-Rings Nitrile (nitrile back-up washer when used) ertified Dimensions Parker Division guarantees that all cylinders ordered from this catalog will be built to dimensions shown. ll dimensions are certified to be correct, and thus it is not necessary to request certified drawings. Warranty Seller warrants the goods sold hereunder to be free from defects in material and workmanship. This warranty shall terminate eighteen months after date of shipment form Seller s plant and claims not made in writing within such period are waived. The above warranty does not extend to goods damaged after date of shipment from Seller s plant where the damage is not directly due to a defect in material or workmanship, nor does it apply to goods altered or repaired by anyone other than Seller s authorized employees, nor to goods furnished by uyer or acquired at uyer s request and/or to uyer s specifications. If the goods are in accordance with or in reference to an engineering drawing specified by or furnished to the customer, the specifications and information on the drawing shall be applicable in determining such correct use, operation and application. When claiming a breach of warranty, uyer must notify Seller promptly whereupon Seller will either examine the goods at their site, or issue shipping instructions for return to Seller (transportation costs prepaid by uyer). When any goods sold hereunder are proved as not warranted, Seller s sole obligation under this warranty shall be to repair or replace the goods, at its option, without charge to uyer. The above warranty comprises Seller s sole and entire warranty obligation and liability to uyer, its customers and assigns in connection with goods sold hereunder. ll other warranties, express or implied, including but not limited to, warranties of merchantability and fitness, are expressly excluded. For additional information call your local Parker Distributor.

21 Series H " & " ore Heavy Duty Hydraulic s Model Numbers " and " ore Sizes Series H Model Numbers How to Develop Them How to Decode Them Parker Series H cylinders can be completely and accurately described by a model number consisting of coded symbols. For single rod cylinders a maximum of places for digits and letters are used in a prescribed sequence to produce a model number. Only nine places are needed to completely describe a standard non-cushioned Series Feature Description Page No. Symbol ore Specify in inches ushion-head Used only if cushion required 6, 9 Double-Rod Used only if double-rod cylinder is required 0 Mounting Style Head Tie Rods xtended ap Tie Rods xtended 6 6 T T oth Tie Rods xtended 6 TD Head Rectangular Flange Head Square Flange Head Rectangular ap Rectangular Flange 0 H ap Square Flange 0 H ap Rectangular 0 HH Side Lugs Side Tapped F ap Fixed levis 6 Head Trunnion D ap Trunnion D Intermediate Fixed Trunnion DD H cylinder. To develop a model number, select only those symbols that represent the cylinder required, and place them in the sequence indicated below. Note: Page numbers with a letter prefix, ie:, are located in section of this catalog. " F P T H T S " Mounting Modifications ombination Mounting Style Series Piston Ports ommon Modifications Special Modifications Piston Rod Number Piston Rod nd Piston Rod lternate Threads Piston Rod Threads ushion-ap Stroke Used only for Thrust ey (Styles,F,, & ) Used only for Manifold Port O-Ring Seal (Style ) ny Practical Mounting Style Listed bove Used in all H Model Numbers Hi-Load Piston standard Used only for Ring Packed Piston Used only for Lipseal Piston S Straight Thread O-Ring Port (Standard) Used only for NPTF (Dry Seal Pipe Thread) Used only for SP (Parallel Thread ISO ) Used only for S Flange Ports (000 psi) Used only for SPT (Taper Thread) Used only for Metric Thread Used only for Metric Thread per ISO 69 High Water ontent Fluid Nut Retained Piston iton Seals Water Service PR Seals Used only if special Modifications are required: Oversize Ports Port Position hange Special Seals Stop Tube Stroke djuster Ring Type Piston For Single Rod s, select one only. Refer to Rod number listing, Table, Pages 6 through See chart in Section, page for minimum piston rod diameter Select: Style Small Male Style Intermediate Male Style 9 Short Female Style Special (Specify) Used only for male thread two times longer than standard. UNF Standard SF (ritish Fine) Metric Used only if cushion required Specify in inches Required for asic Model Number Dark rrows Indicate asic Minimum Model Number 9 9 6, , 9 9 P M s listed above H L T U R P F W X S W M Use Symbol S to designate special Modification except piston rod end Styles,, and 9 are catalog standards Specify Style for any special piston rod end s with these mounting styles should have a stroke length equal to or greater than their bore diameters. Double Rod s For double rod cylinders, specify rod number and rod end symbols for both piston rods. typical double rod model number would be: 6" -HU/X" For Division Plant Locations See Page II. 5

22 Parker TS-000 seal designed to eliminate cylinder rod seal leakage. Parker Series H Heavy Duty and Series L Medium Duty Hydraulic s with the TS-000 seal offers positive protection against cylinder rod leakage under the most demanding applications. The TS-000 seal is the product of countless hours of research, development and extensive field testing and is only available on Parker s. ased on the popular Parker Serrated Lipseal rod design, the TS-000 incorporates the pressurecompensated, uni-directional characteristics of a U-cup with the multiple edge sealing effectiveness of compression-type stacked-packings. The goal for the Parker team was to design a rod seal suitable for all types of applications, regardless of pressure profile. It had to be composed of a ewel gland with wiperseal and TS-000 cylinder rod seal. material that would not react chemically with hydraulic fluids. nd it had to produce better and more reliable dry rod performance than the standard serrated lip-seal design in a broad range of applications. The result is the TS-000 seal, designed especially to eliminate rod seal leakage in the most demanding applications. It features a special polyurethane material that will not react chemically with petroleum-based hydraulic uid, is extremely resistant to abrasion and extrusion, and provides exceptional service life. It has more sealing edges than other seals on the market, which in turn produces dry rod performance. The seal geometry was refined for maximum stability in the groove and has excellent performance characteristics throughout a broad range of pressures and piston rod velocities. The Parker design team was successful! TS-000 rod seal has not failed in any of the test applications in the lab or on the job, no matter how tough or demanding. For more information on the TS-000 call or write your local Parker distributor or Parker Hannifin orporation, Division, 500 S. Wolf Road, Des Plaines, IL 6006, Worldclass Quality Products and Service For additional information call your local Parker Distributor. 6

23 Large ore High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Thirteen Standard Mounting Styles For Division Plant Locations See Page II.

24 The large bore, high pressure hydraulic cylinder Parker designed to meet your needs In the Series H cylinder you get unmatched reliability, performance, and innovative design features to help increase productivity and reduce your operating costs. Parker s externally removable bolt-on gland assembly makes preventive maintenance fast...and easy! ou do not have to disassemble the cylinder, loosen the tie rod nuts, or remove the long cast iron rod bearing to replace the patented Polypak double bevel lipseal and double service Wiperseal. The ruggedly constructed gland assembly includes the ultimate in sealing for extra heavy duty applications in most any industry. The high pressure large bore Series H hydraulic cylinder also includes the innovative anti-extrusion body end seal design...where the heads and caps are specially machined to prevent extrusion of the body end seals and insure against leakage PLUS... every cylinder is individually tested before it leaves our plant. For quick delivery, the Series H is available to you from our regional plant system. Select genuine Parker cylinder replacement parts are stocked by over 0 local Parker distributors from coast-to-coast. See pages 90 and 9 for all the features that make the Parker Series H your best choice for all your large bore high pressure hydraulic cylinder applications... For additional information call your local Parker Distributor.

25 Series H Large ore High Pressure Hydraulic s Specifications/ Mountings Large ore Sizes Standard Specifications Heavy Duty Service Standard onstruction Square Head Tie Rod Design Nominal Pressure 000 PSI Standard Fluid Hydraulic Oil Standard Temperature -0½F. to +65½ F. ore Sizes 0" through 0" (Larger sizes available) In line with our policy of continuing product improvement, specifications in this catalog are subject to change. Piston Rod Diameter /" through 0" Mounting Styles Ten standard styles at various application ratings Strokes vailable in any practical stroke length ushions Optional at either end or both ends of stroke Rod nds Two Standard hoices Specials to Order If hydraulic operating pressure exceeds 000 PSI, send application data for engineering evaluation and recommendation. See section, page for actual design factors. See section, page for higher temperature service. Tie Rods xtended Head nd Style T 0"-" ore, Page 9 vailable Mounting Styles Tie Rods xtended ap nd Style T 0"-" ore, Page 9 Tie Rods xtended oth nds Style TD 0"-" ore, Page 9 Head Rectangular Style 0"-0" ore, Page 9 (NFP MX) (NFP MX) (NFP MX) (NFP M5) Head Square Flange ap Rectangular ap Square Flange Side Lug Style 0"-0" ore, Page 9 Style HH 0"-0" ore, Page 96 Style H 0"-0" ore, Page 96 Style 0"-" ore, Page 96 (NFP MF5) (NFP M6) (NFP MF6) (NFP MS) enterline Lugs ap Fixed levis Head Trunnion ap Trunnion Style 0"-" ore, Page 96 Style 0"-0" ore, Page 9 Style D 0"-" ore, Page 9 Style D 0"-" ore, Page 9 (NFP MS) (NFP MP) (NFP MT) (NFP MT) Intermediate Fixed Trunnion Double Rod s Style DD 0"-0" ore, Page 9 Style T Shown Most of the above illustrated mounting styles are available in double rod cylinders. See atalog Page 00. (NFP MT) For Division Plant Locations See Page II. 9

26 These innovative design features make Parker Series H your best choice... for all your large bore high pressure hydraulic cylinder applications... nd Seals Pressure-actuated cylinder body-to-head and cap O rings and back-up washers. Primary Seal Polypak double-bevel lip design combines ease of installation with rugged construction. The ultimate seal in extra heavy duty applications. ompletely self-compensating and self-relieving to withstand pressure variations and conform to mechanical deflection that may occur. Secondary Seal Double-Service Wiperseal (Patent #90596) wipes clean any oil film adhering to the rod on the extend stroke and cleans the rod on the return stroke. olt-on Rod land ssembly xternally removable without cylinder disassembly. Long cast-iron bearing surface is inboard of the seals, assuring positive lubrication from within the cylinder. n O ring is used as a seal between gland and head. Optional Piston Steel Head ored and grooved to provide concentricity for mating parts. ast iron ring piston is available as a special modification. lloy Steel Tie Rod Nuts With hardened washer. High Strength Tie Rods Made from 00,000 PSI minimum yield steel with rolled threads for added strength. Parker s xclusive Stepped floating cushions combine the best features of known cushion technology. Deceleration devices or built-in cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. Standard straight or tapered cushions have been used in industrial cylinders over a very broad range of applications. Parker research has found that both designs have limitations. s a result, Parker has taken a new approach in cushioning of industrial hydraulic cylinders and for specific load and velocity conditions have been able to obtain deceleration curves that come very close to the ideal. The success lies in a stepped sleeve or spear concept where the steps are calculated to approximate theoretical orifice areas curves. In the cushion performance chart, pressure traces show the results of typical orifice flow conditions. Tests of a three-step sleeve or spear show three pressure pulses coinciding with the steps. The deceleration cushion plunger curves shape comes very close to being theoretical, with the exception of the last /" of travel. This is a constant shape in order to have some flexibility in application. The stepped cushion design shows reduced pressure peaks for most load and speed conditions, with comparable reduction of objectionable stopping forces being transmitted to the load and the support structure. The Series H design incorporates the longest cushion sleeve and cushion spear that can be provided in the standard envelope without decreasing the rod bearing and piston bearing lengths. Stepped ushions Sleeve Design Spear Design For additional information call your local Parker Distributor. 90

27 Piston Rod Hard chrome-plated and polished for maximum seal and rod bearing life. Two standard thread styles. Rod end is supplied with spanner wrench holes. lign--roove (Patent #069) /6" wide surface machined at each end of the cylinder body. Makes precise mounting quick and easy. Hi-Load Piston Seals re standard. Ports S O-ring straight thread ports are standard. Optional Ports Ports S straight thread ports or NPTF (Dry Seal Pipe Ports) are available for an extra charge. (See pages -99, -0.) Seals una-n (Nitrile) seals are standard. iton Seals Optional at extra charge. One-Piece ast Iron Piston For maximum strength and minimum size. Long thread engagement and largest practical thread sized provides maximum shock resistance. One piece design is piloted to piston rod assuring concentricity. Piston is locked with set screw. naerobic adhesive and peening of set screw locks and seals piston to rod. The ody Heavywall steel tubing is honed to a 5 RMS micro finish bore providing a wear surface for long lasting piston bearing and seal life. djustable Floating Stepped ushions For maximum performance. conomical and flexible for even the most demanding applications. Provides superior performance in reducing shock. ushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. Steel ap ored and grooved to provide concentricity for mating parts. USHION PRSSUR USHION PRFORMN TPIL STRIHT USHION IDL USHION TPIL STPPD USHION USHION POSITION () When a cushion is specified at the head end: a. stepped sleeve is furnished on the piston rod assembly. b. needle valve is provided that is flush with the side of the head even when wide open. It may be identified by the fact that it is socket-keyed. It is located on side number, in all mounting styles except. In this style it is located on side number. c. springless check valve is provided that is also flush with the side of the head and is mounted on the same side as the needle valve except on mounting style, where it is mounted on side number, next to the needle valve. It may be identified by the fact that it is slotted. d. The check and needle valves are interchangeable in the head. () When a cushion is specified at the cap end: a. cushion-stepped spear is provided on the piston rod. b. socket-keyed needle valve is provided that is flush with the side of the cap when wide open. It is located on side number in all mounting styles except. In this style it is located on side number. c. springless check valve is provided that is also flush with the side of the cap and is mounted on the same side as the needle valve except on mounting style, where it is mounted on side number, next to the needle valve. d. The check and needle valves are interchangeable in the cap. For Division Plant Locations See Page II. 9

28 Tie Rod Mountings Large ore Sizes Series H Large ore High Pressure Hydraulic s Tie Rods xtended Head nd Style T (NFP Style MX) Z + STRO P + STRO L + STRO RD MM DD Z + STRO Tie Rods xtended ap nd Style T (NFP Style MX) Z + STRO P + STRO L + STRO RD MM DD Z + STRO Tie Rods xtended oth nds Style TD (NFP Style MX) asic Mounting (T) Not shown is no tie rod extended and can be supplied upon request. Z + STRO P + STRO L + STRO RD MM DD Z + STRO Rod nd Dimensions see table Thread Style LF (NFP Style SM) Small Male.55 DI. x.5 DP HOLS F If rod end is not specified, Style will be furnished. MM RD Thread Style 9 (NFP Style SF) Small Female.55 DI. x.50 DP HOLS F MM RD Use Style 9 for applications where female rod ends are required. Special Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for, and LF or. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor. 9

29 Series H Large ore High Pressure Hydraulic s Tie Rod Mountings Large ore Sizes Table nvelope and Mounting Dimensions f S... S... dd Stroke NPTF FLN STRIHT ore D DD PO THRD R R R RR L P 0 / / - 5 / / 6 / 6 9 / / / / / / - / / / / 6 / 6 / / / 0 / / /- / / / / / / / 5 5 / 0 / NPTF ports are available for an extra charge. Optional S flange ports may be specified flange to be supplied by customer. See Table for flange port pattern dimensions. S straight thread ports are standard and are indicated by port number. Table Rod Dimensions Table nvelope and Mounting Dimensions Rod xtensions and Pilot Dimensions dd Stroke Rod Rod Dia. Thread ore No. MM F LF RD Z Z / / - / / 6 / 6 / / / 5 /6 / 6 / 5 / / 6 0 / 6 / 0 / / / 5 5 / / 5 5 / 5 / / 6 / 6 / / / / / 5 5 / 6 5 / 5 / / 5 / / 6 5 / 6 / 6 / 6 5 / 5 / 9 / 9 / / / /6 /6 5 5 / 6 9 / 5 5 / 6 9 / / 6 5 / / 6 5 / 6 0 / / 6 / / 0 / / / / 6 / / 5 / 6 9 / / 0 5- / - 5 / / 6 5 / 6 5 / 6 0 / / 6 / 9 / / 0 / / / / / / / / 5 / 6 / 6 / 0 / / / 9 / 0 / / Table Optional S Flange Port Pattern Table 5 Tie Rod Information see table for dimensions DI. R Q R R RR DI. R R W Nom. Flange Size / / X Q W X Z-THD UN- /- /- /- 5/- HD OR P Z HOLS FULL THRD DPTH Min R R 0", " ores, Tie Rods " ores, Tie Rods R R R For Division Plant Locations See Page II. 9

30 Head Rectangular and Square Mountings Large ore Sizes Series H Large ore High Pressure Hydraulic s Head Rectangular Mounting Style (0"-" ore) (NFP Style M5) UF Z + STRO P + STRO L + STRO R RD MM TF F HOLS Head Rectangular Mounting Style (6"-0" ore) (NFP Style M5) P + STRO POS R R RD MM ROD DI. TF UF F DI. THRU () HOLS L + STRO Z + STRO Head Square Flange Mounting Style (NFP Style MF5) X Z + STRO P + STRO L + STRO T R X RD MM R T HOLS Rod nd Dimensions see table Thread Style LF (NFP Style SM) Small Male.55 DI. x.5 DP HOLS F MM RD If rod end is not specified, Style will be furnished. Thread Style 9 (NFP Style SF) Small Female.55 DI. x.50 DP HOLS F MM RD Use Style 9 for applications where female rod ends are required. Special Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for, and LF or. If otherwise special, furnish dimensional sketch. For additional information call your local Parker Distributor. 9

31 Series H Large ore High Pressure Hydraulic s Head Rectangular and Square Mountings Optional Flange Ports Tie Rod Information Table nvelope and Mounting Dimensions f S... S... dd Stroke NPTF FLN STRIHT ore PO THRD X F R R T TF UF L P 0 5 / 5 /6 6 5 / / 6 / 6 / 6 9 / / 9 / / / 9 / 6 / / 9 / /6 / 6 / 6 / / / 0 / / / 6 / / / 5 / 6 / / / / 0 / Table nvelope and Mounting Dimensions dd Stroke ore (S) (FLN) X F R R R T TF UF L P / 6 /6 / / 6 / 9 / 6 / 6 /6 5 / 6 / / 5 / 6 / / 9 / 9 / 9 / 5 / 0 / / 6 / / / 0 / / / 5 / / 5 / 5 / NPTF ports are available at an extra charge. Optional S flange ports may be specified flange to be supplied by customer. See Table for flange port pattern dimensions. S straight thread ports are standard and are indicated by port number. Table Rod Dimensions Rod xtensions and Pilot Dimensions dd Stroke Rod Rod Dia. Thread ore No. MM F LF RD Z / 5 5 / 5 / / - 5- / / / - 5 / - 5 / - 6 / - / - 6 / - / - / - / 5 5 / 5 / / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 5 / 6 / 6 0 / / 6 / 6 / 6 0 / 0 / / / / / / / / 6 / / 5 / 5 / / 6 / 6 / 9 / / / / 9 / / 9 / 9 / / 0 / / 9 / 9 / / 0 / 0 / / / / / / / / / / / / / / / / / / / / / / / / / 5 /6 / / 6 /6 / 6 / / / / / / / / Table nvelope and Mounting Dimensions / 5 5 / / 6 / 6 5 / 6 5 / 6 / 6 / / / / / / 6 / 6 9 / 6 9 / 6 9 / 9 / 9 9 / 9 / 0 / / / / 9 / / 9 / / 0 / Table Optional S Flange Port Pattern DI. Table 5 Tie Rod Information R R R R R Q Nom. Flange Size /.50 X Q W X 0.0 W HD OR P Z HOLS FULL THRD DPTH Z-THD UN- /- Min..06 R R 0", " ores " ore ore 0 6 Tie Rod Thread /- /- /- 0 R R R /-.06 R / /-.9 R /-.9 R.09 onsult factory for dimensions For Division Plant Locations See Page II. 95

32 ap Rectangular and Square, Side Lug and enterline Lug Mountings Large ore Sizes Series H Large ore High Pressure Hydraulic s ap Rectangular Mountings Style HH (NFP Style M6) Note: 0"-" ores have () mounting holes, 6"-0" ores have () mounting holes. P + STRO POS (6-0" ONL) R R RD MM (0-" ONL) ROD DI. TF UF F DI. THRU () HOLS 6-0" OR () HOLS 0-" OR L + STRO XF + STRO ap Square Flange Mounting Style H (NFP Style MF6) X P + STRO L + STRO T R X RD MM R T HOLS XF + STRO Side Lugs Mounting Style 0"-" ore only (NFP Style MS) Note: Stroke lengths on lug mounted cylinders should not be shorter than the cylinder bore diameter. onsult factory for recommendations on shorter stroke lengths. See page 00 for further recommendations on side lug mountings. US Z + STRO P + STRO L + STRO RD MM ST SW SW TS SW SW S HOLS SW XS SU SS + STRO SU SW enterline Lugs Mounting Style 0"-" ore only (NFP Style MS) US Z + STRO P + STRO L + STRO ST S HOLS RD MM SW SW TS SW SW SW XS SU SS + STRO SU SW For additional information call your local Parker Distributor. 96

33 Series H Large ore High Pressure Hydraulic s ap Rectangular and Square, Side Lug and enterline Lug Mountings, Optional Flange Ports Tie Rod Information Rod nd Dimensions see table Thread Style LF (NFP Style SM) Small Male F If rod end is not specified, Style will be furnished..55 DI. x.5 DP HOLS MM RD Thread Style 9 (NFP Style SF) Small Female Use Style 9 for applications where female rod ends are required. Table nvelope and Mounting Dimensions f dd Stroke S... S... ore NPTF FLN STRIHT PO THRD X F R R S ST SU SW T TF TS UF US L P SS 0 5 / 5 / / / 6 / 6 / 6 9 / / 6 / / 5 /. 5 / 5 / 9 9 / / / / / 9 / 6 / / 9 / / 6 / 6 / 6 / / 6 / 6.9 / / / / 0 / 0 / / / 6 / / / 5 / 6 / / / / 6 / /. 5 / 5 6 / 5 5 / 0 / / Table nvelope and Mounting Dimensions Table nvelope and Table Rod Dimensions Mounting Dimensions Rod xtensions and Pilot Dimensions dd Stroke Rod Rod Dia. Thread ore No. MM F LF RD XS XF Z (Std.) / /- / /6 /6 / / / 5 / 6 / 9 / 6 5 / 6 6 / / 6 0 / 6 / 0 / / / 5 5 / 6 5 / 5 5 / 6 9 / 5 / /6 /6 / / / / 6 5 / / / 5 / - 5 / / 6 / 6 5 / 9 / / / 6 5 / / / (Std.) 5 / - 5 / /6 /6 5 / 9 / / / 6 5 / 5 / 6 / 6 9 / 5 / / 6 / / / 6 / 6 6 / 9 9 / /6 0 / 6 / 0 / / / 5 / 6 5 / 9 / / 6 0 / 6 / 0 / / / 5 / 5 / 9 / 0 / 0 / /6 / 9 / / / / 6 / 6 / 0 / / 5 / / 6 / / / 6 / 6 / 9 5 / / 5 / /6 / / / / / / 6 / / / / / / / 0 / /6 / 9 / / / / / 5 / 9 6 / / 6 / / / / / / 5 / 0 / /6 / 9 / / / / / 5 5 / 0 0 / / 6 / 9 / / / / / / onsult Factory Table Optional S Table 5 Tie Rod Information R Flange Port Pattern R R.55 DI. x.50 DP HOLS dd Stroke ore (S) (FLN) X F R R R T TF UF L P 6 9 / 6 0 / / 6 5 / 5 / 9 / 5 / 5..0 / / / / 6 6 / / 6 6 / 6 / 9 / / / / / 5 / 0 / / 6 / / 9 / / 0 / 5 / 5 / F MM RD R Special Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for, and LF or. If otherwise special, furnish dimensional sketch. R NPTF ports are available at an extra charge. Optional S flange ports may be specified flange to be supplied by customer. See Table for flange port pattern dimensions. S straight thread ports are standard and are indicated by port number. 0", " ores " ore Nom. Flange Size / / Q W X Z-THD UN- /- /- /- 5/- Min X W DI. Q HD OR P Z HOLS FULL THRD DPTH R R ore 0 6 Tie Rod Thread /- / - /- R R R R R R onsult factory for dimensions For Division Plant Locations See Page II. 9

34 ap Fixed levis and Trunnion Mountings Large ore Sizes Series H Large ore High Pressure Hydraulic s ap Fixed levis Mountings Style (NFP Style MPI) Z + STRO P + STRO L + STRO LR MR RD MM D L M W W X + STRO Head Trunnion Mounting Style D 0"-" ore only (NFP Style MT) UT Z + STRO P + STRO L + STRO TD RD MM TL TL X ap Trunnion Mounting Style D 0"-" ore only (NFP Style MT) UT Z + STRO P + STRO L + STRO TD RD MM TL TL X + STRO Intermediate Fixed Trunnion Mounting Style DD (NFP Style MT) UM Z + STRO P + STRO L + STRO D T TD UW RD MM TL TM TL XI For additional information call your local Parker Distributor. 9

35 Series H Large ore High Pressure Hydraulic s ap Fixed levis and Trunnion Mountings/Optional Flange Ports Tie Rod Information Large ore Sizes Rod nd Dimensions see table Thread Style LF (NFP Style SM) Small Male F If rod end is not specified, Style will be furnished..55 DI. x.5 DP HOLS MM RD Thread Style 9 (NFP Style SF) Small Female Use Style 9 for applications where female rod ends are required. Table nvelope and Mounting Dimensions.55 DI. x.50 DP HOLS Special Thread Style Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style and give desired dimensions for, and LF or. If otherwise special, furnish dimensional sketch f dd Stroke -.00 S... S... FLN STRIHT -.00 ore D D W NPTF PO THRD L LR M MR TD TL TM T UM UT UW L P 0 / / / 6 / 6 9 / / / /.500 / 9 5 / / / / 5 / /.000 / / / / / 6 /6 / / / / 5 / / / 0 / / 0 / 5 / / / / / / / 5 / / / 9 / 9 / / 6 / / 5 5 / 0 / Table nvelope and Mounting Dimensions (Style only) dd Stroke ore (S) (FLN) D W L LR M MD MR L P / / / / 5 / 6 / / 5 / 6 / / 9 / 9 / 9 / 5 / / 6 / 6 / / 6 6 / / / / / / 5 / / 5 / 5 / F MM RD NPTF ports are available at an extra charge. Optional S flange ports may be specified flange to be supplied by customer. See Table for flange port pattern dimensions. S straight thread ports are standard and are indicated by port number. Dimension D is pin diameter. Table nvelope and Table Rod Dimensions Mounting Dimensions Rod xtensions and Pilot Dimensions dd Stroke Rod Rod Dia. Thread Min. ore No. MM F LF RD X XI X X Z Z (Std.) / / - / / /6 5 / / 6 5 / - 5 / /6 (Std.) 5 / - 5 / / 6 5 / /6 5 / /6 0 / - 5 / / 6 5 /6 5 / / / /6 0 / / / /6 0 / / / /6 Dimension XI to be specified by customer. onsult Factory. Table Optional S Flange Port Pattern / 6 0 / / 6 /6 / 6 0 / 0 / / / / / / / / 6 / / 5 / 5 / / 6 / 6 / 9 / / / / 9 / / 9 / 9 / / 0 / / 9 / 9 / / 0 / 0 / / / / / / / / / / / / / / / / / / / / / / / / / 5 / 6 / / 6 / 6 / 6 / / / / / / / / / 5 5 / / 6 / 6 5 / / / 6 6 / 6 Table 5 Tie Rod Information R R 9 / 6 9 / 9 5 / / / / 0 5 / 6 / 6 / 6 5 / 6 / 5 5 / / 6 / 6 5 / 6 5 / 6 / 6 / / / / / / 9 / / 9 5 / / 6 / 6 / / 5 / 5 / 9 / 9 / 9 5 / / 6 / 0", " ores " ore R / 5 / 6 5 / 5 / 5 / 6 5 / 6 5 / 6 6 / 6 / 6 / 6 R R 6 / 6 9 / 6 9 / 6 9 / 9 / 9 9 / 9 / 0 / / / 9 / 6 / / 6 / 6 6 / 6 6 / 9 / 0 / 0 / 5 / 5 / 5 5 / 9 / 9 / / Nom. Flange Size / / Q W X Z-THD UN- / - / - / - 5/- Min X W DI. Q HD OR P Z HOLS FULL THRD DPTH ore 0 Tie Rod Thread /- /- /- R R R R R 6 0 R R R onsult factory for dimensions For Division Plant Locations See Page II. 99

36 Double Rod Models Mounting Recommendations/ Pressure Ratings Large ore Sizes Series H Large ore High Pressure Hydraulic s How to Use Double Rod Dimensioned Drawings ZM + x STRO Z + STRO P + STRO L + STRO RD MM SW XS SU SS + STRO SU SW Mounting Styles for Single Rod Models T T TD D DD Mounting Styles for orresponding Double Rod Models T TD D DD Dimension Shown on This Page Supplement Dimensions on Pages Listed elow If only one end of these Double Rod s is to be cushioned, be sure to specify clearly which end this will be. To obtain dimensioning information on a double rod cylinder, first select the desired mounting style and refer to the corresponding single rod cylinder model shown on the preceding pages. (See table at left.) fter you have determined all necessary dimensions from that drawing, turn back to this page and supplement those dimensions with additional ones from the drawing above and table at right. These added dimensions differ from, or are in addition to, those shown on the preceding pages and provide the additional information needed to completely dimension a double rod cylinder model. On a double rod cylinder where the two rod ends will be different, be sure to state very clearly which rod end is to go at which end of the cylinder. ore Rod ode Rod Dia. / 5 5 / 5 / dd X Stroke ZM 9 / / / 0 / / / 5 / 5 / 5 / 6 / 6 5 / / 9 5 / 0 / 5 / Mounting Recommendations and Other Mountings In addition to the standard mountings dimensioned on the preceding pages, the following information covers mounting ideas that may prove helpful in your applications. When needed, special heads, caps, and flanges can be provided. Sketches of your requirements, together with specifications relative to the application and forces involved should be submitted. Mounting olts High tensile socket head screws are recommended for all mounting styles. Use /6" smaller than hole size. Flange Mountings s can be properly centered by measuring from piston rod diameter. fter mounting the flange may be drilled for pins or dowels to prevent shifting. Side Lug Mountings aution, cylinders which do not absorb force on their centerline (roup ) tend to sway when under load. Short stroke, non-centerline mounted cylinders can subject mounting bolts to large tension forces which when combined with shear forces can overstress standard mounting bolts. Side lug mounted cylinders should always be prevented from shifting through use of shear keys so located as to resist the major load, whether push or pull. Trunnion Mountings s require lubricated pillow blocks with minimum bearing clearances. Pillow blocks should be carefully aligned and rigidly mounted so the trunnions will not be subjected to bending moments. The rod end connection should also be pivoted, with the customer s pin in the piston rod knuckle parallel to the trunnions. levis Mountings s should be pivoted at both ends, with the customer s pin in the piston rod knuckle parallel to the pivot pin supplied with the clevis. Metallic Rod Wiper When specified, metallic rod wipers can be supplied at extra cost, instead of the standard synthetic rubber wiperseal. Recommended in applications where atmospheric particles or splashings tend to cling to the extended piston rod and otherwise damage the synthetic rubber wiperseal. Installation of metallic rod wiper does not affect cylinder dimensions. For additional information call your local Parker Distributor. 00

37 Notes For Division Plant Locations See Page II. 0

38 How to Order/ Service Policy Large ore Sizes Series H Large ore High Pressure Hydraulic s How to Order Series H s Note: Duplicate cylinders can be ordered by giving the SRIL NUMR from the nameplate of the original cylinder. Factory records supply a quick, positive identification. ore: Specify bore in inches. Mounting Style: Specify your choice of mounting style as shown and dimensions in this catalog. If double rod is wanted, specify with double rod. Series Designation (H) Length of Stroke Piston Rod Diameter: Data Required on ll Orders When ordering Series H cylinders, be sure to specify each of the following requirements: all out rod diameter or rod code number. In Series H cylinders, standard rod diameters (ode No. ) will be furnished if not otherwise specified, unless length of stroke makes the application questionable. Piston Rod nd Thread Style: ushions (If required): Hi-Load Piston or lternate ast Iron Rings: Ports: Fluid Medium: dditional Data: all out thread style number or specify dimensions. Thread style number will be furnished if not otherwise specified. Specify ushion-head end, ushion-cap end or ushion-both ends as required. If cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned. Hi-Load Pistons are furnished as standard. Parker recommends S Straight Thread Ports on Series H. Series H hydraulic cylinders are equipped with seals for use with hydraulic oil. If other than hydraulic oil will be used, specify class of fluid (see atalog section ). dditional data is required on orders for cylinders with special modifications. For further information, consult factory. lass Seals lass seals are the seals provided as standard in a cylinder assembly unless otherwise specified. For further information on fluid compatibility on operating limitations of all compounds, see section. For the H series cylinders the following make-up lass Seals: Primary Piston Rod Seal Nitrile Piston Rod Wiper Nitrile Service Policy On cylinders returned to the factory for repairs, it is standard policy for the Division to make such part replacements as will put the cylinder in as good as new condition. Should the condition of the returned cylinder be such that expenses for repair would exceed the costs of a new one, you will be notified. ddress all correspondence and make shipments to Service Department at your nearest regional plant listed on page I. Warranty Seller warrants the goods sold hereunder to be free from defects in material and workmanship. This warranty shall terminate eighteen months after date of shipment from Seller s plant and claims not made in writing within such period are waived. The above warranty does not extend to goods damaged after date of shipment from Seller s plant where the damage is not directly due to a defect in material or workmanship, nor does it apply to goods altered or repaired by anyone other than Seller s authorized employees, nor to goods furnished by uyer or acquired at uyer s request and/or to uyer s specifications. If the goods are in accordance with or in reference to an engineering drawing specified by or furnished to the customer, the specifications and information on the drawing shall be applicable in determining such correct use, operation and application. Piston Seals Hi-Load. Filled PTF seals with a nitrile expander Option ast Iron Rings O-Rings Nitrile (nitrile back-up washer when used) dditional data is required on orders for cylinders with special modifications. For further information, consult factory. ertified Dimensions Parker Division guarantees that all cylinders ordered from this catalog will be built to dimensions shown. ll dimensions are certified to be correct, and thus it is not necessary to request certified drawings. When claiming a breach of warranty, uyer must notify Seller promptly whereupon Seller will either examine the goods at their site, or issue shipping instructions for return to Seller (transportation costs prepaid by uyer). When any goods sold hereunder are proved not as warranted, Seller s sole obligation under this warranty shall be to repair or replace the goods, at its option, without charge to uyer. The above warranty comprises Seller s sole and entire warranty obligation and liability to uyer, its customers and assigns in connection with goods sold hereunder. ll other warranties, express or implied, including but not limited to, warranties of merchantability and fitness, are expressly excluded. For additional information call your local Parker Distributor. 0

39 Series H Large ore High Pressure Hydraulic s Series H Model Numbers How to Develop Them How to Decode Them Parker Series H cylinders can be completely and accurately described by a model number consisting of coded symbols. For single rod cylinders a maximum of places for digits and letters are used in a prescribed sequence to produce a model number. Only nine places are needed to completely describe a standard non-cushioned Series H cylinder. To develop a model number, select only those symbols that represent the Feature Description Page No. Symbol ore Specify in inches ushion-head Double-Rod Mounting Style ombination Mounting Style Used only if cushion required Used only if double-rod cylinder is required Tie Rods xtended ap nd (0"-" ore) Tie Rods xtended Head nd (0"-" ore) Tie Rods xtended oth nds (0"-" ore) Head Square Flange Head Rectangular ap Square Flange ap Rectangular Side Lugs (0"-" ore) enterline Lugs (0"-" ore) ap Fixed levis Head Trunnion (0"-" ore) ap Trunnion (0"-" ore) Intermediate Fixed Trunnion ny Practical Mounting Style Listed bove 9, T T TD H HH D D DD s listed above Model Numbers Large ore Sizes cylinder required, and place them in the sequence indicated below. The example makes use of all places, although many model numbers will not require all, as in the case where cushioning, double rod, or special modifications are not required. Note: Page numbers with a letter prefix, i.e.:, are located in section of this catalog. 0" H T S " Series Piston Used in all H Model Numbers Hi-Load Piston standard Used only for Ring Packed Piston 9, H Ports ommon Modifications Special Modifications Piston Rod Number Piston Rod nd Piston Rod Threads ushion-ap Stroke S Straight Thread O-Ring Port (Standard) Used only for NPTF (Dry Seal Pipe Thread) (0-" ore Only) Used only for SP (Parallel Thread ISO ) Used only for S Flange Ports (000 psi) Used only for SPT (Taper Thread) Used only for Metric Thread Used only for Metric Thread per ISO 69 iton Seals Water Service Used only if special Modifications are required: Port Position hange Special Seals Stop Tube For Single Rod s, select one only. Refer to Rod number listing, Table, Pages 90 through 9 Select: Style Small Male Style 9 Short Female Style Special (Specify) UNF Standard SF (ritish Fine) Metric Used only if cushion required Specify in inches s with this mounting style should have a minimum stroke length of equal to or greater than its bore diameter. Required for asic Model Number See chart in Section for minimum piston rod diameter , 9 9 9, 90 T U R P W S 9 W M Use Symbol S to designate special Modification except piston rod end Styles,, and 9 are catalog standards Specify Style for any special piston rod end Double Rod s For double rod cylinders, specify rod number and rod end symbols for both piston rods. typical double rod model number would be: 0" -H/X" For Division Plant Locations See Page II. 0

40 Parker TS-000 seal designed to eliminate cylinder rod seal leakage. Parker Series H Heavy Duty and Series L Medium Duty Hydraulic s with the TS-000 seal offers positive protection against cylinder rod leakage under the most demanding applications. The TS-000 seal is the product of countless hours of research, development and extensive field testing and is only available on Parker s. ased on the popular Parker Serrated Lipseal rod design, the TS-000 incorporates the pressurecompensated, uni-directional characteristics of a U-cup with the multiple edge sealing effectiveness of compression-type stacked-packings. The goal for the Parker team was to design a rod seal suitable for all types of applications, regardless of pressure profile. It had to be composed of a ewel gland with wiperseal and TS-000 cylinder rod seal. material that would not react chemically with hydraulic fluids. nd it had to produce better and more reliable dry rod performance than the standard serrated lip-seal design in a broad range of applications. The result is the TS-000 seal, designed especially to eliminate rod seal leakage in the most demanding applications. It features a special polyurethane material that will not react chemically with petroleum-based hydraulic uid, is extremely resistant to abrasion and extrusion, and provides exceptional service life. It has more sealing edges than other seals on the market, which in turn produces dry rod performance. The seal geometry was refined for maximum stability in the groove and has excellent performance characteristics throughout a broad range of pressures and piston rod velocities. The Parker design team was successful! TS-000 rod seal has not failed in any of the test applications in the lab or on the job, no matter how tough or demanding. For more information on the TS-000 call or write your local Parker distributor or Parker Hannifin orporation, Division, 500 S. Wolf Road, Des Plaines, IL 6006, Worldclass Quality Products and Service 0 For additional information call your local Parker Fluidpower Motion & ontrol Distributor.