HEAVY DUTY PNEUMATIC CYLINDERS

Size: px
Start display at page:

Download "HEAVY DUTY PNEUMATIC CYLINDERS"

Transcription

1 HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless Steel tube with hard chrome plated bore. High yield strength Carbon steel piston rod. Precision machined Solid steel Head & Cap. High strength carbon steel tie rods to hold the Head & Cap. High grade Cast iron piston & rod bearings. Nitrile seals. (High temp. resistant Viton / PTFE seals optional). Varieties of mounting possibilities & Accessories.

2 Type:ISO:30 HEAVY DUTY CYLINDES Technical Specifications : Specification Units Technical Details Standard strokes Other strokes Medium Testing pressure Materials Mountings mm bar,,, 0, 1, 0, 0, 0, 0, 0 With Stop tube upto 00 Compressed, Filtered air Steel, Cast iron, Nitrile & Teflon Extended tie rod, Side Lug, ectangular flange, Cap clevis & Cap eye, Trunnion, Side tapped, Center line Lug, End Lug, Square flange & Square Accessories Std. Non std. od clevis - ISO : 81 & od end Spherical eye - ISO : 813 od eye, Eye/Clevis Bracket & Pin, & od coupler Effective Piston Area & Force Table Cyl. Piston od Piston Area (cm² ) Forward `F' etract `' 1 Thrust (F) etraction () Force in Kgf Operating pressure in Kg/cm² F F F F F F Air Consumption per cm. kg/cm² in Litres (Free Air) Ordering Code XX- OD XXX- MOUNTING XXXX- STOKE TA-S- XXX- BOE Series XX CUSHION -X OD THDS. -XXXX ACCES- SOIES XXXX SPECIAL S-Single end rod D-Double end rod,,,,, 0, 1, 0, 0, 0, 0, 0, 0,, Stroke with,, stop tube,, in bracket,, upto 00mm, Example: TAS---0-MP3-CB-MT-S Indicate code as per Mounting Data Sheets CB - both ends CH - head end CC - cap end NC - noncushioned FT - female thrd. MT - male thrd. Indicate code as per Mounting Data Sheets (Give full detail in text) C07-02

3 Type:ISO:30 HEAVY DUTY CYLINDES END COVES Solid steel end covers precision machined for true alignment between tube, piston rod and rod bearing. WIPE SEAL Nitrile wiper seal to prevent dust from entering into the cylinder. CUSHION SEAL Self-centering Nitrile cushion seals provide smooth deceleration at end of stroke and quick start at beginning of stroke. END SEAL Leak-proof tubing end seal. TUBE Seamless steel tube precision honed and hard chrome plated to ensure low friction, resistance to corrosion and wear and long seal life. TIE OD High strength Carbon steel Tie rods hold the end covers in position at all pressures, protect the tube and help absorb shock loads. OD SEAL Projecting lip-type Nitrile rod seal effectively seals inside pressure. Seal cannot turn, roll or blow-out at any pressure. PISTON OD High-yield strength Carbon steel piston rod precision ground and hard chrome plated for wear resistance and leak-proof performance of rod seal. PISTON High grade Cast iron piston and rod bearings. PISTON SEAL Mechanically locked-in position, self energising Nitrile rubber Cup seals for low friction, positive sealing and long life. Cushion Plunger CUSHION-CHECH Steel Needle valve for cushion adjustment. C07-03

4 Type:ISO:30 HEAVY DUTY CYLINDES Basic Cylinder Y EE P EE VD ØB VD ØMM WX AM WH Cushion Adjustment ZJ + Stroke ZB + Stroke D A/F `E' Sq. WH Above 0 Small etainer ØB ØMM Double end rod EE EE ØNA D A/F (Typ) Style - 2: Male Thrds. ØB (Typ) VD (Typ) ØB ØMM KF ØMM (Typ) WX AM WH Cushion Adjustment LD + Stroke WX+Stroke WH+Stroke AM A+2.0 Style - 4: Female Thrds. D A/F ØMM `E' Sq. ØB f WX VD WH ZJ ZB Min. Min. EE BSP LD Y P MALE THEADS AM ØNA D FEMALE THEADS A Pr. ating Kg/cm² 1 1 G 1/8" 6. Mx1. 11 M8x G 1/4" 6. Mx1. 13 Mx G 1/4" G 3/8" Mx1. Mx G 3/8" 3 3 G 1/2" Mx1. Mx G 1/2" M27x Mx G 3/4" G 3/4" Mx2 3 M30x G1" 2 1 M42x M33x2 NON - ISO G1" Mx2 4 M42x ±3. 8 ±3. 2 G1" 266 ± Mx2 Mx ±3. 3 ±3. 3 G 1-1/4" 2 ± Mx3 8 Mx3 8 Note: 1. Cylinder can work at pressures upto rating given above. 2. At rod end male threads `' are provided as standard. C07-04

5 Type:ISO:30 HEAVY DUTY CYLINDES Extended Tie od Mounts BB (Typ) BB DD TG WH ZJ + Stroke ZJ + Stroke TG DD MX1 - Mounting with Tie rods extended at both ends. MX2 - Cap Mounting with Tie rods extended. BB ZJ + Stroke TG DD DD WH BB BB ZB + Stroke MX3 - Head Mounting with Tie rods extended. MX4 - Both ends 2 Tie rods extended. Piston BB od DD TG js WH ZJ ZB +3.0 M M M M M M M M M M NON - ISO M 2 ± ± M 3 ±4.0 8 ± M30 4 ±4.0 3 ±4.0 3 C07-0

6 Type:ISO:30 HEAVY DUTY CYLINDES Side Lug Mounting `E' Sq. ØFB (4 Holes) LH ST SW SU SU SW TS XS SS + Stroke US MS2 - Mounting with Side Lugs. Piston `E' od Sq. ØSB H13 SS ST Min. SU SW TS JS US LH a XS NON - ISO C07-06

7 Type:ISO:30 HEAVY DUTY CYLINDES Trunnion Mounts ØTD (Typ) XG TL TC TL MT1 - Head Mounting, Integral Trunnion (Male) ØTD (Typ) TL TC TL XJ + Stroke MT2 - Cap Mounting, Integral Trunnion (Male) XV ØTD (Typ) UW TL TM TL MT4 - Mounting, with Intermete fixed or movable Trunnion (Male) Piston od ØD e TL h TM h UW 1 TC h 44 XG Nom. 44 XJ Tol. XV Min. Tol Stroke Min NON - ISO C07-07

8 Type:ISO:30 HEAVY DUTY CYLINDES ectangular Flange Mounts ØFB (4 Holes) E W MF ZB + Stroke TF UF MF1 - Head Mounting, ectangular Flange. ØFB (4 Holes) E TF UF MF2 - Cap Mounting, ectangular Flange. ZF + Stroke MF Piston MF od ØFB H13 E JS TS JS UF W ZB ZF ± ± ± C07-08

9 Cap clevis & Cap eye Mounts Type:ISO:30 HEAVY DUTY CYLINDES UB ØCD M CB MP1 - Cap Mounting, Fixed Clevis. XC + Stroke L ØCD M EW MP3 - Cap Mounting, Fixed Eye XC + Stroke L Piston CB od A ØCD H L Min. M XC UB EW h NON - ISO C07-0

10 HEAVY DUTY - NON ISO MOUNTINGS Side Tapped Mounts LH XT SN + Stroke NT (4 Holes) TN MX7 - Side Tapped Mounting. End Lug Mounts Piston `E' od Sq. ØSB H13 EL ET SE XE ZE Piston od LH NT TN XT XT M6 M M M M M M M M M M M M MS - End Lug Mounting. ZE + Stroke XE + Stroke `E' Sq. ØEB (4 Holes) ET EL SE + Stroke EL -0.2 E/2-0.1 C07-

11 HEAVY DUTY - NON ISO MOUNTINGS Center line Lug Mounts `E' Sq. ØFB (4 Holes) ST SW SU SU SW TS XS SS + Stroke US MS8 - Center line Lug Mounting. Piston od `E' Sq. ØSB H13 SS ST Min. SU SW TS JS US Nom. XS Tol C07-11

12 HEAVY DUTY - NON ISO MOUNTINGS Square Flange Mounts ØFB (8 Holes) `E' Sq. TF ME WE ZB + Stroke MF - Head, Square Flange Mounting TF `UF' Sq. `E' Sq. ØFB (8 Holes) TF TF `UF' Sq. ZH + Stroke ME MF - Cap, Square Flange Mounting Piston od ME ØFB H13 `E' Sq. TF `UF' Sq. WE ZH ZB C07-

13 HEAVY DUTY - NON ISO MOUNTINGS Square Mounts ØFB (4 Holes) TV WF ME - Head, Square Mounting. TV `UG' Sq. ØFB (4 Holes) TV TV ZJ + Stroke `UG' Sq. ME - Cap, Square Mounting. Piston od `UG' Sq. ØFB H13 TV WF ZJ C07-13

14 HEAVY DUTY - ISO STANDAD ACCESSOIES C - od clevis ISO: 81 ØCN A E CL CE H min. Mx1. CM Nom.Tol LE Min. CL E CL CM & Mx1. Mx & 0 Mx M27x CE ØCN LE & 0 Mx M42x A Mx NON - ISO 0 Mx2 0 Mx S - od end Spherical eye ISO: 813 E EN ØCN EN CE E A Tilting Angle Z H h Min. min. Mx1. 43 Z Mx1. ØCN Z & Mx1. CE & 0 Mx M27x A 0 & 0 Mx M42x Mx NON - ISO STANDAD ACCESSOIES E - od eye ØCK H A E CL CE Min. EM Nom.Tol. CS Min. LF CL E EM Mx1. Mx & Mx & 0 Mx CE ØCK LF 1 0 & 0 M27x2 30 Mx A 0 M42x Mx CS 0 Mx Mx C07-

15 LE Eye/Clevis Bracket & Pin ACCESSOIES M ØCK M ØCK/EK ØCK H ØEK f LE Min M h13 EM 26 HB H js FL 8 0 CM A CL js TB UH C js U G A/F Sph. motion) (al float ØCD T - od coupler 26 B1 Mx1. Mx1. Mx1. ØA1 AM 6 C1 ØD D1 G od Piston Mx1. Mx1. Mx1. M27x2 Mx2 Mx2 M42x2 Mx2 Mx2 Mx LE FL U C EM UH U CL CM TB FL D1 A/F AM C1 B1 ØA1 2 HEAVY DUTY - NON ISO STANDAD C07-

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

Large Bore Extruded Cylinders, ISO 6431 Series 41

Large Bore Extruded Cylinders, ISO 6431 Series 41 Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

Air Cylinders Type : ISO-6431 & VDMA-24562

Air Cylinders Type : ISO-6431 & VDMA-24562 Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

Pneumatic Cylinders NFPA Series

Pneumatic Cylinders NFPA Series Pneumatic Cylinders NFPA Series INDEX: General characteristics 3 Mounting styles 5 Piston rod characteristics (bore diam 25/150) 6 Single rod cylinder dimensions (bore diam 25/150) 8 Piston rod characteristics

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

Hydraulic Cylinder NFPA Industrial Type

Hydraulic Cylinder NFPA Industrial Type Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

Our policy is one of continued research and development. We therefore reserve the right to amend,

Our policy is one of continued research and development. We therefore reserve the right to amend, Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed

More information

Hydraulics H Y D R A U L I C S

Hydraulics H Y D R A U L I C S Hydraulics H Y D R A U L I C S Guarantees from a leading... BUT DIFFERENT COMPANY Companies tend to communicate values such as excellence, quality, commitment, honesty or customer service... At AirControl

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1 through 8 18 Mounting Styles. Catalog M September, 2011 Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm > Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC CYLINDERS, INC SERIES 3000 3000 PSI 5000 PSI NON SHOCK PURAKAL 1234 345 4567 6789 8901 0123 23 PURAKAL 1234567 HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S.Danebo Ave. Eugene, OR 97402-0414

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Twin Rod Non Rotate Cylinders RDV and AZ

Twin Rod Non Rotate Cylinders RDV and AZ Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

SERIES HH (NFPA) CYLINDER

SERIES HH (NFPA) CYLINDER HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

Nominal operating pressure (continuous service) bar 160. Maximum operating pressure bar 210. Peak pressure bar 250. Maximum speed (standard) m/s 0,5

Nominal operating pressure (continuous service) bar 160. Maximum operating pressure bar 210. Peak pressure bar 250. Maximum speed (standard) m/s 0,5 71 /17 ED HC2 HYDRAULIC CYLINDERS SERIES 2 ISO 62/2 (1991 EDITION) DIN 24554 DESCRIPTION Double acting cylinders constructed in compliance with ISO 62/2 (1991 edition) and DIN 24554. The compact design

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of

More information

Stainless steel Cylinders Series 90

Stainless steel Cylinders Series 90 90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

250 psi rating. series. pneumatic cylinders. bulletin 0606ST. 20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

RM/900/M Heavy duty cylinders Ø 1 1/4... 4

RM/900/M Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P. Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing

More information

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and

More information

Description. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333

Description. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm

More information

Trusted for reliability & service

Trusted for reliability & service Trusted for reliability & service Hydraulic : Cylinders, Power Packs, Presses, SPMs hydraulics & pneumatics Contents Introduction Ø From CO s desk... 03 Ø About us... 04-09 Ø Symbols... Ø Hydraulic Cylinders

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

SERIES TA (NFPA) CYLINDER

SERIES TA (NFPA) CYLINDER Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder

More information

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006 A NFPA Pneumatic Cylinders for working pressures up to bar Catalogue HY0-090/UK October 00 Catalogue HY0-090/UK Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises

More information

3MA/4MA Series Non-Lube NFPA Air Cylinders

3MA/4MA Series Non-Lube NFPA Air Cylinders MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table

Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston

More information

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting > > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)

More information

Strokes (mm) N/en

Strokes (mm) N/en IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated

More information

LPRA/182000/M Double acting profile cylinders Ø mm

LPRA/182000/M Double acting profile cylinders Ø mm Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO

More information

Hydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents

Hydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents Hydraulic cylinders Tie rod design Type CD / CG Features types of mounting Piston Ø (ØAL)... mm Piston rod Ø (ØMM) 12... 1 mm Stroke length up to 3 m Project planning software Interactive Catalog System

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

Series AM/MM/WM Mill Type Cylinders

Series AM/MM/WM Mill Type Cylinders ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the

More information

HYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1.

HYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1. HYDRO-PNEUMATICS 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series... 1.310 2) Hydro-Pneumatic Intensifiers for Machining Centers... 1.330 HYDRAULIC CYLINDERS 1) LH7 Series... 2.110/1 Std. Mounting

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different

More information

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5, ø2, ø2.5, ø3.25, ø4 NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S 76 85 95 P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

Series AHM Metric Hydraulic Cylinder

Series AHM Metric Hydraulic Cylinder Series AHM Metric Hydraulic Cylinder As a major supplier of pneumatic and hydraulic cylinders, Atlas Cylinders introduces the Series AHM metric hydraulic cylinder. Atlas Series AHM cylinders are designed

More information

CILINDROS STANDARD E SEMI-STANDARD

CILINDROS STANDARD E SEMI-STANDARD CILINDROS STANDARD E SEMI-STANDARD STANDARD AND SEMI STANDARD CILINDERS CILINDROS ESTÁNDAR Y SEMI ESTÁNDAR www.vmflex.pt CILINDROS STANDART / STANDARD CYLINDERS / CILINDROS ESTÁNDAR 46 SIMPLES EFEITO (S

More information

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F

More information

AUTOMATION PRODUCTS IN HYDRAULICS AND PNEUMATICS PNEUMATIC CYLINDERS

AUTOMATION PRODUCTS IN HYDRAULICS AND PNEUMATICS PNEUMATIC CYLINDERS AUTOMATION PRODUCTS IN HYDRAULICS AND PNEUMATICS PNEUMATIC CYLINDERS PNEUMATIC CYLINDERS SERIES LUTHRA ( Standard Heavy Duty Cylinders ) 1-9 SERIES T CYLINDER 10 ISO 6431 SERIES A Old version of ISO Dimensional

More information

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life. CTUTORS NFP Series luminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals djustable captive cushion needle Ecology cylinders meet OSH noise standards Constructed of the finest materials

More information

Guide blocks for ISO/VDMA cylinders

Guide blocks for ISO/VDMA cylinders Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

Tie rods cylinders to ISO standard Ø

Tie rods cylinders to ISO standard Ø Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Hydraulic cylinders Mill type design

Hydraulic cylinders Mill type design Hydraulic cylinders Mill type design RE 179/10.07 Replaces: 09.07 178 1/68 Series CDM1 / CGM1 / CSM1 Component series 2X Nominal pressure bar (16 MPa) Table of contents H4652 Contents Page Features 1 Technical

More information

CYLINDERS OPTIONS ACCESSORIES

CYLINDERS OPTIONS ACCESSORIES CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount

More information

ISO 6022 DIN Nominal operating pressure (continuous service) bar 250. Maximum operating pressure bar 320. Maximum speed (standard) m/s 0,5

ISO 6022 DIN Nominal operating pressure (continuous service) bar 250. Maximum operating pressure bar 320. Maximum speed (standard) m/s 0,5 71 /112 ED HC3 HYDRAULIC CYLINDERS HCK3 HYDRAULIC CYLINDERS ATEX 94/9/CE ISO 6022 DIN 24333 DESCRIPTION Double acting cylinders constructed in compliance with ISO 6022 and DIN 24333. The materials used

More information

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P Pistoia Tel.0573/ Fax 0573/

Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P Pistoia Tel.0573/ Fax 0573/ TECHNICAL AND DIMENSIONAL CATALOGUE EDITION N 1-04 Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P.51034 Pistoia Tel.0573/929163 Fax 0573/929190 E-mail: info@oleodinamicasabatini.it CAT-2004-I.doc

More information