NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"
|
|
- John Parrish
- 6 years ago
- Views:
Transcription
1 NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder Option uto Switch apable NM N
2 2 NFP Interchangeable ir ylinder Series N Improved cushion capacity Floating cushion seal design eliminates piston rod bouncing due to cracking pressure at beginning of stroke. ompact and lightweight design The square covers are made of an aluminum die-casting and provide a lower cost, lighterweight product. Increased kinetic energy absorption The absorption of kinetic energy has been increased by nearly 3% through increase cushion volume and the use of a new cushion seal. ø.5", ø2", ø2.5", ø3.25", ø4" Full port design llows for improved piston breakaway. Full range of NFP interchangeable mounting configurations Mounting dimensions are in accordance with NSI (NFP) T , Fluid Power Systems and products - Square Head Industrial ylinders - Mounting Dimensions. P 2 M2 2 S P95 NM N
3 NFP Interchangeable ylinder: Standard Type Double cting, Single od (Medium Duty) Series N Inch size: ø.5", ø2", ø2.5", ø3.25", ø4" 3 Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style Nil K W M Standard cylinder Non-rotating cylinder Double rod Male rod stud Mounting style B MX L MS F MF MF2 MS4 D MP2 T MT4 MP4 X S U MP MS2 MT MT2 N D B XB5 Basic style Foot style od side flange style Head side flange style Side tapped style Double detachable head side clevis style enter trunnion style Single detachable head side clevis style Double head side clevis style Side lug style od side trunnion style Head side trunnion style Mounting Bracket Part No. Bore size " 2" 2.5" 3.25" 4" 4 For larger bore sizes up to 32" bore. Please consult T: N34. Standard stroke Inches Stroke Hundredths of an inch How to Order od boot Nil None Nylon K Neoprene ir cushion Nil N H Both ends None Head end od end Option B5 B6 B7 B Oversized rod High temperature Low temperature Low speed Stainless steel piston rod djustable stroke/xtend djustable stroke/eturn Dual operation/double rod Dual operation/single rod Fluoro rubber seals With coil scraper 35 For special rod end modifications, please see page Number of auto switches Nil S 3 n 2 pcs. pcs. 3 pcs. n pcs. uto switch Nil Without auto switch For the applicable auto switch model, refer to the table on page uto switches are shipped together, (but not assembled.) Mounting bracket Bore size Part no. 5 (.5") 2 (2") 25 (2.5") 325 (3.25") 4 (4") Foot N-L5 N-L2 N-L25 N-L325 N-L4 Flange Double clevis (MP2) Single clevis N-F5 N-F2 N-F25 N-F325 N-D5 N-D2 N-D25 N-D325 N-5 N-2 N-25 N-325 N-F4 N-D4 N-4 Side lug Double clevis (MP) N-S5 N5 N-S2 N2 N-S25 N25 N-S325 N325 N-S4 N4 These kits are for standard single rod/double acting cylinders without options. For option kits, please contact your local SM sales office. One kit required per cylinder. The SM N expanded Series NFP Industrial Interchangeable Pneumatic ylinders are now available in bore sizes ranging from 5"-8" Medium Duty, and.5"-4" Heavy Duty. The N xpanded Series ylinders offer: eplaceable od land full range of NFP interchangeable mounting configurations. vailable in three construction types: luminum, Steel, and Stainless steel omposite fiber tube optional. Fully adjustable cushion For further information, please consult T: N34 or contact your local SM sales office
4 NFP Interchangeable ir ylinder Medium Duty Series Series N 4 Specifications Base Material/Surface Treatment Description Material Note over luminum alloy Silver paint Tube luminum alloy Hard alumite Seal Nitrile rubber PLD, PLP Piston rod arbon steel Hard chrom plating Piston luminum alloy hromate To calculate thrust forces not shown in the table, multiply operating pressure by piston area. How to use this table. Locate column with desired operating pressure. 2. Move down that column and locate the thrust value which is equal (or the next larger to the force to be delivered by the cylinder). 3. On that same line, locate in the first (left) column the bore size recommended for your application. Note) These are guide lines only, which must be substantiated using additional data specific to your application. To calculate pull forces not shown in the table, use the following formula: Pull Force = (Piston area od area) x Working pressure How to read this table. To find the force on the pull stroke, locate the required piston rod diameter in the left most column. 2. Moving to the right, locate the required working pressure. 3. Deduct the value shown at the intersection from the push stroke force value determined from the Push Stroke table. The resultant is the available pull stroke table. Fluid Lubrication Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting Type Non-rotating accuracy Standard ir Non-lube 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 in/s (5 to 5 mm/s) Double rod Non-rotating rod ir ir Non-lube Non-lube 25 psi (.75 MPa) 25 psi (.75 MPa) 8 psi (.6 MPa) 5 psi (. MPa) 4 to 4 F (5 to 6 ) to 4 F (5 to 6 ) 2 to 2 in/s (5 to 5 mm/s) ir cushion standard 2 to 2 in/s (5 to 5 mm/s) od and head side trunnion maximum operating pressure for 325 and 4 bore is up to 5 psi. Standard Stroke Bore size (in) Standard stroke Maximum stroke.5" 2", 2.5" 3.25", 4" Weight/luminum Tube Bore size (in) 5 (.5") 2 (2") 25 (2.5") 325 (3.25") 4 (4") Basic style Foot mounting style Basic Flange mounting style weight levis mounting style Trunnion mounting style dd l weight per each 2" of stroke Basic style, Foot style, od side flange style, Head side flange style, levis style, Side tapped style, enter trunnion style, Head side trunnion style, Side lug style, od side trunnion style N/, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2,, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28, For all mountings style ylinder Bore and Force: Push Stroke Bore size Piston area Force (lbs); Push stroke Operating medium pressure (PSI) (in) (in) ylinder Bore and Force: Pull Stroke Basic style, Foot style, Flange style, enter trunnion style, Side tapped style od side trunnion style Piston Piston Force (lbs); Pull stroke (Deduct the listed thrusts corresponding rod rod to the rod size from push stroke pressure) diameter area Operating medium pressure (psi) (in) (in) N/ Basic style, Foot style, levis style, od side flange style, Head side flange style, enter trunnion style, Side tapped style, Side lug style N/ (in) Please consult with SM. (lbs) P 2 M2 2 S P95 NM N
5 Series N 5 onstruction eplacement Parts No. Description q od cover w Head cover e ylinder tube r Piston rod t Piston y ushion ring u od bushing i ushion valve o Tie-rod! Tie-rod nut! etaining ring!2 od seal retainer!3 ushion seal!4 od seal!5 Piston seal!6 ushion valve seal!7 ylinder tube gasket!8 Piston gasket!9 Wear od jam nut omponents included in a seal kit. How to Order Seal Kit N W 5 Material luminum alloy luminum alloy luminum alloy arbon steel luminum alloy Brass Bronze casted arbon steel arbon steel arbon steel arbon steel arbon steel Urethan rubber NB NB NB NB NB esin arbon steel PS Option W K Single rod Double rod Non-rotating Bore Option B5 B6 B7 vailable for 5, 2 and 25 bores only. Use single rod designation when ordering X kit. Note: X seal kit order 2 single rod kits. Not available with W and K option Oversized rod High temperature Low temperature Dual operation/single rod 6-5-6
6 6 Series N uto Switch Specifications pplicable uto Switch/efer to page 6-6- for further information on auto switches. Type eed switch Solid state switch Special function Diagnosis indication (2-color) Diagnosis indication (2-color) Water resistant (2-color) Diagnosis output (2-color) With timer lectrical entry rommet rommet Note) Lead wire length symbols:.5 m Nil (xample) 53 3 m L (xample) 53L 5 m Z (xample) 53Z Indicator light es es Wiring (Output) 2-wire 3-wire (quiv. NPN) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 3-wire (NPN) 3-wire (PNP) 2-wire 4-wire (NPN) 3-wire (NPN) Load voltage D 24 V 2 V V, 2 V 5 V 2 V 2 V or less 24 V 5 V, 2 V 5 V, 2 V V, 2 V 2 V 5 V, 2 V 24 V 2 V 5 V, 2 V uto switch model W F59 F5P 5 59 F59W F5PW 59W F5BL F59F F5NTL Lead wire length (m) Note).5 (Nil) 3 (L) 5 (Z) onnector pplicable load PL elay, PL I circuit elay, PL PL I circuit I circuit I circuit Solid state auto switches marked with are produced upon receipt of order. elay, PL P 2 M2 2 S P95 NM N
7 Series N 7 Basic Style: NB (MX mounting style) ZB + Stroke 2- (NPTF) Bore size (in) MM B B D DD LF P ZB 5 (.5") 7/ /8 /8 9/6 / (2") 7/ /8 /8 9/6 5/ / (2.5") 7/ /8 /8 9/6 5/ /8 325 (3.25") -6 /8 3.9 /2 /2 /2 7/ / /4 5 53/64 4 (4") -6 /8 4.7 /2 /2 /2 7/ /2 / /4 5 53/64 Foot Style: NL (MS mounting style) falts Z + Stroke X + Stroke 2- (NPTF) H T ømm ømm S 6-B (Hole) O L F S + Stroke L O Bore size (in) MM B H L O T B B D DD F S P LF 5 (.5") 7/ /6 3/6 7/6 /8 /8 /8 9/6 / / (2") 7/ /6 7/6 9/6 /8 /8 /8 9/6 5/ / (2.5") 7/ /8 9/6 /8 /8 /8 9/6 5/ / (3.25") -6 /8 3.9 /2 3 3/6 5/6 /4 /64 /2 /2 /2 7/ / /4 4 (4") -6 /8 4.7 /2 4 /2 2 /4 /4 5/64 /2 /2 /2 7/8-24 4/2 / / /4 Bore size (in) S X Z 5 (.5") 2 (2") / /6 25 (2.5") 6 / /6 325 (3.25") 7 6 7/8 7 4 (4") 7 6 7/
8 NFP Interchangeable ir ylinder Medium Duty Series Series N 8 od Side Flange Style: NF (MF mounting style) 4-FB (Hole) 2- (NPTF) ømm P TF W F 2 UF ZB + Stroke M2 Bore size (in) MM 5 (.5") 7/ B /8 B /8 D 9/6 2.3 F FB 5/ TF 2 UF 3 W.7 LF 3 P 2.36 ZB 4 2 (2") 25 (2.5") 7/6-2 7/ /8 /8 /8 /8 9/6 9/6 2 / /8 4 / /8 325 (3.25") 4 (4") -6-6 /8 / /2 /2 /2 /2 /2 /2 7/8 7/8 3 4 /2 /2 /2 7/6 7/ /6 5 7/6 5 /2 6 / /4 4 /4 5 53/ /64 2 S Head Side Flange Style: N (MF2 mounting style) (NPTF) 4-FB (Hole) P95 NM N ømm TF 2- XF + Stroke F UF ZF + Stroke Bore size (in) MM B B D F FB TF UF P XF ZF 5 (.5") 7/ /8 /8 9/ / (2") 7/ /8 /8 9/6 2 / / (2.5") 7/ /8 /8 9/ / /8 325 (3.25") -6 /8 3.9 /2 /2 /2 7/8 3 /2 7/ /6 5 / /4 4 (4") -6 /8 4.7 /2 /2 /2 7/8 4 /2 /2 7/ /6 6 / /
9 Series N 9 Side Tapped Style: N (MS4 mounting style) 2- (NPTF) TN 4-NT Depth ND XT SN + Stroke ZB + Stroke Bore size (in) MM B B D DD /2 ND NT TN XT LF P SN ZB 5 (.5") 7/ /8 /8 9/6 / /32 /4-2 5/ /4 4 2 (2") 7/ /8 /8 9/6 5/ /2 / /6 5/6-8 7/8 5/ / (2.5") 7/ /8 /8 9/6 5/ / /32-6 /4 5/ /8 325 (3.25") -6 /8 3.9 /2 /2 /2 7/ /8 / /2-3 /2 2 7/ / /64 4 (4") -6 /8 4.7 /2 /2 /2 7/ /2 2 /4 / /2-3 2 /6 2 7/ / /64 Double Detachable Head Side levis Style: ND (MP2 mounting style) 2- (NPTF) F L D W W ømm /2 ømm XD + Stroke L M B ZD + Stroke Bore size (in) MM B B D W D DD F L L M XD LF P ZD 5 (.5") 7/ /8 /2 /2 9/6 / / /4 2 (2") 7/ /8 /2 /2 9/6 5/ / / /4 25 (2.5") 7/ /8 /2 /2 9/6 5/ /2 5 7/ (3.25") -6 /8 3.9 /2 /2 /4 7/ / /4 7 / /4 8 /4 4 (4") -6 /8 4.7 /2 /2 /4 7/ /2 / /4 7 / /4 8 /4 6-5-
10 NFP Interchangeable ir ylinder Medium Duty Series Series N Head Side Trunnion Style: N (MT2 mounting style) 2- (NPTF) ømm P ir cushion adj. øtd TL TL 2 M2 ZB + Stroke Bore size (in) MM B D DD TD. TL LF P ZB 5 (.5") 7/ /8 9/6 / (2") 7/ /8 9/6 5/ / (2.5") 7/ /8 9/6 5/ (3.25") -6 /8 3.9 /2 /2 7/ (4") -6 /8 4.7 /2 /2 7/ /2.3 /2.57 / /4 4 / /8 5 53/ /64 2 S od Side Trunnion Style: NU (MT mounting style) øtd ømm 2- (NPTF) P95 NM N ir cushion adj. 2- TL TL ZB + Stroke Bore size (in) MM B B D DD TD. TL LF P ZB 5 (.5") 7/ /8 /8 9/6 / (2") 7/ /8 /8 9/6 5/ / (2.5") 7/ /8 /8 9/6 5/ /8 325 (3.25") -6 /8 3.9 /2 /2 /2 7/ / /4 5 53/64 4 (4") -6 /8 4.7 /2 /2 /2 7/ /2 / /4 5 53/
11 Series N enter Trunnion Style: NT (MT4 mounting style) XI + /2 stroke 2- (NPTF) ømm TT Z Bore size (in) MM B B D DD TD. TL TM TT UM UV P LF XI ZP 5 (.5") 7/ /8 /8 9/6 / /2.8 4 / (2") 7/ /8 /8 9/6 5/ / (2.5") 7/ /8 /8 9/6 5/ /2.8 5 / /8 325 (3.25") -6 /8 3.9 /2 /2 /2 7/ / / / / /64 4 (4") -6 /8 4.7 /2 /2 /2 7/ /2 / / / / /64 Single Detachable Head Side levis Style: N (MP4 mounting style) 2- (NPTF) ød ømm L B F L M XD + Stroke ZD + Stroke Bore size (in) MM B B D D DD F L L M XD LF P ZD 5 (.5") 7/ /8 /2 9/6 / / /4 2 (2") 7/ /8 /2 9/6 5/ / / /4 25 (2.5") 7/ /8 /2 9/6 5/ /2 5 7/ (3.25") -6 /8 3.9 /2 /2 /4 7/ / /4 7 / /4 8 /4 4 (4") -6 /8 4.7 /2 /2 /4 7/ /2 / /4 7 / /4 8 /
12 NFP Interchangeable ir ylinder Medium Duty Series Series N 2 Double Head Side levis Style: NX (MP mounting style) 2- (NPTF) F S.H..S. ød L W W ømm P 2 ZB + Stroke XD + Stroke L M B M2 Bore size (in) MM B B D W D DD F L L M XD LF P ZB 5 (.5 ) 2 (2 ) 7/ /8 7/ /8 /2 /2 /2 /2 9/6 / /6 5/ / (2.5 ) 7/ /8 325 (3.25 ) -6 /8 3.9 /2 /2 /4 /2 /2 9/6 5/ / / /8 7 / / /8 5 53/64 S 4 (4 ) -6 /8 4.7 /2 /2 /4 7/ /2 / / /4 5 53/64 76 Side Lug Mounting Style: NS (MS2 mounting style) øsb Screw (4) Hole ZB + Stroke 2- (NPTF) P95 NM N ømm /2 ST TS US SW XS SU SS + Stroke SU SW S 2- Bore size (in) MM B D DD LF P SB SS ST SU SW S TS US XS ZB 5 (.5 ) 7/6-2 /8 9/6 / (2 ) 7/6-2 /8 9/6 5/ / (2.5 ) 7/6-2 /8 9/6 5/ (3.25 ) -6 /8 /2 /2 7/ / / / (4 ) -6 /8 /2 /2 7/ /2 / / /
13 NFP Interchangeable ylinder: Non-rotating od Double cting, Single od (Medium Duty) Series NK Inch size: ø.5", ø2", ø2.5" 3 How to Order ND K Mounting Bore Stroke Suffix x: NDKB5-4 uto switch capable Specifications od non-rotating accuracy: ±.5 uto switch mounting available Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient and fluid temperature Piston speed ushion otational torque range Non-rotating accuracy Mounting Standard Stroke Bore size (in) Standard stroke.5, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2 2, 2.5, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, ir 25 psi (.75 MPa) 5 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard 3.9 lbs. in or less ±.5 Basic style, Foot style, Flange style levis style, Side tapped style enter trunnion style, Side lug style 6-5-4
14 NFP Interchangeable ir ylinder Medium Duty Series Non-rotating od - Basic Style/Side Tapped Style: NKB (MX mounting style)/nk(mx4 mounting style) Series NK 4 TN 4-NT Depth ND ø.63 Bore size (in) B B D DD ND NT LF P ZB TN XT SN 5 (.5") 7/ /8 /8.55 / /32 / /6 2 /4 2 (2") 7/ /8 /8.55 5/ / /6 5/ /8 5/6 2 /4 25 (2.5") 7/ /8 /8.55 5/ / /8 /4 5/ (NPTF) XT SN + Stroke ZB + Stroke P 2 M2 2 S P95 NM N
15 Series NK 5 Non-rotating od-foot Style: NKL (MS mounting style) Z + Stroke X + Stroke 2- (NPTF) T H ø.63 O L F L O S + Stroke Bore size (in) B H L O T B B D DD F S P LF S X Z 5 (.5") 7/ /6 3/6 7/6 /8 /8 /8.55 / / (2") 7/ /6 7/6 9/6 /8 /8 /8.55 5/ (2.5") 7/ /8 9/6 /8 /8 /8.55 5/ / / Non-rotating od-od Side Flange Style: NKF (MF mounting style) 4-øFB (Hole) W 2- (NPTF) F ZB + Stroke Bore size (in) B B D DD F FB TF UF W LF P ZB 5 (.5") 7/ /8 /8.55 / / (2") 7/ /8 /8.55 5/ / (2.5") 7/ /8 /8.55 5/ / /8 Non-rotating od-head Side Flange Style: NK (MF2 mounting style) 2- (NPTF) 4-øFB (Hole) ø.63 ø.63 S 6-øB (Hole) TF UF F TF XF + Stroke UF ZB + Stroke Bore size (in) B B D DD F FB TF UF P XF ZF 5 (.5") 7/ /8 /8.55 / / (2") 7/ /8 /8.55 5/ / (2.5") 7/ /8 /8.55 5/ / /
16 NFP Interchangeable ir ylinder Medium Duty Series Series NK 6 Non-rotating od-double Detachable Head Side levis Style: NKD (MP2 mounting style) 2- (NPTF) ød ø.63 Bore size (in) B 5 (.5") 7/ /8 2 (2") 25 (2.5") 7/6-2 7/ /8 /8 B D /2 /2 /2 W /2 /2 /2 D DD /4-28 5/6-24 5/ Bore size (in) B B D DD TD. TL TM TT UM UV P LF XI ZB 5 (.5") 7/ /8 /8.55 / (2") 7/ /8 /8.55 5/ (2.5") 7/ /8 /8.55 5/ /8.3.3 F L L M /2 /2 /2 Non-rotating od-enter Trunnion Style: NKT (MT4 mounting style) ø.63 XD + Stroke ZD + Stroke F XI + /2 Stroke L W B L M 2- (NPTF) W XD /8 TT ZB + Stroke LF P ZD 6 /4 6 /4 6 P 2 M2 2 S P95 NM N
17 NFP Interchangeable ylinder: Standard Type Double cting, Double od (Medium Duty) Series NW Inch size: ø.5", ø2", ø2.5", ø3.25", ø4" 7 How to Order NDW Mounting Bore Stroke Suffix x: NDWB 5-4 uto switch capable Double rod Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style enter trunnion style, od side trunnion style, Side tapped style Standard with air cushion uto switch mounting available Standard Stroke Bore size (in).5 Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2 2, 2.5, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, , 4, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24,
18 NFP Interchangeable ir ylinder Medium Duty Series Double od-basic Style/Side Tapped Style: NWB (MX mounting style)/nw (MX4 mounting style) Series NW 8 P 2 M2 Bore size (in) MM B D DD K LD P ZM XT SD 5 (.5") 7/ /8 9/6 / /6.9 2 (2") 7/ /8 9/6 5/ / / (2.5") 7/ /8 9/6 5/ / (3.25") -6 /8 3.9 /2 /2 7/ / / (4") -6 /8 4.7 /2 /2 7/ /2 / / S P95 NM N
19 Series NW 9 Double od-foot Style: NWL (MS mounting style) ZM + 2 stroke 2- (NPTF) + Stroke + Stroke falts falts 6-øB (Hole) LD + Stroke SL + Stroke Bore size (in) MM B H L O T B D DD K S P LD SL ZM 5 (.5") 7/ /6 3/6 7/6 /8 /8 9/6 / / (2") 7/ /6 7/6 9/6 /8 /8 9/6 5/ (2.5") 325 (3.25") 7/ / /2 3 /8 9/6 /8 /8 3 3/6 5/6 /4 /64 /2 9/6 5/ /2 7/ / / (4") -6 /8 4.7 /2 4 /2 2 /4 /4 5/64 /2 /2 7/ / / Double od-od Side Flange Style: N (MF mounting style) 4-øFB (Hole) 2- (NPTF) + Stroke falts falts LD + Stroke ZM + 2 Stroke + Stroke Bore size (in) MM B D DD F FB K TF UF W LD P ZM 5 (.5") 7/ /8 9/6 / / (2") 7/ /8 9/6 5/ / (2.5") 7/ /8 9/6 5/ / (3.25") -6 /8 3.9 /2 /2 7/ /2 7/ /6 5 / (4") -6 /8 4.7 /2 /2 7/ /2 7/ /6 6 /
20 NFP Interchangeable ir ylinder Medium Duty Series Series NW 2 Double od-enter Trunnion Style: NWT (MT4 mounting style) falts XI + /2 stroke 2- (NPTF) + Stroke falts P Bore size (in) MM 5 (.5") 2 (2") 25 (2.5") 325 (3.25") 4 (4") 7/6-2 7/6-2 7/ /8 /8 B 2.2 /8 2.6 /8 3. /8 3.9 /2 4.7 /2 /2 /2 D DD 9/6 /4-28 9/6 5/6-24 9/6 5/6-24 7/8-24 7/ /2 / Bore size (in) MM B D DD K TD. TL LD P ZM 5 (.5") 7/ /8 9/6 / (2") 7/ /8 9/6 5/ (2.5") 7/ /8 9/6 5/ (3.25") -6 /8 3.9 /2 /2 7/ / (4") -6 /8 4.7 /2 /2 7/ / K TD. TL TM TT UM UV Double od - od Side Trunnion Style: NWU (MT mounting style) TD. falts ir cushion adj. LD + Stroke ZM + 2 stroke ZM + 2 stroke 2- (NPTF) LD + Stroke + Stroke P Stroke + Stroke LD XI falts ZM M2 2 S P95 NM N
21 Series N 2 od Boot od Boot Material Suffix for option Material Nylon K Neoprene Max. temperature is for boot only. Max. temperature 4 F (6 ) 23 F ( ) How to Order N D Mounting Bore Stroke Suffix Boot od boots are used to protect the surface of a piston rod in harsh environments. x: NDB5-2 uto switch capable od boot Nylon rod boot K Neoprene rod boot od Boot Dimensions Bore size L (in) Ø F to 2 2. to 4 4. to 6 6. to 8 8. to. to 2 2. to 4 4. to 6 6. to 2 2. to to 28 5 (.5") (2") (2.5") (2.25") (4") Bore size Wf (in) to 2 2. to 4 4. to 6 6. to 8 8. to. to 2 2. to 4 4. to 6 6. to 2 2. to to 28 5 (.5") (2") (2.5") (2.25") (4") Bore size ZB (in) to 2 2. to 4 4. to 6 6. to 8 8. to. to 2 2. to 4 4. to 6 6. to 2 2. to to 28 5 (.5") (2") (2.5") (2.25") (4")
22 Series N 22 Stainless Steel od Stainless steel piston rod is used to protect in harsh or wet environments. uto switch mounting available. Low Speed Smooth movements even at.4 to 2 inch/sec uto switch mounting available. Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure od material mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , 4 Specifications ir 25 psi (.75 MPa) 8 psi (.6 MPa) Stainless steel 34 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style enter trunnion style, Side tapped style, levis style od side trunnion style, Head side trunnion style Side lug style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N D Mounting Bore Stroke Suffix X6 x: NDB 5-46 uto switch capable Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , 4 Stainless steel rod ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ).4 to 2 inch/sec ( to 5 mm/sec) None Basic style, Foot style, Flange style enter trunnion style, Side tapped style, levis style od side trunnion style, Head side trunnion style Side lug style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N D Mounting Bore Stroke N x: NDB 5-4NB9 uto switch capable Low friction/low speed XB9 Standard P 2 M2 2 S P95 NM N
23 Series N 23 High Temperature Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Seal material Piston speed ushion Mounting ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 3 F ( to 5 ) Fluoro rubber 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style enter trunnion style, Side tapped style, levis style od side trunnion style, Head side trunnion style Side lug style Use at high temperature up to 3 F. Standard Stroke Bore size (in).5 2, , 4 Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N Mounting Bore Stroke Suffix XB6 x: NB 5-4B6 uto switch capable not available High temperature Low Temperature Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Seal material Piston speed ushion Mounting ir 25 psi (.75 MPa) 8 psi (.6 MPa) 22 to 4 F ( 3 to 6 ) Low durometer nitril rubber 2 to 2 inch/sec (5 to 5 mm/sec) None Basic style, Foot style, Flange style enter trunnion style, Side tapped style, levis style od side trunnion style, Head side trunnion style Side lug style Use at low temperature down to 22 F. Standard Stroke Bore size (in).5 2, , 4 Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N Mounting Bore Stroke N XB7 x: NB 5-4NB7 Low temperature Standard uto switch capable not available
24 Series N 24 Oversized od Bore size (in) MM B B D DD Specifications ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style, enter trunnion style, Side tapped style N D Mounting Bore Stroke Suffix XB5 2 (2") -6 /8 2.6 /2 /8 /2 7/8 5/ / /6 5/6-8 7/8 25 (2.5") -6 /8 3. /2 /8 /2 7/8 5/ /32-8 /4 325 (3.25") /2 / / /2-3 /2 4 (4") /2 / / /2-3 2 /6 Bore size (inch) Fluid Max.operating pressure Min.operating pressure mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in) 2, , 4 Oversized od-basic Style: NB (XB5) 4-NT Depth ND F Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order Oversized od/standard x: NDB 25-2B5 uto switch capable ND NT Oversized/rod 2- (NPTF) SN + Stroke ZB + Stroke TN XT 2 5/6 2 5/6 2 /6 2 /6 LF / /4 P SN 2 / ZB 5 /8 5 /4 6 5/64 6 5/64 P 2 M2 2 S P95 NM N
25 Series N 25 Oversized od-foot Style: NL (XB5) Z + Stroke X + Stroke 2- (NPTF) B MM T H B S 6-B (Hole) O L F S + Stroke L O Bore size (in) MM 2 (2") B H -6 / /6 7/6 L O T 9/6 /8 B B D DD F S P LF S X Z /2 /8 /2 7/8 5/ / /6 25 (2.5") -6 / /8 9/6 /8 /2 /8 /2 7/8 5/ / /8 6 /8 6 /6 325 (3.25") /2 3 3/6 5/6 /4 /64 2 /2 / / /4 7 7 /8 7 7/8 4 (4") /2 4 /2 2 /4 /4 5/64 2 /2 / /2 / / /4 7 7 /8 7 7/8 Oversized od-od Side Flange Style: NF (XB5) 4-øFB (Hole) 2- (NPTF) ømm TF UF W F ZB + Stroke Bore size (in) MM B B D DD F FB TF UF W LF P ZB 2 (2") -6 /8 2.6 /2 /8 /2 7/8 5/ / /8 25 (2.5") -6 /8 3. /2 /8 /2 7/8 5/ / /4 325 (3.25") /2 / /2 7/ /6 5 /2 4 / /64 4 (4") /2 / /2 7/ /6 6 /4 4 / /
26 Series N 26 Oversized od-head Side Flange Style N (XB5) 2- (NPTF) 4-øFB (Hole) ømm Bore size (in) MM B B D DD F F TF UF P XF ZF 2 (2") -6 /8 2.6 /2 /8 /2 7/8 5/ / (2.5") -6 /8 3. /2 /8 /2 7/8 5/ / /8 5 /2 325 (3.25") /2 / / /6 5 / /8 6 /2 4 (4") /2 / / /6 6 / /8 6 /2 Oversized od-enter Trunnion Style: NT (XB5) UV F F UM XF + Stroke ZF + Stroke /32. øtd TL TM TL MM F XI + /2 stroke 2- (NPTF) TF UF TT ZB + Stroke B P 2 M2 2 S P95 NM N 2- Bore size (in) MM B B D DD F TD. TL TM TT UM UV LF P XI ZB 2 (2") -6 /8 2.6 /2 /8 /2 7/8 5/ / /8 25 (2.5") -6 /8 3. /2 /8 /2 7/8 5/ /2.8 5 / /4 325 (3.25") /2 / / / / / /64 4 (4") /2 / /2 / / / / /
27 Series N 27 Oversized od-double Detachable Head Side levis Style: ND (XB5) 2- (NPTF) L ød ømm F XD + Stroke ZD + Stroke F L M W B W Bore size (in) MM B B D W D DD F F L L M XD LF P ZD 2 (2") -6 /8 2.6 /2 /2 /2 /2 7/8 5/ /2 6 / (2.5") -6 /8 3. /2 /2 /2 /2 7/8 5/ /2 6 / (3.25") /4 / / / /4 8 /2 4 (4") /4 / / / /4 8 /2 Oversized od-double Single Detachable Head Side levis Style: N (XB5) 2- (NPTF) L ømm ød F XD + Stroke ZD + Stroke F L M B Bore size (in) MM B B D D DD F F L L M XD LF P ZD 2 (2") -6 /8 2.6 /2 /2 /2 7/8 5/ /2 6 / (2.5") -6 /8 3. /2 /2 /2 7/8 5/ /2 6 / (3.25") /4 / / / /4 8 /2 4 (4") /4 / / / /4 8 /
28 Series N 28 djustable Strokextended The extended stroke stop position is infinately adjustable within the adjustment range. uto switch capable. Dimensions 4-NT Depth ND Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , 4 LD + Stroke 2- (NPTF) SN + Stroke ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style, enter trunnion style, Side tapped style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N D B 5 4 uto switch ZZ + 2 stroke + djustable range (: ", B: 2") Mounting Bore size Stroke Stroke djustment range : to " B: to 2" d + Stroke + djustable range X8 djustable strokextend c + djustable range P 2 M2 2 S P95 NM N 2- Bore size (in) MM B D DD K LD P ZZ 5 (.5") 7/ /8 9/6 / / (2") 7/ /8 9/6 5/ / / (2.5") 7/ /8 9/6 5/ / (3.25") -6 /8 3.9 /2 /2 7/ / / (4") -6 /8 4.7 /2 /2 7/ /2 / / Bore size (in) b c d SN NT ND TN XT 5 (.5") / /4 /4-2 9/32 5/6 2 (2") 2/ /4 5/6-8 7/6 7/8 5/6 25 (2.5") 2/ /32 /4 5/6 325 (3.25") 2 9/ /2-3 /2 2 7/6 4 (4") 2 9/ /2-3 2 /6 2 7/
29 Series N 29 djustable Strokeeturn Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style, enter trunnion style, Side tapped style The return stroke stop position is infinitely adjustable within the adjustment range. uto switch capable. Standard Stroke Bore size (in).5 2, , 4 Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N D B 5 4 X9 Dimensions uto switch Mounting Bore size djustment range : to " B: to 2" Stroke djustable Strokeeturn (2) (NPTF) 4-NT Depth ND SN + Stroke ZZ + Stroke + djustable range d + djustable range Bore size (in) MM B D DD K LF P ZZ TN XT SN d mm 5 (.5") 7/ /8 9/6 / /32 9/ /6 2 /4.8 M6x.5 2 (2") 7/ /8 9/6 5/ / /32 / /8 5/6 2 /4.8 M6x.5 25 (2.5") 7/ /8 9/6 5/ /32 / /4 5/ M6x (3.25") -6 /8 3.9 /2 /2 7/ / / /4 8.2 /2 2 7/ M24x.5 4 (4") -6 /8 4.7 /2 /2 7/ /2 / / / /6 2 7/ M24x.5 Bore size (in) NT ND 5 (.5") /4-2 9/32 2 (2") 5/6-8 7/6 25 (2.5") -6 9/ (3.25") /2-3 4 (4") /
30 Series N 3 Dual OperationDouble od 4 positions available from a single cylinder uto switch capable Dimensions 4-NT Depth ND Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , 4 N D B 5 4 N uto switch Bore size Mounting Stroke P + stroke 4- (NPTF) Stroke ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style, Side tapped style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 Stroke B SN + Stroke ( + B) LD + Stroke ( + B) ZZ + Stroke ( + B) How to Order P + stroke B 2 X Stroke B ushion Both ends N W/o cushions H Head end od end Dual operation - Double rod P 2 M2 2 S P95 NM N 2- Bore size (in) MM B D DD K LD P P ZZ SN 5 (.5") 7/ /8 9/6 / / (2") 7/ /8 9/6 5/ / / (2.5") 7/ /8 9/6 5/ / (3.25") -6 /8 3.9 /2 /2 7/ / / (4") -6 /8 4.7 /2 /2 7/ /2 / / Bore size (in) TN XT NT ND 5 (.5") 5/6 /4-2 9/32 2 (2") 7/8 5/6 5/6-8 7/6 25 (2.5") /4 5/6-6 9/ (3.25") /2 2 7/6 /2-3 4 (4") 2 /6 2 7/6 /
31 Series N 3 Dual OperationSingle od 3 positions can be obtained from a single cylinder. Twice the force is available for the extended stroke. uto switch capable Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style, levis style, Side tapped style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 xample: NDB5-2+3 will stroke 2" then an additional 3" for a total stroke of 5". The front cylinder B (rod end) must be equal to 5" to allow the full stroke. How to Order N D B H X Dimensions uto switch Bore size Mounting Stroke Stroke B- Dual operation- Single rod ushion Both ends N W/o cushions H Head end od end P + Stroke B 4- (NPTF) PB + Stroke 4-NT Depth ND Stroke B Stroke SN + Stroke + Stroke B + Stroke B ZB + Stroke + Stroke B Bore size (in) MM B B D DD TN XT LF P PB P 5 (.5") 7/ /8 /8 9/6 / / (2") 7/ /8 /8 9/6 5/ /8 5/ (2.5") 7/ /8 /8 9/6 5/ /4 5/6 / (3.25") -6 /8 3.9 /2 /2 /2 7/ / /2 2 7/ (4") -6 /8 4.7 /2 /2 /2 7/ / /6 2 7/ Bore size (in) SN ZB NT ND 5 (.5") /4-2 9/32 2 (2") /6-8 7/6 25 (2.5") / (3.25") /2-3 4 (4") /
32 Series N 32 Fluoro ubber Seals Material for seals is changed to fluoro rubber excellent in chemical resistance. With oil Scraper Scraper removes frost, weld spatter, cutting dust, and etc., and it protects the seals. Specifications Bore size (inch) Fluid Max. operating pressure Min. operating pressure od material mbient & fluid temperature Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , 4 Specifications ir 25 psi (.75 MPa) 8 psi (.6 MPa) Stainless steel 34 4 to 4 F (5 to 6 ) 2 to 2 inch/sec (5 to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style enter trunnion style, Side tapped style, levis style od side trunnion style, Head side trunnion style Side lug style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 How to Order N D Mounting Bore Stroke Suffix X22 x: NDB uto switch capable Bore size (inch) Fluid Max. operating pressure Min. operating pressure mbient & fluid temperature Scraper Piston speed ushion Mounting Standard Stroke Bore size (in).5 2, , 4 Fluoro rubber seals ir 25 psi (.75 MPa) 8 psi (.6 MPa) 4 to 4 F (5 to 6 ) oil scraper (Metal).4 to 2 inch/sec ( to 5 mm/sec) ir cushion standard Basic style, Foot style, Flange style enter trunnion style, Side tapped style, levis style od side trunnion style, Head side trunnion style Side lug style Standard stroke, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 2, 3, 4, 5, 6, 8,, 2, 4, 6, 8, 2, 24, 28 P 2 M2 2 S P95 NM N 2- How to Order N D Mounting Bore Stroke X35 x: NDB uto switch capable With coil scraper
33 D dia. Series N 33 ccessory Bracket Dimensions ye Bracket Part no. B D DD F FL L M M N-P5 /2 3/32 2 /2 /8 /2 9/6.63 N-P325 /4 7/32 3 /2 7/8 /4 7/ DD dia. levis Bracket Part no. B B D W DD F FL L M M N-B /2 / /2 /8 /2 /2 9/6 N-B /6.265 /2-2 3 /2 7/8 /6 /6 DD dia. od levis Part no. B D H W F L N /2 /2 7/6-2 /2 N /4 /4 /8-6 D dia. D dia. Order to Match od Thread od ye Pivot Pin Pivot Pin Part no. B D NI-5 /2 /2 7/6 2 NI-325 /8 2 /6 /4 7/8-6 Part no. D L N-5 /2 7/8 N Tap through Part no. D D 2 L P NDP NDP Note) otter pins are included. 2 x D D dia. Note) otter pins are included
34 Series N 34 uto Switch Specifications How to Order uto Switches rommet type D - onnector type D - P For standard part number please refer to applicable auto switches on page Lead wire color 2 pin 3 pin Brown Orange Lead wire length S.5 (m)(.64 ft) M. (m)(3.28 ft) onnector type M8-3 pins B M8-4 pins D M2-4 pins onnector type M8-3 pin M8-4 pin M2-4 pin Sensor type D 2-wire D 2-wire non-polar D 3-wire D 4-wire Lead wire length.5 (m) (.64 ft) L 3 (m) (9.84 ft) Z 5 (m) (6.4 ft) uto Switch Mounting Bracket Part No. Bore size (in) Model no. 5, F5 6, 5 5 (.5") 2 (2") 25 (2.5") 325 (3/25") 4 (4") NBT-5 NBT-2 NBT-2 NBT-325 NBT-325 Pin arrangement pplicable standards Impact resistant IP degress of protection Insulation resistance Withstand voltage pin Brown Brown Brown onnector M8-3 pin/4 pin 4 3 Blue Blue 4 pin Blue Blue Black Black For standard part number please refer to applicable auto switches on page pin OUT (+) D (+) D (+) 2 3 IS 4524, IS 4525, I , N 42 3 m/s 2 IP-67 (I529 standard) MΩ or more at 5 VD meg. 5 V minute (between contacts), Leakage current m or less Meaning of contact no. 2 pin 3 pin Diagnostic output 4 4 pin OUT ( ) OUT (±) OUT ( ) D ( ) OUT D ( ) OUT ± Unit : mm ( ) : ft P 2 M2 2 S P95 NM N 2- Sensor M2-4 pin Lead wire length 3.4 (.) ø (.3) Sensor Lead wire length 44 (.4) ø4 (.5)
Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
More informationInch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400
NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationMEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI
AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed
More informationAZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More information% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing
More informationSeries LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00
Series L Industrial Interchangeable Pneumatic ylinders atalog L- 0/00 Model Numbers Lin-ct Series L Series L Model Numbers How to Develop Them How to Decode Them Lin-ct Series L cylinders can be completely
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationFeatures. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More information10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
More informationAL4 Series Air Cylinder
L Series ir ylinder atalog M097- February, 00 Up to 0 PSI Bore Sizes -/" through 8" NFP Interchangeable 7 Standard Mounting Styles Series ylinders Up to 0 PSI Permanently lubricated BT & BTM Series ylinders
More informationIndustrial Cylinder Products. Pneumatic & Hydraulic Cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Industrial ylinder Products Pneumatic & Hydraulic ylinders In line
More informationFULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationPneumatic Cylinders NFPA Series
Pneumatic Cylinders NFPA Series INDEX: General characteristics 3 Mounting styles 5 Piston rod characteristics (bore diam 25/150) 6 Single rod cylinder dimensions (bore diam 25/150) 8 Piston rod characteristics
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More informationwiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.
CTUTORS NFP Series luminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals djustable captive cushion needle Ecology cylinders meet OSH noise standards Constructed of the finest materials
More informationParker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
More information1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
More informationSERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
More informationSpecification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature
MM series MINITURE YLINDER Features Non lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a
More informationPL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
More informationMiller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011
Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationSeries C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
More information15% Weight reduced. Cycle time shortened. Lightweight. CP96 Series. ISO Cylinder ISO Standard (15552)
ISO ylinder ISO Standard (15552) P96 Series ø32, ø40, ø50, ø63, ø80, ø100 RoS 85 Lightweight Up * ompared with the previous P96 series (ø40, 100 mm stroke) 15% Weight reduced By adopting a new cushion
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More information7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H
7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations
More information15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More information10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125
ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the
More informationIndustrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationHygienic Design Cylinder
ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material
More informationSERIES TA (NFPA) CYLINDER
Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder
More informationKing Of Valve Co.,Ltd.
Series variation Series Series Series variation SCP* SCP* U Variation Double acting lubrication type Double acting oil-free type, with switch Double acting Stroke adjustable type (Extended) Double acting
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationCAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP
CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types
More informationSeries CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
More information15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to
Air ylinder A Series ø40, ø50, ø63, ø80, ø100 RoHS Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to (ø50-50 stroke) 15% lighter 1.31kg Easy air cushion control
More informationSeries MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port
Parallel Type ir Gripper How to Order 1 1 2 Bore size mm 1mm 1mm 2mm mm MHZJ2 1 D F9PV Number of fingers 2 2 fingers D S C ction Double acting Single acting (normally open) Single acting (normally closed)
More informationAir Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.
Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series
More information10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.
ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape
More informationAir/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
More information3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
More informationCATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES
HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC
More informationA Series Aluminum NFPA Interchangeable Cylinder Line
Series luminum NFP Interchangeable Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Basic No Mount Cylinder Dimensions 6 Rod End Dimensions
More informationSERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC
CYLINDERS, INC SERIES 3000 3000 PSI 5000 PSI NON SHOCK PURAKAL 1234 345 4567 6789 8901 0123 23 PURAKAL 1234567 HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S.Danebo Ave. Eugene, OR 97402-0414
More informationTABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D
HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationReduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
More informationSERIES HH (NFPA) CYLINDER
HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic
More information1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
More informationAir Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A
ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,
More informationT-MAC CYLINDERS, INC.
T-MAC CYLINDERS, INC. HEAVY DUTY ALUMINUM CYLINDERS AND ACCESSORIES HIGH QUALITY, DEPENDABLE, NFPA INTERCHANGEABLE CYLINDERS - MADE IN THE USA. 9014 SWANSON DRIVE ROSCOE, IL 61073 PHONE: 815-877-7090 FAX:
More information3 times the allowable moment of inertia
otary lamp ylinder Series Double Guide Type otation mechanism uses guide rollers. otation mechanism Non-rotating accuracy: ±0.9 ±0. (lamp part) Values for ø3, ø. omparison with our series otation angle:
More informationISO15552 Cylinders ø32, ø40, ø50, ø63, ø80, ø100, ø125
ISO2 Cylinders ø, ø, ø, ø, ø, ø0, ø CNOMO and circular grooves are on all four sides. Switch can be slid in. Reduced weight due a change in the configuration of the cover Small sized D-M au switch mountable
More informationSpecification. Tube I.D Port size Rc1/8 Rc1/4. Medium. Ambient temperature. Lubricator
series MIITURE YLIDER eatures on lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a high resistance
More informationSeries CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
More informationTaskMaster Pneumatic Cylinder
TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles
More informationCompact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
More informationSeries RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly
More informationAir Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.
Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 M G M M A S S Series
More information250 psi rating. series. pneumatic cylinders. bulletin 0606ST.
20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationSpecification. Model MCQV2 MCQV. Tube I.D. (mm) 32,40 50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
MQV / MQV2 series ISO-VDM STNDRD YLINDR Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes
More informationOptions selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
More informationRM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationLube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube
Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series 5 548 M M3 G G3 JM M
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More information7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H
" & " ore zcy0 High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For Division Plant Locations See Page II. 65
More information22mm Space required between the bottom of the cylinder body and your equipment is reduced.
Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner
More informationCylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
More informationFeatures. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More information17% Weight. ISO Cylinder. Cycle time shortened. Lightweight. reduced. Series C96 CAT.ES20-242B
ISO Cylinder ø32, ø40, ø50, ø63, ø80, ø100 Lightweight New series added Standard type, Double rod: Series C96-W Non-rotating rod type, Single rod: Series C96K Double rod: Series C96K-W Smooth Cylinder:
More informationHYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI
HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing
More informationPosition locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
More informationHH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationHigh Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual
High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationCYLINDERS OPTIONS ACCESSORIES
CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount
More informationHydraulic Cylinder NFPA Industrial Type
Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More information3MA/4MA Series Non-Lube NFPA Air Cylinders
MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8
More information1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.
Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
More information