Series 83. Stainless Steel Mini Cylinder

Save this PDF as:
Size: px
Start display at page:

Download "Series 83. Stainless Steel Mini Cylinder"

Transcription

1 Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action /4" Out IN /8" Out IN /16" Out IN /4" Out IN /2" Out IN IDEAL FOR THE PHARMACEUTICAL AND FOOD INDUSTRIES - For compressed air - Ideal for the pharmaceutical,food and dairy industries - Superior quality cylinders - Bumper integrated into piston - Interchangeable with most of well-known brands - Single or double acting cylinders available - Tube made of polished low friction stainless steel - Magnetic actuator built into piston available upon request - Magnetic actuator standard on 7/8 & 1-1/4 bore Maximum Working Pressure 250 PSI Working Temperature 5 C to 60 C (40 F to 140 F) For any questions or information about compressed air you may contact us at Tel. : Fax : or visit our web site at Lubrication Not required (Factory Lubricated) Construction Body : Stainless Steel Rod : 3/4" and 7/8" : Stainless Steel 1-1/16" to 1-1/2" : Carbon Steel Piston and Seal: Aluminum Alloy Spring (Single Action): Tempered Steel Seals : NBR Bumper: Urethane AIRMAX 223

2 Stainless Steel Mini Cylinders SINGLE ACTING - FRONT NOSE MOUNTING (WITH SPRING RETURN) Stroke Size (in.) 3/4" 7/8" 1-1/16" 1-1/4" 1-1/2" 1/ (in.) MM KK A B D E K NC NE NN W ZB ZC 3/ / / / / / / / / / / / / / / Model A SINGLE ACTING - UNIVERSAL MOUNTING (WITH SPRING RETURN) Model A Model B Model B Available in 1-1/2 only Stroke Size (in.) 3/4" 7/8" 1-1/16" 1-1/4" 1-1/2" 1-1/2 1/ C C C C C C C C C C C C (in.) MM KK A B D E F FF G K L LB NN W YC ZB ZC 3/ / / / / / / / / / / / / / / / / / / AIRMAX

3 Stainless Steel Mini Cylinders DOUBLE ACTING - FRONT NOSE MOUNTING Stroke Size (in.) 3/4" 7/8" 1-1/16" 1-1/4" 1-1/2" 1/ (in.) MM KK A B D E K N NC NE NN W Y ZB 3/ / / / / / / / / / / / / / / DOUBLE ACTING - UNIVERSAL MOUNTING Model A Model B Stroke Size (in.) 3/4" 7/8" 1-1/16" 1-1/4" 1-1/2"* 1-1/2 1/ C C C C C C C C C C C C C C C C * Model A, 1-1/2 - No hole for fixing a rear pivot Model A Model B Available in 1-1/ 2 only (in.) MM KK A B D E F G K L LB N NN W Y YC ZB 3/ / / / / / / / / / / / / / / AIRMAX 225

4 Accessories for Mini Cylinders FOOT BRACKET (SCREW INCLUDED) Part No. Applicable Size (In.) /4, 7/8 and 1-1/ /4 and 1-1/2 (in.) A B C D E F G H J 3/4, 7/8, 1-1/ /4, 1-1/ PIVOT BRACKET (ROD AND SPLIT PIN INCLUDED) Part No. Applicable Size (In.) /4, 7/8 and 1-1/ /4 and 1-1/ /2 Universal (in.) A B C D E F G H J K L M N 3/4, 7/8, 1-1/ /4, 1-1/ /2 Universal ROD CLEVIS (NUT, ROD AND SPLIT PIN INCLUDED) Part No. Applicable Size (In.) /4, 7/ / /4, 1-1/2 (in.) A B C D E F G H J K L 3/4, 7/ / / / / / /4, 1-1/ / /16-20 MOUNTING NUT (NOSE MOUNT THREAD) JAM NUT (ROD THREAD) Part No. Applicable Size (In.) /4, 7/8 and 1-1/ /4 and 1-1/2 Part No /4, 7/ / /4, 1-1/2 Applicable Size (In.) 226 AIRMAX

5 Accessories for Mini Cylinders MAGNETIC AUTO SWITCH REED SWITCH MOUNTING BAND Part Indicator Part No. No. light Voltage No. Size Yes 24 vdc 100 vac 200 vac /4 7/8 1-1/ No 24 vdc 24 vac 100 vac /4 1-1/2 200 vac PROPER AUTO SWITCH LOCATION (IN.) Front nose mounting Mounting strap A B1 B2 Approx. HS 3/ / / / / Universal mounting - Enables exact control of cylinder movement - Attaches to cylinder with mounting strap - Cylinder must be equiped with a magnetically actuated piston - Available as an option with Airmax mini cylinders Port side SELF ALIGNING COUPLER Protects against cylinder misalignment Part No. Size /4 & 7/ / /4 & 1-1/2 - Enables automatic alignment of the rod and the attachment point - Prolongs cylinder life by avoiding lateral stress induced by poor alignment - Allows up to 5 degree axial correction - Not recommended for rotar y applications Part No. A B C D E1 E2 F G H K M /4-28 UNF /16-24 UNF /16-20 UNF AIRMAX 227

6 250 PSI NFPA Pneumatic Cylinders Integrated magnetic activator and air cushions - For compressed air - For industries, agriculture, robotics and production equipment - NFPA Interchangeable - Integrated air cushions - Superior quality cylinders - Interchangeable with major brands of cylinders - Low friction polished aluminum tube - Standard lateral tap (Type MXO and MS4) - Piston integrated magnetic activator THEORETICAL CYLINDER FORCE (LBS). Operating pressures (PSI) Size (In.) Action /2 Out IN Out IN /2 Out IN /4 Out IN Out IN Out IN IDEAL FOR INDUSTRIAL AUTOMATION Maximum Working Pressure 250 PSI Minimum Working Pressure 7 PSI Working Temperature 5 C to 60 C (40 F to 140 F) Lubrication Not required (Factory Lubricated) Construction Body : Aluminum Alloy Rod : Chromed Steel Piston and Seal: Aluminum Alloy Seal : Nitrile Rubber (NBR) For any questions or information about compressed air you may contact us at Tel. : Fax : or visit our web site at AIRMAX

7 250 PSI NFPA Pneumatic Cylinders NFPA CYLINDERS Part No. Stroke Size (In.) (In.) 1 1/ /2 3-1/ BASIC MOUNTING (MXO OR MS4) STANDARD WITH LATERAL TAP (in.) MM KK A AA B BA C D DD E E/2 EA EE G J ND 1-1/2 5/8 7/ / /8 1-1/8 3/8 9/16 1/ / /32 2 5/8 7/ / /8 1-1/8 3/8 9/16 5/ /2 1-1/ / /16 2-1/2 5/8 7/ / /8 1-1/8 3/8 9/16 5/ /2 0 3/ /32 3-1/4 1 3/ / /2 1-1/2 1/2 7/8 3/ /4 1-7/8 0 1/ / / / /2 1-1/2 1/2 7/8 3/ /2 2-1/4 0 1/ / / / /8 1-1/8 1/ /2 3-1/4 0 3/ NT TN WF XT Y LF P SN ZB 1/4-20 5/ / / /4 4-3/4 5/ / / / /4 4-3/4 3/ / / / /8 4-7/8 1/ /2 1-3/8 2-7/ / /8 5-53/64 1/ /16 1-3/8 2-7/ / /8 5-53/64 3/ /4 1-5/8 2-13/ /8 6-5/8 AIRMAX 229

8 250 PSI NFPA Pneumatic Cylinders FRONT FLANGE TYPE (MF1 MOUNTING STYLE) FRONT FLANGE ASSEMBLY* Part No. Size (In.) / / / (in.) MM KK A AA B BA C D DD E EA EE F FB G J 1-1/2 5/8 7/ / /8 1-1/8 3/8 9/16 1/ /8 3/8 5/ /8 7/ / /8 1-1/8 3/8 9/16 5/ / /8 3/8 3/ /2 5/8 7/ / /8 1-1/8 3/8 9/16 5/ /8 3/8 3/ /4 1 3/ / /2 1-1/2 1/2 7/8 3/ /4 0 1/2 5/8 7/ / / /2 1-1/2 1/2 7/8 3/ /2 0 1/2 5/8 7/ / / /8 1-1/8 1/ /2 0 3/4 3/4 9/ R TF UF W WF Y LF P ZB /4 3-3/8 5/ / / /8 4-1/8 5/ / / /8 4-5/8 5/ / / /16 5-1/2 3/4 1-3/ / / /16 6-1/4 3/4 1-3/ / / /8 8-5/8 7/8 1-5/ /8 REAR FLANGE TYPE (MF2 MOUNTING STYLE) REAR FLANGE ASSEMBLY* Part No. Size (In.) / / / (in.) MM KK A AA B BA C D DD E EA EE F FB G 1-1/2 5/8 7/ / /8 1-1/8 3/8 9/16 1/ /8 3/8 5/ /8 7/ / /8 1-1/8 3/8 9/16 5/ / /8 3/8 3/ /2 5/8 7/ / /8 1-1/8 3/8 9/16 5/ /8 3/8 3/ /4 1 3/ / /2 1-1/2 1/2 7/8 3/ /4 0 1/2 5/8 7/ / / /2 1-1/2 1/2 7/8 3/ /2 0 1/2 5/8 7/ Mounting style not available for 6 bore * J R TF UF WF Y P XF ZF /4 3-3/ / /8 4-1/ / /8 4-5/ /4 5-1/ /16 5-1/2 1-3/ /8 6-1/ /16 6-1/4 1-3/ /8 6-1/4 230 AIRMAX

9 250 PSI NFPA Pneumatic Cylinders SIDE LUG MOUNTING TYPE (MS2 MOUNTING STYLE) SIDE LUG ASSEMBLY (Set of 2) Part No. Size (In.) / / / (in.) MM KK A B C D DD E EA EE G J LF P R SB 1-1/2 5/8 7/ /4 1-1/8 3/8 9/16 1/ / /8 2 5/8 7/ /4 1-1/8 3/8 9/16 5/ / / /8 2-1/2 5/8 7/ /4 1-1/8 3/8 9/16 5/ / /8 3-1/4 1 3/ /8 1-1/2 1/2 7/8 3/ /4 0 1/ / / /8 1-1/2 1/2 7/8 3/ /2 0 1/ / / /8 2 5/8 1-1/8 1-1/ /2 0 3/ /4 SS ST SU SW SY TS US WF XS Y ZB / / / / / / / / / / FOOT TYPE (MS1 MOUNTING STYLE) FOOT LUG ASSEMBLY* (Set of 2) Part No. Size (In.) / / / (in.) MM KK A AA AB AE AH AL AO AT B BA C D DD E EA EE F G J S WF Y P LF SA XA ZA 1-1/2 5/8 7/ / /8 2-3/16 1-3/16 1 7/16 1/8 1-1/8 1-1/8 3/8 9/16 1/ /8 3/ / / /8 6-1/16 2 5/8 7/ / /8 2-11/16 1-7/16 1 9/16 1/8 1-1/8 1-1/8 3/8 9/16 5/ / /8 3/ / / /8 6-3/16 2-1/2 5/8 7/ / /8 3-1/8 1-5/8 1 9/16 1/8 1-1/8 1-1/8 3/8 9/16 5/ /8 3/ / /4 6-1/8 5-3/4 6-5/16 3-1/4 1 3/ / /2 3-13/ /16 1-1/4 3/4 11/64 1-1/2 1-1/2 1/2 7/8 3/ /4 0 1/2 5/ /4 1-3/ /4 7-3/8 6-7/8 7-5/ / / /2 4-1/5 2-1/4 1-1/4 3/4 15/64 1-1/2 1-1/2 1/2 7/8 3/ /2 0 1/2 5/ /2 1-3/ /4 7-3/8 6-7/8 7-5/8 Mounting style not available for 6 bore * AIRMAX 231

10 250 PSI NFPA Pneumatic Cylinders DOUBLE REAR CLEVIS TYPE ( MP1 MOUNTING STYLE) DOUBLE REAR CLEVIS ASSEMBLY Part No. Size (In.) / / / (in.) MM KK A AA B C CB CD CW D DD E EA EE F G 1-1/2 5/8 7/ / /8 3/8 3/4 1/2 1/2 9/16 1/ /8 3/ /8 7/ / /8 3/8 3/4 1/2 1/2 9/16 5/ / /8 3/ /2 5/8 7/ / /8 3/8 3/4 1/2 1/2 9/16 5/ /8 3/ /4 1 3/ / /2 1/2 1-1/4 3/4 5/8 7/8 3/ /4 0 1/2 5/ / / /2 1/2 1-1/4 3/4 5/8 7/8 3/ /2 0 1/2 5/ Mounting style not available for 6 bore * J L LR M WF XD Y LF P ZB / / / / / / /8 6-7/ / /8 6-7/ / SINGLE REAR CLEVIS TYPE (MP4 MOUNTING STYLE) SINGLE REAR CLEVIS ASSEMBLY Part No. Size (In.) / / / (in.) MM KK A AA B C CB CD D DD E EA EE F G 1-1/2 5/8 7/ / /8 3/8 3/4 1/2 9/16 1/ /8 3/ /8 7/ / /8 3/8 3/4 1/2 9/16 5/ / /8 3/ /2 5/8 7/ / /8 3/8 3/4 1/2 9/16 5/ /8 3/ /4 1 3/ / /2 1/2 1-1/4 3/4 7/8 3/ /4 0 1/2 5/ / / /2 1/2 1-1/4 3/4 7/8 3/ /2 0 1/2 5/ / / /8 1-1/ /8 1/ /2 0 3/4 3/4 2 J L LR M WF XD Y LF P ZD 1.1 3/4 5/8 1/ / / / /4 5/8 1/ / / / /4 5/8 1/ / / / /4 1 3/4 1-3/8 7-1/ / / /4 1 3/4 1-3/8 7-1/ / / / /8 8-7/ /8 232 AIRMAX

11 250 PSI NFPA Pneumatic Cylinders DOUBLE DETACHABLE REAR CLEVIS TYPE (MP2 MOUNTING STYLE) DOUBLE DETACHABLE REAR CLEVIS ASSEMBLY Part No. Size (In.) / / / (in.) MM KK A AA B C CB CD CW D DD E EA EE F G 1-1/2 5/8 7/ / /8 3/8 3/4 1/2 1/2 9/16 1/ /8 3/ /8 7/ / /8 3/8 3/4 1/2 1/2 9/16 5/ / /8 3/ /2 5/8 7/ / /8 3/8 3/4 1/2 1/2 9/16 5/ /8 3/ /4 1 3/ / /2 1/2 1-1/4 3/4 5/8 7/8 3/ /4 0 1/2 5/ / / /2 1/2 1-1/4 3/4 5/8 7/8 3/ /2 0 1/2 5/ / / /8 1-1/2-3/4 1-1/8 1/ /2 0 3/4 3/4 2 J L LR M WF XD Y LF P ZD 1.1 3/4 5/8 1/ / / / /4 5/8 1/ / / / /4 5/8 1/ / / / /4 1 3/4 1-3/8 7-1/ / / /4 1 3/4 1-3/8 7-1/ / / / /8 8-7/ /8 OTHER CONFIGURATIONS AVAILABLE UPON REQUEST FRONT TRUNNION TYPE (MT1 STYLE) REAR TRUNNION TYPE (MT2 STYLE) CENTER TRUNNION TYPE (MT4 STYLE) DOUBLE ROD CYLINDERS EXTENDED TIE RODS HEAD END (MX3 STYLE) EXTENDED TIE RODS CAP END (MX2 STYLE) BACK TO BACK MOUNTING TIE RODS EXTENDED BOTH ENDS (MX1 STYLE) AIRMAX 233

12 Accessories for NFPA Cylinders PISTON ROD CLEVIS- (ROD JAM NUT AND PIVOT PIN INCLUDED) Part Applicable. No. Size CA1 CB CD CD1 CE CF CW KK /2, 2, 2-1/ / /4, / PISTON ROD EYE - (ROD JAM NUT INCLUDED) Part Applicable No. Size CA CB CD CD2 CM KK /2, 2, 2-1/ / /4, / PIVOT PIN (COTTER PINS INCLUDED) Part Applicable No. Size O.D /2, 2, 2-1/ /4, EYE BRACKET (AT WALL) Part Applicable No. Size A E CB CD DD F FL /2, 2, 2-1/ /4, ROD JAM NUT Part No. Applicable Size /2, 2, 2-1/ /4, 4 REPLACEMENT SEAL KIT Part No. Applicable Size / / / AIRMAX

13 Accessories for NFPA Cylinders MAGNETIC AUTO SWITCH MAGNETIC AUTO SWITCH Part Indicator No. light Yes No AUTO SWITCH MOUNTING BRACKET* Part Applicable No. Size / , 2-1/ /4, 4 * 6 Available upon request only AUTO SWITCH MOUNTING POSITION (IN.) Hs Minimum Size A B Approx. Stroke 1-1/ / / Enables precise control of cylinder movement - Mounts on cylinder with bracket - All NFPA Airmax cylinders are equipped with a magnetic activator integrated into the piston REPLACEMENT SEAL KIT Part No. Applicable Size / / / Synthetic rubber seals (NBR) - Includes seal for cushion, rod, piston and cylinder tube SELF ALIGNING COUPLER PROTECTS AGAINST CYLINDER MISALIGNMENT Part No. Applicable Size /2, 2, 2-1/ /4, 4 - Automatic alignment of the cylinder rod and the attachment point - Prolongs cylinder life by avoiding lateral stress due to poor alignment - Allows up to 5 degree axial correction - Not recommended for rotar y applications AIRMAX 235

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the

More information

SERIES TA (NFPA) CYLINDER

SERIES TA (NFPA) CYLINDER Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder

More information

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING

More information

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard) Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double

More information

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC CYLINDERS, INC SERIES 3000 3000 PSI 5000 PSI NON SHOCK PURAKAL 1234 345 4567 6789 8901 0123 23 PURAKAL 1234567 HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S.Danebo Ave. Eugene, OR 97402-0414

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

Double-Wall Cylinders/Repairable Stainless Steel Cylinders

Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders 6.3-6.15 Repairable Stainless Steel Cylinders 6.16-6.24 DW/RSS Cylinders Bimba Double-Wall Cylinders The Bimba Double-Wall

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

Hydraulic Cylinder NFPA Industrial Type

Hydraulic Cylinder NFPA Industrial Type Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart

More information

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned > Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25

More information

Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400

Inch size: ø1.5, ø2, ø2.5, ø3.25, ø4 How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4) NCA1-L400 NCA1-F400 NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style

More information

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

250 psi rating. series. pneumatic cylinders. bulletin 0606ST. 20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

Pneumatic Cylinders NFPA Series

Pneumatic Cylinders NFPA Series Pneumatic Cylinders NFPA Series INDEX: General characteristics 3 Mounting styles 5 Piston rod characteristics (bore diam 25/150) 6 Single rod cylinder dimensions (bore diam 25/150) 8 Piston rod characteristics

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

3MA/4MA Series Non-Lube NFPA Air Cylinders

3MA/4MA Series Non-Lube NFPA Air Cylinders MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8

More information

CYLINDERS OPTIONS ACCESSORIES

CYLINDERS OPTIONS ACCESSORIES CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount

More information

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1 through 8 18 Mounting Styles. Catalog M September, 2011 Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

Cylinders Small Bore Tie Rod

Cylinders Small Bore Tie Rod Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:

More information

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Cylinders. HD1 Cylinders. Customize Your Cylinder. Viton Seals (VI) Cushions (CR, CF, CB) Low Breakaway Option (NL) Magnetic Piston (MP)

Cylinders. HD1 Cylinders. Customize Your Cylinder. Viton Seals (VI) Cushions (CR, CF, CB) Low Breakaway Option (NL) Magnetic Piston (MP) HD Cylinders Cylinders Customize Your Cylinder The HD Series offers numerous accessories and design options. With hundreds of possible combinations available, you can design your own cylinder for any application.

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006 A NFPA Pneumatic Cylinders for working pressures up to bar Catalogue HY0-090/UK October 00 Catalogue HY0-090/UK Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Stainless steel Cylinders Series 90

Stainless steel Cylinders Series 90 90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,

More information

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE NFPA Industrial Type Cylinders TaskMaster Pneumatic Cylinders (to 200 psi) 1 1/2" - 4" Bores 5" & 6" Bores Profile Design External Tie Rods PowerMaster

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

More information

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI MA SIS Medium-Duty Pneumatic Cylinders Pressure ating 200 PSI Construction DIMNSIONALL INTCHANGABL TO MT ANSI SPCIFICATIONS 1,2 Head & Cap High strength aluminum alloy is used for both head and cap. They

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm > Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel: Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

SERIES HH (NFPA) CYLINDER

SERIES HH (NFPA) CYLINDER HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

T-MAC CYLINDERS, INC.

T-MAC CYLINDERS, INC. T-MAC CYLINDERS, INC. HEAVY DUTY ALUMINUM CYLINDERS AND ACCESSORIES HIGH QUALITY, DEPENDABLE, NFPA INTERCHANGEABLE CYLINDERS - MADE IN THE USA. 9014 SWANSON DRIVE ROSCOE, IL 61073 PHONE: 815-877-7090 FAX:

More information

Our policy is one of continued research and development. We therefore reserve the right 1/98 N

Our policy is one of continued research and development. We therefore reserve the right 1/98 N ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:

More information

Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting

Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552 PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder

More information

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"

NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5, ø2, ø2.5, ø3.25, ø4 NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S 76 85 95 P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder

More information

Series 31 compact cylinders 1/

Series 31 compact cylinders 1/ Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

Stainless Steel Air Cylinders. Series SA

Stainless Steel Air Cylinders. Series SA Stainless Steel Air Cylinders aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding In line with our policy of continuing

More information

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,

More information

Large Bore Extruded Cylinders, ISO 6431 Series 41

Large Bore Extruded Cylinders, ISO 6431 Series 41 Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information

Vickers Pneumatic Cylinders Light Duty. L Series

Vickers Pneumatic Cylinders Light Duty. L Series Vickers Pneumatic Cylinders Light Duty L Series The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power of integrating the competencies of some of the world s most respected

More information

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for

More information

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»

More information

HEAVY DUTY SS STAINLESS STEEL CONSTRUCTION

HEAVY DUTY SS STAINLESS STEEL CONSTRUCTION HEAVY DUTY SS STAINLESS STEEL CONSTRUCTION Ideal for: Food Processing Applications Chemical, Medical or Pharmaceutical Offshore or Marine Equipment Energy Production or Waste Treatment Floating Rod Bushing

More information

FLUID POWER COMPONENTS & SYSTEMS

FLUID POWER COMPONENTS & SYSTEMS FLUID POWER COMPONENTS & SYSTEMS Page Thank you for your interest in Motion Controls LLC. We have been building high quality air and hydraulic cylinders for 50 years in the USA. Motion Controls LLC is

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

Cylinders, Boosters, Accumulators & Accessories

Cylinders, Boosters, Accumulators & Accessories Cylinders, Boosters, Accumulators & Accessories #MC1501Cyl Effective January 1, 2015 Supercedes price list dated June 15, 2014 5877 S. Pennsylvania Ave Cudahy, WI 53110 Phone: 414-769-9700 sales@milwaukeecylinder.com

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and

More information

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion

More information

HPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946

HPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946 HPI Cylinders Manufacturers of Hydraulic & Air Cylinders Since 1946 Cylinder Catalog 2018 HPI Cylinders www.hpicylinders.com Since 1946 Main Plant 13766 Milroy Place Santa Fe Springs, CA 90670 Phone (800)

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous

More information

TELESCOPIC CYLINDERS ø mm Series RT

TELESCOPIC CYLINDERS ø mm Series RT TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a

More information

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure. series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500

More information

Accessories Air/OilTanks Switches Clevis&Brackets AirBoosters AlignmentCouplers. Sensors

Accessories Air/OilTanks Switches Clevis&Brackets AirBoosters AlignmentCouplers. Sensors Air/OilTanks Clevis&Brackets AirBoosters AlignmentCouplers Sensors On time,consistentdelivery.everycustomer sorderisimportant.ourbusinesismanaged solargeordersdonotdisruptourpublisheddeliveryschedules.

More information

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and

More information

Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned

Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned > Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»

More information

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

FULL COLOR TAB #15 PFLF POSITION CONTROL

FULL COLOR TAB #15 PFLF POSITION CONTROL FULL COLOR TAB #15 POSITION CONTROL 254 - How to POSITION FEEDBACK LOW FRICTION () CYLINDER - How it - Pneumatic À HEAD, CAP & RETAINER Precision machined from high strength 6061-T6 aluminum alloy. Black

More information

E Series Economic Tie-Rod Cylinder Line

E Series Economic Tie-Rod Cylinder Line Series Economic Tie-Rod Cylinder Line www.numatics.com Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions 5 E-Series

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F

More information

Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP

Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

E Series Economic Tie-Rod Cylinder Line

E Series Economic Tie-Rod Cylinder Line E Series Economic Tie-Rod Cylinder Line w w w. n u m a t i c s. c o m Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions

More information