Specification. Model MCQV2 MCQV. Tube I.D. (mm) 32,40 50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
|
|
|
- Delphia Atkins
- 6 years ago
- Views:
Transcription
1 MQV / MQV2 series ISO-VDM STNDRD YLINDR Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion and low internal friction. ISO-VDM standard specification onforms to ISO-6431 and VDM specification enabling worldwide interchangeability. ylinder mountings vailable with comprehensive internationally recognised range of fixed and flexible mountings. Specification Model MQV2 MQV Table for standard stroke Order example Stroke (mm) ø32,40 50,75,100,125,150,175,200,250,300,350,400,450,500 ø50, ø80,100,125, ,700 ø ,700,800,900,1000,1500 Stroke out of specification is also available. Please consult us if stroke out of specification. MQV M (mm) 32,40 50,63 80, Medium ir Operating perssure range 0.05~1 MPa Proof pressure 1.5 MPa mbient temperature -5~+60 (No freezing) vailable speed range 50~500 mm/sec Sensor switch (*) R Sensor switch holder HV1 HV2 HV3 HV4 PM16 H5V * R specification, please refer to page 8-6. Mounting accessories F MQV 40 MODL 1: Single rod 2: Double rod TU I.D. STROK M: Magnet MODL MOUNTING TYP TU I.D. MODL L MQV2 ø32~ø100 MQV ø125~ø200 STYL Symbol Description 1 1 Double acting / Male thread 2 1 Double rod / Male thread 2 7 Double rod / djustable male thread (*) D (++PIN) F F T T T * for ø32~ø100 +PIN have to extra purchase. * Please mark "adjustable distance(mm)" at order list. * Order example for special specification, refer to page 0-7. * Order example for Rc or NPT thread please consult us. Y I YS (Y+Floating+PIN) * for ø32~ø100
2 MQV*-11 Inside structure & Parts list ISO-VDM STNDRD YLINDR ø32~ø Single rod 11 type ø125~ø ø200 6 No. Part name Material Q'y omponent parts (inclusion) Repair kits (inclusion) ø32~ø100 ø125~ø200 ø32~ø100 ø125~ø200 Note 1 Rod packing NR 1 2 O-ring NR 2 3 O-ring NR 2 4 Piston packing NR 1 or 2 ø125~ø200 (Q'y 2) 5 O-ring NR 1 6 ushion packing NR 2 * 7 Rod packing NR 1 8 Rod cover luminum alloy 1 9 Head cover luminum alloy 1 10 Piston-R luminum alloy 1 11 Piston-H luminum alloy 1 12 Piston luminum alloy 1 13 ush earing alloy 1 14 Magnet ring Magnet material 1 Option 15 Wear ring Teflon 1 16 Hex nut arbon steel 1 17 olt arbon steel 1 18 Piston nut arbon steel 1 19 Washer arbon steel 1 ø32 does not contain item #19 20 Tie rod nut arbon steel 8 21 Tie rod washer arbon steel 8 22 Needle valve opper alloy 2 23 Insert nut opper alloy 2 24 Needle valve washer arbon steel 2 25 over plate Plastic 2 26 Snap ring arbon steel 2 27 ylinder tube luminum alloy 1 28 Piston rod arbon steel 1 29 Tie rod arbon steel 4 * ushion packing is not included in ø200 repair kits.
3 MQV*-2* ISO-VDM STNDRD YLINDR Inside structure & Parts list ø32~ø Double rod 21 / 27 type ø125~ø ø200 6 No. 21 type 27 type Part name Material Q'y omponent parts (inclusion) Repair kits (inclusion) ø40~ø100 ø125~ø200 ø40~ø100 ø125~ø200 Note 1 Rod packing NR 2 2 O-ring NR 2 3 O-ring NR 2 4 Piston packing NR 1 or 2 ø125~ø200 (Q'y 2) 5 O-ring NR 1 6 ushion packing NR 2 * 7 Rod packing NR 2 8 Rod cover luminum alloy 2 9 Piston-R luminum alloy 1 10 Piston-H luminum alloy 1 11 Piston luminum alloy 1 12 ush earing alloy 2 13 Magnet ring Magnet material 1 Option 14 Wear ring Teflon 1 15 Screw arbon steel 1 16 Tie rod nut arbon steel 8 17 Tie rod washer arbon steel 8 18 Needle valve opper alloy 2 19 Insert nut opper alloy 2 20 Needle valve washer arbon steel 2 21 over plate Plastic 2 22 Hex nut arbon steel 1 23 Snap ring arbon steel 2 24 djustable nut arbon steel 1 25 Gasket PU 1 26 ylinder tube luminum alloy 1 27 Piston rod #1 arbon steel 1 28 Piston rod #2 arbon steel 1 29 Tie rod arbon steel 4 : ø40~ø100, : ø125~ø200 * ushion packing is not included in ø200 repair kits.
4 MQV* omponent parts & Repair kits ø32~ø200 ISO-VDM STNDRD YLINDR Order example of component parts P MQV M MODL lank: Single rod TU I.D. 2: Double rod MODL 32 MQV2 ø32~ø MQV ø125~ø *Order example for Rc or NPT thread please consult us. M: Magnet Order example of repair kits PS MQV X6 MODL MODL MQV2 MQV ø32~ø100 ø125~ø200 lank: Single rod 2: Double rod TU I.D lank: NR X6: Heat resistant material
5 MQV* ccessories ISO-VDM STNDRD YLINDR No. ccessories Page 1 Mounting accessories L 1-36, 42 2 Mounting accessories 1-38, 43 3 Mounting accessories +PIN 1-38, 43, 46, 47 4 Mounting accessories D Mounting accessories F / F 1-37, 42 6 Mounting accessories T / T / T 1-39, 40, 44, 45 7 ccessories Y+PIN 1-46, 47 8 ccessories YS (Y+Floating pin) ccessories I+PIN 1-46, Locking unit MQV* 1-65 No. ccessories Page 11 Floating joint MF Floating joint MFS Female rod ends PHS Fitting P (PISO) 8-5 (Vol.1) 15 Speed controller JS (PISO) 8-18 (Vol.1) 16 ylinder link seats MVSN (Vol.1) 17 Solenoid valve MVSN-220 / , 64 (Vol.1) 18 Sensor switch R+HV* Protective bellows kit
6 MQV2 Dimensions ø32~ø100 ISO-VDM STNDRD YLINDR 11 J Z+Stroke Z+Stroke +Stroke X O L K K L I R 2 øh U øg øh 4-S U 2-DD U 1 UD UD 21 ZN+2 Stroke ZM+2 Stroke +Stroke +Stroke 27 ZQ+2 Stroke+adjust stroke +adjust stroke ZP+2 Stroke +Stroke +Stroke RD R øf S +adjust stroke 2 D F R S 1 2 DD G H I J K L O R M G1/8 M M G1/4 M M G1/4 M M G3/8 M M G3/8 M M G1/2 M S U U UD X Z Z ZM ZN ZP ZQ 32 M M M M M M
7 MQV* Installation of sensor switch ø32~ø200 ISO-VDM STNDRD YLINDR D Sensor switch Hold D MQV2-32 R HV M4 10L MQV2-40 R HV M4 10L MQV2-50 R HV M4 10L MQV2-63 R HV M4 10L MQV2-80 R HV M5 16L MQV2-100 R HV M5 16L MQV-125 R HV M4 10L MQV-160 R PM M4 10L MQV-200 R H5V M4 16L Mounting accessories L ZT+Stroke LX LT LH LM LL LY+Stroke LL LM LR LS 4-øL L LH LL LM LR LS LT LX LY ZT M M M M M M
8 MQV2 Mounting accessories ø32~ø100 ISO-VDM STNDRD YLINDR F 4-øF F FD FF ZF+Stroke FU F F FD FF FR FU FX ZF M M M M M M F 4-øF FR FX FR FX F ZF+Stroke FF FU F F FF FR FU FX ZF M M M M M M
9 MQV2 Mounting accessories ø32~ø100 ISO-VDM STNDRD YLINDR ød H9 R T O L X ZT+Stroke D L R O T X ZT R10.5 M R12 M R13 M R17 M R17 M R21 M ød H9 R H14 T O L h14 X ZT+Stroke D L R O T X ZT R10.5 M R12 M R14 M R17 M R17 M R21 M
10 MQV2 Mounting accessories ø32~ø100 ISO-VDM STNDRD YLINDR D +Pin (xtra purchase) X D DY ZT+Stroke accessory ødi H9 DS DL DT DX 4-øDH D accessory DF DD DF DG D DG D D D D D DD D DF DG DH DI DL DS DT DX DY X ZT M M M M M M T TK TL TT TL TU TJ+1/2 Stroke TF+1/2 Stroke øtd Z+Stroke TX TD TF TJ TK TL TT TU TX Z M e M e M e M e M e M e
11 MQV2 Mounting accessories ø32~ø100 ISO-VDM STNDRD YLINDR T TK T TJ+Stroke TD TF Without magnet Magnet TJ Z TJ Z TK TL TT TU TX M e M e M e M e M e M e TK Z+Stroke TF øtd TX TL TT TL TL TT TL TU TU TJ TF+Stroke øtd Z+Stroke TX TD Without magnet Magnet TF Z TF Z TJ TK TL TT TU TX M e M e M e M e M e M e
12 MQV Dimensions ø125~ø200 ISO-VDM STNDRD YLINDR 11 Z+Stroke Z+Stroke +Stroke J X O K I I K L 4-S L 2-DD 2 øh 6 øg U øh R 1 UD ZN+2 Stroke 21 ZM+2 Stroke +Stroke +Stroke øg øh øg øh R ZQ+2 Stroke+adjust stroke +adjust stroke 27 ZP+2 Stroke +Stroke +Stroke D R øf +adjust stroke D F 1 2 I I J K M G1/2 M e M G3/4 M e M M G3/4 M e M U UD ZP ZQ X Z Z ZM ZN DD G H L O R S M
13 MQV Mounting accessories ø125~ø200 ISO-VDM STNDRD YLINDR L ZT+Stroke LH LL LL LM 4-øL LR LX LM LY+Stroke L LH LL LM LR LS LT LX LY ZT M M M LS LT F 4-øF ZF+Stroke F F FD FF FR FU FX ZF M M M F FR FR FX F FD FF FU FX F ZF+Stroke FF FU 4-øF F F FF FR FU FX ZF M M M
14 MQV Mounting accessories ø125~ø200 ISO-VDM STNDRD YLINDR R ød H9 O T L X ZT+Stroke D L R O T X ZT R25 M R30 M R30 M R ød H9 H14 O h14 X L T ZT+Stroke D L R O T X ZT R25 M R30 M R30 M
15 MQV Mounting accessories ø125~ø200 ISO-VDM STNDRD YLINDR T TL TK TL TT TU TJ+1/2 Stroke TF+1/2 Stroke øtd TX Z+Stroke M e M e M e T TD TF TJ TK TL TT TU TX Z TL TK TL TT TU TJ+Stroke øtd TF Z+Stroke TX TD TF Without magnet TJ 100 Z Magnet TJ Z TK TL TT TX TU 54 M e M e M e
16 MQV Mounting accessories ø125~ø200 ISO-VDM STNDRD YLINDR T TK TL TT TU TL TJ Z+Stroke TF+Stroke øtd TX TD TJ Without magnet Magnet TF Z TF Z TK TL TT TX TU M e M e M e
17 MQV2 / MQI2 ccessories ø32~ø100 ISO-VDM STNDRD YLINDR Y connector ø32~ø40 ø50~ø100 I connector M M M L L L (H)* (H)* D øg D øg øg øx H KK øx H KK øx H KK PIN * Please do not take the sand casting plate as the mounting plate, because we do not machine it. If you have this special demand, please contact our sales representative. H D G H KK L M Y I Y I Y I Y I Y I Y I Y I Y I Y I X H ø18 ø M ø ø20 ø M ø ø28 ø M ø ø28 ø M ø ø36 ø M ø ø36 ø M ø Order example * MQV / MQI are common accessories. 1-ø PIN MQV 40 Y P P ød ød d9 PIN S TU I.D. 32~100 ød P: With split pin TYP S: Floating pin Y: for Y & I connector (Only for Y connector) : for & accessory for Y & I connector D d9 D F Split pin ø L ø L 50, ø L 80, ø L F 2-F 2-ø ø P ød d9 for floating pin D d ø ø , ø , ø for & D d9 F Split pin ø L ø L ø L ø L ø L ø L
18 MQV ccessories ø125~ø200 ISO-VDM STNDRD YLINDR Y connector I connector M L M L D øg øg øx KK øx KK (H)* H H * Please do not take the sand casting plate as the mounting plate, because we do not machine it. If you have this special demand, please contact our sales representative. H D G H KK L M X F7 Y I Y I Y I Y I Y I Y I Y I Y I Y I Y I M M M PIN Order example PIN MQV 125 Y P PIN TU I.D. TYP P: With split pin Y: for Y & I connector : for & accessory 2-F 2-ø P ød d9 P ø ød 2-F for ø125 Type D d9 F Split pin ø L Y ø L for ø160, ø200 Type D F Split pin e STW-30 h7-0 Y STW-35
Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
Specification. Model. Tube I.D. (mm) 32,40,50,63,80,100. Medium. Proof pressure. Ambient temperature. Available speed range.
MCQI2 series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to
Specification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature
MM series MINITURE YLINDER Features Non lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a
Specification. Tube I.D Port size Rc1/8 Rc1/4. Medium. Ambient temperature. Lubricator
series MIITURE YLIDER eatures on lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a high resistance
ISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8.
MCMI series ISO- MINITURE CYLINDER/NON-PIVOT TYPE MINITURE CYLINDER Table for standard stroke Single acting Double acting ø,,0,7,00 Tightening torque Order example Stroke (mm) ø0,,,0,7,00,,0 ø,0 0,,0,0,0,00
Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.
series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500
Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment
Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double
% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing
15% lighter. Air Cylinder. 1.31kg. CA2 Series. Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to
Air ylinder A Series ø40, ø50, ø63, ø80, ø100 RoHS Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to (ø50-50 stroke) 15% lighter 1.31kg Easy air cushion control
10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
Features. Specification. Model. Tube I.D. (mm) Port size G1/8 G1/8 G1/4 G3/8. Medium. Ambient temperature.
series TIN-UID CYLINDR eatures The guide units can be assembled to cylinders that then conform to ISO6432. nti rotation guaranteed by use of external guide rods. our self lube bushes or linear bearings
10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125
ir Cylinder M Series ø3, ø40, ø50, ø63, ø80, ø00, ø5 RoHS 0% lighter CJ (ø40-00 stroke) Weight M Series 0.9 kg CJP CJ JCM CM Current model CM3 CG.0 kg CG3 JM Reduced weight by changing the shape of the
15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy
Features. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature
series PRE GRIPPER (2-inger) Order example HD 2R MODE TUE I.D. 8 12 16 2 PIPING TYPE lank: xial piping R: Side piping eatures ow profile design saves space and reduces bending moments, improved accuracy
10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.
ir Cylinder New ø 3, ø 40, ø 50, ø 63, ø 80, ø 100, ø 15 10 % lighter RoS (ø 40-100 stroke) Weight Existing model New 1.01 kg Series dded ø 15 to standard type. 0.91 kg Reduced weight by changing the shape
Features. Specification. Tube I.D. (mm) Medium. Material. Ambient temperature. Type MHCBR MHCBF MHCBS
MH* series MIFLD TPE HDLI IDE Features ompact body design keeps overall length to a minimum. ylinder barrel internally honed to ensure smooth and consistent piston movement. High quality materials are
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125
Symbol Features Ideal for clamping, press-in and under short stroke condition. Can be installed even in a narrow space with a shorter length in axial thrust direction. Easy installation only with bolts.
NEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.
Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.
ISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
Series OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
NFPA Interchangeable Air Cylinder Medium Duty Series. ø1.5", ø2", ø2.5", ø3.25", ø4"
NFP Interchangeable ir ylinder Medium Duty Series Series N ø.5", ø2", ø2.5", ø3.25", ø4" P 2 M2 2 S 76 85 95 P95 Medium Duty.5 to 4" Bore 2 Different NFP Mounting Options Non-rotating Option Tandem ylinder
bar -30 C C ( C for high temperature version)
Technical details ylinders > piston rod cylinders > Mini cylinders ISO 6432, double acting Operating pressure Temperature range Medium 1... 10 bar -30... +80 ( 0... +150 for high temperature version) Filtered,
High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ. Individual
High Power ylinder Series RH ø, ø, ø, ø, ø, ø3, ø, ø RE RE RE Y X RH D- -X -X High power cylinder: Smooth cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity
Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
Hygienic Design Cylinder
ygienic Design ylinder Series Y water resistant cylinder configured for easy cleaning Series Y ISO standard type Series Y asic type Series YQ With guide Series YG J G Y Series 0 0 External seal material
CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125
M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double
1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1
1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston
LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
Reduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
Hygienic Design Cylinder
CT.EUS- -UK Hygienic Design Cylinder New Round type Series HY has been added. water resistant cylinder configured for easy cleaning ISO standard type Series HYC asic type Series HYQ With guide Series HYG
High Power Cylinder. Series RHC. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 REA REB REC C Y C X MQ RHC RZQ D- -X
ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical () 46-4 www.cmafh.com High Power ylinder ø, ø, ø3, ø4, ø, ø, ø, ø 33 RE RE RE Y X RH ourtesy of M/Flodyne/Hydradyne
16% lighter Existing model
ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter Existing model New Series.0 kg.69 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set
Compact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170
3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.
ir Cylinder ø3, ø40, ø50, ø63, ø80, ø00 New RoS Weight (ø63-00 stroke) 6% lighter New Series Existing model.69 kg.0 kg Reduced weight by changing the shape of the rod cover and head cover. Series/ set
LPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
ACS2 series. KCC Co., Ltd. PNEUMATIC & HYDRAULIC. ACS2 series. For more info visit us : ACS2 - N LB 32 - S 100
KCC Co., Ltd. Symbol Features With auto switch, rubber bumper (Standard). improves lateral load resistance. Double Acting / Single Rod Double Acting / Double Rod Single Acting / Spring Return Single Acting
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Lube. Single rod. Non-lube CS1. series. Air-hydro. Lube. Double rod CS1W series. Non-lube. Non-lube
Air ylinder S Series,,,,,, J Series Variations Series Action asic Standard variations Page JP J JM Standard S Series S Series Double acting Single rod S series Double rod SW series 5 548 M M3 G G3 JM M
Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.
ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side
PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
Compact Rotary Actuator
Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle
Strokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.
Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Series OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
Features. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.
MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
Compact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle
Low Friction Cylinders
ow riction ylinders Series Metal Seal Type P.112 Series QT Standard type Q ateral load resisting type (uilt-in ball bushing) ompact ow riction ylinder Series Q Operating pressure range (MPa) 0.00 to 0.
Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X
Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output
MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X
Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double
Air Cylinder. ø125, ø140, ø160, ø180, ø200, ø250, ø300. Lube. Single rod. Non-lube. Series. Air-hydro. Lube. Double rod. Non-lube CS1W.
Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 M G M M A S S Series
Series MBB ø32, ø40, ø50, ø63, ø80, ø100
Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis
Rotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180,
G V* H FH HP S2 H/ LH LHG HL/ HLG/ G HL HM G S *H H2 L2 N/ S/F Specifications escriptions Size ffective torque Note 1 N m ctuation Working fluid Max. working pressure MPa Min. working pressure Note 2 MPa
Series C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)
Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles
Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
Air Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm
ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot
Cylinder with Lock CNA. ø40, ø50, ø63, ø80, ø100 Suitable for intermediate stops, emergency stops and drop prevention
ylinder with Lock Series ø, ø, ø, ø, ø Suitable for intermediate stops, emergency stops and drop prevention Simple construction force magnifying mechanism is employed based on the wedge effect of the taper
Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
210C-1 21 MPa double-acting type hydraulic cylinder
17 2-1 21 MPa double-acting type hydraulic cylinder ompact design hydraulic cylinder at 21MPa. 21 MPa double-acting hydraulic cylinder with bores from 4 mm to 2 mm. Inovation of design scrutinized carefully
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
Single Acting Uniform Speed 2-stage TTC-1 Single Acting Uniform Speed 2-stage Telescopic Cylinder TTC-1 Telescopic Cylinder
26 27 ylinder bore (mm) Nominal pressure Maximum allowable pressure Proof pressure Minimum operating pressure Working speed range Tolerance of stroke Mounting style 15 1 127 3 2 f63 f9 f11 f1 f1 f1 f1
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.
Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common
Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55
55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
Compact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
Bore size: JSC3: φ40/φ50/φ63/φ80/φ100. JSC4: φ125/φ140/φ160/φ180
764 Min. stroke length with switch ( switch) Brake cylinder: Double acting, single rod/double acting, no-lubrication -N Series : JSC3: φ40/φ50/φ63/φ80/φ100 JSC4: φ125/φ140/φ160/φ180 JIS symbol Specifications
Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.
Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
VNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable