Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.
|
|
|
- Samuel Goodwin
- 5 years ago
- Views:
Transcription
1 series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500 * Please consult us if stroke out of specification. Order example Features ISO standard. Wide range of bore sizes and strokes. Ultra compact, light weight and space saving. Sensor slots on RCI sides for flush mounting of proximity sensors. Magnetic as standard. Specification Acting type Model Double acting (mm) 20,25 32,40,50,63,80,100 Port size M5 0.8 G1/8 Medium Operating perssure range Proof pressure Cushion Lubricator Stroke length tolerance (*) Ambient temperature Available speed range Air 0.05~1 MPa 1.5 MPa Rubber bumper Without lubrication +0~+1.0 mm -5 C~+60 C (No freezing) 50~500 mm/sec Sensor switch RCI (Please refer to page 8-11) * Stroke length tolerance does not include the amount of bumper change. Mounting accessories FAC 20 MODL TUB I.D. STROK MOUNTING TYP MODL TUB I.D. 1: Single rod 2: Double rod LB CA STYL Symbol Description 1 1 Double acting / Male thread 1 2 Double acting / Female thread 2 1 Double rod / Male thread 2 2 Double rod / Female thread CB FAC FBC MP * ø20, ø25 without CB accessory. Installation of sensor switch Sensor switch RCI * Order example for special specification, refer to page 0-7. Watchmakers screw driver Set screw
2 Inside structure & Parts list Single rod Double rod A A Material No. Part name Material Q'y Single Double 1 Rod cover Aluminum alloy nd cover Aluminum alloy 1 3 Tube Aluminum alloy Piston-R Aluminum alloy Piston-H Aluminum alloy Piston rod * Rod packing NBR Bush Bearing alloy Magnet ring Magnet material Piston packing NBR O-ring NBR Screw Carbon steel 1 13 Cushion NBR O-ring NBR Screw Stainless steel Wear ring Teflon 1 1 Component parts (inclusion) * Material ø20, ø25: Stainless steel; ø32~ø100: Medium carbon steel. Cylinder weight Model Basic weight -11 Stroke 10mm -11 Basic weight -12 Repair kits (inclusion) Stroke 10mm -12 Unit: g Order example Component parts / Repair kits Single rod Tube I.D. Component parts Repair kits ø20 CP--20 PS--20 ø25 CP--25 PS--25 ø32 CP--32 PS--32 ø40 CP--40 PS--40 ø50 CP--50 PS--50 ø63 CP--63 PS--63 ø80 CP--80 PS--80 ø100 CP--100 PS--100 Double rod Tube I.D. Component parts Repair kits ø20 CP PS ø25 CP PS ø32 CP PS ø40 CP PS ø50 CP PS ø63 CP PS ø80 CP PS ø100 CP PS Tube I.D. ø ø ø ø ø ø ø80 1, , ø100 2, ,060 92
3 Accessories No. Accessories Page 1 Mounting accessories LB Mounting accessories FAC/FBC Mounting accessories MP Mounting accessories CA Mounting accessories CB+PIN Floating joint MFC Floating joint MFCS Female rod ends PHS Fitting PC (PISCO) 8-5 (Vol.1) 10 Speed controller JSC (PISCO) 8-18 (Vol.1) 11 Sensor switch RCI 8-11
4 Dimensions ø20~ø100 Single rod Double rod ø20~ø25 TG G ZB+Stroke ZC+2 Stroke ZA+Stroke ZA+Stroke +Stroke C C C C PL PL PL PL KF AF J KF AF øi RT RT ø32~ø100 TG G KK B A A1 B1-11/21 male thread size A A1 B B1 KK M M M M M M M M AF C D G I J KF PL TG RT ZA ZB ZC M M M M M M G1/ M M G1/ M M G1/ M M G1/ M M G1/ M M G1/ M M
5 Mounting accessories ø20~ø100 MP B B ZA Max. overall stroke mm mm mm mm mm mm mm mm 1 * The max. overall stroke length may not be exceeded when combining cylinders and multi-position kits No. Part name Q'y 1 Connection block 1 2 Flange 2 3 Bolt 2 4 Bolt 2 ZA+Stroke B ZA+Stroke LB SA+Stroke XA+Stroke AH A L R øab T TR AO AU AU AO AB AH AO AU A L R SA T TR XA
6 Mounting accessories ø20~ø100 FAC ø20~ø25 MF W ø32~ø100 R D FB MF R W ZB FBC ø20~ø25 MF ZB+Stroke ZF+Stroke ø32~ø100 R D FB MF R ZF
7 Mounting accessories ø20~ø100 CA Z+Stroke FL±0.2 L øcd(h9) ømr W CD W FL L MR Z h h CB Z+Stroke UB(h14) FL±0.2 L CB(H14) øcd(h9) ømr CB CD FL L MR UB Z * ø20, ø25 without CB accessory. PIN Order example PIN 32 CB P P 2-C0.5 2-øB øa F PIN TUB I.D P: With split pin TYP CB: for CB accessory A(e8) B C F Snap ring STW STW STW STW STW STW-20
Specification. Model. Tube I.D. (mm) 32,40,50,63,80,100. Medium. Proof pressure. Ambient temperature. Available speed range.
MCQI2 series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to
Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
ISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8.
MCMI series ISO- MINITURE CYLINDER/NON-PIVOT TYPE MINITURE CYLINDER Table for standard stroke Single acting Double acting ø,,0,7,00 Tightening torque Order example Stroke (mm) ø0,,,0,7,00,,0 ø,0 0,,0,0,0,00
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Specification. Model MCQV2 MCQV. Tube I.D. (mm) 32,40 50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
MQV / MQV2 series ISO-VDM STNDRD YLINDR Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
DN series - Standard cylinder
series - cylinder Double piston packing type series ISO-431 specification series Provide CAD external dimension. DMB DU K Rod Locking his product : E End lock Use for longer stroke request DCK2 DCQ Pin
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Profile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
Series 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Features. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.
MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube
Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
Specification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature
MM series MINITURE YLINDER Features Non lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
CYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
Series CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
Specification. Tube I.D Port size Rc1/8 Rc1/4. Medium. Ambient temperature. Lubricator
series MIITURE YLIDER eatures on lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a high resistance
ISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
compact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
Air Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
Series C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
Compact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
Multi-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Available: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
Series C95N. ISO/VDMA Cylinder: With Lock Type Double Acting, Single Rod. ø32, ø40, ø50, ø63, ø80, ø100. How to Order
ISO/VDMA Cylinder: ith Lock Type Double Acting, Single Rod Series CN ø, ø, ø, ø, ø, ø How to Order ithout auto switch CN B - XG ith auto switch CND B - XG Built-in magnet Mounting style B L G C D Basic/without
MCHG2 series MCHG2 16 M. PARALLEL GRIPPER (3-Finger) Features. Order example. Specification. Installation. Model. Model MM UU UA Bolt
MCHG2 series PARALLEL GRIPPER (3-inger) eatures Through holes in body enable simple mounting. Body manufactured from high tensile, anodised aluminum giving good resistance to corrosion. Available with
Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
Flat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
NFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
P1M Series. Extra Low Profile Pneumatic Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents
Series xtra Low Profile Pneumatic Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...4 Ordering Information...5 Specifications...6 Technical Data...7 Dimensions... 8-11 Mounting Dimensions...
ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure
Our policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.
Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient
KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,