CYLINDERS. Moving more than air

Size: px
Start display at page:

Download "CYLINDERS. Moving more than air"

Transcription

1 CYLINDRS 1 Moving more than air

2 Content page 1.1 Round cylinders RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm Accessories for round cylinders according to ISO RIM / RIM / RIDM Round cylinders piston-ø mm Accessories for round cylinders piston-ø mm Compact cylinders P(I)M / PM(I)Z Compact cylinders with spring return PDM / PDMI Double acting compact cylinders 16 PDM(I)B With through piston rod 18 PDM(I)F Non rotating 19 Non-standards (Tandem, 3- and 4-positions) Accessories for compact cylinders Cylinders according to ISO DVP(M) / DVPMB Standard and low friction cylinders piston-ø mm DI(M) / DIMB Tie-rod cylinders, standard and low friction piston-ø mm Accessories for cylinders according to ISO Additional accessories for cylinders GF / GS / F / DS Fixings for the piston rod M60 / BR / BZ / BD Proximity switches and fasteners LFA_ Guide units AMCCG Integrated guide and actuator MRL / VRL Locking units Cylinder-valve-combinations 58 Selected products are available for explosion hazardous environment with ATX certification. Please refer to catalogue number 8. Cylinders of the norr product range are displayed in catalogue number 3. Measures without dimensions are in mm. The JOYNR company policy is one of a continuous improvement process. We therefore reserve the right to amend, enhance and change specifications of the products presented in this document without notice.

3 Round cylinders single and double acting according to ISO RI-8 to RI-25 RIM-8 to RIM-25 M = with magnetic piston RI 8-25 RIM 8-25 M = with magnetic piston RIB 8-25 RIBM M = with magnetic piston RID RIDM M = with magnetic piston Technical characteristics General characteristics Piston-Ø 8 25 mm Stroke mm Port size M5, G 1/8 Fixing according to ISO 6432 Mounting position any Temperature range Ø Ø Materials used dried air below 0 C 20 C + 80 C 35 C + 80 C Body and head: aluminum anodized, Piston rod and tube: stainless steel Seals: Ø : NBR-PUR Ø : PUR Pneumatic characteristics Medium compressed air, filtered max. 50 µm Operating pressure 1 10 bar Piston-Ø Standard strokes [mm] 8 10 mm 10, 25, 50, 80, 100, mm 10, 25, 50, 80, 100, 125, 160, mm 10, 25, 50, 80, 100, 125, 160, 200, 250, Cylinders Ø 16 Ø 25 are also available in stainless steel. Numbering system R IB / Stroke in mm = Single acting Piston-Ø in mm D = Cushioning B = Through piston rod M = Magnetic piston

4 Round cylinders single and double acting according to ISO RI../... RIM../... RI../... RIM../... RIDM../... I 13 + stroke I 22 + stroke I 8 + stroke Dimensions Piston-Ø I 1 I 2 I 8 I 9 I 10 I 13 I 14 I 17 I 22 I 32 8 mm mm mm mm mm mm Dimensions Piston-Ø I 49 I 50 I 51 I 52 I 53 d 6 d 7 d 8 d 9 d 15 8 mm M4 4 M5 M12 x mm M4 4 M5 M12 x mm M6 6 M5 M16 x mm M6 6 M5 M16 x mm M8 8 G1/8 M22 x mm M10 x G1/8 M22 x Single acting cylinders up to 50 mm stroke. Retraction force for RI-cylinders Stroke Piston-Ø 10 mm 25 mm 50 mm F1 F2 F1 F2 F1 F2 8, 10 mm 4.5 N 5.2 N 3.9 N 5.2 N 2.5 N 5.2 N 12 mm 5.7 N 6.0 N 5.1 N 6.0 N 4.1 N 6.0 N 16 mm 15.0 N 17.5 N 11.5 N 17.5 N 5.3 N 17.5 N 20 mm 21.3 N 23.5 N 18.0 N 23.5 N 12.5 N 23.5 N 25 mm 18.2 N 19.5 N 16.2 N 19.5 N 12.9 N 19.5 N F1 = Force in initial position F2 = Force piston-rod extended

5 Round cylinders single and double acting according to ISO Type: Please order: Type: Please order: RIB double acting RIB-piston-Ø/stroke RIBM double acting with magnetic piston RIBM-piston-Ø/stroke I 8 + stroke I 1 + stroke Dimensions for cylinders with through piston rod Piston-Ø I 1 22I 2 I 8 I 14 I 17 I 49 I 50 I 51 I 52 8 mm mm mm mm mm mm Piston-Ø I 53 d 6 d 7 d 8 d 9 8 mm 7 M4 4 M5 M12 x mm 7 M4 4 M5 M12 x mm 10 M6 6 M5 M16 x mm 10 M6 6 M5 M16 x mm 13 M8 8 G1/8 M22 x mm 17 M10 x G1/8 M22 x 1.5

6 Accessories for round cylinders according to ISO Pos. Fixing element Type 1 Flange MF 8 refer to page 7 2 Foot MS 3 refer to page 7 3 Clevis foot mounting LB refer to page 7 4 Fixing nut GT refer to page 7 5 Linear guide LFAC refer to chapter Linear guide LFAH refer to chapter Universal rod eye for piston rod GS refer to chapter Flexible joint F refer to chapter Rod clevis GF refer to chapter Proximity switch M/60 refer to chapter Fastener for proximity switch BR refer to chapter 1.4.2

7 Accessories for round cylinders according to ISO Accessory flange MF 8 Type Piston-Ø I 37 I 29 I 25 I 36 d 14 MF8-08/ mm MF8-12/ mm MF8-20/ mm Accessory foot MS 3 Type Piston-Ø I 37 d 14 I 31 I 25 I 27 I 26 I 30 I 36 I 29 MS3-08/ mm MS3-12/ mm MS3-20/ mm Delivery: 1 piece Accessory clevis foot mounting LB Type Piston-Ø d 14 d 15 I 46 I 30 I 26 I 33 I 34 I 36 I 29 LB-08/ mm LB-12/ mm LB-20/ mm Accessory fixing nut GT Type Piston-Ø A B C GT-M12 x 1, mm M12 x GT-M16 x 1, mm M16 x GT-M22 x 1, mm M22 x

8 Round cylinders 32 to 63 mm single and double acting with magnetic piston RIM RIM RIDM Technical characteristics General characteristics Piston-Ø mm Stroke mm Port size G 1/8, G 1/4, G 3/8 Mounting position any Temperature range dried air below 0 C 35 C + 80 C Materials used Body and head: aluminum anodized Piston rod and tube: stainless steel Seals: PUR Pneumatic characteristics Medium compressed air, filtered max. 50 µm Operating pressure 1 10 bar Standard strokes [mm] Single acting 10, 25, 50 Double acting 10, 25, 50, 80, 100, 125, 160, 200, 250, 320, 400, 500 Retraction force for RI-cylinders Stroke Piston-Ø 10 mm 25 mm 50 mm F1 F2 F1 F2 F1 F2 32 mm 57 N 62 N 51 N 62 N 40 N 62 N 40 mm 96 N 105 N 84 N 105 N 63 N 105 N 50 mm 107 N 114 N 96 N 114 N 78 N 114 N 63 mm 107 N 114 N 96 N 114 N 78 N 114 N F1 = Force in initial position F2 = Force piston-rod extended

9 Round cylinders 32 to 63 mm single and double acting with magnetic piston Type: Please order: RIM single acting with magnetic piston RIM-piston-Ø/stroke P 1 + stroke G + stroke P + stroke Dimensions Piston-Ø* A A 1 B T C D F G L P P 1 CH R 32 mm M10 12 M30 x /8 40 mm M12 16 M38 x /4 50 mm M16 20 M45 x /4 63 mm M16 20 M45 x /8 Type: Please order: Type: Please order: RIM double acting with magnetic piston RIM-piston-Ø/stroke RIDM double acting with adjustable cushioning and magnetic piston RIDM-piston-Ø/stroke P 1 + stroke G + stroke P + stroke Dimensions Piston-Ø* A A 1 B T C D F G L P P 1 CH R 32 mm M10 12 M30 x /8 40 mm M12 16 M38 x /4 50 mm M16 20 M45 x /4 63 mm M16 20 M45 x /8 * Single acting cylinders up to 50 mm stroke.

10 Accessories for round cylinders Ø Pos. Fixing element Type 1 Clevis foot mounting LB refer to page 12 2 Fixing nut GT refer to page 12 3 Foot MS 3 refer to page 12 4 Trunnion (1 pair) CP refer to page 11 5 Fastener for proximity switch BR refer to chapter Proximity switch M60 refer to chapter Nut for piston rod DS refer to page 11 8 Rod clevis GF refer to chapter Universal rod eye for piston rod GS refer to chapter Flexible joint F refer to chapter 1.4.1

11 Accessories for round cylinders Ø Accessory trunnion CP Please order: CP-piston-Ø L 1 + stroke Piston-Ø D H L 1 L CH 32 mm mm mm mm pair Accessory nut for piston rod DS Please order: DS- dimension A Piston-Ø A B C 32 mm M mm M mm M mm M

12 Accessories for round cylinders Ø Accessory clevis foot mounting LB Please order: LB-piston-Ø Piston-Ø D 1 D 2 A A 1 G M 1 N 1 N 2 R 1 S CH 2 B 1 B 2 B 3 V C 1 C 2 32 mm M8 x mm M10 x mm M12 x mm M14 x Accessory foot MS3 Please order: MS3-piston-Ø L 3 + stroke L 2 + stroke Piston-Ø 2 3 C 1 C 2 L 2 L 3 B 3 B 4 S A 1 A 2 A 3 32 mm mm mm mm Delivery: 1 piece Accessory fixing nut GT Please order: GT- dimension B Piston-Ø B D H 32 mm M30 x mm M38 x mm M45 x mm M45 x

13 1.2.1 Compact cylinders PM / PMZ According to ISO 21287, single acting, piston-ø 20 to 100 mm PM Spring in head PMZ Spring in cap Fixing elements in accordance to ISO can be used Compact design to safe space Proximity switches type M60 can be assembled into cylinder profile Standard models Piston-Ø Rod-Ø Port size Spare-part kit 20 mm 10 M5 T-PM mm 10 M5 T-PM mm 12 G1/8 T-PM mm 16 G1/8 T-PM mm 16 G1/8 T-PM mm 16 G1/8 T-PM mm 20 G1/8 T-PM mm 25 G1/8 T-PM-100 Piston- PM Force at 6 bar [N] PMZ Force at 6 bar [N] Ø extending spring retracting spring 20 mm mm mm mm mm mm mm mm Technical characteristics General characteristics Medium compressed air, filtered, particels max. 50 µm Function single acting with magnetic piston spring in head PMI female thread on piston rod, PM male thread on piston rod, including fixing nut spring in cap PMIZ female thread on piston rod, PMZ male thread on piston rod, including fixing nut Operating pressure 2 10 bar Temperature range 20 C * + 80 C * below 0 C dried air only Standard strokes 5 mm, 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm, 60 mm, others on request Materials used ndcaps aluminum painted, Tube: aluminum anodized, Piston rod: stainless steel (AISI 303), Seals: NBR and PUR Numbering system PM M B / / HT = spring in head Z = spring in cap I = female thread Stroke in mm max. 60 mm Piston-Ø in mm Non-standard HT for use up to 150 C

14 Compact cylinders PM / PMZ According to ISO PM Ø 20 to 100 mm PMI Cylinder with spring in head piston rod with female thread Ø40 - Ø50 Ø40 - Ø50 PM Cylinder with spring in head I10 I10 piston Ø63 rod - Ø80 male - Ø100thread Ø63 - Ø80 - Ø100 AF AF L3 PL3 PL PL PL A A D 2 D 2 D F D F WH ZA+ WH ZA+ D 5 R T D 5 R T R T D 5 R T D 5 ZB+ ZB+ LA LA LA Ø20 - Ø25 Ø20 - Ø25 Ø32 Ø32 Ø40 - Ø50 Ø40 - Ø50 I10 Ø63 - Ø80 - Ø100 I10 Ø63 - Ø80 - Ø100 Dimensions D F AF AF L3 PL3 PL PL PL D F D 2 D 2 A A Piston-Ø 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm A AF Ø D WH 10 ZA+ WH10 12 ZA D 5 Ø D2 9 ZB+ 9 9 ZB+ 9 LA LA 12 LA 12 Ø D M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ I F M6 M6 M8 M8 M10 M10 M12 M12 M8 M8 M10 x 1.25 M10 x 1.25 M12 x 1.25 M12 x 1.25 M16 x 1.5 M16 x 1.5 LA L PL RT M5 M5 M6 M6 M8 M8 M10 M WH ZA+ 37* 39* 44* 45* 45* 49* 54* 67* ZB+ 43.5* 45* 50.5* 52* 53* 57* 63* 77* R T D 5 R T R T D 5 R T D 5 + plus stroke (mm) * for stroke 35, 40, 50, 60 mm / for Ø 20 mm plus 10 mm / for Ø 25, 32, 40, 50, 63 mm plus 20 mm / for Ø 80 to 100 mm plus 30 mm

15 Ø20 - Ø25 Ø20 - Ø25 Ø32 Compact cylinders PM / PMZ Ø According to ISO PMIZ Ø 20 to 100 mm PMIZ Cylinder with spring in cap piston rod with female thread Ø40 - Ø50 Ø40 - Ø50 PMZ Cylinder with spring in cap piston rod male thread I10 Ø63 - Ø80 - Ø100 I10 Ø63 - Ø80 - Ø100 L3 L3 PL PL PL PL AF AF D 2 A D 2 A D F D F D 5 D 5 AF AF WH+ ZA+ WH+ ZB++ ZB++ ZA+ WH+ WH+ R T LA R T LA Ø20 - Ø25 Ø20 - Ø25 Ø32 Ø32 Ø40 - Ø50 Ø40 - Ø50 I10 Ø63 - Ø80 - Ø100 I10 Ø63 - Ø80 - Ø100 Dimensions L3 D 2 A A AF AF Piston-Ø 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm A AF D F D F Ø D AF 10 10AF Ø D2 WH+ 9 ZA+ 9 WH+ 9 ZA Ø D5 7.5 ZB ZB++ WH WH LA 13.5 LA M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ I F M6 M6 M8 M8 M10 M10 M12 M12 M8 M8 M10 x 1.25 M10 x 1.25 M12 x 1.25 M12 x 1.25 M16 x 1.5 M16 x 1.5 LA L PL RT M5 M5 M6 M6 M8 M8 M10 M WH ZA+ 37* 39* 44* 45* 45* 49* 54* 67* ZB * 45* 50.5* 52* 53* 57* 63* 77* + plus stroke (mm) / ++ plus 2 x stroke (mm) * for stroke 35, 40, 50, 60 mm / for Ø 25, 32, 40, 50, 63 mm plus 20 mm / for Ø 80 to 100 mm plus 20 mm L3 PL D 2 PL R T PL D 5 R T PL D 5

16 Compact cylinders PDM / PDMI According to ISO 21287, double acting, piston-ø 20 to 100 mm PDM Ø 20 to 100 mm Fixing elements in accordance to ISO can be used Compact design to safe space Proximity switches type M60 can be assembled into cylinder profile Standard models Piston-Ø Rod-Ø Port size Spare-part kit 20 mm 10 M5 T-PDM mm 10 M5 T-PDM mm 12 G1/8 T-PDM mm 16 G1/8 T-PDM mm 16 G1/8 T-PDM mm 16 G1/8 T-PDM mm 20 G1/8 T-PDM mm 25 G1/8 T-PDM-100 PDM Force at 6 bar [N] Piston-Ø extending retracting 20 mm mm mm mm mm mm mm mm Technical characteristics General characteristics Medium compressed air, filtered max. 50 µm Function double acting with magnetic piston PDMI female thread on piston rod, PDM male thread on piston rod, including fixing nut Operating pressure 1 10 bar Temperature range 20 C * + 80 C * below 0 C dried air only. Standard strokes 5 mm, 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 40 mm, 50 mm, 60 mm, 70 mm, 75 mm, 80 mm, 90 mm, 100 mm, 125 mm, 160 mm, 200 mm, 250 mm; starting Ø 32: 300 mm, 350 mm, 400 mm; others on request. For strokes larger 100 mm we recommend the use of guide units. Materials used ndcaps aluminum painted, Tube: aluminum anodized, Piston rod: stainless steel (AISI 303), Seals: NBR and PUR Numbering system PDM M B / / I = Female thread B = Through piston rod F = Non rotating rod (Ø ) Non-standard refer to page 21 Stroke in mm Standard please refer to table above, others on request Piston-Ø in mm

17 Ø20 - Ø25 Ø20 - Ø25 Ø32 Compact cylinders PDM / PDMI Ø According to ISO PDM Ø 20 to 100 mm PDMI Piston rod with female tread Ø40 - Ø50 Ø40 - Ø50 PDM Piston rod with male tread I10 I10 Ø63 - Ø80 - Ø100 Ø63 - Ø80 - Ø100 AF AF L3 L3PL PL PL PL D 2 A D 2 A D F D F WH WH ZA+ ZA+ D 5 R T D 5 R T R T D 5 R T D 5 ZB+ ZB+ LA LA LA Ø20 - Ø25 Ø20 - Ø25 Ø32 Ø32 Ø40 - Ø50 Ø40 - Ø50 I10 Ø63 - Ø80 - Ø100 I10 Ø63 - Ø80 - Ø100 Dimensions D F AF D F AF L3 L3PL PL PL PL A A D 2 D 2 Ø D WH 10 WH ZA ZA Ø D2 9 ZB+ 9 9 ZB+ 9 LA LA 12 LA 12 Ø D D 5 R T Piston-Ø 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm A AF M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ I F M6 M6 M8 M8 M10 M10 M12 M12 M8 M8 M10 x 1.25 M10 x 1.25 M12 x 1.25 M12 x 1.25 M16 x 1.5 M16 x 1.5 LA L PL RT M5 M5 M6 M6 M8 M8 M10 M WH ZA ZB D 5 R T R T D 5 R T D 5 + plus stroke (mm)

18 Ø20 - Ø25 Ø20 - Ø25 Ø32 Ø32 Compact cylinders PDMB According to ISO 21287, double acting with through piston rod PDM_B Ø 20 to 100 mm PDMIB Piston rod with female thread Ø40 - Ø50 Ø40 - Ø50 PDMB Piston rod with male thread I10 Ø63 - Ø80 - Ø100 I10 Ø63 - Ø80 - Ø100 PL PL PL PL AF AF A A D F D F WH+ ZA+ WH+ WH ZA+ WH R T LA D 5 R T LA D 5 ZB+ ZB+ WH+ WH+ WH Ø20 - Ø25 Ø20 - Ø25 Ø32 Ø32 Ø40 - Ø50 Ø40 - Ø50 I10 Ø63 - Ø80 - Ø100 I10 Ø63 - Ø80 - Ø100 PL PL PL PL Dimensions AF AF A A F D D F Piston-Ø 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm A AF Ø D Ø D5 WH ZA+ WH+ 9 WH ZA+ 9 WH 10.5 LA LA ZB+ 49 ZB WH WH WH M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ I F M6 M6 M8 M8 M10 M10 M12 M12 M8 M8 M10 x 1.25 M10 x 1.25 M12 x 1.25 M12 x 1.25 M16 x 1.5 M16 x 1.5 LA PL RT M5 M5 M6 M6 M8 M8 M10 M WH WH ZA ZB R T D 5 R T D 5 + plus stroke (mm)

19 D10 D10 D8 D8 D8 D9 D9 D9 Compact Ø20 - Ø25 cylinders Ø20 - Ø25 PDMIF Ø D10 D10 D8 Ø32 D According to ISO 21287, double acting, non rotating piston rod PDMIF Ø 20 to 100 mm D10 D10 D10 D10 D8 D9 PDMIF Piston rod with female thread Ø40 - Ø50 L5 D7 L5 D7 D8 Ø40 - Ø50 PL D8 D9 I10 D9 Ø63 - Ø80 - Ø100 D8 PL PL I10 Ø63 - Ø80 - Ø100 D9 PL D 6 D 6 D D D 2 D 2 L4 WH ZA+ ZB+ L4 WH L3 S1 ZA+ ZB+ L3 R T LA S1 D 5 R T LA D 5 D10 D10 D10 D10 D8 D9 D8 D8 D9 D9 D8 D9 Ø20 - Ø25 Ø20 - Ø25 Ø32 Ø32 D10 D10 D10 D10 L5 D7 D8 Ø40 - Ø50 D9 L5 D7 D8 Ø40 - Ø50 PL D8 D9 I10 D9 Ø63 - Ø80 - Ø100 D8 PL PL I10 Ø63 - Ø80 - Ø100 D9 PL Dimensions D 6 D 2 D L4 L4 L3 L3 Ø D S LA S LA 13.5 WH ZA+ WH ZA+ ZB+ D 6 Piston-Ø 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm Ø D Ø D Ø D ZB+ Ø D D8 M4 M5 M5 M5 M6 M6 M8 M10 Ø D Ø D M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ I LA L L L PL RT M5 M5 M6 M6 M8 M8 M10 M10 S WH ZA ZB plus stroke (mm) D 2 R T D D 5 R T D 5

20 Compact cylinders PDMF According to ISO 21287, double acting, non rotating piston rod PDMIF Ø 20 to 100 mm Maximum torsion (Nm) 20 COPPIA Torque - WRNCH Ø050 COPPIA / WRNCH Ø100 Ø080 Ø063 Ø040 Ø032 Ø025 Ø M CORSA Stroke - STRO (mm)

21 Compact cylinders Non-standard versions Compact cylinders according to ISO Non-standard, delivery on request Double acting with non-rotating through piston rod Tandem cylinder, double force TM X1 = X2 Tandem cylinder, three positions PM X1 X2 Tandem cylinder four positions CM X1 X2 Cylinders made from stainless steel VS Cylinders for low temperature application TT Medium and environment to 30 C Cylinders for high temperature application HT Medium and environment to +150 C Compact cylinders according to UNITOP standard

22 Accessories for compact cylinders according to ISO Pos. Fixing element Type 1 Foot (one pair) MS1 refer to page 24 2 Flange MF1 MF2 refer to page 24 3 Trunnion mounting MT4N refer to page 27 4 Clevis flange with spherical bearing MP6 refer to page 26 5 Trunnion foot mounting (one pair) AT4 refer to page 27 6 Male hinge MP4 refer to page 24 7 Female hinge MP2 refer to page 25 8 Female hinge AB6 refer to page 25 9 Pin with seeger AA4 refer to page Pin with seeger non rotating AA6 refer to page Clevis foot mounting 90 AB7 refer to page Clevis foot mounting with spherical bearing US refer to page Rod clevis GF refer to page Universal rod eye for piston rod GS refer to page Flexible joint F refer to page Nut for piston rod DS refer to page Proximity switch M60 refer to chapter 1.4.2

23 Accessories for compact cylinders according to ISO Overview fixing elements Piston-Ø Type MF1 and 2 Type MS1 Type MP4 Type AB6 Type MP2 Type AA4 20 mm MF1/2-20 MS1-20 MP mm MF1/2-25 MS1-25 MP mm MF1/2-32 MS1-32 MP4-32 AB6-32 MP2-32 AA mm MF1/2-40 MS1-40 MP4-40 AB6-40 MP2-40 AA mm MF1/2-50 MS1-50 MP4-50 AB6-50 MP2-50 AA mm MF1/2-63 MS1-63 MP4-63 AB6-63 MP2-63 AA mm MF1/2-80 MS1-80 MP4-80 AB6-80 MP2-80 AA mm MF1/2-100 MS1-100 MP4-100 AB6-100 MP2-100 AA4-100 Piston-Ø Type AA6 Type MP6 Type AB7 Type US Type MT4N Type AT4 20 mm 25 mm 32 mm AA6-32 MP6-32 AB7-32 US-32 MT4N-32 L mm AA6-40 MP6-40 AB7-40 US-40 MT4N-40 L mm AA6-50 MP6-50 AB7-50 US-50 MT4N-50 L mm AA6-63 MP6-63 AB7-63 US-63 MT4N-63 L mm AA6-80 MP6-80 AB7-80 US-80 MT4N-80 L mm AA6-100 MP6-100 AB7-100 US-100 MT4N-100 L-100 Overview fixing elements for piston rod Piston-Ø Type GS Type GF Type F Type Nut 20 mm GS-M8 GF-M8 F-M8 DS-M8 25 mm GS-M8 GF-M8 F-M8 DS-M8 32 mm GS-M10 x 1.25 GF-M10 x 1.25 F-M10 x 1.25 DS-M10 x mm GS-M10 x 1.25 GF-M10 x 1.25 F-M10 x 1.25 DS-M10 x mm GS-M12 x 1.25 GF-M12 x 1.25 F-M12 x 1.25 DS-M12 x mm GS-M12 x 1.25 GF-M12 x 1.25 F-M12 x 1.25 DS-M12 x mm GS-M16 x 1.5 GF-M16 x 1.5 F-M16 x 1.5 DS-M16 x mm GS-M16 x 1.5 GF-M16 x 1.5 F-M16 x 1.5 DS-M16 x 1.5

24 Accessories for compact cylinders according to ISO Accessory flange cap-side MF1 Accessory flange head-side MF2 Aluminium, steel on request UF TF FB MF 1 R Type Piston- Ø A ±0.2 B ±0.2 C ±0.2 D ±0.2 ±0.2 MF1/ mm MF1/ mm F H 13 G H 13 H H 13 I ±0.2 L ±0.2 M H 11 Type Piston- Ø 1 Ø FB MF R TF UF MF1/ mm MF1/ mm MF1/ mm MF1/ mm MF1/ mm MF1/ mm Accessory foot, steel, zinc plated MS1 Type Piston- Ø C ±0.2 B ±0.2 D ±1 F ±1 G H 13 H ±0.2 I ±0.2 S ±0.5 T ±0.3 R U Z H 15 H 13 MS mm MS mm MS mm MS mm MS mm MS mm MS mm MS mm Dimensions according to ISO 15552, delivery: 1 pair Accessory male hinge with bushing MP4 Type Piston- Ø A ±0.2 L D H 13 R H 15 N G S F C ±0.5 H 11 ±0.2 Q F 7 M H 9 T max B MP mm MP mm MP mm MP mm MP mm MP mm MP mm MP mm

25 Accessories for compact cylinders according to ISO Accessory female hinge AB6 Type Piston- Ø L ±0.5 T d 12 CM H 14 A ±0.2 Z ±0.2 H +1 0 B D3 ±0.5 AB mm AB mm AB mm AB mm AB mm AB mm S H 12 G F 7 MR +1 0 D D2 TA TZ LI F min Accessory female hinge with bushings MP2 Type Piston- Ø A ±0.2 L D H 13 R H 13 N B S F Z ±0.5 H 11 ±0.2 MP mm MP mm MP mm MP mm MP mm MP mm G H 9 M max CM H 14 T h 14 Accessory pin with seeger for hinge MP2 AA4 Type Piston-Ø f7 L AA mm AA mm AA mm AA mm AA mm AA mm L Accessory pin with seeger non rotating for hinge AB6 AA6 Type Piston-Ø f7 d 4 H12 I I I 3 I AA mm AA mm AA mm AA mm AA mm AA mm

26 Accessories for compact cylinders according to ISO Accessory clevis flange with spherical bearing, aluminum MP6 Type Piston- Ø A ± 0.2 B max C JS 15 D H 7 N 8.1 R max F H 11 G H 13 L M H 13 N ± 0.5 P H ± 0.5 R ± 0.2 S Z T g MP mm MP mm MP mm MP mm MP mm MP mm Accessory clevis foot mounting 90, aluminum AB7 Type Piston- Ø Q H 13 M H 13 BG JS 14 BH max BI JS 14 BL BM JS 15 BN JS 14 AB mm AB mm AB mm AB mm AB mm AB mm BO max BS max BR max T max G H 9 S F BQ g Clevis foot mounting with spherical bearing, steel US Type Piston- Ø Q H 13 P H 13 BG JS 14 BH max BI JS 15 BL BM JS 15 BN JS 14 US mm US mm US mm US mm US mm US mm BO max N 8.1 R max BQ max D H 7 H S H 13 F g

27 4ϒ Z Accessories for compact cylinders according to ISO Accessory trunnion mounting (cap- and head-side), steel MT4N Accessory trunnion foot mounting, aluminum AT4 ø D 3 T 1 H2 H 1 H7 ø D 1 F x 45ϒ ø D 2 A B 1 B 2 C Type Piston- Ø A max AL max AH e9 AG h14 AF H11 AN H11 A ±0.2 B F H13 G H13 L MT4N mm MT4N mm MT4N mm MT4N mm MT4N mm MT4N mm B Type Piston- Ø A B1 B2 C Ø D1 Ø D2 Ø D3 fx45 H1 H2 T1 L mm L mm L mm L mm L mm L mm Delivery: 1 pair Accessory universal rod eye for piston rod GS C CN H 7 N - 0,1 Accessory rod clevis GF L C R CL CM R CL AX Z ø C h 11 Type Piston- Ø AX C Ø CN N 0.1 R Z GS-M8 20 mm M GS-M8 25 mm M GS-M10x mm M10x GS-M10x mm M10x GS-M12x mm M12x GS-M12x mm M12x GS-M16x mm M16x GS-M16x mm M16x Type Piston- Ø C Ø C h11 CL CM L R GF-M8 20 mm M GF-M8 25 mm M GF-M10x mm M10x GF-M10x mm M10x GF-M12x mm M12x GF-M12x mm M12x GF-M16x mm M16x GF-M16x mm M16x Accessory flexible joint F SW 3 SW 2 SW 4 SW 1 4ϒ L 2 B 1 L F Type Piston- Ø B1 F L ±2 L2 SW1 SW2 SW3 SW4 F-M8 20 mm M F-M8 25 mm M F-M10x mm M10x F-M10x mm M10x F-M12x mm M12x F-M12x mm M12x F-M16x mm M16x F-M16x mm M16x

28 Cylinders according to ISO DVP(M)/ DVPMB Standard cylinders according to ISO 15552, profiled tube. xtra-low friction design also available Universal use due to execution in accordance to ISO Proximity switches type M60 can be assembled into cylinder profile. DVP / DVPM DVP DVPM DVPMB Technical characteristics General characteristics Design profile cylinder Function Standard Low friction double acting with magnetic piston and cushioning * single acting without cushioning ** Piston-Ø Stroke Ports mm mm refer to dimensions, dimension Fixing according to ISO Mounting position Temperature range Materials used any 20 C + 80 C, below 0 C dried air only 0 C C (high temperature version) Seals made from FM in type DVPH only ndcaps: aluminum painted Tube: aluminum anodized Piston rod: stainless steel Seals: NBR Pneumatic characteristics Medium compressed air, filtered max. 50 µm Operating pressure Standard: 1 10 bar Low friction: 0,1 10 bar 316 Selected models are available in stainless steel. Please refer to JOYNR catalogue number 6. Standard strokes [mm] 25, 50, 80, 100, 125, 160, 200, 250, 320, 400, 500 * Single acting cylinders and ones without cushioning on request. ** Low friction cylinders are generally single acting, we offer two versions: Type L = pressure port in head and LD = pressure port in cap. Numbering system M = Magnetic piston DVP M B / L LD Stroke in mm } for low friction models Piston-Ø in mm B = Through piston rod H = C S = Non standard, e.g. low friction

29 Cylinders according to ISO DVP(M)/ DVPMB Type DVP / DVPM L 8 + stroke Nut DIN 439 Type DVPB / DVPMB with trough piston rod ZM + 2x stroke Dimensions Piston-Ø AM AP B e11 BG D2 G V W L 2 32 mm G 1/8 31 M10 x mm G 1/4 34 M12 x mm G 1/4 36 M16 x mm G 3/8 40 M16 x mm G 3/8 42 M20 x mm G 1/2 45 M20 x Piston-Ø L 8 L 12 PL R RT SW VA VD WH ZM Grundgewicht Gewicht/ 10 mm Hub 32 mm M mm M mm M mm M mm M mm M Hexagon index screw with female tapping for fixing elements included 2 Flow control for adjustable cushioning 3 Groove for proximity switch

30 Cylinders according to ISO DI(M)/ DIMB Standard cylinders according to ISO 15552, profiled tube. xtra-low friction design also available Universal use due to execution in accordance to ISO DI / DIM DI DIM DIMB Technical characteristics General characteristics Design tie-rod cylinder Function Standard Low friction double acting with magnetic piston and cushioning * single acting without cushioning ** Piston-Ø Standard: mm Low friction: mm Stroke Ports mm refer to dimensions, dimension Fixing according to ISO Mounting position Temperature range Materials used any 20 C + 80 C below 0 C dried air only 0 C C high temperature version ndcaps: aluminum painted Tube: aluminum anodized Piston rod: stainless steel Seals: NBR Seals made from FM in type DIH only Pneumatic characteristics Medium compressed air, filtered max. 50 µm Operating pressure Standard: 1 10 bar Low friction: 0,1 10 bar Standard strokes 25, 50, 80, 100, 125, 160, 200, 250, 320, 400, 500, 600, 700, 800, 900, * single acting cylinders and ones without cushioning on request. ** Low friction cylinders are generally single acting, we offer two versions: Type L = pressure port in head and LD = pressure port in cap. Numbering system M = Magnetic piston DI M B / L LD Stroke in mm } For low friction models Piston-Ø in mm B = Through piston rod H = C S = Non standard, e.g. low friction

31 Cylinders according to ISO DI(M)/ DIMB Type DI / DIM AM L12 1 BG PL R AP B D2 D4 B R SW Mutter Nut DIN 439 VD L2 WH G 2 2 L8 +Hub + stroke G VA RT Type DIB / DIMB with through piston rod ZM ZM+2xHub + stroke Dimensions Piston-Ø AM 0 0,2 AP B e11 BG D2 D4 G L 2 L mm G 1/2 53 M27 x ± mm G 3/4 59 M36 x ± mm G 3/4 61 M36 x ± mm G 1 61 M42 x ± mm G 1 63 M48 x ± 2.2 Piston-Ø L 12 PL R RT SW VA VD WH ZM Basic weight Weight/ 10 mm stroke 125 mm ± 1.1 M mm ± 1.1 M mm ± 1.1 M mm ± 1.5 M mm ± 1.5 M Hexagon index screw with female tapping for fixing elements included 2 Flow control for adjustable cushioning

32 Accessories for cylinders according to ISO Linear guide LFA

33 Accessories for cylinders according to ISO Pos. Fixing element Type mm mm 1 Foot (one pair) MS1 refer to page 38 refer to page 44 2 Flange MF1 - MF2 refer to page 38 refer to page 44 3 Clevis flange with spherical bearing MP6 refer to page 35 refer to page 41 4 Female hinge AB6 refer to page 25 refer to page 41 5 Female hinge MP2 refer to page 35 refer to page 42 6 Male hinge MP4 refer to page 36 refer to page 42 7 Two-piece joint, hinge and back support MP2/4 refer to page 37 refer to page 43 8 Two-piece joint, hinge and back support AB/MP6 refer to page 37 refer to page 43 9 Female hinge wide with back support UL refer to page 39 refer to page Female hinge wide with back support MZ refer to page 39 refer to page Back support with fixed bearing AB7 refer to page 39 refer to page Rod clevis GF refer to chapter refer to chapter 1.4.1* 12 Universal rod eye for piston rod GS refer to chapter refer to chapter 1.4.1* 13 Flexible joint F refer to chapter refer to chapter 1.4.1* 14 Proximity switch M60 refer to chapter refer to chapter Fastener for proximity switch BZ / BD refer to chapter refer to chapter Intermediate hinge MT4B / MT4A / MT4P refer to page 34 refer to page Trunnion foot mounting (one pair) AT4 refer to page 34 refer to page Pin with seeger AA4 refer to page 37 refer to page Pin with seeger non rotating AA6 refer to page 37 refer to page Trunnion mounting MT5 on request on request 21 Clevis foot mounting, fixed, thin AB 20 on request on request *) For piston-ø up to 125 mm. Refer to page 54 f. Refer to page 51 ff.

34 Accessories for cylinders according to ISO Accessory intermediate hinge MT4 P (in combination with cylinder type DIP/DIPM) XV + stroke Type Piston-Ø L1 TD e9 TL h14 TM h14 UW R max. XV MT4 P mm Weight MT4 P mm MT4 P mm MT4 P mm MT4 P mm MT4 P mm Accessory trunnion foot mounting AT4 Type Piston-Ø A B1 B2 C D1 F7 D2 H13 D3 H1 H T1 AT mm AT mm AT mm Weight AT mm AT mm AT mm Delivery: 1 pair

35 Accessories for cylinders according to ISO Accessory clevis flange with spherical bearing MP6 XD + stroke Type Piston-Ø CN H7 R N 0.1 FL H L R XD Weight MP mm MP mm MP mm MP mm MP mm MP mm Accessory female hinge for MP6 AB6 XD + stroke Position any Type Piston-Ø B 1 H14 B 2 d12 CN F FL R 1 +1 R 2 min. XD Weight AB mm AB mm AB mm AB mm AB mm AB mm Appropriate pin AA6, please refer to page 1-37

36 Accessories for cylinders according to ISO Accessory female hinge MP2 XD + stroke Appropriate pin AA4, please refer to page 1-37 Accessory male hinge MP4 XD + stroke Type Piston-Ø CB H14 CD H9 W FL L MR UB h14 XD Weight MP mm MP MP mm MP MP mm MP MP mm MP MP mm MP MP mm MP Type Weight

37 Accessories for cylinders according to ISO Accessory two-piece joint, hinge and back support MP2/4, alternatively with spherical bearing AB/MP6 XD + stroke Type Piston-Ø D H13 FL +0,2 0,2 L L2 +0,5 0,5 R H ,2 0,2 XD Weight MP2/ mm AB/MP Type Weight MP2/ mm AB/MP MP2/ mm AB/MP MP2/ mm AB/MP MP2/ mm AB/MP MP2/ mm AB/MP Accessory pin with seeger for MP2 AA4 Type Piston-Ø f7 L L Weight AA mm AA mm AA mm AA mm AA mm AA mm Accessory pin with seeger non rotating for AB6 AA6 Type Piston-Ø f7 d 4 H12 I I I 3 I Weight AA mm AA mm AA mm AA mm AA mm AA mm

38 Accessories for cylinders according to ISO Accessory flange cap-side MF1 Accessory flange head-side MF2 Position MF 2 Position MF 1 ZF + stroke Type Piston-Ø FB h13 MF UF R TF W ZF Weight MF1-032 / MF mm MF1-040 / MF mm MF1-050 / MF mm MF1-063 / MF mm MF1-080 / MF mm MF1-100 / MF mm Accessory foot MS1 XA + stroke SA + stroke Type Piston-Ø AB H14 AH AO AT AU SA TR XA Weight MS mm MS mm MS mm MS mm MS mm MS mm Delivery: 1 pair

39 Accessories for cylinders according to ISO Accessory female hinge wide with back support MZ alternatively with spherical bearing UL Type MZ = MP2 + AB7 + AA4 Type UL = AB6 + US + AA6 stroke Piston-Ø I 23 CA Weight Type Accessory with fixed bearing Weight 32 mm MZ UL mm MZ UL mm MZ UL mm MZ UL mm MZ UL mm MZ UL-100 Type Accessory with spherical bearing Accessory back support with fixed bearing AB7 Accessory back support with spherical bearing US Any direction ± 4 Please order: AB7 piston-ø Please order: US piston-ø olben Ø C H9 CN H7 d 2 M N 0.1 R U G 1 G 2 G 3 H I 5 R 1 S 5 H mm mm mm mm mm mm

40 Accessories for cylinders according to ISO Accessory intermediate hinge MT4 In combination with cylinder type DI/DIM for clamping (type B) or screwing (type A) XV + stroke For type A (screw version) please communicate dimension XV. Type Piston-Ø L1 TD e9 TL h14 TM h14 UW R max. XV MT4 A-125 / MT4 B mm MT4 A-160 / MT4 B mm MT4 A-200 / MT4 B mm MT4 Ø 125 for cylinder type DIP(M) also available. Weight MT4 A-250 / 250 mm MT4 A-320 / 320 mm Accessory trunnion foot mounting AT4 Type Piston-Ø A B1 B2 C D1 F7 D2 H13 D3 H13 H1 H T Weight AT mm AT mm AT mm AT mm Delivery: 1 pair

41 Accessories for cylinders according to ISO Accessory clevis flange with spherical bearing MP6 XD + stroke Type Piston-Ø CN H7 R N 0.1 FL L XD MP mm MP mm MP mm MP mm Weight Accessory female hinge for MP6 AB6 XD + stroke Position any Type Piston-Ø B 1 H14 B 2 d12 CN F FL R 1 +1 R 2 min. XD AB mm AB mm AB mm AB mm Weight

42 Accessories for cylinders according to ISO Accessory female hinge MP2 XD + stroke Accessory male hinge MP4 XD + stroke Type Piston-Ø CB H14 CD H9 W FL L MR UB h14 XD Weight MP mm MP MP mm MP MP mm MP MP mm MP MP mm MP Type Weight

43 Accessories for cylinders according to ISO Accessory two-piece joint, hinge and back support MP2/4, alternatively with spherical bearing AB/MP6 XD + stroke Type Piston-Ø D H13 FL L L R H XD Weight MP2/ mm AB/MP MP2/ mm AB/MP MP2/ mm AB/MP MP2/ mm AB/MP Type Weight Accessory pin with seeger for MP2 AA4 Type Piston-Ø e8 L L Weight AA mm AA mm AA mm AA mm AA mm Accessory pin with seeger non rotating for AB6 AA6 Type Piston-Ø f7 d 4 H12 I I I 3 I Weight AA mm AA mm AA mm AA mm

44 Accessories for cylinders according to ISO Accessory flange cap-side MF1 Accessory flange head-side MF2 Position MF 2 Position MF 1 ZF + stroke Type Piston-Ø FB h13 MF JS14 UF R TF W 370ZF MF1-125 / MF mm MF1-160 / MF mm MF1-200 / MF mm Weight MF1-250 / MF mm MF1-320 / MF mm Accessory foot MS1 XA + stroke SA + stroke Type Piston-Ø AB H14 AH JS15 AO AT AU SA TR JS14 XA MS mm MS mm MS mm MS mm Weight MS mm Delivery: 1 pair

45 Accessories for cylinders according to ISO Accessory female hinge wide with back support MZ alternatively with spherical bearing UL Type MZ = MP2 + AB7 + AA4 Type UL = AB6 + US + AA6 stroke Piston-Ø I 23 CA JS15 Weight Type Accessory with fixed bearing Weight 125 mm MZ UL mm MZ UL mm MZ UL mm MZ mm MZ-320 Type Accessory with spherical bearing Accessory back support with fixed bearing AB7 Accessory back support with spherical bearing US Any direction ± 4 Please order: AB7 piston-ø Please order: US piston-ø Pistom-Ø C H9 CN H7 d 2 M N 0.1 R U max G 1JS15 G 2JS15 G 3 H 6 1JS14 2 I 5max R 1max S 5H mm mm mm mm mm

46 Additional accessories for cylinders Fixing elements for the piston rod flexible joint, rod clevis, universal rod eye, nuts Type GF Type GS Type F Rod clevis Universal rod eye Flexible joint Item number Cylinder Piston-Ø Thread Rod clevis Universal rod eye Nut Flexible joint RI.. 8/10 M /16 M M M10 x PDM M M10 x M12 x M16 x DVP.. 32 M10 x M12 x /63 M16 x /100 M20 x DI M27 x * /200 M36 x * M42 x * M48 x * SDJ 20 M /40 M DUJ 30/40 M DUDJ 50/60 M M M M * M * M * DUVJ 40 M /60 M M M * M *

47 Additional accessories for cylinders Proximity switch, RD-switch 2 lines M60RV2 Direct assembly into groove of cylinder Compact design brown braun blue blau Voltage Technical characteristics General characteristics Design PNP Out with LD (yellow) Voltage V AC/DC I 400 ma at 25 C Max. power 10 W/8 VA Temperature range 25 C + 90 C Protection IP 67 (DIN 40050) Cable 3 m Material Body: PA, cable: PVC, PUR on request Attention: Applying higher voltage, flow or power to the switch will reduce life-time. Numbering system proximity switch M60 M60RV2TXA M MR To be added when cable is ordered with connector. Connector: 8 = M8, 12 = M12 30 = 3 m cable without connector (standard) other cable length on request 03 = 0.3 m cable with connector M8 or M12

48 Additional accessories for cylinders Proximity switch, RD-switch 3 lines M60RS3 Direct assembly into groove of cylinder Compact design black schwarz blue blau brown braun Technical characteristics General characteristics Design PNP Out with LD (yellow) Voltage 5 30 V DC I 400 ma at 25 C Max. power 10 W Temperature range 25 C + 90 C Protection IP 67 (DIN 40050) Cable 3 m Material Body: PA, cable: PVC, PUR on request Attention: Applying higher voltage, flow or power to the switch will reduce life-time. Numbering system proximity switch M60 M60RS3TXC M MR To be added when cable is ordered with connector. Connector: 8 = M8, 12 = M12 30 = 3 m cable without connector (standard) other cable length on request 03 = 0.3 m cable with connector M8 or M12

49 1.4.2 Additional accessories for cylinders lectronic proximity switch M60GMP Direct assembly into groove of cylinder Reliable short reaction time Wear-free Resistant against shake and shock LD pnp + black braun brown blau A black schwarz (out) (Ausgang) Technical characteristics General characteristics Design PNP Out with LD (yellow) Voltage 5 30 V DC I 150 ma max. Switching time < 0,5 ms Temperature range 25 C + 90 C Protection IP 67 (DIN 40050) Cable 5 m Material Body: PA, cable: PVC, PUR on request Numbering system proximity switch M60 M60GMPTXC M MR To be added when cable is ordered with connector. Connector: 8 = M8, 12 = M12 30 = 3 m cable without connector (standard) other cable length on request 03 = 0.3 m cable with connector M8 or M12

50 Additional accessories for cylinders Fasterns for proximity switch Type M60 Fastener BR for round cylinders type RIM Type Piston-Ø BR-08-M60 8 mm BR-10-M60 10 mm BR-12-M60 12 mm BR-16-M60 16 mm BR-20-M60 20 mm BR-25-M60 25 mm BR-32-M60 32 mm BR-40-M60 40 mm BR-50-M60 50 mm BR-63-M60 63 mm Piston-Ø Fastener BZ for tie-rod cylinder type DIM Type Piston-Ø Ø max. BZ-3263-M mm 7 BZ M mm 10 BZ-125-M mm 12 BZ M mm 16 BZ-250-M mm 20.5 BZ-320-M mm 25.5 Fastener BD for profile-cylinder type DVPM Type BD Piston-Ø mm

51 1.4.3 Additional accessories for cylinders Linear guide unit LFA Fits cylinders ISO 6432 piston-ø mm ISO piston-ø mm Technical characteristics General characteristics Design linear guide unit, 2 versions H = long, C = short (on request) Bearing G = sliding bearing, brass = ball bearing Materials Body and plate aluminum anodized, rods and coupling steel Temperature range 20 C + 80 C Standard strokes 25, 50, 80, 100, 160, 200, 250, 300, 400, 500 mm Numbering system guide & actuator type LFA The linear guide unit is used to avoid rotation of standard cylinders according to ISO 6432 and ISO as well as to take-on larger torque and force applied to the piston-rod. It offers a higher precision in handling equipment. To evaluate maximum load in relation to stroke, please refer to the diagrams on page 52. Numbering system linear guide unit LFA LFA Series LFA Ø16 to Ø100 H = Long design C = Short design Piston-Ø in mm Stroke in mm G = Sliding bearing = Ball bearing

52 Additional accessories for cylinders Maximum burden for linear guide units type LFA H (long) Maximum load in relationship to stroke Type G with sliding bearing Force F max. [N] Stroke [mm] Force F max. [N] Force F max. [N] Force F max. [N] Stroke [mm] Type with ball bearing Stroke [mm] Stroke [mm] Maximum burden for linear guide units type LFAC G (short with slide bearings) Maximum load in relationship to stroke On request Force F max. [N] Stroke [mm]

53 1.4.3 Additional accessories for cylinders Linear guide unit Type LFAH for cylinders ISO 6432 Ø L6 + stroke L7 + stroke L5 + stroke Dimensions Piston-Ø A B C Ch1 Ch2 Ch3 D D1 F G H ØI1 ØI2 J L1 L2 L3 L4 L5 L6 16 mm M4 M mm M5 M mm M5 M Version C Piston-Ø L7 M N O P Q R S T T1 U V W W1 X Y Z 16 mm mm mm Piston-Ø L1 L2 L6 W1 20 mm mm Linear guide unit Type LFAH for cylinders ISO Ø L6 + stroke L5 + stroke Dimensions Piston-Ø A B C Ch D F G H ØI L1 L2 L3 L4 L5 L6 32 mm mm mm mm mm mm Version C Piston-Ø N O P Q R T U V V1 Z 32 mm M mm M mm M mm M mm M mm M Piston-Ø L1 L2 L6 V1 32 mm mm mm mm mm mm

54 Additional accessories for cylinders Integrated guide and actuator Type AMCCG Double acting Piston-Ø mm Proximity switches can be used Technical characteristics General characteristics Design Function Materials linear guide unit with integrated actuator double acting, G = with sliding bearing, = with ball bearing body and plate aluminum: anodized, rods steel, seals: NBR, PUR Piston-Ø mm Position any Temperature range 20 C + 80 C Pneumatic characteristics Operation pressure 1 10 bar Medium compressed air, filtered max. 50 µm Magnetic piston yes Standard strokes [mm] Piston-Ø mm 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm Numbering system guide and actuator AMCCG AMCCG Series AMCCG Ø16 to Ø100 G = Sliding bearings = Ball bearings Stroke in mm Piston-Ø in mm

55 1.4.4 Additional accessories for cylinders Integrated guide and actuator Type AMCCG Ø 16 Ø 25 mm Switch Switch Dimensions (through) R = useable thread depth Q = useable thread depth B L3 Stroke Stroke Piston-Ø , mm mm mm Piston-Ø A C D 1 2 F F1 F2 F3 16 mm M mm / mm / Weight Piston- Ø * = + stroke Weight (g) stroke = 0 mm Weight (g) 1 mm stroke Piston-Ø G1 G2 H H1 L1 L2 M1 M2 N N1 N2 O1 O2 O3 P1 Q R S T1 T2 16 mm M mm M mm M Integrated guide and actuator Type AMCCG Ø 32 Ø 100 mm Switch Switch 4 x P2 (through) 4 x P1(through) 4 x P1 depth Q 4 x P1 depth R * = + stroke Dimensions Piston-Ø A ØD F F1 F2 F3 32 mm / mm / mm / mm / mm / mm / Weight Piston- Ø Weight (g) stroke = 0 mm Weight (g) 1 mm stroke 32 mm mm mm mm mm mm Piston-Ø G1 G2 H L1 L2 M1 M2 N P1 P2 Q R S L3 ØC B 32 mm M8 M mm M8 M mm M10 M mm M10 M mm M12 M mm M14 M

56 Additional accessories for cylinders Clamping unit for cylinder ISO 6432 Type MRL Clamping unit for double acting cylinders with piston-ø 20 mm and 25 mm. Rod lock functioning is of static type. It is necessary to stop the cylinder's rod before making the lock. It is possible to unblock the rod lock only if the forces in the piston are balanced, otherwise there can be accidents due to the irregular movement of the rod. If the given blocking values are exceeded there can be a sliding on the rod. When it is blocked and the loads are variable on the rod, the rod can have a slight axial play. Pressue range: 3 6 bar Temperature range: 5 C to +80 C Lubricated and unlubricated air. Required piston-rod extension: 54 mm Holding force at piston rod: 490 N Dimensions Type Piston-Ø Cylinder A B C D F G H L M N R MRL mm M22 x M MRL mm M22 x M

57 1.4.5 Additional accessories for cylinders Clamping unit for cylinder ISO Type VRL Clamping unit for double acting cylinders with piston-ø 32 mm to 125 mm. Rod lock functioning is of static type.it is necessary to stop the cylinder's rod before making the lock. It is possible to unblock the rod lock only if the forces in the piston are balanced, otherwise there can be accidents due to the irregular movement of the rod. If the given blocking values are exceeded there can be a sliding on the rod. When it is blocked and the loads are variable on the rod, the rod can have a slight axial play. Pressue range: 3 to 6 bar Temperature range: 5 C to +80 C Lubricated and unlubricated air. Type xtension of piston rod [mm] Holding force [N] VRL VRL VRL VRL VRL VRL VRL Dimensions Type Piston-Ø Cylinder A B C D F G H L M N O P Q VRL mm G 1/8 M VRL mm G 1/8 M VRL mm G 1/8 M VRL mm G 1/8 M VRL mm G 1/4 M VRL mm G 1/4 M VRL mm G 1/4 M

58 Cylinder-valve-combination High Flow Compact design Double acting / 5-way Technical characteristics General characteristics Medium compressed air quality-class for particles-water-oil according to ISO :2010 Operating pressure 2 10 bar eventually 3 bar due to restriction of certain valve-types Temperature range 10 C * + 50 C low- as well as high-temperature version on request. * Below 0 C dried air only. x-version on request The elements Profile cylinder type DVP/DVPM, refer to page 28 f. Tie-rod cylinders type DI/DIM, refer to page 30 f. ISO Solenoid valves with NAMUR-interface Proximity switches Connectors Mounting plates, flexible on piston-ø and stroke Advantages asy assemblage Maximum cylinder speed Countless cylinder-valve-combinations possible Service friendly Quickly available Standard interface according to NAMUR Cylinder types Single solenoid 5/2-way valve DVP DVPM MNH 510 MNH 511 refer to page 28 ff. refer to catalogue No f. Double solenoid 5/2-way valve 5/3-way valve MNH 520 MNH 531 refer to catalogue No refer to catalogue No You can find our wide range of valves with NAMUR-interface in the JOYNR catalogue No. 5

59 1-59 Pictures from valve manufacturing site in Hungary m 2 machine shop Latest CNC-machines and tools Assembly

60 JOYNR pneumatic GmbH Im Netzbrunnen 6 D orntal-münchingen Phone +49 (0) Fax +49 (0) Internet: Mail: info@joyner.de JOYNR pneumatic GmbH Schimmelbuschstraße 9 D rkrath Phone +49 (0) Fax +49 (0) Internet: Mail: erkrath@joyner.de TH JOYNR-RANG: Round cylinders Cylinders ISO Compact cylinders ISO Standard and clamping cylinders Rodless cylinders Valve terminals and manifold systems Spool valves Valves with NAMUR interface Manually and mechanically actuated valves -Rings and pistons Moving more than air OFFICIAL DISTRIBUTORS: NORDBADN, SAAR, PFALZ Hekomatic Drucklufttechnische Anlagen GmbH Marconistraße D Mannheim Phone +49 (0) Fax +49 (0) Mail: hekomatic@t-online.de NORDDUTSCHLAND Wille GmbH Ingenieurbüro für Drucklufttechnik Norderoog 4 D Bremen Phone +49 (0) Fax +49 (0) Mail: info@wille-gmbh.de dition 06/2016

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous

More information

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm > Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

Series 31 compact cylinders 1/

Series 31 compact cylinders 1/ Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting

More information

Sizes 32, 40, 50 and 63

Sizes 32, 40, 50 and 63 > Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

More information

Large Bore Extruded Cylinders, ISO 6431 Series 41

Large Bore Extruded Cylinders, ISO 6431 Series 41 Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

Tie rods cylinders to ISO standard Ø

Tie rods cylinders to ISO standard Ø Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

bar -20 C C ( C for high temperature version) 1000 mm

bar -20 C C ( C for high temperature version) 1000 mm Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

P1D-B Pneumatic Cylinders

P1D-B Pneumatic Cylinders P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series

More information

Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP

Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»

More information

-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.

-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...

More information

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552 PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and

More information

ISO Technical details

ISO Technical details Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

Our policy is one of continued research and development. We therefore reserve the right to amend,

Our policy is one of continued research and development. We therefore reserve the right to amend, Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed

More information

Profile Design Air Cylinder

Profile Design Air Cylinder Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

TELESCOPIC CYLINDERS ø mm Series RT

TELESCOPIC CYLINDERS ø mm Series RT TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a

More information

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect

More information

ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning

ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

TECHNICAL CHARACTERISTICS

TECHNICAL CHARACTERISTICS 2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution

More information

Standard cylinders DNG/DNGZS, ISO 15552

Standard cylinders DNG/DNGZS, ISO 15552 Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

LPRA/182000/M Double acting profile cylinders Ø mm

LPRA/182000/M Double acting profile cylinders Ø mm Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO

More information

Available: Cylinders till july 2000 Spares till july /98 N

Available: Cylinders till july 2000 Spares till july /98 N Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets

More information

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F

More information

LRM/55401/M, Roundline cylinder Magnetic piston, double acting

LRM/55401/M, Roundline cylinder Magnetic piston, double acting LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and

More information

ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on:

ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on: FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 15552 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: 218 1 17 Voting terminates on: 218 3 14 Pneumatic fluid power Cylinders with detachable mountings, 1

More information

Twin Rod Non Rotate Cylinders RDV and AZ

Twin Rod Non Rotate Cylinders RDV and AZ Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double

More information

ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning

ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,

More information

Our policy is one of continued research and development. We therefore reserve the right 1/98 N

Our policy is one of continued research and development. We therefore reserve the right 1/98 N ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:

More information

Our policy is one of continued research and development. We therefore reserve the right

Our policy is one of continued research and development. We therefore reserve the right Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE

More information

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned > Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

Stainless steel Cylinders Series 90

Stainless steel Cylinders Series 90 90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR

ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection

More information

Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm

Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed

More information

RM/900/M Heavy duty cylinders Ø 1 1/4... 4

RM/900/M Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications

More information

ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR

ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position

More information

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING

More information

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,

More information

Short-stroke cylinders ADVC/AEVC

Short-stroke cylinders ADVC/AEVC Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS

ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction

More information

Guide blocks for ISO/VDMA cylinders

Guide blocks for ISO/VDMA cylinders Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection

More information

Cylinders ISO Bores from 32 to 125 mm

Cylinders ISO Bores from 32 to 125 mm Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For

More information

Air Cylinders Type : ISO-6431 & VDMA-24562

Air Cylinders Type : ISO-6431 & VDMA-24562 Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

ISO Cylinders - P1D-B

ISO Cylinders - P1D-B Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

Page Product family Series Microcylinders 8 mm according to ISO 64 standard M mm according to ISO 6431 / VDMA 24562 standard K KD - 19 High-Tech Rotating pneumatic cylinders 1 mm R - Compact cylinders

More information

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure. series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500

More information

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting > > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance

More information

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / / Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

Description. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333

Description. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation

More information

PVA/182000, PVA/182000/M

PVA/182000, PVA/182000/M Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information