Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

Transcription

1 CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect linearity The Series 27 has been designed to reduce the cylinders sizes as much as possible. These cylinders have been constructed with clean lines using stainless steel for both the tube and the rod and Aluminium for the end-blocks. The choice of material and other design features have allowed to create a range of versatile and reliable cylinders. The precise method of securing the tube to the end block ensures that all the parts are perfectly aligned. Mechanical cushioning has been fitted on these cylinders in order to reduce noise produced by the piston impact on the end-blocks. Cylinders Series 27 are suitable for assembling with magnetic sensors. Various mounting bracket accessories enable the cylinders to be fitted to suit the requirements of a particular application. GENERAL DATA Type of construction Operation Materials Mounting Strokes min-max flanged double acting end-blocks = AL - rod and tube = stainless steel - piston = AL piston and rod seals = PU feet - trunnion - steel bar - pins all diameters mm Bores ø 20, 25, 32, 40, 50, 63 Operating temperature Operating pressure Speed Fluid 0 C 80 C (with dry air - 20 C) 0 bar mm/sec (no load) filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. /5.0.0

2 > Cylinders Series 27 CATALOGUE > Release 8.5 STANDARD STROKES FOR DOUBLE-ACTING CYLINDERS SERIES 27 Mod. 27M and 27T (ø 20 40) and Mod. 27U (ø 20 63) STANDARD STROKES Ø CODING EXAMPLE 27 M 2 A 20 A M 2 A 20 A 0050 SERIES VERSION M = rear end block upper round port for ø T = rear end block rear round port for ø U = rear end block upper round port for ø OPERATION 2 = double-acting MATERIALS A = rolled stainless steel rod - stainless steel tube BORE 20 = 20 mm - 25 = 25 mm - 32 = 32 mm - 40 = 40 mm - 50 = 50 mm - 63 = 63 mm TYPE OF DESIGN A = standard STROKE (see the table) PNEUMATIC SYMBOL CD08 PNEUMATIC SYMBOLS The pneumatic symbols which have been indicated in the CODING EXAMPLE are shown below. /5.0.02

3 CATALOGUE > Release 8.5 > Cylinders Series 27 ACCESSORIES FOR MAGNETIC CYLINDERS SERIES 27 Coupling piece Mod. GKF Self aligning rod Mod. GK Threaded trunnion pin Mod. T Piston rod socket joint Mod. GY Swivel ball joint Mod. GA Foot mount Mod. B Foot mount Mod. B Nose nut Mod. V Rear trunnion bracket Mod. I Piston rod lock nut Mod. U Rear trunnion bracket Mod. I Rod fork end Mod. G All accessories are supplied separately. /5.0.03

4 > Cylinders Series 27 CATALOGUE > Release 8.5 Cylinders Series 27 (Ø 20, 25, 32, 40) Ø AM Ø B BF BE Ø CDH9 D Ø EE EW G G KK L L6 MMh9 L5 PL SW VD WF XC+ XC+ XC2+ SW M6x,5 6 2,5 G\8 2 5,5 8 M8x, ,5 70, M8x,5 8 26,5 G\8 4 5,5 8 M0x, ,5 78, , M22x,5 8 33,5 G\8 6 7,5 5,5 M0x, M30x,5 0 4,5 G\ ,5 M2x, , Cylinders Series 27 (Ø 50, 63) Ø AM B Ø BG BG D Ø EE FB G KK Ø MMh9 PL RT RT SW TC TF VD WF XC ,5 G\4 M6 22 M2x, M0x , ,5 65,5 G\4 M8 22 M6x, M2x, , /5.0.04

5 CATALOGUE > Release 8.5 > Cylinders Series 27 Foot mount Mod. B x foot x front end cap nut mod. V Mod. Ø AB Ø AO AT AU NH SA+ TR US XA+ XS B , B , , B , B Foot mount Mod. B 2x feet 4x screws Mod. Ø AB Ø AO AT AU NH SA+ TR US XA+ XS B B Threaded trunnion pin Mod. T Material: stainless steel 2x pins Mod. Ø SW SW Ø TDh9 TL UT XG XJ+ T , T /5.0.05

6 > Cylinders Series 27 CATALOGUE > Release 8.5 Rear trunnion bracket Mod. I (Ø 20, 25, 32, 40) x female hinge x pin 2x Seeger Mod. Ø G G G2 G3 C XC+ AB Ø US NH CD Ø EW I ,5,5 77 5, I ,5 6, I ,6 20, I Rear trunnion bracket Mod. I 2x pins 2x feet Mod. Ø G G C XJ+ XG AB Ø K K K2 K3 NH UT I , I ,5 9 7, Rod fork end Mod. G ISO 840 Mod. Ø CK Ø LE CM CL ER CE KK B B Ø G M8x, G M0X, G M2X, G M6X, /5.0.06

7 CATALOGUE > Release 8.5 > Cylinders Series 27 Swivel ball joint Mod. GA ISO 839 Mod. Ø Ø CN(H7) U EN ER AX CE KK T Ø Z SW GA M8x,25 2,5 6,5 4 GA , M0X,25 5 6,5 7 GA M2X,25 7,5 6,5 9 GA M6X,5 22 7,5 22 Piston rod socket joint Mod.GY Material: zama and zinc-plated steel Mod. Ø KK L CE L2 AX E Ø B Ø C T D L L3 SW SW Z GY M8X, , GY M0X, , , GY M2X, , , GY M6X, , Piston rod lock nut Mod. U ISO 4035 Mod. Ø D m SW U M8X, U M0X, U M2X, U M6X, Nose nut Mod. V ISO 4035 V / V not according standard. Mod. Ø D m SW V M6X, V M8X, V M22X, V M30x,5 8 - /5.0.07

8 > Cylinders Series 27 CATALOGUE > Release 8.5 Self aligning rod Mod. GK Mod. Ø KK L L L3 L4 Ø A Ø D H I SW SW SW2 B AX Z E GK M8x, , GK M0x,25 7, , GK M2x,25 75, , GK M6x, Coupling piece Mod. GKF Mod. Ø KK A B R TF L L I Ø D Ø D Ø D2 SW E GKF M8x, , ,5-3,5 GKF M0x, ,5 5 6,8 8 6,6 5 2 GKF M2x, , ,5 GKF M6x, ,5 5 0, ,5 /5.0.08