ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
|
|
|
- Mariah Garrett
- 6 years ago
- Views:
Transcription
1 ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position detectors Fluid Air or neutral gas, fi ltered, lubricated or not Operating pressure 2 to bar Ambient temperature 0 C to +70 C (-) / - C to +70 C ( to ) Standards ISO CETOP RP 52 P - RP 2 P - RP 3 P AFNOR NF E Minimum pressure to compress the spring : 2 bar The return of the piston rod must be without load COTRUCTION Cylinder non-equipped Cylinder equipped arrel Stainless steel Non-magnetic stainless steel Rod Stainless steel Stainless steel Front and rear covers Anodized light alloy Anodized light alloy Piston POM (polyacetal) POM (polyacetal) and light alloy and light alloy equipped with permanent magnet Piston seals PUR (polyurethane) PUR (polyurethane) Neck nut Galvanized steel Galvanized steel Rod nut Galvanized steel Galvanized steel Dismounting Cannot be dismounted Cannot be dismounted Cushioning Without cushioning Without cushioning SPECIFICATIO SER SES Series 435 Type C-AS C-AS/DM stroke Cylinder non-equipped Cylinder equipped rod returned at rest (SER) rod out at rest (SES) connection catalogue number reference catalogue number reference C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SER/DM C AS - SES C AS - SES C AS - SES C AS - SES C AS - SES C AS - SES C AS - SES C AS - SES The magnetic position detectors must be ordered separately: UNI model, reed switch or magneto-resistive type (see page P295) or COMPACT model, reed switch or magneto-resistive type (see page P293) MOUNTINGS (see page 3) OPTIO Piston rod in hard chrome steel, catalogue number: in 3L stainless steel, catalogue number: 9902 in 303 stainless steel, catalogue number: 9952 Overlength piston rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : in 303 stainless steel, cat. n : 9954 Front through rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : 99 - in 303 stainless steel, cat. n : 9952 rear through rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : in 303 stainless steel, cat. n : P2-1
2 ISOCLAIR ROUND CYLINDERS to mm - double acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position detectors Fluid Air or neutral gas, fi ltered, lubricated or not Operating pressure bar max. Ambient temperature 0 C to +70 C (-) / - C to +70 C ( to ) Standards ISO CETOP RP 52 P - RP 2 P - RP 3 P AFNOR NF E COTRUCTION Cylinder non-equipped Cylinder equipped arrel Stainless steel Non-magnetic stainless steel Rod Stainless steel Stainless steel Front and rear covers Anodized light alloy Anodized light alloy Piston POM (polyacetal) POM (polyacetal) and light alloy and light alloy equipped with permanent magnet Piston seals PUR (polyurethane) PUR (polyurethane) Neck nut Galvanized steel Galvanized steel Rod nut Galvanized steel Galvanized steel Dismounting Cannot be dismounted Cannot be dismounted Cushioning Without cushioning Without cushioning SPECIFICATIO Series 435 Type C-AS C-AS/DM stroke Cylinder non-equipped Cylinder equipped catalogue number reference catalogue number reference connection C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM 4302 C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS -DM C AS C AS C AS -DM C AS -DM C AS 4303 C AS -DM C AS C AS C AS C AS C AS C AS -DM C AS -DM C AS -DM C AS -DM C AS 0-DM The magnetic position detectors must be ordered separately: UNI model, reed switch or magneto-resistive type (see page P295) or COMPACT model, reed switch or magneto-resistive type (see page P293) MOUNTINGS (see page 3) OPTIO Other strokes on request Double crossbar for -- mm (max. stroke 300 mm) arrel in stainless steel for -- mm : specify the codes of cylinders equipped for magnetic detectors. Anti-corrosive version, stainless steel type CIX (see page P2) Piston rod in hard chrome steel, catalogue number: in 3L stainless steel, catalogue number: 9902 in 303 stainless steel, catalogue number: 9952 Overlength piston rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : in 303 stainless steel, cat. n : 9954 Front through rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : 99 - in 303 stainless steel, cat. n : 9952 rear through rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : in 303 stainless steel, cat. n : P2-2
3 ISOCLAIR ROUND CYLINDERS - mm - double acting ISO 6432-CETOP-AFNOR with pneumatic cushioning FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position detectors Fluid Air or neutral gas, fi ltered, lubricated or not Operating pressure bar max. Ambient temperature - C to +70 C Standards ISO CETOP RP 52 P - RP 2 P - RP 3 P AFNOR NF E COTRUCTION Cylinder non-equipped Cylinder equipped arrel Stainless steel Non-magnetic stainless steel Rod Stainless steel Stainless steel Front and rear covers Anodized light alloy Anodized light alloy Piston POM (polyacetal) POM (polyacetal) and light alloy and light alloy equipped with permanent magnet Piston seals PUR (polyurethane) PUR (polyurethane) Neck nut Galvanized steel Galvanized steel Rod nut Galvanized steel Galvanized steel Dismounting Cannot be dismounted Cannot be dismounted Cushioning Pneumatic, adjustable Pneumatic, adjustable from both sides from both sides SPECIFICATIO stroke 0 Cylinder non-equipped Cylinder equipped catalogue number reference catalogue number reference C A C A C A C A C A C A C A C A C A C A -DM C A -DM C A -DM C A -DM C A -DM C A -DM C A -DM C A -DM C A 0-DM Series 435 Type C-A C-A/DM connection The magnetic position detectors must be ordered separately: UNI model, reed switch or magneto-resistive type (see page P295) or COMPACT model, reed switch or magneto-resistive type (see page P293) MOUNTINGS catalogue number Cushioning length: mm = mm mm = mm Front or rear fl ange MF High foot (peer unit) MS3 Rear trunnion Female rod clevis ISO RP 2 P AP2 Spherical bearing rod end ISO RP 3 P AP6 Neck nut MR Each cylinder is delivered with a neck nut. OPTIO Other strokes on request Piston rod in hard chrome steel, catalogue number: in 3L stainless steel, catalogue number: 9902 in 303 stainless steel, catalogue number: 9952 Overlength piston rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : in 303 stainless steel, cat. n : 9954 Front through rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : 99 - in 303 stainless steel, cat. n : 9952 rear through rod in hard chrome steel, cat. n : in 3L stainless steel, cat. n : in 303 stainless steel, cat. n : P2-3
4 DIMEIO DIMEIO, WEIGHT (kg) are cylinder (delivered with neck nut) T + 1 AM Z + 1 XC + 1 Y PJ + 1 WH F + 1 C EE S F EE D E SINGLE ROD CYLINDER EW E MM CD E C KK Z 3 C EW L L EW ZM + 2 AM WH F1 + 1 WH + 1 AM PK Stroke 2 2 x stroke 3 Dimensions across fl ats DOULE ROD CYLINDER AM C E F CD D EE EW F F1 KK L MM PJ PK S T WH Mx1, 4 H 9 1 d M4x0, Mx1, 4 H 9 1 d M4x0, Mx1, H 11 d 11 4,7 4,7 M6x ,5 34,5 3, Mx1, H d 11 55,7 52,7 M6x ,5 3,5 3 7, ,5 M22x1,5 17,5 H d 11 64,2 64,2 Mx1, 47,3 47,3 4 1, ,5 M22x1,5 17,5 H d 11 69,5 69,5 Mx1, 52,5 52, , 2 XC Y Z Z ZM (4) (5) 64 23, ,030 0, , ,030 0, ,5 93,4 0,070 0,090 1, ,5 97,4 0, 0, 95 32,5 13 3, ,170 0,0 4 36, ,5 0,0 0,0 (4) Cylinder with 0 mm stroke. (5) Weight to be added per additional mm length. NOTE: Single and double acting cylinders to mm have the same dimensions. The length of the SES version is twice the nominal stroke. The mountings are always delivered separately. P2-4
5 MOUNTING OPTIO DIMEIO, WEIGHT (kg) Front or rear mounting flange - MF AM ZF F MF MF UF TF Y UR W High foot mounting - MS3 Foot mountings are supplied in single units, not in pairs. UF1 NH/AH MF TR US 2 A AU XS SA' + 1 SA + 1 AM XA + 1 AO LA Stroke AM AO AU A F XA LA MF NH AH SA SA' TF TR UR UF UF1 US W XS Y ZF , , , ,5 90,5 96,5 4 2,5 34, , ,6 4,5 113,5 5 97,5 39, , ,6 113,5 2,5 5 2,5 44, ,5 front or rear flange foot front or rear flange foot 0,0 0,030 0,0 0,0 0,0 0,030 0,040 0, 0,0 0,0 0,040 0, P2-5
6 MOUNTING OPTIO DIMEIO, WEIGHT (kg) Rear trunnion mounting AM FA + 1 UA ω X H GC GL α U 2F EA + 1 GA GG 1 Stroke AM H EA FA F GA GC GG GL UA U X α ω 24 62,7 79 4,5 2,5, , ,7 79 4,5 2,5, , ,5 93 5, , ,5 5, , , , rear trunnion rear trunnion 0,0 0,0 0,0 0,0 0,0 0,0 P2-6
7 MOUNTING OPTIO DIMEIO, WEIGHT (kg) Female rod clevis - AP2 ISO RP 2 P CK H9/d E max. AV K max. CM LE CE KK CL Spherical bearing rod end - AP6 ISO RP 3 P EN h α α ;;;; ;;;;;;; ;;;;;; KK CN H9 AX CE1 LE1 Neck nut - MR3 KV E AV - AX E CE CE1 CK CL CM CN E EN K KK KV KW LE LE1 α 36 Mx1, ,4 0,1 5 22,5 11 M4x0, Mx1, ,4 0,1 5 22,5 11 M4x0, Mx1, ,4 0,1 6 33,5 9,5 M6x Mx1, ,4 0,1 6 33,5 9,5 M6x M22x1, ,5 0, Mx1, M22x1, ,5 0, Mx1, female clevis male clevis nut female clevis male clevis nut 0,0 0,0 0,0 0,0 0,030 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,030 0,0 0, 0,070 0,0 KW P2-7 ASCO/JOUCOMATIC reserves the right to alter the availability, design and specifi cations without notice.
ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
SHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
SHORT STROKE CYLINDERS Ø 8 to 100 mm - single acting with rod returned at rest NS
SHOT STOKE CYLINDES 8 to 0 mm single acting with rod returned at rest NS Series 1 Type K 00322G11/01 GENEAL Detection Fluid Operating pressure Ambient temperature CONSTUCTION ody Piston rod od end Internal
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
CYLINDERS WITH TIE RODS Ø 25 to 200 mm - double acting CNOMO AFNOR with pneumatic cushioning
CYLIDERS WITH TIE RODS 25 to 200 mm - double acting COO 06-07-02 - AFOR with pneumatic cushioning S Series 437 Type PC GEERAL Detection Equipped for magnetic position detectors Fluid Air or inert gas,
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Our policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
Our policy is one of continued research and development. We therefore reserve the right 10/99 N
Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry
AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
Profile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
Stainless Steel Cylinders Acid and Corrosion Resistant
Stainless Steel Cylinders Acid and Corrosion Resistant Subject to change 133 Stainless Steel Cylinders Contents Stainless Steel Double-Acting Cylinders per ISO 6432 Bores 12 to 25 mm Type CRDSNU... 137
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
STANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
L INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES
1-45 A IR CYLINDER BORE SIZES: Ø8, 10, 12, 16, 20, 25 Conforms to CETOP RP52P and ISO 6432 standards Double or single acting models High speed actuation Auto switch sensing optional Special shaped rod
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
STANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
SHORT STROKE CYLINDERS Ø 8 to 100 mm - single and double acting with single/double rod, antirotation device
SHOT STOKE CYINES 8 to 100 mm - single and double acting with single/double rod, antirotation device Series 441 GENEA etection luid Operating pressure Ambient temperature CONSTUCTION Body Piston rod od
RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Our policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
Cartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
CYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
Air-Oil Systems, Inc.
Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
RM/57200/M, RT/57200/M
Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control
ANTI-CORROSIVE CYLINDERS WITH TIE RODS Ø 32 to 125 mm - double acting - ISO with adjustable pneumatic cushioning
ANTI-CORROSIVE CYLINDERS WITH TIE RODS 32 to 125 mm - double acting - ISO 15552 with adjustable pneumatic cushioning NS Series S FEATURES The cylinders are designed for use in corrosive environments: chemical,
12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
VERSION 1 / Basic cylinder R Through rod. VERSION 2 D Double acting Y Single acting rear spring* S Single acting front spring
Stainless steel round cylinders with techno-polymer end caps (to ISO 6432 standard for Ø 6 25) DESCRIPTION Cylinders series UP are born as technological efficient reply to the always new needs of different
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
Available: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
PVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
Flat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
PNEUMATIC ACTUATORS Product Index
PNEUMATIC ACTUATORS Product Index B Products Type Illustration Series Page Micro-cylinders 2,5 to mm Micro 35 P5-1 Panel cylinders to 1 mm E 29 P2-1 Short-stroke cylinders 8 to 0 mm K 1 P215-1 Isoclair
Series 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
PRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
1/96 N Our policy is one of continued research and development. We therefore reserve the right
Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Compact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
LRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
Round Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
Multi-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature