RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

Size: px
Start display at page:

Download "RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm"

Transcription

1 Pneumatic cylinders ISO 6431, VDMA 456 and NFE Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and NFE High performance, stability and reliability ideal for the demands of today Supplied complete with piston rod locknut Comprehensive range of standard mountings Technical data Medium: Compressed air, filtered, lubricated or non-lubricated Standard: ISO 6431, VDMA 456, NFE Operation: Double acting A/8000: adjustable cushioning A/8000/M: magnetic piston, adjustable cushioning Operating pressure: 1 to 16 bar (1 to 10 bar for Ø 50 and 30 mm) Operating temperature: -0 to +80 C max. (Ø 3 to 15 mm) -10 to +80 C max. (Ø 160 to 30 mm) (consult our Technical Service for use below + C) Cylinder diameters: 3, 40, 50, 63, 80, 100, 15, 160, 00, 50, 30 mm Strokes: Standard: see page 3 Non-standard strokes (10 to 3000 mm) available Materials: Barrel: Anodised aluminium End covers: Pressure diecast aluminium (Ø 00 to 30 mm gravity cast aluminium) Piston rod: Stainless steel (Martensitic) Piston rod seals: Polyurethane (Ø 15 to 30 mm nitrile rubber) Piston seals: Polyurethane (Ø 15 to 30 mm nitrile rubber) O -rings: Nitrile rubber Ordering information See page 5 Mountings and Switches See page 4 and 5 Alternative variants Single acting cylinder see page N/UK Guide units See page N/UK Non-magnetic piston Magnetic piston N/UK

2 Cylinder variants Symbol Type Symbol Type Beschreibung Dimensions non-magnetic magnetic H T C S piston H T C S piston Page A/8000 A/8000/M Standard cylinder 7 A/8000/W1 A/8000/W Cylinder with special wiper/seal 7 suitable for applications with Arizona sand, cement, plaster (stucco), hoar-frost or ice (Ø 3 to 15) A/8000/X1 A/8000/X Low friction cylinders, operating pressure: 1 to 10 bar 7 Medium: compressed air, filtered and non-lubricated recommended (Ø 3 to 00) A/8000/IU A/8000/MU Cylinder with extended piston rod 7 A/8000/W5 A/8000/W6 Cylinder with extended piston rod and special wiper/ 7 seal, for applications with Arizona sand, cement, plaster (stucco), hoar-frost or ice (Ø 3 to 15) A/8000/G A/8000/MG Cylinder with piston rod bellows 8 A/8000/W A/8000/MW Cylinder owithout cushioning 7 A/8000/X3 A/8000/X4 Low friction without cushioning, 7 Operating pressure: 1 to 10 bar, Medium: compressed air, filtered and non-lubricated recommended (Ø 3 to 00) A/8000/J A/8000/JM Cylinder with double ended piston rod 8 A/8000/W3 A/8000/W4 Cylinder with double ended piston rod and special wiper/ 8 seal, suitable for applications with Arizona sand, cement, plaster (stucco), hoar-frost or ice (Ø 3 to 15 mm) A/8000/IT A/8000/MT Four position cylinder (Ø 3 to 00 mm) 8 A/8000/N1 A/8000/N Cylinder with non-rotating piston rod 8 (Ø 3 to 100 mm) For combinations of cylinder variants consult our Technical Service. For types H*1), T, and C, S see options selector *1) type H: Ø 3 to 100 mm A/8000/L A/8000/L4 Cylinder with locking unit (passive). 9 Locking is achieved by spring force on removal of the signal to the unit. Operating Pressure for locking unit: 4 to 10 bar (Ø 3 to 15 mm) Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NOGEN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

3 Options selector A/8 / / Special variants High temperature version: 150 C max. Substitute T Strokes (mm) 3000 max. Piston rod material Stainless steel (martensitic) Hard chromium plated Stainless steel (austenitic) Substitute C S Cylinder Ø (mm) Substitute 03, 040, 050, 063, 080, 100, 15, 160, 00, 50, 30 Variants (magnetic piston) Substitute Standard M Special wiper/seal W Low friction X Piston rod bellow MG Without cushioning MW Without cushioning, low friction X4 Double ended piston rod JM Double ended piston rod, special wiper/seal W4 Four position MT Non-rotating piston rod N Locking unit L4 Extended piston rod MU Extended piston rod, special wiper/seal W6 **A/8***/MU/****/*** /W6/ Extension (mm) Variants (non-magnetic piston) Substitute Standard Special wiper/seal W1 Low friction X1 Piston rod bellow G Without cushioning W Without cushioning, low friction X3 Double ended piston rod J Double ended piston rod, special wiper/seal W3 Four position IT Non-rotating piston rod N1 Locking unit L Extended piston rod IU Extended piston rod, special wiper/seal W5 **A/8***/IU/****/*** /W5/ Extension (mm) Note: If option is not required, disregard option position within part number, eg. A/8100/100. For combinations of cylinder variants consult our Technical Service. Please note that heat resistant seals are not available for all variants. This options selector explains only the cylinder variants. Additional variants/options can not be derived from. Standard strokes Cylinder Strokes (mm) Ø N/UK

4 Mountings Style A Style AK Style B, G Style C Style D Style D Style F Style FH Style H Cylinder Ø Page 10 Page 10 Page 10 Page 10 Page 11 Page 11 Page 11 Page 11 Page 1 3 QM/803/35 QM/805/38 QA/803/ QA/803/1 QA/803/3 QA/803/4 QM/805/5 QA/803/34 QA/803/8 40 QM/803/35 QM/8040/38 QA/8040/ QA/8040/1 QA/8040/3 QA/8040/4 QM/8040/5 QA/8040/34 QA/8040/8 50 QM/8050/35 QM/8050/38 QA/8050/ QA/8050/1 QA/8050/3 QA/8050/4 QM/8050/5 QA/8050/34 QA/8050/8 63 QM/8050/35 QM/8050/38 QA/8063/ QA/8063/1 QA/8063/3 QA/8063/4 QM/8050/5 QA/8063/34 QA/8063/8 80 QM/8080/35 QM/8080/38 QA/8080/ QA/8080/1 QA/8080/3 QA/8080/4 QM/8080/5 QA/8080/34 QA/8080/8 100 QM/8080/35 QM/8080/38 QA/8100/ QA/8100/1 QA/8100/3 QA/8100/4 QM/8080/5 QA/8100/34 QA/8100/8 15 QM/815/35 QM/815/38 QM/815/ QM/815/1 QM/815/3 QA/815/4 QM/815/5 QA/815/34 QM/815/8 160 QM/8160/35 QM/8160/38 QM/8160/ QM/8160/1 QM/8160/3 QA/8160/4 QM/8160/5 QM/8160/8 00 QM/8160/35 QM/8160/38 QM/800/ QM/800/1 QM/800/3 QA/800/4 QM/8160/5 QM/800/8 50 QM/850/35 QM/850/ QM/850/1 QM/850/3 QM/850/5 QM/850/8 30 QM/830/35 QM/830/ QM/830/1 QM/830/3 QM/830/5 QM/830/8 Style Style S Style SS Style SW Style UF Style UH Style U Style US Cylinder Ø Page 1 Page 1 Page 13 Page 13 Page 13 Page 1 Page 13 Page 13 3 QA/803/7 QA/803/41 M/P19931 M/P19493 QM/805/3 QA/803/40 QA/803/33 M/P QA/8040/7 QA/8040/41 M/P1993 M/P19494 QM/8040/3 QA/8040/40 QA/8040/33 M/P QA/8050/7 QA/8040/41 M/P19933 M/P19495 QM/8050/3 QA/8050/40 QA/8050/33 M/P QA/8063/7 QA/8063/41 M/P19934 M/P19496 QM/8050/3 QA/8063/40 QA/8063/33 M/P QA/8080/7 QA/8063/41 M/P19935 M/P19497 QM/8080/3 QA/8080/40 QA/8080/33 M/P QA/8100/7 QA/8100/41 M/P19936 M/P19498 QM/8080/3 QA/8100/40 QA/8100/33 M/P QM/815/7 QA/8100/41 M/P19937 M/P19499 QM/815/3 QA/815/40 QM/815/33 M/P QM/8160/7 QA/8160/41 M/P19938 M/P19679 QM/8160/3 QA/8160/40 QM/8160/33 M/P QM/800/7 QA/8160/41 M/P19939 M/P19683 QM/8160/3 QA/800/40 QM/800/33 M/P M/P19446 QM/850/3 QM/850/33 30 M/P19447 QM/830/3 QM/830/33 Brackets for switches Guide unit *1) *) *3) Cylinder 3 19 Ø Page 14 Page 14 Page 14 See datasheet QM/7//1 QM/31/03/ QM/140/010/ 40 QM/7//1 QM/31/03/ QM/140/010/ 50 QM/7//1 QM/31/03/ QM/140/010/ 63 QM/7//1 QM/31/03/ QM/140/010/ 80 QM/7//1 QM/31/080/ QM/140/010/ 100 QM/7//1 QM/31/080/ QM/140/010/ 15 QM/7//1 QM/31/080/ 160 QM/7//1 QM/31/160/ 00 QM/7//1 QM/31/160/ 50 QM/31/50/ 30 QM/31/30/ *1) M/50 *) TQM/31, QM/3 oder QM/13 *3) QM/140 N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

5 N/UK

6 Switches With cable With connector Cable/ Type Voltage Current Temperature LED Features Connector Cable Cable with eed Solid state V a.c. V d.c. max. C length type Connector Datasheet M/50/LSU/*V 10 to to ma -0 to +80, 5, 10 m PVC x 0,5 N/UK M/50/LSU/5U 10 to to ma -0 to m PU x 0,5 N/UK TM/50/AU/S 10 to to ma -0 to +150 m Silicone x 0,5 N/UK M/50/AC/5V 10 to to ma -0 to +80 Changeover 5 m PVC 3 x 0,5 N/UK M/50/LSU/CP 10 to to ma -0 to +80 Plug M8x1 5 m PVC 3 x 0,5 M/P73001/5 N/UK M/50/EAP/*V 10 to ma -0 to +80 PNP, 5, 10 m PVC 3 x 0,5 N/UK M/50/EAP/CP 10 to ma -0 to +80 PNP, Plug M8x1 5 m PVC 3 x 0,5 M/P73001/5 N/UK M/50/EAP/CC 10 to ma -0 to +80 PNP, Plug M1x1 5 m PVC 3 x 0,5 M/P34614/5 N/UK M/50/EAN/*V 10 to ma -0 to +80 NPN, 5, 10 m PVC 3 x 0,5 N/UK M/50/EAN/CP 10 to ma -0 to +80 NPN, Plug M8x1 5 m PVC 3 x 0,5 M/P73001/5 N/UK * Please insert cable length Further information (technical data, cable material, dimensions) see datasheet. Magnetically operated switches With cable With connector (M1x1) Cable/ Type Voltage Current Temperature LED Features Connector Cable Cable with eed Solid state V a.c. V d.c. max. C length Type Connector Datasheet TQM/31/* 10 to to 40 A -0 to +150 High temperature 5 m Silicone x0,75 N/UK QM/3/* 10 to to 40 1 A -0 to +80, 5, 10 m PVC x 0,75 N/UK QM/3/5/PU 10 to to 40 1 A -0 to m PU x 0,75 N/UK QM/3/P 10 to to 40 1 A -0 to m PVC 3 x 0,34 M/P3469/5 N/UK QM/13/* 10 to 30 0, A -0 to +80 PNP, 5, 10 m PVC 3 x 0,35 N/UK QM/13/5/PU 10 to 30 0, A -0 to +80 PNP 5 m PU 3 x 0,34 N/UK QM/13/P 10 to 30 0, A -0 to +80 PNP 5 m PVC 3 x 0,34 M/P3469/5 N/UK QM/13/E/5 10 to 30 0, A -0 to +80 Pulse stretcher 5 m PVC 3 x 0,35 N/UK QM/13/S/5 0 to ma -0 to m PVC x 0,75 N/UK * Please insert cable length Further information (technical data, cable material, dimensions) see data sheet. Pneumatically operated switch Type Pneumatic Operating pressure Flow rate Orifice size Temperature LED Connections Datasheet QM/140 to 6 bar 40 l/min mm +60 C for 3 mm I/D tubing N/UK * Please insert cable length Further information (technical data, cable material, dimensions) see data sheet. Ordering information Cylinders To order a basic 80 mm bore magnetic piston cylinder with a 50 mm stroke quote: A/8080/M/50 Mountings To order a front flange mounting style G for 80 mm bore cylinder quote: QA/8080/ Switches To order a reed switch with LED and m cable length quote: M/50/LSU/V Brackets for switches To order a bracket for magnetically operated switches M/50/LSU/V; 80 mm bore cylinder quote: QM/7//1 N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

7 Theoretical forces, cushioning, air consumption Type Cylinder Theoretical forces (N) at 6 bar Cushion length Initial cushion Air consumption (l/cm stroke) at 6 bar Ø outstroke instroke (mm) volume (cm 3 ) outstroke instroke A/803/ ,3 0,056 0,048 A/8040/ ,7 0,088 0,074 A/8050/ ,137 0,114 A/8063/ ,18 0,195 A/8080/ ,35 0,3 A/8100/ ,55 0,51 A/815/ ,86 0,79 A/8160/ ,41 1,3 A/800/ ,0,10 A/850/ ,44 3,30 A/830/ ,63 5,41 Basic dimensions A/8000, A/8000/M Standard cylinder A WH L8 + # A - B AM L VD L 1 PL G EE 1 G PL EE VA E KW ø B e 11 KK AP ø BA e 11 MM h 9 KV SW L 9 BG T BH B T BH # stroke 1 cushion screw ø mm BG Type Ø AM AP Ø Be11 Ø BAe11 BG BH E EE G KK KV KW L A/803/. 3 3, G 1/8 7,5 M10x1, A/8040/ , G 1/4 3 M1x1, A/8050/ G 1/4 31 M16x1, A/8063/ , G 3/8 33 M16x1, A/8080/ , , G 3/8 33 M0x1, A/8100/ , G 1/ 37 M0x1, A/815/ G 1/ 46 M7x 41 13,5 45 A/8160/ , ,5 G 3/4 50 M36x A/800/ ,5 3 4 G 3/4 50 M36x A/850/ , G 1 58 M4x A/830/ , G 1 60 M48x Type Ø L8 L9 L1 Ø MMh 9 PL T SW VA VD WH at 0 mm per 5 mm A/803/ ,5 M ,51 kg 0,06 kg A/8040/ , M , ,80 kg 0,08 kg A/8050/ ,5 46,5 M , ,33 kg 0,1 kg A/8063/ ,5 M ,80 kg 0,13 kg A/8080/ M ,5 kg 0,0 kg A/8100/ M ,81 kg 0,3 kg A/815/ ,5 110 M ,5 65 8,00 kg 0,33 kg A/8160/ M ,9 kg 0,55 kg A/800/ M ,7 kg 0,60 kg A/850/ M ,6 kg 0,9 kg A/830/ M ,8 kg 1,46 kg N/UK

8 Alternative variants A/8000/J, A/8000/JM Cylinder with double ended piston rod Type Ø ZM L8 A/803/J./ A/8040/J./ A/8050/J./ A/8063/J./ A/8080/J./ A/8100/J./ A/815/J./ A/8160/J./ A/800/J./ A/850/J./ A/830/J./ ZM + x # L 8 + # # Hub A/8000/N1, A/8000/N Cylinder with non-rotating piston rod Type Ø Torque max. (Nm) A/803/N./ ,5 A/8040/N./ ,0 A/8050/N./ ,5 A/8063/N./ ,5 A/8080/N./ ,5 A/8100/N./ ,5 A B A - B A/8000/IT, A/8000/MT Four position cylinder Type Ø L 8 L 10 L 11 A/803/.T/ A/8040/.T/ A/8050/.T/ A/8063/.T/ A/8080/.T/ A/8100/.T/ A/815/.T/ A/8160/.T/ A/800/.T/ L 10 + #1 + # L 8 + #1 L11 L 8 + # # stroke A/8000/G und A/8000/MG Cylinder with piston rod bellows Type Ø Ø A Max. Piston rod stroke extension B per for for bellow first further bellow bellow A/803/.G/ A/8040/.G/ A/8050/.G/ A/8063/.G/ A/8080/.G/ A/8100/.G/ A/815/.G/ A/8160/.G/ A/800/.G/ A/850/.G/ A/830/.G/ øa B N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

9 A/8000/L, A/8000/L4 Cylinder with locking unit (passive) AB L 8 + # Ø AJ EE AN ø B e 11 E1 T AM VD AD AE AG WH AF AH AK AL E # stroke Type Ø AB AD AE AF AG AH Ø AJ AK AL AM AN A/803/L./ , 48 5 M A/8040/L./ , , M ,5 10 A/8050/L./ , M A/8063/L./ , M A/8080/L./ M A/8100/L./ M A/815/L./ M Type Ø Ø B e11 E E 1 EE L 8 T VD WH Locking force A/803/L./ M ,5 M N A/8040/L./ G 1/ M N A/8050/L./ G 1/ ,5 M N A/8063/L./ G 1/ ,5 M N A/8080/L./ G 1/ M N A/8100/L./ G 1/ M N A/815/L./ G 1/ M N N/UK

10 Mountings Front or rear stud mounting A Conforms to DIN ISO 6431, Type MX1 Piston rod swivel AK BB DD TG TG KK KK 4 B 1 F L L Style (A) Ø BB DD TG kg QM/803/35 3/40 17 M6 3,5/38 0,0 QM/8050/35 50/63 3 M8 46,5/56,5 0,05 QM/8080/35 80/100 8 M10 7/89 0,08 QM/815/ M ,14 QM/8160/35 160/00 4 M16 140/175 0,31 QM/850/ M0 0 0,9 QM/830/ M4 70 1,46 Typ (AK) Ø KK B1 F L L kg QM/805/38 3 M10x1, ,0 QM/8040/38 40 M1x1, ,0 QM/8050/38 50/63 M16x1, ,65 QM/8080/38 80/100 M0x1, ,7 QM/815/38 15 M7x 13, ,70 QM/8160/38 160/00 M36x ,40 Front flange B, G Conforms to DIN ISO 6431 or VDMA 456 part type MF1 and MF Foot mounting C Conforms to and DIN ISO 6431 or VDMA 456 part, type MS1 MF UF TF FB AT E AH AU AO ø AB T E Style (B, G) Ø E Ø FB MF TF UF kg QA/803/ ,5 QA/8040/ ,35 QA/8050/ ,70 QA/8063/ ,80 QA/8080/ ,35 QA/8100/ ,0 QM/815/ ,70 QM/8160/ ,10 QM/800/ ,60 QM/850/ ,40 QM/830/ ,6 Typ (C) Ø Ø AB AH AO AT AU E T kg QA/803/ ,15 QA/8040/ ,18 QA/8050/ ,30 QA/8063/ ,39 QA/8080/ ,80 QA/8100/ ,95 QM/815/ ,40 QM/8160/ ,50 QM/800/ ,5 QM/850/ ,50 QM/830/ ,0 N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

11 ear clevis D Conforms to DIN ISO 6431 and VDMA 456 part, Type MP ear clevis D Conforms to VDMA 456 part LH UB CB H 14 FL L B B1 H 14 FL 1 EK f 8 B3 EK h 9 M Style (D) Ø CB H14 Ø EK f8 FL L LH M UB kg QA/803/ ,11 QA/8040/ ,16 QA/8050/ , QA/8063/ ,34 QA/8080/ ,54 QA/8100/ ,90 QM/815/ ,70 QM/8160/ , ,30 QM/800/ ,10 QM/850/ ,0 QM/830/ ,5 Style (D) Ø B1 H14 B B3 Ø EK h9 FL 1 kg QA/803/ , ,0 QA/8040/ , ,3 QA/8050/ , ,5 0,36 QA/8063/ , ,55 QA/8080/ , ,90 QA/8100/ , ,45 QA/815/ , ,70 QA/8160/ , ,30 QA/800/ , ,10 Piston rod clevis F Conforms to DIN ISO 8140 Front or rear detachable trunnion FH Conforms to VDMA 456 part, type MT 5/6 CE LE K CL CM ø CK h11 L 1 CL KK UW 1 TD e 9 E TL D H11 TM h14 Style (F) Ø KK CE Ø CKh11 CL CM E LE K kg QM/805/5 3 M10x1, ,09 QM/8040/5 40 M1x1, ,13 QM/8050/5 50/63 M16x1, ,5 0,33 QM/8080/5 80/100 M0x1, ,67 QM/815/5 15 M7x ,35 QM/8160/5 160/00 M36x ,00 QM/850/5 50 M4x ,40 QM/830/5 30 M48x ,70 Style (FH) Ø Ø Dh11 L1 Ø TDe9 TL TM h14 UW1 kg QA/803/ ,0 QA/8040/ , ,38 QA/8050/ , ,60 QA/8063/ , ,10 QA/8080/ , ,90 QA/8100/ ,50 QA/815/ ,50 N/UK

12 Centre trunnion H Conforms to SO 6431 and VDMA 456 part UW ø TD e 9 L TL TM h 14 Grease nippel up to Ø 15 mm Adjustable intermediate trunnion mounting UH Conforms to SO 6431 and VDMA 456 part Type (H) Ø L Ø TD e9 TL TM h14 UW XV XV kg min. max. QA/803/ ,16 QA/8040/ , ,35 QA/8050/ , ,65 QA/8063/ , ,85 QA/8080/ , ,0 QA/8100/ ,30 QM/815/ ,30 QM/8160/ , ,30 QM/800/ , ,40 QM/850/ , ,0 QM/830/ , ,0 Note: Style H : These mountings are only supplied assembled complete with the cylinder. Unless otherwise specified, units will be supplied with dimension XV plus half the stroke length. XV = Distance from the piston rod shoulder to the centre of the mounting. UW ø TD e 9 L TL TM h 14 Grease nippel up to Ø 15 mm 3 Locking screws Torque max Ø 3 & 40 mm = 6 Nm Ø 50 & 63 mm = 10 Nm Ø 80 & 100 mm = 15 Nm Ø 15 mm = 5 Nm Ø 160 & 00 mm = 40 Nm 3 Style UH : It is most important that the locking screws which secure the mounting to the tie rod are tightened to the torque figures shown in the table below. For maximum energy input, consult our Technical Service. ear eye Conforms to DIN ISO 6431 or VDMA 456 part, type MP4 Trunnion support S Conforms to VDMA 456 part EW FL L ø D 3 CD H 9 T 1 H Type (UH) Ø L Ø TD e9 TL TM h14 UW XV XV kg min. max. QA/803/ ,16 QA/8040/ , ,35 QA/8050/ , ,65 QA/8063/ , ,85 QA/8080/ , ,0 QA/8100/ ,30 QM/815/ ,30 QM/8160/ , ,30 QM/800/ , ,40 H 1 H7 ø D 1 F x 45 M ø D A B 1 B C Style () Ø Ø CD H9 EW FL L M kg QA/803/ , ,09 QA/8040/ , ,11 QA/8050/ , ,17 QA/8063/ , ,4 QA/8080/ , ,37 QA/8100/ , ,59 QA/815/ , ,0 QA/8160/ , ,5 30 6,10 QA/800/ , ,80 Type (S) Ø A B1 B C Ø Ø Ø F x 45 H1 H T1 kg D1 H7 D D3 QA/803/ ,5 1 6, ,8 0,10 QA/8040/41 40/ , ,14 QA/8063/41 63/ , ,18 QA/8100/41 100/ , ,34 QA/8160/41 160/ , , ,5 1,90 N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

13 Z A/8000, A/8000/M Universal piston rod eye UF Conforms to DIN ISO 8139 CE Universal rear eye U Conforms to VDMA 456 part EN FL CN H 7 EN -0,1 Narrow hinge SS ø CK H 9 EM G 1 ø CN G 7 EM KK CN H 7 Z Z Z E LE AX E Style (UF) Ø Gewinde AX CE Ø EN -0,1 E LE Z kg KK CN H7 QM/805/3 3 M10x1, ,09 QM/8040/3 40 M1x1, ,13 QM/8050/3 50/63 M16x1, ,33 QM/8080/3 80/100 M0x1, ,67 QM/815/3 15 M7x ,35 QM/8160/3 160/00 M36x ,00 QM/850/3 50 M4x ,40 QM/830/3 30 M48x ,70 Style (U) Ø Ø CN H7 EN E FL Z kg QA/803/ ,5 13 0,15 QA/8040/ ,5 QA/8050/ ,40 QA/8063/ ,55 QA/8080/ ,90 QA/8100/ ,50 QM/815/ ,70 QM/8160/ ,6 QM/800/ ,3 QM/850/ ,5 QM/830/ ,0 Wide hinge SW Conforms to VDMA 456 part G 1 L 1 ø D ø S K 1 K CA H G G 3 L 1 ø D ø S K 1 K CA H G G 3 Typ (SW) Ø CA Ø Ø H EM G1 G G3 K1 K L1 Ø kg CK H9 D S M/P , ,6 10 6,6 0,05 M/P , ,6 11 6,6 0,07 M/P , , ,14 M/P , , ,18 M/P , , ,8 M/P , , ,4 M/P , , 14,70 M/P , ,30 M/P , ,00 M/P *1) , ,4 M/P *1) , ,0 Typ (SS) Ø CA Ø Ø H EM G1 G G3 K1 K L1 Ø kg CN G7 D S M/P ,6 10 6,6 0,15 M/P ,6 11 6,6 0,0 M/P , ,48 M/P , ,50 M/P , ,75 M/P , ,0 M/P , 14,50 M/P ,00 M/P ,60 Swivel hinge US Conforms to VDMA 456 part EN -0,1 L 1 ø CN H 7 ø D EU ø S K 1 K Z Z CH H E G 1 G G 3 Typ (US) Ø CH Ø Ø EN-0,1 E EU G1 G G3 H K1 K L1 Ø Z kg CN H7 D S M/P , ,6 6,6 13 0,19 M/P ,6 6,6 13 0,4 M/P , ,46 M/P , ,59 M/P , ,03 M/P , ,40 M/P , ,10 M/P ,40 M/P ,10 N/UK

14 A Brackets QM/7//1 Bracket Switches: M/50 Cylinder Ø A B Weight ,010 kg ,010 kg ,010 kg ,010 kg ,010 kg 100 0,010 kg ,010 kg ,010 kg ,010 kg 1 Bracket B Switch QM/31/000/ Bracket Switches: TQM/31, QM/3, QM/13 Cylinder Ø A B Weight 3 4,5 38 0,06 kg 40 5,5 43 0,06 kg 50 4,5 48 0,06 kg 63 4,5 53 0,06 kg 80 1,5 61 0,08 kg 100 0,5 68 0,08 kg ,08 kg ,5 0,03 kg ,03 kg ,041 kg ,080 kg A 1 B 1 Bracket Switch QM/140/010/ Bracket with holding strap Pneumatic switch: QM/140 1 Cylinder Ø A Weight 3 31,5 0,00 kg 40 30,5 0,00 kg 50 31,5 0,00 kg 63 9,5 0,00 kg 80 30,5 0,00 kg ,0 0,00 kg A Bracket Switch N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, 3/07

15 Spares Cylinder Type Spare kit Comprising Piston rod Ø Item Description Quantity Item 1 3 A/803 QA/803/00 Piston rod seal 1 M/P19966/* 3 A/803/M QA/803/00 5 Cushion seal SM/P19966/* 40 A/8040, A/8040/M QA/8040/00 6 O -ring M/P19967/* 50 A/8050, A/8050/M QA/8050/00 10 Piston seal M/P19968/* 63 A/8063, A/8063/M QA/8063/00 11 Wear ring 1 M/P19969/* 80 A/8080, A/8080/M QA/8080/00 6 O -ring 1 M/P19970/* 100 A/8100, A/8100/M QA/8100/00 Ø 3 to 100 mm) M/P19971/* 15 A/815, A/815/M QA/817/00 M/P30988/* 160 A/8160, A/8160/M QA/8160/00 M/P30989/* 00 A/800, A/800/M QA/800/00 M/P30990/* 50 A/850, A/850/M QA/850/00 M/P19374/* 30 A/830, A/830/M QA/830/00 M/P1939/* * Insert stroke length Note: please quote the cylinder type number when ordering spares kits and piston rods! N/UK

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

LPRA/182000/M Double acting profile cylinders Ø mm

LPRA/182000/M Double acting profile cylinders Ø mm Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO

More information

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for

More information

Our policy is one of continued research and development. We therefore reserve the right

Our policy is one of continued research and development. We therefore reserve the right Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE

More information

Our policy is one of continued research and development. We therefore reserve the right to amend,

Our policy is one of continued research and development. We therefore reserve the right to amend, Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting > > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)

More information

PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting

PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard

More information

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting > > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance

More information

Strokes (mm) N/en

Strokes (mm) N/en IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated

More information

RM/57200/M, RT/57200/M

RM/57200/M, RT/57200/M Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

Available: Cylinders till july 2000 Spares till july /98 N

Available: Cylinders till july 2000 Spares till july /98 N Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line

More information

Our policy is one of continued research and development. We therefore reserve the right 1/98 N

Our policy is one of continued research and development. We therefore reserve the right 1/98 N ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information

Our policy is one of continued research and development. We therefore reserve the right 10/99 N

Our policy is one of continued research and development. We therefore reserve the right 10/99 N Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry

More information

PVA/182000, PVA/182000/M

PVA/182000, PVA/182000/M Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to

More information

LRM/55401/M, Roundline cylinder Magnetic piston, double acting

LRM/55401/M, Roundline cylinder Magnetic piston, double acting LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and

More information

ACT-72. DA/8000 Double acting Ø mm

ACT-72. DA/8000 Double acting Ø mm ISO/VDMA Cylinders DA/8000 Double acting Ø 32... 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:

More information

Guide blocks for ISO/VDMA cylinders

Guide blocks for ISO/VDMA cylinders Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection

More information

RM/900/M Heavy duty cylinders Ø 1 1/4... 4

RM/900/M Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting

PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting > ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification

More information

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm otary cylinders ack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 25 mm Suitable torques from,2 to 5,0 Nm/bar otation angles 90, 80, 270, 360 Adjustable cushioning Male and female

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

1/96 N Our policy is one of continued research and development. We therefore reserve the right

1/96 N Our policy is one of continued research and development. We therefore reserve the right Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide

More information

RM/28000/M Roundline cylinders (ISO)

RM/28000/M Roundline cylinders (ISO) RM/28000/M Roundline cylinders (ISO) Single acting, ISO 6432 - Ø 10... 25 mm Magnetic piston as standard enerally conforms to ISO 6432 High strength, double crimped end cap design Corrosion resistant Nose

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

PRA/801000, PRA/803000, RA/801000, RA/ ISOLine cylinder, single acting

PRA/801000, PRA/803000, RA/801000, RA/ ISOLine cylinder, single acting PR/80000, PR/80000, R/80000, R/80000 > ø 2... 00 mm > High performance adaptive cushioning system CS > High performance, stability and reliability Technical features Medium: Compressed air, filtered, lubricated

More information

M/146000, M/146100, M/146200

M/146000, M/146100, M/146200 LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / / Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

M/46900/IA, M/46900/M

M/46900/IA, M/46900/M TWIN-LINTR Rodless Cylinders Non-magnetic and Magnetic Piston Double acting Ø 25 and 4 mm Double stroke compared with conventional cylinders Design covered by patent Maximum stroke length from minimal

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

Associated ranges. Body material. Stainless steel Aluminium

Associated ranges. Body material. Stainless steel Aluminium Associated ranges Series Body material Stainless steel Aluminium KA/8000,.../M Stainless steel tie-rod cylinders (ISO/VDMA) Double acting Ø 32 to 200 mm 216 KM/8000/M Stainless steel roundline cylinders

More information

PRA/182000, PRA/182000/M ISO/VDMA Profile cylinders

PRA/182000, PRA/182000/M ISO/VDMA Profile cylinders P/182000, P/182000/M IO/VDM Profile cylinders onforms to IO 15552, IO 6431, VDM 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals

More information

M/46800/M, M/46800/HM, M/46800/PM

M/46800/M, M/46800/HM, M/46800/PM External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance

More information

Large Bore Extruded Cylinders, ISO 6431 Series 41

Large Bore Extruded Cylinders, ISO 6431 Series 41 Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting > > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed

More information

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect

More information

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

Standard cylinders DNG/DNGZS, ISO 15552

Standard cylinders DNG/DNGZS, ISO 15552 Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

Tie rods cylinders to ISO standard Ø

Tie rods cylinders to ISO standard Ø Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562

More information

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm > Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Profile Design Air Cylinder

Profile Design Air Cylinder Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous

More information

P1D-B Pneumatic Cylinders

P1D-B Pneumatic Cylinders P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series

More information

Twin Rod Non Rotate Cylinders RDV and AZ

Twin Rod Non Rotate Cylinders RDV and AZ Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double

More information

ACTUATORS equipment engineering advantage

ACTUATORS equipment engineering advantage www.norgren.com/rail RAILINE PNEUMATIC MOTION & FLUID CONTROL SOLUTIONS YOU CAN SEE OUR THINKING engineering advantage ACTUATORS valves pressure switches AND transducers air line equipment fittings tubing

More information

-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.

-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...

More information

CYLINDERS. Moving more than air

CYLINDERS. Moving more than air CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders

More information

Series 31 compact cylinders 1/

Series 31 compact cylinders 1/ Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides

More information

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets

More information

QA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm

QA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm Guide blocks with plain bearings/ roller bearings Ø 3 to mm Conorms to ISO 643, VDMA 46 and NFE 49 3 Ensures protection against external rotary and bending orces Guide rods run through bearings protected

More information

Series C95 ø32, ø40, ø50, ø63, ø80, ø100

Series C95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless

More information

ISO 6432 Ø mm. Page 9. Ø mm. RM/91000/M, RM/93000/M Ø mm. Ø mm ISO, VDMA, NFE. ISO, VDMA, NFE Ø 32...

ISO 6432 Ø mm. Page 9. Ø mm. RM/91000/M, RM/93000/M Ø mm. Ø mm ISO, VDMA, NFE. ISO, VDMA, NFE Ø 32... Actuators Product selector table...2 Single acting cylinders Miniature roundline cylinders ( 2,5 & 4 mm)...9 ISO Roundline ( 10 to 25 mm)...10 Roundline ( 8 to mm)...20 VDMA compact ( 20 to 63 mm)...32

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

Standard cylinders DNCB, ISO 15552

Standard cylinders DNCB, ISO 15552 Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction

More information

Cylinders DSBG to ISO 15552

Cylinders DSBG to ISO 15552 Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless

More information

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of

More information

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552 PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder

More information

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned

Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned > Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

bar -20 C C ( C for high temperature version) 1000 mm

bar -20 C C ( C for high temperature version) 1000 mm Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature

More information

Short-stroke cylinders ADVC/AEVC

Short-stroke cylinders ADVC/AEVC Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

TELESCOPIC CYLINDERS ø mm Series RT

TELESCOPIC CYLINDERS ø mm Series RT TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a

More information

ISO Cylinders - P1D-B

ISO Cylinders - P1D-B Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated

More information

Series CP95 ø32, ø40, ø50, ø63, ø80, ø100

Series CP95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type

More information