Stainless Steel Cylinders Acid and Corrosion Resistant
|
|
- Ashlyn Flynn
- 6 years ago
- Views:
Transcription
1 Stainless Steel Cylinders Acid and Corrosion Resistant Subject to change 133
2 Stainless Steel Cylinders Contents Stainless Steel Double-Acting Cylinders per ISO 6432 Bores 12 to 25 mm Type CRDSNU Stainless Steel Double-Acting Cylinders per ISO 6432, VDMA With Tie Rods for Mounting Proximity Sensors Bores 32 to 100 mm Type CRDNG Stainless Steel Double-Acting Cylinders per ISO 6432, VDMA With Tie Rods for Mounting Proximity Sensors and Integral Rear Swivel Bracket Bores 32 to 100 mm Type CRDNGS Stainless Steel Double-Acting Cylinders Bores 12 to 63 mm Type CRDG Stainless Steel Double-Acting Cylinders Bores 32 to 63 mm Type CRDSW Piston Rod Accessories Stainless Steel Cylinders These cylinders are designed for use in the chemical, electroplating and food processing industries. They are constructed of corrosion-resistant stainless steel, and seals are made of FPM. The corrosion-resistance of cylinder components has been verified by tests in: sulphur dioxide atmosphere (Kesternich test) sodium chloride mist spray water condensation cycle Type CRDSNU Type CRDNG Type CRDNGS Type CRDG Type CRDSW 134 Subject to change
3 Stainless Steel Cylinders Features New Corrosion Resistant Cylinders Bore Sizes 12 mm to 100 mm Type CRDSNU (piston Ø 12 to 25 mm) (ISO Standard) Type CRDG (piston Ø 12 to 63 mm) Type CRDSW (piston Ø 32 to 63 mm) Type CRDNG... and CRDNGS... (piston Ø 32 to 100 mm) (ISO Standard) Corrosion resistant magnetically actuated proximity sensor accessories Adjustable end position cushioning (with cover screw) Fittings and flow-control valves in corrosion-resistant steel Laser etched Type designation permanent and durable Versatile mounting options Cylinder Type CRDNGS-... with integral swivel flange Type CRDNG-... without swivel flange Additional Technical Features: Corrosion resistant materials for food, chemicals, pharmaceuticals industries Adjustable end position cushioning for long service life Subject to change 135
4 Stainless Steel Cylinders Accessories Selection Table Metric Series Port Flow Control Piston Rod Thread Piston Rod Accessories Cylinder Bore Size (mm) Cylinder Type CRDSNU Male Rod Clevis CRDG Type CRSG-... CRDSW CRDNG CRDNGS Page 161 Page , 16 M5 CRGRLA-M5-B M6 CRSG-M6 20 G1/8 CRGRLA-1/8-B M8 CRSG-M8 25, 32 G1/8 CRGRLA-1/8-B M10 x 1.25 CRSG-M10 x G1/4 CRGRLA-1/4-B M12 x 1.25 CRSG-M12 x G1/4 CRGRLA-1/4-B M16 x 1.5 CRSG-M16 x G3/8 CRGRLA-3/8-B M16 x 1.5 CRSG-M16 x G3/8 CRGRLA-3/8-B M20 x 1.5 CRSG-M20 x G1/2 CRGRLA-1/2-B M20 x 1.5 CRSG-M20 x 1.5 Mounting Accessories (See respective cylinder pages.) Proximity Switches Order Number CRSMEO-4-K-LED-24 See page 161. Sensor Mounting Brackets For cylinder Types CRDNSU, CRDG, CRDSW Order bracket, Type CRSMBR-... For cylinder Types CRDNG and CRDNGS Order bracket, Type CRSMB-... See page 161. Flow Controls Type CRGRLA See page 161. Fittings Types CRQS... and CRCN See Controls and Accessories catalog, Subject to change
5 Stainless Steel Cylinders, Type CRDSNU For Proximity Sensing Per DIN ISO 6432, Bores 12 to 25 mm Stainless Steel Cylinder with flexible cushion rings Type CRDSNU-...-P-A These pneumatic cylinders are acid and corrosion resistant. They are also free from materials that interfere with drying of paint or varnish. For accessories, see page 160. Rod Clevis Type CRSG-... A permanent magnet located on the cylinder actuates proximity sensors. Depending on the stroke, one or more proximity sensors can be mounted to the cylinder. The switches allow non-contact sensing of the end or intermediate positions of the cylinder. Acid and corrosion resistant magnetically actuated proximity sensors, see page 854. Mounting of basic cylinder Thread Mount Mounting with Hex Nut Pivot Mount front rear front rear rear Available mounting hardware Foot Mount (Short Strokes) Foot Mount Flange Mount Type CRHBN-...x1 (1 foot) Type CRHBN-...x2 (2 Feet) Type CRFBN front rear front rear Clevis Mount Type CRLBN Order Number Part No. + Type + Bore + Stroke + Cushioning + Sensing Example: Type CRDSNU, Bore 20 mm, Stroke 50 mm = CRDSNU P-A Medium Compressed air (filtered, lubricated or unlubricated) Design Piston cylinder, corrosion and acid resistant Max. Allowable Operating Pressure 150 psi / 10 bar Temperature Range -4 to 176 F / -20 to +80 C (Check working range of proximity switches) Materials Cylinder barrel and mounting components: X5CrNi 1810; Bearing, cover cap and piston rod: X6 CrNiMoTi 17122; Seals: FPM Bore Stroke Force at Return Force at Connection min. max. 90 psi / 6 bar* 90 psi / 6 bar* mm in / mm lbf / N lbf / N ISO to 8 / 10 to / / 38 M / / 87 M to 13 / 10 to / / 140 G1/8 ISO to 20 / 10 to / / 220 G1/8 ISO * Theoretical values. Subject to change (Ref. 1.5/20-1) (98) 137
6 Stainless Steel Cylinders, Type CRDSNU Dimensions Type CRDSNU- + = Plus stroke Bore AM BE CD D D2 D5 D6 EE ER f8 dia dia h9 dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / 16 M16 x / / / / / 13.3 M / / 16 M16 x / / / / / 17.3 M / / 20 M22 x / / / / / 21.3 G1/8 ISO 0.39 / / 22 M22 x / / / / / 26.5 G1/8 ISO 0.47 / 12 Bore EW KK KV KW L L1 L2 L3 L4 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / 12 M / / / / / / / / 12 M / / / / / / / / 16 M / / / / / / / / 16 M10 x / / / / / / / 21 Bore L5 L6 WH XC 2 mm in / mm in / mm in / mm in / mm mm / / / / / / / / / / / / / / / / (Ref. 1.5/20-2) (98) Subject to change
7 Stainless Steel Cylinders, Type CRDSNU Mounting Hardware Foot Mount Type CRHBN- x1 (1 Foot) Flange Mount Type CRFBN- (1 Flange) Clevis foot and pin Type CRLBN- (1 Clevis foot and pin) + = Plus stroke Bore AB AO AU D11 E3 FB G1 G2 G3 dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 32 Bore H1 H2 H5 NH R1 R2 SA TR TF mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 50 Bore UF US UR W XA XS ZF mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / Subject to change (Ref. 1.5/20-3) (98) 139
8 Stainless Steel Cylinders, Type CRDSNU Part Numbers Order Number Order Number Order Number Part Part Part No. Piston No. Piston No. Piston Type Dia. Stroke Cushioning Type Dia. Stroke Cushioning Type Dia. Stroke Cushioning CRDSNU P-A CRDSNU P-A CRDSNU P-A Mounting Hardware Mounting Hardware CRHBN - 12/16-X CRHBN - 20/25-X CRHBN - 12/16-X CRHBN - 20/25-X CRFBN - 12/ CRFBN - 20/ CRLBN - 12/ CRLBN - 20/ CRDSNU P-A Mounting Hardware CRHBN - 20/25-X CRHBN - 20/25-X CRFBN - 20/ CRLBN - 20/25 Weights Cylinder lb/kg Mounting Hardware lb/kg Bore Type CRDSNU-... Type CRHBN-... Type CRFBN-... Type CRLBN-... Basic Additional Weight per mm weight 3/8 in / 10 mm of stroke length X 5 CrNi X 5 Crni X 5 CrNi / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/20-4) (98) Subject to change
9 Stainless Steel Cylinders, Type CRDNG For Non-contact Sensing per DIN ISO 6431, VDMA 24562, Bores 32 to 100 mm Double Acting Cylinder with adjustable end cushioning at both ends Type CRDNG-...-PPV-A This cylinder series conforms to DIN ISO 6431, VDMA and NF E These pneumatic cylinders are acid and corrosion resistant. These cylinders are free of substances that could interfere with the drying of paint or varnish. Bearing and cover caps have thread provisions for mounting without additional hardware. Piston rod accessories: Rod Clevis Type CRSG (see page 160) A permanent magnet on the piston actuates proximity sensors to permit sensing of the end or intermediate position of the cylinder rod. Depending on the stroke, one or more proximity sensors can be clamped to the cylinder tie rods. For acid and corrosion resistant magnetically actuated proximity sensors see page 854. Direct Mounting of Cylinder Mounting at front Mounting at rear Mounting from beneath Installation with additional mounting hardware Flange Mount Pivot Pin Clevis Mount Type CRFNG Type CRZNG Type CRLNZG front rear front rear Order Number Part No. (see page 144) and Type Designation: Type + Bore + Stroke + Cushioning + Sensing Example: Bore 50 mm, Stroke 50 mm = CRDNG PPV-A Medium Compressed air (filtered, lubricated or unlubricated) Design Piston Cylinder with tie rods, corrosion and acid resistant Max. Allowable Operating Pressure 150 psi / 10 bar Temperature -4 to 176 F / 20 to +80 C (Consider working range of proximity sensors) Materials Bearing cap and cover cap: X5 CrNiMo 17222; Cylinder barrel: X5 CrNi 18 10; Piston rod: X6CrNiMoTi ; Tie rods: X5 CrNi 18 10; Seals: Polyurethane Cylinder Stroke Force at Return Force Connection Cushioning Bore Length 90 psi / 6 bar* 90 psi / 6 bar* length min.-max. mm in / mm lbf / N lbf / N in / mm to 78.7 / 10 to / / 415 G1/ / / / 633 G1/ / / / 990 G1/ / / / 1682 G3/ / / / 2720 G3/ / / / 4418 G1/ / 30 *Theoretical values Subject to change (Ref. 1.5/25-1) (98) 141
10 Stainless Steel Cylinders, Type CRDNG Dimensions Type CRDNG Internal hex head bolt with female threads (D7) Cover for adjustable end cushioning Threads in bearing cover and end cover for direct mounting + = plus stroke length Bore AM B D2 D4 D5 D6 D7 D8 E EE H3 dia e11 dia dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm Metric in / mm / / / 12 M / / 33.6 M / / 50 G 1/8 ISO 0.39 / / / / 16 M / / 41.6 M / / 55 G 1/4 ISO 0.39 / / / / 20 M / / 52.4 M / / 65 G 1/4 ISO 0.47 / / / / 20 M / / 65.4 M / / 75 G 3/8 ISO 0.47 / / / / 25 M / / 82.8 M / / 100 G 3/8 ISO 0.63 / / / / 25 M / / M / / 120 G 1/2 ISO 0.63 / 16 Bore J3 J4 KK L L2 L3 L4 L5 L6 L7 L8 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / 5.7 M10 X / / / / / / / / / / 6.5 M12 X / / / / / / / / / / 8.6 M16 X / / / / / / / / / / 12 M16 X / / / / / / / / / / 13 M20 X / / / / / / / / / / 14 M20 X / / / / / / / / 5 Bore L9 L10 L11 LE T1 VD WH ZB 2 3 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm mm mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/25-2) (98) Subject to change
11 Stainless Steel Cylinders, Type CRDNG Mounting Hardware Dimensions Flange Mount Type CRFNG- (1 flange and mounting screws) Pivot Pin Type CRZNG- (1 pivot pin and mounting screws) Clevis Mount Type CRLNZG- (2 clevis mounts) + = plus stroke Bore C2 C3 E FB G4 G5 H2 H3 dia H13 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 16 Bore H7 J6 L12 L13 R S7 T3 T4 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 28.5 Bore TD TF TL TM UF VD W ZF mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 205 Subject to change (Ref. 1.5/25-3) (98) 143
12 Stainless Steel Cylinders, Type CRDNG Order Numbers, Weights Order Number Order Number Order Number Part Type Bore Stroke End Part Type Bore Stroke End Part Type Bore Stroke End No. Position No. Position No. Position Cushioning Cushioning Cushioning CRDNG PPV-A CRDNG PPV-A CRDNG PPV-A Mounting Hardware Mounting Hardware Mounting Hardware CRFNG CRFNG CRFNG CRZNG CRZNG CRZNG CRLNZG CRLNZG - 40/ CRLNZG - 40/ CRDNG PPV-A CRDNG PPV-A CRDNG PPV-A Mounting Hardware Mounting Hardware Mounting Hardware CRFNG CRFNG CRFNG CRZNG CRZNG CRZNG CRLNZG - 63/ CRLNZG - 63/ CRLNZG Weight Cylinder lb / kg Mounting Hardware Type / Materials lb / kg Bore Type CRDNG- Additional weight per Type CRFNG- Type CRZNG- Type CRLNZG- Basic Weight 3/8 in / 10 mm mm of stroke length X 5 CrNi X 5 CrNiMoTi X 5 CrNi / / / / / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/25-4) (98) Subject to change
13 Stainless Steel Cylinders, Type CRDNGS For Non-contact Sensing per DIN ISO 6431, VDMA and NF E , Bores 32 to 100 mm Double Acting Cylinder with adjustable end cushioning at both ends and integral rear swivel bracket Type CRDNGS-...-PPV-A This cylinder series conforms to DIN ISO 6431, VDMA and NF E These pneumatic cylinders are acid and corrosion resistant. These cylinders are free of substance that could interfere with the drying of paint or varnish. Bearing and cover caps have thread provisions for mounting without additional hardware. A permanent magnet on the piston actuates proximity sensors to permit noncontact sensing of the end or intermediate position of the cylinder rod. Depending on the stroke, one or more proximity sensors can be clamped to the cylinder tie rods. For acid and corrosion resistance and magnetically operated proximity sensors see page 854. Installation with additional mounting hardware Piston rod accessories: Clevis Mount Type CRLNG Rod Clevis Type CRSG (see page 160) Order Number Part No. (see page 148) and Type Designation: CRDNGS + Bore + Stroke + Cushioning + Sensing Example: Bore 50 mm, Stroke 50 mm = CRDNGS PPV-A Medium Compressed air (filtered, lubricated or unlubricated) Design Piston Cylinder with tie rods, corrosion and acid resistant Max. Allowable Operating Pressure 150 psi / 10 bar Temperature -4 to 176 F / 20 to +80 C (Consider working range of proximity sensors) Materials Bearing cap and cover cap: X5 CrNiMo 17222; Cylinder barrel: X5 CrNi 18 10; Piston rod: X6CrNiMoTi ; Tie rods: X5 CrNi 18 10; Seals: Polyurethane Cylinder Stroke Force at Return Force Connection Cushioning Bore Length 90 psi / 6 bar* 90 psi / 6 bar* length min. - max. mm in / mm lbf / N lbf / N in / mm to 78.7 / 10 to / / 415 G1/ / / / 633 G1/ / / / 990 G1/ / / / 1682 G3/ / / / 2720 G3/ / / / 4418 G1/ / 30 *Theoretical values Subject to change (Ref. 1.5/26-1) (98) 145
14 Stainless Steel Cylinders, Type CRDNGS Dimensions Type CRDNGS Internal hex head bolt with female threads (D7) Cover for adjustable end cushioning Threads in head and end caps for direct mounting + = plus stroke Bore AM B CB CD D2 D4 D5 D6 D7 D8 dia dia e11 H14 dia dia dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / 12 M / / 33.6 M / / / / / / 16 M / / 41.6 M / / / / / / 20 M / / 52.4 M / / / / / / 20 M / / 65.4 M / / / / / / 25 M / / 82.8 M / / / / / / 25 M / / M / 10 Bore E EE H3 J3 J4 KK L L2 L3 L4 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / 50 G 1/8 ISO 0.39 / / / 5.7 M10 X / / / / / 55 G 1/4 ISO 0.39 / / / 6.5 M12 X / / / / / 65 G 1/4 ISO 0.47 / / / 8.6 M16 X / / / / / 75 G 3/8 ISO 0.47 / / / 12 M16 X / / / / / 100 G 3/8 ISO 0.63 / / / 13 M20 X / / / / / 120 G 1/2 ISO 0.63 / / / 14 M20 X / / / / 4 Bore L5 L6 L7 L8 L9 L10 L11 LE MR T1 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 18 Bore UB VD WH XD ZB 2 3 mm in / mm in / mm in / mm in / mm in / mm mm mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/26-2) (98) Subject to change
15 Stainless Steel Cylinders, Type CRDNGS Mounting Hardware Dimensions Clevis Mount, Type CRLNG- (1 clevis mount and mounting screws) 1 Installer must provide appropriate size corrosion-resistant pivot pin Bore AH CB CD G1 G2 G3 H6 K1 K2 R1 S5 dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 11 Subject to change (Ref. 1.5/26-3) (98) 147
16 Stainless Steel Cylinders, Type CRDNGS Order Numbers, Weights Order Number Order Number Order Number Part Type Bore Stroke End Position Part Type Bore Stroke End Position Part Type Bore Stroke End Position No. Cushioning; No. Cushioning; No. Cushioning; Sensing Sensing Sensing CRDNGS PPV-A CRDNGS PPV-A CRDNGS PPV-A Mounting Hardware Mounting Hardware Mounting Hardware CRLNG CRLNG CRLNG CRDNGS PPV-A CRDNGS PPV-A CRDNGS PPV-A Mounting Hardware Mounting Hardware Mounting Hardware CRLNG CRLNG CRLNG Weight Cylinder lb / kg Mounting Hardware Type / Materials lb / kg Bore Type CRDNGS- Type CRLNG- Additional weight per Basic 3/8 in / 10 mm mm Weight of stroke length X 6 CrNiMoTi / / / / / / / / / / / / (Ref. 1.5/26-4, 1.5/26-3) (98) Subject to change
17 Stainless Steel Cylinders, Type CRDG-... Proximity Sensing, Bores 12 to 63 mm Double-Acting Cylinder with flexible cushion rings Type CRDG-...-P-A These pneumatic cylinders are acid and corrosion resistant. They are also free from materials that interfere with the drying of paint or varnish. A permanent magnet located on the piston actuates proximity sensors. The sensors allow non-contact sensing at the end or intermediate positions of the cylinder. (Order sensors separately.) For acid and corrosion resistant magnetically actuated proximity sensors and mounting kits, see page 854. For accessories, see page 160. Mounting of basic cylinder bores 12 to 25 mm Thread Mount Mounting with Hex Nut front front Available mounting hardware Foot Mount (short strokes) Flange Mount Type CRHBN Type CRFBN Mounting of basic cylinder, bores 32 to 63 mm Thread Mount Mounting with Nut front front Rod Clevis Type CRSG-... Available mounting hardware Flange and Foot Mounts Type CRFV Clevis Mount Type CRSBS Mounting Bolt Type CRGBS Order Number Part No. + Type + Bore + Stroke + Cushioning + Sensing Example: Type CRDG, Bore 20 mm, Stroke 50 mm = CRDG P-A Medium Compressed air (filtered, lubricated or unlubricated) Design Piston cylinder, corrosion and acid resistant Max. Allowable Operating Pressure 150 psi / 10 bar Temperature Range -4 to +176 F / -20 to +80 C (Check working range of proximity switches) Materials Cylinder barrel and mounting components: X5 CrNi 1810; Bearing, cover cap and piston rod: X6 CrNiMoTi 17122; Seals: Polyurethane Bore Stroke Force at Return Force at Connection min. max. 90 psi / 6 bar* 90 psi / 6 bar* mm in / mm lbf / N lbf / N ISO to 8 / 10 to / / 38 M / / 87 M to 13 / 10 to / / 140 G 1/8 ISO to 20 / 10 to / / 220 G 1/8 ISO to 20 / 1 to / / 415 G 1/8 ISO / / 633 G 1/4 ISO / / 990 G 1/4 ISO / / 1682 G 3/8 ISO * Theoretical values. Subject to change (Ref. 1.5/31-1) (98) 149
18 Stainless Steel Cylinders, Type CRDG Dimensions Type CRDG to 25-P-A + = Plus stroke Bore AM BE D D2 D5 D6 EE KK KV dia dia h8 dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm / 16 M16 x / / / / 13.3 M6 M / / 16 M16 x / / / / 17.3 M6 M / / 20 M22 x / / / / 21.3 G1/8 ISO M / / 22 M22 x / / / / 26.5 G1/8 ISO M10 x / 32 Bore KW L1 L2 L4 L5 WH 2 4 mm in / mm in / mm in / mm in / mm in / mm in / mm mm mm / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/31-2) (98) Subject to change
19 Stainless Steel Cylinders, Type CRDG Dimensions Type CRDG to 63-P-A + = Plus stroke Bore A1 B1 B2 B3 D1 dia D2 h8 dia D3 D4 dia D5 h9 dia D6 dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / 12 M30 x / / / / / / / / / 16 M38 x / / / / / / / / / 20 M45 x / / / / / / / / / 20 M45 x / / / 65.8 Bore D7 E1 K1 L1 L2 L4 L5 W1 2 4 mm in / mm in / mm in / mm in / mm in / mm mm mm 32 M8 x 1 G1/8 ISO M10 x / / / / / M10 x 1 G1/4 ISO M12 x / / / / / M12 x 1.5 G1/4 ISO M16 x / / / / / M14 x 1.5 G3/8 ISO M16 x / / / / / Subject to change (Ref. 1.5/31-2) (98) 151
20 Stainless Steel Cylinders, Type CRDG Mounting Hardware Dimensions Foot Mount Type CRHBN-... (1 Foot) For bores 12 to 25 mm Flange Mount Type CRFBN-... (1 flange) Bore AB AO AU FB H1 H2 NH R1 dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 20 Bore TF TR UF UR US W XS mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/31-3) (98) Subject to change
21 Stainless Steel Cylinders, Type CRDG Mounting Hardware Flange and Foot Mount Type CRFV-... (1 Foot) For bores 32 to 63 mm Threaded Bolt Type CRGBS-... (2 Pieces) Clevis Mount Type CRSBS-... (with 2 pivot bolts) Bore B4 B5 C1 D7 D10 E3 F1 F2 G1 F7/f8 mm in / mm iin / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / 14 M8 x / / / / / / / / 20 M10 x / / / / / / / / 20 M12 x / / / / / / / / 20 M14 x / / / / / 34 Bore G2 G3 H1 H2 H3 H4 L2 L10 L13 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 10 Bore L15 L16 N1 N2 N3 R2 S1 3 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / 9 8 Subject to change (Ref ) (10.95) 153
22 Stainless Steel Cylinders, Type CRDG Order Numbers, Weights Order Number Order Number Order Number Part Part Part No. Piston No. Piston No. Piston Type Dia. Stroke Cushioning Type Dia. Stroke Cushioning Type Dia. Stroke Cushioning CRDG P-A CRDG P-A CRDG P-A Mounting Hardware Mounting Hardware Mounting Hardware CRHBN - 12/ CRHBN - 12/ CRHBN - 20/ CRFBN - 12/ CRFBN - 12/ CRFBN - 20/ CRDG P-A CRDG P-A CRDG P-A Mounting Hardware Mounting Hardware Mounting Hardware CRHBN - 20/ CRFV CRFV CRFBN - 20/ CRSBS CRSBS CRGBS CRGBS CRDG P-A CRDG P-A Mounting Hardware Mounting Hardware CRFV CRFV CRSBS CRSBS CRGBS CRGBS - 63 Weights Cylinder lb/kg Mounting Hardware lb/kg Bore Type CRDG-... Additional Weight Type Type Type Type Type Basic per 10 mm CRHBN-... CRFBN-... CRFV-... CRSBS-... CRGBS-... mm weight of stroke length X 5 CrNi X 5 CrNi X 5 CrNi X 5 CrNi X 5 CrNi / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5\31-4) (98) Subject to change
23 Stainless Steel Cylinders, Type CRDSW Proximity Sensing, Bores 32 to 63 mm Stainless Steel Cylinder with flexible cushion rings Type CRDSW-...-P-A These pneumatic cylinders are acid and corrosion resistant. They are also free from materials that interfere with the drying of paint or varnish. For accessories, see page 160. Rod Clevis Type CRSG-... A permanent magnet located on the piston actuates proximity sensors. Depending on the stroke, one or more proximity sensors can be mounted to the cylinder. The sensors allow non-contact sensing of the end or intermediate positions of the cylinder. Order sensors separately. Acid and corrosion resistant magnetically actuated proximity sensors, see page 854. Mounting of basic cylinder Thread Mount Mounting with Nut front rear front rear Available mounting hardware Foot Mount Type CRH Flange Mount Type CRFV Clevis Mount Type CRSBS front rear front rear Mouting Bolt Type CRGBS front rear Order Number Part No. + Type + Bore + Stroke + Cushioning + Sensing Example: Type CRDSW, Bore 32 mm, Stroke 50 mm = CRDSW P-A Medium Compressed air (filtered, lubricated or unlubricated) Design Piston cylinder, corrosion and acid resistant Max. Allowable Operating Pressure 150 psi / 10 bar Temperature Range -4 to +176 F / -20 to +80 C (Check working range of proximity switches) Materials Cylinder barrel: X5 CrNi 1810; Bearing, cover cap: X5 CrNiMoTi 17122; Piston Rod: X6 CrNiMoTi 17122; Seals: Polyurethane Bore Stroke Force at Return Force at Connection min. max. 90 psi / 6 bar* 90 psi / 6 bar* mm in / mm lbf / N lbf / N to 20 / 1 to / / 415 G 1/ / / 633 G 1/ / / 990 G 1/ / / 1682 G 3/8 * Theoretical values. Subject to change (Ref. 1.5/30-1) (98) 155
24 Stainless Steel Cylinders, Type CRDSW Dimensions Type CRDSW- + = Plus stroke Bore A1 B1 B2 B3 D1 D2 D3 D4 D5 dia f8 dia dia dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / 12 M30 x / / / / / / / / 16 M38 x / / / / / / / / 20 M45 x / / / / / / / / 20 M45 x / / 45 Bore D6 D7 E1 K1 L1 L2 L3 L4 L5 dia mm in / mm in / mm in / mm in / mm in / mm in / mm / 33.6 M8 x 1 G1/8 ISO M10 x / / / / / / 41.6 M10 x 1 G1/4 ISO M12 x / / / / / / 52.4 M12 x 1.5 G1/4 ISO M16 x / / / / / / 65.4 M14 x 1.5 G3/8 ISO M16 x / / / / / 35 Bore L6 L8 W1 mm in / mm in / mm in / mm mm / / / / / / / / / / / / (Ref. 1.5/30-2) (98) Subject to change
25 Stainless Steel Cylinders, Type CRDSW Mounting Hardware, Dimensions Foot Mount Type CRH- (2 feet and 1 nut) Flange Mount Type CRFV- (1 flange) + = Plus stroke Bore B3 B4 C1 H2 H3 H4 L10 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / 65 Bore L11 L12 L13 N1 N2 S1 mm in / mm in / mm in / mm in / mm in / mm in / mm / / / / / / / / / / / / / / / / / / / / / / / / 9 Subject to change (Ref. 1.5/30-3) (97/98) 157
26 Stainless Steel Cylinders, Type CRDSW Mounting Hardware Dimensions Mounting Bolt Type CRGBS- (2 pieces) Clevis Mount Type CRSBS- (with 2 pivot pins) + = Plus stroke Bore B5 D7 D10 E3 F1 F2 G1 G2 G3 f7/f8 dia mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm / 52.8 M8 x / / / / / / / / 63.8 M10 x / / / / / / / / 77.8 M12 x / / / / / / / / 93 M14 x / / / / / / / 65 Bore H1 L2 L14 L15 L16 N3 R2 S1 3 mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / (Ref. 1.5/30-3) (98) Subject to change
27 Stainless Steel Cylinders, Type CRDSW Order Numbers and Weights Order Number Order Number Order Number Part Part Part No. Piston No. Piston No. Piston Type Dia. Stroke Cushioning Type Dia. Stroke Cushioning Type Dia. Stroke Cushioning CRDSW P-A CRDSW P-A CRDSW P-A Mounting Hardware Mounting Hardware Mounting Hardware CRH CRH CRH CRFV CRFV CRFV CRSBS CRSBS CRSBS CRGBS CRGBS CRGBS CRDSW P-A Mounting Hardware CRH CRFV CRSBS CRGBS - 63 Weights Cylinder lb/kg Mounting Hardware lb/kg Bore Type CRDSW-... Type CRH-... Type CRFV-... Type CRSBS-... Type CRGBS-... Basic Additional Weight per mm weight 3/8 in / 10 mm stroke length X 5 CrNi X 5 CrNi X 5 CrNi X 5 CrNi / / / / / / / / / / / / / / / / / / / / Subject to change (Ref. 1.5/31-1) (98) 159
28 Stainless Steel Cylinders Rod Clevis Rod Clevis Corrosion- and acid-resistant design per DIN ISO 8140 or DIN (see table), for pivotal cylinder mount. Includes hex nut per DIN 430 and pin. Type CRSG-... Type CRSG-... A rod clevis is installed on the front end of a piston rod when using a clevis or pivot mount on the cylinder. Order Number Part Number Type For Piston Rod Threads KK Materials Weight lb/kg CRSG-M6* 1,2 M6 X12CR Ni S / CRSG-M8* 1,2 M / CRSG-M10 x 1.25* 1,2 M10 x / CRSG-M12 x 1.25* 1,2 M12 x / CRSG-M16 x 1.5* 1,2 M16 x / CRSG-M20 x 1.5* 1 M20 x / Dimensions A in / mm B1 in / mm B2 in / mm B3 in / mm B4 in / mm CE in / mm 0.47 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 80 CK CM D1 ER LE in / mm in / mm in / mm in / mm in / mm mm 0.24 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * 1 DIN ISO 8140 * 2 DIN (Ref. 1.5/50-1) (98) Subject to change
29 Stainless Steel Cylinders Flow Controls and Sensor Accessories Exhaust Flow Control Valve With Swivel Connector Corrosion and acid-resistant design Type CRGRLA-...-B For complete specifications, see page 839. Order Number Part No./ Type CRGRLA-M5-B CRGRLA-1/8-B CRGRLA-1/4-B CRGRLA-3/8-B CRGRLA-1/2-B Design Needle valve with check valve and rotatable body Connection M5 G 1/8 G 1/4 G 3/8 G 1/2 Orifice Size (in / mm) 0.08 / / / / / 10.6 Standard Nominal Controlled Flow Cv / 0 to / 0 to 0.34 / 0 to 0.61 / 0 to / 0 to 2.1 / Rate (Cv / l/min) l/min 0 to 95 0 to to to to 2100 Materials Housing: X 5 CrNiMoNb 18 10; Hollow bolt, adjusting screw: X 6 CrNiMoTi ; Seals: NBR, FPM, PVC Electrical Proximity Sensor with yellow LED and protective circuit Type CRSMEO-4-K-LED-24 Type CRSMEO-4-K-LED-24 Order Number CRSMEO-4-K-LED-24 Type CRSMBR-... Sensor Mounting Brackets Type CRSMBR-... For cylinders Type CRDSNU, CRDG and CRDSW Type CRSMB-... For cylinders Type CRDNG and CRDNGS Type CRSMB-... Order Number For Bore Size Part No. Type (mm) CRSMBR CRSMBR CRSMBR CRSMBR CRSMBR CRSMBR CRSMBR CRSMBR Order Number For Bore Size Part No. Type (mm) CRSMB CRSMB CRSMB CRSMB CRSMB CRSMB Subject to change (Ref. 4.2/15-1, 3.2/15-2) (98) 161
30 NOTES 162
Stainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/...
More informationStainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/12 Subject to change Internet: www.festo.com/catalogue/...
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationCorrosion resistant cylinders - Inch Series
Corrosion resistant cylinders - Inch Series Corrosion-resistant in aggressive environmental conditions Easy to clean design Wide choice of variants Comprehensive range of accessories Product range overview
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationStrokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
More informationTie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationOur policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationCompact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
More informationStainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationOur policy is one of continued research and development. We therefore reserve the right 10/99 N
Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry
More informationSeries 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More informationRound Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
More informationMulti-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationDIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationVERSION 1 / Basic cylinder R Through rod. VERSION 2 D Double acting Y Single acting rear spring* S Single acting front spring
Stainless steel round cylinders with techno-polymer end caps (to ISO 6432 standard for Ø 6 25) DESCRIPTION Cylinders series UP are born as technological efficient reply to the always new needs of different
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationAvailable: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
More informationRA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
More informationOur policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories
More informationStandard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More information1/96 N Our policy is one of continued research and development. We therefore reserve the right
Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationShort-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationRM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
More informationWST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationPVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
More informationLRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
More informationSlim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space
Non-Rotating Elliptical Piston Cylinders, Type DZH Features and Benefits Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space Patented elliptical piston/seal
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationStrokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationCartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
More informationbar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
More informationPRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
More informationTandem/high-force cylinders
Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationSeries C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
More informationSTANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
More informationSeries QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
More informationCompact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
More informationP1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
More information