ISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8.
|
|
- Tracey Robertson
- 5 years ago
- Views:
Transcription
1 MCMI series ISO- MINITURE CYLINDER/NON-PIVOT TYPE MINITURE CYLINDER Table for standard stroke Single acting Double acting ø,,0,7,00 Tightening torque Order example Stroke (mm) ø0,,,0,7,00,,0 ø,0 0,,0,0,0,00 ø 0,,0,0,0,00,,0,00 ø,0,,,0,7,00,,0,00,0, 00,0,00,0,00 * Stroke out of specification is also available. * Please consult us if stroke out of specification. Tube I.D. Rod thread Tightening torque (kgf cm) Tube I.D. Rod thread Tightening torque (kgf cm) ø M 0.. ø M.0 ø0 M 0.. ø0 M. 70 ø M.0 ø M0. 0 * Make sure the tightening torque of rod thread does not exceed the value above. * The tolerance of tightening torque is ±%. MCMI 00 N Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised stainless steel cylinder tubes offer a high resistance to corrosion and low internal friction. Cylinder mountings vailable with a comprehensive range of accessories for rigid or flexible mounting. ISO- standard Enables world-wide inter-changeability. Port thread Rc. NPT. are also available Magnetic as standard Specification Model MCMI (mm) 0 0 Port size M 0. / Medium Max. operating perssure ir 0.7 MPa Min. operating perssure(mpa) Proof pressure Lubricator mbient temperature vailable speed range Max. allowable kinetic energy (J) Sensor switch (*) MPa Not required -~+0 C (No freezing) 0~00 mm/sec Cushion pad Cushion air RCM Sensor switch (band) BM BM0 BM BM BM0 BM * RCM specification, please refer to page -. Mounting accessories LB MCMI MODEL STYLE : Single rod : Double rod TUBE I.D. Symbol Description Double acting / Male thread Blank: Standard STROKE N: Non-pivot type (end-plain) Blank: Cushion pad (Unadjustable) : Cushion air (djustable) (*) * ø~ not applicable. Single acting / Normally extended male thread Single acting / Normally returned male thread Double rod / Male thread 7 Double rod / djustable male thread Please mark "adjustable distance(mm)" at order list * Single acting type, please consult us. * Order example for special specification, refer to page 0-7. MODEL MOUNTIN TYPE LB F FB SDB Y I YS (Y+Floating pin) TUBE I.D. * Y, I, YS, please refer to page -.
2 MCMI Inside structure & Parts list Cushion pad ISO- MINITURE CYLINDER ø, ø 0 ø0 0 N type: ø~ø ø, ø type: ø ø Material No. Part name 0 0 Rod cover luminum alloy Head cover luminum alloy Tube Stainless steel Piston rod Stainless steel * Piston-R luminum alloy * Piston-H luminum alloy * 7 Piston gasket NBR Piston packing NBR * * Magnet ring Magnet material 0 Wear ring Teflon+raphite Washer * Piston bolt SCM Cover ring NBR Cushion gasket NBR Rod bush Bearing alloy Rod packing NBR 7 Snap ring Spring steel Washer Carbon steel Tie nut Carbon steel 0 Rod front nut Carbon steel Port plug Plastic * Style is not applicable in cylinder bore ø~ø. * Repair kit is not applicable for cylinder bore ø~ø. Q'y Component parts (inclusion) Repair kits (inclusion) type type type type *. Polyurethane *. Carbon steel *. Cylinder bore ø~ (Required quantity: psc) Order example Component parts / Repair kits Tube Component I.D. parts Repair kits ø CP-MCMI- PS-MCMI- ø0 CP-MCMI-0 PS-MCMI-0 ø CP-MCMI- PS-MCMI- ø CP-MCMI- PS-MCMI- ø0 CP-MCMI-0 PS-MCMI-0 ø CP-MCMI- PS-MCMI- Non-pivot type (end-plain) Tube I.D. ø ø0 ø ø ø0 ø Component parts CP-MCMI--N CP-MCMI-0-N CP-MCMI--N CP-MCMI--N CP-MCMI-0-N CP-MCMI--N
3 MCMI Inside structure & Parts list Cushion air ISO- MINITURE CYLINDER N type: ø~ø Material No. Part name * Cylinder bore ø~ is not applicable. 0 Rod cover luminum alloy Head cover luminum alloy Tube Stainless steel Piston rod * Carbon steel Piston-R luminum alloy Piston-H luminum alloy 7 Piston gasket NBR Piston packing NBR Magnet ring Magnet material 0 Wear ring Teflon+raphite Piston bolt SCM Cover ring NBR Cushion packing NBR Rod bush Bearing alloy Rod packing NBR Snap ring Spring steel 7 Washer Carbon steel Tie nut Carbon steel Rod front nut Carbon steel 0 Port plug Plastic Needle valve Stainless steel Needle valve packing NBR Steel ball Stainless steel *. Stainless steel Q'y Component parts (inclusion) Repair kits (inclusion) type type type type Order example Component parts / Repair kits Tube Component I.D. parts Repair kits ø CP-MCMI- PS-MCMI- ø0 CP-MCMI-0 PS-MCMI-0 ø CP-MCMI- PS-MCMI- Non-pivot type (end-plain) Tube I.D. ø ø0 ø Component parts CP-MCMI--N CP-MCMI-0-N CP-MCMI--N
4 MCMI ccessories ISO- MINITURE CYLINDER 7 0 No. ccessories Page Mounting accessories LB - Mounting accessories F/FB -, Mounting accessories SDB+PIN -, ccessories Y+PIN - ccessories YS (Y+Floating pin) - ccessories I+PIN - 7 Floating joint MFC - Floating joint MFCS - No. ccessories Page Female rod ends PHS - 0 Locking unit MCBMI - Sensor switch RCM+BM** - Fitting PC - (Vol.) Fitting JSC - (Vol.) Twin-guide cylinders MTB/TK/TU -
5 MCMI Dimensions Double acting ø~ø ISO- MINITURE CYLINDER B B ød RH -P N øcd H ø~ø øe ø~ø øe ønd h EH H K H+Stroke K L XF EW d EF EW d XC+Stroke ZC+Stroke K H+Stroke K +Stroke ZM+ Stroke ZN+ Stroke 7 C+djust stroke D R K øf S ZP+ Stroke WH+Stroke +adjust stroke ZQ+ Stroke+adjust stroke C D F H K R S B B CD D E EF EH EW H K K L LL. 7.7 M M M M M M M.. M M0. 7 N ND P RH WH XC XF ZC ZM ZN ZP ZQ M. M M. M 0. 7 M. M M. M M. / M. /
6 MCMI Installation of sensor switch ø~ø ISO- MINITURE CYLINDER Sensor switch: RCM Sensor switch band: BM** D C E B B C D E
7 MCMI Dimensions Single acting ø~ø ISO- MINITURE CYLINDER B H ød B RH P (*) P N øcd H øe (*)(+Stroke) K H+Stroke XC+Stroke (*)(XC+ Stroke) ZC+Stroke (*)(ZC+ Stroke) K L XF EW *. type ø without this air port. *. ( ) Dimension for type. H B B CD D E EW K K L L N P RH XF ZM ZN ZP ZQ M M. M M. M. / M0. 7 M. / 7.. MCMI- Stroke ~0 H ~00 0~0 ~0 LL ~00 0~0 ~0 XC ~00 0~0 ~0 ZC ~00 0~ MCMI- Stroke ~0 H ~00 0~0 ~0 LL ~00 0~0 ~0 XC ~00 0~0 ~0 ZC ~00 0~ Mounting accessories Double acting ø, ø F/FB FB FE FF FP FT W ZC ZF M M M M M M FB FP FF ø, ø0, ø0, ø FE FE W FT ZF+Stroke ZC+Stroke FT -øfb FP FF
8 MCMI Mounting accessories Double acting ø~ø ISO- MINITURE CYLINDER SDB XC+Stroke C øcd H CT CH CC CE -øcb Q N C CB CC CD CE CH CT N Q XC.. 0. M M M M M M LB ZC+Stroke CT CH CX JS CW øcb H (hole) CQ SW CL SX SC+Stroke S+Stroke SB+Stroke CB CH CL CQ CT CW CX S SB SC SW SX ZC.. M M M M M M
9 MCMI Dimensions Double acting ø~ø ISO- MINITURE CYLINDER N B H ød B RH -P ø~ø ø~ø øe K H+Stroke K XC+Stroke H B B D E H K K LL P RH XC. 7.7 M 0.7 M. M M 0.7 M. M M.0 0 M. M M M. M M. M. / M0. 7 M. / F ø, ø FB FE FF FP FT W XC FB H FP JS FF ø, ø0, ø0, ø FE FE W FT XC+Stroke -øfb H FP JS FF
Specification. Tube I.D Port size M5 0.8 Rc1/8. Medium. Proof pressure. Available speed range. Ambient temperature
MM series MINITURE YLINDER Features Non lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a
More informationSpecification. Model. Tube I.D. (mm) 32,40,50,63,80,100. Medium. Proof pressure. Ambient temperature. Available speed range.
MCQI2 series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to
More informationFeatures. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
More informationSpecification. Model MCQV2 MCQV. Tube I.D. (mm) 32,40 50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range
MQV / MQV2 series ISO-VDM STNDRD YLINDR Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes
More informationSpecification. Tube I.D Port size Rc1/8 Rc1/4. Medium. Ambient temperature. Lubricator
series MIITURE YLIDER eatures on lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a high resistance
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.
series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500
More informationKing Of Valve Co.,Ltd.
Series variation Series Series Series variation SCP* SCP* U Variation Double acting lubrication type Double acting oil-free type, with switch Double acting Stroke adjustable type (Extended) Double acting
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationL INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES
1-45 A IR CYLINDER BORE SIZES: Ø8, 10, 12, 16, 20, 25 Conforms to CETOP RP52P and ISO 6432 standards Double or single acting models High speed actuation Auto switch sensing optional Special shaped rod
More informationSeries CP95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series CP ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 6431, VDMA 2462, CETOP RP43P. CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP C C2 CA1 CS1 1.-1 Series CP Model Selection Execution Standard Type
More informationFeatures. Specification. Model. Tube I.D. (mm) Port size G1/8 G1/8 G1/4 G3/8. Medium. Ambient temperature.
series TIN-UID CYLINDR eatures The guide units can be assembled to cylinders that then conform to ISO6432. nti rotation guaranteed by use of external guide rods. our self lube bushes or linear bearings
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationBore size: JSC3: φ40/φ50/φ63/φ80/φ100. JSC4: φ125/φ140/φ160/φ180
764 Min. stroke length with switch ( switch) Brake cylinder: Double acting, single rod/double acting, no-lubrication -N Series : JSC3: φ40/φ50/φ63/φ80/φ100 JSC4: φ125/φ140/φ160/φ180 JIS symbol Specifications
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationDN series - Standard cylinder
series - cylinder Double piston packing type series ISO-431 specification series Provide CAD external dimension. DMB DU K Rod Locking his product : E End lock Use for longer stroke request DCK2 DCQ Pin
More informationStainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
More informationLarge bore size cylinder SCS2 Series
Large bore size cylinder C2 eries ew product LGE BOE IZE CYLIDE C2 EIE Large Mass eduction! 50% mass reduction by using aluminum for covers and tubes CC-1118 2 oh compliant Large Mass 50% mass reduction
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.
MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationSeries RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationFeatures. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)
Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationFeatures. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment
Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationCAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP
CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types
More information6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125
Symbol Features Ideal for clamping, press-in and under short stroke condition. Can be installed even in a narrow space with a shorter length in axial thrust direction. Easy installation only with bolts.
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationMedium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More information/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
More informationCompact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
More informationP1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
More informationSpecification. Medium. Proof pressure. Ambient temperature. Lubrication. Cushion. Sensor switch (*) RCA for ø50 RCB, RCE, RCE1, RDEP
MSB* series Specification Medium Model Operating pressure range Proof pressure Ambient temperature Lubrication Cushion MSB* Air.2~1 MPa 1.5 MPa -5~+6 C (No freezing) Not required With rubber cushion pad
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationCompact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.
Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common
More informationSeries AXR. Direct Mounting Cylinder/Double Acting Single Rod. Bore size(mm) : ф20, ф25, ф32, ф40. How to Order A - 98
Direct Cylinder/Double Acting Single Rod Bore size(mm) : ф2, ф25, ф32, ф4 AXRA Type STAINLESS STEEL BODY HIGH CYCLE LIFE LOW BREAKAWAY MAGNET STANDARD FOR AUTO SWITCH BUMPERS STANDARD DESIGNED FOR NON-LUBRICATED
More informationSeries CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
More informationProduct series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders
The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationAir Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
More informationLube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm
ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot
More information1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
More informationSeries C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationbar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
More informationSeries MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series.22- CL MLG CN CNG MNB CNS CLS CB CV/MVG CXW CXS CXT MX MXU MXH MXS MXQ MXF MXW MXP MG MGQ MGG MGC MGF
More information1/96 N Our policy is one of continued research and development. We therefore reserve the right
Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationC85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40
ISO Cylinder (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 Series: ø32, ø40 RoS Part numbers set for actuators with mounting brackets, rod end brackets and auto switches available. Now it is not necessary
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationAir Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.
ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side
More informationCAT.DKI A. SMC guide to ATEX compliant products
CT.DKI-08- SMC guide to TEX compliant products SMC - provide products compliant to TEX Directive Outline of TEX directive Since st July 00, equipment used in potentially explosive atmospheres within the
More informationACS2 series. KCC Co., Ltd. PNEUMATIC & HYDRAULIC. ACS2 series. For more info visit us : ACS2 - N LB 32 - S 100
KCC Co., Ltd. Symbol Features With auto switch, rubber bumper (Standard). improves lateral load resistance. Double Acting / Single Rod Double Acting / Double Rod Single Acting / Spring Return Single Acting
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationCAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125
M..3 : PM Page i CT.ES-8 F ir Cylinder ø newly introduced Series M ø,ø,ø,ø,ø,ø,ø Series M, MW, MK, Double acting single rod Double acting double rod Double acting non-rotating rod ø newly introduced (Double
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationSeries MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port
Parallel Type ir Gripper How to Order 1 1 2 Bore size mm 1mm 1mm 2mm mm MHZJ2 1 D F9PV Number of fingers 2 2 fingers D S C ction Double acting Single acting (normally open) Single acting (normally closed)
More informationSeries MBB ø32, ø40, ø50, ø63, ø80, ø100
Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis
More informationAZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.
Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationSeries C85. ISO Cylinder. Conforming to ISO 6432 and CETOP RP52P. ø8, ø10, ø12, ø16, ø20, ø25
ISO Cylinder Series C ø, ø0, ø, ø, ø, ø Conforming to ISO and CETOP RPP. Series Variations Standard Series C Series Non-rotating rod Series C ction Double acting Single acting Double acting Rod Single
More informationISO15552 Cylinders ø32, ø40, ø50, ø63, ø80, ø100, ø125
ISO2 Cylinders ø, ø, ø, ø, ø, ø0, ø CNOMO and circular grooves are on all four sides. Switch can be slid in. Reduced weight due a change in the configuration of the cover Small sized D-M au switch mountable
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationCompact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting
Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both
More informationBalancing Unit BBS Series
Lightly supporting heavy objects just with air Balancing Unit BBS Series Balancing Unit BBS Series CC-960A Move objects weighing up to 200 kg effortlessly! Balancing Unit BBS-A
More informationHygienic Design Cylinder
CT.EUS- -UK Hygienic Design Cylinder New Round type Series HY has been added. water resistant cylinder configured for easy cleaning ISO standard type Series HYC asic type Series HYQ With guide Series HYG
More informationAir Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.
ir Cylinder Series ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS emale rod end available as standard Rod end types suitable for the application can be selected. emale thread Easy fine adjustment of auto
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationAir Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page.
ir Cylinder: With End ock Series C ø, ø, ø, ø, ø Without auto switch With auto switch F G C D T With auto switch Mounting style asic style xial foot style Rod side flange style Head side flange style Single
More information2 way basic mounting: Through-hole or both ends tapped
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
More informationAir Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.
ir Cylinder ø 20, ø 25, ø 32, ø 40 New RoS Female rod end available as standard Selectable Rod end styles suitable for the application can be selected. Female thread Male thread Easy fine adjustment of
More informationHigh Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector
Non-rotating Type High Precision Scale Cylinder Series CEP1 ø12, ø How to Order CEP1 12 0 F9N L F High precision scale cylinder Mounting bracket Direct mounting front tapped type Foot type Front flange
More information1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1
1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston
More information22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.
Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationV160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
More informationCompact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.
Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series
More information