Series HB Solid Brass Cylinders

Size: px

Start display at page:

Download "Series HB Solid Brass Cylinders"

Laurence Walsh
6 years ago
Views:

Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless

1 Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity switches. Pressure energized wear compensating cup type piston seals on all models and bore sizes with one exception: bore oversize piston rod model has an O ring piston seal. Solid brass heads and caps are precision machined. Threaded construction provides a clean and compact exterior. Brass piston is silver brazed to the rod for an almost indestructible joint. Tube is heavy wall brass honed to insure proper size, roundness, and finish for maximun cylinder life.,, /8 Bore Cylinders have four lobed rod seal., Bore Cylinders have cup type rod seal. A natural choice where moisture is a problem. A U R O R A A I R P R O U C T S 6

AITIONAL SIGN FATURS SHOCK PAS Reduce noise and fatigue problems such as rod breakage with energy absorbing shock pads. Add / to the cylinder length for each pad. For pneumatic use only to 80 F.

Polyurethane or Viton wipers are wear compensating and effectively prevent damaging contaminants from entering the critical rod seal/rod bushing area. Limited availability.

Viton seals and wipers may be ordered for temperatures ranging from 0 to +00 F and for added chemical resistance.

Fluid compatibility is identical to buna n seals and their effective temperature range is +0 - +00 F. Long life rod seals are standard on all,, /8 bore cylinders.

2 AITIONAL SIGN FATURS SHOCK PAS Reduce noise and fatigue problems such as rod breakage with energy absorbing shock pads. Add / to the cylinder length for each pad. For pneumatic use only to 80 F. RO WIPRS Prolong the life of cylinders operating in dirty environments by adding rod wipers. Polyurethane or Viton wipers are wear compensating and effectively prevent damaging contaminants from entering the critical rod seal/rod bushing area. Limited availability. SAL COMPOUNS Standard cylinders contain buna n (nitrile) seals and polyurethane wipers which are compatible with most lubricants and fluids, and can withstand temperatures from 0 to +00 F. Viton seals and wipers may be ordered for temperatures ranging from 0 to +00 F and for added chemical resistance. Long Life seals will provide significantly increased service life due to their excellent abrasion resistance. Fluid compatibility is identical to buna n seals and their effective temperature range is F. Long life rod seals are standard on all,, /8 bore cylinders. HYRAULIC SALS Rod seal weepage can be substantially reduced by specifying polypak rod seals. They are available on all and bore cylinders. For availability on other bore sizes consult factory. HAR CHROM PISTON RO The standard rod in all HB cylinders is ground and polished type 0 stainless steel. Hard chrome plated steel rods are available. The plating gives the rod a very hard scratch resistant surface which increases the wear life of the rod, rod bushing, and rod seal. The result is increased cycle life on all cylinders and improved sealability on hydraulic cylinders. PISTON RO THRAS Rods are stocked with both fine and coarse male threads as listed in the ordering procedure. Almost any special thread female, metric, etc. can be produced to customer requirements in just a day or so for a modest extra charge. Female thread depth: #0, /, 5/6, /8 threads are 5/8 deep. /, 5/8, threads are / deep. Threads smaller than the nominal rod diameter will be per the photo unless otherwise noted. PIVOT BUSHING All HB caps have a stainless steel pivot bushing. STOP TUB Stop tubes are spacers between the piston and the cylinder head which prevent the piston from fully extending. This will reduce the bearing loads by increasing the distance between bearing points. Stop tubes should be used on long stroke cylinders and on cylinders where side load is a concern. See ordering procedure for available lengths. Also consider SMA aluminum cylinders for long strokes and side load conditions. AJUSTABL CUSHIONS Reduce noise and decelerate the piston at the end of stroke. Aurora s cup type cushion seal provides positive cushioning yet allows a high flow rate when reversing for minimum cycle time. A stainless steel metering screw offers simple adjustment of the cushion rate. The adjusting screw is fully recessed and self locking on and bore cylinders. The adjusting screw on /8 bore cylinders is locked in place by a low profile nut. SHOCK PAS RO WIPRS FMAL RO THRAS PR CATALOG UNLSS SPCIFI SPCIAL IAMTR MAL THRAS PR CATALOG UNLSS SPCIFI / PIVOT BUSHING Series HB BRASS Polypak is a registered trademark of Parker Hannifin 6

3 BOR HB BRASS 00 PSI MAX. AIR 500 PSI MAX. HY. Non shock HB /8 + STROK /8 FLATS OUBL ACTING / C PILOT x /6 INICATS CUSHION SCRW LOCATION AN AVAILABILITY. / + STROK /8 OUBL ACTING / Single Acting Cylinders Pneumatic only Adds to cylinder length Add to Add to TYP STROK cyl. O.A.L. STROK cyl. O.A.L. Spring return 0- /8 - Spring extend 0- /8 - Spring Force: Spring fully extended approx. 0# Spring fully compressed approx. 5# Wrench Flats Optional / 5 A RO A B 5/8.500 /8.65 /8 B HB I.9 STAINLSS BUSHING INICATS CUSHION SCRW LOCATION AN AVAILABILITY. /8 / + STROK OUBL ACTING C PILOT x /6 / /- Nut Nose Mounting Nut Not included with Cylinder Order separately /8 /.5.9 HB9.505 I.505 STAINLSS BUSH. INICATS CUSHION SCRW LOCATION AN AVAILABILITY. / + STROK OUBL ACTING / C PILOT x /6 Thread / HB-65 5/8-8 Thread HB-50-6 Thread Rod Clevis and Nut / / HB / -. PILOT. x /6 C PILOT x /6 INICATS CUSHION SCRW LOCATION AN AVAILABILITY. SQUAR.50 / / + STROK OUBL ACTING / HB-60 Clevis Pin Assembly Used on HB-65, 50 6 HB 5/8 Standard Oversize / -. PILOT. x /6 / / C PILOT x /6 INICATS CUSHION SCRW LOCATION AN AVAILABILITY. C PILOT COMBINATIONS./../. Part No. Cushions not available on cylinders with diameter rod.

4 TM All Aurora products available for hour delivery HB Options Shock Pads Wrench Flats Rod Wiper Viton or Long Life Seals Polypak Rod Seal Chrome Rod Magnetic Piston Stop Tube Adjustable Cushions HB-60 Flange Bracket Order /- nut separately /8 /8 /8 /8 /8 / + STROK OUBL ACTING INICATS CUSHION SCRW LOCATION AN AVAILABILITY. / + STR / + STR BL ACTING / C PILOT x /6 /8 /8 FLATS FLATS C PILOT INICATS CUSHION SCRW LOCATION AN AVAILABILITY. / C PILOT HB5 HB6.8 HB-80 Foot Bracket Order /- nut separately /8 R. /8 /8 /.80 / HOLS /6 / HOLS / / + STROK BL ACTING /8 /8 + STR BL ACTING /8 C PILOT x /6 /8 /8 /8 / TYP..50 TYP..99 / TYP. HB HB-00 Clevis Bracket Used on HB, 9 / R. / HOLS PR PART / / /6.50 5/8 /8 HB-00T Trunnion Bracket Used on HB, 8, 9 / R. / HOLS PR PART.50 /6 5/8 / /8 / / / 5/8 Standard Oversize / + STR C PILOT x /6 /8 / / /8 + STR BL ACTING C PILOT x /6 /8 /8 C PILOT COMBINATIONS./../. / TYP TYP. HB8 / TYP. HB9 Part No. Series HB BRASS

5 BOR HB BRASS 00 PSI MAX. AIR 00 PSI MAX. HY. Non shock HB0 /8 FLATS /6 + STR BL ACTING 9/6 /6 INICATS CUSHION SCRW LOCATION AN AVAILABILITY. /6 + STR BL ACTING /6 9/6 /6 /6 C PILOT / TYP..000 TYP. / SQ 9/ RILL, 6 HOLS Single Acting Cylinders Pneumatic only Adds to cylinder length Add to Add to TYP STROK cyl. O.A.L. STROK cyl. O.A.L. Spring return 0- /8 - Spring extend 0- /8 - Spring Force: Spring fully extended approx. 0# Spring fully compressed approx. 5# Wrench Flats Optional / 5 A.000 B.000 RO A B 5/8.500 /8.65 /8 HB.000 C PILOT /6 x /6 INICATS CUSHION SCRW LOCATION AN AVAILABILITY..000 /8 /6 + STR BL ACTING 9/6 /6 /6 / SQ 9/ RILL, 6 HOLS HB-65 5/8-8 Thread HB-50-6 Thread Rod Clevis and Nut /.000 /.000 SQUAR / HB / SQ 9/ RILL, HOLS /6 INICATS CUSHION SCRW LOCATION AN AVAILABILITY..000 /8 / + STROK OUBL ACTING C PILOT x /6 / HB-60 Clevis Pin Assembly Used on HB-65, HB HB / SQ 9/ RILL, 6 HOLS.000 / SQ 5/8 Standard Oversize INICATS CUSHION SCRW LOCATION AN AVAILABILITY. /6 + STR 9/6 /6 /8 + STROK OUBL ACTING B NOS THRA C PILOT x /6 9/6 /6 /6 A RO C PILOT C PILOT /6 x /6 9/ RILL, HOLS INICATS CUSHION SCRW LOCATION AN AVAILABILITY. / / C PILOT COMBINATIONS./../. Part No. Problem: Side Load Solution: Series SMA with Wear Strip Piston and Teflon Rod Bushing

6 ORRING PROCUR HB Brass Select code numbers/letters (bold type) from each of the six boxes below - then select any options desired from the opposite page. List codes in the same sequence as shown. The cylinder part number is an alpha numeric code. Bore Type Single Acting Spring return Single Acting Spring extend ouble acting Adds to cyl. length If double rod end model (HB6, 9,) is to be single acting, select A A B C Bore size /8 Piston Rod iameter / Nose Mount Combinations Rod dia. Mounting Style of Cylinder Head Pilot dia. / 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 5/6 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 5/6 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 /8 5/8-8 Nose Mount / Sq. Mount.68/.68 /8-6 Nose Mount / Sq. Head Mount.5/. 5/6 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 /8 5/8-8 Nose Mount / Sq. Mount.68/.68 /8-6 Nose Mount / Sq. Head Mount.5/. /8 /8- Nose Mount.9/.9 / /8- Nose Mount / Sq. Head Mount / Sq. Mount.9/.9 / - Nose Mount / Sq. Head Mount / Sq. Mount./. /- Nose Mount / Sq. Mount./. Sq. Head Mount./. 5/8 /- Nose Mount / Sq. Head Mount / Sq. Mount./. /- Nose Mount / Sq. Head Mount / Sq. Mount./. F F G H " " /8" " " Mounting Style/ HB HB HB 9 HB HB HB 5 HB 6 HB HB 8 HB 9 HB 0 HB HB HB HB Stroke is stroke in total /8" increments xample: " stroke = 8 /" stroke = 0 Piston Rod Threads HB6, HB9, HB ouble rod models have same rod thread both ends Cyl. bore All /8 Rod dia. Rod th'd All Plain Rod /-0 x 5/8 /-8 x 5/8 5/6-8 x 5/8 5/6- x 5/8 5/6-8 x 5/8 5/6- x 5/8 /8-6 x 5/8 /8- x 5/8 5/6-8 x 5/8 5/6- x 5/8 /8-6 x 5/8 /8- x 5/8 /- x 5/8 /-0 x 5/8 /- x /-0 x x / x / /8- x /.65 5/8-8 x /.50-0 x / x / 0

7 TM Series HB cylinder options List codes in the same sequence as they appear below Option escription xtra rod extension Specify code letter J followed by the extra length as a two place decimal. xample: J.50 = /" extra J.5 = /"extra HB6, 9, double rod cylinders with extra extension cannot be ordered by a standard part number - consult factory for a special part number. Wrench flats Shock pads Rod wiper Optional seal compounds Polypak rod seal Specify if required If specified will be added to both ends of HB6, HB9, HB double rod cylinders Available on both ends of double acting cylinders and the end opposite the spring on single acting cylinders. ach pad adds /" to cylinder length. Pneumatic use only to 80 F Pad on rod end only Pad on cap end only Pads on both ends ", " bor e - Not available /8" bore - Available only with /8" rod, /8 - nose mount, " bore - Available all models - standard with trunnion & adj. cushion heads St'd seals are buna (nitrile) and require no code 0 to +00 F Long life available for extended cycle life +0 to +00 F Viton available for temps 0 to +00 F For optimum sealing on hydraulic cylinders Available only in and " bore sizes J K L M N P Q R S Hard chromed rod Hard chrome plated steel - 00,000 min. yield T Magnetic piston Option Not available in " bore Adds /" to cylinder length W Hollow piston rod Available in 5/6 dia. rod thru hole.5" Available in /8 dia. rod thru hole.8" Not available on hard chrome rods X Available in / dia. rod thru hole." Stop tube Available on & " bore only in " increments Specify code Y followed by length in inches xample: Y = " stop tube Adds to cylinder length. An 8" stroke cyl. with " stop tube will be as long as a 0" stoke cylinder. Order actual stroke req. (8" above) Not avail. HB6, 9, or with adj. cushions Oversize ports / NPT ports on bore cylinder (both ends) Z Y Adjustable Cushions Available on /8,, " bore except as follows: Mounting styles HB, 8, 9 Rear port cap on mt'g styles HB,, 0 Cyl. with /" or " oversize rods or oversize ports Cylinders with shock pads Cushion head end only Cushion cap end only Cushion both ends AA BB CC Part No. xample: -5" bore Mounting style HB " stroke /8- x 5/8 th'd rod HB C 6 6 K W ouble acting Magnetic piston Wrench flats /8 rod, 5/8-8 nose mount 8

8 HB Brass SRVIC PARTS / " B o r e S e r v i c e P a r t s Key escription Part Number Key escription Part Number Seal Kit, Buna 05-B 9 Spring stop /" rod pair Seal Kit, Long life 05-LL 9 Spring stop 5/6" rod pair 05- Seal Kit, Viton 05-V 0 Spring - Must supply cyl. stroke 055 Rear port cap Rear pivot cap 90 Rear pivot cap Head / rod Head 5/6 rod Head / rod TRN 5 6 Rear stud cap Tube - P.N. is T followed by the complete cyl. part no Head 5/6 rod Head / rod Head 5/6 rod Magnet Shock pad pair 050- TRN SS0 5MSP 8 Rod - P.N. is PR followed by the complete cyl. part no. " B o r e S e r v i c e P a r t s Key escription Part Number Key escription Part Number Seal Kit, Buna 00-B 9 Spring stop 5/6" rod pair 00- Seal Kit, Long life 00-LL 9 Spring stop /8" rod pair 00-5 Seal Kit, Viton 00-V 0 Spring Head 5/6 rod, 5/8-8 nose Head /8 rod, 5/8-8 nose Head /8 rod, - 6 nose Tube - P.N. is T followed by the complete cyl. part no Head 5/6 rod, 5/8-8 nose Head /8 rod, 5/8-8 nose Head 5/6 rod Head /8 rod 000-TRN 000-5TRN Rod - P.N. is PR followed by the complete cyl. part no. / 8 " B o r e S e r v i c e P a r t s Key escription Part Number Key escription Part Number Seal Kit, Buna, 5/6 rod -B 0 Spring 0 - /" Stroke 5 Seal Kit, Buna, /8 rod -5B 0 Spring 0ver - /" Stroke 005 Seal Kit, Buna, / rod -500B Head, 5/6 Rod, 5/8-8 Nose Seal Kit, Long life, 5/6 rod -LL Head, 5/6 Rod, 5/8-8 Nose, Cushion 5--65C Seal Kit, Long life, /8 rod -5LL Head, /8 Rod, 5/8-8 Nose Seal Kit, Long life, / rod -500LL Head, /8 Rod, 5/8-8 Nose, Cushion C Seal Kit, Viton, 5/6 rod -V Head, /8 Rod, - 6 Nose Seal Kit, Viton, /8 rod -5V Head, /8 Rod - 6 Nose, Cushion C Seal Kit, Viton, / rod -500V Head, /8 Rod /8 - Nose Head, /8 rod, /8 - nose, cushion C Add suffix C for cushion 06 Head, /8 rod, /8 - nose, wiper W 90 Add suffix C for cushion 0690 Head, / rod, /8 - nose

9 / 8 " B o r e S e r v i c e P a r t s (Cont.) Key escription Part Number Key escription Part Number Add suffix C for cushion 0 08 Head, 5/6 rod, 5/8-8 nose Head, /8 rod, 5/8-8 nose 5-TRN 5-5TRN 5 Add suffix C for cushion 09 Head, / rod, /8 - nose TRN 6 Add suffix C for cushion 5 Head, 5/6 rod - 8 Tube P.N. is T followed by the complete cyl. P.N. Rod P.N. is PR followed by the complete cyl. P.N. Head, 5/6 rod, cushion Head, /8 rod -C -5 9 Stop 5/6 rod, 0 /" stroke - Head, /8 rod, cushion -5C 9 Stop 5/6 rod, over /" stroke (pair) 00- Head, / rod Stop /8 rod, 0 /" stroke -5 Magnet pair SMS59 9 Stop /8 rod, over /" stroke (pair) Screw ass'y Add suffix V for Viton 9 Stop / rod, 0 /" stroke Shock pad MSP 9 Stop / rod, over /" stroke (pair) / " B o r e S e r v i c e P a r t s Add suffix HY to seal kit part no. if polypak hyd. rod seal is required Seal Kit, Buna, / rod B Seal Kit, Buna, rod 50-50B Seal Kit, Longlife, / rod LL Seal Kit, Longlife, rod 50-50LL Seal Kit, Viton, / rod V Seal Kit, Viton, rod 50-50V /" port add suffix C for cushion 5006 /" port add suffix C for cushion /" port add suffix C for cushion 500 /" port /" port add suffix C for cushion /" port add suffix C for cushion /" port Tube - P.N. is T followed by the complete cyl. part no. 8 Rod - P.N. is PR followed by the complete cyl. part no. 9 Stop, / rod, st'd pair Stop, / rod, spring extend over " str L 9 Stop rod, st'd pair Stop rod, spring extend over " str L Add suffix HY to seal kit part no. if polypak hyd. rod seal is required Seal Kit, Buna, 5/8 rod 00-65B Seal Kit, Buna, rod 00-50B Seal Kit, Long life, 5/8 rod 00-65LL Seal Kit, Long life, rod 00-50LL Seal Kit, Viton, 5/8 rod 00-65V Seal Kit, Viton, rod 00-50V 000 add suffix C for cushion add suffix C for cushion add suffix C for cushion add suffix C for cushion add suffix C for cushion 005 Tube - P.N. is T followed by the complete cyl. part no. 8 Rod - P.N. is PR followed by the complete cyl. part no. 9 Stop, 5/8 rod, st'd pair Stop, 5/8 rod, spring extend over " str L 0 St'd spring Spring, over " spring extend only 505L Head, / rod Head, / rod, / port Head, / rod, wiper W Head, / rod, / port, wiper W Head, / rod, cushion C Head, rod Head, rod, / port Head, rod, wiper W Head, rod, / port, wiper W Head, / rod TRN Head, rod TRN Head, / rod, / port TRN Head, rod, / port TRN Head, / rod Head, / rod, / port Head, / rod, wiper W Head, / rod, / port, wiper W Head, / rod, cushion C Head, rod Head, rod, / port Head, rod, wiper 50-50W Head, rod, / port, wiper W Magnet pair SS5 6 Shock pad 5MSP " B o r e S e r v i c e P a r t s 9 Stop, rod, st'd pair Stop, rod, spring extend over " str L 0 St'd spring Spring 0ver - " spring extend only 005L Head, 5/8 Rod Head, 5/8 Rod, wiper W Head, 5/8 Rod, Cushion Head, Head, Rod, wiper Head, 5/8 Rod C W TRN Head, Rod Head, 5/8 Rod, wiper TRN Head, 5/8 Rod, wiper 00-65W Head, 5/8 Rod, cushion 00-65C Head, Rod Head, Rod, wiper 00-50W 6 Magnet pair SS0 Shock pad MSP 8

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity