SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
|
|
- Whitney Cooper
- 6 years ago
- Views:
Transcription
1 SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE SPANNER HOLES PISTON PACKING U cup seal provides positive sealing, low friction and long life. TUBE SEAL Synthetic O rings for positive sealing. Repairable Industrial Quality Cylinders INTERCHANGEABLE WITH (Bimba, Humphrey, Clippard and others) COMMON INFORMATION - AIR CYLINDER & HYDRAULIC CYLINDERS LARGE PORTS Precision dryseal ports permit maximum flow. PACKING U cup seals for zero leakage, low friction and long life. SPANNER HOLES Supplied for ease in assembly and disassembly of the cylinder. PISTON Machined from turned ground and polished high tensile strength steel. WIPER Protects piston rod, rod bearing and rod packing, supplied on all models P, PC, PS, D, DP, DS and DR. PISTON CYLINDER TUBE Hard coated I.D., heavy wall aluminum tube (an industry standard) is precision machined for perfect fit and alignment. BRONZE BEARING Extra long, bronze rod bearing is accurately pressed and reamed at assembly to insure perfect alignment and maximum support of piston rod. Supplied on all cylinders. ALUMINUM HEADS & CAP Machined to close tolerance for perfect alignment. Threaded construction assures maximum strength and reliability. SERIES B HYDRAULIC CYLINDERS 1 1 8, AND 2" BORE SIZE IN D, DP AND DS MODELS 800 PSI MAX PRESSURE ALUMINUM HEADS & CAPS * WIPER LARGE PORTS *PISTON PACKING BRONZE BEARING * PACKING *TUBE SEAL CYLINDER TUBE SPANNER HOLES * Polyurethane Rod Packing * Polyurethane Rod Wiper TUBE SEAL Located to provide 0 hoop stress on tube threads. PISTON PACKING High pressure T seal provides positive sealing over long life. 1
2 SINGLE ACTING CYLINDERS MODELS S PUSH TYPE RETRACTED MODEL DIA. A B C D E F G H P S V S S S S S NOTED BELOW 1" INCH STROKE = " INCH STROKE = " INCH STROKE= " INCH STROKE = MODELS P PULL TYPE EXTENDED MODEL DIA. A C D E F G H P SS Z P P P P * P NOTED BELOW 1" INCH STROKE = " INCH STROKE = " INCH STROKE = " INCH STROKE = *1.25 E DIMENSION OPTIONAL ON P & PC MODELS. SPECIFY SEPARATELY. MODELS N PUSH TYPE RETRACTED Non-Rotating Rod S.S. Rod Standard MODEL DIA. A B C D E F J H P T V N N N N
3 SINGLE ACTING CYLINDERS SC MODELS ONLY EXCEPT 2" BORE MODEL DIA. A B C D E F G H* K L M N P V W SC SC SC SC SC NOTED BELOW 1" INCH STROKE =7 68 2" INCH STROKE = " INCH STROKE = " INCH STROKE = *SS MODELS 1 2 AND 3 4 BORE CAP THREAD AND RESPECTIVELY PC MODELS ONLY EXCEPT 2" BORE MODEL DIA. A C D E G F H* K L M P X Z PC PC PC PC PC NOTED BELOW 1" INCH STROKE = " INCH STROKE = " INCH STROKE = " INCH STROKE = *PC MODELS FRONT HEAD ONLY EXCEPT 2" BORE. B & N DIMENSIONS SAME AS SC MODELS NC MODELS ONLY MODEL DIA. A B C D E F J H* K L M N P U Y NC NC NC NC *NS MODELS 1 2 AND 3 4 BORE CAP THREAD AND RESPECTIVELY 4 MODELS SC & SS PUSH TYPE RETRACTED * SS = Full Thread H Dim. * SC = Pivot Ear N Dim. MODELS PC & PS PULL TYPE EXTENDED * PS = Full Thread H Dim. * PC = Pivot Ear N Dim. MODELS NC & NS PUSH TYPE RETRACTED Non-Rotating Rod * NS = Full Thread H Dim. * NC = Pivot Ear N Dim. S.S. Rod Standard
4 MODEL DIA. A B C D E F G H P LL D D D D D MODELS D MODELS DP MODEL DIA. A B C D E F G H K L M N P TT DP DP DP DP DP MODELS DS STUD MOUNT MODEL DIA. A B C D E F G H M P TT DS DS DS DS DS
5 ACCESSORIES Clevis SUPPLIED WITH CLEVIS PIN & E-RINGS C C C C C Pivot Mount SUPPLIED WITH PIVOT PINS PM PM-1.75& PM PM Foot Mount SUPPLIED WITH NUT & TOOTH LOCK WASHER FM FM FM FM-2.75& FM FM Mounting Nuts & Tooth Lock Washers MOUNTING NUT BORE H T W NMN NMN NMN NMN 2.75& NMN NMN FOR DISASSEMBLY AND REPAIR Spanner Wrench PISTON JAM NUTS SUPPLIED ON ALL CYLINDERS. PACKING REPAIR KITS TO ORDER PACKING REPAIR KIT SPECIFY MODEL BORE SIZE AND HOW MANY ARE REQUIRED. Model SW-1 for.75 & 1.12 bores Model SW-2 for 1.50 & 2.00 bores FOR TOOL TO INSTALL PACKING AND PUSH ON PACKING RETAINER CONSULT FACTORY OR DISTRIBUTOR. 7
Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationCylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi
Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released 10 91 113A Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationThe friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
More informationFA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationContents. Hydraulic Cylinder
Hydraulic Cylinder Contents Tie Rod Cylinders of 2500psi series----------------------------------------2~3 Tie Rod Cylinders of 3000psi series----------------------------------------4~5 NFPA interchangeable
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationSTAINLESS STEEL CYLINDER CONSTRUCTION
STAINLESS STEEL CYLINDER CONSTRUCTION In the early 950 s, Clippard introduced miniature pneumatic cylinders and valves to industry. No other manufacturer can boast of the same experience or knowledge of
More informationSeries SS Solid Stainless Cylinders
Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationOriginal Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non-Repairable Original Line Steel Repairable (Bell
More informationCYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS
YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free
More informationPL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationMiller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011
Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0
More informationSeries NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".
ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return
More informationCatalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders
Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................
More informationTable of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5
With Continuous Position Feedback Catalog AU08-0971/NA September, 2002! Compact Design! Highly Accurate Position Feedback Capability! Electronic Controllers Available! 5 Bore Sizes Table of Contents General
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationPosition Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated
Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationCatalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders
Catalog PN- Prices effective September 1, 011 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders 5-8-10 Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD
More informationHH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
More informationQUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless
QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series
More informationFlat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
More informationBimba Original Line - Stainless Steel Body Air Cylinders
Bimba Original Line - Stainless Steel Body Air Cylinders How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and
More informationOptions selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
More informationSC series Stopper Cylinders
SERIES 60,000 PSI tensile strength electro-less nickel rod bearing High strength threaded connection Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover series Stopper Cylinders Common
More informationSC series Stopper Cylinders
High strength threaded connection Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire 60,000 PSI tensile strength electro-less nickel rod bearing Low friction figure 8 piston seal
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationAir/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TECHNICAL DATA: FORCE CHART BORE STROKE
How to determine the right size Cylinder for the job TECHNICAL DATA To determine what size cylinder the task requires, you need to answer a few questions about three main points: load, velocity and air
More informationSRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback
with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical
More informationCylinders Small Bore Tie Rod
Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationOriginal Line Cylinders
How to Order Introduction to Bimba 1.3 1.4-1.9 Standard Air 1.10-1.66 Three-Position 1.67-1.68 Air with Adjustable Cushions 1.69-1.76 MRS 1.77-1.87 Non-Rotating Air 1.88-1.98 PC 1.99-1.104 Steel Non-Repairable
More informationSeries MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72
Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic
More informationToll-free: 1 (844) MAGISTER
About Us.................................................... 2 Production................................................... 3 Quality Policy.................................................4 Quality Control................................................5
More information3/4 BORE STAINLESS STEEL CYLINDER FSR SSN SSR TSR-12- -
FSR-12- - Mount: Front Options: M, B, H, V, S, N, W Maximum Stroke: 25 1.000 0.50 2.218 + 1.687 for (2) mounting holes #10-32 thd. x deep (2) mounting holes 0.343 x 0.218 deep counter bore 0.205 - thru
More informationCylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
More informationHTR TIE-ROD CYLINDERS H I K M N TUBE OD
1 Brand Cylinders LINE THE HTR Pressure Ratings: 2" - 4" Bore = 2500 PSI, 5" Bore = 2000 PSI BORE (INCH) B C D E F G = J 2.0 1.015 2.125 1.625 1.000 1.000 1.142 2.5 1.015 2.125 1.625 1.000 1.000 1.142
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationSERIES HH WITH HYDRAULIC ROD LOCK
HH LOCK TAB HH Rod Lock HH Options SERIES HH WITH HYDRAULIC LOCK The TRD difference... TRD s floating rod bushing design and RL Series Rod Lock = OPTIMIZED RESULTS and SUPERIOR PERFORMANCE. For rod locks
More informationLION HYDRAULIC TIE-ROD CYLINDERS
LION HYDRAULIC TIE-ROD CYLINDERS 2 and 2-1/2 have 3/8 NPT Ports Rest have 1/2 NPT ports Double Ported NPFT Inline Ports M1 LH SERIES 3000 PSI Size Inches Pin to Pin Our Price Bore & Rod Center Cylinder
More informationOriginal Line Cylinders
How to Order Introduction to Bimba Standard Air.3.4-.9.0-.65 Three-Position.66-.67 Air with Adjustable Cushions.68-.75 MRS.76-.86 Non-Rotating Air.87-.97 PC.98-.03 All Stainless Steel Repairable (Bell
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More informationMaterial Specifications
5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationFlat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power)
Flat Cylinders Flat-1 2.3-2.11 SquareFlat-1 2.12-2.18 Flat-11 2.19-2.23 SquareFlat-11 2.24-2.28 FO2, FO3, FO4(multiple power) 2.29-2.34 FOP(multiple position) 2.35-2.41 Flat Accessories 2.42-2.43 EF1 Cylinders
More informationIndustrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
More informationA SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI
A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and
More informationSeries SIT Hydraulic Cylinders Single acting Internal Thread
ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments:
More informationParker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
More informationCylinder Maintenance & Repair Instructions
Cylinder Maintenance & Repair Instructions PENINSULAR CYLINDER CO. Model HP High Pressure Hydraulic Cylinders Proximity Switch & Non Proximity Switch Designs - High Pressure NFPA Hydraulic Cylinder ( 5,000
More informationTaskMaster Pneumatic Cylinder
TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles
More informationSERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationPneumatic Cylinders. Series 3A and 3AN. Series 3A and 3AN
Series 3A and 3AN for Heavy-Duty Service n High-Tech Duralon Rod Bearing n State-of-the-Art Rod and Piston Sealing System n Heavy-Duty Piston-to-Rod Connection n1.50" 14.00" Bores n 150 250 psi Pressure
More information* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationField-Mate Series Agricultural Cylinders. ASAE Interchangeable HYDRO-LINE
Field-Mate Series Agricultural Cylinders ASAE Interchangeable HYDRO-LINE Table Of Contents How to Order a Field-Mate Cylinder...page 2 Cylinder Port Options and Rod Requirements by Stroke...page 2 Field-Mate
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic
More informationSERIES HH (NFPA) CYLINDER
HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment
More informationCYLINDER PARTS LIST. R/S Series Cylinders, 1978 through July AB Series Cylinders, 1988 through AF Series Cylinders, 1990 through 1993
The purpose of this book is to provide general guidelines to cylinders and their replacement parts for machinery built between 1978 and the present. Approximate dates are intended to assist in pinpointing
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body
More informationTork-Mor Series Vane Style Hydraulic Rotary Actuators
Vane Style Hydraulic Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features...2 Ordering Information...3 Specifications...4 Dimensional Data...5 Mounting... 6-7 Shaft...7 Limit Switch Actuator...7
More informationLinear Thrusters/PneuMoment
/PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment
More informationFP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
More informationRotary Actuators Actuators Three-Position Engineering Specifications/ Application Checklist 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES
More informationStainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for
More informationSELECTION CHARTS 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust 112
SELECTION CHARTS 4-Way s Flow @ 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust TV-4D Spool 7.5 scfm #10-32 #10-32 holes in body D 126 TV-4D-M5 Spool 180 l/min M5 M5 holes in body D 126 TV-4M
More informationNFPA Style Hydraulic Rod Clamps RCH SERIES ROD LOCKS
NFPA Style Hydraulic Rod Clamps RCH SERIES ROD LOCKS FEATURES AND BENEFITS The AMLOK Rod Clamp has been developed to provide poweroff clamping of rods and shafts. The type RCH Rod Clamps are actuated by
More informationDuty Types and Forces
Types and Forces Threaded Body Metric Cylinders cting Compact Cylinders, End s: mm, mm, and mm Threaded Body Metric Cylinders TB series cylinders are single acting. Their single port is located at the
More informationLP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51
Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58
More informationMH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar
ISO 00 RISTRD Specials are Our Standard MH NPA MX MH NPA MX MH NPA MX2 ISO MX ISO MX ISO MX2 MH SRIS MH MH MH NPA ISO M M NPA ISO M M NPA ISO M2 MS2 MTRIC HDRAULIC CLINDRS MH NPA ISO MS2 MP MH2 NPA ISO
More informationSTAINLESS STEEL SERIES LSSW HIGH PRESSURE HYDRAULIC CYLINDERS INSTALLATION & OPERATING INSTRUCTIONS
CATALOG: LSSW-00 STAINLESS STEEL SERIES LSSW HIGH PRESSURE HYDRAULIC CYLINDERS INSTALLATION & OPERATING INSTRUCTIONS REMEMBER.... WHEN PERFORMANCE COUNTS SPECIFY LEHIGH LEHIGH FLUID POWER, INC. 1413 ROUTE
More informationJIT Cylinders A Series Catalog
JIT Cylinders A Series Catalog Table of Contents Introduction to Excellence Introduction Page 1 Model Code 2 Cylinder Cross Section 3 Feature, Advantages, Benefits 4 Application Data 5 Cylinder Options
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationUltran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides
5.3-5.4 5.5-5.12 5.13-5.23 5.24-5.32 Ultran Band Rodless 5.33-5.43 Ultran Application Checklist 5.44 Electric 5.45-5.53 Ultran Ultran Bimba Ultran SPACE SAVINGS OF ALMOST 50% IN MOST MODELS Two Models:
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationPRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS.
PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS. TABLE OF CONTENTS 3 Compact Hydraulic 4 Product Features 4 Features and Benefits 5 How it Works 5
More information