FULL COLOR TAB #6 TC 105

Size: px

Start display at page:

Download "FULL COLOR TAB #6 TC 105"

Mervyn Richardson
5 years ago
Views:

1 FULL COLOR TAB #6 TC 105

2 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty Construction Rated for Non-Lube Service Standard NFPA Mounting Internal Bumpers at Each Stage CYLINDER STROKE 106 SPACE SAVING DESIGN STROKE EXAMPLES FOR 1.50 BORE NOTE: CYLINDERS ARE MADE TO ANY STROKE STANDARD NFPA CYLINDER TELESCOPING CYLINDER SPACE SAVINGS % % % % % % % % %

3 TC SERIES 125 PSI AIR BASE BAR MF1 MF2 MP1 MP2 MP4 MS1 MS4 MT2 MX0 TC - MS x 10 x 2S - KK2 - SSA NFPA MOUNTS SIDE LUG MOUNT (NON-NFPA) FRONT FLANGE REAR FLANGE REAR PIVOT CLEVIS REAR PIVOT CLEVIS REAR PIVOT EYE FRONT & REAR ANGLES BOTTOM TAPPED HOLES REAR TRUNNION NO MOUNT SERIES TC : HOW TO ORDER BORE STROKE 0 to 60 MADE-TO- ORDER STAGES 2S TWO STAGE OPTIONS A= EXTENDED PISTON ROD THREAD (EXAMPLE: A=2) C= EXTENDED PISTON ROD (EXAMPLE C=3) KK2 LARGE MALE ROD THREAD KK3 FEMALE ROD THREAD STUDDED PISTON ROD KK3S (KK3 WITH STUD, LOCTITE IN PLACE) KK4 FULL DIAMETER MALE ROD THREAD MAGNETIC PISTON FOR REED OR SOLID STATE SWITCHES MPR TRD MODELS R10, RAC, AND MSS. NOTE: MAGNET IS ONLY ON 1ST STAGE AND WILL ONLY DETECT THE POSITION OF ONE STAGE. OS OS = 1 PISTON ROD (AVAILABLE ON 2.50 BORE ONLY OP OPTIONAL PORT LOCATION (EXAMPLE: OP=3 AND 7) STAINLESS STEEL PISTON ROD, TIE RODS & NUTS AND SSA FASTENERS SSF STAINLESS STEEL FASTENERS SSN STAINLESS STEEL TIE ROD NUTS SSR STAINLESS STEEL PISTON ROD SST STAINLESS STEEL TIE RODS XX SPECIAL VARIATION (SPECIFY: XX=) About Rod End Styles Style 1* Male Rod End is STANDARD Other NFPA Styles can be specified (see chart). Need a rod end not listed? NO PROBLEM! Each Piston Rod is made-to-order and does not delay shipment. Coarse UNC threads, Metric threads or just plain rod ends are common. Thread lengths are also made-to-order (Specify: A =Length). STYLE 1 & 2 KK1 & KK2 STYLE 3 KK3 STYLE 4* KK4 NEED SOMETHING NOT LISTED? Just send us a sketch. In most cases, quotes are turned around in one day! STANDARD OPTIONAL MM ROD STYLE 1 - MALE STYLE 2 - MALE STYLE 3 - FEMALE STYLE 4 - MALE* BORE DIAMETER KK1 A KK2 A KK3 A KK4 A C / & / / / / / / / *Style 4 (KK4) is standard thread on 0.75 bore. Design Tips: Cylinders are designed to support the unit s weight only, and not intended for side-load applications. All loads should be guided and supported. For proper speed control, use meter-in type flow control devices. In high cycle speed applications, external shock absorbers should be used at end of strokes. OPERATING PRESSURE 125 PSI AIR OPERATING TEMPERATURE -20 F to 200 F (-29 C to 93 C) 107

4 SERIES TC BORE: CONSTRUCTION ROD PISTON ROD SEAL ROD BUSHING I.D. TUBE ROD SEAL ALUMINUM HEAD PTFE WEAR BANDS (2) TUBE SEALS (2) TUBE HEAD BUMPER PISTON PISTON SEAL (2) PTFE WEAR BAND CAP BUMPER TIE ROD (4) ALUMINUM CAP HEAD BUMPER PISTON SEAL (2) PTFE WEAR BAND PISTON CAP BUMPER SLEEVE NUT (4) CYLINDER FORCE COMPARISON CHART (AT 100 PSI) TYPE STROKE 1ST STAGE 2ND STAGE 2-Stage Push 176 lbs 44 lbs Telescoping Pull 98 lbs 33 lbs Standard Push 44 lbs N/A 0.75 Bore Pull 33 lbs N/A 108

5 SERIES TC DIMENSIONS: BASE MOUNTS (STROKES 0 to 36 ) 109

6 SERIES TC DIMENSIONS: PIVOT MOUNTS (STROKES 0 to 24 ) 110

7 SERIES TC BORE: CONSTRUCTION PISTON ROD ROD WIPER ROD SEAL ROD BUSHING BUMPER RETAINER O.D. TUBE ROD WIPER/SEAL ALUMINUM HEAD PTFE WEAR BAND (2) BUMPER PISTON SEALS (2) O.D. PISTON PTFE WEAR BAND O.D. PISTON PTFE WEAR BAND PISTON SEAL (2) TUBE TUBE SEALS (2) ALUMINUM CAP TIE RODS (4) SLEEVE NUT (4) CAP BUMPER HEAD BUMPER CYLINDER FORCE COMPARISON CHART (AT 100 PSI) TYPE STROKE 1ST STAGE 2ND STAGE 2-Stage Push 490 lbs 176 lbs Telescoping Pull 250 lbs 146 lbs Standard Push 176 lbs N/A 1.50 Bore Pull 146 lbs N/A 111

8 SERIES TC DIMENSIONS: BASE MOUNTS (STROKES 0 to 60 ) 112

9 SERIES TC DIMENSIONS: PIVOT MOUNTS (STROKES 0 to 36 ) 113

10 SERIES TC BORE: CONSTRUCTION PISTON ROD ROD WIPER ROD SEAL ROD BUSHING O.D. TUBE ROD WIPER/SEAL ALUMINUM HEAD PTFE WEAR BAND (2) BUMPER PISTON SEALS (2) PISTON PTFE WEAR BAND 4.00 PISTON PTFE WEAR BAND 4.00 PISTON SEAL (2) O.D. TUBE 4.00 TUBE SEALS (2) ALUMINUM CAP TIE RODS (4) SLEEVE NUT (4) BUMPER PISTON SEAL BUMPER PISTON SEAL BUMPER RETAINER CYLINDER FORCE COMPARISON CHART (AT 100 PSI) TYPE STROKE 1ST STAGE 2ND STAGE Push 1256 lbs 490 lbs 2-Stage Pull (0.625 rod) 662 lbs 460 lbs Telescoping Pull (1.000 rod) 662 lbs 412 lbs Standard 2.50 Bore Push 490 lbs N/A Pull 460 lbs N/A Other Models in Development Stainless Steel for Food Applications (Note: Rod Orifices are replaced with NPT Port for sealed system Contact TRD with your application). 114

11 SERIES TC DIMENSIONS: BASE MOUNTS (STROKES 0 to 60 ) 115

12 SERIES TC DIMENSIONS: PIVOT MOUNTS (STROKES 0 to 36 ) 116

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder