Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72

Size: px
Start display at page:

Download "Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72"

Transcription

1 Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic Cylinders are built to perform on the toughest applications. Series MH tiered cylinders are built to ISO spec 2, with maximum operating pressures up to 2 bar on all standard bore sizes. If your application requires higher operating pressures, consult our engineers. Milwaukee Cylinder helps you solve even more application needs with our expanded ISO Metric Cylinder product line.

2 Index Page MTRIC Cylinder Piston Rod nd Inside Cover page iii eneral Standard Specifications and eatures 8 Performance Tested Design eatures Tie Rod Mount Solid nd Cap and Side Lug Mount Mounting Specifications Pin Mount Trunnion Mount Double Rod nd Cylinders 8 Additional Information Ordering Information

3 Standard Specifications and eatures STANDARD SPCIICATIONS Series MH Series H Standard construction square head tierod design ISO 2 Nominal pressure 2 bar; see info box below Standard fluidhydraulic oil Standard temperature C to + C 2 Standard bore sizes mm thru 0 mm 8 Standard piston rod diameters 2 mm thru mm Standard mounting styles 2 standard styles and custom designs to suit your needs Strokes available in any practical stroke length Cushions available at either end or both ends of stroke Three standard rod end styles and specials designed to order If your hydraulic operating pressure exceeds 2 bar, send your application data for engineering evaluation and design recommendations. MilCad Cylinder Configurator isit milwaukeecylinder.com to configure and download CAD files of your cylinders. STANDARD ATURS. Removable Retainer Plate The retainer plate and rod bushing are externally removable without disassembling the cylinder on most standard models. our capscrews securely hold and lock the retainer plate in place. 2. Rod Bushing and Seals A Ucup Rod Seal with a supporting bronze bushing is standard in Milwaukee Cylinder Series MH Cylinders.. Ports BSPP/ (ISO ) cylinder ports are standard and can be located to customer requirements. ISO ports optional.. Piston Rod The piston rod is of high strength steel, hardened and plated to resist scoring and corrosion, assuring maximum life.. Piston The piston is of fine grained alloy iron, incorporating ucup seals, ensuring nonleak HiLo pressure performance. The piston is pilot fitted and threaded to the rod.. Cylinder Barrel and Seals The barrel is of steel tubing, honed to a fine finish to assure superior sealing, minimum friction and maximum seal life. 8. TieRods and Nuts The tierods are constructed from a high quality medium carbon steel. On most sizes the threads are rolled for rigid engagement of the selflocking nuts.. Cushions Cushions are machined to close tolerance to provide positive, smooth deceleration at the end of stroke. On all bore sizes, we provide the longest cushion possible based on the rod size and blind end caps. Longer cushions are available; for further information, consult factory.. Cushion Needle Adjustment and Ball Check The cushion needle adjustment valve and cushioncheck ball retainer screw are specifically designed to provide full cushion adjustment.. nd Caps nd caps and mountings are of high quality steel, precision machined for accurate mounting. 8

4 Performance Tested Design eatures COMBINATION ROD SAL DSIN Simple Maintenance Simple maintenance is reality with a Milwaukee Cylinder. The rod bushing or rod seals can be inspected or serviced by merely removing the cap screws and retainer plate on most models. Standard available shop tools can be used to remove the rod bushing and seals without disturbing the torque on the tierods, assuring performance quality with maintenance ease. Cushions The cushion is of a highgrade alloy, precision machined and specially tapered to provide smooth deceleration of the piston at the end of stroke. A standard manufacturing process at Milwaukee Cylinder is to assemble the piston, cushion, and the piston rod; placing the assembly between centers and checking the critical diameters for concentricity. Piston Rod Cushion Piston Rod The piston rod is hardened, plated high strength steel, machined and processed to resist scoring and corrosion, assuring maximum life. Milwaukee Cylinder offers three rod end styles as standard. The style #2 rod end with two wrench flats is furnished as standard unless otherwise specified. Special rod ends and extra wrench flats are also available. They must be specified at the time of order, giving the dimensional requirements and the location of additional wrench flats. The Series MH cylinder design is a onepiece rod bushing with a double lip ucup rod seal, a supporting bearing ring, and a double lip wiper. COMBINATION SALIN ROD The Series MH cylinder combines two bidirectional sealing ucup seals and a fine grained alloy iron piston. This proven piston seal design is effective at both high and low pressures. The design gives the wear and shock absorbing qualities of cast iron and the near zero leakage of the ucup seals. Series MH Series LH Series A Series MN HydPneu Devices Cyl Accessories Manipulators Power Units/alves Design uide

5 Series MH, Tie Rod Mount Series MH Series H & mm Cylinders mm mm mm extra height applies to port face at the rod end caps only. TI ROD MOUNTD CLINDRS The flange and tierod mounts are basically the same, except that the cylinder tierods are extended and used to mount the cylinder. To prevent misalignment, sagging, or possible binding of the cylinder, when long strokes are required, the free end should be supported. The best use of tierods when extending on the blind end is in a thrust load application. hen using tierods extended on the rod end, the best application is a tension load. Tie rod mounts are suited for many applications, but it should be noted that they are not as rigid as the flange type of mounting. TI RODS XTNDD BOTH NDS B Rod nd Table ZT + STRO ZB + STRO P + STRO LB + STRO 2 MODL MH ISO STL MX AA DD BB BB TI RODS XTNDD ROD ND B Rod nd Table ZB + STRO P + STRO LB + STRO 2 MODL MH2 ISO STL MX AA DD BB TI RODS XTNDD BLIND ND Rod nd Table ZT + STRO ZB + STRO P + STRO LB + STRO AA (BOLT CIRCL) 2 DD MODL MH ISO STL MX2 BB

6 Dimensional Data Tie Rod Mount TABL MH The dimensions given on this table are affected by the piston rod diameter and the stroke. 0 0 Rod Cylinder Code B LB P ZB ZT Cushions not available on rod end. Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. The dimensions are constant regardless of rod TABL 2MH diameter or stroke AA BB DD BSPP MH0 MH02 MH MH MH MH2 MH0 MH MH MH MH MH MH MH MH2 MH MH MH2 MH0 MH MH2 MH MH MH2 MH0 MH MH M X 0.8 M X M8 X M2 X. M2 X. M X. M X. M X. M2 X 2 M0 X ⅜ HO TO ORDR or ordering information refer to page. CAUTION NOTS: NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page 8.) Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Piston Rod nd Styles". Page MilCad Cylinder Configurator isit milwaukeecylinder.com to configure and download CAD files of your cylinders. iii Series MH Series LH Series A Series MN HydPneu Devices Cyl Accessories Manipulators Power Units/alves Design uide

7 Series MH, Solid nd Cap & Side Lug Mounts Series MH Series H & mm Cylinders mm mm mm extra height applies to port face at the rod end caps only. SOLID ND CAP MOUNTD CLINDRS Milwaukee Cylinder's solid end cap mount is one of the strongest, most rigid methods of mounting. This type of rod end cap mounting is best in a tension application. A solid blind end cap mounting is best in a thrust application. SOLID ROD ND CAP MOUNT lange rated for 2 bar operation. U RD Rod nd Table L ZB + STRO P + STRO LB + STRO 2 R RD 0.2 MODL MH* ISO STL M T B HOLS SOLID BLIND ND CAP MOUNT lange rated for 2 bar operation. Rod nd Table P + STRO LB + STRO U 2 R MODL MH ISO STL M X + STRO B HOLS T mm and mm port at Rod nd available in Position # only. SID OR LU MOUNTD CLINDRS The side or lug mounted cylinder provides a fairly rigid mount. These types of cylinders can tolerate a slight amount of misalignment when the cylinder is at full stroke, but as the piston moves toward the blind end, the tolerance for misalignment decreases. It is important to note that if the cylinder is used properly (without misalignment), the mounting bolts are either in simple shear or tension without any compound stresses. Rod nd Table ZB + STRO P + STRO LB + STRO MODL MH ISO STL MS2 ST 2 TS US 2 * h SB HOLS XS S SS + STRO Z SB iew at Z SS

8 Dimensional Data Solid nd Cap & Side Lug Mounts TABL MH 0 0 Rod Cylinder Code MH0 MH02 MH MH MH MH2 MH0 MH MH MH MH MH MH MH MH2 MH MH MH2 MH0 MH MH2 MH MH MH2 MH0 MH B The dimensions given on this table are affected by the piston rod diameter and the stroke. LB P RD SS L X XS ZB f8 min MH2 Cushions not available on rod end. Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. The dimensions are constant regardless of rod TABL 2MH diameter or stroke B R SB ST S TS T U US BSPP * *. 2. ⅜ * mm and mm port at rod end available in position # only (MH only) HO TO ORDR or ordering information refer to page. NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page 8.) Double rod ends are not available on clevis mount Series MH cylinders Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Piston Rod nd Styles". Page MilCad Cylinder Configurator isit milwaukeecylinder.com to configure and download CAD files of your cylinders. iii Series MH Series LH Series A Series MN HydPneu Devices Cyl Accessories Manipulators Power Units/alves Design uide

9 Series MH, Pin Mount Series MH Series H & mm Cylinders mm mm mm extra height applies to port face at the rod end caps only. PIN MOUNTD CLINDRS All pin cylinders need a provision on both ends for pivoting. These types of cylinders are designed to carry shear loads and pivot pins should be carried by bearings that are rigidly held and closely fit for the entire length of the pin. CLIS MOUNT Rod nd Table ZC + STRO P + STRO LB + STRO CD H Hole 8 Pin UB MR 2 MODL MH ISO STL MP XC + STRO LR L M Pivot Pin Included CB IXD MOUNT Rod nd Table ZC + STRO P + STRO LB + STRO CD H hole MR 2 MODL MH ISO STL MP XC + STRO LR L M SPHRICAL MOUNT Rod nd Table ZH + STRO P + STRO LB + STRO H 2 CX X 2 MODL MH2 ISO STL MP XH + STRO N P

10 Dimensional Data Pin Mount TABL MH 0 0 Rod CB A Cylinder Code TABL 2MH CD CX The dimensions given on this table are affected by the piston rod diameter and the stroke. B LB P XC XH ZC Cushions not available on rod end. Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only MH0 MH02 MH MH MH MH2 MH0 MH MH MH MH MH MH MH MH2 MH MH MH2 MH0 MH MH2 MH MH MH2 MH0 MH MH The dimensions are constant regardless of rod diameter or stroke. HO TO ORDR or ordering information refer to page. NOTS: P X H2 L LR M BSPP h max ⅜ ZH or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page 8.) Double rod ends are not available on clevis mount Series MH cylinders. Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Piston Rod nd Styles" MR Page MilCad Cylinder Configurator isit milwaukeecylinder.com to configure and download CAD files of your cylinders N iii UB max. 2 0 Series MH Series LH Series A Series MN HydPneu Devices Cyl Accessories Manipulators Power Units/alves Design uide

11 Series MH, Trunnion Mount Series MH Series H or Package and Mounting Dimension see Tables MH and 2MH. & mm Cylinders mm mm TRUNNION MOUNTD CLINDRS All trunnion cylinders need a provision on both ends for pivoting. These types of cylinders are designed to carry shear loads and the trunnion and pivot pins should be carried by bearings that are rigidly held and closely fit for the entire length of the pin. See "CAUTION NOT on page. mm extra height applies to port face at the rod end caps only. ROD ND TRUNNION MOUNT UT Rod nd Table ZB + STRO (mmmm bore) ZB + STRO (0mm0mm bore) P + STRO LB + STRO 2 TD MODL MH ISO STL MT Trunnion pins hard chrome plated TC TL X MH mount cylinders with bore sized 0mm through 0mm DO NOT have bolts ont the rod end. Tie rods are threaded into the rod end cap. Use ZB and for this bore size range. BLIND ND TRUNNION MOUNT UT 2 TD See Metric Piston Rod nd Table ZB + STRO (mmmm bore) ZB2 + STRO (0mm0mm bore) P + STRO LB + STRO MODL MH2 ISO STL MT2 Trunnion pins hard chrome plated TC TL X + STRO MH2 mount cylinders with bore sized 0mm through 0mm DO NOT have nuts ont the blind end. Tie rods are threaded into the blind end cap, and secured with nuts () on the rod end. Use ZB2 and for this bore size range. CNTR TRUNNION MOUNT Trunnion pins hard chrome plated Rod nd Table ZB + STRO P + STRO LB + STRO UH 2 TD MODL MH ISO STL MT TM UM BT TL XI* T * Customer to specify XI dimension.

12 Dimensional Data Trunnion Mount TABL MH 0 0 Rod Cylinder H0M Code MH0 MH02 MH MH MH MH2 MH0 MH MH MH MH MH MH MH MH2 MH MH MH2 MH0 MH MH2 MH MH MH2 MH0 MH MH2 TABL 2MH BT The dimensions given on this table are affected by the piston rod diameter and the stroke. B LB P X X ZB ZB ZB2 Cushions not available on rod end. Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only. * Use this dimension for MH mount cylinders with bore sizes 0mm through 0mm. ** Use this dimension for MH2 mount cylinders with bore sizes 0mm through 0mm The dimensions are constant regardless of rod diameter or stroke. BSPP ⅜ * Use this dimension for MH mount cylinders with bore sizes 0mm through 0mm. ** Use this dimension for MH2 mount cylinders with bore sizes 0mm through 0mm TD f TC h * 8* * * TL 2 2** 2** 2** ** TM h HO TO ORDR or ordering information refer to Page. CAUTION NOTS: Rod end trunnion mount cylinders in mm bore (all rod sizes) and 0mm bore, ( and sizes) should not be used over 0 bar. If your application requires higher pressure, consult the factory. NOTS: or double rod end cylinders, add prefix letter D to cylinder code. xample: DMH0. (Refer to page 8.) Double rod ends are not available on clevis mount Series MH cylinders. Rod nd Styles and Dimensions or rod end styles and dimensions see the table in the inside cover of the brochure "MTRIC Piston Rod nd Styles". Page MilCad Cylinder Configurator isit milwaukeecylinder.com to configure and download CAD files of your cylinders. T 0 0 UH UM UT iii Series MH Series LH Series A Series MN HydPneu Devices Cyl Accessories Manipulators Power Units/alves Design uide

13 Series MH, Double Rod nd Series MH Series H & mm Cylinders mm mm mm extra height applies to port face at the rod end caps only. DOUBL ROD ND CLINDRS Double rod end styles are available in every mounting style except clevis. On double rod end cylinders where the rod ends are not the same, be sure to specify clearly which rod end is to go at which end of the cylinder in relation to your mounting requirements. To obtain dimensional information on a double rod end cylinder, first select the desired mounting style and refer to the corresponding single rod end cylinder model shown on the preceding pages. After you have determined all necessary dimensions from the previous page covering the desired mounting, turn back to this page. Supplement those dimensions with additional ones from the drawing below and the table at the right. These added dimensions differ from, or are in addition to, those shown on the preceding pages and provide the additional information needed to completely dimension a double rod end cylinder model. On a double rod end cylinder where two different rod ends are required, or two different rod sizes are required, or cushions on one end are required, be sure to state clearly which rod is to go at which end of the cylinder. hen two types of mounting styles are required, be sure to specify their relationship to the piston rods, if they are not the same. See Piston Rod nd Table (Inside Cover) ZM + 2X STRO ZL + STRO P + STRO LD + STRO 2 TABL 2MH The dimensions are constant regardless of rod diameter or stroke. 0 0 BSPP ⅜ 0 0 Cylinder H0M Code DMH0 DMH02 DMH DMH DMH DMH2 DMH0 DMH DMH DMH DMH DMH DMH DMH DMH2 DMH DMH DMH2 DMH0 DMH DMH2 DMH DMH DMH2 DMH0 DMH DMH2 DOUBL ROD ND CLINDRS Rod B LD P ZL ZM

14 Series MH, Ordering Information CONIUR OUR CLINDR (Series MH Metric Cylinder Nomenclature) 2 eature Description Page No. Double Rod nd D Cylinder Code Refer to Table MH,,, Mounting Style Model Number Only, 8,, 2 Rod nd Style Code Number Inside front cover (iii) Cushions Cylinder Modifications 8 MH2 2 x 2 8 Double Rod nd Cylinder Code (Refer to Table MH) Mounting Style None Rod nd Blind nd Both nds Rod nd Style Note: Use "S" if any special design features are required, describe in detail on your order. xample: Cushions Cylinder Modifications If standard leave blank The code for a MP mount metric hydraulic cylinder with an mm bore, mm rod, Style No. 2 rod end, cushion both ends, standard seals with a mm stroke is MH x Special Seal Polyurethane ( to 0 ) Stroke Specify in millimeters Seal Code No. 2 S Stroke Series MH Series LH Series A Series MN HydPneu Devices Cyl Accessories Manipulators Power Units/alves Design uide

MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar

MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar ISO 00 RISTRD Specials are Our Standard MH NPA MX MH NPA MX MH NPA MX2 ISO MX ISO MX ISO MX2 MH SRIS MH MH MH NPA ISO M M NPA ISO M M NPA ISO M2 MS2 MTRIC HDRAULIC CLINDRS MH NPA ISO MS2 MP MH2 NPA ISO

More information

MC105R2 ISO 9001 REGISTERED

MC105R2 ISO 9001 REGISTERED MC0R ISO 900 RISTRD Table Piston Rod nd Styles (Series H, LH and A) See page 0 for Series MN ROD A B -.00 -.00 C CC *D NA AD A +.00 -.00 AF diameter AC / / / / /- / /-0 /-0 9/ / / / / / / / - / /- /- /

More information

Series H. Milwaukee Cylinder Series H Hydraulic Cylinders. are. built to perform on the toughest applications. Series H is a complete line

Series H. Milwaukee Cylinder Series H Hydraulic Cylinders. are. built to perform on the toughest applications. Series H is a complete line Series H H0 H NPA MX H NPA MX H H NPA M H H H H NPA MT Double Rod nd NPA M H/ H NPA MT H NPA M NPA MS H NPA MT H H NPA MS NPA MP NPA M NPA MS H H NPA M NPA MS NPA MX NPA M H H NPA MX ey Mount NPA MDX Milwaukee

More information

Series LH. Milwaukee Cylinder Series LH Low Pressure Hydraulic Cylinders are built to perform on the toughest applications.

Series LH. Milwaukee Cylinder Series LH Low Pressure Hydraulic Cylinders are built to perform on the toughest applications. Series LH LH0 LH LH LH NPA MX NPA MX0 NPA MX NPA MX LH LH LH LH NPA M NPA M NPA M NPA M LH LH LH LH NPA MS NPA MS NPA MS NPA MS LH NPA MP LH LH LH LH/LH NPA MP NPA MT MT NPA MT NPA MT M Double Rod nd NPA

More information

engineered solutions for hydraulic and pneumatic applications

engineered solutions for hydraulic and pneumatic applications MC0R Series MH ISO Metric Hydraulic Cylinders 0 Series LH Low Pressure Hydraulic Cylinders 0 Series A Pneumatic Cylinders Casting, rolling, or pickling... whatever the demanding application Milwaukee Cylinder

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

Hydraulic Cylinder NFPA Industrial Type

Hydraulic Cylinder NFPA Industrial Type Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart

More information

Series VH Hydraulic Cylinders

Series VH Hydraulic Cylinders Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,

More information

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC

SERIES PSI 5000 PSI NON SHOCK HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL CYLINDERS, INC CYLINDERS, INC SERIES 3000 3000 PSI 5000 PSI NON SHOCK PURAKAL 1234 345 4567 6789 8901 0123 23 PURAKAL 1234567 HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S.Danebo Ave. Eugene, OR 97402-0414

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

2A Pneumatic Cylinders

2A Pneumatic Cylinders A Pneumatic Cylinders Steel-bodied tie rod cylinders for working pressures up to bar Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises mounting styles, to suit

More information

SERIES HH (NFPA) CYLINDER

SERIES HH (NFPA) CYLINDER HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic

More information

Metric Hydraulic Cylinders Series HMI

Metric Hydraulic Cylinders Series HMI Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and

More information

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1 through 8 18 Mounting Styles. Catalog M September, 2011 Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0

More information

PH-3 Series 10" - 20" Bore Heavy-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PH-3 Series 10 - 20 Bore Heavy-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PH- Series 0" - 0" ore Heavy-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features...06 Specifications and Mountings...0 Design Features...0-09 Mounting Information...0- Double Rod Models...

More information

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006

2A Tie Rod Cylinders NFPA Pneumatic Cylinders for working pressures up to 18 bar. Catalogue HY /UK October 2006 A NFPA Pneumatic Cylinders for working pressures up to bar Catalogue HY0-090/UK October 00 Catalogue HY0-090/UK Mounting Styles A Cylinder Mounting Styles The standard range of Parker A cylinders comprises

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

Parker Series 2A Air Cylinder

Parker Series 2A Air Cylinder Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51 Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

Hydraulic cylinders type CH - big bore sizes to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

Hydraulic cylinders type CH - big bore sizes to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar) www.atos.com Table B60-6/ Hydraulic cylinders type CH - big bore sizes to ISO 600- - nominal pressure 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylinders Designer Software for assisted selection of Atos

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

SERIES PSI LINEAR POSITIONING CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC 5000 PSI NON SHOCK

SERIES PSI LINEAR POSITIONING CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC 5000 PSI NON SHOCK CYLINDERS, INC SERIES 3050 3000 PSI 5000 PSI NON SHOCK LINEAR POSITIONING CYLINDER PURAKAL CYLINDERS, INC P.O. Box 22038 1017 S. Danebo Ave. Eugene, OR 97402-0414 Phone (541) 345-4199 FAX (541) 345-6522

More information

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and

More information

HH SERIES. Heavy-Duty Hydraulic Cylinders Pressure Rating 3,000 PSI

HH SERIES. Heavy-Duty Hydraulic Cylinders Pressure Rating 3,000 PSI HH SRIS Heavy-Duty Hydraulic Cylinders Pressure Rating 3,000 PSI Construction 3 Piston Rod Piston rods through 4" diameter have a minimum expected yield of 00,000 psi. They are case hardened to 50 Rockwell

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

Heavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH

Heavy Duty 3500/5000. psi rating. series. hydraulic cylinders.   bulletin 0207XH 3500/5000 psi rating Heavy Duty series XH hydraulic cylinders bulletin 0207XH www.royalcylinders.com 1 Contents Page Description 1 Contents 2 Features Description Mounting Dimensions 3 C Clevis Mount 3

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

Series AM/MM/WM Mill Type Cylinders

Series AM/MM/WM Mill Type Cylinders ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents

More information

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI

MA SERIES. Medium-Duty Pneumatic Cylinders Pressure Rating 200 PSI MA SIS Medium-Duty Pneumatic Cylinders Pressure ating 200 PSI Construction DIMNSIONALL INTCHANGABL TO MT ANSI SPCIFICATIONS 1,2 Head & Cap High strength aluminum alloy is used for both head and cap. They

More information

Series AHM Metric Hydraulic Cylinder

Series AHM Metric Hydraulic Cylinder Series AHM Metric Hydraulic Cylinder As a major supplier of pneumatic and hydraulic cylinders, Atlas Cylinders introduces the Series AHM metric hydraulic cylinder. Atlas Series AHM cylinders are designed

More information

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing

More information

Series MH Hydraulic Cylinders

Series MH Hydraulic Cylinders Series MH Hydraulic Cylinders Atlas Cylinders Tri-Lip Seal Designed To Eliminate Rod Seal Leakage Atlas Cylinders Series MH Heavy Duty Mill Hydraulic Cylinders with the Tri-Lip seal offers positive protection

More information

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11) Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -

More information

JIT Cylinders A Series Catalog

JIT Cylinders A Series Catalog JIT Cylinders A Series Catalog Table of Contents Introduction to Excellence Introduction Page 1 Model Code 2 Cylinder Cross Section 3 Feature, Advantages, Benefits 4 Application Data 5 Cylinder Options

More information

Dimensional Data Clevis / Brackets / Pins / rod Eyes

Dimensional Data Clevis / Brackets / Pins / rod Eyes Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001

More information

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

SERIES TA (NFPA) CYLINDER

SERIES TA (NFPA) CYLINDER Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder

More information

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Hydraulic cylinders type CN - round heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

Hydraulic cylinders type CN - round heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar) www.atos.com Table B80-/E Hydraulic cylinders type CN - round heads with counterflanges to ISO 600- - nominal pressure 6 MPa (60 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

Air Cylinders Type : ISO-6431 & VDMA-24562

Air Cylinders Type : ISO-6431 & VDMA-24562 Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard

More information

AL4 Series Air Cylinder

AL4 Series Air Cylinder L Series ir ylinder atalog M097- February, 00 Up to 0 PSI Bore Sizes -/" through 8" NFP Interchangeable 7 Standard Mounting Styles Series ylinders Up to 0 PSI Permanently lubricated BT & BTM Series ylinders

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H

7 & 8 Bore High Pressure zhc03 Hydraulic Cylinders Series 3H 7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations

More information

Medium Duty Hydraulic Cylinders Series 3L

Medium Duty Hydraulic Cylinders Series 3L Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"

More information

Pneumatic Cylinders NFPA Series

Pneumatic Cylinders NFPA Series Pneumatic Cylinders NFPA Series INDEX: General characteristics 3 Mounting styles 5 Piston rod characteristics (bore diam 25/150) 6 Single rod cylinder dimensions (bore diam 25/150) 8 Piston rod characteristics

More information

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

250 psi rating. series. pneumatic cylinders. bulletin 0606ST. 20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME

More information

HMI/HMD Hydraulic Cylinders

HMI/HMD Hydraulic Cylinders HMI/HMD Hydraulic Cylinders Metric tie rod cylinders for working pressures up to 0 bar Introduction Introduction The HMI and HMD ranges described in this catalogue are Compact Series cylinders to ISO 600/

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Series MH Heavy Duty Mill Hydraulic Cylinder

Series MH Heavy Duty Mill Hydraulic Cylinder Heavy Duty Mill Hydraulic Cylinder Catalog HY0--/NA May, 00 n Meets All NFPA Mounting Dimensions n Heavy Duty Service Mill Type Construction n Nominal Pressure 000 PSI n Standard Bore Sizes -/" through

More information

Optimized for OEM requirements at a lower price.

Optimized for OEM requirements at a lower price. The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

Hydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)

Hydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar) www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of

More information

Class 3. High Pressure Square-Head Cylinders CLASS 3

Class 3. High Pressure Square-Head Cylinders CLASS 3 Class High Pressure Square-Head Cylinders CLSS Options, Modifications and Ordering Information Options Bore Size Selection Unlike air applications, the output force of a cylinder for hydraulic service

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard)

Features. when stopping. Various mounting styles. Rod type. Bore size (Heavy Duty) (Standard) Features Symbol Standard tie rod type hydraulic cylinder Double acting hydraulic cylinder for 70 kgf/cm 2 or 140kgf/cm 2 with bore sizes from 40 to 250. High performance cushion to reduce shock Double

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE NFPA Industrial Type Cylinders TaskMaster Pneumatic Cylinders (to 200 psi) 1 1/2" - 4" Bores 5" & 6" Bores Profile Design External Tie Rods PowerMaster

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

3MA/4MA Series Non-Lube NFPA Air Cylinders

3MA/4MA Series Non-Lube NFPA Air Cylinders MA/MA Series Non-Lube NFPA C S MNR MAJ/MAJ ACV MA/MA Contents MA Series -/" to 5" ore... 5-0 MA Series -/" to 5" ore... -5 How to Select a MA or MA Cylinder...6 MA asic Dimensions -/" to 5" ore... 7-8

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

The Price Alternative Pneumatic Cylinders and Slides

The Price Alternative Pneumatic Cylinders and Slides The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES

More information

ZBD 2512 Differential Cylinder Data sheet 07.16/DS13660

ZBD 2512 Differential Cylinder Data sheet 07.16/DS13660 ZBD 2512 Differential Cylinder Data sheet 07./DS Description: The STORZ hydraulic cylinder series ZBD 2512 for the nominal pressure of 250 bar is replaceable with the CDH1 series. By fixing the mounting

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

Linear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to

Linear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to ylinder ccessories Page Linear lignment oupler MLOK Rod lamp Flange ouplers and Weld Plates Spherical Rod ccessories 19 150-151 15 15 Milwaukee ylinder provides various cylinder accessories to maximize

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

HMI/HMD Tie Rod Cylinders HMI Metric Cylinders to ISO 6020/2 (1991) HMD Metric Cylinders to DIN For working pressures up to 210 bar

HMI/HMD Tie Rod Cylinders HMI Metric Cylinders to ISO 6020/2 (1991) HMD Metric Cylinders to DIN For working pressures up to 210 bar HMI/HMD HMI Metric Cylinders to ISO 600/ (99) HMD Metric Cylinders to DIN 4 554 For working pressures up to 0 bar Catalogue HY07-/UK September 005 Introduction Introduction The HMI and HMD ranges described

More information

Series LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00

Series LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00 Series L Industrial Interchangeable Pneumatic ylinders atalog L- 0/00 Model Numbers Lin-ct Series L Series L Model Numbers How to Develop Them How to Decode Them Lin-ct Series L cylinders can be completely

More information

TAS SERIES TAB

TAS SERIES TAB TAS SERIES TAB 101 HH - Heavy Duty Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES TAS (NFPA) CYLINDER Duty s Reduces cylinder

More information

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.

More information

Series MN. Milwaukee Cylinder Series MN Aluminum Cylinders are. of heavy duty construction in ten bore sizes (1-1/2" up to 12").

Series MN. Milwaukee Cylinder Series MN Aluminum Cylinders are. of heavy duty construction in ten bore sizes (1-1/2 up to 12). Series MN MN0 MN MN MN NFPA MX NFPA MX0 NFPA MX NFPA MX MN MN MN MN NFPA MF MF NFPA MF MF NFPA ME MF NFPA ME MF MN MN MN NFPA MS MS NFPA MS MS7 NFPA MS MS MN7 MN7 MN7 NFPA MT NFPA MT NFPA MT MN NFPA MP

More information

Cylinders Small Bore Tie Rod

Cylinders Small Bore Tie Rod Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:

More information

CYLINDERS OPTIONS ACCESSORIES

CYLINDERS OPTIONS ACCESSORIES CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount

More information

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2 THRU 2 BORE SIZE MAXIMUM PSI 250 SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE

More information

Cylinders. Series TV Cylinders ISO and DIN Interchangeable Nominal Pressure: 160 bar Hydraulic Working Pressure: Up to 210 bar Hydraulic

Cylinders. Series TV Cylinders ISO and DIN Interchangeable Nominal Pressure: 160 bar Hydraulic Working Pressure: Up to 210 bar Hydraulic Vickers Cylinders Series TV Cylinders ISO 0-2 and DIN 4 Interchangeable Nominal Pressure: bar Hydraulic Working Pressure: Up to 2 bar Hydraulic Revised / 447 Vickers, Incorporated All Rights Reserved Features

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life. CTUTORS NFP Series luminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals djustable captive cushion needle Ecology cylinders meet OSH noise standards Constructed of the finest materials

More information

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting > > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance

More information

Medium Duty Hydraulic Cylinders. Series 3L

Medium Duty Hydraulic Cylinders. Series 3L Medium Duty Hydraulic Cylinders Series L Catalog HY08-0-6/NA Series L In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

Hydraulic cylinder Tie rod design

Hydraulic cylinder Tie rod design Hydraulic cylinder Tie rod design Series CDT3 Z; CGT3 Z; CST3 Z Component series Nominal pressure bar (6 MPa) Table of contents Contents Page Features Technical data 3 Information on stroke length and

More information

1/96 N Our policy is one of continued research and development. We therefore reserve the right

1/96 N Our policy is one of continued research and development. We therefore reserve the right Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide

More information