Series HB Solid Brass Cylinders

Size: px
Start display at page:

Download "Series HB Solid Brass Cylinders"

Transcription

1 Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity switches. Pressure energized wear compensating cup type piston seals on all models and bore sizes with one exception: bore oversize piston rod model has an O ring piston seal. Solid brass heads and caps are precision machined. Threaded construction provides a clean and compact exterior. Brass piston is silver brazed to the rod for an almost indestructible joint. Tube is heavy wall brass honed to insure proper size, roundness, and finish for maximun cylinder life.,, /8 Bore Cylinders have four lobed rod seal. /, Bore Cylinders have cup type rod seal. A natural choice where moisture is a problem. A U R O R A A I R P R O U C T S 6

2 AITIONAL SIGN ATURS SHOCK PAS Reduce noise and fatigue problems such as rod breakage with energy absorbing shock pads. Add / to the cylinder length for each pad. or pneumatic use only to 80. RO WIPRS Prolong the life of cylinders operating in dirty environments by adding rod wipers. Polyurethane or Viton wipers are wear compensating and effectively prevent damaging contaminants from entering the critical rod seal/rod bushing area. Limited availability. SAL COMPOUNS Standard cylinders contain buna n (nitrile) seals and polyurethane wipers which are compatible with most lubricants and fluids, and can withstand temperatures from 0 to +00. Viton seals and wipers may be ordered for temperatures ranging from 0 to +00 and for added chemical resistance. Long Life seals will provide significantly increased service life due to their excellent abrasion resistance. luid compatibility is identical to buna n seals and their effective temperature range is Long life rod seals are standard on all,, /8 bore cylinders. HYRAULIC SALS Rod seal weepage can be substantially reduced by specifying polypak rod seals. They are available on all / and bore cylinders. or availability on other bore sizes consult factory. HAR CHROM PISTON RO The standard rod in all HB cylinders is ground and polished type 0 stainless steel. Hard chrome plated steel rods are available. The plating gives the rod a very hard scratch resistant surface which increases the wear life of the rod, rod bushing, and rod seal. The result is increased cycle life on all cylinders and improved sealability on hydraulic cylinders. PISTON RO THRAS Rods are stocked with both fine and coarse male threads as listed in the ordering procedure. Almost any special thread female, metric, etc. can be produced to customer requirements in just a day or so for a modest extra charge. emale thread depth: #0, /, 5/6, /8 threads are 5/8 deep. /, 5/8, threads are / deep. Threads smaller than the nominal rod diameter will be per the photo unless otherwise noted. PIVOT BUSHING All HB caps have a stainless steel pivot bushing. STOP TUB Stop tubes are spacers between the piston and the cylinder head which prevent the piston from fully extending. This will reduce the bearing loads by increasing the distance between bearing points. Stop tubes should be used on long stroke cylinders and on cylinders where side load is a concern. See ordering procedure for available lengths. Also consider SMA aluminum cylinders for long strokes and side load conditions. AJUSTABL CUSHIONS Reduce noise and decelerate the piston at the end of stroke. Aurora s cup type cushion seal provides positive cushioning yet allows a high flow rate when reversing for minimum cycle time. A stainless steel metering screw offers simple adjustment of the cushion rate. The adjusting screw is fully recessed and self locking on / and bore cylinders. The adjusting screw on /8 bore cylinders is locked in place by a low profile nut. SHOCK PAS RO WIPRS MAL RO THRAS PR CATALOG UNLSS SPCII SPCIAL IAMTR MAL THRAS PR CATALOG UNLSS SPCII / PIVOT BUSHING Series HB BRASS Polypak is a registered trademark of Parker Hannifin 6

3 /8 BOR HB BRASS 00 PSI MAX. AIR 500 PSI MAX. HY. Non shock HB /8 LATS / + STROK / HX / /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/6 + STROK / HX /6 / / Single Acting Cylinders Pneumatic only Adds to cylinder length Add to Add to TYP STROK cyl. O.A.L. STROK cyl. O.A.L. Spring return 0-5/8 - Spring extend Spring orce: Spring fully extended approx. # Spring fully compressed approx. 0# Spring fully compressed approx. # Wrench lats 0- / / Not available over / stroke Optional 5 A B..0 HB STAINLSS BUSHING I. /6 /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/6 + STROK / / / HX RO A B 5/6.50 / /8. / /. / Nose Mounting Nut Included with Cylinder A B HB9 STAINLSS BUSHING. I..6 /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/6 + STROK / / HX TH A B 5/8 8 5/6 /8 6 /8 /6 5/6 /6 HB- 5/6 8 Thread HB-5 /8 Thread /8 /6 / Rod Clevis & Nut / SQUAR / HB 5/8-8 /8.68 PILOT C PILOT x /6.68 x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/6 + STROK / / HX.5 HB-500 Rod Clevis & Nut / 0 Thread / 5/6 /8 SQ /-0 THRA /8 HB 0 5/6 Standard / Oversize 5/ PILOT x /6 /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/8 8 5/8 8 6 C PILOT COMBINATIONS.68/68.68/.68./.5.9/.9.9/.9 Part No. G H. HB-00 Clevis Pin Used on HB-, 5 HB-50 Clevis Pin Used on HB Stainless Cushions not available on cylinders with / diameter rod.

4 HOUR LIVRY TM HB Options 5/6 + STROK / / HX Shock Pads Wrench lats Viton or Long Life Seals Chrome Rod Magnetic Piston Hollow Rod Adjustable Cushions /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY HB5 HB-0 lange Bracket Used on HB,,, 5, 6 /8 /6 /6 TYP. HB-0 oot Bracket Used on HB,,, 5, 6 " R. /.68.9 HOLS /8 5/8 / HOLS / 5/8 9/ / + STROK 5/6 + STROK /8 / C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY /6 + STROK /8 9/6 / HX /6 + STROK /6 C PILOT /8 TYP. x /6. TYP.. /6 / HX / HX / / HB6 HB HB-0 Clevis Bracket Used on HB, 9 5/6 R..8 HOLS PR PART 5/6 5/8.5 / /8 /6 HB-0T Trunnion Bracket Used on HB, 8, 9 5/6 R..8 HOLS PR PART 5/6 5/8.5 / /8 /6 5/6 5/6 / HX 5/6 Standard / Oversize /8 / + STR C PILOT x /6 9/6 5/8 8 5/8 8 6 /6 + STROK /8 9/6 C PILOT x /6 /8 TYP.. TYP.. /6 C PILOT COMBINATIONS.68/68.68/.68./.5 HB5, 6 Only.9/.9 HB5, 6 Only.9/.9 /8 TYP.. TYP.. HB8 / HB9 Part No. G H Series HB BRASS

5 /8 BOR HB BRASS HOUR LIVRY /6 + STR BL ACTING / /.50 Single Acting Cylinders Pneumatic only Adds to cylinder length Add to Add to TYP STROK cyl. O.A.L. STROK cyl. O.A.L. Spring return 0- / 5/8 - Spring extend 0- / Not available over / stroke HB0 / HX /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW 9/ RILL, LOCATION AN AVAILABILITY 6 HOLS 5/ + STR BL ACTING / / SQUAR Spring orce: Spring fully extended approx. # Spring fully compressed approx. 0# Spring fully compressed approx. # Wrench lats Optional / 5 A B HB.50 9/6 9/ /8 C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/ + STROK / / SQUAR 9/ RILL, 6 HOLS.50 RO A B 5/6.50 / /8. / /. / HB- 5/6 8 Thread HB-5 /8 Thread /8 /6 / Rod Clevis & Nut / SQUAR / HB.50 SQUAR /8 9/ RILL, HOLS C PILOT x /6 INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY.50 9/6 9/ 5/6 + STROK / / HX.5 HB-500 Rod Clevis & Nut / 0 Thread / 5/6 /8 TYP. SQ /-0 THRA /8.50 TYP. HB SQUAR.50 9/ RILL, 6 HOLS + STR / /8 B NOS THRA C PILOT INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY / + STR BL ACTING / / /. HB-00 Clevis Pin Assembly Used on HB-, HB-5 HB-50 Clevis Pin Assembly Used on HB HB 5/6 Standard / Oversize SQ /8 9/ RILL, HOLS INICATS AJUSTABL CUSHION SCRW LOCATION AN AVAILABILITY 5/8 8 5/8 8 6 C PILOT x /6 C PILOT COMBINATIONS.68/68.68/.68 HB Only./.5.9/.9 HB Only.9/.9 Part No. G H Cushions not available on cylinders with / diameter rod. Back to Back Three Position Tandems Adjustable Stroke Spherical Mount Non-Rotate All from Stock in the SMA Section

6 ORRING PROCUR HB Brass Select code numbers/letters (bold type) from each of the six boxes below - then select any options desired from the opposite page. List codes in the same sequence as shown. The cylinder part number is an alpha numeric code. Bore Type Single Acting Spring return Single Acting Spring extend ouble acting Adds to cyl. length If double rod end model (HB6, 9,) is to be single acting, select A A B C Bore size /8 / Piston Rod iameter / Nose Mount Combinations Rod dia. Mounting Style of Cylinder Head Pilot dia. / 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 5/6 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 5/6 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 /8 5/8-8 Nose Mount / Sq. Mount.68/.68 /8-6 Nose Mount / Sq. Head Mount.5/. 5/6 5/8-8 Nose Mount / Sq. Head Mount / Sq. Mount.68/.68 /8 5/8-8 Nose Mount / Sq. Mount.68/.68 /8-6 Nose Mount / Sq. Head Mount.5/. /8 - Nose Mount.9/.9 / - Nose Mount / Sq. Head Mount / Sq. Mount.9/.9 / - Nose Mount / Sq. Head Mount / Sq. Mount./. /- Nose Mount / Sq. Mount./. Sq. Head Mount./. 5/8 /- Nose Mount / Sq. Head Mount / Sq. Mount./. /- Nose Mount / Sq. Head Mount / Sq. Mount./. G H " " /8" /" " Mounting Style/ HB HB HB 9 HB HB HB 5 HB 6 HB HB 8 HB 9 HB 0 HB HB HB HB Stroke is stroke in total /8" increments xample: " stroke = 8 /" stroke = 0 Piston Rod Threads HB6, HB9, HB ouble rod models have same rod thread both ends Cyl. bore All /8 / Rod dia. Rod th'd All Plain Rod /-0 x 5/8 /-8 x 5/8 5/6-8 x 5/8 5/6- x 5/8 5/6-8 x 5/8 5/6- x 5/8 /8-6 x 5/8 /8- x 5/8 5/6-8 x 5/8 5/6- x 5/8 /8-6 x 5/8 /8- x 5/8 /- x 5/8 /-0 x 5/8 /- x /-0 x x x 0 5/8- x / 5/8-8 x /.50-0 x / x / 0

7 TM Series HB cylinder options List codes in the same sequence as they appear below Option escription xtra rod extension Specify code letter J followed by the extra length as a two place decimal. xample: J.50 = /" extra J.5 = /"extra HB6, 9, double rod cylinders with extra extension cannot be ordered by a standard part number - consult factory for a special part number. Wrench flats Shock pads Rod wiper Optional seal compounds Polypak rod seal Specify if required If specified will be added to both ends of HB6, HB9, HB double rod cylinders Available on both ends of double acting cylinders and the end opposite the spring on single acting cylinders. ach pad adds /" to cylinder length. Pneumatic use only to 80 Pad on rod end only Pad on cap end only Pads on both ends ", " bor e - Not available /8" bore - Available only with /8" rod, - nose mount /, " bore - Available all models - standard with trunnion & adj. cushion heads St'd seals are buna (nitrile) and require no code 0 to +00 Long life available for extended cycle life +0 to +00 Viton available for temps 0 to +00 or optimum sealing on hydraulic cylinders Available only in / and " bore sizes J K L M N P Q R S Hard chromed rod Hard chrome plated steel - 00,000 min. yield T Magnetic piston Option Not available in " bore Adds /" to cylinder length W Hollow piston rod Available in 5/6 dia. rod thru hole.5" Available in /8 dia. rod thru hole.8" Not available on hard chrome rods X Available in / dia. rod thru hole." Stop tube Available on / & " bore only in " increments Specify code Y followed by length in inches xample: Y = " stop tube Adds to cylinder length. An 8" stroke cyl. with " stop tube will be as long as a 0" stoke cylinder. Order actual stroke req. (8" above) Not avail. HB6, 9, or with adj. cushions Oversize ports / NPT ports on / bore cylinder (both ends) Z Y Adjustable Cushions Available on /8, /, " bore except as follows: Mounting styles HB, 8, 9 Rear port cap on mt'g styles HB,, 0 Cyl. with /" or " oversize rods or oversize ports Cylinders with shock pads Cushion head end only Cushion cap end only Cushion both ends AA BB CC Part No. xample: -5" bore Mounting style HB " stroke /8- x 5/8 th'd rod HB C 6 6 K W ouble acting Magnetic piston Wrench flats /8 rod, 5/8-8 nose mount 8

8 HB Brass SRVIC PARTS / " B o r e S e r v i c e P a r t s Key escription Part Number Key escription Part Number Seal Kit, Buna 05-B 9 Spring stop /" rod pair Seal Kit, Long life 05-LL 9 Spring stop 5/6" rod pair 05- Seal Kit, Viton 05-V 0 Spring - Must supply cyl. stroke 055 Rear port cap Rear pivot cap 90 Rear pivot cap Head / rod Head 5/6 rod Head / rod TRN 5 6 Rear stud cap Tube - P.N. is T followed by the complete cyl. part no Head 5/6 rod Head / rod Head 5/6 rod Magnet Shock pad pair 050- TRN SS0 5MSP 8 Rod - P.N. is PR followed by the complete cyl. part no. " B o r e S e r v i c e P a r t s Key escription Part Number Key escription Part Number Seal Kit, Buna 00-B 9 Spring stop 5/6" rod pair 00- Seal Kit, Long life 00-LL 9 Spring stop /8" rod pair 00-5 Seal Kit, Viton 00-V 0 Spring Head 5/6 rod, 5/8-8 nose Head /8 rod, 5/8-8 nose Head /8 rod, - 6 nose Tube - P.N. is T followed by the complete cyl. part no Head 5/6 rod, 5/8-8 nose Head /8 rod, 5/8-8 nose Head 5/6 rod Head /8 rod 000-TRN 000-5TRN Rod - P.N. is PR followed by the complete cyl. part no. / 8 " B o r e S e r v i c e P a r t s Key escription Part Number Key escription Part Number Seal Kit, Buna, 5/6 rod -B 0 Spring 0 - /" Stroke 5 Seal Kit, Buna, /8 rod -5B 0 Spring 0ver - /" Stroke 005 Seal Kit, Buna, / rod -500B Head, 5/6 Rod, 5/8-8 Nose Seal Kit, Long life, 5/6 rod -LL Head, 5/6 Rod, 5/8-8 Nose, Cushion 5--65C Seal Kit, Long life, /8 rod -5LL Head, /8 Rod, 5/8-8 Nose Seal Kit, Long life, / rod -500LL Head, /8 Rod, 5/8-8 Nose, Cushion C Seal Kit, Viton, 5/6 rod -V Head, /8 Rod, - 6 Nose Seal Kit, Viton, /8 rod -5V Head, /8 Rod - 6 Nose, Cushion C Seal Kit, Viton, / rod -500V Head, /8 Rod - Nose Head, /8 rod, - nose, cushion C Add suffix C for cushion 06 Head, /8 rod, - nose, wiper W 90 Add suffix C for cushion 0690 Head, / rod, - nose

9 / 8 " B o r e S e r v i c e P a r t s (Cont.) Key escription Part Number Key escription Part Number Add suffix C for cushion 0 08 Head, 5/6 rod, 5/8-8 nose Head, /8 rod, 5/8-8 nose 5-TRN 5-5TRN 5 Add suffix C for cushion 09 Head, / rod, - nose TRN 6 Add suffix C for cushion 5 Head, 5/6 rod - 8 Tube P.N. is T followed by the complete cyl. P.N. Rod P.N. is PR followed by the complete cyl. P.N. Head, 5/6 rod, cushion Head, /8 rod -C -5 9 Stop 5/6 rod, 0 /" stroke - Head, /8 rod, cushion -5C 9 Stop 5/6 rod, over /" stroke (pair) 00- Head, / rod Stop /8 rod, 0 /" stroke -5 Magnet pair SMS59 9 Stop /8 rod, over /" stroke (pair) Screw ass'y Add suffix V for Viton 9 Stop / rod, 0 /" stroke Shock pad MSP 9 Stop / rod, over /" stroke (pair) / " B o r e S e r v i c e P a r t s Add suffix HY to seal kit part no. if polypak hyd. rod seal is required Seal Kit, Buna, / rod B Seal Kit, Buna, rod 50-50B Seal Kit, Longlife, / rod LL Seal Kit, Longlife, rod 50-50LL Seal Kit, Viton, / rod V Seal Kit, Viton, rod 50-50V /" port add suffix C for cushion 5006 /" port add suffix C for cushion /" port add suffix C for cushion 500 /" port /" port add suffix C for cushion /" port add suffix C for cushion /" port Tube - P.N. is T followed by the complete cyl. part no. 8 Rod - P.N. is PR followed by the complete cyl. part no. 9 Stop, / rod, st'd pair Stop, / rod, spring extend over " str L 9 Stop rod, st'd pair Stop rod, spring extend over " str L Add suffix HY to seal kit part no. if polypak hyd. rod seal is required Seal Kit, Buna, 5/8 rod 00-65B Seal Kit, Buna, rod 00-50B Seal Kit, Long life, 5/8 rod 00-65LL Seal Kit, Long life, rod 00-50LL Seal Kit, Viton, 5/8 rod 00-65V Seal Kit, Viton, rod 00-50V 000 add suffix C for cushion add suffix C for cushion add suffix C for cushion add suffix C for cushion add suffix C for cushion 005 Tube - P.N. is T followed by the complete cyl. part no. 8 Rod - P.N. is PR followed by the complete cyl. part no. 9 Stop, 5/8 rod, st'd pair Stop, 5/8 rod, spring extend over " str L 0 St'd spring Spring, over " spring extend only 505L Head, / rod Head, / rod, / port Head, / rod, wiper W Head, / rod, / port, wiper W Head, / rod, cushion C Head, rod Head, rod, / port Head, rod, wiper W Head, rod, / port, wiper W Head, / rod TRN Head, rod TRN Head, / rod, / port TRN Head, rod, / port TRN Head, / rod Head, / rod, / port Head, / rod, wiper W Head, / rod, / port, wiper W Head, / rod, cushion C Head, rod Head, rod, / port Head, rod, wiper 50-50W Head, rod, / port, wiper W Magnet pair SS5 6 Shock pad 5MSP " B o r e S e r v i c e P a r t s 9 Stop, rod, st'd pair Stop, rod, spring extend over " str L 0 St'd spring Spring 0ver - " spring extend only 005L Head, 5/8 Rod Head, 5/8 Rod, wiper W Head, 5/8 Rod, Cushion Head, Head, Rod, wiper Head, 5/8 Rod C W TRN Head, Rod Head, 5/8 Rod, wiper TRN Head, 5/8 Rod, wiper 00-65W Head, 5/8 Rod, cushion 00-65C Head, Rod Head, Rod, wiper 00-50W 6 Magnet pair SS0 Shock pad MSP 8

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series SS Solid Stainless Cylinders

Series SS Solid Stainless Cylinders Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

QUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless

QUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series

More information

Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER

Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.

More information

Series VH Hydraulic Cylinders

Series VH Hydraulic Cylinders Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

* Screw clearance to allow bolt head to pass through - no counter bores

* Screw clearance to allow bolt head to pass through - no counter bores Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators

RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16 to 2 bore Double acting pneumatic actuators RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application

More information

Flat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders

More information

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Medium Duty Hydraulic Cylinders Series 3L

Medium Duty Hydraulic Cylinders Series 3L Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"

More information

Table of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5

Table of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5 With Continuous Position Feedback Catalog AU08-0971/NA September, 2002! Compact Design! Highly Accurate Position Feedback Capability! Electronic Controllers Available! 5 Bore Sizes Table of Contents General

More information

Parker Series 2A Air Cylinder

Parker Series 2A Air Cylinder Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.

More information

Provenair Series AN Cylinders Parts List / Service Instructions

Provenair Series AN Cylinders Parts List / Service Instructions Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square

More information

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51 Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.

More information

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)

Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11) Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -

More information

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA) BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED

More information

Series AM/MM/WM Mill Type Cylinders

Series AM/MM/WM Mill Type Cylinders ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents

More information

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type

Series 25A-CJ2. Air Cylinder: Standard Type Double Acting, Single Rod. ø10, ø16 25A. How to Order. Auto switch mounting type Series -J2 ø0, ø6 magnet for switch, auto switch cannot be mounted. E M asic ouble-side bossed ouble clevis Single foot ouble foot ore size 0 0 mm 6 6 mm J2 6 60 Z M9W bracket is shipped together with

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

SRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback

SRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical

More information

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16 or 3/8 Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated

More information

Air Cylinders Type : ISO-6431 & VDMA-24562

Air Cylinders Type : ISO-6431 & VDMA-24562 Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard

More information

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,

More information

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available. AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors

More information

The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!

The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

HTR TIE-ROD CYLINDERS H I K M N TUBE OD

HTR TIE-ROD CYLINDERS H I K M N TUBE OD 1 Brand Cylinders LINE THE HTR Pressure Ratings: 2" - 4" Bore = 2500 PSI, 5" Bore = 2000 PSI BORE (INCH) B C D E F G = J 2.0 1.015 2.125 1.625 1.000 1.000 1.142 2.5 1.015 2.125 1.625 1.000 1.000 1.142

More information

Four Shaft Linear Thrusters

Four Shaft Linear Thrusters Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

FULL COLOR TAB #12 BTP

FULL COLOR TAB #12 BTP FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage

More information

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72

Series MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72 Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic

More information

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2 THRU 2 BORE SIZE MAXIMUM PSI 250 SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE

More information

Pneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke

Pneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke Bonesi Series Pneumatic Cylinders VMA 24562 ISO 6431 SERIES CX Light alloy end caps painted gray. Clean profile aluminium body gauged inside and outside. Bore size 32-40-50-63-80-100-125 Available with

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

STAINLESS STEEL CYLINDER CONSTRUCTION

STAINLESS STEEL CYLINDER CONSTRUCTION STAINLESS STEEL CYLINDER CONSTRUCTION In the early 950 s, Clippard introduced miniature pneumatic cylinders and valves to industry. No other manufacturer can boast of the same experience or knowledge of

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1 through 8 18 Mounting Styles. Catalog M September, 2011 Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0

More information

SERIES HH (NFPA) CYLINDER

SERIES HH (NFPA) CYLINDER HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic

More information

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P. Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials

More information

PTR Series Pneumatic Rack & Pinion Rotary Actuator

PTR Series Pneumatic Rack & Pinion Rotary Actuator zact14 Pneumatic Rack & Pinion Rotary Actuator Contents Features... 2 Specifications... 3 Dimensions... 4 Mounting Options... 5 Shaft Options... 6 Port Size and Location... 7 Cushions and Bumpers... 8

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

Flat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power)

Flat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power) Flat Cylinders Flat-1 2.3-2.11 SquareFlat-1 2.12-2.18 Flat-11 2.19-2.23 SquareFlat-11 2.24-2.28 FO2, FO3, FO4(multiple power) 2.29-2.34 FOP(multiple position) 2.35-2.41 Flat Accessories 2.42-2.43 EF1 Cylinders

More information

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE

AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE AIR AND HYDRAULIC CYLINDERS NFPA INDUSTRIAL TYPE NFPA Industrial Type Cylinders TaskMaster Pneumatic Cylinders (to 200 psi) 1 1/2" - 4" Bores 5" & 6" Bores Profile Design External Tie Rods PowerMaster

More information

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

Medium Duty Hydraulic Cylinders. Series 3L

Medium Duty Hydraulic Cylinders. Series 3L Medium Duty Hydraulic Cylinders Series L Catalog HY08-0-6/NA Series L In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

Heavy Duty Bench Top Presses

Heavy Duty Bench Top Presses Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown

More information

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

More information

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1 NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need

More information

Table of Contents ISO

Table of Contents ISO Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10

More information

Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE

Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for

More information

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic

More information

Optimized for OEM requirements at a lower price.

Optimized for OEM requirements at a lower price. The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO

More information

KRONES DIRECT REPLACEMENTS

KRONES DIRECT REPLACEMENTS PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE

More information

Cylinders Small Bore Tie Rod

Cylinders Small Bore Tie Rod Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:

More information

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life.

wiper seal keeps contaminates from getting into cylinder by aggressively wiping foreign materials from the piston rod, enhancing the rod seal life. NPA Aluminum & Steel Cylinders NPA Series A Aluminum & J Steel Cylinders 1-1/2 to 12 inch bore size Impact dampening seals Adjustable captive cushion needle Ecology cylinders meet OSHA noise standards

More information

Original & T Series 8 Bores, 1/2" 4" Features & Benefits General, Standard Specifications

Original & T Series 8 Bores, 1/2 4 Features & Benefits General, Standard Specifications Original & T Series 8 Bores, /2" 4" Section Index Features & Benefits....2 General, Standard Specifications....2 Page Construction Details....3,.4 How a Pancake is built Information....5,.6 How a Pancake

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

RP SERIES 200 psi Mill-type Cylinder

RP SERIES 200 psi Mill-type Cylinder Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Bimba Original Line - Stainless Steel Body Air Cylinders

Bimba Original Line - Stainless Steel Body Air Cylinders Bimba Original Line - Stainless Steel Body Air Cylinders How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

TELESCOPIC DOUBLE ACTING

TELESCOPIC DOUBLE ACTING GRAL SPCIICATIOS Our telescopic double acting metric range of hydraulic rams are designed for heavy duty industrial service. By utilising welded construction and our many years of experience, combined

More information

MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar

MH SERIES METRIC HYDRAULIC CYLINDERS. Specials are Our Standard. ISO standard 6020/2-160 bar series For working pressures up to 210 bar ISO 00 RISTRD Specials are Our Standard MH NPA MX MH NPA MX MH NPA MX2 ISO MX ISO MX ISO MX2 MH SRIS MH MH MH NPA ISO M M NPA ISO M M NPA ISO M2 MS2 MTRIC HDRAULIC CLINDRS MH NPA ISO MS2 MP MH2 NPA ISO

More information

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F

More information

(F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) (EN***)

(F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) (EN***) Service Data Vickers Directional Valves Pilot Operated Directional Valves (F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) - 10

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

The Price Alternative Pneumatic Cylinders and Slides

The Price Alternative Pneumatic Cylinders and Slides The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES

More information

Maintenance Instructions & Parts List

Maintenance Instructions & Parts List PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5 atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product

More information

Compact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements

Compact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements ompact cylinders Fixing dimensions are compliant to norm 431 or Suitable for standard fixing elements igh reliability and long lifetime Standard magnetic version Special strokes on request aterials arrel:

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and

More information

CYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS

CYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free

More information

7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H

7 & 8 Bore High Pressure zhc03 Hydraulic Cylinders Series 3H 7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.

More information

Bladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle

Bladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle LADDER PRODUCTS za03 ottom Repairable Top Repairable Medium Flow High Flow Transfer arrier Gas ottle Features: Operating Pressures to 6600 PSI Ten Different Capacities from 10 cu in to 15 gallons Nine

More information

Parallel Grippers. Body One piece anodized aluminum body

Parallel Grippers. Body One piece anodized aluminum body Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for

More information

Metric Hydraulic Cylinders Series HMI

Metric Hydraulic Cylinders Series HMI Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and

More information

Couplings - Quick Disconnect

Couplings - Quick Disconnect ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial

More information

L3 SERIES COMPACT PUMPS

L3 SERIES COMPACT PUMPS L3 SERIES COMPACT PUMPS PORTABLE ECONOMICAL LIGHTWEIGHT EASY TO INSTALL & OPERATE REQUIRES NO LUBRICATION IDEAL FOR OEM APPLICATIONS SC air driven compact liquid pumps operate on the principal of differential

More information

JIT Cylinders A Series Catalog

JIT Cylinders A Series Catalog JIT Cylinders A Series Catalog Table of Contents Introduction to Excellence Introduction Page 1 Model Code 2 Cylinder Cross Section 3 Feature, Advantages, Benefits 4 Application Data 5 Cylinder Options

More information